Limiting reactant: O2 and Amount of product formed: 47.7 g P2O3
To determine the limiting reactant and the amount of product formed, we need to first calculate the amount of product that can be formed from each reactant, assuming they completely react.
From the balanced chemical equation:
[tex]P4 + O2 → P2O3[/tex]
The stoichiometry of the reaction shows that 1 mole of P4 reacts with 5 moles of O2 to form 2 moles of [tex]P2O3[/tex]. Therefore, we need to calculate the number of moles of each reactant:
Number of moles of P4 = 65.1 g / 123.9 g/mol = 0.525 mol
Number of moles of O2 = 34.2 g / 32.0 g/mol = 1.069 mol
Next, we can calculate the amount of product that can be formed from each reactant:
From P4: (0.525 mol P4) x (2 mol P2O3 / 1 mol P4) x (109.9 g/mol P2O3) = 115.6 g P2O3
From O2: (1.069 mol O2) x (2 mol P2O3 / 5 mol O2) x (109.9 g/mol P2O3) = 47.7 g P2O3
Therefore, we can see that the amount of P2O3 that can be formed from O2 is lower than that of P4. This indicates that O2 is the limiting reactant, and P4 is in excess.
The maximum amount of product that can be formed is 47.7 g P2O3. This is the amount of product that would be formed if all the O2 was consumed. Therefore, the answer is:
Limiting reactant: O2
Amount of product formed: 47.7 g P2O3
To know more about Limiting reactant refer to-
https://brainly.com/question/14225536
#SPJ11
H2 + Br2 → 2HBr. How many liters of hydrogen gas are needed to react with 9.0 g of bromine?
We need 2.77 liters of hydrogen gas to react with 9.0 g of bromine.
From this equation, we can see that 1 mole of hydrogen gas (H2) reacts with 1 mole of bromine (Br2) to produce 2 moles of hydrogen bromide (HBr).
we need to use the molar mass of bromine, which is 79.9 g/mol.
Number of moles of Br2 = mass / molar mass = 9.0 g / 79.9 g/mol = 0.113 moles
Since 1 mole of H2 reacts with 1 mole of Br2, we need 0.113 moles of H2 to react with the given amount of Br2.
To find out how many liters of H2 are needed, we need to use the ideal gas law, which relates the number of moles of a gas to its volume:
PV = nRT
where P is the pressure of the gas (in atm), V is the volume (in liters), n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), and T is the temperature (in Kelvin).
Assuming standard conditions of temperature and pressure (STP), which are 0°C (273 K) and 1 atm, respectively, we can simplify the equation to:
V = nRT/P = (0.113 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm) = 2.77 L
For more such questions on bromine
https://brainly.com/question/11743983
#SPJ11
Calculate E0, E, and ΔG for the following cell reactions (a) Mg(s) + Sn2+(aq) ⇌ Mg2+(aq) + Sn(s) where [Mg2+] = 0. 055 M and [Sn2+] = 0. 055 M
The E° for cell reaction is - 2.37 V and 2.23 V and E for cell reaction = 2.22V and ΔG = - 428.39kJ/mol.
The formula for solving the equation for given cell is as follows :
E°cell , Ecell and Δ[tex]G_{rnx}[/tex]
The standard cell potential is the potential of cell at standard condition of 1MConcentration and pressure 1 atm E°cell
calculation :
E°cell = E° cathode - E° anode it is calculated using the Nernst equation which is discussed below :
Ecell = E°cell -- [tex]\frac{RT}{nF}[/tex] 1n K = E°cell -- [tex]\frac{0.0591}{n}[/tex]log [tex]\frac{Products}{Reactants}[/tex]
Here, F is the Faraday's constant, R is the gas constant, T is the temperature, and n is the number of transferred electrons. K is the equilibrium constant.
The Gibbs free energy is the greatest work that is finished by a framework . The standard cell potential is without like energy by the recipe as follows;and F is Faraday's steady.
A system's maximum amount of work is referred to as its Gibbs free energy. The standard cell potential is connected with the free energy by the recipe as follows: Δ G = -n F Ecell
Here, E cell is cell potential
Δ G is the free energy n is the quantity of electrons moved and F is Faraday's steady.
The given net cell equation is as follows: Mg + Sn²⁺⇒ Mg²⁺ + SnOxidation :
Mg ⇒ Mg ²⁺ + 2e⁻ E⁰anode = - 2.37 V
Reduction:Sn²⁺ + 2e⁻⇒ Sn E⁰
So, cathode = - 0.14V
The standard cell potential is calculated as follows:E⁰ cell = - 0.14 V- (- 2.37 V ) = 2.23 V
The half reaction potentials for the oxidation and reduction are determined. They are subbed in the equation and the standard cell potential is determined.
Number of electrons transferred , n = 2 ,[Mg²⁺] = 0.055M , [ Sn²⁺ ] = 0.030 M The Nernst equation for reaction :
Ecell = E °cell = [tex]\frac{0.0591}{n}[/tex]log Mg ²⁺ / Sn²⁺
The cell potential for reaction is :
Ecell = 2.23V - [tex]\frac{0.0591}{2}[/tex]log[tex]\frac{0.055M}{0.030M}[/tex]= 2.22V
The values are substituted for the reaction calculated here in the Nernst equation and cell potential.
Calculation for the free energy for reaction ,
] Δ[tex]G_{rxn}[/tex] = -nFE cell
= - 2 × 96485 C/ mol ×2.22 V
= --428393J/mol × [tex]\frac{1KJ}{1000J}[/tex] = - 428.39kJ/mol
The cell potential for the response is subbed in the recipe and free energy for the response is determined
Nernst equation :
The standard electrode potential, absolute temperature, the number of electrons involved in the redox reaction, and activities (often approximated by concentrations) of the chemical species undergoing reduction and oxidation, respectively, can all be used to calculate the reduction potential of a half-cell or full cell reaction using the Nernst equation, a chemical thermodynamic relationship.
Learn more about Nernst Equation :
brainly.com/question/15237843
#SPJ4
Reddish-brown color
don’t need a magnifying glass to see grains
gritty when dry
sticks to my fingers when wet
doesn’t smell like anything
dries quickly
does not get foamy with vinegar
damp soil made a ball but it fell apart quickly
What type of soil
Soils can come in many different colors, but reddish-brown is a common hue that can indicate the presence of iron oxides. These oxides can give the soil a rusty appearance, and are often found in soils that have been weathered over time.
Sandy soils that are reddish-brown in color are often found in arid regions, where the soil has been weathered by wind and water. These soils may be low in nutrients and organic matter, but can be ideal for certain types of plants that are adapted to dry conditions.
Clay soils that are reddish-brown in color are often found in areas with high rainfall, where the clay has been weathered by water and minerals have leached out. These soils can be rich in nutrients, but may be difficult to work with due to their tendency to become compacted and heavy.
Loamy soils that are reddish-brown in color are a combination of sand, clay, and silt particles, and are often considered the ideal type of soil for gardening and farming. These soils are typically rich in nutrients, but also drain well and are easy to work with.
Overall, the reddish-brown color of soil can provide valuable information about the characteristics and composition of the soil, which can help gardeners, farmers, and other professionals make informed decisions about how to manage and use the land.
To know more about reddish-brown refer here
https://brainly.com/question/22442737#
#SPJ11
Which are potential sources of error in the experiment? Check all that apply.
estimating temperature to the nearest tenth of a degree
estimating the mass of the sample to the nearest tenth of a gram
estimating the thickness of the foam cups
the position of the cups of sand and water under the heat lamp
the brand of light bulb used for the heat lamp
the air temperature outside the lab
answer A,B,D
Estimating temperature to the nearest tenth of a degree
Estimating the mass of the sample to the nearest tenth of a gram
The brand of light bulb used for the heat lamp
What is regarded as an error in an experiment?Numerous things can go wrong, including human error, ambient variables, measuring instrument limits, and systematic or random deviations in the experimental technique.
The errors that would occur in this experiment can be seen to stem more from the nature of the estimation and are essentially errors that occur due to the computation of the results.
Learn more about experiment:https://brainly.com/question/15737833
#SPJ1
Dalton's Law and the Ideal Gas Law
At what pressure will 4. 80 moles of fluorine gas have a volume of 60. 0 liters and a temperature of 298 K?
The pressure of the fluorine gas under these conditions is approximately 2.01 atmospheres.
To answer your question, we will use the Ideal Gas Law equation:
PV = nRT
Where:
P = pressure
V = volume (60.0 liters)
n = number of moles (4.80 moles)
R = gas constant (0.0821 L atm / K mol)
T = temperature (298 K)
We need to find the pressure (P). Rearrange the equation for P:
P = nRT / V
Now plug in the given values:
P = (4.80 moles * 0.0821 L atm / K mol * 298 K) / 60.0 liters
P ≈ 2.01 atm
So, the pressure of the fluorine gas under these conditions is approximately 2.01 atmospheres.
To learn more about temperature, refer below:
https://brainly.com/question/11464844
#SPJ11
Identify and explain one alternate view to the neoclassical view. What does this view consider that the neoclassical view does
not?
Alternate view to the neoclassical view is the Post-Keynesian view is Post-Keynesians believe that the neoclassical view does not adequately account for the role of uncertainty in economic decision-making, the importance of historical and institutional factors, and the potential for instability in markets.
Post-Keynesians argue that economic agents do not have perfect information and face uncertain future outcomes, which can lead to irrational decision-making and result in market failures. They also stress the importance of historical and institutional factors, such as power relations and social norms, in shaping economic outcomes.
Additionally, Post-Keynesians believe that markets are not inherently stable and can experience periods of instability and crisis, contrary to the neoclassical view that markets naturally tend toward equilibrium. The Post-Keynesian view emphasizes the role of uncertainty, history, and institutional factors in shaping economic outcomes, as well as the potential for instability in markets, which are not fully accounted for in the neoclassical view.
To know more about the Neoclassical, here
https://brainly.com/question/28351416
#SPJ4
The Keynesian view is an alternate view to the neoclassical view. It considers that there is a role for government in managing the economy through fiscal and monetary policy.
What is neoclassical?Neoclassical is an art and design style that emerged in the mid-18th century and is based on the classical styles of ancient Greece and Rome. Neoclassical art and design sought to revive the aesthetic principles of antiquity and emphasized the use of symmetry, order, and balance in its works. This style was seen in art, architecture, and furniture, and often included motifs from classical mythology.
It assumes that markets are not always efficient and that people may not always act rationally. This view considers that the economy may not always be in equilibrium and that there may be periods of recession or depression. It also considers that individuals and companies may not always respond to economic changes in the same way, and that government intervention may be necessary to ensure economic stability. This view does not assume that the market is self-regulating and that it will always reach equilibrium.
To learn more about neoclassical
https://brainly.com/question/28350870
#SPJ4
4. if 10.0 moles of naoh are dissolved in water to make 250.0 l of solution, what is the molarity of the
solution?
5. if 80.0 moles of naoh are dissolved in water to make 1.00 liter of solution, what is the molarity of the
solution?
6. if you have 1.00 liter of a 1.0 m solution of nacl, how many moles of nacl were dissolved in the water to
make that solution?
7. if you have 1.0 liter of a 1.00 m solution of nacl, how many moles of nacl were dissolved in the water to
make that solution?
write complete sentences.
8. how would you make 100.0 l of 1.0 m naoh?
If 10.0 moles of NaOH are dissolved in water to make 250.0 l of solution, the molarity of the solution is 0.04 moles
Molarity is defined as the number of moles of solute present in 1 litre of a solution. It is denoted by M and the formula is represented as
Molarity = number of moles of solute/ volume of the solution in L
According to given data
Number of moles of solute = 10 moles
volume of the solution = 250 L
Therefore, molarity = 10 moles/250 L
molarity = 0.04 moles.
Thus, molarity of the solution is 0.04 moles.
To know more about molarity here
https://brainly.com/question/29792363
#SPJ4
12. what is the weight/volume percent concentration of 100. ml of a 30.0% (w/v) solution of
vitamin c after diluting to 200. ml?
A 30% (w/v) solution of vitamin C was diluted to 200 ml. The weight/volume percent concentration of the resulting solution is 15%.
To find the weight/volume percent concentration after diluting, we need to use the formula:
C1V1 = C2V2
Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
Given:
C1 = 30% (w/v)
V1 = 100 mL
V2 = 200 mL
Using the formula, we can solve for C2:
C1V1 = C2V2
(30%)(100 mL) = C2(200 mL)
C2 = (30%)(100 mL) / (200 mL)
C2 = 15%
Therefore, the weight/volume percent concentration of the 100 mL of 30.0% (w/v) solution of vitamin C after diluting to 200 mL is 15%.
To know more about the vitamin C refer here :
https://brainly.com/question/29678198#
#SPJ11
If a 2000g block of metal lost 3120 j of heat energy is cooled from 212 c to 200 c, what is the specific heat of the metal
Explanation:
3120 j / (2000 g * (212-200 C) ) = .13 j /( g C)
Pressure is equal to force per unit area. P=F/A therefore F=PA
A brick has the following dimensions, 1. 00 mx 0. 200 m x 0. 500 m. The pressure exerted
by the brick on the floor is different when the brick is placed in different ways. If the
minimum pressure exerted by the brick on the floor is 100. 0 Pa, what is the force
exerted on the floor in newtons (N)?
O 200. N
0 50. 0 N
O 10. 0 N
O 100, N
A brick with dimensions 1.00 m x 0.200 m x 0.500 m exerts different pressures on the floor when placed in different ways. The force exerted on the floor is 20.0 N.
To calculate the force exerted on the floor by the brick, we need to first calculate the area of the face of the brick that is in contact with the floor. The minimum pressure exerted by the brick on the floor is given as 100.0 Pa. Therefore, the force exerted on the floor by the brick can be calculated as:
Force = Pressure x Area
The area of the face of the brick in contact with the floor is given by 1.00 m x 0.200 m = 0.200 m². Therefore, the force exerted on the floor by the brick is:
Force = 100.0 Pa x 0.200 m² = 20.0 N
Since 20.0 N is not listed in the given options, it seems there may be an error or discrepancy in the provided answer choices.
To know more about the force exerted refer here :
https://brainly.com/question/18315231#
#SPJ11
A balloon containing 2. 6 mol hydrogen has a volume of 3. 9 l. More hydrogen is added to the balloon, giving it a volume of 17. 1 l. How many moles of hydrogen were added? show your work
The moles of hydrogen added to the balloon to give it a volume of 17.1 L were 8.8 mol.
Determine the initial ratio of moles to volume:
Initial moles of hydrogen = 2.6 mol
Initial volume of the balloon (V₁) = 3.9 L
Ratio of moles to volume: 2.6 mol / 3.9 L = 0.6667 mol/L
Final volume of the balloon (V₂) = 17.1 L
Calculate the final moles of hydrogen in the balloon using the initial ratio of moles to volume.
Final moles of hydrogen (H₂) = Ratio of moles to volume * V₂
Final moles of hydrogen (H₂) = 0.6667 mol/L * 17.1 L = 11.4 mol
The number of moles of hydrogen added thus are:
Moles of hydrogen added = Final moles of hydrogen - Initial moles of hydrogen
Moles of hydrogen added = 11.4 mol - 2.6 mol = 8.8 mol
So, 8.8 moles of hydrogen were added to the balloon to give it a volume of 17.1 L.
To learn more about hydrogen visit:
https://brainly.com/question/24433860
#SPJ11
For photosynthesis to occur, 2801 kJ/mole of energy is required. Add the ΔH to the correct side of the equation below:
6 CO2 (g) + H2O (l) --> C6H12O6 (aq) + 6 O2 (g)
The change in heat or enthalpy change in the reaction for photosynthesis to occur has + 2801 kJ of energy on the reactant side.
Which part holds the energy?To show the energy necessary for the reaction to occur, the proper ΔH value should be added to the left side of the equation. As a result, the equation is:
6 CO₂ (g) + 6 H₂O (l) + 2801 kJ → C₆H₁₂O₆ (aq) + 6 O₂ (g)
it is true that the energy value is included as a reactant in the reaction, since it is required for the reaction to take place.
Find out more on photosynthesis here: https://brainly.com/question/26568636
#SPJ1
Lead can be prepared from galena (lead II sulfide) by roasting the galena in the presence of oxygen to form lead II oxide and sulfur dioxide. Heating the metal oxide with more galena creates the molten metal and more sulfur dioxide. If we start with 25 mol of PbS, how many moles of SO2 do we create from both steps of the reaction? How many moles of lead do we form?
PbS + O2 -> PbO + SO2
PbO + PbS -> Pb + SO2
Here, 50 mol of SO2 will be created, and 25 mol of lead will be formed from both steps of the reaction.
To determine the moles of SO2 created and moles of lead formed in both steps of the reaction, we'll first need to examine each step individually.
Step 1: PbS + O2 -> PbO + SO2
Starting with 25 mol of PbS, this reaction occurs in a 1:1 molar ratio with SO2. Thus, 25 mol of SO2 will be created in this step.
Step 2: PbO + PbS -> Pb + SO2
Since 25 mol of PbO is created in step 1, the same amount of PbS is available to react in step 2. This reaction also occurs in a 1:1 molar ratio with SO2, meaning that another 25 mol of SO2 will be created in this step.
The total amount of SO2 created in both steps is the sum of the moles produced in each step:
25 mol (from step 1) + 25 mol (from step 2) = 50 mol of SO2
Additionally, since the second step forms lead (Pb) in a 1:1 molar ratio with PbS, we will have 25 mol of lead formed.
To know more about the balancing of moles of a reaction, click below.
https://brainly.com/question/15364329
#SPJ11
Cause and Effect. Unbalanced forces acting on a Nebula result in___
a. A constant linear motion
b. Equilibrium of the nebula
c. A change in its motion
Unbalanced forces acting on a Nebula result in a change in its motion.(C)
When unbalanced forces act on a nebula, they disrupt its equilibrium and cause a change in its motion. This is due to Newton's First Law of Motion, which states that an object at rest or in constant linear motion will continue in that state unless acted upon by an unbalanced force.
In the case of a nebula, the unbalanced forces may come from nearby stellar explosions, passing stars, or gravitational interactions.
These forces can cause parts of the nebula to compress and collapse, initiating the formation of new stars and planetary systems. As a result, the motion of the nebula changes over time as it evolves and develops under the influence of these forces.(C)
To know more about Newton's First Law of Motion click on below link:
https://brainly.com/question/29775827#
#SPJ11
Describe the bonding you would expect to find in a coin made out of copper?
The bonding you would expect to find in a coin made out of copper is metallic bonding.
Metallic bonding is the strong attraction between positively charged metal ions and the surrounding delocalized electrons in a metallic lattice. Copper is a metal and its atoms are closely packed together, forming a lattice structure. In the case of a copper coin, copper atoms lose their outermost electrons to form positively charged copper ions (Cu⁺), which are then held together by the delocalized electrons that move freely throughout the metal lattice. This type of bonding gives copper its characteristic properties such as electrical conductivity, malleability, and ductility making it an ideal material for coinage.
To learn more about metallic bonding visit:
https://brainly.com/question/21081009
#SPJ11
How many grams of chlorine gas must be reacted with excess sodium iodide if 10 grams of sodium chloride are needed?
Answer:
sorry xouldnt answer all
Explanation:
thier is ¹² equations ln tour answer
What is the molar solubility of ag2cr04 in water? (ksp of ag2cro4 is 8.0 x 10-12)
The molar solubility of Ag₂CrO₄ in water is approximately 1.24 x 10^-4 mol/L.
The solubility of a salt in water can be calculated using its solubility product constant (Ksp) value. The Ksp expression for Ag₂CrO₄ is:
[tex]Ag_2CrO_4[/tex](s) ⇌ [tex]2Ag^+(aq)[/tex] + [tex]CrO_4^{2-}(aq)[/tex]
The Ksp expression for this equilibrium is:
Ksp = [Ag+]^2[[tex]CrO_4^{2-[/tex]]
where [Ag+] and [CrO₄²-] are the concentrations of Ag+ and CrO₄²- ions in the equilibrium, respectively.
Let's assume that the molar solubility of [tex]Ag_2CrO_4[/tex] in water is x mol/L. Since the Ag₂CrO₄ dissociates into 2 Ag+ ions and 1 [tex]CrO__4^2-[/tex] ion, the concentration of Ag+ ions and [tex]CrO_4^{2-}[/tex] ions in the equilibrium will be 2x and x, respectively. Substituting these values into the Ksp expression, we get:
Ksp = (2x)^2(x) = 4x^3
Now, we can solve for x:
Ksp = [tex]4x^3[/tex]
8.0 x [tex]10^-12[/tex] = [tex]4x^3[/tex]
[tex]x^3[/tex] = (8.0 x [tex]10^-12[/tex])/4
[tex]x^3[/tex] = 2.0 x [tex]10^{-12}[/tex]
x = (2.0 x [tex]10^{-12}[/tex])^(1/3)
x = 1.24 x [tex]10^{-4[/tex] mol/L
Therefore, the molar solubility of Ag₂CrO₄ in water is approximately 1.24 x [tex]10^{-4[/tex] mol/L.
To know more about molar solubility
https://brainly.com/question/28170449
#SPJ4
Determine the amount of heat required to convert 46. 0 g of ethanol at 25°c to the vapor phase at 78°c. Based on the melting and boiling points, ethanol is a liquid at 25°c. Consider the heating curve when organizing your thoughts and answering the question. Use the information about ethanol ch3ch2oh given in the table below.
The amount of heat required to convert 46.0 g of ethanol at 25° C to vapor phase is ≅ 44.2 KJ total heat .
Using the mass , evaluating the moles of ethanol :
46.0 g × [tex]\frac{1 Mol}{46.07 g}[/tex] = 0.998 mol
≅ 1.0 mol
The heat required to convert 46.0 g ethanol from 25° C at 78° C is evaluated :
q₁ = m[tex]C_{liquid }[/tex]ΔT
= 46.0 g × [tex]\frac{2.3 J}{g. K}[/tex] × 78° C - 25°C
= 5607.47J × 1 KJ /1000 J
= 5.607 KJ
So, the heat required in conversion of 1.0 mol of ethanol at 78 ° C to 1.0 mol ethanol vapour is expressed as :
q₂ = moles × Δ[tex]H_{vap}[/tex]
= 1.0 mol × 38.56 KJ /mol
= 38.56 kJ/ mol
The total heat requirement conversion of 46 .0 g of ethanol at 25° C to the vapour state at 78° C :
Total heat = q₁ + q₂
= 5.607 KJ + 38.56 KJ
= 44.167 KJ
≅ 44.2 KJ
Vapour phase :Fume alludes to a gas stage at a temperature where a similar substance can likewise exist in the fluid or strong state, beneath the basic temperature of the substance. As a result of their tendency to be volatile, liquids will enter the vapor phase when the temperature is raised sufficiently. At the specified temperature, a liquid is considered to be volatile if it exhibits a significant vapor pressure.
How does vapour phase transfer work?Transferring a substance from a vapor to a solid by desorbing it using a desorbent or carrier gas and passing the vapor sample through a stationary phase (such as silica particles).
Incomplete question :
Determine the amount of heat required to convert 46. 0 g of ethanol at 25°c to the vapor phase at 78°c. Based on the melting and boiling points, ethanol is a liquid at 25°c. Consider the heating curve when organizing your thoughts and answering the question. Use the information about ethanol CH₃CH₂OH given in the table below.
Use the following information about ethanol CH₃CH₂OH.
Tmelt = –114°C
Tboil = 78°C
∆Hfus = 5.02 kJ/mol
∆Hvap = 38.56 kJ/mol
C solid = 0.97 J/g-K
C liquid = 2.3 J/g-K
Learn more about Vapour phase :
brainly.com/question/28303854
#SPJ4
0. 18 g of a
divalent metal was completely dissolved in 250 cc of acid
solution containing 4. 9 g H2SO4 per liter. 50 cc of the
residual acid solution required 20 cc of N/10 alkali for
complete neutralization. Calculate the atomic weight of
metal.
39.
Ans: 36
The atomic weight of the metal is 36 g/mol.
To solve this problem, we need to use the concept of equivalent weight. The equivalent weight of a divalent metal is equal to its atomic weight divided by its valency, which in this case is 2.
First, let's calculate the number of equivalents of H2SO4 present in the solution.
4.9 g of H2SO4 per liter of solution means that there are 4.9/98 = 0.05 moles of H2SO4 per liter.
So in 250 cc (or 0.25 liters) of solution, there are 0.05 x 0.25 = 0.0125 moles of H2SO4.
Since H2SO4 is a diprotic acid, each mole of H2SO4 can donate 2 equivalents of H+. Therefore, the total number of equivalents of H+ present in the solution is 2 x 0.0125 = 0.025.
Now let's calculate the number of equivalents of alkali (which we know is N/10 or 0.1 N) required to neutralize 50 cc of the solution.
20 cc of N/10 alkali is equal to 0.002 equivalents of alkali (since N/10 alkali has a normality of 0.1, which means it can donate 0.1 equivalents of OH- per liter of solution).
Since the acid and alkali react in a 1:1 ratio, this means that there are also 0.002 equivalents of H+ in 50 cc of the solution.
Therefore, the initial number of equivalents of H+ in the solution must have been 0.025 + 0.002 = 0.027.
Now we can use this information to calculate the number of equivalents of metal present in the solution.
Since the metal is divalent, it will donate 2 equivalents of metal ions for every 1 equivalent of H+ that it reacts with.
Therefore, the number of equivalents of metal present in the solution is 0.027/2 = 0.0135.
Finally, we can calculate the atomic weight of the metal using the formula:
Atomic weight = Equivalent weight x Valency
In this case, the equivalent weight is equal to the atomic weight divided by 2 (since the metal is divalent).
So:
Atomic weight = Equivalent weight x 2
Atomic weight = (0.018 g / 0.0135 equivalents) x 2
Atomic weight = 36 g/mol
Therefore, the atomic weight of the metal is 36 g/mol.
Know more about Equivalent weight here:
https://brainly.com/question/2289615
#SPJ11
I’m the space provided below, show a correct numerical setup for calculating the total number of moles of ethylene glycol needed to prepare 2.50 liters of a 10.0 M solution?
2.50 litres of a 10.0 M solution require the preparation of 25.0 moles of ethylene glycol.
What is the recommended ratio of ethylene glycol to water?Excellent antifreeze, anti-boil, and anti-corrosive qualities are produced when antifreeze and water are mixed in a 50/50 ratio. The proportion of conventional ethylene glycol to water in severely cold conditions can reach 70% antifreeze, 30% water. The maximum antifreeze to water ratio when using DEX-COOL® is 60/40.
moles = concentration (M) x volume (L)
Given that the desired concentration is 10.0 M and the volume needed is 2.50 L, the setup for calculating the total number of moles of ethylene glycol can be written as:
moles = 10.0 M x 2.50 L
moles = 25.0 mol
To know more about solution visit:-
https://brainly.com/question/1416865
#SPJ1
How many moles of ammonia are produced when 4. 8 moles of nitrogen react with hydrogen? N2 + 3H2 — 2NH3
9.6 moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen.
To answer this question, we will use the balanced chemical equation provided: N2 + 3H2 — 2NH3. From this equation, we can see that for every 1 mole of nitrogen that reacts, 2 moles of ammonia are produced.
So, to determine how many moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen, we will first need to calculate how many moles of nitrogen are present in the reaction.
Since the coefficient for nitrogen is 1 in the balanced equation, we know that the number of moles of nitrogen is equal to 4.8.
Now we can use the mole ratio from the balanced equation to determine the number of moles of ammonia produced.
For every 1 mole of nitrogen, 2 moles of ammonia are produced, so we can set up a ratio:
1 mole of nitrogen : 2 moles of ammonia
Using the number of moles of nitrogen we calculated earlier (4.8 moles), we can multiply it by the ratio to find the number of moles of ammonia produced:
4.8 moles of nitrogen x 2 moles of ammonia / 1 mole of nitrogen = 9.6 moles of ammonia
Therefore, 9.6 moles of ammonia are produced when 4.8 moles of nitrogen react with hydrogen.
To know more about ammonia, visit:
https://brainly.com/question/31525313#
#SPJ11
You are in a car traveling 60 mph. the car stopped suddenly and you are thrown forward but are stopped by the seat belt. why are you thrown forward?
Answer:
when u stop at great speed in a vechial your body is in still in motion
Explanation:
If re glazing do you cover what was forgotten(in the 2nd firing) or you fàreglaze everywhere
When reglazing, you cover the areas that were forgotten in the 2nd firing as well as reglaze everywhere for a uniform appearance.
Reglazing involves applying a new layer of glaze to a previously fired ceramic piece to improve its appearance, fix any issues from previous firings, or to achieve a specific effect.
In your case, if some areas were missed or improperly glazed during the 2nd firing, you would want to apply glaze to those forgotten areas to ensure a consistent finish.
However, it's important to reglaze the entire piece, not just the missed areas, to maintain a uniform appearance and avoid any inconsistencies in the final result. Before reglazing, make sure the ceramic piece is clean and free of dust or debris.
Apply the glaze evenly, using an appropriate technique such as brushing or dipping, and then fire the piece again according to the glaze's specific firing temperature and instructions. This should result in a well-glazed and visually appealing ceramic piece.
To know more about firing temperature click on below link:
https://brainly.com/question/29363846#
#SPJ11
What set of coefficients will balance the chemical equation below:
___KNO3 (aq) + ___PbO (s) ___Pb(NO3)2 (aq) + ___K2O (s)
A. 2,1,1,1
B. 1,3,1,3
C. 2,2,2,1
D. 1,2,1,2
Answer:
Explanation:
The correct answer is A.2,1,1,1 ;
As Our balancing equation is totally a Mathematics calculation In which We have to make coefficients in a manner to have all the atoms got equal on both side of the reactants.
We do balancing for Conservation of Mass.
Read More:
brainly.com/balanceequation
A student determined that the mass of the carbon product was less than the mass of the sulfuric acid and sugar that were combined. how would you account for this loss of mass? use evidence and scientific reasoning to support your answer.
The loss of mass could be accounted for by the release of gases such as water vapor, carbon dioxide, and sulfur dioxide during the reaction between sulfuric acid and sugar.
This is due to the fact that both sugar and sulfuric acid are organic compounds, and when heated, they undergo dehydration and decomposition reactions respectively, producing gases that escape the system. The carbon product is also likely to be less dense than the reactants, resulting in a further loss of mass.
Additionally, some of the sugar may have not fully reacted due to incomplete mixing, resulting in residual sugar that was not accounted for in the mass measurement. Overall, the loss of mass is expected in any chemical reaction, and in this case, it can be attributed to the production of gases and incomplete reaction.
To learn more about loss of mass, here
https://brainly.com/question/31417203
#SPJ4
Question 1 (3 points)
Fe +
Cl₂ -->
FeCl3
Answer:
2Fe + 3Cl_2 → 2FeCl 3
Explanation:
To balance the equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. In this case, we have two iron atoms and six chlorine atoms on the left-hand side, and two iron atoms and six chlorine atoms on the right-hand side. To balance the equation, we can add a coefficient of 2 in front of FeCl3 to get:
2Fe + 3Cl_2 → 2FeCl 3
Now we have two iron atoms and six chlorine atoms on both sides of the equation, and the equation is balanced.
If an alveolus with an initial volume of 3 ml of air with a total pressure of 760 mmhg decreases in volume to 2 ml, what would the new pressure be and in which direction would air flow? assume you are at sea level.
The new pressure be and in which direction would air flow is 1140 mmHg.
Using Boyle's law, we know that the pressure and volume of a gas are inversely proportional. Therefore, if the volume of the alveolus decreases from 3 ml to 2 ml, the pressure inside the alveolus will increase by a factor of 3/2 or 1.5 times. The new pressure inside the alveolus will be 760 mmHg x 1.5 = 1140 mmHg.
According to the principles of gas flow, air moves from an area of higher pressure to an area of lower pressure. Therefore, in this scenario, air would flow out of the alveolus since the pressure inside the alveolus (1140 mmHg) is now higher than the atmospheric pressure outside the body (760 mmHg).
It's important to note that this scenario assumes that all other factors affecting the pressure inside the alveolus, such as temperature and the number of gas molecules, remain constant.
To know more about the Pressure, here
https://brainly.com/question/4339175
#SPJ4
Please help!!! The following thermodynamically favored reaction takes place in an acidified
galvanic cell.
O2(g) + 2 H2S(g) 2 S(s) + 2 H2O(l)
a. What is the half reaction that takes place at the anode?
b. What is the half reaction the takes place at the cathode?
c. Calculate the standard cell potential, Eo
cell.
d. What must the partial pressures of the reactants be in order to produce the
voltage in part c?
a. The anode is where oxidation occurs, so the half reaction taking place at the anode is: O₂(g) + 4 H⁺(aq) + 4 e⁻→ 2 H₂O(l)
b. The cathode is where reduction occurs, so the half reaction taking place at the cathode is: 2 H⁺(aq) + 2 e⁻+ 2 H₂S(g) → 2 S(s) + 2 H₂O(l)
c. To calculate the standard cell potential, Eocell, we need to add the reduction potential of the cathode and the oxidation potential of the anode. The reduction potential of the cathode half reaction is +0.15 V, and the oxidation potential of the anode half reaction is -1.23 V. Therefore, Eocell = +0.15 V + (-1.23 V) = -1.08 V.
d. To produce the voltage of -1.08 V, the reaction must be spontaneous, which means that the Gibbs free energy change, ΔG, must be negative.
The relationship between ΔG, Eocell, and the equilibrium constant, K, is: ΔG = -nFEocell = -RTlnK, where n is the number of electrons transferred, F is Faraday's constant, R is the gas constant, and T is the temperature.
Solving for K, we get: K = e^(-ΔG/RT) = e^(-nFEocell/RT).
Substituting the values, we get: K = e^(-(-2)(96485 C/mol)(-1.08 V)/(8.314 J/mol-K)(298 K)) = 4.5 x 10¹⁸. Since the reaction is in acid, the partial pressure of H⁺ is 1 atm.
Using the equilibrium constant expression for the reaction, K = [S]²/[H₂S]², we can solve for the partial pressure of H₂S: P(H₂S) = [S]/√K. Substituting the values, we get: P(H₂S) = (1 atm)/√(4.5 x 10¹⁸) = 6.7 x 10⁻¹⁰atm.
Therefore, the partial pressure of H₂S must be 6.7 x 10⁻¹⁰ atm, and the partial pressure of O₂ must be 1 atm, to produce the voltage in part c.
To know more about equilibrium constant :
https://brainly.com/question/29802105
#SPJ11
A sample of iodine-131 has an activity of 200 mCi. If the half-life of iodine-131 is 8. 0 days, what activity is observed after 16 days?
0. 5 half lives
Step [1]: Determine the number of half lives.
x 128
5. 88 x10-37
mci
16 days
128 half lives
2 half lives
80 half lives
1 day
Step [2]: Find the final activity.
50. 0 mci
200. Mci
200. Mci
(initial activity)
Iodine-131 is a radioactive isotope of iodine that has a half-life of 8.0 days. This means that after 8.0 days, half of the original amount of iodine-131 will have decayed, and after another 8.0 days (a total of 16 days), half of the remaining iodine-131 will have decayed again.
The activity of a radioactive sample is a measure of the number of radioactive decays that occur in a given time period. It is measured in units of becquerels (Bq) or curies (Ci). One curie is equal to 3.7 x 10^10 becquerels.
In this case, we are given that the initial activity of the sample is 200 mCi (milliCuries). To find the activity after 16 days, we can use the following equation:
Activity = Initial activity x (1/2)^(t/half-life)
where t is the time elapsed and half-life is the half-life of the isotope.
Substituting the given values, we get:
Activity = 200 mCi x (1/2)^(16/8)
Activity = 200 mCi x (1/2)^2
Activity = 200 mCi x 0.25
Activity = 50 mCi
Therefore, the activity observed after 16 days is 50 mCi. This means that half of the original iodine-131 has decayed in that time period. It is important to note that the actual number of atoms remaining in the sample will also be halved after 16 days, but the activity will be reduced by a factor of four (since activity is proportional to the number of decays per unit time).
To know more about radioactive isotope refer here
https://brainly.com/question/28039996#
#SPJ11
A) Determine the [OH−] of a solution that is 0. 145 M in CO32− ( Kb=1. 8×10−4 ).
Express your answer using two significant figures.
B) Determine the pH of a solution that is 0. 145 M in CO32−.
Express your answer to two decimal places.
C) Determine the pOH of a solution that is 0. 145 M in CO32−.
Express your answer to two decimal places
A) The value of concentration [OH⁻] = √(Kb*[CO₃²⁻]) = √(1.8×10⁻⁴*0.145) = 0.0034 M.
B) The pH of the solution is pH = -log[H⁺] = -log(2.24×10⁻¹²) = 11.65.
C) The pOH of the solution is pOH = -log(0.0034) = 2.47.
A) To determine the [OH⁻] of a solution that is 0.145 M in CO₃²⁻ (Kb=1.8×10⁻⁴), we can use the Kb expression of CO₃²⁻ and the fact that Kw (the ion product constant) is equal to [H⁺][OH⁻] to solve for [OH⁻].
The Kb expression for CO₃²⁻ is: Kb = [HCO₃⁻][OH⁻]/[CO₃²⁻]. Since the concentration of HCO₃⁻ is negligible compared to the concentration of CO₃²⁻, we can assume that [HCO₃⁻] is equal to 0.
B) To determine the pH of a solution that is 0.145 M in CO₃²⁻, we need to find the concentration of H⁺ in the solution. Since CO₃²⁻ can act as a base, it can react with water to form HCO₃⁻ and OH⁻.
The Kb expression for CO₃²⁻ can be rewritten as: Kw/Kb = [H⁺][OH⁻]/[CO₃²⁻] = [H⁺][OH⁻]/0.145. Solving for [H⁺], we get [H⁺] = Kw/[OH⁻][CO₃²⁻] = 1.0×10⁻¹⁴/(0.0034*0.145) = 2.24×10⁻¹² M.
C) To determine the pOH of a solution that is 0.145 M in CO₃²⁻, we can use the fact that pOH = -log[OH⁻]. From part A, we know that the [OH⁻] of the solution is 0.0034 M.
To know more about ion product constant click on below link:
https://brainly.com/question/9876097#
#SPJ11
