Answers
Answer:
48.27g Na
Explanation:
To start we need to balance the equation. The trick is to make sure both sides have equal amounts of each atom:
2Na + Cl2 --> 2NaCl
Now we can use sociometry
We have 75 g of Cl2, and for every 1 mole of Cl2, there are 70.9 grams:
[tex]75g Cl2 * \frac{1mole Cl2}{70.9g Cl2}= 1.05 mole Cl2[/tex]
Now we have moles of Cl2. To get to grams of Na, we need to first use mole to mole ratio:
[tex]1.05mole Cl2 *\frac{2 mole Na}{1 mole Cl2} =2.1 mole Na[/tex]
From here we convert moles of Na into grams of Na
[tex]2.1mol Na*\frac{22.99g Na}{1 mole Na} = 48.27g Na[/tex]
It's usually easier to just make one singular equation with all of these smaller equations.
[tex]75gNa*\frac{1molCl2}{70.9gCl2} *\frac{2mol Na}{1 mol Cl2} *\frac{22.99g Na}{1 mol Na}=48.27 gNa[/tex]
The trick to sociometry is making sure your units cancel out until you only have the unit you want. If there are moles of Na in the numerator, there needs to be moles of Na in the denominator. If there are grams of Cl2 in the numerator, there needs to be grams of Cl2 in the denominator and so one and so on
Related Questions
which acide will have more strength
out of two acids of pH
value 2
and 5 why
Answers
Ph 2 will ahve more strength due to the fact that its more acidic compared to pH 5.
the lower the number of a pH, the more it is heading towards being acidic, but the higher the number, the more it heads towards being an alkali. here is a ppt i made along time ago. hope it can help you . have a nice day
Name the following alkene compound
Answers
A boy sets up a picnic on the beach next to a sand dune. How are sand dunes formed?
A. erosion and deposition
B. weathering and erosion
C. tectonic plates
D. precipitation
Answers
Answer:
B. Weathering and Erosion
Explanation:
I majored in Chemistry
Answer:
b
Explanation:
Looking at the following equation, which is the correct order of coefficients?
NH3 + O2 --> NO + H2O
Answers
2NH3 + 302---> 2NO + 3H20
What is the formula for Decaoxygen pentasulfide
Answers
Answer:
Compound Formula. 1, Carbon dioxide, CO2. 2, Carbon monoxide, CO. 3, Diphosphorus pentoxide, P2O5. 4, Dinitrogen monoxide, N2O.
Explanation:
dont even know by thoAnswer:
Explanation:
An ideal gas that is confined in piston-cylinder assembly (i.e., closed system) goes from an initial state of 1 bar at 300 K to a final state of 3 bar at 300 K by the following two-step process.
Process Path.
(Step 1) Heating at constant volume, and then
( Step 2) Cooling by holding the pressure constant.
Required:
a. Determine the initial and final molar mass.
b. Illustrate the two paths on a pressure-volume diagram. Clearly label the initial and final states, process steps and the direction of each step in the diagram.
Answers
Answer:
Explanation:
From the given information;
Using ideal gas equation:
pV = nRT
when n = 1 mol
[tex]V = \dfrac{RT}{p}[/tex]
Initial molar volume = [tex]\dfrac{8.314 \ L.bar .k^{-1}.mol^{-1} \times 300 \ K}{1 \ bar}[/tex]
Initial molar volume = 2494.2 L.mol⁻¹
Final molar volume = [tex]\dfrac{8.314 \ L.bar .k^{-1}.mol^{-1} \times 300 \ K}{3 \ bar}[/tex]
Final molar volume = 831.4 L.mol⁻¹
7. A family used 1,438 kilowatt-hours (kwh) of electricity during the month of
October. Express this amount of energy in joules and Btu. See Appendix A.
Can you please show the steps thanks
Answers
Answer:
Im bad at math sorry
Explanation:
what is the relationship between temperature and kinetic energy?
Answers
Answer:
Temperature is directly proportional to the kinetic energy of the atoms that a body is made of. This relation is valid concerning the velocities relative to the center of mass of the body. In other words, concerted movements like translation and rotation do not affect temperature.
Explanation:
Answer:
As stated in the kinetic-molecular theory, the temperature of a substance is related to the average kinetic energy of the particles of that substance. When a substance is heated, some of the absorbed energy is stored within the particles, while some of the energy increases the motion of the particles.
I hope it's helpful!
What element does Ca-37 turn into when it gives off radiation?
K-37
K-39
Sc-37
Sc-45
Answers
In this type of decay, a proton is converted into a neutron, giving off a positron (an antielectron) in the process. In essence, the atomic number of the element is reduced by one. The element with the atomic number of Ca minus one is potassium (K); the mass number remains unchanged (37) since it is the sum of the protons and neutrons in the nucleus, which is the same before and after decay (a proton became a neutron, and the positron isn’t a nucleon).
A flexible container is filled with He(g) to a volume of V1 at a temperature of 150K. The container is then heated at constant pressure to a temperature of 300K. What is the final volume of the container?
a. V1/3b. V1/2c. V1d. 2V1
Answers
Answer:
a but it might also be c
Explanation:
i d k what this is
Answer:
2V1
Explanation:
Which of the following methods is least likely to help Alisha determine the age of sedimentary rock layers in her backyard?
A. Apply radiometric dating to determine the amount of radioactive isotopes in each rock layer.
B.Identify index fossils in sedimentary rock that have lived in a particular time in Earth’s history.
C. Analyze seismic diagrams to determine how radioactive elements break down into stable elements.
D. Use relative dating techniques to determine how individual fossil groups are related to specific rock layers.
ILL GIVE BRAINLIEST!11
Answers
Answer:
i put c
Explanation:
Rocks' ages are determined through radiometric dating, which takes into account the ratio of two different isotopes in a sample. Geologists can use tools like these to assess the age of a material,Mass spectrometer for thermal ionization Thus, option C is correct.
What determine the age of sedimentary rock layers?How rocks are structured in strata and how they fit into the larger geological history are the main topics of stratigraphic study. This approach is best suited for studying sedimentary rocks. Cross dating is a method for using fossils to determine a rock's relative age.
Therefore, Index fossils are sought after by geologists in geological strata. Index fossils are useful because they show the relative dates of the rock layers in which they are discovered. Since radioactive isotopes deteriorate with known time intervals.
Learn more about sedimentary rock here:
https://brainly.com/question/10709497
#SPJ6
I need help please my teaching is going to go crazy if I didn’t do it
Answers
Answer:
No One is going to answer all this because it hard to type it all in her. its easy to search it up
Explanation:
In the periodic table what is the 65th element? (pls help me)
Answers
Answer:
Terbium
Explanation:
All elements are put in squares on the periodic table. They represent the number of protons in the nucleus. They are the largest number in the square. The elements go up in order. Number 65 is in the row following Calcium. It is about in the middle of that row.You are given a sample of several compounds to separate by paper chromatography. You draw a pencil line exactly 1.00 cm from the bottom of the paper, and place a spot of sample on it. You dry the sample, then develop it in a solvent. When the chromatogram is taken out of the solvent, the paper is wet up to 9.2 cm from the bottom of the sheet. The compound you are interested in shows up as a spot 7.1 cm from the bottom of the paper. Calculate the following:
a. How far did the compound move?
b. In the same time, how far did the solvent move?
c. What is the Rf factor for the compound?
Answers
Answer:
a) 6.3 cm
b) 8.0 cm
c) 0.7875
Explanation:
(a) The compound has moved above upto 7.3 cm from the bottom of the paper. Let us assume that line is drawn at 1.0 cm mark as the origin of spot. \
Distance traversed by compound= 7.3 - 1.0 cm = 6.3 cm
(b) Distance traversed by the solvent = 9.0 - 1.0 cm = 8.0 cm
(c) The Rf = Compound Migration distance / Solvent front migration distance
= 6.3/8.0 = 0.7875
For case 1, what happens when an electron jumps from energy level 1 to energy level 3 in an atom?
Answers
Answer:
Case 1 (energy level): In an atom, an electron jumps from energy level 1 to energy level 3. ... The energy will increase.
Explanation:
What’s this answer help me out
Answers
A compound is 22.5% nitrogen and 77.5% oxygen, What is the empirical formula of
this compound?
Answers
Answer:
[tex]NO_3[/tex]
Explanation:
Hello!
In this case, since percent compositions are used to set up empirical formulas when assuming those percentages are masses, we can fist compute the moles of nitrogen and oxygen in the compound as shown below:
[tex]n_N=22.5g/14.01g/mol=1.61mol\\\\n_O=77.5g/16.00g/mol=4.84mol[/tex]
Now, we divide by the fewest moles to compute the subscripts:
[tex]N=\frac{1.61}{1.61} =1\\\\O=\frac{4.84}{1.61} =3[/tex]
Thus, the empirical formula turns out:
[tex]NO_3[/tex]
Best regards!
Dos Identy each statement whether TRUE or FALSE. Write you answer m
1. Mammals are warm blooded animals that are born alive.
2. Reptiles are cold blooded vertebrates that are hatched from egs.
3. Vertebrates have no economic importance to our environment.
4. There is a significant relationship between vertebrates
5. Invertebrate animals are important to human beings.
and invertebrates.
Answers
Answer:
1=true
2=false
3=false
4=true
5=true
Which of the following is the best example of water changing from a liquid to a gas?
A. clouds on a summer day
B. morning dew on orange trees
C. fog rising from a pond on a cold day
D. ice melting back to water when it is left out at room temperature
Answers
Answer:
c
Explanation:
hope this helps! ^-^
Answer:
C
Explanation:
It's the answer
A flask at room temperature contains exactly equal amounts (in moles) of nitrogen and xenon.
a. Which of the two gases exerts the greater partial pressure?
b. The molecules or atoms of which gas have the greater average velocity?
c. The molecules of which gas have the greater average kinetic energy?
d . If a small hole were opened in the flask, which gas effuses more quickly?
Answers
Answer:
a) Same
b) Nitrogen
c) Same
d) Nitrogen
Explanation:
a)
The formula for partial pressure of a gas is equal to
[tex]p_B = n_B \frac{RT}{V}[/tex]
Here nB is the number of moles .
The number of moles for both the gases are same and hence the partial pressure for the two gases will also be same.
b) The greater average velocity is calculated by using following formula
[tex]v_{RMS} = \sqrt{3RTM}[/tex]
Here M is the molar mass.
Molar mass of nitrogen is greater than the molar mass of xenon and hence nitrogen will have higher greater average velocity
c) As we know, the average kinetic energy of gas particles is dependent on the absolute temperature of gas and if all the gases are at same temperature, their kinetic energy will also be same. Since nitrogen and xenon are at same temperature, their kinetic energy will be same
d) Effusivity is depended directly on the thermal conductivity, density and and the specific heat capacity.
All these three parameters are higher in case of nitrogen. Thus, it will effuse first
If plant a, the parent plant, died from a new disease, what might happen to plant B?
Answers
What types of energy do lamps give off?
Include how was your day in you answer.
Explain why/if the lamp gives off heat energy.
Answers
Answer:
When a lamp is turned on, it gives off light energy and heat energy.
My day was fantastic.
Explanation:
The lamp gives off heat energy because anything that gives off light energy gives off heat energy.
A student dissolves 12.1 g of potassium chloride (KCl) in 250. g of water in a well-insulated open cup. He then observes the temperature of the water fall from 21.0 °C to 17.1 °C over the course of 6.9 minutes. Use this data, and any information you need from the ALEKS Data resource, to answer the questions below about this reaction:
KCl(s) → K (aq) + Cl (aq)
a. Is this reaction exothermic, endothermic, or neither?
b. Calculate the reaction enthalpy ΔH.rxn per mole of KCI.
Answers
Answer:
a. Endothermic
b. 26.37kJ/mol
Explanation:
a. As we can see, the temperature of the water is decreasing when the reaction is occurring, that means the reaction is absorbing heat and is endothermic
b. To find the enthalpy we must find the change in heat when 12.1g of KCl are dissolved. Using the equation:
Q = -m*ΔT*C
Where Q is change in heat
m the mass of solution (250g + 12.1g = 262.1g)
ΔT is change in heat (17.1°C - 21.0°C = -3.9°C)
And C is specific heat of the solution (4.184J/g°C assuming is the same than the specific heat of water).
Replacing:
Q = -262.1g*-3.9°C*4.184J/g°C
Q = 4277J = 4.28kJ
As reaction enthalpy is the change in heat per mole of reaction, we must find the moles of 12.1g of KCl:
Moles KCl -Molar mass: 74.55g/mol-:
12.1g KCl * (1 mol / 74.55g) = 0.1623 moles KCl
The reaction enthalpy us:
4.28kJ / 0.1623mol = }
26.37kJ/mol
The Gulf Stream flows along the equator before turning north along Florida’s east coast. How does the Gulf Stream impact Florida’s climate?
Answers
Answer:
The Gulf Stream is influential on the climate of the Florida peninsula.East winds moving over this warm water move warm air from over the Gulf Stream inland, helping to keep temperatures milder across the state than elsewhere across the Southeastern United States during the winter.
Explanation:
hope this helps!
Answer:
The Gulf Stream is influential on the climate of the Florida peninsula.East winds moving over this warm water move warm air from over the Gulf Stream inland, helping to keep temperatures milder across the state than elsewhere across the Southeastern United States during the winter.
Explanation:
Hope This Helps!
1. What is an ionic bond?
Answers
Ionic bonding is the complete transfer of valence electron(s) between atoms. It is a type of chemical bond that generates two oppositely charged ions. In ionic bonds, the metal loses electrons to become a positively charged cation, whereas the nonmetal accepts those electrons to become a negatively charged anion.
Explanation:
ionic bond is a bonding between a non-metal and a metal, that occurs when change atoms (ions) attract.
1. 1 N2+ 3 H2→2 NH3
c.How many moles of nitrogen are needed to produce 12 moles of nitrogen trihydride?
Answers
[tex]\displaystyle 6 \ mol \ N_2[/tex]
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to RightChemistry
Atomic Structure
Writing CompoundsStoichiometry
Using Dimensional AnalysisReactions RxNExplanation:Step 1: Define
[RxN - Balanced] N₂ + 3H₂ → 2NH₃
[Given] 12 mol NH₃
[Solve] x mol N₂
Step 2: Identify Conversions
[RxN] 1 mol N₂ → 2 mol NH₃
Step 3: Stoich
[DA] Set up: [tex]\displaystyle 12 \ mol \ NH_3(\frac{1 \ mol \ N_2}{2 \ mol \ NH_3})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 6 \ mol \ N_2[/tex]Answer:
[tex]\boxed {\boxed {\sf 6 \ moles \ of \ N_2}}[/tex]
Explanation:
1. Balance Equation
We are given the reaction:
[tex]1 N_2+3H_2 \rightarrow 2 NH_3[/tex]
The equation is already balanced. Both sides have 2 moles of nitrogen and 6 moles of hydrogen.
2. Conversions
In this reaction, 1 mole of nitrogen produces 2 moles of nitrogen tryhdride:
[tex]1 \ mol \ N_2 \rightarrow 2 \ mol \ NH_3[/tex]
3. Stoichiometry Calculations
Use the conversion rate as a fraction.
[tex]\frac{ 1 \ mol \ N_2}{2 \ mol \ NH_3}[/tex]
Multiply the number of moles of nitrogen trihydride produced: 12 moles.
[tex]12 \ mol \ NH_3 *\frac{ 1 \ mol \ N_2}{2 \ mol \ NH_3}[/tex]
The moles of nitrogen trihydride cancel.
[tex]12 *\frac{ 1 \ mol \ N_2}{2} = \frac{ 12 \ mol \ N_2}{2}[/tex]
[tex]6 \ mol \ N_2[/tex]
6 moles of nitrogen are needed to produce 12 moles of nitrogen trihydride.
Which term names an icy object that orbits the sun and has a tail?
meteorite
comet
meteor
asteroid
Answers
Answer:
Comets are small, icy objects that have very elliptical orbits. When they are close to the Sun, they form comas and tails, which glow and make the comet more visible.
Explanation:
Hope This Helps!!
(brainliest please, if possible)
Answer:
comet's
Explanation:
what the other user said
What is the formula for Triphosphorous nonaoxide
Answers
In an experiment, 20cm^3 of 0.2dm^3 NaOH reacted with 32.0cm^3 of H2SO4 solution. Calculate the concentration of the H2SO4 in a) mol dm^-3 and b) g dm^-3
Answers
Answer:
A. 0.0625 moldm¯³
B. 6.125 gdm¯³
Explanation:
We'll begin by writing the balanced equation balance equation for the reaction. This is illustrated below:
2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂SO₄ (nₐ) = 1
The mole ratio of the base, NaOH (n₆) = 2
A. Determination of the concentration of the acid in moldm¯³.
Volume of base, NaOH (V₆) = 20 cm³
Concentration of base, NaOH (C₆) = 0.2 moldm¯³
Volume of acid, H₂SO₄ (Vₐ) = 32 cm³
The mole ratio of the acid, H₂SO₄ (nₐ) = 1
The mole ratio of the base, NaOH (n₆) = 2
Concentration of acid, H₂SO₄ (Cₐ) =?
CₐVₐ / C₆V₆ = nₐ / n₆
Cₐ × 32 / 0.2 × 20 = 1 / 2
Cₐ × 32 / 4 = 1 / 2
Cross multiply
Cₐ × 32 × 2 = 4 × 1
Cₐ × 64 = 4
Divide both side by 64
Cₐ = 4 / 64
Cₐ = 0.0625 moldm¯³
Therefore, concentration of the acid in moldm¯³ is 0.0625 moldm¯³
B. Determination of the concentration of the acid in gdm¯³.
Concentration (moldm¯³) = 0.0625 moldm¯³
Concentration (gdm¯³) =?
Next, we shall determine the molar mass of the acid, H₂SO₄. This can be obtained as follow:
Molar mass of H₂SO₄ = (2×1) + 32 + (4×16)
= 2 + 32 + 98
= 98 g/mol
Finally, we shall determine the concentration of the acid in gdm¯³. This can be obtained as follow:
Concentration (moldm¯³) = 0.0625 moldm¯³
Molar mass of H₂SO₄ = 98 g/mol
Concentration (gdm¯³) =?
Conc. (moldm¯³) = conc. (gdm¯³) / Molar mass
0.0625 = Conc. (gdm¯³) / 98
Cross multiply
Conc. (gdm¯³) = 0.0625 × 98
Conc. (gdm¯³) = 6.125 gdm¯³
Thus, the concentration of the acid in gdm¯³ is 6.125 gdm¯³
What would be the structural formula for sodium fluoride? (NaF)
Answers
Answer:
Formula and structure: The chemical formula of sodium fluoride is NaF and its molar mass is 41.99 g/mol. It is a simple ionic compound, made of the sodium (Na +) cation and fluoride (F -) anion. The solid salt exists as cubic crystals similar to the crystal structure of sodium chloride (NaCl).
Explanation:
