Plsss help I will be giving branliest to most helpful answer

D. People with different goals can make contributions to scientific knowledge

Both Schwann and Virchow had different thoughts and ideas. Schwann wanted to understand how cells worked - Virchow wanted to know the origin of diseases. Different goals.

Answer:

D

Explanation:

I got it right on studyisland

Answer:

The correct option is the last option (Some dissolved solids may be nonelectrolytes)

Explanation:

Total dissolved solids (TDS) cannot be calculated by conductivity alone because conductivity involves ionic charges and there are solids that dissolve in water but do not carry ionic charges (and thus form non-electrolytes). Examples include sucrose (common sugar) and glucose. These two solids will dissolve in water but would not form ions that will carry ionic charges which are responsible for conductivity. Thus, if TDS only depends solely on conductivity, then a solution that contains dissolved sucrose will be wrongly accounted for as the sucrose will be omitted from the dissolved substances.

A valid reason why total dissolved solids (TDS) cannot be accurately

calculated by conductivity alone because some dissolved solids may be

non-electrolytes.

Conductivity means the ability of electric current to pass through a

substance and an electrolyte has a high conductivity when dissolved in

water.

Dissolved solids can't be measured by conductivity because not all

dissolved solids are electrolytes.

Read more on https://brainly.com/question/19457008

Answer:

4moles of carbon trihydride

Answer:

fehrf beviubeibchvbiscv kie v sjb rlj jsrubw

Explanation:

Answer:

6.711 × 10²⁴ molecules Mg(OH)₂

General Formulas and Concepts:

Chemistry - Atomic Structure

Explanation:

Step 1: Define

650.0 g Mg(OH)₂

Step 2: Define conversions

Avogadro's Number

Molar Mass of Mg - 24.31 g/mol

Molar Mass of O - 16.00 g/mol

Molar Mass of H - 1.01 g/mol

Molar Mass of Mg(OH)₂ - 24.31 + 2(16.00) + 2(1.01) = 58.33 g/mol

Step 3: Convert

[tex]650.0 \ g \ Mg(OH)_2(\frac{1 \ mol \ Mg(OH)_2}{58.33 \ g \ Mg(OH)_2} )(\frac{6.022 \cdot 10^{23} \ molecules \ Mg(OH)_2}{1 \ mol \ Mg(OH)_2} )[/tex]

= 6.71061 × 10²⁴ molecules Mg(OH)₂

Step 4: Check

We are given 4 sig figs. Follow sig fig rules.

6.71061 × 10²⁴ molecules Mg(OH)₂ ≈ 6.711 × 10²⁴ molecules Mg(OH)₂

Answer:

1.5 × 10² mL

Explanation:

Step 1: Given data

Step 2: Calculate the final volume of the gas

For an ideal gas, we can calculate the final volume of the gas using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 1.9 atm × 80 mL/1.0 atm

V₂ = 1.5 × 10² mL

Since the pressure decreased, the volume of the gas increased.

Answer:

Dissolves in water: Acetone, 1-propanol, Methanol

Do not dissolve in water: Hexane, Decane

Explanation:

From the principle that like dissolves like,polar substances will dissolve in polar solutions, while non-polar substances will dissolve in non-polar substances.

Water is a polar solution, therefore, polar substances will dissolve in it.From the given options:

Acetone is a polar molecule, therefore, it will dissolve in water.

1-propanol is a polar molecule, therefore, it will dissolve in water.

Hexane is a non-polar molecule, therefore, it will not dissolve in water.

Methanol is a polar molecule, therefore, it will dissolve in water.

Decane is a non-polar molecule, therefore, it will not dissolve in water

Answer:

0.013 mole.

Explanation:

From the question given above, the following data were obtained:

Time (t) = 94.6 mins

Current (I) = 224.8 mA.

Mole of electrons (e) =?

Next, we shall convert 94.6 mins to seconds. This is illustrated below:

1 min = 60 s

Therefore,

94.6 mins = 94.6 min × 60 s / 1 min

94.6 mins = 5676 s

Thus, 94.6 mins is equivalent to 5676 s.

Next, we shall convert 224.8 mA to ampere (A). This can be obtained as follow:

1 mA = 1×10¯³ A

Therefore,

224.8 mA = 224.8 mA × 1×10¯³ A / 1 mA

224.8 mA = 0.2248 A

Thus, 224.8 mA is equivalent to 0.2248 A.

Next, we shall determine the quantity of electricity flowing in circuit. This can be obtained as follow:

Time (t) = 5676 s

Current (I) = 0.2248 A

Quantity of electricity (Q) =?

Q = it

Q = 0.2248 × 5676

Q = 1275.96 C

Finally, we shall determine the mole of electron by converting the quantity of electricity (i.e 1275.96 C) to number of electrons. This can be obtained as follow:

96500 C = 1 e

Therefore,

1275.96 C = 1275.96 C × 1 e / 96500 C

96500 C = 0.013 e

Thus, the mole of electron trasfered in the process is 0.013 mole.

Answer:

cheese and bread

Explanation:

2 bread 1 cheese = cheese sandwich

Answer:

Magnesium oxide is an ionic compound that can be used as a building material. MO2 is actually a raw material that used in producing cement for building houses, buildings, and other constructions.

Explanation:

Explanation:

[tex]periodic \: law[/tex]

Answer

you already got it

Explanation:

Answer:

Lithosphere

Explanation:

Answer:

ether the crust or lithosphere

Explanation:

Answer:

This question is incomplete

Explanation:

This question is incomplete but the answer to the question can be correctly predicted from the available information from the question.

1. If a "container" (in this case a crucible) is closed throughout a heating experiment. Then it must be noted that water vapor will not be able to escape during the course of the experiment. The water vapor will form a "cloud" of water droplets under the cover of the crucible. And when this crucible is cooled, this water droplets return back to the content/substance inside the crucible.

2. When compared with the initial amount of water present in the substance in the crucible, the percentage of water "left" in the hydrate or substance in the crucible would be high. This is because the water vapor that was suppose to leave the crucible did not leave because the crucible was closed (thus causing very low amount of water vapour to leave).

Because of the student error, the percent water of crystallization value the hydrate will be lower than its actual value.

Evaporation is the process by which a liquid changes spontaneously to vapor.

In the experiment to determine percentage water of crystallization, the crucible is left open to ensure all the water molecules are removed by evaporation.

However,, since the student did not remove the crucible cover during heating, some water molecules will not be able to escape completely, but will return back to the salt.

Hence, the percent water of crystallization value the hydrate will be lower because the of mass of the anhydrous salt will be higher than its actual value.

Learn more about percent water of crystallization at: https://brainly.com/question/7805021

Answer:

As more discovers were made, Whittaker proposed classifying organisms into five Kingdoms

Answer:

physical property is property that you can touch, smell as it is bumpy it smells like eggs.

Explanation:

YW

Answer:

Physical properties include: appearance, texture, color, odor, melting point, boiling point, density, solubility, polarity, and many others.

Explanation:

Answer:

1 mole of sodium chloride ions

Explanation:

i hope this answer helps u

plz mark me as brainliest

Answer:

Copper, a metal known since ancient times, is used in electrical cables and pennies, among other things. ... Calculate the average atomic mass of copper. ... The atomic masses of the two stable isotopes of boron 10B (19.78%) and 11B (80.22%) are 10.0129 amu ... (.1978)(10.0129 amu) + (.8022)(11.0093 amu) =10.81 amu.

Explanation:

I hope I help :)

Answer: The number of molecules of gas the flask contains is [tex]0.674\times 10^{23}[/tex]

Explanation:

According to ideal gas equation:

[tex]PV=nRT[/tex]

P = pressure of gas = 1 atm   (STP)

V = Volume of gas = 2.50 L

n = number of moles  = ?

R = gas constant =[tex]0.0821Latm/Kmol[/tex]

T =temperature = 273K (STP)

[tex]n=\frac{PV}{RT}[/tex]

[tex]n=\frac{1atm\times 2.50L}{0.0821 L atm/K mol\times 273K}=0.112moles[/tex]

According to Avogadro's law:

1 mole of gas at STP contains =[tex]6.023\times 10^{23}[/tex] molecules

Thus 0.112moles of gas at STP contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.112=0.674\times 10^{23}[/tex] molecules

The number of molecules of gas the flask contains is [tex]0.674\times 10^{23}[/tex]

Answer:

Average atomic mass of chlorine is 35.48 amu.

Explanation:

Given data:

Percent abundance of Cl-35 = 76%

Percent abundance of Cl-37 = 24%

Average atomic mass = ?

Solution:

Average atomic mass  = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass)  / 100

Average atomic mass  = (76×35)+(24×37) /100

Average atomic mass =  2660 + 888 / 100

Average atomic mass  = 3548/ 100

Average atomic mass = 35.48 amu

Average atomic mass of chlorine is 35.48 amu.

Answer:

Democritus

Explanation:

Answer:

Democritus

Explanation:

They called him that because of his cheerfulness and how he treated people .

Hoped I helped-

Sleepy-

Explanation:

Igneous rocks are formed by the crystallisation of a magma. The difference between granites and basalts is in silica content and their rates of cooling. A basalt is about 53% SiO2, whereas granite is 73%. Intrusive, slowly cooled inside the crust.

Answer:

d. It's ability to lose electrons

Answer:

CaCO[tex]_{3s}[/tex]  →  CO[tex]_{2g}[/tex]   +   CaO[tex]_{s}[/tex]  

Explanation:

Given reactants:

 Omar heated small piece of calcium carbonate

Product;

  it gave off carbon dioxide gas and solid calcium oxide;

Problem,

Equation of the reaction;

Solution:

 Calcium carbonate →  Carbon dioxide + Calcium oxide

           CaCO[tex]_{3s}[/tex]  →  CO[tex]_{2g}[/tex]   +   CaO[tex]_{s}[/tex]  

Answer:

1st one is...

Explanation:

The 1st one is change in size or shape. 2nd one is formation of precipitate. 3rd one is physical change. 4th one is formation of gas.

Answer:

w/w means weight/weight

Therefore, in a 250 g of solution, 5% needs to be KCl,  

i.e. 5% x 250 = 12.5 g of KCl is needed.

The masses of KCl and H2O are needed to make 250 g of 5.00 % solution is 12.5 g of KCl and 237.50 g of H2O.

Since there is the solution of 250 g of 5.00 % solution

So, here

Mass of KCl is = 5% of 250 = 12.5 g

And, the mass of H2O is

= 250 - 12.5g

= 237.50 g

Hence, The masses of KCl and H2O are needed to make 250 g of 5.00 % solution is 12.5 g of KCl and 237.50 g of H2O.

Learn more about mass here: https://brainly.com/question/18470727.

Answer:last one

Explanation:

The most plausible reason why your new patient, Elisa, is feeling tired all the time is:

According to the complete question, we can see that the cells which are in Elise's body are receiving oxygen and proteins, but they are not getting enough glucose, which can be gotten from breaking down starch.

As a result of this, we can see that the best diagnoses of why Elise is always getting tired is that she has diabetes because of the inability of the body to break down starch to provide enough glucose to the body.

Read more here:

https://brainly.com/question/18470980