The candy provides 4.04 nutritional calories per gram.
The researcher used a bomb calorimeter to determine the nutritional value of the candy. The nutritional value refers to the amount of energy that a food provides to the body when it is consumed. This energy is typically measured in calories, which are a unit of energy.
To determine the nutritional value of the candy, the researcher placed a 3.60 g sample of the candy in the bomb calorimeter and combusted it in excess oxygen. The observed temperature increase was 2.07 ∘C, and the heat capacity of the calorimeter was 29.40 kj⋅k−1.
Using these values, the researcher can calculate the number of nutritional calories per gram of the candy.
To do this, the researcher needs to use the following equation:
q = C × ΔT
where q is the heat released by the combustion of the candy, C is the heat capacity of the calorimeter, and ΔT is the observed temperature increase. By rearranging this equation, the researcher can solve for the heat released by the combustion:
q = C × ΔT
q = (29.40 kj⋅k−1) × (2.07 ∘C)
q = 60.93 kJ
To convert this value to nutritional calories per gram of the candy, the researcher needs to divide by the mass of the candy:
60.93 kJ / 3.60 g = 16.92 kJ/g
Finally, the researcher can convert this value to nutritional calories by dividing by 4.184 (the conversion factor between kJ and nutritional calories):
16.92 kJ/g / 4.184 = 4.04 nutritional calories per gram of the candy.
Therefore, the candy provides 4.04 nutritional calories per gram.
To know more about nutritional calories, visit:
https://brainly.com/question/2713545#
#SPJ11
which of the following options correctly describe the oxidation of primary alcohols? select all that apply. multiple select question. primary alcohols require different oxidizing conditions than secondary alcohols. a carboxylic acid can be produced by oxidation of a primary alcohol. during oxidation, a primary alcohol will rearrange to produce a more substituted oxidation product. mild oxidizing conditions will result in an aldehyde product. harsher oxidizing conditions will produce a ketone from a primary alcohol.
The options that describe the oxidation of the primary alcohols is a carboxylic acid can be produced by oxidation of a primary alcohol. Mild oxidizing conditions will result in an aldehyde product.
The Primary alcohols will be oxidized to form the aldehydes and the carboxylic acids. The secondary alcohols will be oxidized to give the ketones. The Tertiary alcohols, in the contrast, cannot be oxidized by without breaking the molecules of the C–C bonds.
The Primary alcohols and the aldehydes will be normally oxidized to the carboxylic acids using the potassium dichromate solution in the presence of the dilute sulfuric acid that is H₂SO₄.
To learn more about oxidation here
https://brainly.com/question/21795438
#SPJ4
How would each of the following changes alter the equilibrium position of the system used to produce methanol from carbon monoxide and hydrogen?
CO(g) + 2H2 CH3OH(g) + heat
The equilibrium position of the system used to produce methanol from carbon monoxide and hydrogen can be altered by a change in the concentration of any of the reactants or products, a change in temperature, or a change in pressure.
If the concentration of carbon monoxide or hydrogen is increased, then the equilibrium position will shift to the right, favoring the formation of methanol. Conversely, if the concentration of methanol is increased, then the equilibrium position will shift to the left, favoring the decomposition of methanol into carbon monoxide and hydrogen.
If the temperature is increased, then the equilibrium position will shift to the right, as the forward reaction is exothermic and the reverse reaction is endothermic. Conversely, if the temperature is decreased, then the equilibrium position will shift to the left.
If the pressure is increased, then the equilibrium position will shift to the side with fewer moles of gas. In this case, both the reactants and the products have the same number of moles of gas, so the pressure will have no effect on the equilibrium position.
In summary, changes in concentration, temperature, and pressure can all alter the equilibrium position of the system used to produce methanol from carbon monoxide and hydrogen. By understanding how these changes affect the system, it is possible to manipulate the equilibrium position to maximize the yield of methanol.
To know more about carbon monoxide, visit:
https://brainly.com/question/22530423#
#SPJ11
A large pile of marbles weigh 592. 45g. 15 marbles weigh 43. 35 g. How
many marbles are in the large pile
There are approximately 205 marbles in the large pile that weighs 592.45 g.
To determine the number of marbles in the large pile, we need to use a proportion. We know that 15 marbles weigh 43.35 g, so we can set up the following proportion:
15 marbles / 43.35 g = x marbles / 592.45 g
To solve for x, we can cross-multiply and simplify:
15 marbles x 592.45 g = 43.35 g x x marbles
8886.75 g = 43.35 g x x marbles
x marbles = 8886.75 g / 43.35 g ≈ 205
Therefore, there are approximately 205 marbles in the large pile that weighs 592.45 g. It's worth noting that this answer is an approximation since we rounded the final result to the nearest whole number. Also, the actual weight of each marble may vary slightly, which could affect the exact number of marbles in the pile.
To know more about large pile refer to-
https://brainly.com/question/31463665
#SPJ11
During a period of discharge of a lead-acid battery, 378 grams of Pb from the anode is converted into PbSO (s). What mass of PbO,(s) in grams is reduced at the cathode during this same period?
During the discharge of a lead-acid battery, the oxidation reaction occurs at the anode where lead (Pb) is converted into lead sulfate (PbSO4) and electrons are released:
Pb(s) → PbSO4(s) + 2e-
Meanwhile, reduction occurs at the cathode where lead dioxide (PbO2) is reduced to lead sulfate (PbSO4) by gaining those electrons released at the anode:
PbO2(s) + 4H+(aq) + 2e- → PbSO4(s) + 2H2O(l)
The balanced chemical equation shows that for every two electrons transferred at the anode, one molecule of PbSO4 is formed. Therefore, the 378 grams of Pb from the anode would produce 378/207 = 1.82 moles of PbSO4.
Since the reaction at the cathode involves the reduction of PbO2 to PbSO4, the same number of moles of PbSO4 should be formed at the cathode. The molar mass of PbO2 is 239.2 g/mol, so the mass of PbO2 that is reduced at the cathode would be:
1.82 moles x 239.2 g/mol = 435.8 g
Therefore, during the same period of discharge, 435.8 grams of PbO2 would be reduced at the cathode.
For more questions on: oxidation
https://brainly.com/question/4222605
#SPJ11
A solution consisting of 11. 4 g NH4Cl in 150 ml of water is titrated with 0. 20 M KOH.
a. How many milliliters of KOH are required to reach the equivalence point?
b. Calculate {Cl-], [K+], and [NH3] at the equivalence point. Assume volumes are additive
The balanced chemical equation for the reaction between NH4Cl and KOH is:
NH4Cl + KOH → NH3 + KCl + H2O
a. To calculate the volume of 0.20 M KOH required to reach the equivalence point, we need to know the amount of NH4Cl in the solution. The amount of NH4Cl can be calculated as follows:
amount of NH4Cl = (mass of NH4Cl) / (molar mass of NH4Cl)
= 11.4 g / 53.49 g/mol
= 0.2131 mol
At the equivalence point, all of the NH4Cl has reacted with the KOH, and the number of moles of KOH added is equal to the number of moles of NH4Cl in the solution. Therefore, we can calculate the volume of KOH required as follows:
moles of KOH = moles of NH4Cl
= 0.2131 mol
volume of KOH = moles of KOH / Molarity of KOH
= 0.2131 mol / 0.20 mol/L
= 1.065 L = 1065 mL
Therefore, 1065 mL of 0.20 M KOH are required to reach the equivalence point.
b. At the equivalence point, all of the NH4Cl has been converted to NH3, K+ and Cl-. Therefore, the concentration of K+ and Cl- will be determined by the amount of KOH added, while the concentration of NH3 will be determined by the amount of NH4Cl initially present. Assuming volumes are additive, the volume of the solution at the equivalence point is 150 mL + 1065 mL = 1215 mL.
The number of moles of K+ and Cl- at the equivalence point can be calculated as follows:
moles of K+ = concentration of KOH × volume of KOH added
= 0.20 mol/L × 1.065 L
= 0.213 mol
moles of Cl- = moles of NH4Cl initially present
= 0.2131 mol
The concentration of K+ and Cl- at the equivalence point can be calculated by dividing the number of moles by the volume of the solution:
[K+] = moles of K+ / volume of solution
= 0.213 mol / 1.215 L
= 0.175 M
[Cl-] = moles of Cl- / volume of solution
= 0.2131 mol / 1.215 L
= 0.175 M
The concentration of NH3 at the equivalence point can be calculated from the amount of NH4Cl initially present, since all of the NH4Cl has been converted to NH3:
moles of NH3 = moles of NH4Cl initially present
= 0.2131 mol
The concentration of NH3 can be calculated by dividing the number of moles by the volume of the solution:
[NH3] = moles of NH3 / volume of solution
= 0.2131 mol / 1.215 L
= 0.175 M
Therefore, at the equivalence point, [Cl-] = [K+] = 0.175 M, and [NH3] = 0.175 M.
To know more about chemical refer here
https://brainly.com/question/29237397#
#SPJ11
Help pls! Assuming non-ideal behavior, a 2. 0 mol sample of CO₂ in a 7. 30 L container at 200. 0 K has a pressure of 4. 50 atm. If a = 3. 59 L²･atm/mol² and b = 0. 0427 L/mol for CO₂, according to the van der Waals equation what is the difference in pressure (in atm) between ideal and nonideal conditions for CO₂?
The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.
To find the difference in pressure between ideal and non-ideal conditions for CO₂ using the van der Waals equation, follow these steps:
1. First, recall the van der Waals equation: (P + a(n/V)²)(V - nb) = nRT, where P is pressure, n is the number of moles, V is volume, T is temperature, a and b are van der Waals constants, and R is the ideal gas constant (0.0821 L･atm/mol･K).
2. Given values: n = 2.0 mol, V = 7.30 L, T = 200.0 K, a = 3.59 L²･atm/mol², b = 0.0427 L/mol, and P_vdW = 4.50 atm (non-ideal pressure).
3. Calculate the ideal pressure (P_ideal) using the ideal gas law, PV = nRT:
P_ideal = nRT/V = (2.0 mol)(0.0821 L･atm/mol･K)(200.0 K) / 7.30 L = 4.49 atm.
4. Find the difference in pressure between ideal and non-ideal conditions:
ΔP = P_vdW - P_ideal = 4.50 atm - 4.49 atm = 0.01 atm.
The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.
To know more about van der Waals equation :
https://brainly.com/question/31585867
#SPJ11
A 0. 0600 M solution of an organic acid has an [H+] of 1. 75×10-3 M
The pH value of the mentioned solution is calculate out being 2.76. The percent ionization of the acid is calculate being nearly 3.8%. And the Ka value of the acid is found out to be 1.75×10⁻³.
In the way to get pH of the solution, we ar needed to utilize the formula:
pH = -log[H⁺]
here, [H⁺] is defined as the concentration of the hydrogen ion in moles per liter (M).
As per given [H⁺] = 1.75×10⁻³ M, we have:
pH = -log(1.75×10⁻³) = 2.76
Therefore, the pH of the mentioned solution is found out being 2.76.
In order to calculate the percent ionization of the acid, we can utilize the formula: % ionization = [H⁺] / [HA] × 100%
( [HA] is the initial concentration of the acid in moles per liter (M))
The [HA] can be calculated using the information that the solution is 0.0460 M, so:
[HA] = 0.0460 M
% ionization = [H⁺] / [HA] × 100% = (1.75×10⁻³ / 0.0460) × 100% ≈ 3.8%
Therefore, the percent ionization of the acid is calculate being nearly 3.8%.
To get the Ka value of the acid, we can use the expression:
Ka = [H⁺]² / [A⁻]
Here, [A⁻] is the concentration of the conjugate base of the acid in moles every liter (M).
The presented acid is a weak acid, so it dissociates according to the equation:
HA ⇌ H⁺ + A⁻
From this equation above , we can find and get that the initial concentration of the conjugate base [A⁻] calculated being almost equal to the concentration of the hydrogen ion [H⁺] because the acid is only slightly ionized. Therefore, we have: [A⁻] = [H⁺] = 1.75×10⁻³ M
putting it in this in order to find Ka, we will get:
Ka = [H⁺]² / [A⁻] = (1.75×10⁻³)² / (1.75×10⁻³) = 1.75×10⁻³. Hence, the Ka value of the acid is calculated being 1.75×10⁻³.
Learn more about Ionization :
https://brainly.com/question/1602374
The complete question is :
A 0.0460 M solution of an organic acid has an [H⁺] of 1.75×10⁻³ M . Using the values above, calculate the pH of the solution. What is the percent ionization of the acid? Calculate the Ka value of the acid.
Assuming pressure is constant. There are 12. 75 mL of chemical product associated with a temperature reading of 68 degrees Celsius. What will the final temperature be if the volume increased to 5. 25 mL
The final temperature will be approximately -55.6 degrees Celsius when the volume is reduced to 5.25 mL.
According to Charles' Law, when pressure is constant, the volume of a gas is directly proportional to its temperature (in Kelvin). The formula for Charles' Law is V1/T1 = V2/T2.
First, convert the initial temperature from Celsius to Kelvin (68 + 273.15 = 341.15 K). Then, plug in the values: (12.75 mL / 341.15 K) = (5.25 mL / T2).
To solve for T2, multiply both sides by T2 and divide by 5.25 mL: T2 = (341.15 K * 5.25 mL) / 12.75 mL ≈ 139.6 K. Finally, convert back to Celsius: 139.6 K - 273.15 ≈ -55.6 degrees Celsius.
To know more about Charles' Law click on below link:
https://brainly.com/question/16927784#
#SPJ11
The gas inside of neon signs is kept at extremely low pressures (27. 0 torr). While the sign is on the 1. 075 x 10-4 moles of gas reaches a temperature of 42. 6 °C. What volume of gas is in the sign?
The volume of gas in the neon sign is 2.0 mL.
Neon signs are a popular form of advertising, characterized by bright and colorful lights that make them easily noticeable. These signs are made up of glass tubes that contain a small amount of neon gas at extremely low pressures, typically around 27.0 torr.
When an electrical current is applied to the gas, it emits a bright red-orange light, giving the sign its characteristic glow.
In order to determine the volume of gas in a neon sign, we need to use the ideal gas law equation, PV=nRT. We are given the pressure, temperature, and number of moles of gas in the sign, but we need to find the volume. Rearranging the equation to solve for V, we get V=nRT/P.
Plugging in the given values, we get:
V = (1.075 x 10^-4 moles)(0.0821 L•atm/mol•K)(315.75 K)/(27.0 torr x 1 atm/760 torr)
V = 0.002 L or 2.0 mL
Therefore, the volume of gas in the neon sign is 2.0 mL. It's important to note that the volume of gas in the sign can vary depending on the size and shape of the sign, as well as the pressure and temperature of the gas inside.
To know more about neon sign, visit:
https://brainly.com/question/30179681#
#SPJ11
how many periods are there in a periodic table of elements
There are 7 periods in the periodic table of elements.
The periodic table is a tabular arrangement of the chemical elements, organized according to their atomic number, electron configuration, and recurring chemical properties. Elements are presented in increasing atomic number, displayed in rows called periods.
Each period corresponds to the filling of a new electron shell, with the number of the period indicating the principal quantum number (n) of the electron shell being filled.
Period 1 contains only two elements, hydrogen and helium, as it corresponds to the filling of the 1s subshell. Period 2 and 3 each contain eight elements, corresponding to the filling of 2s, 2p, 3s, and 3p subshells. Period 4 and 5 contain 18 elements each, filling the 4s, 3d, 4p, 5s, 4d, and 5p subshells.
Finally, periods 6 and 7 contain 32 elements each, filling the 6s, 4f, 5d, 6p, 7s, 5f, 6d, and 7p subshells.
In summary, the periodic table consists of 7 periods, with each period representing the filling of a new electron shell. The number of elements in each period increases as you move down the periodic table due to the additional subshells that are filled.
To know more about periodic table, visit:
https://brainly.com/question/31672126#
#SPJ11
How is entropy related to the spontaneity of a reaction?
O A. AS<0 contributes to spontaneity.
O B. AS does not affect spontaneity.
C. AS = 0 contributes to spontaneity.
D. AS> O contributes to spontaneity.
ΔS> O contributes to spontaneity. This is the relationship between entropy and spontaneity. Therefore, the correct option is option D.
Entropy is a measureable physical characteristic and a scientific notion that is frequently connected to a condition of disorder, unpredictability, or uncertainty. From classical thermodynamics, where it was originally recognised, through the microscopic description of nature in statistical physics, to the fundamentals of information theory, the phrase and concept are employed in a variety of disciplines. It has numerous applications in physics and chemistry, biological systems and how they relate to life, cosmology, economics, sociology, weather science, and information systems, especially the exchange of information. ΔS> O contributes to spontaneity.
Therefore, the correct option is option D.
To know more about entropy, here:
https://brainly.com/question/20166134
#SPJ12
how does the “Law of Conservation of Matter” explain how to write nuclear equations?
How many grams of iron are produced from 300. moles of carbon monoxide reacting with 15,000. grams of ferric oxide? 3CO + Fe2O3 →2Fe + 3C02
11,169 grams of iron is produced from 300 moles of carbon monoxide reacting with 15,000 grams of ferric oxide.
The balanced chemical equation shows that 3 moles of CO react with 1 mole of [tex]Fe_2O_3[/tex] to produce 2 moles of Fe. Therefore, we can calculate the number of moles of Fe produced from 300 moles of CO reacting with [tex]Fe_2O_3[/tex] as follows:
1 mole [tex]Fe_2O_3[/tex] produces 2 moles Fe
300 moles CO produces (2/3) x 300 = 200 moles Fe (by stoichiometry)
Next, we can use the molar mass of Fe to convert moles to grams:
1 mole Fe = 55.845 g Fe
200 moles Fe = 200 x 55.845 = 11,169 g Fe
To know more about carbon monoxide, here
brainly.com/question/22530423
#SPJ1
A 0.205g sample of caco3 is added to a flask with 7.50ml of 2.00 m hcl.
caco3(aq)+2hcl(aq)-cacl2(aq) + h2o(l) + co2
enough water is added to make a 125.0ml solution.a 10.00ml aliquot of this solution is taken and titred with 0.058 naoh
naoh (aq) + hcl - h2o + nacl
how many ml of naoh are used?
The volume of [tex]NaOH[/tex] used to titrate the[tex]HCl[/tex] is 5.80 mL
First, we need to find the number of moles of [tex]HCl[/tex] that reacted with the [tex]CaCO3[/tex].
2 mol [tex]HCl[/tex] react with 1 mol [tex]CaCO3[/tex]
Moles of [tex]HCl[/tex] = (7.50 mL) x (2.00 mol/L) = 0.015 mol [tex]HCl[/tex]
From the balanced equation, we see that 1 mol of [tex]CaCO3[/tex] reacts with 2 mol of [tex]HCl[/tex]. Therefore, the number of moles of [tex]CaCO3[/tex] in the original 0.205 g sample is:
Moles of[tex]CaCO3[/tex] = 0.205 g / 100.09 g/mol = 0.002049 mol [tex]CaCO3[/tex]
Since 1 mol of [tex]CaCO3[/tex] produces 1 mol of [tex]CO2[/tex], we have:
Moles of[tex]CO2[/tex]produced = 0.002049 mol [tex]CaCO3[/tex]
Now we need to calculate the concentration of [tex]CO2[/tex] in the final 125.0 mL solution.
Concentration of [tex]CO2[/tex] = Moles of [tex]CO2[/tex] produced / Volume of solution
Concentration of [tex]CO2[/tex] = 0.002049 mol / 0.125 L = 0.0164 mol/L
Finally, we can use the balanced equation for the titration reaction to calculate the number of moles of [tex]NaOH[/tex]used.
1 mol [tex]NaOH[/tex] reacts with 1 mol [tex]HCl[/tex]
Moles of [tex]NaOH[/tex] used = (0.058 L) x (0.1000 mol/L) = 0.0058 mol [tex]NaOH[/tex]
Since the volume of the aliquot is 10.00 mL or 0.0100 L, the concentration of [tex]HCl[/tex] is:
Concentration of [tex]HCl[/tex] = Moles of NaOH used / Volume of [tex]HCl[/tex]
Concentration of [tex]HCl[/tex] = 0.0058 mol / 0.0100 L = 0.580 M
Therefore, the volume of [tex]NaOH[/tex] used to titrate the [tex]HCl[/tex]is:
Volume of [tex]NaOH[/tex] = (0.580 M) x (0.0100 L) = 0.00580 L or 5.80 mL
So, the answer is 5.80 mL.
To know more about titration refer to-
https://brainly.com/question/31271061
#SPJ11
Chemistry Calculating moles.
The molarity of an aqueous solution containing 6.7 moles of potassium chloride in 0.63L is 10.6 M.
The quantity of solute molecules per litre of solution is known as a solution's molarity. In this issue, we are given the number of moles of solute (potassium chloride) and the volume of the solution. We can use this information to calculate the molarity of the solution using the following formula:
Volume of solution (V) / moles of solute (n) equals molarity (M).
Substituting the given values, we get:
Molarity (M) = 6.7 moles / 0.63 L = 10.6 M
Therefore, the molarity of the solution is 10.6 M, rounded to the tenths place.
It is important to note that molarity is a measure of concentration and is affected by both the amount of solute and the volume of the solution. Thus, it is important to accurately measure the volume of the solution to calculate the molarity correctly.
Furthermore, it is important to use caution when handling concentrated solutions such as this one, as they can be hazardous. Proper safety equipment and procedures should be followed when working with such solutions.
To learn more about moles here
brainly.com/question/26416088
#SPJ1
What is the energy of a photon that emits a light of frequency 6. 42 x 1014 Hz?
A. 3. 10 x 10-19 J
B. 4. 25 x 10-19 J
C. 9. 69 x 10-19 J
D. 4. 67 x 10-19 J
The energy of a photon that emits a light of frequency 6. 42 x 1014 Hz is 4.25 x 10^-19 J.
The energy of a photon can be calculated using the equation:
E=hf,
where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J.s), and f is the frequency of the light emitted by the photon.
Plugging in the given frequency of 6.42 x 10^14 Hz into the equation, we get
E=(6.626 x 10^-34 J.s)(6.42 x 10^14 Hz) = 4.25 x 10^-19 J.
Therefore, the correct answer is B i.e, 4.25 x 10^-19 J.
It should be emphasized that a photon's energy is directly linked to its frequency and inversely related to its wavelength. Therefore, light with higher frequency, such as blue light, contains more energy than light with lower frequency, such as red light.
Know more about Energy here:
https://brainly.com/question/1932868
#SPJ11
To what pressure must a gas be compressed in order to get into a 3. 00L the entire weight of a gas that occupies 350. 0L at standard pressure?
To answer this question, we need to use the ideal gas law, which is PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. We also need to use the concept of molar volume, which is the volume occupied by one mole of a gas at a specific temperature and pressure.
First, we need to find the number of moles of gas that occupies 350.0L at standard pressure (1 atm) and temperature (273 K). This can be calculated using the formula n = PV/RT, where P = 1 atm, V = 350.0L, R = 0.08206 L atm/mol K, and T = 273 K. Substituting these values, we get n = (1 atm x 350.0L)/(0.08206 L atm/mol K x 273 K) = 14.15 mol.
Next, we need to find the molar volume of the gas at the pressure and volume we want it to occupy. Using the same formula, but with the new pressure (P') and volume (V') values, we get V' = nRT/P'. Since we want the gas to occupy 3.00L, we have V' = 3.00L. We also know that the number of moles (n) and temperature (T) are constant, so we can rearrange the formula to solve for the new pressure (P'). Thus, P' = nRT/V' = (14.15 mol x 0.08206 L atm/mol K x 273 K)/3.00L = 2,062.58 atm.
Therefore, the gas must be compressed to a pressure of 2,062.58 atm in order to occupy a volume of 3.00L, assuming constant temperature and number of moles. This is a very high pressure, and it highlights the importance of understanding the properties of gases and how they behave under different conditions.
To know more about ideal gas law refer here
https://brainly.com/question/13821925#
#SPJ11
Hematite and magnetite are important ore minerals of ________ found in ________. A. Zinc, hydrothermal deposits b. Iron, banded iron formation (BIF) c. Copper, secondary enrichment deposits d. Aluminum, placer deposits
Hematite and magnetite are important ore minerals of iron found in banded iron formations (BIF), option B is correct.
Iron is one of the most abundant elements in the Earth's crust and is an essential component of many industrial and technological applications. Hematite (Fe₂O₃) and magnetite (Fe₃O₄) are two of the most important iron ore minerals, both of which are found in banded iron formations (BIFs).
BIFs are sedimentary rocks that were formed billions of years ago and consist of alternating layers of iron oxides (hematite or magnetite) and silica-rich chert. These formations were formed when the Earth's oceans contained high levels of dissolved iron, which reacted with oxygen produced by photosynthetic organisms to form iron oxide minerals, option B is correct.
To learn more about Hematite follow the link:
brainly.com/question/11375983
#SPJ4
The complete question is:
Hematite and magnetite are important ore minerals of ________ found in ________.
A. Zinc, hydrothermal deposits
B. Iron, banded iron formation (BIF)
C. Copper, secondary enrichment deposits
D. Aluminum, placer deposits
A 58. 3g sample of NH3 is reacted with 126g O2, according to this reaction what is the limiting reagent? 4NH3 + 7O2 --> 4NO + 6H2O
The ratio of NH₃ to O₂ is less than 4:7, it means that NH₃ is the limiting reagent. Therefore, NH₃ will be completely consumed before O₂ and the amount of product formed will be determined by the amount of NH₃ available.
To determine the limiting reagent, we need to compare the amount of each reactant with their respective stoichiometric coefficients in the balanced chemical equation.
First, we convert the given masses of NH₃ and O₂ to moles using their molar masses:
58.3 g NH₃ × (1 mol NH₃ ÷ 17.03 g NH₃) = 3.42 mol NH₃
126 g O₂ × (1 mol O₂ ÷ 32 g O₂) = 3.94 mol O₂
Next, we compare the number of moles of NH₃ and O₂ to the stoichiometric coefficients in the balanced equation:
NH₃ : O₂ ratio = 4:7
To learn more about reagent follow the link:
brainly.com/question/26905271
#SPJ4
<
Based on the texts, both authors would most likely agree with which
statement?
Choose 1 answer:
A
B
Sculpting representations of historical figures was a short-lived
trend.
Lewis's works are varied in the subjects they depict.
The Death of Cleopatra is Lewis's most famous piece.
Lewis's portrait busts have overshadowed her other work.
Based on the texts, both authors would most likely agree that Lewis's works are varied in the subjects they depict.
Option B is correct.
What are Lewis's works?C. S. Lewis FBA has some notable works such as The Chronicles of Narnia, Mere Christianity The Allegory of Love, The Screwtape Letters, The Abolition of Man, The Space Trilogy Till We Have Faces Surprised by Joy: The Shape of My Early Life.
This statement indicates that Edmonia Lewis created works in a range of subjects, which is supported by her sculpting of both historical and contemporary figures, as well as mythological and biblical scenes.
Learn more about contemporary figures at: https://brainly.com/question/2633604
#SPJ1
Help what’s the answer?
Answer:
in chemical reactions moles correspond to the number of molecules or atoms that go into reaction. It means that number that is in front of molecule or atom for example in this reaction you have one oxygen it means one mole of oxygen. 4 molecules of acid correspond to 4 moles of HCl. So the final answer would be:
4 moles of HCl
2 moles of H2O
2 moles of Cl2
There are no attractive or repulsive forces between gas molecules. How does that affect the motion of gas particles?
The absence of attractive or repulsive forces between gas molecules means that they are free to move independently and randomly. This results in the motion of gas particles being characterized by constant collisions and changes in direction and speed. Without any forces to constrain their movement, gas particles will continue to move until they collide with other particles or the walls of their container. This is what causes gases to fill up any container they are in, as their independent motion allows them to spread out evenly throughout the available space.
What is attractive force?
An attractive force is a force that pulls or draws two or more objects or particles towards each other. It is the opposite of a repulsive force, which pushes objects or particles away from each other.
Attractive forces can be observed in a variety of contexts, including gravity, electromagnetism, and intermolecular forces in chemistry. For example, the force of gravity between two objects is an attractive force that pulls them together, while the electromagnetic force between opposite charges is also an attractive force.
What is repulsive force?
A repulsive force is a force that pushes two or more objects or particles away from each other. It is the opposite of an attractive force, which pulls objects or particles towards each other.
Repulsive forces can be observed in a variety of contexts, including electromagnetism and intermolecular forces in chemistry. For example, the force between two like charges is repulsive, while the force between two like magnetic poles is also repulsive.
To know more about Gas molecules:
https://brainly.com/question/30597086
#SPJ11
In the bohr model, what happens when an electron makes a transition between orbits?.
In the Bohr model of the atom, electrons can exist only in certain discrete energy levels, or orbits, around the nucleus. When an electron transitions between two orbits with different energy levels, it absorbs or emits a photon of electromagnetic radiation with a specific energy corresponding to the difference in energy between the two levels.
If an electron absorbs a photon, it gains energy and moves to a higher energy level, or outer orbit. This is known as an "excited state". However, this is unstable, and the electron will eventually return to its original energy level, or ground state, by emitting a photon with the same energy as the absorbed photon.
On the other hand, if an electron emits a photon, it loses energy and moves to a lower energy level, or inner orbit. This is known as a "relaxed state". In this case, the emitted photon has an energy equal to the difference in energy between the two levels.
Overall, when an electron makes a transition between orbits, it either absorbs or emits a photon of electromagnetic radiation, with the energy of the photon corresponding to the difference in energy between the two levels.
To know more about Bohr model refer to-
https://brainly.com/question/3964366
#SPJ11
A solution is 5 mM in each of the following ions:
number ion Ksp of M(OH)2
1 Mg2+ 1. 8e-11
2 Cd2+ 2. 5e-14
3 Co2+ 1. 6e-15
4 Zn2+ 4. 4e-17
5 Cu2+ 2. 2e-20
Indicate which of the metal ions would precipitate (or start to precipitate) at each of the following pH values. Indicate your answer with the number of the ion. Use 0 to indicate no precipitate. If more than one precipitate is expected, list the numbers in increasing order and separate them with commas. For example, 3,4,5 is ok but 5,4,3 is not.
pH = 6. 00: _______________? (1,2,3,4,5 list all that apply?)
pH = 8. 00: __________? (1,2,3,4,5 list all that apply?)
What is the pH to the nearest 0. 1 pH unit at which Cu(OH)2 begins to precipitate? pH = ______?
pH = 6.00: 0, 1, 2, 3, 4, 5 will not precipitate.
pH = 8.00: 0, 1, 2, 3, 4, 5 will not precipitate.
To determine the pH at which Cu(OH)₂ begins to precipitate, we need to calculate the hydroxide ion concentration at which the product of [Cu²⁺] and [OH⁻]² reaches the Ksp value of Cu(OH)₂ (2.2e⁻²⁰). At this point, Cu(OH)₂ will begin to precipitate. Thus, we have:
Ksp = [Cu²⁺][OH⁻]²2.2e⁻²⁰ = (5e⁻³ M)[OH⁻]²[OH⁻]² = 4.4e⁻¹⁷[OH⁻] = 2.1e⁻⁸ MpOH = -log[OH⁻] = -log(2.1e⁻⁸) = 7.68pH = 14 - pOH = 6.32 (rounded to the nearest 0.1 pH unit)Therefore, Cu(OH)₂ begins to precipitate at a pH of 6.3.
To learn more about precipitate, here
https://brainly.com/question/31046678
#SPJ4
Question 3 & what is the hydronium concentration for a solution with a poh = 12.04 o -1.08 m o.98 m 0.011 m p o 1.96 m question 4 a solution is made by combining 2.5 moles of hf (ka 3,5 x 19 and 3.5 mol click save and submit to save and submit chick save asters to small ans
For question 3, we can use the relationship pH + pOH = 14 to solve for the pH, which is 1.96.
Then, we can use the equation Kw = [[H₃O⁺][OH⁻] = 1.0 x 10⁻¹⁴ to solve for the hydronium concentration, which is 5.01 x 10⁻¹³ M.
For question 4, we can use the equation for the acid dissociation constant (Ka) to solve for the concentration of the conjugate base, F-. Ka = [H₃O⁺][F⁻]/[HF].
We know the concentration of HF is 2.5 moles, so we can convert this to molarity using the volume of the solution. Then, we can plug in the values we have and solve for [F-], which is 2.77 M. This solution will be acidic, as the Ka value is less than 1.
To know more about acid dissociation constant click on below link:
https://brainly.com/question/4363472#
#SPJ11
Which of the following is equal to 2?
O A. 6+4 ÷ (2+1) × 3
O B. (6+4 ÷ 2) - 1×3
O
C. 6+ (4÷ 2) + 1 × 3
O D. (6 + 4)÷2-1×3
O D. (6 + 4)÷2-1×3
the cacuclator gives u the answer to this
A 30g piece of metal absorbs 1,200 joules of heat energy, and its
temperature changes from 25°C to 175°C. Calculate the specific capacity of
the metal. What is the likely metal?
Answer:
Niobium (Columbium)
Explanation:
Specific heat capacity has the units J/(kg °C). To find the heat capacity, all we need to do is organize the values so the units match up.
1200 J / (0.03 kg * 150°C) = 266.67 or 267 J/(kg °C)
The closest metal to a 267 heat capacity is Niobium I believe.
K+ __ cl2 --> __ kci
if you are given 47.5 l of chlorine gas, determine the number of moles of potassium chloride produced.
When given 47.5 L of chlorine gas, approximately 4.1 moles of potassium chloride will be produced.
To determine the number of moles of potassium chloride (KCl) produced when given 47.5 L of chlorine gas (Cl₂), follow these steps:
Step 1: Write the balanced chemical equation.
The given equation is K + Cl₂ → KCl. We need to balance it, which will give us:
2K + Cl₂ → 2KCl
Step 2: Convert the volume of chlorine gas to moles using the ideal gas law.
The ideal gas law is PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is temperature in Kelvin. We need to make some assumptions since we are only given the volume (47.5 L). Assuming standard temperature and pressure (STP) conditions, the temperature is 273.15 K, and the pressure is 1 atm.
Rearrange the equation to solve for moles (n):
n = PV/RT
Plug in the values:
n = (1 atm)(47.5 L) / (0.0821 L·atm/mol·K)(273.15 K)
n ≈ 2.05 moles of Cl₂
Step 3: Use the stoichiometry of the balanced equation to find the moles of KCl produced.
From the balanced equation, we see that 1 mole of Cl₂ produces 2 moles of KCl.
Now, use the ratio to find the moles of KCl:
2.05 moles Cl₂ × (2 moles KCl / 1 mole Cl₂) = 4.1 moles of KCl
So, when given 47.5 L of chlorine gas, approximately 4.1 moles of potassium chloride will be produced.
To know more about ideal gas law :
https://brainly.com/question/30458409
#SPJ11
Find the balance and net ionic equation for the statements below. Answer what you can.
1. Calcium + bromine —>
2. Aqueous nitric acid, HNO3, is mixed with aqueous barium chloride
3. Heptane, C7H16, reacts with oxygen
4. Chlorine gas reacts is bubbles through aqueous potassium iodide (write both the balanced and net ionic equation)
5. Zn (s) + Ca (NO3)2 (aq) —>
6. Aqueous sodium phosphate mixes with aqueous magnesium nitrate (write both the balanced and net ionic equation)
7. Aluminum metal is placed in aqueous zinc chloride
8. Iron (III) oxide breaks down
9. Li(OH) (ag) + HCI (aq) —>
(write both the balanced and net ionic equation)
10A. Solid sodium in water. Hint: Think water, H2O, as H(OH)
10B. What would happen if you bring a burning splint to the previous reaction?
A- The burning splint continues to burn.
B - The burning splint would make a "pop" sound.
C - The burning splint would go out.
Ca +Br2 ---> CaBr2
2HNO3 + BaCl2 --->Ba(NO3)2 +2HCl
C7H16 + 11O2 → 7CO2 + 8H2O
Cl2 + 2KI --->2KCl + I2
No reaction
2Na3PO4 + 3Mg(NO3)2 → Mg3(PO4)2 + 6NaNO3
2Al + 3ZnCl2 → 3Zn + 2AlCl3
Li(OH) (ag) + HCI (aq) —>LiCl + H2O
2Na + 2H2O → 2NaOH + H2
The burning splint would make a "pop" sound.
What is the balanced equation?A balanced equation is a chemical equation that has an equal number of atoms of each element on both the reactant and product sides.
In other words, a balanced equation follows the law of conservation of mass, which states that the total mass of the reactants must equal the total mass of the products in a chemical reaction.
Learn more about balanced equation:https://brainly.com/question/7181548
#SPJ1
How many liters of CO2 are produced when 32. 6 liters
of propane gas, C3H3 reacts with excess oxygen at STP?
C3Hg + 502 + 4H20 + 3C02
Please help!!!
3.75 moles CO₂ × 22.4 L/mole = 84 liters of CO₂ are produced when 32.6 liters of propane gas reacts with excess oxygen at STP.
Based on the balanced equation provided, 1 mole of propane gas (C₃H₈) reacts with 5 moles of oxygen gas (O₂) to produce 3 moles of carbon dioxide gas (CO₂) at STP (Standard Temperature and Pressure, which is 0°C and 1 atm pressure).
To determine the number of moles of propane gas (C₃H₈) in 32.6 liters, we need to use the Ideal Gas Law:
PV = nRT
where P is the pressure (1 atm), V is the volume (32.6 L), n is the number of moles, R is the ideal gas constant (0.0821 L•atm/mol•K), and T is the temperature in Kelvin (273 K at STP).
Rearranging the equation to solve for n, we get:
n = PV/RT = (1 atm)(32.6 L)/(0.0821 L•atm/mol•K)(273 K) = 1.25 moles of C₃H₈
Since 1 mole of C₃H₈ produces 3 moles of CO₂, we can use a mole ratio to determine the number of moles of CO₂ produced:
1.25 moles C₃H₈ × 3 moles CO₂/1 mole C₃H₈ = 3.75 moles CO₂
Finally, we can convert moles to volume at STP using the molar volume of a gas:
1 mole of gas = 22.4 L at STP
So, 3.75 moles CO₂ × 22.4 L/mole = 84 liters of CO₂ are produced when 32.6 liters of propane gas reacts with excess oxygen at STP.
To know more about Ideal Gas Law :
https://brainly.com/question/13207402
#SPJ11
