PLS HURRY I AM GIVING BRAINLIEST!!!
the question is in the photo!!

The distance between the installations is given as follows:

126.42 miles.

The Law of Cosines is a trigonometric formula that relates the lengths of the sides of a triangle to the cosine of one of its angles. It is also known as the Cosine Rule.

The Law of Cosines states that for any triangle with sides a, b, and c and angle B opposite to side b, the following equation holds true:

b^2 = a^2 + c^2 - 2ac cos(B)

The parameters for this problem are given as follows:

a = 143, c = 70, B = 62.1º.

Hence the distance b is obtained as follows:

b² = 143² + 70² - 2 x 143 x 70 x cosine of 62.1 degrees

b² = 15981.

[tex]b = \sqrt{15981}[/tex]

b = 126.42 miles.

More can be learned about the law of cosines at https://brainly.com/question/4372174

#SPJ1

Answer:

1

Step-by-step explanation:

7+10+1/5

7/10 = 0.7

1/5 = 0.2

0.7+0.2=0.9

Therefore it would be closest to 1.

Answer: 1

Step-by-step explanation:

To find an estimate, you need to round your fractions. Let's start with 7/10. First let's look at the numerator, 7. 7 is a number greater than 5, so we'll round it to 10 and you keep your denominator. so now we have 10/10, or 1. Then round 1/5. 1/5 is lower than 5, so we'll round it to 0. Now, for the final step add them. 1 + 0 = 1, so 1 is the answer

The equation, for the simple harmonic motion of a particle moving uniformly is s ( t ) = A x cos (ωt).

An object undergoing simple harmonic motion follows a periodic oscillation in a straight line, resembling a sinusoidal curve. Likewise, when an object continuously traverses upon a circle with uniform motion, its projection along the diameter travels back and forth in a simple harmonic motion pattern.

Assuming that the particle commences at the highest point of the simple harmonic motion at time t = 0, either the sine or cosine function is utilized to derive the equation for the simple harmonic motion formula. Thus, let us employ the cosine function in this instance:

s ( t ) = A x cos (ωt)

Find out more on simple harmonic motion at https://brainly.com/question/26114128

#SPJ1

An equivalent fraction to 1 whole and 7/8 is 15/8.

A fraction that has the numerator higher than or equal to the denominator is said to be inappropriate. It is, in other words, a "top-heavy" fraction since the fraction represents a value greater than one full unit.

1 whole and 7/8 can be written as a mixed number, which is a combination of a whole number and a fraction:

1 whole and 7/8 = 1 + 7/8

To find an equivalent fraction, we can convert the mixed number to an improper fraction by multiplying the whole number by the denominator of the fraction, and then adding the numerator. The result is the numerator of the improper fraction, and the denominator stays the same:

1 + 7/8 = (1 × 8 + 7)/8 = 15/8

Therefore, an equivalent fraction to 1 whole and 7/8 is 15/8.

For instance, the improper fraction 7/4 results from the numerator's (7), which is greater than the denominator (4).

To know more about improper fraction visit:

https://brainly.com/question/21449807

#SPJ1

Answer:

366,699

Step-by-step explanation:

to solve this problem, we can use the following formula for exponential growth:

population = initial population x (1 + growth rate)^time

where the initial population is the current population, the growth rate is the rate of increase per year, and the time is the number of years.

Plugging in the given values, we get:

population = 300,000 x (1 + 0.02)^10

Simplifying, we get:

population = 300,000 x 1.02^10

Using a calculator, we get:

population ≈ 366,698.79

Rounding to the nearest whole number, we get:

population ≈ 366,699

The population in 10 years will be approximately 366,699

The conclusion on the null hypothesis is B. Reject H₀ because the P-value is less than or equal to a.

It is posited that the mean pulse rate for a specific grouping of adult males equals 76 bpm as set forth by the null hypothesis. In its place, an alternative hypothesis suggests this figure does not reflect actuality.

At a given significance level identified by alpha = 0.05, rejection of the null hypothesis requires us to identify a P-value lesser than or equal to 0.05.

The P-value determined within the question happens to be below such a threshold at 0.0075, which results in the rejecting of the null hypothesis.

Find out more on null hypothesis at https://brainly.com/question/4436370

#SPJ1

Answer:

A

Step-by-step explanation:

based on summation, this is an integral from 1 to 6

answer choice A makes sense since plugging in K value gives appropriate riemann sum

Answer:

No Solution

Step-by-step explanation:

Because this solution deals with absolute value equations.

Answer:

B. $7.50

Step-by-step explanation:

We know profit or P-----P(n) where n is the quantity/number of the item) is the difference of the revenue-----R(n)-----and the cost-----C(n)

P(n) = R(n) - C(n)

Revenue is

R(n) = pn

Cost is a combination of

The cost function resembles a linear equation:

C(n) = mn + c

Since we're shown that P = 7.5n - (2.25n + 15), we know that R(n) must be R(n) = 7.5n and C(n) must be C(n) = 2.25n + 15

Thus, we know she charges $7.5 per necklace sold.

Next, using the matching x and y values for each row of the table, we can place a point for each row and connect it to the other points using a line.

A line represents a one-dimensional straight figure that can go on forever in both directions in geometry. To separate it from a curved or an angle-filled line, it is frequently referred to as a "straight line." Two points on a line define the line, while every other position on the line may be discovered by tracing the line through the two defined points. A line can be made with a pencils or another non-thick tool, and it can have any width or depth. Shape and figures are described and analysed using lines, which are a basic building block of geometry.

given

Minutes Taught Dollars Earned (30, 12, 60, 24)

90 36

120 48

We may plot the minutes taught on the x-axis and the money made on the y-axis to graph the data from the table.

Next, using the matching x and y values for each row of the table, we can place a point for each row and connect it to the other points using a line.

To know more about line visit:

https://brainly.com/question/2696693

#SPJ9

Using the tangent ratio, the value of x in the right triangle shown is calculated to the nearest tenth as: 2.6  units.

The tangent ratio is part of the trigonometry ratios that is applied when solving a right triangle, and it is expressed as:

tan ∅ = length of the opposite side / length of the adjacent side.

We are given the following information from the image above:

Reference angle (∅) = 43 degrees

length of the opposite side = x

length of the adjacent side = 2.8

Plug in the values:

tan 43 = x/2.8

2.8 * tan 43 = x

x = 2.6 [to the nearest tenth]

Learn more about the tangent ratio on:

https://brainly.com/question/30851664

#SPJ1

globe meaning a sphere, and since it has a diameter of 25.8, that means its radius is half that, or 12.9

[tex]\textit{volume of a sphere}\\\\ V=\cfrac{4\pi r^3}{3}~~ \begin{cases} r=radius\\[-0.5em] \hrulefill\\ r=12.9 \end{cases}\implies V=\cfrac{4\pi (12.9)^3}{3}\implies \stackrel{ using~\pi =3.14 }{V\approx 8987.47}[/tex]

a) There are 2 x 2 = 4 sample points in the sample space

b) Tree Diagram

O D.\nH\nHe\nT\nH\nT\n

Sample space: D. HH, HT, TH, TT

c) P(no tails) = P(HH)

= 1/4

d) P(exactly one tail) = P(HT, TH)

= 2/4

= 1/2

e) P(2 tails) = P(TT)

= 1/4

f) P(at least one tail) = P(HT, TH, TT)

= 3/4

In mathematics, tree diagrams are often used in probability and statistics to show all the possible outcomes of an event. In computer science, they are used to represent the hierarchical structure of files and directories in a file system

Read more about probability here:

https://brainly.com/question/24756209

#SPJ1

The workers percentile score is given as follows:

69.15%.

The z-score of a measure X of a normally distributed variable that has mean represented by [tex]\mu[/tex] and standard deviation represented by [tex]\sigma[/tex] is obtained by the equation presented as follows:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The z-score for this problem is given as follows:

z = 0.5.

Hence the percentile score is of 69.15%, as z = 0.5 has a p-value of 0.6915.

More can be learned about the normal distribution at https://brainly.com/question/25800303

#SPJ1

Answer:

$270:$30

Step-by-step explanation:

add up the ratios = 10

then do 300/10 = 30

so 1 ratio = 30

this means the ratio will be: $270:$30

Let me know if this helped

The solution to the prompt of multiple square roots is 5.

To obtain the sum of the multiple square roots, we need to first find the square of 30, sum it up in four places and find the square root of the last figure we obtained.

So this gives

√30 =5.47

5.47 + 5.47 + 5.47 + 5.47

= 21.88

=4.67 approximately 5

So. option 5 is the solution.

Learn more about square roots here:

https://brainly.com/question/428672

#SPJ1

Answer:

Step-by-step explanation:

-4+8-3-7+1-6-2+5

4-10-5+3

-6-2

-8

Step-by-step explanation:

the negative sign changes to a positive sign so

( -12)+ (-10) -(-7)+(-7)

= -22

Therefore , the solution of the given problem of area comes out to be the trapezium has a surface area of 39 square centimetres.

Calculating how much space would be needed for fully covering its exterior will reveal its overall dimensions. The surrounding environment is considered while selecting a comparable product with a rectangular shape. The surface area of anything determines its overall dimensions. The number of sides connecting a cuboid's four trapezoidal shapes determines how much water it can contain.

Here,

We can use the formula for a trapezoid's area if we assume that the shape is a trapezoid with parallel sides that are 9 cm and 4 cm and a height of 6 cm.

=> A = (a + b)h/2

where h is the height, and a and b are the lengths of the parallel sides.

When we enter the values we have, we obtain:

=> A = (9 + 4)(6)/2

=> A = 13(3)

=> A = 39

Consequently, the trapezium has a surface area of 39 square centimetres.

To know more about area visit:

https://brainly.com/question/2835293

#SPJ9

In a circle, the measure of a central angle is equal to the measure of its intercepted arc. Since ∠RST is a central angle of circle S and its measure is 102 degrees, the measure of its intercepted arc ⌢RT is also 102 degrees.

The circumference of a circle is given by the formula C = 2πr, where r is the radius of the circle. Since RS is a radius of circle S and its length is 6 units, the circumference of circle S is C = 2π * 6 = 12π units.

The length of an arc is proportional to its measure in degrees. Since the measure of ⌢RT is 102 degrees and the total measure of a circle is 360 degrees, the length of ⌢RT is (102/360) * 12π = 3.4π units.

Rounded to the nearest hundredth, this is approximately 10.68 units.

Answer: Directly proportional.

Step-by-step explanation:

      y = -x is directly proportional for a few reasons.

➜ The graph of this equation is a straight line, so all the ratios of points are equal.

➜ The constant of proportionality (k) is equal to -1.

➜ This line intersects the graph at the origin (0, 0).

➜ See the graph below.

Step-by-step explanation:

A.

Sequence 2:

25-2×5=15

25-2×6=13

25-2×7=11

25-2×8=9

25-2×9=7

Ordered pairs :

(13,15)

(16,13)

(19,11)

(21,9)

(24,7)

B.

Sequence1 :

The rule is 3x+2 for x starts by 1, so:

3×1+2=5

3×2+2=8

3×3+2=11

3×4+2=14

3×5+2=17

Sequence2

The rule is 2x+3 forx starts by 6, so :

2×6+3=15

2×7+3=17

2×8+3=19

2×9+3=21

2×10+3=23

Ordered pairs

(5,15)

(8,17)

(11,19)

(14,21)

(17,23)

The result of multiplying 5u by the difference between 3v and 4w is the vector -240i + 70j + 10.

In linear algebra, we often use scalars and vectors to perform various operations. Scalars are just ordinary numbers that can be used to multiply or divide vectors. On the other hand, vectors are quantities that have both magnitude and direction.

In this problem, we are given three vectors, u, v, and w, and we are asked to find the result of multiplying 5u by the difference between 3v and 4w.

First, let's calculate 3v - 4w. Since v = 4i - 2j and w = -2j, we can substitute these values to get,

3v - 4w = 3(4i - 2j) - 4(-2j)

= 12i - 6j + 8j

= 12i + 2j

Next, we need to find the scalar product of 5u and 12i + 2j. To find the scalar product of two vectors, we need to multiply the corresponding components and add up the products.

Therefore: 5u(3v - 4w) = 5u(12i + 2j)

= 5(-4i + j)(12i + 2j)

= -20i(12i) + 5i(2j) + 60j(i) - 10j(j)

= -240i + 10j + 60j + 10

= -240i + 70j + 10

So, the result of multiplying 5u by the difference between 3v and 4w is the vector -240i + 70j + 10.

To know more about Scalar or Vector here

https://brainly.com/question/28518744

#SPJ1

Answer:

Step-by-step explanation:

The students cannot construct any triangles with the given side lengths because the sum of the two shorter sides of a triangle must always be greater than the longest side (i.e., the triangle inequality). However, in this case, 3 + 4 = 7, which is less than 8. Therefore, it is not possible to construct a triangle with sides of length 3, 4, and 8 inches.

So, the correct option is A - "They cannot construct any triangles with the given side lengths."

Answer:

[tex]\dfrac{f}{g}(x) = \boxed{\dfrac{7}{x\left(x-3\right)}\\\\}[/tex]

Domain of  [tex]\dfrac{f}{g}: \boxed{\:\left(-\infty \:,\:0\right)\cup \left(0,\:3\right)\cup \left(3,\:\infty \:\right)}[/tex]

Step-by-step explanation:

Given

[tex]f(x) = \dfrac{7}{x} , g(x) = x - 3[/tex]

[tex]\dfrac{f}{g} = \dfrac{f(x)}{g(x)} = \dfrac{7}{x} \div x - 3\\\\= \dfrac{7}{x} \times \dfrac{1}{x-3}\\\\ = \dfrac{7}{x\left(x-3\right)}[/tex]

To find the domain of

[tex]\dfrac{f}{g} = \dfrac{7}{x\left(x-3\right)}[/tex]

note that this function is defined everywhere in the range (- ∞, ∞) except for x = 0 and x = 3

At these two points, the function is undefined since the denominator becomes 0 and division by 0 is undefined

Therefore the domain consists of three parts expressed in inequality and interval forms

-∞ < x < 0     (-∞, 0)

0 < x < 3      (0, 3)

3 < x < ∞      (3, ∞)

Therefore the domain is obtained by combining these three intervals
- ∞ < x < 0 or 0 < x < 3 or x > 3

In interval notation with union:
[tex]\:\left(-\infty \:,\:0\right)\cup \left(0,\:3\right)\cup \left(3,\:\infty \:\right)[/tex]   ANSWER

The rap about why triangular pyramids are the best shape is given below.

Verse 1:

Listen up, y'all, I'm here to spit some truth

About a shape that's often overlooked, but it's the truth

It's the triangular pyramid, and let me tell you why

It's the best shape out there, and that's no lie

Chorus:

Triangular pyramids, they're the way to go

Strong and sturdy, they're the best, you know

With their pointed tips and angled sides

They're the perfect shape, no need to hide

Verse 2:

When it comes to architecture, they're the top choice

Their shape is so versatile, you can't deny its voice

From ancient pyramids to modern buildings tall

The triangular pyramid can withstand it all

Chorus:

Triangular pyramids, they're the way to go

Strong and sturdy, they're the best, you know

With their pointed tips and angled sides

They're the perfect shape, no need to hide

Verse 3:

And let's not forget their mathematical prowess

Their angles add up to 180, no need to guess

With their faces all congruent, they're a sight to see

The triangular pyramid, it's the shape for me

Chorus:

Triangular pyramids, they're the way to go

Strong and sturdy, they're the best, you know

With their pointed tips and angled sides

They're the perfect shape, no need to hide

Outro:

So there you have it, folks, the triangular pyramid

It's the best shape out there, there's no need to forbid

From its strength to its geometry

The triangular pyramid, it's the shape for me!

Learn more about triangular pyramids at:

https://brainly.com/question/30995467?

#SPJ1

The given angles are 7π/4, 10π/3 & 510°.

Calculations for 7π/4(4th Quadarant)

sin(7π/4) = -1/√2

cos(7π/4) = 1/√2

tan(7π/4) = -1

cosec(7π/4) = -√2

cot(7π/4) = -1

sec(7π/4) = √2

Calculations for 10π/3(3rd Quadarant)

sin( 10π/3) = -√3/2

cos(10π/3) = -1/2

tan(10π/3) = √3

cosec(10π/3) = - 2/√3

cot(10π/3) = 1/√3

sec(10π/3) = -2

Calculations for 510°(2nd Quadarant)

sin( 510°) = 1/2

cos(510°) = -√3/2

tan(510°) = -1/√3

cosec(510°) = 2

cot(510°) = -√3

sec(510°) = -2/√3

#SPJ1

The endpoints of the latus rectum of the parabola equation is : f. The endpoints of the latus rectum are (-6, 9) and (-6, -15).

Standard form of the equation of a parabola =y (x - h)² = 4p(y - k)

Where:

(h, k) = vertex

4p = distance between the vertex and focus

Comparing this with (x + 3)² = -20(y + 1) will gives us

(x + 3)² = -20(y + 1)

= (x - (-3))² = -20(y - (-1))

The vertex of the parabola is = (-3, -1)

4p = -20

p = -20/4

p = -5

The line that is perpendicular to the axis of symmetry (line y = -1) and passes through the focus (-3, -6) is known as the latus rectum of a parabola. The line y = - 6—the focus—and the directrix are separated by a distance of 4p = 20.

The vertex which is located at (-3, -1) is the latus rectum's midway. The latus rectum tend to has a length of 20 and passes through the points (-3, -1). Its endpoints must be located on the line x = -3 since it is perpendicular to the axis of symmetry.

The endpoints of the latus rectum are:

(-3, -1 - 10) = (-3, -11) and (-3, -1 + 10) = (-3, 9).

Therefore, the correct option is f.

Learn more about latus rectum here:https://brainly.com/question/9474106

#SPJ1

1. To find the interest we will use = (D6*D5) - B8,  2. To find the total cost we will use = B6 + D7.

Here we are given the financial information of a firm and are required to give an appropriate formula for total interest and total cost

1.

Here we need to multiply D6 and D7 and subtract B8 from the result. We cannot use any function. Hence we will simply write

= (D6*D5) - B8

The bracket is not necessary but can be put s an added satisfaction that the said formula would multiply the cells first and then only will the loan amount would be subtracted.

2.

Similarly, for cell D8, we need to go to the formula bar and write

= B6 + D7

This will add the cells up to give us the total cost.

To learn more about MS Exel visit

https://brainly.com/question/29596467

#SPJ1

Complete Question

(Image Attached)

A linear function would best fit the data because as x increases, the y values change by an approximate constant. The rate of change of this function is approximately 8950 people a year.

To determine which type of function best fits the data, we can analyze the difference in the y values (Estimated Population) as x increases.

Differences between consecutive y values:

58,207 - 49,372 = 8,835

66,998 - 58,207 = 8,791

75,798 - 66,998 = 8,800

The differences between consecutive y values are relatively constant as x increases. This suggests that a linear function would be more appropriate than an exponential function

Read more on linear function here:https://brainly.com/question/15602982

#SPJ1