PLEASE ANSWER QUICKLY !!!! thank you and will give brainliest if correct!

The result of the subtraction is 4.234 x 10⁻³.

What is the arithmetic operation?

The four fundamental operations of arithmetic are addition, subtraction, multiplication, and division of two or more quantities. Included in them is the study of numbers, especially the order of operations, which is important for all other areas of mathematics, including algebra, data management, and geometry. The rules of arithmetic operations are required in order to answer the problem.

When we subtract two numbers written in scientific notation, we first make sure they have the same exponent. In this case, we need to rewrite 1.6 x 10⁻² as 0.016 x 10⁻³ so that we can subtract it from 4.25 x 10⁻³:

4.25 x 10⁻³ - 0.016 x 10⁻³ = (4.25 - 0.016) x 10⁻³

Simplifying the expression inside the parentheses gives:

4.234 x 10⁻³

So the result of the subtraction is 4.234 x 10⁻³.

Learn more about arithmetic, by the following link.

https://brainly.com/question/13181427

#SPJ1

The required solution to the given word problem is that the temperature drops by 13.5 degrees ( rounded up to the nearest tenth) at 26 feet below the sea level.

Cher is doing research of the temperature of the ocean below the surface.

The given word problem can be solved as,

It is given that for every 3.25 feet below sea level, the temperature reads 1.7 degrees cooler.

That is, for 3.25 feet below sea level = -1.7 degrees

Therefore, for 1 foot below sea level = -(1.7/ 3.25) degrees

= - 0.52 degrees (approximated to two decimal places)

Thus the the drop (-) in temperature at 26 feet below the sea level is by

= (0.52) (26) degrees

= 13.52 degrees

= 13.5 degrees ( rounded up to the nearest tenth) is the required temperature of the given problem.

To know more about temperature:

https://brainly.com/question/11464844

#SPJ1

In the given case of a graph with 10,000 vertices and 20,000 edges, it is advisable to use the adjacency list structure. The reason for this choice is to save space, as the adjacency list structure requires less space for sparse graphs compared to the adjacency matrix structure.

The adjacency list represents only the existing edges, leading to more efficient use of memory in this scenario. For a graph with 10,000 vertices and 20,000 edges, the adjacency list structure would be the better choice. This is because the adjacency matrix structure requires O(n^2) space complexity, where n is the number of vertices. In this case, that would mean using 100 million bits of memory. On the other hand, the adjacency list structure only requires O(n+m) space complexity, where m is the number of edges. Since m is much smaller than n^2 in this case, using the adjacency list structure would result in much less space usage.

Learn more about Matrix here: brainly.com/question/29132693

#SPJ11

This implementation uses the bisect_left function from the bisect module to find the index of the closest x value to x_new. It then uses a while loop to find the k-nearest neighbors, starting with the closest neighbor(s) and alternating between the left and right neighbors until k neighbors have been found. Finally, it returns the average of the k-nearest neighbors.

Here's one way to implement the knn_predict function in Python

def knn_predict(data, x_new, k):

   # find the index of the closest x value to x_new

   idx = bisect_left(data[0], x_new)

   # determine the k-nearest neighbors

   neighbors = []

   i = idx - 1  # start with the left neighbor

   j = idx      # start with the right neighbor

   while len(neighbors) < k:

       if i < 0:  # ran out of left neighbors, use right neighbors

           neighbors.extend(data[1][j:j+k-len(neighbors)])

           break

       elif j >= len(data[0]):  # ran out of right neighbors, use left neighbors

           neighbors.extend(data[1][i-(k-len(neighbors))+1:i+1])

           break

       elif x_new - data[0][i] < data[0][j] - x_new:  # choose left neighbor

           neighbors.append(data[1][i])

           i -= 1

       else:  # choose right neighbor

           neighbors.append(data[1][j])

           j += 1

   # return the average of the k-nearest neighbors

   return sum(neighbors) / len(neighbors)

This implementation uses the bisect_left function from the bisect module to find the index of the closest x value to x_new. It then uses a while loop to find the k-nearest neighbors, starting with the closest neighbor(s) and alternating between the left and right neighbors until k neighbors have been found. Finally, it returns the average of the k-nearest neighbors.

Learn more about Python,

https://brainly.com/question/30427047

#SPJ4

The answer to part a is: p-value = 0.0918. We do not reject the null hypothesis.

To calculate the p-value for a one-tail (lower) test with a z-score of -1.34 and a significance level of α=0.05, we need to find the probability of getting a z-score less than or equal to -1.34 under the null hypothesis.
Using a standard normal distribution table or calculator, we can find that the area to the left of -1.34 is 0.0918. This is the probability of obtaining a z-score less than or equal to -1.34.
To find the p-value, we compare this probability to the significance level. Since the p-value (0.0918) is greater than the significance level (0.05), we do not reject the null hypothesis.

Learn more about standard normal distribution here:

https://brainly.com/question/31379967

#SPJ11

(a) Let X be the weight of coal loaded into a car. We want to find the value of K such that P(X > K) = 0.97. From the normal distribution table, we know that the area to the right of the mean (75 tons) is 0.5. Therefore, we need to find the z-score corresponding to an area of 0.47 to the right of the mean:

z = invNorm(0.47) ≈ 1.88

We can use the formula z = (K - μ) / σ, where μ = 75 and σ = 0.8, to solve for K:

K = zσ + μ = 1.88(0.8) + 75 ≈ 76.5

Therefore, the value of K is approximately 76.5 tons.

(b) We want to find P(X < 74.4) for a single car. Using the z-score formula, we have:

z = (74.4 - 75) / 0.8 ≈ -0.75

From the normal distribution table, the area to the left of a z-score of -0.75 is about 0.2266. Therefore, the probability that a single car will have less than 74.4 tons of coal is approximately 0.2266.

(c) Let Y be the number of cars out of 20 that will have less than 74.4 tons of coal. Since each car is loaded independently of the others, Y follows a binomial distribution with n = 20 and p = 0.2266. We want to find P(Y > 2). Using the binomial distribution formula or a calculator, we have:

P(Y > 2) = 1 - P(Y ≤ 2) ≈ 0.902

Therefore, the probability that more than 2 out of 20 cars will be loaded with less than 74.4 tons of coal is approximately 0.902.

(d) The expected number of cars out of 20 that will have less than 74.4 tons of coal is:

E(Y) = np = 20(0.2266) ≈ 4.53

Therefore, most likely, there will be either 4 or 5 cars out of 20 loaded with less than 74.4 tons of coal. We can find the probability of this happening by adding the probabilities of getting 4 or 5 successes in 20 trials using the binomial distribution formula or a calculator:

P(Y = 4 or Y = 5) ≈ 0.608

Therefore, the probability of having either 4 or 5 cars out of 20 loaded with less than 74.4 tons of coal is approximately 0.608.

(e) The probability of a car being loaded with less than 74.4 tons of coal is about 0.2266, which is quite high. To reduce this probability, we should increase the average loading of coal from 75 tons to a new level, M tons. This is because increasing the average loading will shift the distribution to the right, resulting in fewer cars being loaded with less than 74.4 tons of coal. Therefore, our suggestion is that the new level M should be higher than 75 tons.

Learn more about binomial distribution here:

https://brainly.com/question/27801132

#SPJ11

The shortest distance from Q to the plane is [tex]\sqrt{(11/2)}[/tex], and it occurs at the point (3/2, -1/2, 0) on the plane.

Let P be the point on the plane x + y + z = 1 that is closest to the point Q=(2,0,-3).

We can use the fact that the vector from Q to P is perpendicular to the plane.

Therefore, we can find the normal vector to the plane, and use it to set up an equation for the line passing through Q and perpendicular to the plane.

The intersection of this line with the plane will give us the point P.

First, we find the normal vector to the plane:

N = <1,1,1>

Next, we find the vector from Q to P, which we will call d:

d = <x-2, y, z+3>

Since d is perpendicular to N, their dot product must be zero:

N · d = 0

Substituting in the expressions for N and d, we get:

1(x-2) + 1(y) + 1(z+3) = 0

Simplifying this equation, we get:

x + y + z = 2

This is the equation of the line passing through Q and perpendicular to the plane.

To find the intersection of this line with the plane, we substitute the equation for the line into the equation for the plane:

x + y + z = 2

x + y + (1-x-y) = 2

Simplifying this equation, we get:

z = 1-x-y

Substituting this expression for z back into the equation for the line, we get:

x + y + (1-x-y) = 2

Simplifying, we get:

x = 3/2

y = -1/2

Substituting these values for x and y back into the expression for z, we get:

z = 0

Therefore, the point P on the plane closest to Q is (3/2, -1/2, 0).

To find the distance from Q to P, we calculate the length of the vector from Q to P:

d = <3/2 - 2, -1/2 - 0, 0 - (-3)> = <-1/2, -1/2, 3>

[tex]|d| = \sqrt{((-1/2)^2 + (-1/2)^2 + 3^2) }[/tex]

[tex]=\sqrt{(11/2).[/tex]

For similar question on distance.

https://brainly.com/question/29409777

#SPJ11

The second derivative of f(x) = (3x² - 5x) is f''(x) = 6. Therefore, f''(1) = 6.

This means that the rate of change of the slope of the function at x=1 is constant and equal to 6.

To find the second derivative of a function, we differentiate the function once and then differentiate the result again. In this case, f'(x) = (6x - 5), and differentiating again gives f''(x) = 6.

The value of f''(1) tells us about the concavity of the function at x=1. Since f''(1) = 6, the function is concave upwards at x=1, meaning that the slope is increasing. This information is useful in analyzing the behavior of the function around the point x=1.

To know more about second derivative click on below link:

https://brainly.com/question/29090070#

#SPJ11

It will take approximately 14.6 years to triple and 19.5 years to quadruple.

To solve this problem, we can use the formula for exponential growth, which is:

P(t) = P0 [tex]e^k^t[/tex]

Where P(t) is the population at time t, P0 is the initial population, k is the constant of proportionality, and e is the mathematical constant approximately equal to 2.71828.

Since the population is doubling in 7 years, we know that:

2P0 = P0 [tex]e^k^7[/tex]

Simplifying this equation, we can cancel out P0 on both sides and take the natural logarithm of each side:

ln(2) = 7k

Solving for k, we get:

k = ln(2)/7

Now, to find out how long it will take for the population to triple or quadruple, we just need to plug in the appropriate values of P0 and solve for t.

For tripling:

3P0 = P0  [tex]e^k^t[/tex]

ln(3) = kt

t = ln(3)/k ≈ 14.6 years

For quadrupling:

4P0 = P0  [tex]e^k^t[/tex]

ln(4) = kt

t = ln(4)/k ≈ 19.5 years

This problem involves exponential growth, which is a type of growth where the rate of growth is proportional to the current amount. In this case, the population is growing at a rate proportional to the number of people present at time t.

To solve this problem, we need to use the formula for exponential growth, which relates the population at time t to the initial population and the constant of proportionality.

Using the fact that the population has doubled in 7 years, we can find the value of the constant of proportionality, which allows us to calculate the time it will take for the population to triple or quadruple.

To know more about natural logarithm click on below link:

https://brainly.com/question/30085872#

#SPJ11

The area of the page is maximized when the width (x) is 14 inches and the length (y) is 7 inches.

By multiplying the length and width of the rectangle, the measurement of the amount of space contained within is known as the rectangle area.

According to the question, the area of the page = width (x) × length (y)

⇒ xy = 98 in²

By subtracting the width (x) of the page to the top and bottom margins (1 inch each), the width of the printable area can be determined;

⇒  [tex]x-1-1[/tex]  =   (x - 2)

The length (y) of the printable area is determined by subtracting the length of the page by the sum of the left and right margins;

⇒  [tex]y-\frac{1}{2} -\frac{1}{2}[/tex]   =  (y - 1)

So, the printable area = A = (x - 2)  (y - 1)

⇒ A = xy - 2y - x + 2

⇒ A = 98 - 2y - x + 2           (given xy = 98 in²)

⇒ A = 100 - 2y - x  

⇒ A =  [tex]100 -2*(\frac{98}{x})-x[/tex]        (also, y = 98/x)

⇒ A =  [tex]100 - (\frac{196}{x})-x[/tex]  

Now we can find the maximum of A by taking its derivative with respect to one of the variables (x or y), setting it equal to zero, and solving for that variable. Let's take the derivative with respect to x:

⇒ [tex]\frac{dA}{dx} = 0 - 196*(\frac{-1}{x^2} )-1[/tex]

⇒ [tex]\frac{dA}{dx} = \frac{196}{x^2} -1[/tex]

For maximize area A, we need  [tex]\frac{dA}{dx} = 0[/tex] ;

⇒ [tex]\frac{196}{x^2} -1 =0[/tex]

⇒ [tex]\frac{196}{x^2} = 1[/tex]

⇒ x = √196 = 14 inches.

Now substitute x = 14 into the expression for xy = 98;

y = 98/x  = 98/14 = 7

y = 7 inches.

Therefore, the area of the page is maximized when the width (x) is 14 inches and the length (y) is 7 inches.

To know more about rectangle, visit:
https://brainly.com/question/2607596
#SPJ1

Suppose ∫ 1 until 7 f(x)dx = 2 ∫ 1 until 3 f(x) dx = 5, ∫ 5 until 7 f(x) dx = 8 ∫3 until 5 f(x) dx = _8_ ∫5 until 3 (2f(x)-5) dx = _11___

We can use the properties of definite integrals to find the missing values.

First, we know that the integral of a function over an interval is equal to the negative of the integral of the same function over the same interval in reverse order.

So,

∫ 5 until 3 f(x) dx = - ∫ 3 until 5 f(x) dx

We can substitute the given value for ∫ 5 until 7 f(x) dx and ∫ 3 until 5 f(x) dx to get:

∫ 3 until 5 f(x) dx = -[ ∫ 5 until 7 f(x) dx - ∫ 3 until 7 f(x) dx ]

∫ 3 until 5 f(x) dx = -[ 8 - ∫ 1 until 7 f(x) dx ]

∫ 3 until 5 f(x) dx = -[ 8 - 5 ]

∫ 3 until 5 f(x) dx = -3

Therefore, ∫ 3 until 5 f(x) dx = 3.

Next, we can use the linearity property of integrals, which states that the integral of a sum of functions is equal to the sum of the integrals of each function.

So,

∫ 5 until 3 (2f(x) - 5) dx = 2 ∫ 5 until 3 f(x) dx - 5 ∫ 5 until 3 dx

We can substitute the value we found for ∫ 3 until 5 f(x) dx and evaluate the definite integral ∫ 5 until 3 dx as follows:

Suppose ∫ 5 until 3 (2f(x) - 5) dx = 2(3) - 5(-2)

∫ 5 until 3 (2f(x) - 5) dx = 11

Therefore, ∫ 5 until 3 (2f(x) - 5) dx = 11.

For similar question on integral.

https://brainly.com/question/20156869

#SPJ11

Both main effects and the interaction were tested. The results of the study could provide insights into how job commitment and training impact job performance, both individually and in combination.

To analyze the relationship between job commitment, training, and job performance in this study, you should perform a two-way ANOVA. Here are the steps to do so:

Step 1: Identify the variables
- Dependent variable: Job performance (mean performance ratings)
- Independent variables: Job commitment and training

Step 2: Set up the data
- Since there are 10 participants in each condition (cell), you should have a matrix with the job performance data organized by the levels of job commitment and training.

Step 3: Perform a two-way ANOVA
- This analysis will allow you to test the main effects of job commitment and training on job performance, as well as their interaction effect.

Step 4: Interpret the results
- Examine the p-values for the main effects of job commitment and training, as well as their interaction. If the p-value is less than the significance level (usually 0.05), you can conclude that there is a significant effect.

Learn more about variables here:

https://brainly.com/question/29583350

#SPJ11

The maximum possible correlation between two variables X and Y is determined by the degree of variability in each variable, as indicated by their standard deviations, and the degree of association between them, as indicated by the strength of their linear relationship.

The two factors that determine the maximum possible correlation between two variables X and Y are the standard deviations of X and Y, and the degree of the linear relationship between them.

The degree of the linear relationship between the variables refers to how closely the data points follow a straight line when plotted on a scatterplot.

The closer the points are to a straight line, the stronger the linear relationship and the higher the correlation coefficient will be. If the data points are scattered randomly with no clear linear pattern, the correlation coefficient will be close to zero.

Therefore, it is important to use caution when interpreting correlation results and to consider other sources of evidence before drawing any conclusions about causality.

for such more questions on correlation coefficient

https://brainly.com/question/30628772

#SPJ11

The probability of getting 14 successes out of 20 trials is approximately 0.0265 or 2.65% (rounded to 4 decimal places).

Given:
n (number of trials) = 20
k (number of successes) = 14
q (probability of failure) = 0.25

Since q is the probability of failure, the probability of success p can be calculated as:
p = 1 - q = 1 - 0.25 = 0.75

Now we can find the probability P(X = k) using the binomial distribution formula:

P(X = k) = [tex]C(n, k) * p^k * q^(n-k)[/tex]

First, calculate the binomial coefficient C(n, k):
C(20, 14) = 20! / (14! * (20-14)!) = 38760

Next, calculate p^k and q^(n-k):
[tex]p^k = 0.75^(14)[/tex] ≈ 0.00282
[tex]q^(n-k) = 0.25^6[/tex]≈ 0.000244

Finally, combine these values to find P(X = k):

P(X = k) = 38760 * 0.00282 * 0.000244 ≈ 0.0265

So, the probability of getting 14 successes out of 20 trials is approximately 0.0265 or 2.65% (rounded to 4 decimal places).

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ11

Answer:

3. 75

Step-by-step explanation:

The distribution of the amount of coffee people drink per day is N(14, 7^2). The probability that one person drinks between 13.8 and 14.4 oz is 0.0248. For 32 people, the probability of the average coffee consumption being between 13.8 and 14.4 oz is 0.8913. The IQR for the average of 32 coffee drinkers is approximately 1.4442 oz.

The amount of coffee that people drink per day is normally distributed with a mean of 14 ounces and a standard deviation of 7 ounces.

X ~ N(14, 7²)

¯xx¯ ~ N(14, 7/√(32)²) = N(14, 1.237²)

Using the standard normal distribution, we can calculate the z-scores for these values

z1 = (13.8 - 14)/7 = -0.0571

z2 = (14.4 - 14)/7 = 0.0571

Then, we can use the z-table or calculator to find the probability

P(13.8 < X < 14.4) = P(-0.0571 < Z < 0.0571) = 0.0248 (rounded to 4 decimal places)

For the 32 people, find the probability that the average coffee consumption is between 13.8 and 14.4 ounces of coffee per day.

Using the central limit theorem, the distribution of sample means follows a normal distribution with mean = population mean = 14 and standard deviation = population standard deviation / sqrt(sample size) = 7 / sqrt(32) ≈ 1.237.

So, we can calculate the z-scores for the sample mean

z1 = (13.8 - 14) / (7 / √(32)) = -1.6325

z2 = (14.4 - 14) / (7 / √(32)) = 1.6325

Then, we can use the z-table or calculator to find the probability

P(13.8 < ¯xx¯ < 14.4) = P(-1.6325 < Z < 1.6325) = 0.8913 (rounded to 4 decimal places)

The IQR (interquartile range) can be calculated as Q3 - Q1, where Q1 and Q3 are the 25th and 75th percentiles of the distribution, respectively.

Since we know that the distribution of sample means follows a normal distribution with mean 14 and standard deviation 7 / √(32), we can use the z-score formula to find the values of Q1 and Q3 in terms of z-scores

z_Q1 = invNorm(0.25) ≈ -0.6745

z_Q3 = invNorm(0.75) ≈ 0.6745

Then, we can solve for the values of Q1 and Q3:

Q1 = 14 + z_Q1 * (7 / √(32)) ≈ 13.2779

Q3 = 14 + z_Q3 * (7 / √(32)) ≈ 14.7221

So, the IQR is Q3 - Q1 ≈ 1.4442 (rounded to 4 decimal places).

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

The probability of the following are

a) The employee is a stock clerk or married is 17/89

b) The employee is a stock clerk given that he is married is 8/19

c) The employee is not single given that she/he is a cashier or a deli personnel is 14/47

d)) The value of PI( MD) ( EN) is 8/89

e) The employee is net divorced given that she/he is not a stock clerk is 19/50

a) The first question asks us to find the probability that an employee is a stock clerk or married. To do this, we need to add the number of stock clerks and the number of married employees and subtract the number of employees that are both stock clerks and married, since we do not want to count them twice. Thus, the probability of selecting an employee who is either a stock clerk or married is:

P(stock clerk or married) = (11+8-2)/89 = 17/89

b) The second question asks us to find the probability of selecting a stock clerk given that the employee is married. This is an example of a conditional probability, which is the probability of an event given that another event has occurred. To calculate this probability, we need to divide the number of married stock clerks by the total number of married employees:

P(stock clerk | married) = 8/19

c) The third question asks us to find the probability that an employee is not single given that he or she is a cashier or a deli personnel. This is another example of a conditional probability. To calculate this probability, we need to find the number of employees who are cashiers or deli personnel but not single, and divide this by the total number of cashiers and deli personnel:

P(not single | cashier or deli) = (8+2+4)/47 = 14/47

d) The fourth question asks us to find the joint probability of an employee being either married and divorced, or employed as delivery personnel and security personnel. We can calculate this probability by adding the number of employees in the two categories and dividing by the total number of employees:

P(MD or EN) = (5+3)/89 = 8/89

e) The fifth question asks us to find the probability of an employee not being divorced given that he or she is not a stock clerk. We can find this probability by subtracting the number of non-divorced employees who are stock clerks from the total number of non-stock clerk employees, and dividing by the total number of non-stock clerk employees:

P(not divorced | not stock clerk) = (12+1+2+4)/50 = 19/50

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

The periodic payment needed for the sinking fund to accumulate $2,400,000 in 25 years at an interest rate of 8.1% compounded semiannually is $29,917.68.

To find the periodic payment for each sinking fund, we can use the formula:

PMT = PV * (r/2) / (1 - (1 + r/2)^(-n*2))

Where PV is the present value, r is the interest rate (compounded semiannually), n is the number of periods (in this case, 25 years or 50 semiannual periods), and PMT is the periodic payment.

Plugging in the values given, we get:

PMT = 2,400,000 * (0.081/2) / (1 - (1 + 0.081/2)^(-50))
PMT = $29,917.68

Therefore, the periodic payment needed for the sinking fund to accumulate $2,400,000 in 25 years at an interest rate of 8.1% compounded semiannually is $29,917.68.
To find the periodic payment for the sinking fund, we can use the sinking fund formula:

PMT = PV * (r/n) / [(1 + r/n)^(nt) - 1]

where PMT is the periodic payment, PV is the present value, r is the interest rate, n is the number of compounding periods per year, and t is the number of years.

In this case, PV = $2,400,000, r = 8.1% = 0.081, n = 2 (compounded semiannually), and t = 25 years. Plugging these values into the formula, we get:

PMT = 2,400,000 * (0.081/2) / [(1 + 0.081/2)^(2*25) - 1]

Now, compute the values:

PMT = 2,400,000 * 0.0405 / [(1.0405)^50 - 1]

PMT = 97,200 / [7.3069 - 1]

PMT = 97,200 / 6.3069

PMT ≈ 15,401.51

So, the periodic payment needed for the sinking fund is approximately $15,401.51.

To learn more about rate, click here:

brainly.com/question/29781084

#SPJ11

Answer:

d

Step-by-step explanation:

There are  2^3 = 8 possible outcomes

  only these three have ONE heads    H T T        T H T    and  T T H

3 out of 8   = 3/8

The mean outcome of this experiment with outcomes ranging from 50 to 70 using a uniform random variable is 60.
Step 1: Identify the range of the outcomes.
In this case, the outcomes range from 50 to 70.

Step 2: Calculate the mean of the uniform random variable.
The mean (µ) of a uniform random variable is calculated using the formula:

µ = (a + b) / 2

where a is the minimum outcome value and b is the maximum outcome value.

Step 3: Apply the formula using the given values.
a = 50 (minimum outcome)
b = 70 (maximum outcome)

µ = (50 + 70) / 2
µ = 120 / 2
µ = 60

The mean outcome of this experiment with outcomes ranging from 50 to 70 using a uniform random variable is 60.

Learn more about Statistics: https://brainly.com/question/29093686

#SPJ11

Since the second derivative is always positive, we have a minimum at x = 12, which corresponds to the dimensions of the field we found.

To minimize the cost of the fence, we need to find the dimensions of the rectangular field that will give us the smallest perimeter.

Let's denote the width of the field as x and the length as y. Then, we have the area of the field as xy = 180.

The cost of the fencing for the width is $10/ft, which means the cost for the two width sides is $20x. The cost of the fencing for the remaining sides is $2/ft and $7/ft, which means the cost for the two length sides is $2y and the two remaining width sides is $7(x-2y).

So, the total cost of the fencing is C(x,y) = 20x + 2y + 7(x-2y) = 27x - 12y.

To find the dimensions that minimize the cost of the fence, we need to find the critical points of the cost function. Taking the partial derivatives of C(x,y) with respect to x and y, we get:

∂C/∂x = 27
∂C/∂y = -12

Setting both partial derivatives equal to zero, we find that there are no critical points since 27 and -12 are never equal to zero.

However, we can use the fact that the area of the field is xy = 180 to eliminate y from the cost function. Solving for y, we get:

y = 180/x

Substituting this into the cost function, we get:

C(x) = 27x - 12(180/x) = 27x - 2160/x

To find the minimum cost, we need to find the critical points of C(x). Taking the derivative of C(x) and setting it equal to zero, we get:

C'(x) = 27 + 2160/x^2 = 0

Solving for x, we get:

x = √(2160/27) = 12

Substituting this back into y = 180/x, we get:

y = 180/12 = 15

Therefore, the dimensions of the field that will minimize the cost of the fence are 12 ft by 15 ft. To justify that this is a minimum, we can use the second derivative test. Taking the second derivative of C(x), we get:

[tex]C''(x) = 4320/x^3 > 0 for all x ≠ 0[/tex]

Since the second derivative is always positive, we have a minimum at x = 12, which corresponds to the dimensions of the field we found.

To know more about dimensions of the field, refer here:

https://brainly.com/question/15311637

#SPJ11

Since no specific intervals were given, I cannot provide you with the global maximum and global minimum values on those intervals for function.

It appears that there might be a typo in the function, as the term "- 632" seems irrelevant. I will answer the question based on the corrected function: f(x) = [tex]73 - 6x^2 + 11[/tex]. Please let me know if this is incorrect.

To find the global maximum and global minimum values of the function f(x) = [tex]73 - 6x^2 + 11[/tex], follow these steps:

1. Calculate the derivative of the function to find the critical points.
f'(x) = [tex]d(73 - 6x^2 + 11)/dx = -12x[/tex]

2. Set the derivative equal to zero to find the critical points.
-12x = 0
x = 0

3. Evaluate the function at the critical points and endpoints of the interval(s) to determine the global maximum and global minimum.

Since no specific intervals were given, I cannot provide you with the global maximum and global minimum values on those intervals. Please provide the intervals.

Learn more about function here:

https://brainly.com/question/12431044

#SPJ11

By simplifying the integrand the the integral value of S4 1 ((√y-y)/y²)dy is 2√2 - 2 - ln(4).

To evaluate the given integral, we first simplify the integrand by rationalizing the numerator. Then we use the substitution u = √y - y, which transforms the integral into a standard form that can be easily integrated.

First, we will simplify the integrand:

(√y-y)/y² = [tex]y^{(-3/2)}[/tex] - [tex]y^{(-1)}[/tex]

Now we can integrate:

∫ from 1 to 4 of (√y-y)/y² dy

= ∫ from 1 to 4 of [tex]y^{(-3/2)}[/tex] dy - ∫ from 1 to 4 of [tex]y^{(-1)}[/tex] dy

= 2[tex]y^{(-1/2)}[/tex] - ln(y) evaluated from 1 to 4

= 2([tex]4^{(-1/2)}[/tex] - 1) - ln(4) + ln(1)

= 2(2/√2 - 1) - ln(4)

= 2√2 - 2 - ln(4)

Therefore, the value of the integral is 2√2 - 2 - ln(4).

Learn more about the integral at

#SPJ4

Based on the information, the correct answer is (228.1, 245.9).

And, This was calculated using a t-distribution with 11 degrees of freedom (n-1), since the sample size is 12.

Now, The formula for calculating the confidence interval is:

x ± tα/2 (s/√n)

where x is the sample mean, s is the sample standard deviation, n is the sample size, and tα/2 is the t-score that corresponds to the desired level of confidence (in this case, 95% confidence).

Hence, Plugging in the values we have:

⇒ 237 ± t0.025 (14/√12)

Using a t-table or calculator, we can find that t0.025 is approximately 2.201.

Therefore:

237 ± 2.201 (14/√12)

= (228.1, 245.9)

So, the correct answer is (228.1, 245.9).

Learn more about the addition visit:

https://brainly.com/question/25421984

#SPJ4

Answer:

30,000

Step-by-step explanation:

3 is in the place value of 5 over from the decimal. This means the place value is 30,000

Answer:

Step-by-step explanation:

A

The statement false is:

Expanding the sample size can decrease the power of a hypothesis test.

The correct option is (d)

The significance level is the probability of rejecting the null hypothesis when it is true. For example, a significance level of 0.05 indicates a 5% risk of concluding that a difference exists when there is no actual difference.

The level of statistical significance is often expressed as a p -value between 0 and 1. The smaller the p-value, the stronger the evidence that you should reject the null hypothesis. A p -value less than 0.05 (typically ≤ 0.05) is statistically significant.

The probability of making a type I error is α, which is the level of significance you set for your hypothesis test. An α of 0.05 indicates that you are willing to accept a 5% chance that you are wrong when you reject the null hypothesis.

The correct option is (d).

Learn more about Significance level at:

https://brainly.com/question/13947717

#SPJ4

(a) If A and B are disjoint, it implies that P(A and B) = 0, and (b) the General Addition Rule simplifies to the simpler Addition Rule for disjoint events, where the probability of either event occurring is the sum of their individual probabilities.

Disjoint events refer to events that cannot occur simultaneously, meaning they have no outcomes in common. If events A and B are disjoint, it implies that they cannot happen together, and therefore the probability of both events occurring, denoted as P(A and B), is equal to 0.

(a) If A and B are disjoint events, it means that they do not have any outcomes in common. In the given scenario, joint applications and having a mortgage are the two events being considered. The Venn diagram for this setup would have two circles representing these events, with no overlapping region since they are disjoint. The total number of loans in the data set is 10,000.

(b) To determine the probability of a randomly drawn loan from the data set being from a joint application where the couple had a mortgage, we need to find the intersection of the two events in the Venn diagram. The given data states that 1495 loans were from joint applications, 4789 applicants had a mortgage, and 950 had both of these characteristics. Therefore, the probability of a loan being from a joint application with a mortgage is 950/10,000 or 0.095.

(b) The probability that the loan had either of these attributes can be found by adding the probabilities of the two disjoint events, i.e., the probability of a loan being from a joint application (1495/10,000 or 0.1495) and the probability of a loan having a mortgage (4789/10,000 or 0.4789), since these events cannot occur simultaneously. Therefore, the probability of a loan having either of these attributes is 0.1495 + 0.4789 = 0.6284.

Therefore, (a) If A and B are disjoint, it implies that P(A and B) = 0, and (b) the General Addition Rule simplifies to the simpler Addition Rule for disjoint events, where the probability of either event occurring is the sum of their individual probabilities.

To learn more about probability here:

brainly.com/question/30034780#

#SPJ11

After the correction, the mean of the weights will now be 3.4 grams.

To find the new mean weight of the caterpillars after the correction, we need to first calculate the total weight of all 10 caterpillars before and after the correction.

Before the correction:
Mean weight = 3.3 grams
Total weight of all 10 caterpillars = 10 x 3.3 = 33 grams

After the correction:
Total weight of all 10 caterpillars = (33 - 2.5 + 3.5) = 34 grams

Therefore, the new mean weight of the caterpillars after the correction is:
New mean weight = Total weight of all 10 caterpillars / 10 = 34 / 10 = 3.4 grams

Learn more about mean here: https://brainly.com/question/26941429

#SPJ11

The outward flux of the given vector field F across the boundary surface of the solid region E is found to be 80π/3.

To apply the divergence theorem, we first need to find the divergence of the vector field F

div F = ∂/∂x (sin(9y) + 7xz) + ∂/∂y (zy + cos(x)) + ∂/∂z (z² + y²)

= 7x + z + 2z

= 7x + 3z

Next, we need to find the surface area and normal vector of the boundary surface dE. The boundary surface consists of the flat disk x² + y² ≤ 4 with z = 0. The surface area of the disk is A = πr² = 4π, where r = 2 is the radius of the disk. The normal vector points in the positive z direction, so we can take n = (0, 0, 1).

Now we can apply the divergence theorem

∫∫F · dS = ∭div F dV

where the triple integral is taken over the solid region E. Since E is symmetric about the xy-plane, we can write the triple integral as:

∭E (7x + 3z) dV = 2π ∫₀² [tex]\int\limits^0_{(\sqrt{(4-x^2)}[/tex]  [tex]\int\limits^0_{(\sqrt{(4-x^2-y^2)}[/tex] (7x + 3z) dz dy dx

Evaluating this integral using standard techniques (such as cylindrical coordinates) gives

∫∫F · dS = 80π/3

Therefore, the flux of the vector field F across the boundary surface dE is 80π/3.

To know more about flux:

https://brainly.com/question/29665619

#SPJ4

the Correct option of  coordinates of polygon A′B′C′D′ if polygon ABCD is rotated 90° counterclockwise is A.

In arithmetic, what is a polygon?

A polygon is a closed, two-dimensional, flat or planar structure that is circumscribed by straight sides. There are no curves on its sides. Polygonal edges are another name for the sides of a polygon. A polygon's vertices (or corners) are the places where two sides converge.

To determine the coordinates of polygon A′B′C′D′, we need to rotate each vertex of polygon ABCD 90° counterclockwise.

We can do this by using the following formulas for a 90° counterclockwise rotation of a point (x, y):

x' = -y

y' = x

Using these formulas, we can find the coordinates of each vertex of polygon A′B′C′D′ as follows:

A′(0, 0): Since (0, 0) is the origin, a 90° counterclockwise rotation will still result in (0, 0).

B′(-2, 5): To rotate the point (5, 2) 90° counterclockwise, we have x' = -y = -2 and y' = x = 5. So, B′ is (-2, 5).

C′(5, 5): To rotate the point (5, -5) 90° counterclockwise, we have x' = -y = 5 and y' = x = 5. So, C′ is (5, 5).

D′(3, 0): To rotate the point (0, -3) 90° counterclockwise, we have x' = -y = 0 and y' = x = 3. So, D′ is (3, 0).

Therefore, the coordinates of polygon A′B′C′D′ are A′(0, 0), B′(-2, 5), C′(5, 5), and D′(3, 0).

So, the answer is A) A′(0, 0), B′(−2, 5), C′(5, 5), D′(3, 0).

Learn more about polygon

brainly.com/question/24464711

#SPJ1