The total kinetic energy, Ktotal, of the uniform solid cylindrical disk of mass M = 1. 4 kg and radius R = 0. 085 m is (D) 393.8 J.
To solve this problem, we need to use the formula for the kinetic energy of a rotating object, which includes both translational and rotational kinetic energy.
The translational kinetic energy of the disk is given by 1/2 mv², where m is the mass of the disk and v is its velocity. In this case, m = 1.4 kg and v = 15 m/s, so the translational kinetic energy is 1/2 (1.4 kg) (15 m/s)² = 157.5 J.
The rotational kinetic energy of the disk is given by 1/2 Iω², where I is the moment of inertia of the disk and ω is its angular velocity. For a solid cylindrical disk, the moment of inertia is 1/2 MR². We also know that the disk is rolling without slipping, so the velocity of its center of mass is equal to the product of its angular velocity and its radius, v = ωR. Solving for ω, we get ω = v/R.
Substituting these values into the formula for rotational kinetic energy, we get 1/2 (1/2 MR²) (v/R)^2 = 1/8 Mv². Plugging in the values for M and v, we get 1/8 (1.4 kg) (15 m/s)² = 236.3 J.
Adding the translational and rotational kinetic energies together, we get Ktotal = 157.5 J + 236.3 J = 393.8 J.
Therefore, the correct answer is (D) 393.8 J.
Learn more about mass at: https://brainly.com/question/12242087
#SPJ11
A cat runs along a straight line (the x-axis) from point A to point B to point C, as shown in the figure. The distance between points A and C is 5. 00 m, the distance between points B and C is 10. 0 m, and the positive direction of the x-axis points to the right. The time to run from A to B is 20. 0 s, and the time from B to C is 8. 00 s. As the cat runs along the x-axis between points A and C what is its average speed?
To find the average speed of the cat, we need to use the formula:
Average speed = total distance ÷ total time
From the given information, we know that the total distance the cat runs is 5.00 m + 10.0 m = 15.0 m. The total time taken by the cat to run this distance is 20.0 s + 8.00 s = 28.0 s. Substituting these values in the formula, we get:
Average speed = 15.0 m ÷ 28.0 s
Average speed = 0.536 m/s (rounded to three significant figures)
Therefore, the average speed of the cat as it runs along the x-axis from points A to C is 0.536 m/s.
It's important to note that average speed only considers the total distance covered and the total time taken, regardless of any changes in direction or speed during the journey. In this case, the cat runs along a straight line, so its speed and direction remain constant.
Also, we can observe that the cat runs faster from point A to point B (20.0 s) than from point B to point C (8.00 s). However, the average speed takes into account the entire distance covered, so the slower speed over a longer distance from B to C brings down the average speed.
In conclusion, the cat's average speed on a straight line from points A to C is 0.536 m/s.
To know more about average refer here
https://brainly.com/question/24057012#
#SPJ11
A helicopter descends vertically to land with a speed of 4. 0 m/s. If the shock absorbers have an initial length of 0. 50 m, they compress to 79% of their original length and the air in the tires absorbs 21% of the initial energy as heat, what is the ratio of the spring constant to the helicopter's mass
k/m = (2 * g * Δh) / [((1 - 0.79) * original length)^2] - (2 * g * Δh) * 0.21 / E
To determine the ratio of the spring constant to the helicopter's mass, we need to consider the change in potential energy and the work done by the shock absorbers.
Change in Potential Energy:
The change in potential energy of the helicopter as it descends can be calculated using the formula: ΔPE = mgh, where m is the mass of the helicopter, g is the acceleration due to gravity, and h is the change in height.
In this case, the helicopter descends vertically, so the change in height is equal to the compression of the shock absorbers.
ΔPE = mgΔh
Work Done by the Shock Absorbers:
The work done by the shock absorbers can be calculated using the formula: W = (1/2)kΔx^2, where k is the spring constant and Δx is the change in length of the shock absorbers.
In this case, the shock absorbers compress to 79% of their original length, which means the change in length is Δx = (1 - 0.79) * original length.
W = (1/2)k[(1 - 0.79) * original length]^2
Energy Absorbed by the Air in the Tires:
The energy absorbed by the air in the tires can be calculated as a percentage of the initial energy. Let's denote the initial energy as E.
Energy absorbed = 0.21 * E
Since the energy absorbed by the air in the tires is heat energy, it does not contribute to the work done by the shock absorbers.
Equating the Energy:
The change in potential energy is equal to the sum of the work done by the shock absorbers and the energy absorbed by the air in the tires:
ΔPE = W + Energy absorbed
mgΔh = (1/2)k[(1 - 0.79) * original length]^2 + 0.21 * E
Now we can solve for the ratio of the spring constant (k) to the helicopter's mass (m):
k/m = (2 * g * Δh) / [((1 - 0.79) * original length)^2] - (2 * g * Δh) * 0.21 / E
Please note that to obtain a specific numerical value for the ratio, we would need to know the values of g, Δh, original length, and E.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
A meter-stick supports two masses at either end as shown. A single string hanging from the
ceiling to the stick will be used to suspend all three. Assuming the meter-stick has a mass of
100 grams, calculate the correct marking on the stick which will enable the system to remain
horizontal. (Let g = 10m/s2. )
The correct marking on the stick which will enable the system to remain horizontal is 48.5 cm from the left end of the meter stick.
Since the system is in equilibrium, the sum of the torques acting on it must be zero. We can choose any point as the axis of rotation, but it is convenient to choose the left end of the meter stick. In that case, the torques due to the masses m₁ and m₂ are:
τ₁ = m₁ g (x - L/2)
τ₂ = m₂ g (L/2 - x)
where L is the length of the meter stick, and g is the acceleration due to gravity.
The torque due to the meter stick itself is:
τ₃ = (1/2) M g (L/2)
where M is the mass of the meter stick.
Since the system is in equilibrium, the sum of these torques must be zero:
τ₁ + τ₂ + τ₃ = 0
Substituting the expressions for τ₁, τ₂, and τ₃, we get:
m₁ g (x - L/2) + m₂ g (L/2 - x) + (1/2) M g (L/2) = 0
Simplifying and solving for x, we get:
x = (m₁ - M/3) L / (m₁ + m₂ + M/3)
Substituting the given values, we get:
x = (m₁ - 0.1) 1 / (m₁ + m₂ + 0.1/3)
We don't know the values of m₁ and m₂, but we know that the system is in equilibrium, so the weight of m₁ plus the weight of m₂ plus the weight of the meter stick must be equal to zero:
m₁ g + m₂ g + M g = 0
Substituting M = 0.1 kg and g = 10 m/s², we get:
m₁ + m₂ = 1
We can now substitute m₂ = 1 - m₁ in the expression for x:
x = (m₁ - 0.1) / (1 + 0.1/3 - m1)
To find the value of m₁ that makes x equal to L/2 (the midpoint of the meter stick), we set x = L/2 and solve for m₁:
L/2 = (m₁ - 0.1) / (1 + 0.1/3 - m₁)
Simplifying, we get:
2(m₁ - 0.1) = (1 + 0.1/3 - m₁)
Solving for m₁, we get:
m₁ = 0.485 kg
To know more about meter-stick, here
brainly.com/question/15298079
#SPJ4
A 5.10 kg cast-iron skillet is heated on the stove from 295 k to 450 k. how much heat had to be transferred to the iron (specific heat of iron is 450j/kg k)?
The amount of heat transferred to the cast-iron skillet is approximately 351,450 J.
To calculate the amount of heat transferred to the cast-iron skillet, we can use the formula:
Q = m * c * ΔT
where:
Q is the heat transferred,
m is the mass of the skillet,
c is the specific heat capacity of iron, and
ΔT is the change in temperature.
Given:
m = 5.10 kg (mass of the skillet)
c = 450 J/(kg*K) (specific heat capacity of iron)
ΔT = 450 K - 295 K (change in temperature)
Let's calculate the heat transferred:
Q = (5.10 kg) * (450 J/(kg*K)) * (450 K - 295 K)
Q = 5.10 kg * 450 J/(kg*K) * 155 K
Q ≈ 351,450 J
To know more about heat refer here
https://brainly.com/question/1429452#
#SPJ11
which of the following is incorrect
Calcium reacts with water to form calcium is an incorrect statement. Option A
What is incorrect?When calcium reacts with water, it forms calcium hydroxide and hydrogen gas, according to the following equation:
Ca + 2H2O → Ca(OH)2 + H2
Therefore, the correct statement should be: Calcium reacts with water to form calcium hydroxide and hydrogen gas.
B. Magnesium reacts very slowly with water but faster with warm water is a correct statement.
C. Iron will not react with water in the absence of air is a correct statement.
D. Sodium reacts with water is a correct statement. When sodium reacts with water, it forms sodium hydroxide and hydrogen gas, according to the following equation:
2Na + 2H2O → 2NaOH + H2
E. Copper reacts with steam is an incorrect statement. Copper does not react with steam, but it reacts with hot concentrated sulfuric acid to form copper(II) sulfate, sulfur dioxide gas, and water, according to the following equation:
Cu + 2H2SO4 → CuSO4 + SO2 + 2H2O
Learn more about elements:https://brainly.com/question/13025901
#SPJ1
Missing parts;
Which of the following statements is incorrect?
A. Calcium reacts with water to form calcium
B. Magnesium reacts very slowly with water but faster with warm water
C. Iron will not react with water in the absence of air
D. Sodium reacts with water
E. Copper reacts with steam
Delivery of medicines to particular organ or tissue in a human body with the help of a direct current is named electrophoresis. in this case, two oppositely charged plates are applied to the body. (a) find charge that passes through the body during 10 min electrophoresis procedure if current used was =8 ma. (b) find current density value if electrodes area was = 150×180 cm2
The charge that passes through the body during a 10-minute electrophoresis procedure with a current of: 8 mA is 4.8 Coulombs, and the current density value with an electrode area of 150x180 cm² is approximately 0.296 A/m².
The delivery of medicines to a specific organ or tissue in the human body using a direct current is known as electrophoresis. In this case, two oppositely charged plates are applied to the body.
(a) To find the charge that passes through the body during a 10-minute electrophoresis procedure with a current of 8 mA, you can use the formula: Charge (Q) = Current (I) × Time (t). Since the current is given in milliamperes (mA), you'll need to convert it to amperes (A) by dividing by 1,000: 8 mA / 1,000 = 0.008 A.
The time is given in minutes, so convert it to seconds: 10 minutes × 60 seconds/minute = 600 seconds. Now, you can find the charge: Q = 0.008 A × 600 s = 4.8 Coulombs.
(b) To find the current density, you'll need to use the formula: Current Density (J) = Current (I) / Area (A). The electrode area is given as 150 x 180 cm², so you need to convert it to square meters: (150 x 180 cm²) / (10,000 cm²/m²) = 0.027 m². Now you can find the current density: J = 0.008 A / 0.027 m² ≈ 0.296 A/m².
To know more about electrophoresis, refer here:
https://brainly.com/question/28709201#
#SPJ11
Circle the letter of each sentence that is true about how a psychrometer works.
a. The dry-bulb thermometer is cooled by evaporation when the wind blows.
b. The higher the humidity, the faster water evaporates from the bulb.
c. The wet-bulb thermometer reading is always higher than the dry-bulb reading.
d. When relative humidity is high, there is no difference between the wet-bulb and dry-bulb thermometer readings. (PLEASE HELP!!!)
A statement that is true about how a psychrometer works is "The higher the humidity, the faster water evaporates from the bulb". Therefore, the correct answer is b.
(a) is false because the dry-bulb thermometer is not cooled by evaporation when the wind blows. The dry-bulb thermometer measures the temperature of the air, while the wet-bulb thermometer measures the temperature of the air cooled by the evaporation of water from its wick.
(b) is true because the rate of evaporation from the wet-bulb thermometer depends on the humidity of the air. In humid air, there is less difference between the wet-bulb and dry-bulb readings because less evaporation occurs, while in dry air, more evaporation occurs and the wet-bulb temperature is lower.
(c) is false because the wet-bulb thermometer reading is always lower than the dry-bulb reading. The wet-bulb thermometer is cooled by the evaporation of water from its wick, which causes its temperature to be lower than that of the dry-bulb thermometer.
(d) is false because the difference between the wet-bulb and dry-bulb thermometer readings is greatest when the relative humidity is low. When the relative humidity is high, there is less evaporation from the wet-bulb thermometer, and the difference between the two readings is smaller.
In summary, a psychrometer works by measuring the difference in temperature between a dry-bulb thermometer and a wet-bulb thermometer, which is cooled by evaporation from its wick.
The rate of evaporation from the wet-bulb thermometer depends on the humidity of the air, and the difference between the two thermometer readings is greatest when the air is dry.
The wet-bulb thermometer reading is always lower than the dry-bulb reading, and the difference between the two readings is smaller when the relative humidity is high. Therefore, the correct answer is b.
To know more about psychrometer refer here:
https://brainly.com/question/21209194#
#SPJ11
a 1.06den silk fiber has reached its maximum tenacity value. how many grams (force) would it take to rupture such fiber when dry?
It would take approximately 4.77 grams (force) to rupture a 1.06 denier silk fiber when dry at its maximum tenacity value.
To calculate the force needed to rupture a 1.06 denier silk fiber at its maximum tenacity value when dry, you can follow these steps:
1. Convert the denier (den) to grams per meter (g/m): 1.06 den is equal to 1.06 grams per 9,000 meters (1 den = 1 g/9,000 m).
2. Calculate the length of the fiber in meters: 1.06 g / (1.06 g/9,000m) = 9,000 meters.
3. Determine the maximum tenacity value of silk fiber, which is typically around 4-5 grams/force per denier (g/den) when dry. Let's assume a maximum tenacity value of 4.5 g/den.
4. Calculate the force required to rupture the fiber: 1.06 den × 4.5 g/den = 4.77 grams (force).
Therefore, it would take approximately 4.77 grams (force) to rupture a 1.06 denier silk fiber when dry at its maximum tenacity value.
Learn more about tenacity value here:-
https://brainly.com/question/30673054
#SPJ11
Find the direction and magnitude of :
1. The vector sum A + B [10. 22m, 145. 16°]
2. The vector A - B, [49. 56m, 157°] and
3. The vector difference B - A. [49. 56m, 337].
The direction and magnitude of the three given vectors are:
1. A + B: magnitude = 26.07m, direction = -49.62°
2. A - B: magnitude = 49.56m, direction = 12.84°
3. B - A: magnitude = 49.56m, direction = 191.16°.
To find the direction and magnitude of the given vectors, we can use the trigonometric functions of sine, cosine, and tangent.
1. The vector sum A + B [10.22m, 145.16°]:
To find the magnitude, we use the formula: |A + B| = √(A^2 + B^2 + 2ABcosθ). Plugging in the values, we get |A + B| = √(10.22^2 + 22^2 + 2(10.22)(22)cos(145.16°)) = 26.07m. To find the direction, we use the formula: tanθ = (Bsinθ + Asin(180°-θ))/(Bcosθ + Acos(180°-θ)). Plugging in the values, we get tanθ = (-22sin(145.16°) + 10.22sin(34.84°))/(-22cos(145.16°) - 10.22cos(34.84°)) = -1.23. Therefore, the direction is θ = -49.62° (measured counterclockwise from the positive x-axis).
2. The vector A - B, [49.56m, 157°]:
To find the magnitude, we simply take the absolute value of A - B, which is 49.56m. To find the direction, we can subtract the angle of B from the angle of A, which gives us 12.84° (measured counterclockwise from the positive x-axis).
3. The vector difference B - A, [49.56m, 337°]:
To find the magnitude, we simply take the absolute value of B - A, which is also 49.56m. To find the direction, we can subtract the angle of A from the angle of B, which gives us 191.16° (measured counterclockwise from the positive x-axis).
For more about direction and magnitude:
https://brainly.com/question/3411372
#SPJ11
If light travels around 10 trillion km in 1 year, how long would it take light to reach earth from a star that is 390 trillion km away?
It would take light about 1.3 million seconds, or approximately 15.05 days, to reach Earth from a star that is 390 trillion km away.
If light travels around 10 trillion km in one year, it means that its speed is approximately 300,000 km/s.
To find out how long it would take light to reach Earth from a star that is 390 trillion km away, we need to divide the distance by the speed of light.
390 trillion km ÷ 300,000 km/s = 1,300,000 seconds
So it would take light about 1.3 million seconds, or approximately 15.05 days, to reach Earth from a star that is 390 trillion km away.
To know more about Earth, refer here:
https://brainly.com/question/31064851#
#SPJ11
how far apart would two 100 kg persons need to be so that the force they exert on each other is equal to 1n? you can assume they are point masses, having mass but no size.
Two 100 kg point masses would need to be separated by a distance of 1.4 meters in order to experience a force of 1N between them.
This is because the force between two masses is inversely proportional to the square of their distance from each other. In other words, the farther apart two masses are, the weaker the force between them. The equation for this is F=G*m1*m2/r^2, where G is the gravitational constant, m1 and m2 are the respective masses, and r is the distance between them.
When m1 and m2 are 100 kg and F is 1N, it can be solved to find r = 1.4 meters.
Know more about gravitational here
https://brainly.com/question/3009841#
#SPJ11
a 500 g model rocket is on a cart that is rolling to the right at a speed of 3.0 m/s. the rocket engine, when it is fired, exerts an 8.0 n vertical thrust on the rocket. your goal is to have the rocket pass through a small horizontal hoop that is 20 m above the ground. at what horizontal distance left of the hoop should you launch?
The rocket should be launched about 12.3 meters to the left of the hoop to pass through it.
First, we need to calculate the time it takes for the rocket to reach the height of the hoop. We can use the kinematic equation:
y = v₁t + 1/2a*t²
Where y is the vertical displacement (20 m), v₁ is the initial vertical velocity (0 m/s), a is the acceleration due to gravity (-9.8 m/s²), and t is the time it takes to reach the height of the hoop.
Plugging in the values, we get:
20 m = 0 + 1/2*(-9.8 m/s²)*t²
Solving for t, we get:
t = √(40/9.8) ≈ 2.02 s
Now we can use the horizontal distance formula:
d = v₁t + 1/2a*t²
Where d is the horizontal distance, v₁ is the initial horizontal velocity (3.0 m/s), and a is the horizontal acceleration due to the rocket engine (unknown).
We know that the vertical thrust of the rocket engine (8.0 N) is equal to the weight of the rocket, so we can find the horizontal acceleration using:
a = F/m = 8.0 N / 0.5 kg = 16 m/s²
Plugging in the values, we get:
d = 3.0 m/s * 2.02 s + 1/2 * 16 m/s² * (2.02 s)²
d ≈ 12.3 m
To know more about thrust, here
brainly.com/question/15190995
#SPJ4
A baby mouse 1.2 cm high is standing 4.0 cm from a converging mirror having a focal length of 30 cm.
The height of the image is: h' = m × h = -0.84 × 0.012 = -0.01 m or 1.0 cm. This means that the image of the baby mouse is 1.0 cm high and is inverted, real, and smaller than the actual size of the object.
Height of the baby mouse, h = 1.2 cm = 0.012 m, Distance of the baby mouse from the converging mirror, u = 4.0 cm = 0.04 m, Focal length of the converging mirror, f = 30 cm = 0.3 m
We can use the mirror formula, which relates the distance of the object from the mirror (u), the distance of the image from the mirror (v), and the focal length of the mirror (f): 1/f = 1/v + 1/u
Since the mirror is converging and the object is outside the focal point, the image will be real, inverted, and smaller in size than the object.
We can use the magnification formula to find the height of the image: m = -v/u, (a negative sign indicates an inverted image)
Substituting the given values into the mirror formula, we get: 1/0.3 = 1/v + 1/0.04, v = 0.0336 m
Substituting the values for u and v into the magnification formula, we get: m = -0.84
The negative sign indicates an inverted image, and the magnitude of the magnification tells us that the image is smaller than the object by a factor of 0.84.
Therefore, the height of the image is: h' = m × h = -0.84 × 0.012 = -0.01 m or 1.0 cm. This means that the image of the baby mouse is 1.0 cm high and is inverted, real, and smaller than the actual size of the object.
To know more about converging mirror, refer here:
https://brainly.com/question/12696265#
#SPJ11
What would be the linear velocity of a boy's toes doing a cartwheel who is 2.1 m long from the tip of his toes to the end of his fingers and who is experiencing a centripetal force of 5.0 m/s2?
The linear velocity of the boy's toes during a cartwheel is 2.29 m/s. This demonstrates the relationship between centripetal force, radius, and velocity in circular motion.
To determine the linear velocity of a boy's toes during a cartwheel, we can use the formula for centripetal force and the formula for linear velocity. Centripetal force is given by [tex]F = mv^2/r[/tex], where m is the mass of the object, v is its velocity, and r is the radius of the circular motion.
In this case, the boy's toes are moving in a circular path during the cartwheel and are experiencing a centripetal force of 5.0 m/s².
To find the linear velocity of the boy's toes, we need to first calculate the radius of the circular path they are following. The length of the boy from his toes to the end of his fingers is 2.1 m, so the radius of the circular path is half this length, or 1.05 m.
Using the formula for centripetal force, we can solve for the velocity of the boy's toes as follows:
[tex]F = mv^2/r[/tex]
[tex]5.0 \;m/s^2 = m v^2 / 1.05 \;m[/tex]
[tex]v^2 = (5.0 \;m/s^2) \times 1.05 m[/tex]
[tex]v = \sqrt{(5.25)} m/s[/tex]
v = 2.29 m/s (rounded to two decimal places)
Therefore, the linear velocity of the boy's toes during a cartwheel is 2.29 m/s. This demonstrates the relationship between centripetal force, radius, and velocity in circular motion.
To know more about velocity refer here:
https://brainly.com/question/19979064#
#SPJ11
Judy shakes one end of a spring up and down with her hand to produce a wave. if she doubles the frequency at which she oscillates the spring, the wavelength in the spring will
a: not change
b: double
c: quadruple
d: halve
The correct answer is: (d) i.e. halve
If Judy doubles the frequency at which she oscillates the spring, the wavelength in the spring will halve. This is because the wavelength of a wave is inversely proportional to its frequency, meaning that as the frequency doubles, the wavelength must halve in order to maintain a constant wave speed.
Wavelength and frequency are related by the relation
L = v/f
where L= Wavelength
v = speed of the wave
f = frequency and therefore wavelength is inversely proportional to the frequency of the wave and when frequency doubles, wavelength must be halved.
Visit https://brainly.com/question/13533093 to learn more about wavelength
#SPJ11
Turn on the timer and click the green circular button to start a wave pulse. Stop the timer when the wave pulse first hits the end of the string (when the final bead first starts to move). Do this a couple times to get a precise measurement of the time it took the wave pulse to cross the string. What is the wave velocity
The wave velocity is calculated by dividing the wave pulse's total distance travelled by the length of time it takes to cross the string.
What is Wave velocity?
Wave velocity is the speed at which a wave travels through a medium. It is the distance that a wave travels in a given amount of time and is typically measured in meters per second (m/s). The velocity of a wave is determined by the properties of the medium through which it is traveling, such as the density, elasticity, and temperature of the medium.
To find the wave velocity, we need to measure the time it took for the wave pulse to travel across the string and the distance it traveled. By dividing the distance by the time, we can calculate the velocity of the wave.
To learn more about Wave velocity, visit;
https://brainly.com/question/13867834
#SPJ4
The total mass of the cart is 1. 00 kg, and the mass that is hanging is 0. 200 kg. Calculate the net force on the system, then the acceleration of the system
The total mass of the cart is 1. 00 kg, and the mass that is hanging is 0. 200 kg.
1. To calculate the net force on the system, we need to consider the forces acting on both masses. The mass hanging from the pulley experiences a gravitational force pulling it downwards, given by
Fgravity = m*g
Where m is the mass of the hanging object and g is the acceleration due to gravity (9.81 m/[tex]s^{2}[/tex]).
In this case, m = 0.200 kg, so
Fgravity = 0.200 kg * 9.81 m/[tex]s^{2}[/tex] = 1.96 N
This force is pulling the cart upwards with an equal and opposite force due to the tension in the string. Therefore, the tension force in the string is also 1.96 N.
The cart experiences two forces the tension force in the string pulling it to the right, and the force of friction opposing its motion to the left. Assuming the surface is rough enough to cause static friction, but not enough to cause the cart to slide, the force of friction can be calculated as
Ffriction = μs * Fnorm
Where μs is the coefficient of static friction and Fnorm is the normal force acting on the cart. The normal force is equal in magnitude to the weight of the cart, which is
Fnorm = m*g
Where m is the mass of the cart and g is the acceleration due to gravity.
In this case, m = 1.00 kg, so
Fnorm = 1.00 kg *9.81 m/[tex]s^{2}[/tex] = 9.81 N
Assuming a coefficient of static friction of μ_s = 0.3, we have
Ffriction = 0.3 * 9.81 N = 2.94 N
Since the tension force is pulling the cart to the right and the force of friction is opposing it to the left, the net force on the system is
Fnet = T - Ffriction
Where T is the tension force.
Plugging in the values, we get
Fnet = 1.96 N - 2.94 N = -0.98 N
The negative sign indicates that the net force is acting to the left.
2. To calculate the acceleration of the system, we can use Newton's second law
Fnet = mtotal * a
Where m_total is the total mass of the system (cart + hanging mass) and a is the acceleration.
In this case, mtotal = 1.00 kg + 0.200 kg = 1.20 kg.
Plugging in the value of the net force, we get:
-0.98 N = 1.20 kg * a
Solving for a, we get
a = -0.82 m/[tex]s^{2}[/tex]
The negative sign indicates that the acceleration is in the opposite direction to the tension force, i.e., to the left.
To know more about mass here
https://brainly.com/question/15313666
#SPJ4
An odd-shaped object rotates at a speed of 10. 0 rev/s. A small 25 g
mass with moment of inertia I=1. 5x10-6 kg∙m2 is dropped onto the
object at a distance of 4. 5 cm from its center of mass. The odd-shaped
object slows to a speed of 9. 0 rev/s. What is the moment of inertia of
the odd-shaped object?
The moment of inertia of the odd-shaped object is: approximately 1.67x10⁻³ kg∙m².
To find the moment of inertia of the odd-shaped object, we can use the conservation of angular momentum principle. Angular momentum before the mass is dropped equals angular momentum after the mass is dropped.
Initially, only the odd-shaped object is rotating with an angular speed of 10.0 rev/s. After the 25 g mass with a moment of inertia I=1.5x10⁻⁶ kg∙m² is dropped onto the object at a distance of 4.5 cm (0.045 m) from its center of mass, the system's angular speed slows to 9.0 rev/s.
First, let's convert the angular speed from rev/s to rad/s:
Initial angular speed (ω1) = 10.0 rev/s * 2π rad/rev ≈ 62.83 rad/s
Final angular speed (ω2) = 9.0 rev/s * 2π rad/rev ≈ 56.55 rad/s
Let I_obj be the moment of inertia of the odd-shaped object. The angular momentum before and after the mass is dropped can be written as:
I_obj * ω1 = (I_obj + I + m * r²) * ω2
Solving for I_obj, we get:
I_obj = [(I + m * r²) * ω2] / ω1
Substituting the given values:
I_obj = [(1.5x10^-6 kg∙m² + (0.025 kg * (0.045 m)^2)) * 56.55 rad/s] / 62.83 rad/s
After calculating the above expression, we find that the moment of inertia of the odd-shaped object is approximately 1.67x10⁻³ kg∙m².
To know more about inertia, refer here:
https://brainly.com/question/29259718#
#SPJ11
what is the apparant position of an object bellw a 6cm thick rectangular block of glass if a 4 cm water is on top of glass
note:in my book it took mew of glass independently .. (I mean with air but there is water is top of it, will it affect mew ?) (a pic is attached check it)
Yes, the presence of water on top of the glass block will affect the apparent position of the object.
Total apparent depth of the block and water is 8 cm.
Why does water affect apparent position?This is because the light rays passing through the water will refract or bend as they enter the glass block, and then bend again as they exit the glass and enter the air above.
To determine the apparent position of the object, you will need to know the refractive indices of water and glass. The refractive index of water is 1.33, and the refractive index of glass is typically around 1.5.
Assuming the light rays are traveling perpendicular to the surfaces of the block, the apparent depth of the block as seen from above the water line will be:
apparent depth = actual depth / refractive index
For the water, the apparent depth is simply its actual depth, since the light rays are not refracted when passing from air to water.
So, for the glass block:
apparent depth = 6 cm / 1.5 = 4 cm
And for the water:
apparent depth = 4 cm
Therefore, the total apparent depth of the block and water is 4 + 4 = 8 cm. If an object is placed below the water line but above the top surface of the block, its apparent position will appear to be shifted upward by this amount.
Find out more on apparent position here: https://brainly.com/question/30354612
#SPJ1
Four students are each given an identical resistor and asked to find its resistance. They each measure the potential difference across the resistor and the current in it. One student makes a mistake. Which row shows the results of the student that makes a mistake
Student B measured a potential difference and current and calculated a resistance of 2.18 ohms using Ohm's Law. The other three students also calculated the same resistance value, suggesting they made accurate measurements.
The row that shows the results of the student who made a mistake is B for potential difference and B for current. This is because the resistance calculated using Ohm's Law (resistance = potential difference/current) for these values is not the same as the resistance calculated by the other three students.
To find the resistance of a resistor, the potential difference (in volts) and current (in amperes) are measured. Using Ohm's Law, the resistance can be calculated by dividing the potential difference by the current. If one student makes a mistake in measuring either the potential difference or the current, their calculated resistance value will be incorrect.
In this case, student B measured a potential difference of 2.4 V and a current of 1.1 A. The resistance calculated using Ohm's Law is 2.18 ohms. The other three students all measured different potential differences and currents, but their calculated resistance values are all the same, indicating that they likely made accurate measurements.
In summary, if one student makes a mistake in measuring the potential difference or current of an identical resistor, their calculated resistance value will differ from the values calculated by the other students. This demonstrates the importance of careful and accurate measurements in scientific experiments.
To know more about Ohm's Law refer here:
https://brainly.com/question/30452191#
#SPJ11
Complete Question:
Four students are each given an identical resistor and asked to find its resistance. They each measure the potential difference across the resistor and the current in it. One student makes a mistake. Which row shows the results of the student that makes a mistake?
potential difference/V
A. 1.2
B. 2.4
C. 1.5
D. 3.0
current/A
A. 0.500
B. 1.100
C. 0.625
D. 1.250
A small object of mass m is shot horizontally from a spring launcher that is attached to a table. All frictional forces are considered to be negligible. The ball strikes the ground a distance d from the base of the table, as shown in the figure. A second object of mass m2 is launched from the same launcher such that the spring is compressed the same distance as in the original scenario. The distance from the base of the table that the object lands is.
The distance from the base of the table that the second object lands will be the same as the distance from the base of the table that the first object lands.
This is because the initial kinetic energy and spring potential energy that the objects possess is the same in both cases. The only difference between the two scenarios is the mass of the objects, which does not affect the distance traveled. This is because the time taken by the objects to travel the same distance is inversely proportional to their masses, so the total time taken by both objects to travel the same distance is the same.
This means that the distance traveled by both objects is the same, and hence the distance from the base of the table that the second object lands will be the same as the distance from the base of the table that the first object lands.
Know more about kinetic energy here
https://brainly.com/question/26472013#
#SPJ11
Someone's idea is for an electric fan that costs nothing to run. the electric motor which turns the fan also turns a generator. this produces electricity for the motor, so no battery or mains supply is needed! explain why this idea will not work.
The idea of an electric fan that costs nothing to run involves an electric motor turning the fan and a generator simultaneously.
This setup is meant to produce electricity for the motor, eliminating the need for a battery or mains supply. However, this idea will not work due to the principles of energy conservation and efficiency.
Firstly, the law of conservation of energy states that energy cannot be created or destroyed, only converted from one form to another.
In this system, the electric motor converts electrical energy into mechanical energy to turn the fan and the generator. The generator then converts the mechanical energy back into electrical energy to power the motor.
This cycle appears to create a perpetual motion machine, which defies the conservation of energy Secondly, no machine can be 100% efficient due to energy losses in the form of heat, sound, and other factors.
Friction between the motor, generator, and fan components would cause energy loss in the form of heat. Similarly, electrical resistance in the wires and other electrical components would also lead to energy loss.
To maintain the system's operation, additional energy would be required to compensate for these losses. This means that a battery or mains supply would still be necessary to keep the fan running.
In conclusion, the idea of an electric fan that costs nothing to run is not feasible due to the conservation of energy and the inefficiencies in real-world systems.
To know more about electric motor refer here
https://brainly.com/question/20263608#
#SPJ11
A rock is at the edge of a bluff and weighs 22n. If the potential energy of the snowball is 620 J, what is the height of the bluff?
To solve this problem, we need to use the concept of potential energy and the formula for calculating potential energy, which is:
Potential energy (PE) = mass (m) x gravity (g) x height (h)
We can rearrange this formula to solve for height:
Height (h) = PE / (m x g)
In this problem, we are given the weight of the rock, which is 22N. We can convert this to mass using the formula:
Mass (m) = weight (w) / gravity (g)
Gravity (g) is a constant, which is 9.8 m/s^2.
So, mass (m) = 22N / 9.8 m/s^2 = 2.245 kg
Now, we can use the given potential energy of the snowball, which is 620 J, to calculate the height of the bluff:
Height (h) = PE / (m x g) = 620 J / (2.245 kg x 9.8 m/s^2) = 27.33 meters
Therefore, the height of the bluff is 27.33 meters.
In general, potential energy is the energy that an object has due to its position or configuration. In this problem, the snowball has potential energy because it is at a certain height above the ground, which means it has the potential to do work if it is allowed to fall.
The height of the bluff is important because it determines how much potential energy the snowball has. The higher the bluff, the more potential energy the snowball has, and the greater the force it can exert if it falls. This is known as the snowball effect or the snowball principle, where a small change or action can have a big impact if it is allowed to snowball or accumulate over time.
To know more about potential energy refer here
https://brainly.com/question/24284560#
#SPJ11
Three 7kg masses are located at points in the xy plane. What is the magnitude of the resultant force (caused by the other two masses) on the mass at the origin? given the universal gravitational constant is 6.6726 x 10^-11.. Answer in units of N. 1) 2.466 x10^-8. (2) 3.08 x10^-8 (3) 2.8336x10^-8 (4) 2.2176x10^-8 (5) 3.2032x10^-8 (6) 2.7104x10^-8 (7) 2.464x10^-8 (8) 2.0944x10^-8 (9) 2.5872x10^-8 (10) 2.3408x10^-8
The magnitude of the resultant force (9). 2.5872 x 10⁻⁸N.
The magnitude of the gravitational force between two masses m₁ and m₂ separated by a distance r is given by:
F = G * m₁ * m₂ / r²
where G is the universal gravitational constant.
To find the resultant force on the mass at the origin, we need to calculate the gravitational forces exerted on it by the other two masses and then find the vector sum of those forces.
Let's assume the other two masses are located at points (x₁, y₁) and (x₂, y₂) in the xy plane. Then, the distances between the mass at the origin and the other two masses are:
r₁ = √(x₁² + y₂²)
r₂ = √(x₂² + y₂²)
The gravitational forces exerted on the mass at the origin by the other two masses are:
F₁ = G * 7kg * 7kg / r₁²
F₂ = G * 7kg * 7kg / r₂²
To find the direction of each force, we need to calculate the angles between the line connecting the mass at the origin and each of the other two masses, and the x-axis. The angles are given by:
θ₁ = atan2(y₁, x₁)
θ₂ = atan2(y₂, x₂)
Note that a tan2(y, x) returns the angle between the positive x-axis and the line connecting the origin to the point (x, y), measured counterclockwise from the x-axis.
The x and y components of each force are then given by:
F₁x = F₁ * cos(θ₁)
F₁y = F₁* sin(θ₁)
F₂x = F₂ * cos(θ₂)
F₂y = F₂ * sin(₂)
The resultant force on the mass at the origin is the vector sum of F₁ and F₂:
Fx = F₁x + F₂x
Fy = F₁y + F₂y
The magnitude of the resultant force is given by:
F = (Fx² + Fy²)
Plugging in the given values of G, m, x, and y, and evaluating the above equations, we get:
F = 2.5872 x 10⁻⁸N
Therefore, the answer is option (9).
To know more about magnitude
https://brainly.com/question/29680453
#SPJ1
A copper wire of length 10m and radius 1mm is extended by 1.5mm when subjected to a tension of 200N calculate the energy density of the wire.
Answer:
Explanation:
To calculate the energy density of the wire, we need to first calculate the strain energy stored in the wire.
The strain energy stored in the wire can be calculated using the formula:
U = (1/2) * F * deltaL
where U is the strain energy, F is the applied force, and deltaL is the change in length of the wire.
Here, the applied force is 200 N, and the change in length of the wire is 1.5 mm = 0.0015 m.
So, the strain energy stored in the wire is:
U = (1/2) * 200 N * 0.0015 m = 0.15 J
Now, we need to calculate the volume of the wire to determine the energy density.
The volume of the wire can be calculated using the formula for the volume of a cylinder:
V = pi * r^2 * L
where V is the volume, r is the radius, and L is the length of the wire.
Here, the radius of the wire is 1 mm = 0.001 m, and the length of the wire is 10 m.
So, the volume of the wire is:
V = pi * (0.001 m)^2 * 10 m = 7.853 x 10^-6 m^3
Finally, we can calculate the energy density of the wire using the formula:
Energy density = Strain energy / Volume
Energy density = 0.15 J / 7.853 x 10^-6 m^3
Energy density = 19,102,077.34 J/m^3
Therefore, the energy density of the copper wire is 19,102,077.34 J/m^3.
PLS MARK ME BRAINLIEST
Boyle’s law describes the relationship between pressure and
volume
. more specifically, it states that the relationship between these two quantities is
[ select ]
proportional. it is important to remember that boyle’s law only applies to
[ select ]
and situations when the
[ select ]
is constant.
Boyle's law describes the relationship between pressure and volume.
More specifically, it states that the relationship between these two quantities is inversely proportional. It is important to remember that Boyle's law only applies to ideal gases and situations when the temperature is constant.
Boyle's law, named after the physicist Robert Boyle, states that for a given amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other.
This means that as the pressure on a gas increases, its volume decreases, and vice versa, as long as the temperature remains constant.
Mathematically, Boyle's law can be expressed as:
P₁V₁ = P₂V₂
where P₁ and V₁ represent the initial pressure and volume, respectively, and P₂ and V₂ represent the final pressure and volume, respectively.
Boyle's law is derived from the kinetic theory of gases and is applicable to ideal gases under specific conditions. It assumes that the gas particles are point masses with negligible volume and that there are no intermolecular forces between them.
Additionally, Boyle's law assumes that the temperature remains constant during the process.
It's important to note that Boyle's law is not applicable to all gases in all situations. Real gases may deviate from ideal behavior, especially at high pressures or low temperatures, where intermolecular forces become more significant.
In such cases, additional corrections or other equations of state may be needed to describe the behavior of the gas accurately.
To learn more about volume, refer below:
https://brainly.com/question/1578538
#SPJ11
If you look through the lens toward the mirror, where will you see the image of the matchstick?.
Without knowing the specific setup of the lens and mirror, it is difficult to determine where the image of the matchstick will appear.
If you look through a lens toward a mirror, you will see the image of the matchstick at a virtual position behind the mirror.
It will depend on the positions and orientations of the lens and mirror, as well as the distance between them and the object being observed.
Here's the explanation:
1. Lens: The lens refracts or bends light rays as they pass through it. The specific characteristics of the lens, such as its shape and curvature, determine how the light is focused.
2. Mirror: The mirror reflects light rays that strike its surface. The image formed by a mirror is a result of the reflection of light.
When you look through the lens toward the mirror, the light from the matchstick first passes through the lens. The lens refracts the light and changes its direction. This refracted light then strikes the mirror.
The mirror reflects the light rays back toward the lens. The lens then refracts these reflected light rays again. The lens can act as a converging or diverging lens, depending on its shape and curvature.
In this scenario, if the lens is a converging lens (convex lens), it bends the light rays in such a way that they converge after passing through the lens. This convergence of light rays forms a virtual image behind the mirror.
Therefore, when you look through the lens toward the mirror, you will see the virtual image of the matchstick behind the mirror, in the area where the reflected light rays converge after passing through the lens. The exact position and characteristics of the image will depend on the specific lens and mirror configuration.
To know more about matchstick refer here
https://brainly.com/question/22015093#
#SPJ11
A man pushes a 10 kg block on a straight horizontal road by applying
a force of 5 N. As a result, he moves the block a distance of 10 meters
with an acceleration of 0. 2 m/s2. Calculate the work done by the
man on the block during motion.
The man does 50 J of work on the block during the motion.
To calculate the work done by the man on the block, we can use the formula:
Work = Force x Distance x Cos(theta)
where theta is the angle between the force and the displacement vectors. In this case, the force and displacement are in the same direction, so theta is 0.
Given that the force applied by the man is 5 N and the distance moved by the block is 10 meters, the work done by the man can be calculated as:
Work = 5 N x 10 m x Cos(0) = 50 J
Therefore, the man does 50 J of work on the block during the motion.
To know more about force, refer here:
https://brainly.com/question/13191643#
#SPJ11
The frequency of a slinky spring wave is 5 hertz with a wavelength of 0.8 meters. What is its velocity?
Answer:The frequency of a slinky spring wave is 5 hertz with a wavelength of 0.8 meters. What is its velocity?The speed can be found with a very simple equation: c = λ f = 0.8 ⋅ 5 = 4 m/s .
Explanation:
The speed can be found with a very simple equation: c = λ f = 0.8 ⋅ 5 = 4 m/s .
A skydiver is travelling at their terminal velocity. The skydiver pulls the parachute cord and the air resistance force becomes greater than the weight force. What does this cause to happen?
When a skydiver pulls the parachute cord, it causes: the air resistance force to become greater than the weight force.
This means that the skydiver will experience a sudden deceleration as the parachute opens up and increases the air resistance acting on the body. As a result, the skydiver will slow down and gradually come to a stop.
The terminal velocity, which is the maximum speed that the skydiver can achieve while falling, is reached due to a balance between the weight force and air resistance force. When the parachute is deployed, it significantly increases the air resistance force acting on the skydiver, and as a result, the skydiver's speed decreases rapidly.
The parachute slows down the skydiver to a safe landing speed and prevents them from hitting the ground with a deadly impact. Therefore, deploying a parachute is a crucial step in ensuring the safety of a skydiver during the landing process.
To know more about air resistance, refer here:
https://brainly.com/question/9143942#
#SPJ11
