Regardless of tank size, what is the minimum number of settlement point measurements?
A) Four
B) Eight
C) Twelve
D) Based on the formula N=D/10

Answer:

h1 = 1.4545h1 - 0.2273

h1 = 0.2727 m

Explanation:

To solve this problem, we can use the concept of continuity equation, which states that the flow rate of water is constant along the channel. The flow rate can be calculated as the product of the cross-sectional area of flow and the velocity of flow.

Let's first calculate the cross-sectional area of flow in the trapezoidal channel. The side slopes of 1.5h:1v mean that the ratio of the height to the top width of the trapezoid is 1.5:1. Let h be the depth of flow, and b be the bottom width of the trapezoid. Then we have:

h/b = 1.5/1

h = 1.5b

The area of the trapezoid can be calculated as:

A = (1/2)(b1 + b2)h

= (1/2)(4.3 + 4.3 + 1.5h)(h)

= (1/2)(8.6 + 1.5h)(h)

= 4.3h + 0.75h^2

Substituting the given values, we get:

A = 4.3(2.2) + 0.75(2.2)^2

= 11.99 m^2

The flow rate can be calculated as:

Q = Av

= 11.990.17

= 2.0383 m^3/s

Now, let's consider the bridge placed in the middle of the channel. The cross-sectional area of flow upstream and downstream of the bridge should be equal to maintain continuity of flow. Let's assume that the depth of flow adjacent to the pier is h1, and the width of the pier is w. Then the cross-sectional area of flow upstream of the pier can be calculated as:

A1 = (1/2)(4.3 + 1.5h1)(h1)

= 2.15h1 + 0.75h1^2

The cross-sectional area of flow downstream of the pier can be calculated as:

A2 = (1/2)(4.3 + 1.5h2)(h2)

= 2.15h2 + 0.75h2^2

Since the flow rate is constant, we have:

A1v1 = A2v2

The velocity of flow can be assumed to be the same upstream and downstream of the pier, since the water level is expected to be constant. Therefore, we have:

v1 = v2 = 0.17 m/s

Substituting the given values and solving for h2, we get:

h2 = (4.3 + 1.5h1 - w)(h1)/(4.3 + 1.5h1 + w)

Now, we can use this equation to calculate the depth of flow adjacent to the pier for different values of w. For example, if we assume w = 0.5 m, we get:

h2 = (4.3 + 1.5h1 - 0.5)(h1)/(4.3 + 1.5h1 + 0.5)

= 1.4545h1 - 0.2273

To find the maximum value of w that will not cause a rise in the water surface upstream of the pier, we need to find the value of w that makes h2 = h1. This gives:

Gradation in soil refers to the distribution and range of particle sizes within a sample of soil. This can be determined through a process called sieve analysis, which involves separating soil particles into different size fractions using a series of sieves with different mesh sizes. The resulting data can be used to classify soil into different categories based on its particle size distribution.

For such more question on gradation

https://brainly.com/question/28197459

#SPJ11

The correct answer is A) 90 degrees.

Torque (τ) on a current-carrying loop in a magnetic field is given by the formula τ = μ x B, where μ is the magnetic moment, B is the magnetic field vector, and x represents the cross product. The magnitude of the torque is given by τ = μBsinθ, where θ is the angle between the magnetic moment and the magnetic field vector.

In order to maximize the torque, sinθ should be at its maximum value, which is 1. This occurs when the angle θ is 90°. Therefore, the maximum torque on a current-carrying loop occurs when the angle between the loop's magnetic moment and the magnetic field vector is 90°.

Learn more about Torque: https://brainly.com/question/17512177

#SPJ11

The statement "The three principal ways in which a load may be applied to a material are torsion, compression, and shear" is true.

Here's an explanation of each term:
1. Torsion: A twisting force that is applied to a material, causing it to rotate around its axis.
2. Compression: A force that pushes or squeezes a material together, reducing its size in the direction of the applied force.
3. Shear: A force that causes two parts of a material to slide past each other, resulting in deformation.

These are the three main ways a load can be applied to a material, causing different types of stress and deformation.

To know more about load

https://brainly.com/question/20039214?

#SPJ11

A word processing package is a software program that allows users to create, edit, and format text documents. There are several features of a word processing package that could be useful for an office environment.


1. Document Formatting: Word processing packages offer a range of formatting tools that allow users to create professional and organized documents. This includes adjusting fonts, text sizes, and line spacing, as well as inserting headers, footers, and page numbers. Additionally, users can create tables, bulleted and numbered lists, and apply various styles to enhance the document's appearance. This feature is beneficial for the office as it enables employees to create consistent and visually appealing documents.

2. Collaboration and Reviewing: Modern word processing packages often provide collaboration features, allowing multiple users to work on the same document simultaneously. This promotes teamwork and efficiency, as colleagues can contribute, edit, and review documents in real-time. Furthermore, reviewing tools, such as Track Changes and Comments, enable users to provide feedback and make suggestions directly within the document. This streamlines the editing process and ensures clear communication among team members.

In summary, document formatting and collaboration/reviewing features in a word processing package are valuable for office environments, as they enable the creation of professional documents and promote efficient teamwork.

Learn more about document here: brainly.com/question/12401517

#SPJ11

Class E or J (Class B & R-1 new code) signaling devices operate for alerting all people about the fire.

Fire is the rapid oxidation of a material (the fuel) in the exothermic chemical process of combustion, releasing heat, light, and various reaction products.At a certain point in the combustion reaction, called the ignition point, flames are produced. The flame is the visible portion of the fire.

Signalling devices are used for the purpose of alerting all people about the fire.

Learn more about fire,here:

https://brainly.com/question/30412394

#SPJ4

An OROCA (Obstacle Clearance Altitude) is a minimum altitude that provides a buffer or safety margin above obstacles within a specified area. This buffer is designed to ensure that aircraft can safely fly over terrain and man-made obstacles, such as buildings or towers, without the risk of collision. The specific buffer provided by an OROCA will vary depending on the terrain and the obstacles in the area, with larger buffers typically required in mountainous regions. In general, an OROCA is designed to provide a safe and reliable minimum altitude for aircraft operating in both mountainous and nonmountainous areas.

To know more about buffer

https://brainly.com/question/22821585?

#SPJ11

If one of the fire brigade members contacts you to inform you that they accidentally set off the fire alarm on the fourth floor, it would be incorrect for you to:

Ignore the call or brush it off as unimportant. Panic or overreact, which could cause confusion and unnecessary alarm among occupants of the building.

This may include verifying the cause of the alarm, checking the status of the building, communicating with building management and the fire department, and documenting the incident for future reference.

Learn more about fire brigade, here

https://brainly.com/question/31586813

#SPJ4

The field that provides traffic marking for a QoS system at layer 3 is the Differentiated Services Code Point (DSCP) field. This field is used to classify and prioritize traffic based on its type and importance within the network system. By using DSCP values, network administrators can ensure that critical traffic receives preferential treatment and that the system can effectively manage and prioritize network traffic.

What is the QoS system?

QoS stands for Quality of Service, and it refers to a system or set of technologies that are used to manage and prioritize network traffic. QoS systems are designed to ensure that important data, such as voice or video streams, is delivered with the highest priority, while less critical data, such as file downloads or emails, receives a lower priority.

A QoS system typically involves setting up policies and rules that govern how different types of network traffic are handled. For example, a policy might be created that prioritizes video conferencing traffic over file downloads, so that the video stream is not interrupted by slower downloads.

QoS systems are commonly used in enterprise networks to ensure that business-critical applications have the necessary bandwidth and priority to operate effectively. They are also used by internet service providers (ISPs) to manage traffic on their networks and prevent congestion during peak usage times.

Overall, QoS systems are an important tool for ensuring reliable and efficient network performance, particularly in environments where network traffic is high or where certain types of data are especially important.

to know more about administrators :

https://brainly.com/question/29994801

#SPJ11

There is no single factor that a floor warden should ignore when selecting an evacuation stair. However, if we have to choose an option that is least important to consider, it would be option C - stair leads to roof.

While a stairway leading to the roof may be useful for rescue operations, it is not a critical factor in the selection of an evacuation stair. The location of the fire, the presence of smoke in the stairway, and the direction from the Fire Command Station are all crucial factors that a floor warden should consider when selecting an evacuation stair. The location of the fire and the presence of smoke will affect the safety of the evacuation route, while the direction from the Fire Command Station will help ensure that the evacuation is coordinated and efficient.

Therefore, the correct answer is option C.

Learn more about evacuation, here:

https://brainly.com/question/31539560

#SPJ4

One benefit of using CAD (Computer-Aided Design) applications is the ability to create precise and accurate designs. For example, an architect using CAD software can easily design a building with accurate measurements and dimensions, ensuring structural integrity and efficient use of materials.

The benefit of using CAD applications is that they allow for much greater accuracy and precision in designing and modeling products, buildings, and other structures. This can save a great deal of time and money in the design process, as well as helping to prevent errors and mistakes that could lead to costly rework or even safety hazards.

Know more about the Computer-Aided Design

https://brainly.com/question/30080718

#SPJ11

True, MegaPress is designed and intended to be used with Schedule 5-40 pipe. MegaPress is a press fitting system specifically designed for use with carbon steel pipes, such as Schedule 5-40 pipe, to create secure and reliable connections.

A press tool is used to compress fittings onto the pipe in a press fitting system, such as MegaPress, to provide a secure and dependable connection without the use of welding, threading, or soldering.

MegaPress fittings are specifically made for use with carbon steel pipes, which are frequently used in industrial and commercial applications. MegaPress is designed to be used with Schedule 5-40 pipe. These pipes are available in several schedules, or wall thicknesses.

MegaPress is not advised for use with other types of pipe, including those made of copper or stainless steel, even if these materials may work with MegaPress. This is so that connections made using MegaPress fittings, which are made to compress onto carbon steel pipes, will be secure and dependable, as opposed to connections made using other materials.

Learn more about the MegaPress :

https://brainly.com/question/31597386

#SPJ11

The threshold temperature that causes the illumination of the fire warning light refers to the specific temperature at which the fire warning system detects a potential fire hazard and activates the light as a visual alert.

This threshold temperature varies depending on the specific fire warning system in use and the location where it is installed. To determine the exact threshold temperature for your system, you would need to consult the manufacturer's guidelines or specifications for your particular device.

To knoe more about threshold temperature

https://brainly.com/question/28207509?

#SPJ11

A file timestamp might not show the time at which a crime was committed for several reasons:

1. A file timestamp typically shows the time of the file's creation, modification, or access, but not the exact time when a crime took place. The crime could have occurred earlier or later than the timestamp.

2. The timestamp on the file could have been altered or manipulated intentionally by the person committing the crime to hide evidence or create confusion about the timeline of events.

3. The device or system where the file is stored may have incorrect or unsynchronized time settings, leading to inaccurate timestamps.

4. There might be a delay between the crime being committed and the file being created or modified, meaning the timestamp would reflect the later time rather than the actual time of the crime.

In summary, a file timestamp might not show the time at which a crime was committed due to factors such as the nature of timestamps, intentional manipulation, system errors, or delays in file creation or modification.

To know more about timestamp

https://brainly.com/question/24238190?

#SPJ11

In a data labeling project, you could implement a range of information classifications, such as:

1. Public: Information that is accessible to everyone and has no restrictions.
2. Internal: Information intended for internal use within an organization, but not highly sensitive.
3. Confidential: Information that should only be accessed by authorized individuals, such as sensitive business or customer data.
4. Highly Confidential: Highly sensitive information that requires strict access control, such as trade secrets or personal data with legal implications.

To implement these classifications, you can follow these steps:

1. Identify the types of data and their sensitivity levels within your organization.
2. Create a classification scheme based on the identified range (Public, Internal, Confidential, Highly Confidential).
3. Develop and document clear policies and guidelines for handling and labeling data according to their classification.
4. Train employees on the classification scheme and policies.
5. Implement access controls, data encryption, and other security measures based on the classification of the data.
6. Regularly review and update the classification scheme and policies as needed.

To know more about data labeling project

https://brainly.com/question/30771006?

#SPJ11

Stair pressurization is an important safety feature in hi-rise buildings. The purpose of this system is to maintain a higher air pressure inside the stairwells than the air pressure outside. This creates a pressure barrier that prevents smoke and other harmful gases from entering the stairwells during a fire or other emergency. This allows occupants to safely evacuate the building using the stairs without being exposed to smoke or other dangerous fumes. Stair pressurization is a critical component of the building's fire safety system and is required by many building codes and regulations.

A stairwell pressurisation system is mechanically designed to establish air pressure variations between adjoining areas – such as an emergency escape route and a burning room. These air pressure differences (or variations) ensure that one side of a wall has positive and the other negative air pressure.

To know more about Stair pressurization

https://brainly.com/question/17084682?

#SPJ11

In the context of digital media, a client device communicates with a media server (such as a video server) to access and control the playback of the server's media files. This communication process typically involves three main steps:

1. Connection: The client device establishes a connection with the media server through a network protocol, like HTTP or RTSP.

2. Request: Once connected, the client sends requests to the media server to perform actions, such as starting, stopping, or pausing the playback of specific media files.

3. Response: The media server processes the client's request, performs the action, and sends a response back to the client, often with additional data like the current playback position or available media files.

This process enables seamless and efficient control of media playback across different devices and platforms.

Learn more about server: https://brainly.com/question/28320301

#SPJ11

Ductile fracture occurs when a material undergoes a significant amount of plastic deformation before rupturing. It is typically observed in materials that can absorb a large amount of energy before failure, such as metals, due to their ability to deform under stress without breaking. Here are some statements that correctly describe ductile fracture:

1. Ductile fracture is a slow and gradual process that occurs over an extended period of time, rather than a sudden and catastrophic failure.
2. The material experiences significant deformation and necking before it ruptures, which is a result of the material becoming thinner and elongated in the area of highest stress.
3. A ductile fracture is characterized by a cup and cone-shaped fracture surface, which indicates the presence of plastic deformation and tearing of the material.
4. The failure of the material occurs at a lower stress than for a brittle fracture due to the material's ability to deform plastically, which helps to redistribute the stress within the material.
5. Ductile fracture can be desirable in some applications, such as when a material is required to absorb energy without breaking, such as in automotive safety components.

Overall, ductile fracture is a result of the material's ability to deform plastically, which leads to a slow and gradual failure process that can be beneficial in some applications.

For such more question on Ductile

https://brainly.com/question/4701542

#SPJ11

The audible alarm sequence that is not correct is B. Alarm sounds on the fire floor only.

When a fire alarm is activated, it should sound throughout the entire building to alert occupants of a potential emergency. This helps to ensure that all individuals in the building are aware of the situation and can evacuate safely.

In low-rise non-fireproof buildings, it may be appropriate to sound the alarm on all floors. In high-rise buildings, the alarm may be designed to sound in zones or groups of floors to avoid causing unnecessary panic and confusion.

Learn more about audible alarm sequences, here:

https://brainly.com/question/5706110

#SPJ4

Grain boundaries are generally more chemically reactive than the grains themselves. This is because atoms near the grain boundaries tend to have less regular (and thus unsatisfied) .

bonds compared to the atoms within the grains. This unsatisfied bonding can result in higher reactivity and susceptibility to chemical reactions, making grain boundaries more chemically reactive than the grains. Grain boundaries are  chemically reactive than the grains themselves, due to atoms near the grain boundaries having less regular (thus unsatisfied) bonds.

learn more about  Grain boundaries    here:

https://brainly.com/question/31420865

#SPJ11

To submit messages for delivery by an SMTP server, a mail client should use Port 587 and Port 465. The security methods used include STARTTLS for Port 587 and SSL/TLS for Port 465. Here's a step-by-step explanation:

1. Choose Port 587 or Port 465 for your mail client to connect to the SMTP server.
2. For Port 587, use the STARTTLS security method, which upgrades the connection to an encrypted one if both the client and server support it.
3. For Port 465, use the SSL/TLS security method, which establishes an encrypted connection from the start.

Remember to configure your mail client with the appropriate port and security method to ensure secure message submission.

To know more about SMTP server

https://brainly.com/question/14617109?

#SPJ11

Erysipelas and impetigo are both skin infections caused by bacteria, but they have some differences in terms of the affected skin layers, symptoms, and the age groups they commonly occur in.

1. Affected skin layers: Erysipelas is an infection of the upper dermis (the second layer of the skin) and lymphatic vessels, while impetigo is a superficial infection affecting the outermost layer of the skin, the epidermis.

2.Symptoms: Erysipelas presents with symptoms such as a large, painful, and red rash with raised borders. It often affects the face or legs and may be accompanied by fever, chills, and swollen lymph nodes. Impetigo, on the other hand, causes small, fluid-filled blisters that rupture and develop a honey-colored crust, usually around the nose and mouth.

3. Age groups: Erysipelas is more common in adults, especially the elderly or those with a compromised immune system. Impetigo predominantly affects children, particularly those between 2 to 5 years old.

In summary, Erysipelas and impetigo differ in the skin layers they affect, their symptoms, and the age groups they commonly occur in.

To learn more about impetigo and its treatment , visit https://brainly.com/question/28428258

#SPJ11

The transmission method that uses fixed-length time slots and relies on a common clock source in the network is Time-Division Multiplexing (TDM). In TDM, multiple data streams are interleaved into fixed-length time slots,

and these time slots are transmitted sequentially over a shared communication channel. Network devices, such as switches or multiplexers, rely on a common clock source to ensure proper synchronization of the time slots, allowing for efficient and synchronized transmission of multiple data streams over the same channel. TDM is commonly used in various communication systems, including telecommunication networks and digital voice or data communication.

learn more about   transmission  here:

https://brainly.com/question/15884673

#SPJ11

The first practical visible-spectrum LED (light-emitting diode) was invented in 1962 by Nick Holonyak Jr., a researcher at General Electric.

Holonyak's LED emitted a visible red light and was made from gallium arsenide phosphide (GaAsP) materials. While Holonyak's invention was the first practical LED to emit visible light, other researchers had previously observed light emission from semiconductor materials in the infrared range in the 1950s. However, these earlier observations did not lead to practical applications, as the emitted light was not visible to the human eye. Holonyak's invention was a major breakthrough in the development of LED technology, and paved the way for the further development of LEDs that emit other colors of light.

Learn more about LED, here:

https://brainly.com/question/30871146

#SPJ4

For fuel gas and oil applications, the maximum operating pressure with MegaPress G is 125 psi (pounds per square inch). MegaPress G is specifically designed for use with gas and oil applications, providing a safe and efficient method of connecting pipes while ensuring proper pressure management.

Maximum operating pressure with MegaPress G for fuel gas or oil applications: 125 psi (pounds per square inch) is the maximum operating pressure with MegaPress G for fuel gas and oil applications. This indicates that MegaPress G is made to safely withstand pressures of up to 125 psi in applications involving gasoline, gas, and oil.

MegaPress G is specifically intended for use in gas and oil applications. It is therefore tailored to the special qualities of these materials and built to withstand the strains and pressures that are typical in these applications.

Provides a method for safely and effectively joining pipes: For joining pipes in gas and oil applications, MegaPress G offers a secure and effective solution. The press fitting approach does not require threading, soldering, or welding, which can be labour-intensive and even dangerous. Instead, a secure and dependable connection is made by compressing the fittings onto the pipe using a press tool.

Assures correct pressure management: In gas and oil applications, where high pressures may be present, proper pressure management is crucial. MegaPress G is made to provide a safe and dependable connection between pipes to maintain optimum pressure management. Leakage, which can result in pressure decreases and other problems are reduced as a result.

In conclusion, MegaPress G was created primarily for use in gas and oil applications, and it is capable of handling pressures of up to 125 psi without harm. It offers a reliable and safe way to join pipes while guaranteeing correct pressure control to reduce the possibility of leaks and other problems.

Learn more about the MegaPress :

https://brainly.com/question/31597386

#SPJ11

Quartz and glass-panel electric units are classified as radiant heaters. These heaters use infrared radiation to transfer heat directly to objects and people, providing efficient and targeted warmth.

How can we explain radiant heaters?

Radiant heaters are a type of heating system that works by emitting infrared radiation to warm up objects and people in a room rather than heating up the air itself. This makes them an efficient and effective option for heating small spaces as well as outdoor areas like patios and garages.

Radiant heaters come in a variety of forms, including electric, gas, and propane. Electric radiant heaters use electricity to generate heat, while gas and propane radiant heaters burn fuel to create heat. Some models are designed to be mounted on walls or ceilings, while others are portable and can be moved around as needed.

The way radiant heaters work is by emitting infrared radiation, which is absorbed by objects and people in the room. This causes the objects to warm up, and the heat is then radiated back into the room. Unlike traditional forced-air heating systems, which heat up the air and rely on fans to distribute the warm air throughout a space, radiant heaters provide direct, localized heat to the objects and people in a room.

to know more about radiant heaters:

https://brainly.com/question/17190698

#SPJ11

The depth of the water need to produce volumetric flow rate of 0.1 m3/s is about 63.88m

1. the first step to finding volumetric flow rate is to find velocity.

Volume flow = area x velocity  which is

0.1 m3/s = π(0.0075/2)2 x velocity

velocity = 2.83 m/s

2. We need to find RE;

RE = ρVD/μ

998 x 2.83 x 0.075  ÷ 1.002 x 10⁻³ pa.s = 2.11 x 10⁵

This helps us determine friction;

f = 0.079 ÷ (2.11 x 10⁵) [tex]^\frac{1}{4}[/tex]

= 0.00267

3. Head loss due to friction should be;
hl = (4 x 0.0195 x 150 ÷ 0.075)  x  (2.83²) ÷ (2 x 9.81)

= 63.68

4. head loss due to coefficient of 0.5;

hlc = 0.5 x (2.83²) ÷ 2 x 9.81 = 0.204

5. Total head loss is therefore;

63.68 + 0.204 = 63.884

Find more exercises on volumetric flow rate;

https://brainly.com/question/31426489

#SPJ1

Exercises are an important part of creating a disaster recovery plan because they:

1. Test the effectiveness of the plan: By conducting exercises, you can identify any weaknesses or gaps in your disaster recovery plan, allowing you to make necessary adjustments to ensure its effectiveness.

2. Familiarize team members with the plan: Exercises provide an opportunity for team members to learn their roles and responsibilities in the recovery process, which helps ensure a smoother response during an actual disaster.

3. Improve communication and coordination: Practicing the disaster recovery plan helps to improve communication and coordination among team members, departments, and external partners, which is crucial for a successful recovery effort.

4. Build confidence in the plan: Exercises help to build confidence in the disaster recovery plan, ensuring that team members trust the procedures and are more likely to follow them during a real disaster.

5. Meet compliance requirements: Some industries and organizations are required to conduct regular disaster recovery exercises to meet compliance standards, such as those set by government agencies or industry-specific regulations.

By incorporating exercises into your disaster recovery plan, you can improve the overall preparedness of your organization and increase the likelihood of a successful recovery following a disaster.

To know more about disaster recovery

https://brainly.com/question/31364849?

#SPJ11

Fire Wardens are not required to be the first to leave the floor during alarms to set an example. Thus, its D.

In fact, Fire Wardens should remain on their floor until all occupants have been safely evacuated and accounted for, as their primary responsibility is to assist with the safe and orderly evacuation of the building. They should also be available to answer questions from occupants and provide additional assistance as needed.

Fire Wardens are designated personnel responsible for assisting with the safe evacuation of a building during a fire or other emergency. They are trained to respond to fire emergencies and to help coordinate the implementation of the building's Emergency Action Plan (EAP).

Learn more about Fire Wardens, here

https://brainly.com/question/14391851

#SPJ4

A consequence of the type of atomic bonding within most ceramics is their typically high melting points and brittleness. Ceramics are often composed of ionic or covalent bonds between atoms.

Ionic bonds occur when there is a transfer of electrons from one atom to another, resulting in positively charged cations and negatively charged anions that are held together by electrostatic forces. Covalent bonds occur when atoms share electrons to form a stable bond.

The ionic or covalent bonding in ceramics tends to result in a rigid and tightly packed crystal structure with strong chemical bonds, which gives ceramics their characteristic properties. However, this type of atomic bonding also has consequences:

High melting points: Ceramics often have high melting points due to the strong ionic or covalent bonds between atoms. This means that ceramics generally require high temperatures to melt or deform, which can limit their processability and ease of shaping compared to other materials.

Brittle behavior: Ceramics are known for their brittle behavior, meaning that they tend to fracture rather than deform under stress. This is because the ionic or covalent bonds in ceramics are strong, but also brittle, and do not allow for much plastic deformation. This makes ceramics susceptible to cracking or breaking under applied stress, which can limit their use in certain applications that require toughness or resistance to impact.

Low ductility: Ceramics typically have low ductility, which refers to their ability to stretch or deform without fracturing. This is again due to the strong and brittle nature of the atomic bonds in ceramics, which limits their ability to undergo plastic deformation without fracturing.

learn more about   Ceramics  here:

https://brainly.com/question/13508244

#SPJ11