what is the answer to this
Answer:
Explanation:
i may be wrong but i think its b
Answer:
B Ndaira is right for real
As a team, determine the rules for naming binary ionic compounds that have a "special" transition metal in it when given the formula.
Answer:
Metal name (charge in roman numerals) Non metal
for example Iron (III) chloride
Explanation:
The rule for naming special transition metal are as follows -
a) First name the transition metal
b) Now write the name of the non metal in the chemical formula.
c) Write the charge for the non metal.
d) If there is a polyatomic ion, write the Common Ion Table ,its formula and charge.
e) Based on the total charge on the non-metal or polyatomic ion, deduce the total charge on the transition metal
f) Write the charge of transition metal after the name of metal in Roman Numeral in parentheses
How are the atomic number and the number of protons related to each other?
Answer:
Neutral atoms of each element contain an equal number of protons and electrons. The number of protons determines an element's atomic number and is used to distinguish one element from another. ... Together, the number of protons and the number of neutrons determine an element's mass number.
Explanation:
Do number 5 vote you brainlest thanks
Answer:
DNA
Explanation:
because genetics come from DNA
Calculate number of g H3PO3 formed from 53.6 g H2O react with excess PCl3?
PCl3 + H2O → HCl + H3PO3
81.3 g H₃PO₃
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Reaction Molar RatiosUsing Dimensional AnalysisExplanation:Step 1: Define
[RxN - Unbalanced] PCl₃ + H₂O → HCl + H₃PO₃
↓
[RxN - Balanced] PCl₃ + 3H₂O → 3HCl + H₃PO₃
[Given] 53.6 g H₂O
[Solve] x g H₃PO₃
Step 2: Identify Conversions
[RxN] 3 mol H₂O → 1 mol H₃PO₃
[PT] Molar Mass of H - 1.01 g/mol
[PT] Molar Mass of O - 16.00 g/mol
[PT] Molar Mass of P - 30.97 g/mol
Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol
Molar Mass of H₃PO₃ - 3(1.01) + 30.97 + 3(16.00) = 82.00 g/mol
Step 3: Stoich
[S - DA] Set up: [tex]\displaystyle 53.6 \ g \ H_2O(\frac{1 \ mol \ H_2O}{18.02 \ g \ H_2O})(\frac{1 \ mol \ H_3PO_3}{3 \ mol \ H_2O})(\frac{82.00 \ g \ H_3PO_3}{1 \ mol \ H_3PO_3})[/tex][S - DA] Multiply/Divide [Cancel out unit]: [tex]\displaystyle 81.3023 \ g \ H_3PO_3[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
81.3023 g H₃PO₃ ≈ 81.3 g H₃PO₃
Table sugar and salt are examples of? A. mixtures B. elements C. atoms D. compounds
Answer:
The answer is compound because they consist of multiple things.
If you were standing on a beach during the day time, what direction might you feel a
breeze from? Explain why this happens.
Answer:
hi
Explanation:
if your standing in the beach for like in hour and then the temp will start to drop your body heating will start to go down to .
3- Given 90.0 g C6H1206
a- How many moles of Glucose are present in 90.0 g of glucose?
molar mass = 180.18
//
[tex]90.0 \: g \times \frac{1 \: mol}{180.18 \: g} = 0.4995004995 \: mol[/tex]
[tex] = 0.500 \: mol[/tex]
Why is sterilising the water rarely used in treating the sewage water?
Answer:
Sterilizing the water rarely used in treating the sewage water is described below in details.
Explanation:
Sterilization is the application of a chemical or physical system to eradicate all microorganisms, concluding comprehensive amounts of bacterial content. Heat treatment is the most relevant approach for the sterilization of waste-water that accommodates large levels of masses. well now sterilizing the water is un-usually practiced in managing the sewage water.
Katrina inserts a key into her car’s ignition. She turns the key, putting her car into ignition mode. In this mode, some energy is used to increase the temperature of the car’s fuel. This energy allows the fuel to combust and the car to move. What’s this energy called?
A.
absorbed energy
B.
activation energy
C.
chemical energy
D.
released energy
E.
solar energy
Answer:
B
Explanation:
Answer:
the correct answer is B
Explanation:
When talking about the products of photosynthesis, why is it a HUGE issue when a vast amount of the rainforests is dying along with vast amounts of forests from fires/deforestation? Remember, we know that this hurts the ecosystems of animals living there, but what else does it effect?
Question 5 options:
the creation of oxygen
the creation of too much smoke
the creation of carbon monoxide
the creation of carbon dioxide
Answer:
the creation of oxygen.
Explanation:
How many grams of H,O are needed to produce 13 g of NaOH? 2 Na,O2 + 2 H20-4 NaOH + O2
Answer:
This is a typical stoichiometry question.To answer this question you want to get a relationship between
N
a
2
O and NaOH.
So you can get a relationship between the moles of
N
a
2
O
and moles of NaOH by the concept of stoichiometry.
N
a
2
O +
H
2
O ----------------> 2 NaOH.
According to above balanced equation we can have the stoichiometry relationship between
N
a
2
O and NaOH. as 1:2
It means 1 moles of
N
a
2
O is required to react with one mol of
H
2
O to produce 2 moles of NaOH.
in terms of mass 1 mole of
N
a
2
O has mass 62 g on reaction with water produces 2 moles of NaOH or 80 g of NaOH.
62 g of
N
a
2
O produces 80 g of NaOH.
1g of NaOH is produced from 62/80 g of
N
a
2
O
1.6 x
10
2
g of NaOH will require 62 x 1.6 x
10
2
g / 80 of
N
a
2
O
124g of
N
a
2
O.
Explanation:
In the reaction 2CO2+ 2H2O -> C2H4 + 3O2 , the mole ratio of water to oxygen is
I'm gonna guess 2:3 because you have two moles of water and three moles of oxygen
What molecular geometry would be expected for BF3 and NH3?
Answer:
Boron trifluoride would have a trigonal planar geometry.Ammonia would have a trigonal pyramidal geometry.Explanation:
There are three valence electrons in a boron atom.
In boron trifluoride, the central boron atom did not achieve an octet with eight valence electrons. Rather, that boron atom would be electron deficient with only six valence electrons.
Each of the three fluoride atoms would have shared one valence electron with that boron atom, with a total of three boron-fluorine single bonds. On the other hand, all three of the valence electrons of that boron atom would be involved in bonding. Hence, there would be no extra valence electrons to act as lone pairs on that boron atom.
Hence, the central boron atom would have three electron domains (one for each boron-fluorine bond) with none of the electron domains coming from lone pairs. By the VSEPR theory, the geometry of the molecule would be trigonal planar. All four atoms in this molecule would be in the same plane.
There are five valence electrons in a nitrogen atom.
In ammonia, the central nitrogen atom is indeed able to achieve an octet (with eight valence electrons in total.) Three of the five valence electrons of nitrogen would form a total of three hydrogen-nitrogen bonds. The other two valence electrons would form a lone pair.
Hence the central nitrogen atom would have four electron domains (one for each of the three hydrogen-nitrogen bond, and one for the lone pair.) Hence, by the VSEPR theory, the geometry of this molecule would be trigonal pyramidal.
What feature of the sun changes to create the solar cycle?
a
Brightness
Hydrogen gas
Nuclear fusion
Magnetic field
Which type of model is described below? A scientist thinks of the inside of a tree as being like a giant straw that can suck up water A. Atomic model B. Physical model C. Mathematical model D. Conceptual model
Answer:
B. Physical model
Explanation:
Out of the four of them this is the one that makes the most sense
Increasing an airplane's speed or wing size does which of the following? O A. Creates a sonic boom B. Generates more lifting force O C. Increases the gravitational pull on the plane D. Decreases the amount of drag acting on the plane SUBMIT
Answer: B: generates more lifting force.... just got it correct
Explanation:
Answer:
B. Generates more lifting force
Explanation:
i took the quiz on Ap*x and it was correct
How many moles of Al would be produced from 20 moles of Al2O3?
2Al2O3
->
4A1 + 302
[tex]\displaystyle 40 \ mol \ Al[/tex]
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] 2Al₂O₃ → 4Al + 3O₂
[Given] 20 mol Al₂O₃
Step 2: Identify Conversions
[RxN] 2 mol Al₂O₃ → 4 mol Al
Step 3: Stoich
[DA] Set up: [tex]\displaystyle 20 \ mol \ Al_2O_3(\frac{4 \ mol \ Al}{2 \ mol \ Al_2O_3})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 40 \ mol \ Al[/tex]Step 4:Check
Follow sig fig rules and round. We are given 1 sig fig.
Since our final answer already has 1 sig fig, there is no need to round.
Which statement about an object in motion is correct?
Help
What are the elements in group two called
Answer: Alkaline-earth metal, any of the six chemical elements that comprise Group 2 (IIa) of the periodic table. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). Hopefully i helped
Explanation:
Answer: Alkaline-earth metal
Explanation:
lithium electron configuration
Answer:
Dalam fisika atom dan kimia kuantum, konfigurasi elektron adalah susunan elektron-elektron pada sebuah atom, molekul, atau struktur fisik lainnya. Secara formal, keadaan kuantum elektron tertentu ditentukan oleh fungsi gelombangnya, yaitu sebuah fungsi ruang dan waktu yang bernilai kompleks.
#semogamembantu
how many molecules are there in 1.5 mol of methane
Answer: A mole of something means that there are 6.02 X 10^23 of that something. So, a mole of methane molecules is 6.02 X 10^23 methane molecules. So, 1.5 moles of methane will contain 1.5*(6.02 X 10^23) = 9.0 X 10^23 methane molecules
Explanation:
According to the enthalpy diagram below, which of the following statements is true?
Arrows A and D represent the enthalpy of the intermediate chemical reactions.
Arrow C represents the enthalpy of the overall chemical reaction.
Arrow C indicates that the third intermediate reaction is exothermic.
Arrow B indicates that the second intermediate reaction is exothermic.
According to the enthalpy diagram true statement is that Arrow C indicates that third intermediate reaction is exothermic in nature.
What is enthalpy of reaction?Enthalpy of the reaction gives idea about the exchange of heat during the whole chemical reaction process.
Arrow A and Arrow B represents that first and second intermediate reaction is endothermic.Arrow C indicates that third intermediate reaction is exothermic in nature.Hence Arrow C indicates that the third intermediate reaction is exothermic is true statement.
To know more about enthalpy, visit the below link:
https://brainly.com/question/14291557
#SPJ2
Answer: c
Explanation:
what's the formula for hypoarsenous acid?
Answer:
As(OH)3 or AsH3O3
Explanation:
Which of the following is the correct definition of partial pressure *
A) The total pressure exerted by all gases in the mixture
B) The contribution each gas in a mixture makes to the total pressure
C) The space occupied a gas in the mixture
D) The amount of gas particles present in a mixture
Answer:A
Explanation:
How much 2.0 M NaCl solution would you need to make 250 mL of 0.15 M NaCl solution?
Answer:
18.75 mL
Explanation:
(M1)(V1)=(M2)(V2)
(2.0 M)(V1)=(0.15 M)(250 mL)
(2.0)(V1)=37.5
Divide 2.0 on both sides
V1=18.75 mL
Identify this reaction.
NH3 + H2SO4 → (NH4)2SO4
O decomposition
O synthesis
O double displacement
O single displacement
Answer: synthesis
Explanation:
Answer:
Synthesis
Explanation:
Two compounds combine to produce one compound
Use the following chemical equation to answer the question. 4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, what is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas?
A) 9.96 grams of K2O
B) 14.5 grams of K2O
C) 28.9 grams of K2O
D) 57.8 grams of K2O
Answer:14.5 grams of K2O
Explanation:
4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, 14.5 grams of K2O is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas. Therefore, option B is correct.
What is theoretical yield ?The yield of a reaction is used to represent how much of a product is produced from that reaction. The theoretical yield is the quantity of product that stoichiometry predicts will be produced, whereas the actual yield is the amount that is actually produced.
Divide the ratio by the limiting reactant's molecular weight. The answer is the theoretical yield of the desired product in moles.
It is useful to know how much product will be created with specific reactant amounts before carrying out chemical reactions. The theoretical yield is what is meant by this. This method can be applied to determine the theoretical yield of a chemical reaction.
Thus, option B is correct.
To learn more about theoretical yield, follow the link;
https://brainly.com/question/175584
#SPJ2
Se queman 87,0 g de butano con oxígeno produciéndose dióxido de carbono y agua. Calcular la masa de oxígeno necesaria y la masa de dióxido de carbono y de agua que se desprenderá
Answer:
312g O₂ son necesarios, se producen 264g CO₂ y 135g H₂O
Explanation:
La combustión de butano para producir CO₂ y H₂O ocurre así:
C₄H₁₀ + 13/2O₂ → 4CO₂ + 5H₂O
Donde 1 mol de butano reacciona con 13 moles de oxígeno para producir 4 moles de dióxido de carbono y 5 moles de agua.
Para resolver este problema debemos convertir la masa de butano a moles y, usando la reacción balanceada, obtener cuánto se necesita de oxígeno y cuánto se produciría de dióxido de carbono y agua:
Moles butano -Masa molar: 58.12g/mol-:
87.0g * (1mol / 58.12g) = 1.50 moles
Moles y masa de oxígeno necesarias para la reacción -Masa molar: 32g/mol-:
1.50 moles C₄H₁₀ * (13/2 moles O₂ / 1 mol C₄H₁₀) = 9.75 moles * (32g/mol) =
312g O₂ son necesarios
Moles y masa de dióxido de carbono producidas -Masa molar: 44.01g/mol-:
1.50 moles C₄H₁₀ * (4 moles CO₂ / 1 mol C₄H₁₀) = 6 moles * (44.01g/mol) =
264g CO₂ se producen
Moles y masa de agua producidas -Masa molar: 18.015g/mol-:
1.50 moles C₄H₁₀ * (5 moles H₂O / 1 mol C₄H₁₀) = 7.5 moles * (18.015g/mol) =
135g H₂O se producen
Pliss help
A)random change
B)natural selection
C) artificial selection
D)inbreeding
And why
Answer: I believe it is artificial selection (not certain though)
Explanation: modern day dogs have been bread an domesticated to be used by humans in ways we see fit.
