Answers
Answer:
B makes the most sense to me
Explanation:
Related Questions
How do computers multitask in an ideal situation?
a. slowly
b. every 30 seconds
c. manually
d.automatically
Answers
Answer:
Automatically
Explanation:
In an ideal situation, computers would multitask quickly and without human interference.
Documental acerca de los principales materiales que se emplean en la fabricación de medios técnicos utilizados en una oficina.
Answers
Answer:
Los equipos técnicos utilizados en una oficina y los principales materiales utilizados en su fabricación son;
Equipo de oficina [tex]{}[/tex] Material utilizado en la fabricación
1) Impresoras; [tex]{}[/tex] Acero, aluminio, alambres de cobre, plástico, rodillos
2) Monitor de computadora; [tex]{}[/tex] Pantalla de vidrio, plástico, cables, placas de circuito, resortes
3) Escáneres; [tex]{}[/tex] Alfombra compuesta, mesa de vidrio, carcasa de plástico, cables
4) Copiador; [tex]{}[/tex] Carcasa de plástico, contenedor de tóner, placa de vidrio, cables de alimentación
5) Proyector; [tex]{}[/tex] Lente de vidrio y carcasa de metal para lámpara, cables de alimentación
6) Desfibradora; [tex]{}[/tex] Engranajes de plástico, correa de cadena de metal, rodamientos
Explanation:
I need help writing the algorithm I know how to do the flow chart for the first one but I’m not sure if the second question is a for loop
Answers
Answer:
The algorithm is as follows:
(a) Sales and commission
1. Start
2. Input Sales
3. Commission = 0.30 * Sales
3. If sales >= 4000.00 then
3.1 Commission = 0.60 * Sales
4. End If
5. Print Commission
6. Stop
(b) Amount of Rainfall
1. Start
2. Days = 1
3. Total = 0.0
4. While Days <= 31
4.1. Input Rainfall
4.2. Total = Total + Rainfall
4.3. Days = Days + 1
4.4. End If
5. Print Total
6. Stop
See attachment for flowchart
Explanation:
(a) Sales and commission
This begins the algorithm
1. Start
This gets sales from the user
2. Input Sales
This calculates the commission based on 30% (i.e. for sales < 4000)
3. Commission = 0.30 * Sales
This checks if sales is greater than or equal to 4000
3. If sales >= 4000.00 then
This calculates the commission as 60% of Sales
3.1 Commission = 0.60 * Sales
This ends the if condition
4. End If
This prints the calculated commission
5. Print Commission
This ends the algorithm
6. Stop
(b) Amount of Rainfall
This begins the algorithm
1. Start
This initializes the number of days to 1
2. Days = 1
This initializes total rainfall to 0
3. Total = 0.0
The following while loop is repeated until day 31st
4. While Days <= 31
This gets input for Rainfall from the user
4.1. Input Rainfall
This calculates the total rainfall
4.2. Total = Total + Rainfall
This increments the number of days
4.3. Days = Days + 1
This ends the if statement
4.4. End If
This prints the total rainfall
5. Print Total
This ends the algorithm
6. Stop
Describe some common types of charts.
Answers
Pie chart.
Line chart.
Answer:
The four most common are probably line graphs, bar graphs and histograms, pie charts, and Cartesian graphs. They are generally used for, and are best for, quite different things.
Explanation:
Line chart- A graph with points connected by lines to show how something changes in value: • as time goes by, • or as something else changes.
Example: how you are improving at a quiz each day.
Bar chart- A graph drawn using rectangular bars to show how large each value is. The bars can be horizontal or vertical. It is a really good way to show relative sizes. We can use bar graphs to show the relative sizes of many things, such as what type of car people have, how many customers a shop has on different days and so on.
Histogram- a graphical display of data using bars of different heights. It is similar to a Bar Chart, but a histogram groups numbers into ranges . The height of each bar shows how many fall into each range.
Pie chart- a special chart that uses "pie slices" to show relative sizes of data. It is a really good way to show relative sizes.
Cartesian chart- This is a type of chart that uses coordinates to pinpoint where something is on a map or graph. Using Cartesian Coordinates we mark a point on a graph by how far along and how far up it is.
What are the basic parts of sewing machine?
Answers
Answer:
1. Spool Pin
Thread usually comes on a spool. That is the wooden thread holder you buy in the store. The spool pin holds the spool of thread for you making it easier for you to thread your machine and keep the thread coming as you want it to. Read about the spool pin felt.
2. Bobbin Binder Spindle
A bobbin is a little cylinder that may come with or without flanges. It holds the thread that is wound around it. The spindle is where the bobbin is placed during winding.
3. Bobbin Winder Stopper
The bobbin is only so large. It cannot always hold the amount of thread you want to put on it. This part stops the bobbin from collecting thread when it has reached full capacity.
4. Stitch Width Dial
On many newer sewing machines, you get a variety of stitch options to use. The purpose of this part is to control the zig-zag stitch option while you are busy concentrating on your sewing.
5. Pattern Selector Dial
This little dial allows you to select one stitch pattern out of the many that come built into your sewing machine. You just turn the dial to get the pattern that you want on your clothes and other fabrics you want to mend or create.
6. Hand Wheel
This is the manual needle control which raises or lowers the needle. It is usually located at the right-hand side of the machine. It shouldn’t be that hard to turn.
7. Stitch Length Dial
More recent sewing machines may have this part attached to them. Its purpose is to control the length of your selected stitch. This helps you stay in control of your sewing duties and make sure you get what you want and need.
8. Reverse Stitch Lever
Once you push this lever, you get to sew in the opposite direction. This function makes your sewing a little easier and faster to do because you can go forward or in reverse when you need to.
9. Power Switch
You already know what this switch does. The key to using it is to make sure you turned your sewing machine off before you walk away. Also, it should be located at the right side of your machine.
10. Bobbin Winder Thread Guide
When you activate this part on your sewing machine, you are guiding the thread towards the bobbin/ This makes winding your thread up a little easier and should prevent twists, tangles or caught thread.
11. Thread Tension Dial
Tension is important when you do your sewing. Too loose can cause you problems and too much tension could snap your thread and make sewing more time consuming as you have to re-thread the machine. This little part simply controls the tension on the thread so be careful when you use it.
12. Thread Take-Up Lever
Your top thread passes through this part as you do your sewing. The lever moves up and down with your needle so do not be alarmed that it is constantly moving.
13. Needle Clamp Screw
Needles do not stay in place by themselves. It would be nice if they did. You need this part to hold your needle where it is supposed to be. It also makes sure your needle is secure as it moves.
14. Presser Foot
This is the part that holds your fabric so it doe snot slip all over the place while you are working. Controlling your fabric is important while you do your sewing.
15. Bobbin Cover
Your sewing machine parts do need some protection to keep them in top working order and to help then last you for years. This is the job of the bobbin cover. It protects the bobbin as it covers it.
16. Bobbin Cover Release Button
Also, you need access to your bobbin when it its filled with thread or there is a problem. This release button helps you to remove the bobbin cover so you have complete access to your bobbin.
17. Feed Dog
It is an interesting name, but it has a very straightforward function., This part feeds your fabric through the sewing machine while you are sewing. This helps you concentrate on other sewing needs as you work.
18. Needle
Another self-explanatory label that tells you everything you need to know. The needle is an integral part of the sewing machine and without it, the other parts cannot do their job.
19. Needle Plate
This part is located right under the needle and an under the presser foot. Its job is to help move the fabric forward as you sew. It may help help push the fabric back when you use the reverse mode on your sewing machine.
Explanation:
Please help!!
The following are two different images that are encoded using the same algorithm. The images are each in a 5 by 5 grid of pixels where each pixel is black, white, red, green or blue.
The image on the left gets encoded and compressed down to 21 digits while the image on the right gets compressed down to 25 digits. Although the same algorithm was used to encode and compress these images, why are the end results a different length?
The algorithm was probably used improperly in the image on the right, causing it to be a longer length than it should have been.
Because this is a lossy compression, sometimes information is lost during the compression.
The amount of size reduction from compression depends on the amount of redundancy in the original data.
The image on the right uses more colored squares and therefore requires more digits to represent the pixels.
Answers
Answer: The amount of size reduction from compression depends on the amount of redundancy in the original data.
The reason why the end results have a different length is because: C. The amount of size reduction from compression depends on the amount of redundancy in the original data.
What is a lossy compression?A lossy compression is also referred to as irreversible compression and it can be defined as a type of data encoding (data compression algorithm) in which the data in a file such as an image, is removed by using inexact approximations, in order to reduce the amount of size of a file after decompression.
Since the same algorithm was used to encode and compress these images, the reason why the resulting images have a different length is simply because the amount of size reduction from compression depends on the amount of redundancy in the original image file (data).
Read more on lossy compression here: https://brainly.com/question/17542014
Which item would not generate a desktop alert by default in Outlook 2016?
new contact created
meeting request received
email received
task assignment received
i couldn't find this awnser and my teacher is extending our test period for another 20 minutes. please help
Answers
Answer:
New contact created does not generate a desktop alert by default.
Explanation:
edg.2021
Answer:
A
Explanation:
When you click on what will happen?
The font will change back to the default setting.
The document will change back to the last time you saved it.
The last step will be undone.
The last step will be redone.
Answers
The last step is undone. The default font choices in Microsoft Word are one of the biggest sources of ongoing annoyance for legal users.
What is Default setting?you can alter just two Styles (+Body and +Headings) permanently to give your papers a more professional typography.
There is a drop-down menu labeled Fonts over to the far right. You can view a list of preconfigured font sets by clicking on Fonts. You want to select Customize Fonts from here.
You can see the Body font and the Heading font on the left. Here is where you control the two Styles, +Body and +Headings, that I mentioned previously.
Therefore, The last step is undone.
To learn more about default font, refer to the link:
https://brainly.com/question/21104940
#SPJ1
Answer: C The last step will be undone. this is the Undo Icon
Explanation:
Do all careers or professions need computer science?
Answers
Answer:
no computer science is only needed for coders and engineers not for all is needed ok or one thing is that you study for your knowledge ok
Explanation:
hope it helps you
please mark me as brainlist
How computer networking improve communication.
Answers
Answer:
Explanation:
How do computer networks communicate?
Networking computers can also help you improve communication, so that:
staff, suppliers and customers can share information and get in touch more easily.
your business can become more efficient - eg networked access to a common database can avoid the same data being keyed multiple times, saving time and preventing errors.
Question #5
Multiple Choice
What is used within an HTML tag for additional information?
O attribute
O anchor
O hyperlink
metadata
Answers
Answer: Attribute
Explanation: Attribute is used in HTML tags for additional information. Correct on Edg 2021.
Answer: attribute
Edge '23
6. A presentation is widely used to present and effectively
Answers
Answer:
A Presentation is a collection of slides arranged in a systematic order. 2) A presentation ...
Explanation:
Please give thanks to all my answers and please mark as brilliant and please follow me
PLS HELP
1. You can tape a movie off Showtime.
a. if you use it for educational purposes.
b. only if you have written permission from the company.
c. so that it may be archived.
d. to use as an entertainment for your great students.
2. You may photocopy parts of the encyclopedia:
a. if it is for your use only.
b. only if your copy is of the subject you are researching.
c. if you don’t have a copy at home.
d. to pass out to all your students.
3. You may record a local symphony concert to share with your class:
a. as long as you don’t sell tickets to hear it.
b. as long as you use it at a listening center in your room.
c. if you relate it to your lessons.
d. you may not record a public performance of any kind.
4. You may make a copy of a computer program:
a. if you are giving it to a friend.
b. as long as you purchased it and are using it for a back-up copy.
c. as long as you downloaded it from the internet.
d. you may not copy software.
5. You may use any image from the Internet or clip art software:
a. if you know that no one will know.
b. if you save it as an “image” and give it a new name.
c. as long as it is confirmed to be “royalty free”.
d. you cannot copy any photograph, artwork, or image without permission.
Answers
Answer:
1. so that it may be archived
2.to pass out to all your students
3.if you relate it to your lessons
4.as long as you've purchased it and you are using it for back up copy
5.C
In a series circuit, resistance is?
Answers
Answer:
In a series circuit, the total resistance is equal to the sum of all resistances.
Explanation:
The same current passes through each resistor, so each resistor does its job as you would expect.
For Example:
a series circuit has a 2 Ω (ohm) resistor, a 5 Ω resistor, and a 7 Ω resistor. The total resistance of the circuit is 2 + 5 + 7 = 14 Ω.
time to throw poggers xqc time to throw pogchamp time to throw pogchamp time to throw pogchamp time to throw pogchamp time to throw houhouhouhou time to throw poogcham
Answers
Answer:
yep
Explanation:
# input a mark in a subject of a student and
Check if the student is pass or not pass [pass mark=30]
Answers
Answer:
mark = int(input("Enter mark: "))
if (mark >= 30):
print("Pass")
else:
print("Not pass")
PLS HELP ASAP Which is NOT a component of a packet?
trailer (footer)
protocol
body (payload)
header
Answers
1. ¿Dónde emergieron los Bancos Centrales? 2. ¿En qué siglo los Bancos Centrales se potenciaron? 3. ¿El Banco de Suecia en qué siglo fue fundado? 4. ¿En el año de 1694 qué Banco se creó? 5. ¿Quién creo en 1800 el Banco Francés? 6. ¿En qué siglo y años Estados Unidos creó el Banco Estados Unidos? 7. Entre 1861 -1865 Abraham Lincoln creo el primer Banco y único Banco Central ¿Cuál erasu objetivo? 8. ¿Cuál otras funciones cumplían los Bancos en el siglo XIX?
Answers
Answer:
. ¿Dónde emergieron los Bancos Centrales?
El primer banco central fue creado por el Parlamento Sueco en 1668, siendo su principal acreedor la Corona Sueca. Esto generó inflación y crisis financieras. Después de un siglo, en 1779, la ley fue modificada, obligando al Banco a que la masa monetaria fuese respaldada por oro en una proporción fija. Sin embargo, comenzó la guerra con Rusia y se regresó a su origen violando el precepto de estabilidad que confería ese patrón oro.
2. ¿En qué siglo los Bancos Centrales se potenciaron?
La historia de la banca central se remonta al menos al siglo XVII, con la fundación de la primera institución reconocida como un banco central, el Banco de Suecia.
3. ¿El Banco de Suecia en qué siglo fue fundado?
El primer banco central fue creado por el Parlamento Sueco en 1668.
4. ¿En el año de 1694 qué Banco se creó?
En 1694, se creó el Banco de Inglaterra, que sería el más famoso banco central durante casi 300 años.
5. ¿Quién creo en 1800 el Banco Francés?
Fue creado por Napoleón en 1800 para estabilizar la moneda después de la hiperinflación del papel moneda generado durante la Revolución Francesa y las conquistas napoleónicas.
6. ¿En qué siglo y años Estados Unidos creó el Banco Estados Unidos?
A principios del siglo XIX, Estados Unidos creó el Banco de los Estados Unidos (1791-1811) y luego un segundo Banco de los Estados Unidos (1816-1836) tras el cierre del primero. Ambos bancos se establecieron siguiendo el modelo del Banco de Inglaterra. Pero a diferencia de los británicos, los estadounidenses tuvieron una desconfianza profunda de cualquier concentración de poder financiero en general, y de los bancos centrales, en particular.
7. Entre 1861 -1865 Abraham Lincoln creo el primer Banco y único Banco Central ¿Cuál erasu objetivo?
Abraham Lincoln creó el primer y único Banco Central público del país, con el objetivo de garantizar los pagos de guerra.
8. ¿Cuál otras funciones cumplían los Bancos en el siglo XIX?
Se exigió la creación de una estructura crediticia flexible que fuera capaz de dar respuestas a las empresas de ferrocarril y a los barcos de vapor,
Explanation:
. ¿Dónde emergieron los Bancos Centrales?
El primer banco central fue creado por el Parlamento Sueco en 1668, siendo su principal acreedor la Corona Sueca. Esto generó inflación y crisis financieras. Después de un siglo, en 1779, la ley fue modificada, obligando al Banco a que la masa monetaria fuese respaldada por oro en una proporción fija. Sin embargo, comenzó la guerra con Rusia y se regresó a su origen violando el precepto de estabilidad que confería ese patrón oro.
2. ¿En qué siglo los Bancos Centrales se potenciaron?
La historia de la banca central se remonta al menos al siglo XVII, con la fundación de la primera institución reconocida como un banco central, el Banco de Suecia.
3. ¿El Banco de Suecia en qué siglo fue fundado?
El primer banco central fue creado por el Parlamento Sueco en 1668.
4. ¿En el año de 1694 qué Banco se creó?
En 1694, se creó el Banco de Inglaterra, que sería el más famoso banco central durante casi 300 años.
5. ¿Quién creo en 1800 el Banco Francés?
Fue creado por Napoleón en 1800 para estabilizar la moneda después de la hiperinflación del papel moneda generado durante la Revolución Francesa y las conquistas napoleónicas.
6. ¿En qué siglo y años Estados Unidos creó el Banco Estados Unidos?
A principios del siglo XIX, Estados Unidos creó el Banco de los Estados Unidos (1791-1811) y luego un segundo Banco de los Estados Unidos (1816-1836) tras el cierre del primero. Ambos bancos se establecieron siguiendo el modelo del Banco de Inglaterra. Pero a diferencia de los británicos, los estadounidenses tuvieron una desconfianza profunda de cualquier concentración de poder financiero en general, y de los bancos centrales, en particular.
7. Entre 1861 -1865 Abraham Lincoln creo el primer Banco y único Banco Central ¿Cuál erasu objetivo?
Abraham Lincoln creó el primer y único Banco Central público del país, con el objetivo de garantizar los pagos de guerra.
8. ¿Cuál otras funciones cumplían los Bancos en el siglo XIX?
Se exigió la creación de una estructura crediticia flexible que fuera capaz de dar respuestas a las empresas de ferrocarril y a los barcos de vapor,
PLEASE HELP ME! Sam was researching rocks and minerals. He thought the Web site looked unprofessional, so he looked for the author's information or credentials. He couldn't find any. Is this site reliable? A. Probably B. Probably not.
Answers
Answer:
B
Explanation:
If a site looks unprofessional and doesn't have any credentials, those are two signs that it's probably not very reliable.
What was the biggest challenge you faced in getting to where you are today and how did you overcome it? Peer counseling
Answers
What function does a resource manager in an IDE perform?
A. It's an interface for viewing and organizing files.
B. It's an interface for integrating text and multimedia into a website.
C. It's an environment for tracing and fixing the errors in the source code.
D. It's an environment for running and testing the source code.
E. It's an interface for creating and editing the source code.
Answers
Answer:
I would say D) Its an enviroment for running and testing the source code.
Explanation:
An integrated development environment (IDE) is a software suite that consolidates basic tools required to write and test software.
Developers use numerous tools throughout software code creation, building and testing. Development tools often include text editors, code libraries, compilers and test platforms. Without an IDE, a developer must select, deploy, integrate and manage all of these tools separately. An IDE brings many of those development-related tools together as a single framework, application or service. The integrated toolset is designed to simplify software development and can identify and minimize coding mistakes and typos.
Some IDEs are open source, while others are commercial offerings. An IDE can be a standalone application or it can be part of a larger package.
Answer:
D. It's an environment for running and testing the source code.
Explanation: plato 2023
the guest would like to convert his 100 dollar to peso.How much will the guest receive if the exchange rate is 1 dollar=Php 50.50?
Answers
Answer:
the answer is $100
I hope it helps
have a nice day
#Captainpower :~
Which language gives instructions on how text should appear on a web page?
__Blank__ language gives instruction on how text should appear on a web page.
Answers
Answer:
HTML
HTML stands for HyperText Markup Language, so HTML gives you a way to “mark up” your text with tags that tell the browser how your text is structured.
Answer:
Markup language
Explanation:
pls answer i need to turn it in today!!
In computing flowcharts how are decisions represented?
What is the command used most for decisions?
Answers
Answer:
See Explanation
Explanation:
How decisions are represented?
In flowcharts, decisions are represented using diamond shapes (see attachment)
Decisions could be conditional statement or repetition operations which may have the form of loops or iterations.
Either of theses are represented using the diamond shapes.
Take for instance:
To check if a is greater than b... Simply write if a > b i the diamond box
Command used for most decisions
Most decisions are conditional statements; hence, the if command is often used for decisions.
How do “right to work” states impact workers? (Select all that apply.) They have strengthened unions. They have given unionized workers more protections. They have made it possible to fire workers for any reason or no reason, so long as they are not fired for federally prohibited reasons. They have increased dues-paying union membership by as much as two-thirds. They have banned union-security agreements.
Answers
Answer:
"Right-to-work" states impact workers through;
They have banned union-security agreements
Explanation:
"Right-to-work-laws" are state laws that ban union security agreements that allows the trade or labor union to demand employees of an establishment to join the trade or labor union including the obligation of the employer to collect union dues on the union's behalf to reduce the effect of the free-rider problem as the benefit of union negotiation benefits non-union members who are also employees
The "right-to-work laws" prohibits agreements between employers of labor and employees which are members of the unions from stipulating the requirement that the cost of union representation is to be payed for by the workers
If someone said to you, “Pseudocode is a waste of time! It’s just more work because you end up writing the same program twice,” how would you explain the benefits of pseudocode?
Answers
Answer:
It allows the designer to focus on main logic without being distracted by programming languages syntax.
* Since it is language independent, it can be translated to any computer language code.
* It allows designer to express logic in plain natural language.
* It is easier to write actual code using pseudocode.
* Unlike algorithms, pseudocodes are concise so pseudocodes are more readable and easier to modify.
Explanation:
3.1.2 Quiz: What Can Information Technology Do for You? Question 8 of 10 What is one reason why a business may want to move entirely online? A. To double the number of employees B. To avoid paying state and local taxes C. To focus on a global market D. To limit the number of items in its inventory
Answers
Answer:
C. To focus on a global market
Explanation:
Information technology can be defined as a set of components or computer systems, which is used to collect, store, and process data, as well as dissemination of information, knowledge, and distribution of digital products.
An information technology interacts with its environment by receiving data in its raw forms and information in a usable format.
Generally, it is an integral part of human life because individuals, organizations, and institutions rely on information technology and systems in order to perform their duties, functions or tasks and to manage their operations effectively. For example, all organizations make use of information technology and systems for supply chain management, process financial accounts, manage their workforce, and as a marketing channels to reach their customers or potential customers.
Additionally, an information system or technology comprises of five (5) main components;
1. Hardware.
2. Software.
3. Database.
4. Human resources.
5. Telecommunications.
Hence, information technology or system relies on the data it receives from its environment, processes this data into formats that are usable by the end users.
One reason why a business may want to move entirely online is to focus on a global market through the use of social media platforms and networks to reach out to customers in various geographical location.
characteristics of the printer
Answers
What is this please help me ?
Answers
Answer:
C or A.. should be the answer
the computer stores the data and information on the ______
Answers
Answer:
Primary memory, it might be cpu but i think its primary memory
Explanation:
