Please help thanks in advance

Calculate the equilibrium constant K for the following reaction at 25°C from standard electrode potentials. Fe³(aq) + Cu(s) = Fe²(aq) + Cu²(aq)
The equation is not balanced. Use standard reduction electrode potentials.

305.6KJ are absorbed when 341 g of [tex]Ca(OH)_2[/tex]reacts via the following reaction.

The sum of the internal energy and the product of the pressure and volume of a thermodynamic system.

Given data:

[tex]Ca(OH)_2[/tex] (s) → [tex]CaO(s)+H_2O(l)[/tex],      ΔH=+65.3kJ

Moles of [tex]Ca(OH)_2[/tex]= [tex]\frac{mass}{molar \;mass}[/tex]

Moles of [tex]Ca(OH)_2[/tex] = [tex]\frac{341 g }{74g/mol}[/tex] =4.68 moles

Since, 1 mol [tex]Ca(OH)_2[/tex] absorbs 65.3kJ.

Therefore, 4.68 moles [tex]Ca(OH)_2[/tex] produce energy = 65.3kJ X 4.68 moles

=305.6KJ

Hence, 305.6KJ are absorbed when 341 g of [tex]Ca(OH)_2[/tex] reacts via the following reaction.

Learn more about enthalpy here:

https://brainly.com/question/3298339

#SPJ1

Answer:

[Na]^+ [Cl]^-

Explanation:

Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]

Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)

So the lewis structure would be:

[Na]^+  for sodium

and

[Cl]^- for chlorine

Sodium chloride:

[Na]^+ [Cl]^-

Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.

Answer:

Synthesis

Explanation:

Carbon + Difluorine = Tetrafluoromethane.

1 mole of Carbon [C] reacts with 2 moles of Difluorine [F2] to form 1 mole of Tetrafluoromethane [CF4]

Answer:

Ba(OH)2(aq) + H2SO4(aq) ----> BaSO4(s) + 2H2O(l)

Cr₂O₃ ( s ) + 3H₂S ( g ) → Cr₂S₃ ( s ) + 3H₂O ( l )

mol  Cr₂S₃ = 421 : 200.19 g/mol = 2.103

mol Cr₂O₃ ≈ mol Cr₂S₃ = 2.103 ( equivalent coefficient)

mass Cr₂O₃ = 2.103 x 151.99 g/mol = 319.63 gr

Answer: c) [tex]2\text{Na}_{3}\text{PO}_{4}+3\text{CaCl}_{2} \longrightarrow 6\text{NaCl}+\text{Ca}_{3}\text{(PO}_{4})_{2}[/tex]

Carbon dioxide in your blood usually causes no problems. But if you have too much or too little of it, you may have a disease or a health emergency.

Carbon dioxide (CO2) is an odourless, colourless gas.

A high concentration can displace oxygen in the air. If less oxygen is available to breathe, symptoms such as rapid breathing, rapid heart rate, clumsiness, emotional upsets and fatigue can result.

As less oxygen becomes available, nausea and vomiting, collapse, convulsions, coma and death can occur.

Learn more about the carbon dioxide here:

https://brainly.com/question/13955724

#SPJ1

The Ammonia present in 2.5 mole of Ammonia is 42.5grams.

A mole is a measuring unit in Chemistry to measure the number of atoms in certain molar mass of a substance.

It is given that 2.5 mole of Ammonia is present

Grams of Ammonia present in 2.5 mole of Ammonia = ?

Molecular weight of Ammonia = 17 grams.

1 mole of Ammonia = 17 grams of Ammonia

2.5 mole of Ammonia = 17 * 2.5

= 42.5 grams

Therefore 42.5 grams of Ammonia is present in 2.5 mole of Ammonia.

To know more about Mole

https://brainly.com/question/26416088

#SPJ1

Considering the reaction's stoichiometry and the notion of molarity, 1.167 grams of solid barium sulfate form when 32.0 mL of 0.160 M barium chloride reacts with 70.0 mL of 0.065 M sodium sulfate.

The balanced reaction is:

BaCl₂(aq) + Na₂SO₄(aq) → BaSO₄(s) + 2 NaCl(aq)

The reactant that is consumed first in a chemical reaction is the limiting reagent because it stops any more reactions from taking place. The limiting reagent controls how much product is produced during the reaction.

Utilizing the reaction stoichiometry and the estimated number of moles, it is possible to identify the limiting reagent.

According to reaction stoichiometry, which describes the proportions of reagents and products in a chemical reaction, the following numbers of moles of each component are involved in the reaction:

Molarity, on the other hand, refers to how many moles of solute are dissolved in a certain volume.

Molarity is determined by the expression:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units[tex]\frac{moles}{L}[/tex].

In this case, 32.0 mL= 0.032L (being 1000 mL= 1 L) of barium chloride reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]0.160 M=\frac{No. of moles of solute}{0.032L}[/tex]

No of moles of barium chloride(solute) = 0.160M × 0.032L

No of moles of barium chloride(solute) = 0.00512moles

On the other side,70.0mL= 0.070 L of 0.065 M sodium sulfate reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]0.065 M =\frac{No of moles of solute}{0.070L}[/tex]

No of moles of Sodium sulfate= 0.065M × 0.070L

No of moles of Sodium sulfate = 0.0045moles

if by stoichiometry 1 mole of barium chloride reacts with 1 mole of sodium sulfate, 0.00512moles of barium sulfate reacts with how many moles of sodium sulfate?

No. of moles of sodium sulfate=

[tex]\frac{ 0.00512moles of barium sulfate * 1 mole of sodium sulfate}{1 mole of barium chloride}[/tex]

amount of moles of sodium sulfate= 0.00512 moles

But 0.00512moles of sodium sulfate are not available, 0.0045moles  moles are available. Since you have fewer moles than you need to react with  0.00512moles of barium chloride, sodium sulfate will be the limiting reagent.

Then, it is possible to determine the number of moles of barium sulfate produced by another rule of three: if by stoichiometry 1 mole of sodium sulfate produces 1 mole of barium sulfate, 0.00512 moles of sodium sulfate produces how many moles of barium sulfate?

[tex]Amt of mole of barium sulfate=\frac{0.00512 moles of sodium sulfate* 1mole of barium sulfate}{1 mole of sodium sulfate}[/tex]

amount of moles of barium sulfate=  0

Being the mass molar of barium sulfate is 233.34 g/mole, the mass-produced of the compound is calculated as:

                              = [tex]\frac{0.00512 moles * 233.34 gm}{1 mole}[/tex]

                              =1.167 gm

Hence, 1.167 gm of solid barium sulfate is formed.

To know more about stoichiometry refer to:-https://brainly.com/question/14935523

#SPJ10

Answer:

A real gas will act as an ideal gas under high temperature and at a low pressure.

Real gases are non-ideal gases whose molecules occupy space and have interactions, consequently, they do not adhere to the ideal gas law.

An ideal gas has molecules that occupy negligible space and have no interactions, and which consequently obeys the gas laws exactly.

Explanation:

Answer:

The oxygen atom in water has a negative charge.

Polar molecule: A molecule in which the centroid of the positive charges is different from the centroid of the negative charges.

Oxygen: A colorless, odorless, gaseous element constituting about one-fifth of the volume of the atmosphere and present in a combined state in nature. It is the supporter of combustion in air and was the standard of atomic, combining, and molecular weights until 1961, when carbon 12 became the new standard. Symbol: O; atomic weight: 15.9994; atomic number: 8; density: 1.4290 g/l at 0°C and 760mm pressure.

Water: A transparent, odorless, tasteless liquid, a compound of hydrogen and oxygen, H2O, freezing at 32°F or 0°C and boiling at 212°F or 100°C. that in more or less impure state constitutes rain, oceans, lakes, rivers, etc.: it contains 11.188 percent hydrogen and 88.812 percent oxygen, by weight.

Hydrogen: A colorless, odorless, flammable gas that combines chemically with oxygen to form water: the lightest of the known element. Symbol: H; atomic weight: 1.00797; atomic number: 1; density: 0.0899 g/l at 0°C and 760 mm pressure.

Atom: Am atom is the smallest constituent particle of a chemical element which has the properties of that element. They re comprised of at least an electron and a portion, as is the case for Hydrogen. Atoms of all other elements however, contain at least one neutron.

Proton: A positively charged elementary particle that is a fundamental constituent of all atomic nuclei. It is the lightest and most stable baryon, having a charge equal in magnitude to that of the electron, a spin of 1/2, and a mass of 1.673 × 10-27kg. Symbol: P.

Electron: An elementary particle that is a fundamental constituent of matter, having a negative charge of 1.602 × 10-19 coulombs, ha mass of 9.108 × 10-31 kilograms, and spin of 1/23, and existing independently or as the component outside the nucleus of an atom.

Neutron: An elementary particle having no charge, mass slightly greater than that of a proton, and spin of 1/2: a constituent of the nuclei of all atoms except those of hydrogen. Symbol: n.

A object has a negative charge when it consists of more electrons than protons.

With a partial positive charge on 2 Hs and a partial negative charge on oxygen, water molecules are polar molecules.

Actually, two hydrogen atoms and the core oxygen atom of water are covalently connected. Due to its greater electronegative nature than hydrogen, oxygen pulls the bound electron pair in the middle of the atom toward it.

When illustrating higher electron densities over oxygen, partial negative charge is used, whereas partial positive charge is used to illustrate lower densities over hydrogen atoms.

#SPJ2

Question 1

1) The formula of iron(II) iodide is [tex]\text{FeI}_{2}[/tex] and has a formula mass of 309.654 g/mol. This means that in 12.2 grams, there are

So, the molarity is (0.039398812868557)/(0.5) = 0.0788 M (to 3 sf)

2) In 0.039398812868557 mol of iron(II) iodide, there are 0.039398812868557 moles of iron(II) iodide cations, and thus the molarity is still 0.0788 M (to 3 sf)

3) In 0.039398812868557 mol of iron(II) iodide, there are

Thus, the molarity is (0.078797625737114)/(0.5) = 0.158 M (to 3 sf)

Question 2

1) The formula of iron(III) sulfate is [tex]\text{Fe}_{2}\text{(SO}_{4})_{3}[/tex] and has a formula mass of 399.9 g/mol. This means that in 16.8 grams, there are

So, the molarity is (0.042010502625656)/(0.25) = 0.168 M (to 3 sf)

2) In 0.042010502625656 moles of iron(III) sulfate, there are 2(0.042010502625656)=0.084021005251312 moles of iron(III) cations, so the molarity is:

3) In 0.042010502625656 moles of iron(III) sulfate, there are 3(0.042010502625656)=0.12603150787697 moles of sulfate anions, so the molarity is:

Question 3

Since we need 50.0 mL of solution at 0.271 M,

So, we need this from 12.0 M HBr so, meaning that:

Answer:

Tablets are made from salts of iron hence it does not look like iron.

Explanation:

Answer:

The answer for this problem would be "b. A 10 mL graduated cylinder".

Explanation:

The reason for this is because with a instrument that is closer to the value you're trying to measure, the more precise it will be.

For example using a teaspoon to measure something rather than a cup.

So mass of sulphur

[tex]\\ \rm\Rrightarrow 0.02\times 757\times 10^{6}[/tex]

[tex]\\ \rm\Rrightarrow 1514\times 10^4[/tex]

Moles =64/32=2

So

So tons of sulphur dioxide

[tex]\\ \rm\Rrightarrow 2(1516)10^4[/tex]

[tex]\\ \rm\Rrightarrow 3032\times 10^4ton[/tex]

Explanation:

2% of 2million tons of sulphur=

2÷100×7.57E9

That is;

[tex] \frac{2}{100} \times 7.57 \times 10 {}^{6} = 0.02 \times 7.57 \times 10 {}^{6} \\ = 2 \times 10 {}^{ - 2} \times7.57 \times 10 {}^{6} = 2 \times 7.57(10 {}^{ - 2 + 6}) \\ = 15.14 \times 10 {}^{4} (for \: sulphur) \\ for \: sulphur \: dioxide = so2 \\ the \: molar \: mass \: of \: so2 = 64g.mol {}^{ -1} \\ if \: 32grams \: of \: sulphur \: weighs \: 15.14 \times 10 {}^{4} tones \\ 64grams \: will \: weigh \: \frac{64}{32} \times 15.14 \times 10 {}^{4} \\ = 2 \times 15.14 \times 10 {}^{4} \\ = 30.28 \times 10 {}^{4} \\ or = 3.028 \times 10 {}^{5} tones[/tex]

Answer: B

Explanation:

Answer:exothermice

Explanation: it is relaeing heat not keeping  it in

Question 1

[tex]\text{pH}=-\log(\text{H}^{+})\\\\13=-\log(\text{H}^{+})\\ \\ \text{[H}^{+}]}=1 \times \boxed{10^{-13} \text{ moles per liter}} \\ \\ \text{[H}^{+}] \times \text{[OH}^{-}] =1 \times 10^{-14} \text{ M}\\\\\text{[OH}^{-}]=\boxed{1 \times 10^{-1} \text{ moles per liter}}[/tex]

Question 2

[tex]\text{pH}=-\log(\text{H}^{+})\\\\\text{pH}=-\log(1.0 \times 10^{-4})=\boxed{4}[/tex]

Avogadro's law states that in a mole of any substance, there are [tex]6.022 \times 10^{23}[/tex] atoms. This means that in the given sample, there are

[tex]\frac{6.075 \times 10^{26}}{6.022 \times 10^{23}}=1008.8010627 \text{ mol}[/tex]

So, the atomic mass of sulfur dioxide is

[tex]32.06+2(15.9994=64.0588 \text{ g/mol}[/tex]

Therefore, the mass is:

[tex](64.0588)(1008.8010627)=\boxed{64620 \text{ g (to 4 sf)}}[/tex]

The number of C atoms in 0.524 moles of C is 3.15 atoms.

The number of [tex]SO_2[/tex] molecules in 9.87 moles  [tex]SO_2[/tex] is 59.43 molecules.

The moles of Fe in 1.40 x [tex]10^{22}[/tex] atoms of Fe is 0.23 x [tex]10^{-1}[/tex]

The moles of [tex]C_2H_6O[/tex] in 2.30x[tex]10^{24}[/tex] molecules of [tex]C_2H_6O[/tex] is 3.81.

A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

A. The number of C atoms in 0.524 mole of C:

6.02214076 × [tex]10^{23}[/tex] x 0.524 mole

3.155601758 atoms =3.155 atoms

B. The number of [tex]SO_2[/tex] molecules in 9.87 moles of [tex]SO_2[/tex]:

6.02214076 × [tex]10^{23}[/tex] x 9.87

59.4385293 molecules= 59.43 molecules

C. The moles of Fe in 1.40 x [tex]10^{22}[/tex] atoms of Fe:

1.40 x [tex]10^{22}[/tex] ÷ 6.02214076 × [tex]10^{23}[/tex]

0.2324754694 x [tex]10^{-1}[/tex] moles.

0.23 x [tex]10^{-1}[/tex] moles.

D. The moles of [tex]C_2H_6O[/tex] in 2.30x[tex]10^{24}[/tex] molecules of [tex]C_2H_6O[/tex]:

2.30x[tex]10^{24}[/tex] ÷ 6.02214076 × [tex]10^{23}[/tex]

3.819239854 moles=3.81 moles

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

Answer:

Topographic maps generally shows Natural features such as Rivers and Lakes.

sometimes they also show some features made by humans like brodges, elevations etc.

Answer:

Topographic maps show contours, elevation, forest cover, marsh, pipelines, power transmission lines, buildings, and various types of boundary lines such as international, provincial, and administrative, and many others.

please give me brainliest

Answer:

A magic number is a number of nucleons (either protons or neutrons, individually) that form complete bands within the atomic nucleus. As a result, atomic nuclei with a magic number of protons or neutrons are significantly more persistent than other nuclei.

Answer:

For pH= 4.00 :

Add 0.1 ml of 0.1 molar NaOH to 50 ml of 0.1 molar potassium hydrogen phthalate .

Answer:

I am a small palm-sized pointing device

Answer:

2 Hg (g) + o2 ---> 2 H2o

equilibrium constant

K = (c) (d) / (a)(b)

K= ( H2o)²/(He) ²(o2)

Answer: The reaction requires breaking one O=O bond and two H-H bonds, and then forming four O-H bonds.

Answer:

The fifth answer choice (NH3 + H2O = NH4+ + OH-)

Explanation:

An acid-base reaction occurs when an acid and base combine, and the acid, (which is H2O in this case) "donates" a proton, or an H+ to the base. In this reaction, H2O gave one of its H+ to NH3, to make NH4+ and OH-. NH4+ now has a positive charge because it gained a positive ion, while OH- now has a negative charge because it gained a negative ion.