Name the property that allow the filter Paper to carry out its function

The volume of the balloon after the addition of the extra gas is 101.8 L.

The volume of the balloon after the addition of the extra gas can be calculated using the combined gas law, which relates the initial and final conditions of pressure, volume, and temperature of a gas. We need to convert the number of moles of argon to its corresponding volume using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

For the initial conditions, we have:

P1V1 = n1RT1

(assume the temperature is constant)

V1 = n1RT1/P1

V1 = (2.51 mol)(0.08206 L atm mol⁻¹ K⁻¹)(273 K)/(1 atm)

V1 = 55.0 L

For the final conditions, we have:

P2V2 = n2RT2

(assume the temperature is constant and the pressure is 1 atm)

V2 = n2RT2/P2

V2 = (2.51 mol + 3.13 mol)(0.08206 L atm mol⁻¹ K⁻¹)(273 K)/(1 atm)

V2 = 101.8 L

As a result, the capacity of the balloon after adding the extra gas is 101.8 L.

To know more about the Balloon, here

https://brainly.com/question/13516488

#SPJ4

To determine the formula of the hydrated salt, we need to first find the empirical formula by determining the smallest whole number ratio of the elements present in the compound.

Then, we can use the molar mass of the empirical formula and the percentage composition of the water to find the molecular formula.

Step 1: Find the empirical formula

Assuming 100 g of the compound, we can calculate the masses of each element present:

- Iron: 20.14 g

- Oxygen: 23.02 g

- Sulphur: 11.51 g

- Water: 45.32 g

Next, we need to convert these masses to moles:

- Iron: 20.14 g / 55.85 g/mol = 0.360 mol

- Oxygen: 23.02 g / 16.00 g/mol = 1.439 mol

- Sulphur: 11.51 g / 32.06 g/mol = 0.359 mol

- Water: 45.32 g / 18.02 g/mol = 2.515 mol

We can then divide each mole value by the smallest mole value to get the mole ratio:

- Iron: 0.360 mol / 0.359 mol ≈ 1

- Oxygen: 1.439 mol / 0.359 mol ≈ 4

- Sulphur: 0.359 mol / 0.359 mol = 1

- Water: 2.515 mol / 0.359 mol ≈ 7

The mole ratio is approximately 1:4:1:7, which gives us the empirical formula:

FeSO4·7H2O

Step 2: Find the molecular formula

The empirical formula mass of FeSO4·7H2O is:

(55.85 + 32.06 + 4(16.00)) + 7(18.02) = 278.00 g/mol

We know from the problem that the molecular mass of the salt is 278 g/mol, so the empirical formula is also the molecular formula. Therefore, the formula of the hydrated salt is FeSO4·7H2O.

To know more about empirical refer here

https://brainly.com/question/977538#

#SPJ11

Gerald T. Moneybottom's action of buying the Amazon rainforest and protecting it from logging has significant positive impacts on both the environment and human health.

By preventing logging, he ensures the survival of various endangered tree species, which could have otherwise become extinct. The rainforest is home to many unique plants and animals that have yet to be discovered and studied, and some of these species could potentially have medicinal properties.

By protecting the rainforest, Moneybottom has provided an opportunity for scientists to study these species and develop new medicines that can improve human health.

In addition to the medicinal benefits, the rainforest also serves as a natural carbon sink, absorbing carbon dioxide from the atmosphere and slowing down the process of global warming.

The preservation of the Amazon rainforest helps to mitigate the effects of climate change by reducing the amount of carbon dioxide in the atmosphere. This action contributes to the effort to reduce greenhouse gas emissions and fight climate change, which is a critical global issue.

To know more about Amazon rainforest  refer to-

https://brainly.com/question/28290952

#SPJ11

Boyle's Law states that the product of the pressure and volume of a gas is constant when the temperature is held constant. Mathematically, this can be expressed as:

PV = k, where P represents pressure, V represents volume, and k is a constant value.

From this equation, it becomes evident that if the temperature remains constant, an increase in pressure will result in a decrease in volume, and vice versa. In simpler terms, when the temperature is constant, the volume of a gas is inversely proportional to its pressure.

To further illustrate this point, consider a gas enclosed in a piston. If the temperature remains constant and you apply more pressure to the piston by compressing it, the volume of the gas will decrease. Conversely, if you decrease the pressure by allowing the piston to expand, the volume of the gas will increase.

In summary, when the temperature of a gas is constant, its volume and pressure share an inverse relationship, as described by Boyle's Law. This means that an increase in pressure will lead to a decrease in volume, while a decrease in pressure will lead to an increase in volume.

To know more about Boyle's Law refer here

https://brainly.com/question/30367067#

#SPJ11

Tributaries meets river at a confluence.

The reaction involves 3 moles of [tex]O_2[/tex] and [X] mol [tex]H_3PO_4[/tex]. The number of moles  [tex]H_3PO_4[/tex]  is not given, The number of moles  [tex]H_3PO_4[/tex] that can form during the reaction.  

The number of moles of  [tex]H_3PO_4[/tex] that can form during a reaction, we need to know the number of moles of reactants and the number of moles of products involved in the reaction, as well as the ratio of the coefficients of the reactants and products.

In this case, the reaction is:

[X] mol  [tex]H_3PO_4[/tex] + 3 mol  [tex]O_2[/tex]  → 3 mol  [tex]H_2O[/tex]. + 3 mol [tex]P_4O_{10[/tex]

We can start by solving for the number of moles of  [tex]H_3PO_4[/tex] that can form:

[X]  mol  [tex]H_3PO_4[/tex] + 3 mol  [tex]O_2[/tex]  → 3 mol  [tex]H_2O[/tex]. + 3 mol  [tex]P_4O_{10[/tex]

[X] mol  [tex]H_3PO_4[/tex] + 3 mol  [tex]O_2[/tex]  → 3 mol  [tex]H_2O[/tex]. + 3 mol  [tex]P_4O_{10[/tex]

1 mole  [tex]H_3PO_4[/tex] can form 3 moles of  [tex]H_2O[/tex]., so:

[X] mol  [tex]H_3PO_4[/tex] * 3 mol  [tex]H_2O[/tex]/mol  [tex]H_3PO_4[/tex] = 3 mol  [tex]H_2O[/tex].

Therefore, 1 mole of  [tex]H_3PO_4[/tex] can form 3 moles of [tex]H_2O[/tex].

The number of moles of  [tex]H_3PO_4[/tex] that can form during the reaction, we need to know the number of moles of reactants and the number of moles of products involved in the reaction, as well as the ratio of the coefficients of the reactants and products.

The reaction involves 3 moles of  [tex]O_2[/tex]  and [X] mol  [tex]H_3PO_4[/tex]. The number of moles of  [tex]H_3PO_4[/tex] is not given, so we cannot determine the number of moles of  [tex]H_3PO_4[/tex] that can form during the reaction.  

Learn more about moles Visit: brainly.com/question/29367909

#SPJ4

Answer:

7.250 x 1094 atoms of Magnesium, Mg is equal to 0.008038 grams.

I hope this helps you

When magnesium reacts with hydrochloric acid, magnesium chloride and hydrogen gas are produced according to the balanced chemical equation. The amount of reactants and products can be calculated using stoichiometry.

What is Mole?

In chemistry, mole is a unit of measurement used to express amounts of a chemical substance. One mole of a substance contains the same number of entities, such as atoms, molecules, or ions, as there are in 12 grams of carbon-12.

a. The products of the reaction between Mg(s) and HCl(aq) are MgCl2(aq) and H2(g).

b. The balanced chemical equation is: Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)

c. In the reaction, solid magnesium (Mg) reacts with hydrochloric acid (HCl) to produce magnesium chloride (MgCl2) in solution and hydrogen gas (H2). The sentence equation for the reaction is: Magnesium reacts with hydrochloric acid to form magnesium chloride and hydrogen gas.

d. The balanced equation shows that 1 mole of Mg reacts with 2 moles of HCl. Therefore, if 1.54 moles of Mg reacts, it will consume 2 x 1.54 = 3.08 moles of HCl.

e. The balanced equation shows that 1 mole of HCl produces 1 mole of H2 gas. Therefore, 2.56 x 10(-7) grams of HCl will produce (1/36.46) x (2.56 x 10(-7)/1000) moles of H2 gas, which is approximately 7.01 x 10(-12) moles of H2 gas.

f. The balanced equation shows that 1 mole of Mg reacts with 2 moles of HCl. Therefore, to react with 0.03 moles of HCl, we need (0.03/2) moles of Mg, which is 0.015 moles of Mg. The mass of Mg needed can be calculated by multiplying the number of moles by the molar mass of Mg: 0.015 x 24.31 g/mol = 0.365 g of Mg.

g. The balanced equation shows that 1 mole of Mg produces 1 mole of H2 gas. Therefore, to produce 7.92 grams of H2 gas, we need (7.92/2) moles of Mg, which is 0.206 moles of Mg. The mass of Mg needed can be calculated by multiplying the number of moles by the molar mass of Mg: 0.206 x 24.31 g/mol = 5.00 g of Mg.

To know more about Mole, visit;

https://brainly.com/question/29367909

#SPJ4

Answer:

For 25.6 grams of oxygen you will need 2*25.6 grams of hydrogen because water has two molecules of hydrogen and one molecule of oxygen the final mass of water is 76.8 grams

As water evaporates, the concentration of ions in the remaining solution will increase.

This is because as water evaporates, it leaves behind the dissolved ions, which become more concentrated in the remaining solution. The extent of this concentration increase will depend on the initial concentration of the ions in the original solution and the rate of water evaporation.

In general, the longer the water is allowed to evaporate, the more concentrated the remaining solution will become.

For example, imagine a solution containing salt dissolved in water. As the water evaporates, the concentration of salt ions in the solution will increase, making the solution increasingly salty. If the solution is left to evaporate completely, all the water will eventually be gone and only the salt crystals will remain.

In this case, the concentration of salt ions will be at its maximum.

Overall, the concentration of ions in a solution will increase as water evaporates, resulting in a more concentrated solution. This can have implications for a variety of processes, from cooking to chemical reactions, where precise control of ion concentration may be necessary for the desired outcome.

To know more about concentration of ions, visit:

https://brainly.com/question/14526375#

#SPJ11

The theoretical yield of oxygen from the oxides present in a 1.00 kg sample of lunar soil will depend on the composition of the soil. However, we can make some assumptions based on the known composition of lunar soil.

Lunar soil is known to contain various oxides, including silicon dioxide (SiO2), aluminum oxide (Al2O3), iron oxide (FeO and Fe2O3), titanium dioxide (TiO2), and others. These oxides can be chemically processed to release oxygen gas.

The stoichiometry of the chemical reactions involved will depend on the specific oxides present in the soil. However, for the purposes of estimation, we can assume that all the oxides present in the soil are converted to their respective metals and oxygen gas.

For example, the reaction for the conversion of silicon dioxide to silicon metal and oxygen gas is:

SiO2(s) + 2 C(s) → Si(s) + 2 CO(g)

From this reaction, we can see that for every 1 mole of SiO2, 1 mole of oxygen gas is produced. The molar mass of SiO2 is 60.08 g/mol, so in a 1.00 kg sample of lunar soil, there are:

1000 g / 60.08 g/mol = 16.65 moles of SiO2

Therefore, the theoretical yield of oxygen gas from the SiO2 present in the soil is:

16.65 moles of O2 (since 1 mole of SiO2 produces 1 mole of O2)

Similarly, we can calculate the theoretical yield of oxygen gas from the other oxides present in the soil using their respective stoichiometric equations. Adding up the oxygen yields from each oxide will give us the total theoretical yield of oxygen from the soil.

Note that the actual yield of oxygen will likely be less than the theoretical yield due to inefficiencies and losses during the processing of the soil.

To know more about theoretical refer here

https://brainly.com/question/30604977#

#SPJ11

To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.

pH is a measure of the acidity or basicity of a solution. It is a logarithmic scale ranging from 0 to 14, where a pH of 7 is considered neutral, below 7 is acidic, and above 7 is basic.

If you add too much water to your solution, it will dilute the concentration of the substance in the mixture and may change the pH. To get the initial pH, you cannot simply add the same volume of the substance as the water you added back into the mixture.

This is because the amount of substance required to achieve the desired pH is dependent on the concentration of the substance in the mixture.

To determine the amount of substance required to achieve the desired pH, you need to calculate the new concentration of the substance in the diluted solution. This can be done using the formula:

C1V1 = C2V2

Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

Once you have calculated the new concentration, you can then add the required amount of substance to the diluted solution to achieve the desired pH.

In summary, adding too much water to a solution can change the pH, and adding the same volume of substance as the water added will not restore the initial pH. To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

The wave speed is 6 m/s.

The frequency of the wave is given as 2 Hz, which means that two wavelengths pass a given point each second. The distance between wave crests (wavelength) is given as 3 m.

The distance between wave crests is the wavelength (λ), which is 3 m in this case. The frequency (f) is given as two wavelengths passing a given point each second, so f = 2 Hz.

Using the formula:

We can plug in the values to get:

Therefore, the wave speed is 6 m/s.

To learn more about Wave speed, here

https://brainly.com/question/31682106

#SPJ4

To calculate the mass of mercury(I) chloride that the chemist has added to the reaction flask, we need to know the molar mass of the compound and the number of moles of the solution added.

The molar mass of mercury(I) chloride is 232.6 g/mol. The chemist added an unspecified volume of the solution, so we cannot directly calculate the number of moles added. However, we can use the concentration of the solution, which is typically given in units of moles per liter (mol/L).

Let's assume that the concentration of the mercury(I) chloride solution is 0.1 mol/L. This means that there are 0.1 moles of mercury(I) chloride in every liter of the solution. We don't know how much of the solution the chemist added, but we can use a conversion factor to calculate the number of moles based on the volume.

For example, if the chemist added 10 mL of the solution, we can convert that to liters by dividing by 1000 (1 mL = 0.001 L).
10 mL x (0.001 L/1 mL) = 0.01 L
Now we can use the concentration to calculate the number of moles:

0.1 mol/L x 0.01 L = 0.001 mol
Finally, we can use the molar mass to convert from moles to grams:
0.001 mol x 232.6 g/mol = 0.2326 g

To convert to micrograms, we need to multiply by 1,000,000:
0.2326 g x 1,000,000 µg/g = 232,600 µg
Therefore, the mass of mercury(I) chloride added to the reaction flask is 232,600 µg, rounded to significant digits.

It's worth noting that the exact answer will depend on the actual concentration of the solution and the volume added, but this calculation provides a general approach to solving this type of problem.

To know more about chemist  refer here

https://brainly.com/question/30007736#

#SPJ11

The reaction rate of Compound A with respect to benzene refers to the speed at which Compound A reacts with benzene in a chemical reaction.

It is typically measured by monitoring the rate of formation of a product or the disappearance of a reactant over time. The reaction rate can be influenced by various factors, such as temperature, concentration, pressure, and the presence of catalysts or inhibitors. Understanding the reaction rate of each compound analyzed with respect to benzene is important in determining the efficiency and effectiveness of the reaction, as well as in optimizing reaction conditions for maximum yield and purity of the desired product.

To know more about benzene, here

brainly.com/question/14525517

#SPJ4

--The complete question is, What is the reaction rate of Compound A with respect to benzene? --

The main difference between Galileo's work and previous scientist work is, that Galileo was a scientist who believed in the scientific method rather than abstract theory.

Galileo was a scientist who help in discovering a technological telescope to capture the movement of planets and stars. He has contributed to the field of physics, mathematics, philosophy, and so on. He worked over scientific theory rather than the abstract theory used by other scientists. The scientific theory emphasizes more real-life incidents, facts, and explanations behind any work. Abstract theory is based on the general ideas, assumptions, and thinking of any individual about a subject or incident.

To know more about Galileo here

https://brainly.com/question/19040804

#SPJ4

The pH of the buffered solution is approximately 4.48.

The Henderson-Hasselbalch equation, which connects the pH of a buffered solution to the acid's pKa and the full concentrations of both the acid and its conjugate base as given by the situation, can then be used.

pH = pKa + log([conjugate base]/[acid])

In order to determine the pH of a buffered solution made by combining 21.5 g of benzoic acid ([tex]C_7H_6O_2[/tex]) and 37.7 g of sodium benzoate ([tex]NaC_7H_5O_2[/tex]) in water, we first need to figure out the buffer system's equilibrium constant (Ka). The benzoic acid's Ka value is  [tex]6.3 * 10^{-5}[/tex].

Substituting the values into the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([NaC_7H_5O_2]/[C_7H_6O_2]) \\pH = 4.2 + log(37.7/21.5)[/tex]

pH = 4.2 + 0.28

pH = 4.48

To know more about Buffered Solution, here

brainly.com/question/24262133

#SPJ4

When water is boiling :B. the molecules at the surface of the liquid evaporate first.

a. This is because the heat energy is transferred to the water from the bottom, causing the water molecules to gain energy and move faster. As the water molecules move faster, they collide with each other and break the intermolecular forces that hold them together. The water molecules at the surface have weaker intermolecular forces compared to those in the bulk of the liquid, which means they can more easily overcome these forces and evaporate.

b. The part of a liquid molecule that usually has the highest kinetic energy is the part that is moving the fastest. In a water molecule, this would be the oxygen atom, as it is larger and has more electrons than the hydrogen atoms. The oxygen atom therefore has a greater mass and a larger electron cloud, which allows it to move more quickly than the hydrogen atoms.

Learn more about molecules here:https://brainly.com/question/26556885

#SPJ1

The amount of energy needed to change a material from a liquid to a gas is called the heat of vaporization. This is a specific type of enthalpy change that occurs when a substance changes phase from a liquid to a gas at a constant temperature and pressure.

The heat of vaporization is a measure of the amount of energy required to break the intermolecular forces holding the molecules in a liquid phase and transform them into a gas phase.

The heat of vaporization is an important physical property of a substance and is used in various fields, such as thermodynamics, chemical engineering, and material science, to understand the behavior and properties of substances in different states.

To know more about the heat of vaporization refer here :

https://brainly.com/question/12625048#

#SPJ11

From the Electron Configuration of Mystery Elements:

Mystery element A has an electron configuration of 2-8-18-7, which means it has 7 valence electrons. Based on this, it would be reactive because it only needs one more electron to complete its outermost shell of eight electrons, which is the stable configuration of noble gases. This is supported by the PPT slide evidence, which states that elements with fewer than 4 or more than 7 valence electrons tend to be reactive.

Mystery element D has an electron configuration of 2-8-8-2, which means it has 2 valence electrons. Based on this, it would be reactive because it only needs to lose or gain two electrons to complete its outermost shell. This is also supported by the PPT slide evidence, which states that elements with 1-3 valence electrons tend to lose electrons to form positive ions, while elements with 5-7 valence electrons tend to gain electrons to form negative ions. Therefore, mystery element D could either form a positive ion by losing two electrons or form a negative ion by gaining six electrons.

Find out more on Valence Electrons here: https://brainly.com/question/371590

#SPJ1

The mass of water present in the calorimeter was 110.6 g.

The heat released by the reaction of magnesium oxide with hydrochloric acid was absorbed by the water in the calorimeter, resulting in a change in the temperature of the water. Using the equation

Q = mcΔT

where Q is the heat released, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature, we can calculate the mass of water present:

Q = mcΔT

4860J = m x 4.18 J/g°C x (46.0°C - 25.0°C)

m = 4860J ÷ (4.18 J/g°C x 21.0°C)

m = 110.6 g

To learn more about mass follow the link:

brainly.com/question/15959704

#SPJ4

When CO₂ is heated from 15°C to 37°C, its molar internal energy changes by 2446.2 J/mol, as does its molar enthalpy.

The following equation can be used to determine how carbon dioxide (CO₂) will change in molar enthalpy and molar internal energy when heated from 15 to 37 degrees Celsius:

ΔH = ΔU + ΔnRT

ΔU = nCvΔT

where:

ΔH = change in molar enthalpy of CO₂ (in J/mol)

ΔU = change in molar internal energy of CO₂ (in J/mol)

Δn = change in moles of CO₂ (in mol)

R = universal gas constant (8.314 J/(mol·K))

T = temperature (in K)

Cv = molar heat capacity at constant volume (in J/(mol·K))

ΔT = change in temperature (in K)

First, let's calculate the change in temperature:

ΔT = T2 - T1

= (37 + 273.15) K - (15 + 273.15) K

= 22 K

Next, let's calculate the change in molar internal energy:

ΔU = nCvΔT

= 3 mol × 37.1 J/(mol·K) × 22 K

= 2446.2 J/mol

Now, let's calculate the change in molar enthalpy using the equation:

ΔH = ΔU + ΔnRT

where Δn = 0 because the number of moles of CO₂ does not change during heating. Therefore:

ΔH = ΔU + ΔnRT

= 2446.2 J/mol + 0 mol × 8.314 J/(mol·K) × (37 + 273.15) K

= 2446.2 J/mol

To know more about molar enthalpy, refer:

https://brainly.com/question/30627521

#SPJ4

The final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

The Charles's law states the relationship between the volume and the temperature of a gas when the pressure is constant. We can use the formula for the relationship between volume and temperature of a gas: [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]

where [tex]V_{1}[/tex] and [tex]T_{1}[/tex] are the initial volume and temperature, and [tex]V_{2}[/tex] and [tex]T_{2}[/tex] are the final volume and temperature.

We are given [tex]V_{1}[/tex] = 35.0 L and [tex]T_{1}[/tex] = 45.0°C = 45.0°C + 273.15 = 318.15 K,

and we need to find [tex]V_{2}[/tex] when [tex]T_{2}[/tex] = 12.0°C = 12.0°C + 273.15 = 285.15 K .  

Now by using the formula:

35.0 L / 318.15 K = [tex]V_{2}[/tex] / 285.15 K

[tex]V_{2}[/tex] = (35.0 L / 318.15 K) × 285.15 K

[tex]V_{2}[/tex] = 31.4 L

Therefore, the final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

To know more about Charles's law visit:

https://brainly.com/question/16927784

#SPJ11

The rate at which NH3 reacts in the given reaction is 4.00 mol L-1 s-1. This is determined by using the stoichiometry of the reaction and the given rate of formation of N2.

The given chemical reaction shows the stoichiometric relationship between the reactants and products, which is important in determining the rate of the reaction. The rate of formation of N2 is given as 2.00 mol L-1 s-1. This means that for every second, the concentration of N2 increases by 2.00 mol L-1.

To find the rate at which NH3 reacts, we need to look at the stoichiometry of the reaction. From the balanced equation, we can see that for every 4 moles of NH3 that react, 2 moles of N2 are formed. Therefore, the ratio of the rate of formation of N2 to the rate of consumption of NH3 is 2:4, or 1:2.

Using this ratio, we can calculate the rate at which NH3 reacts. If the rate of formation of N2 is 2.00 mol L-1 s-1, then the rate of consumption of NH3 is twice as much, or 4.00 mol L-1 s-1.

In summary, the rate at which NH3 reacts in the given reaction is 4.00 mol L-1 s-1. This is determined by using the stoichiometry of the reaction and the given rate of formation of N2.

To know more about stoichiometry, visit:

https://brainly.com/question/30215297#

#SPJ11

The difference in temperature from Saturday to Sunday is 9 degrees Celsius. This means that the temperature increased by 9 degrees from Saturday to Sunday.

To show the difference in temperature from Saturday to Sunday, we can use the equation:

Difference = Sunday temperature - Saturday temperature

Given that the temperature on Saturday is -13° and on Sunday it is -4°, we can calculate the difference in temperature using the above equation as follows:

Difference = -4° - (-13°)

Difference = -4° + 13°

Difference = 9°

The number line is a graphical representation of numbers where we can visualize their position relative to each other. Starting from -13° on the number line and moving 9 units to the right, we reach -4°, which represents the temperature on Sunday. This visualization confirms that the difference between the two temperatures is 9 degrees.

To learn more about temperature follow the link:

brainly.com/question/14633960

#SPJ4

The pH of the resulting solution after adding 0.0248 moles of hydrochloric acid to the buffer containing 0.348 M ammonium chloride and 0.339 M ammonia is approximately 7.967.

To calculate the pH of the resulting solution after adding hydrochloric acid to a buffer containing 0.348 M ammonium chloride and 0.339 M ammonia, follow these steps:

1. Determine the initial moles of ammonium chloride (NH₄Cl) and ammonia (NH₃) in the solution:
- Moles of NH₄Cl = (0.348 M) x (0.125 L) = 0.0435 moles
- Moles of NH₃ = (0.339 M) x (0.125 L) = 0.042375 moles

2. Calculate the moles of NH₄Cl and NH₃ after the reaction with HCl:
- Moles of HCl added = 0.0248 moles
- The reaction between NH₃ and HCl produces NH₄Cl: NH₃ + HCl → NH₄Cl
- Moles of NH₄Cl after reaction = 0.0435 moles (initial) + 0.0248 moles (from HCl) = 0.0683 moles
- Moles of NH₃ after reaction = 0.042375 moles (initial) - 0.0248 moles (reacted with HCl) = 0.017575 moles

3. Calculate the new concentrations of NH₄Cl and NH₃:
- [NH₄Cl] = 0.0683 moles / 0.125 L = 0.5464 M
- [NH₃] = 0.017575 moles / 0.125 L = 0.1406 M

4. Use the Henderson-Hasselbalch equation to find the pH:
- pH = pKₐ + log ([NH₃] / [NH₄⁺])
- The pKₐ of ammonia (NH₃) is 9.25
- pH = 9.25 + log (0.1406 / 0.5464) = 9.25 - 1.283 = 7.967

The pH of the resulting solution after adding 0.0248 moles of hydrochloric acid to the buffer containing 0.348 M ammonium chloride and 0.339 M ammonia is approximately 7.967.

To know more about Henderson-Hasselbalch equation :

https://brainly.com/question/13423434

#SPJ11

The pH of the buffer is 4.60.

To calculate the pH of a buffer, we can use the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])[/tex]

where pKa is the dissociation constant of the weak acid, [tex][A-][/tex] is the concentration of the conjugate base, and [tex][HA][/tex] is the concentration of the weak acid.

In this case, the weak acid is acetic acid[tex](HC2H3O2)[/tex], the conjugate base is acetate [tex](C2H3O2-)[/tex], and the dissociation constant (Ka) is [tex]1.8 × 10^-5[/tex].

First, we need to calculate the ratio of [tex][A-]/[HA][/tex]:

[tex][A-]/[HA] = (0.162 M)/(0.225 M) = 0.72[/tex]

Next, we can substitute the values into the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])\\pH = -log(1.8 × 10^-5) + log(0.72)[/tex]

pH = 4.74 + (-0.14)

pH = 4.60

Therefore, the pH of the buffer is 4.60.

To know more about pH refer to-

https://brainly.com/question/491373

#SPJ11

Concentration of Pb2+ in the anode compartment is 0.088 M
To answer this question, we'll need to use the Nernst equation, which relates the cell potential (emf) to the concentrations of the species involved in the redox reaction. The Nernst equation is:

E = E₀ - (RT/nF) * ln(Q)

Where E is the cell potential (emf, 0.21 V), E₀ is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (assumed to be 298 K), n is the number of electrons transferred in the redox reaction (2 for Sn and Pb), F is Faraday's constant (96485 C/mol), and Q is the reaction quotient, which is the ratio of the concentrations of products to reactants.

For the Sn2+/Pb2+ system, the standard cell potential (E₀) is given by the difference in their standard reduction potentials:

E₀(Sn2+/Pb2+) = E₀(Sn2+) - E₀(Pb2+)

To solve for the concentration of Pb2+ in the anode compartment, we need to rearrange the Nernst equation to find Q:

Q = exp(nF(E - E₀)/RT)

As we are given the concentration of Sn2+ (1.30 M), and we know the stoichiometry of the redox reaction, we can express Q as:

Q = [Pb2+] / [Sn2+]

Now, we can solve for [Pb2+]:

[Pb2+] = Q * [Sn2+] = exp(nF(E - E₀)/RT) * [Sn2+]

Substituting the values into the equation above, we get:

[Pb2+]/1.30 = exp[(0.01 - 0.21) * (2 * 96485 / (8.314 * 298))]

Solving for [Pb2+], we get:

[Pb2+] = 0.088 M

Therefore, the concentration of Pb2+ in the anode compartment is 0.088 M.

Once you have the values for E₀(Sn2+) and E₀(Pb2+), you can plug them into the equation along with the given values to find the concentration of Pb2+ in the anode compartment.

To know more about Electrochemical cell:

https://brainly.com/question/25749323

#SPJ11

Approximately 91.2 calories of heat are needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C.

To calculate the heat in calories needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C, we'll use the specific heat formula and convert Joules to calories. The formula is:

q = m * C * ΔT

where q represents the heat absorbed, m is the mass of the substance (in grams), C is the specific heat capacity (in J/g°C), and ΔT is the change in temperature (in °C).

Step 1: Calculate the change in temperature (ΔT).
ΔT = Final temperature - Initial temperature
ΔT = 41.0°C - 17.5°C
ΔT = 23.5°C

Step 2: Use the specific heat formula.
q = m * C * ΔT
q = 125.0g * 0.130J/g°C * 23.5°C
q = 381.625J

Step 3: Convert Joules to calories.
1 calorie = 4.184 Joules
q = 381.625J / 4.184J/cal
q ≈ 91.2 calories

So, approximately 91.2 calories of heat are needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

The covalent radius of atom X in an XY molecule with a bond length of 212 and covalent radius of Y atom being 93 is 119.

To find the covalent radius of atom X, we need to understand that the bond length of an XY molecule is equal to the sum of the covalent radii of atoms X and Y. We can represent this relationship using the formula: bond length = covalent radius of X + covalent radius of Y.

Given that the bond length of the XY molecule is 212, and the covalent radius of Y is 93, we can use the formula to find the covalent radius of X:

212 = covalent radius of X + 93

To find the covalent radius of X, we can simply subtract the covalent radius of Y from the bond length:

covalent radius of X = 212 - 93

covalent radius of X = 119

So, the covalent radius of atom X is 119.

To know more about covalent radius click on below link:

https://brainly.com/question/14656068#

#SPJ11