plzzzzzzz help me quick

Answer:

D

Explanation:

Now we know that Force is the rate of change of momentum meaning

F= mv/t

But

mv/t = Ke

v/t = ke/m

a= ke/m

Where a is acceleration

K is constant of proportionality of tension on a spring

e is the extension substended by a string.

From the formula of acceleration we can see that as mass decreases acceleration increases so we can see that m = 1

We would have a maximum value of acceleration.

The Answer Is....:

D.

The available options are:

A. bartenders serving alcohol

B. students identifying their professors.

C. Doctors diagnosing cases of schizophrenia.

D. eyewitnesses identifying suspects from a lineup.

Answer:

A.  bartenders serving alcohol

Explanation:

This is because of the underage rule concerning sale of alcohol. Thus, there are occasional period in which underage person or a minor will want to buy alcohol, and without necessarily asking for the birth certificate or ID card that contains Age information, it is therefore, necessary for bartenders to be able to tell the age of their unfamiliar customers, by mere looking at them, so as not to sell to a minor.

Hemce, Rhodes research in guessing the age of unfamiliar person has important implications for BARTENDERS SERVING ALCOHOL, because it will guide them to determine Underage or Minor, that want to buy alcohol from them.

Answer:

ok

Explanation:

Ok

Answer:

Explanation:

The force acting to the right of the body is acting in the positive x direction while the force acting to the left of the body is acting in the negative x direction.

If a force of 12N acts to the left on a body and a force of 16 N acts to the right, force acting to the left will be -12N while that acting to the right will be +16N.

The resultant force acting on the bod will be the sum of the two forces.

Resultant = -12N+16N

Resultant = 4N

The direction of the resultant force will be towards the right since the resultant is a positive value.

Answer:

a) nuclear

Explanation:

Answer:

A fraction of the wave will be reflected at the junction and the remainder will be transmitted through the junction into the thin rope

Explanation:

When the junction of the thin and the thick rope is reached by the wave, the wave behaves in the following two ways;

1) A fraction of the incident wave from the thick rope to the junction/boundary of the thin rope will be reflected back to in the direction of the thick rope with a lower amplitude and upright

2) A fraction of the incident wave from the thick rope to the junction/boundary of the thin rope will be transmitted through the thin rope such that the transmitted pulse on the thin rope will have an higher amplitude than that of the thick rope due to the available energy in the wave pulse and the lesser weight of the thin rope.

Answer:

9.45 kWh

Explanation:

Energy = Power × time

E = 900 W × (1.5 h/day × 7 day)

E = 9450 Wh

E = 9.45 kWh

Answer:

20Amp

Explanation:

Using the transformer formula

Vs/Vp = Ns/Np = Ip/Is

Vs/Vp = Ip/Is

Vp is the primary voltage = input voltage

Vs is the secondary voltage = output voltage

Ip is the current in the primary coil

Is is the amount of current in the secondary coil.

If the transformer doubles its input voltage Vp, its output voltage Vs will be

decreased by 2 but the output current will be doubled

Given the input current Ip = 10A, the current in the secondary coil (output current) will be doubled i.e Is = 2(10) = 20A

The current in the secondary coil be "50 A". To understand the calculation, check below.

According to the question,

Current in primary coil, [tex]I_{in}[/tex] = 10 A

We know the relation,

Power = [tex]V_{in} I_{in}[/tex] = [tex]V_{out} I_{out}[/tex]

then,

→ [tex]V_{in} I_{in}[/tex] = [tex]V_{out} I_{out}[/tex]

By substituting the values,

   [tex]V_{in}[/tex] × 10 = 2 [tex]V_{in} I_{out}[/tex]

By applying cross-multiplication,

           10 = 2 [tex]I_{out}[/tex]

         [tex]I_{out}[/tex] = [tex]\frac{10}{2}[/tex]

                = 5 A

Thus the response above is correct.

Find out more information about current here:

https://brainly.com/question/24858512

Answer:

15 kg

Explanation:

F = m*a

F/a = m

210/14 = 15 kg

Answer:

X: Absorbs energy from the core.

Y: Releases energy to the photosphere.

Explanation:

Convection is a mode of heat transfer through fluids (liquids or gas), and it requires material medium for its propagation.

The energy absorbed from the core of the Sun, is transferred through X (convection zone) by convectional process, and it flows to Y (radiative zone). Since the regions X and Y have different functions, the heat propagates from X causing photons to traverse through Y where it get released into the photosphere or the Sun's surface.

Therefore;

X: Absorbs energy from the core.

Y: Releases energy to the photosphere.

Answer:

X: Takes longer for photons to move through

Y: Releases energy to the photosphere

Explanation:

Answer:

132.56N

Explanation:

Pressure is defined as force per unit area.

Expressed mathematically as;

P = F/A

Where P-pressure

F-force

A-area

From the above formula,

F= P×A

= 1.1013 × 10^5 × (3×4/10000)

= 11.013×12 =132.56N

Note: the unit of measure in cm is converted to m and since 100cm makes 1m for each sides 3cm and 4cm we convert to 'm' by dividing by 100 twice giving division by 10000)

The unit of measure Pa means Pascal and is the same as N/m2

Answer:

3ohms

Explanation:

From Ohm's Law

V = IR

V is that voltage = 3volts

I = current = 1amp

R = resistance in ohms

Putting those values into the above formula.

3volts = 1amp×R

Making R the subject

R = 3/1

R = 3ohms

The resistance of the light bulb is 3ohms.

Answer:

When objects fall to the ground, gravity causes them to accelerate.

Answer:

Inclined Plane is the answer

Answer:

Inclined plane

Explanation:

It is called Inclined plane since it is a flat surface at an angle.

Answer:

The force acting on it is lift

Answer: potential

Explanation:

Answer: Hope this is right

4 x 10^26 watts every second.

Explanation:

The sun, like all active stars, is a massive hydrogen-burning furnace producing huge amounts of light, heat and radiation, about 4 x 10^26 watts every second.

Answer: - 7500N

Explanation:

Given the following :

Initial Velocity of car = 108km/hr

Time taken to stop after applying brakes = 4s

Mass of passengers in car = 1000kg

Force exerted by the brakes on the car =?

After 4s, then final Velocity (V) = 0

Initial Velocity (u) of the car = 108km/hr

108km/hr = (108 × 1000)m ÷ (3600)s = 30m/s

Force exerted = mass(m) × acceleration(a)

Acceleration of car = Change in Velocity with time

a = (v - u) / t

a = (0 - 30) / 4

a = - 30/ 4

a = - 7.5m/s^2

Therefore,

Force exerted = mass(m) × acceleration(a)

Force exerted = 1000kg × (-7.5)m/s^2

Force exerted = - 7500N

Answer:

The force exerted by the brakes on the motor car is -7500 N.

Explanation:

Given :-

To find :-

Solution :-

Since the car stops, the final velocity (v) will be 0 m/s.

• Initial velocity (u) = 108 km/h.

Converting initial velocity into m/s.

We know that,[tex] \sf{1\:km/h=\dfrac{5}{18}\:m/s}[/tex]

Then initial velocity,

= [108 × 5/18 ] m/s

= 30 m/s

Now find the force exerted by the brakes.

★ Formula used :

[tex]{\boxed{\sf{F=\dfrac{m(v-u)}{t}}}}[/tex]

[tex]:\implies \sf \: F= \dfrac{1000(0 - 30)}{ 4} \\ \\ : \implies \sf \: F \: = \dfrac{ - 30000}{4} \\ \\ : \implies \sf \: F \: = - 7500[/tex]

The force exerted by the brakes on the motor car = -7500 N.

•The negative sign of force(F) means that the force was applied in opposite direction of motion.

Answer:the answer is B

Explanation:

APE X

The technology that is based on the work of Subrahmanyan Chandrasekhar is an orbiting observatory to detect X-rays from space objects, therefore the correct option is B.

Chandrasekhar's limit is a type of maximum limited value that is used to define the maximum mass of a white dwarf star. The generally internationally considered value of the Chandrasekhar limit is about 1.44 times the mass of the sun which is approximately 2.765×10³⁰ kg.

In other words, one can say that Chandrasekhar limit is the maximum value that can attain 1.44 times the solar mass.

In other words, one can say that star with a mass more than 1.44 times that of the Sun does not form a white dwarf but  continues to collapse, finally forming a neutron star

An orbiting observatory to detect X-rays from space objects is based on the principle of Chandrasekhar's limit. The correct option is B.

Learn more about Chandrasekhar's limit from here

https://brainly.com/question/7259500

#SPJ2

Answer:

nuclear fusion plants are fossil fuels, if you are asking which of the following is a fossil fuel

Explanation:

Answer:

The subjective visual sensation related to the intensity of light emanating from a surface or from a point source.

Newton's law of universal gravitation doesn't say anything about the cause of gravity.

Einstein's theory of relativity does.

Answer:

C Potential

Explanation:

Chemical potential energy is a form of potential energy related to the structural arrangement of atoms or molecules. This arrangement may be the result of chemical bonds within a molecule or otherwise. Chemical energy of a chemical substance can be transformed to other forms of energy by a chemical reaction.

Answer:

While making a bridge or a building, the first thing that comes to our mind is that these are always made by the combination of concrete and steel. Concrete is cheap, but it has the property of breaking when it is twisted or under tension. Steel is expensive, If we made the whole thing with it, it will cost a lot. To provide strength under a reasonable cost, we use the combination of concrete and steel. Another postive point which they have together is that they both expand equally under heat, because they have the same coefficient of thermal expansion. It proves really useful, because if they had different coefficients of thermal expansions, one would expand more than the other, which will create tensions in the mixture and would break it easily. In the case, many cracks would start to appear in the bridge or buildings, which will eventually break them.

Answer:

86605.08 N

Explanation:

The equation to calculate the force is:

Force = mass * acceleration

The force and the acceleration does not have the same direction in this case, so we need to decompose the force into its horizontal component, which is the force that will generate the horizontal acceleration:

Force_x = Force * cos(30)

Then, we have that:

Force_x = mass * acceleration

Force * cos(30) = 25000 * 3

Force * 0.866 = 75000

Force = 75000 / 0.866 = 86605.08 N

Answer:Ghana - Accra Togo - Lomé I hope this helps mark me brainlist

Explanation:

Accra is the Capital of Ghana

Accra was founded in the 17th century by the Ga people. It became the capital of the British Gold Coast in 1877 and the capital of Ghana on the formation of the country as an independent state in 1957
Accra Is the Second Most Expensive City in Africa

Accra is known for its colorful textile and used or second-hand clothing markets. Located inside the Makola Market, Kantamanto is the largest trading point in all of Accra.

The capital of Togo is Lomé

Lomé, city, capital of Togo. Lomé lies on the Gulf of Guinea (Atlantic coast) in the extreme southwestern corner of the country. Selected as the colonial capital of German Togoland in 1897, it became important as an administrative, commercial, and transport centre.

It is also the country's chief port, from where it exports coffee, cocoa, copra, and oil palm kernels- Lome

Lomé was founded by the Ewe, an indigenous ethnic group, in 1880. Located on the southwestern Atlantic coast of Togo, Lomé has a long history of trade. In 2000, an estimated 900,000 people resided in Lomé. Europe's “Scramble for Africa” began in 1880.

Answer:

the materials most often used to construct load bearing walls in large building are concrete ,block or brick . load bearing walls are one of the earliest forms of construction

Answer:

The magnitude of acceleration is 2m/s² .

Explanation:

First, you have to find the velocity as it starts to travel 200m in 10s. The formula of velocity is V = Distance/Time, then you have to substitute the values into the formula :

[tex]v = d \div t[/tex]

[tex]let \: d = 200 \\ let \: t = 10[/tex]

[tex]v = 200 \div 10[/tex]

[tex]v = 20m/s[/tex]

Next, you have to substitute the values into the acceleration formula, a = (v-u)/t where v represents final velocity, u is initial velocity and t is time taken :

[tex]a = \frac{v - u}{t} [/tex]

[tex]let \: v = 20 \\ let \: u = 0 \\ let \: t = 10[/tex]

[tex]a = \frac{20 - 0}{10} [/tex]

[tex]a = \frac{20}{10} [/tex]

[tex]a = 2m/ {s}^{2} [/tex]