Name the 3 methods to accomplish cis-dihydroxylation

Answer:

False

Explanation:

The primary source for the rising carbon dioxide levels is not respiration of the Earth's growing population. Carbon dioxide is primarily released into the atmosphere through the burning of fossil fuels such as coal, oil, and gas, as well as through deforestation and land use changes. While human respiration does release CO2 into the atmosphere, it is a much smaller factor compared to the other sources mentioned above. The amount of CO2 released by human respiration is balanced by the amount absorbed by plants during photosynthesis.

The percent composition of the herbicide is 44.5% C, 6.27% H, 22.9% Cl, and 26.4% N.

To solve this problem, we will use the information provided to calculate the percent composition of the herbicide.

First, let's calculate the number of moles of CO2 and H2O produced by the combustion of the herbicide. We can use the ideal gas law to do this:

n_CO2 = (156.9 mL) / (22.4 L/mol) * (1 mol CO2 / 1 L) = 7.00 mol CO2

n_H2O = (91.52 mL) / (22.4 L/mol) * (1 mol H2O / 1 L) = 4.08 mol H2O

Next, let's calculate the number of moles of carbon, hydrogen, and nitrogen in the herbicide using the combustion reaction:

C_xH_yCl_zN_w + (x + y/4 - z/2) O2 → x CO2 + (y/2) H2O + z HCl + w NO2

From the balanced equation, we can see that the number of moles of CO2 produced is equal to the number of moles of carbon in the herbicide, and the number of moles of H2O produced is equal to the number of moles of hydrogen in the herbicide.

We can use this information to solve for the number of moles of carbon, hydrogen, and nitrogen in the herbicide:

n_C = 7.00 mol CO2

n_H = 8.16 mol H2O

n_Cl = 41.36 mg / 35.45 g/mol / 0.1500 g = 0.767 mol Cl

Since the herbicide contains no other elements besides C, H, Cl, and N, we can assume that the mass of the herbicide is equal to the sum of the masses of these elements. We can use this information to solve for the mass of the herbicide:

m_Herbicide = m_C + m_H + m_Cl + m_N

m_Herbicide = n_C * 12.01 g/mol + n_H * 1.008 g/mol + n_Cl * 35.45 g/mol + n_N * 14.01 g/mol

We can rearrange this equation to solve for the percent composition of the herbicide:

% C = (n_C * 12.01 g/mol / m_Herbicide) * 100% = 44.5%

% H = (n_H * 1.008 g/mol / m_Herbicide) * 100% = 6.27%

% Cl = (n_Cl * 35.45 g/mol / m_Herbicide) * 100% = 22.9%

% N = ((m_Herbicide - n_C * 12.01 g/mol - n_H * 1.008 g/mol - n_Cl * 35.45 g/mol) / m_Herbicide) * 100% = 26.4%

to know more about herbicides refer here:

https://brainly.com/question/31375814#

#SPJ11

The correct name for HIO3 is iodic acid. HIO3 is an oxyacid, which means it consists of hydrogen, oxygen, and a central non-metal element, in this case, iodine. The correct option is D).

Oxyacids generally have a structure where the central non-metal element is surrounded by oxygen atoms, which are then connected to hydrogen atoms.

In the case of HIO3, the central element is iodine, and the oxyanion is the iodate ion (IO3-). When naming oxyacids, the "-ate" ending of the oxyanion is replaced with "-ic," followed by the word "acid." Therefore, the name for HIO3 is derived from the iodate ion and becomes iodic acid.

It is essential to distinguish iodic acid from other similar compounds.

Option A) hydroiodic acid refers to HI, a binary acid consisting of hydrogen and iodine without oxygen.

Option B) hydroiodus acid is not a recognized name for any compound.

Option C) iodate acid is an incorrect name for HIO3, as oxyacids should have the "-ic" ending.

Option E) periodic acid refers to HIO4, a different oxyacid with one more oxygen atom than iodic acid.

Thus, D. iodic acid is the correct option.

For more such questions on Oxyacids.

https://brainly.com/question/8837281#

#SPJ11

The BLU-113A/B serves as the warhead for the GBU-28A/B and B/B. It is a penetrator bomb designed to penetrate hardened targets, such as underground bunkers and tunnels. The GBU-32 uses a different type of warhead, the BLU-109, which is also designed for penetrating targets.

The CBU-107 is a cluster bomb that disperses smaller bomblets, while the GBU-15(V)1/B is a guided bomb with a different type of warhead.

The BLU-109/B bomb is constructed with a thick, high-strength steel casing that enables it to withstand the extreme forces that occur during impact. The bomb typically features fins or wings that provide stability during flight and help guide it towards the intended target. When the bomb is released, it freefalls towards the target until it reaches the desired altitude, at which point the guidance system activates and steers the bomb towards the target.

To know more about BLU-109/B bomb:

https://brainly.com/question/31604457

#SPJ11

Create vapor pressure is behind because the molecules that leave the liquid during evaporation.

What is evaporation ?

The water cycle's crucial step is evaporation. When a liquid transforms into a gas, evaporation takes place. As rain puddles "disappear" on a hot day or when wet clothing dries in the sun, it is simple to envision. The liquid water in these instances is evaporating into a gas known as water vapor rather than actually dissipating.

What is kinetic energy ?

When an item undergoes work—the transfer of energy—by being subjected to a net force, it accelerates and acquires kinetic energy.

Therefore, Create vapor pressure is behind because the molecules that leave the liquid during evaporation.

Learn more about evaporation from the given link.

https://brainly.com/question/2013258

#SPJ1

The correct electron configuration of the ion formed by sulfur is [Ne]3s²3p⁶. The answer is a.

Sulfur has an atomic number of 16, which means a neutral sulfur atom has 16 electrons distributed in its electron shells. The electron configuration of a neutral sulfur atom is [Ne]3s²3p⁴, indicating that there are two electrons in the 3s subshell and four electrons in the 3p subshell.

When sulfur forms an ion, it typically gains two electrons to achieve a stable octet configuration, forming the S²⁻ ion. The addition of two electrons to the 3p subshell results in the electron configuration of [Ne]3s²3p⁶ for the S²⁻ ion.

It is important to note that the electron configuration of an ion reflects the number and arrangement of electrons in the ion's valence shell, which can differ from that of the neutral atom.

To know more about electron configuration, refer here:
https://brainly.com/question/29157546#
#SPJ11

If the solvent and solute are present in equal amounts in a solution, the solvent is still considered to be the substance that is capable of dissolving the solute.

A solvent is a substance that dissolves the solute and forms the solution. Even if the two substances are present in equal amounts, the solvent is still playing an active role in dissolving the solute. The substance known as the solvent is typically what determines whether a solution is in a solid, liquid, or gaseous state. The product that the solvent dissolves is known as the solute. A solvent is capable of dissolving the solute to form a solution and the solute is the substance that dissolves in a solvent giving rise to a solution.

To learn more about solvent-solute interactions, visit: https://brainly.com/question/14797683

#SPJ11

The percent yield for the reaction is approximately 50.1%. The correct answer is option D.

To determine the percent yield for this reaction, we'll first find the limiting reactant and then calculate the theoretical yield. Finally, we'll compare the theoretical yield to the actual yield (22.5 g of aluminum) to find the percent yield.

1. Calculate moles of reactants:
Al2O3: 60.0 g / (2 × 26.98 g/mol + 3 × 16.00 g/mol) ≈ 1.000 mol
C: 30.0 g / 12.01 g/mol ≈ 2.498 mol

2. Identify limiting reactant:
Since the stoichiometry is Al2O3 + 3C, we'll divide the moles of carbon by 3 and compare it to the moles of aluminum oxide:
(2.498 mol C) / 3 ≈ 0.833 mol
Since 0.833 mol < 1.000 mol, carbon is the limiting reactant.

3. Calculate theoretical yield:
Using the stoichiometry (2 mol Al produced per 3 mol C), we can calculate the theoretical yield of aluminum:
(2/3) × 2.498 mol C ≈ 1.665 mol Al
1.665 mol Al × 26.98 g/mol ≈ 44.9 g Al

4. Calculate percent yield:
Percent yield = (actual yield / theoretical yield) × 100
= (22.5 g Al / 44.9 g Al) × 100 ≈ 50.1%

For this reaction the percent yield  is approximately 50.1%,

so the correct answer is D) 50.1%.

For more such questions on percent yield, click on:

https://brainly.com/question/14714924

#SPJ11

The photon will absorb the remaining energy because its frequency and wavelength match the extra energy.

The term radiation refers to energy which could be ionizing in nature. It consists of high frequency photons that move at the speed of light.

If radiation hits you that has more energy than required to emit an electron, the additional energy will be transferred to the emitted electron as kinetic energy.

This means that the electron will be emitted with a higher velocity (or speed) than if it had just enough energy to be emitted, but the electron itself will not gain any additional energy beyond that. The remaining energy will be carried away by the photon as its frequency and wavelength will correspond to the excess energy.

Learn more about radiation on:

https://brainly.com/question/27858777

#SPJ11

To determine which 0.100 m solution will have the lowest vapor pressure, we need to consider the number of solute particles each substance will produce when dissolved in water. The more solute particles present, the lower the vapor pressure.

a. Sucrose: Since it is a non-electrolyte, it will not dissociate in water. Number of particles produced = 1.

b. Al(ClO₄)₃: When dissolved, it will dissociate into 1 Al³⁺ ion and 3 ClO₄⁻ ions. Number of particles produced = 1 + 3 = 4.

c. NaCl: When dissolved, it will dissociate into 1 Na⁺ ion and 1 Cl⁻ ion. Number of particles produced = 1 + 1 = 2.

d. KClO₄: When dissolved, it will dissociate into 1 K⁺ ion and 1 ClO₄⁻ ion. Number of particles produced = 1 + 1 = 2.

e. Ca(ClO₄)₂: When dissolved, it will dissociate into 1 Ca²⁺ ion and 2 ClO₄⁻ ions. Number of particles produced = 1 + 2 = 3.

The 0.100 m solution of Al(ClO₄)₃ (option b) will have the lowest vapor pressure, as it produces the highest number of solute particles (4) when dissolved in water.

To know more about Solute :

https://brainly.com/question/13812915

#SPJ11

In a lead storage battery, a redox reaction occurs between the lead oxide and the lead on the electrodes. During discharge, the lead oxide on the positive electrode reacts with the sulfuric acid electrolyte to form lead sulfate and water, while electrons are released.

Here are some additional points about the redox reaction in lead storage batteries:

At the same time, lead on the negative electrode reacts with the sulfate ions in the electrolyte to form lead sulfate and more electrons. The released electrons then flow through the external circuit, powering a device, before returning to the battery through the positive electrode.

Learn More About storage battery

https://brainly.com/question/9835043

#SPJ11

The carbon atom bonded to both the ring oxygen atom and a hydroxyl group is known as anomeric carbon.

In organic chemistry, the anomeric carbon is the carbon atom in a cyclic hemiacetal or hemiketal that is bonded to both an oxygen atom and a hydroxyl group. In the case of carbohydrates, the anomeric carbon is typically the carbon atom that was involved in the carbonyl group of the parent aldehyde or ketone prior to the formation of the cyclic hemiacetal or hemiketal.

The anomeric carbon is important in carbohydrate chemistry because it is often involved in glycosidic bond formation, which is how carbohydrates are linked together to form larger structures like polysaccharides. The configuration of the anomeric carbon (alpha or beta) also affects the physical and chemical properties of carbohydrates, including their solubility, reactivity, and biological activity.

You can learn more about anomeric carbon at

https://brainly.com/question/13265196

#SPJ11

Using the molarity formula, there are 0.00765 moles of LiI in 258.6 mL of 0.0296 M LiI solution.

Convert the given volume of 258.6 mL to liters by dividing by 1000: 258.6 mL ÷ 1000 mL/L = 0.2586 L. Use the molarity formula, M = moles of solute/liters of solution, to calculate the moles of LiI in the solution: 0.0296 M = moles of LiI / 0.2586 L

Rearranging the formula to solve for moles of LiI, we get moles of LiI = M x liters of the solution then moles of LiI = 0.0296 mol/L x 0.2586 L and moles of LiI = 0.00764576 mol. Round the answer to the appropriate number of significant figures, which in this case would be 3 since the given molarity has 3 significant figures: moles of LiI = 0.00765 mol.

Learn more about the moles at

https://brainly.com/question/26416088

#SPJ4

Nonmetals are found in the periodic table on the right side (Option A).

Nonmetals are the elements which form negative ions by accepting or gaining electrons. Non-metals usually have 4, 5, 6 or 7 electrons in their outermost shell. Characteristic properties of nonmetals are high ionization energies and high electronegativity. Owing to these properties, non-metals usually gain electrons when react with other compounds, forming covalent bonds. Nonmetals are generally located in Groups 14-18, with the exception of hydrogen, which is found in Group 1.

Learn more about nonmetals: https://brainly.com/question/2273750

#SPJ11

A common non-repetitive irregularity found in anti-parallel beta sheets is known as a beta bulge. It occurs when there is a local distortion in the beta-sheet caused by a small number of amino acid residues that deviate from the normal hydrogen bonding pattern.

This deviation causes a slight kink or bends in the beta sheet, resulting in a bulge in the structure. Beta bulges are often caused by the presence of amino acids with bulky side chains or those that cannot form hydrogen bonds as expected.

They are found in various proteins, including enzymes and structural proteins, and can have functional implications. For example, beta bulges can help to stabilize protein structures, create binding sites for ligands or substrates, or facilitate protein-protein interactions.

The study of beta bulges is important in understanding protein structure and function, and their role in disease states.

To know more about amino acid refer here:

https://brainly.com/question/28409615#

#SPJ11

The concentration of sodium formate in the buffer solution is 2.93 x [tex]10^{-3}[/tex] M.

To find the concentration of sodium formate in the buffer solution, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([NaCOOH] / [HCOOH])

Substituting the given values:

4.358 = 3.77 + log([NaCOOH] / 0.00750)

0.588 = log([NaCOOH] / 0.00750)

[NaCOOH] / 0.00750 = 3.91 x [tex]10^{-1}[/tex]

[NaCOOH] = 0.00750 x 3.91 x [tex]10^{-1}[/tex] = 2.93 x [tex]10^{-3}[/tex] M

Therefore, the concentration of sodium formate in the buffer solution is 2.93 x [tex]10^{-3}[/tex] M.

To know more about Henderson-Hasselbalch, refer here:

https://brainly.com/question/13423434#

#SPJ11

The major source of radon in houses in the United States is from the underlying bedrock, not from furniture or carpet. Fuel combustion may also contribute.

The significant wellspring of radon in houses in the US is the hidden bedrock. Radon is a radioactive gas that is delivered normally in the World's outside, and it can saturate structures through breaks and holes in the establishment.

This is especially normal in regions with stone or different sorts of rock that have a high centralization of uranium. Furniture and rugs are not huge wellsprings of radon, nor is the lower atmosphere.

Thermal energy stations really do deliver modest quantities of radon, however this is definitely not a significant wellspring of openness for the vast majority. Petroleum product ignition can likewise deliver radon, however this is certainly not a significant wellspring of openness in the US.

To learn more about fuel combustion, refer:

https://brainly.com/question/28114072

#SPJ4

The purpose of adding anhydrous MgSO4 to the ether solution is to remove any remaining water from the solution. Water can interfere with the reaction or extraction process and cause unwanted side reactions or impurities. If this step were omitted, the presence of water in the ether solution could lead to undesirable results.

Anhydrous MgSO4 is a powerful desiccant that can absorb the water molecules from the solution, leaving it dry and free of moisture.

Water can react with some of the reagents or products, altering the yield or purity of the final product. Additionally, water can promote the growth of bacteria or other microorganisms in the solution, which can cause contamination and affect the safety of the process.

Therefore, adding anhydrous MgSO4 is an essential step in many chemical reactions and extractions that require a dry environment. It ensures that the solution is free of water and ready for the next step in the process.

To know more about anhydrous MgSO4 refer here:

https://brainly.com/question/8691104#

#SPJ11

Two or more substances in variable proportions, where the composition is variable throughout, is considered as Heterogeneous mixture.

The correct answer is:

e. a heterogeneous mixture

Two or more substances in variable proportions, where the composition is variable throughout, is considered a heterogeneous mixture. In a heterogeneous mixture, the substances are not evenly distributed and can be separated easily. Examples of heterogeneous mixtures include sand and water, oil and water, and salad.

To know more about Heterogeneous mixture:

https://brainly.com/question/5924138

#SPJ11

The calculated density (12.58 g/mL) is very close to the density of silver (12.59 g/mL). Therefore, the metal is likely to be silver.

To calculate the density of the metal with mass = 33.03 g and volume = 2.624 mL, you can use the formula:

Density = Mass / Volume

Step 1: Plug in the given values into the formula:
Density = 33.03 g / 2.624 mL

Step 2: Calculate the density:
Density ≈ 12.58 g/mL

Now, compare the calculated density with the given densities of the coinage metals:
- Copper = 8.95 g/mL
- Silver = 12.59 g/mL
- Gold = 19.32 g/mL

To know more about the density refer here :

https://brainly.com/question/29009519#

#SPJ11

Answer: False

Explanation:

This statement is not entirely accurate. The endocrine system is a complex network of glands that secrete hormones into the bloodstream to regulate and control the activities of various tissues and organs in the body. Unlike the nervous system, which sends nerve impulses to specific cells or tissues to trigger a response, the endocrine system uses hormones to communicate with cells throughout the body.

Hormones are chemical messengers that travel through the bloodstream and bind to specific receptors on target cells, triggering a response. These responses can be slow and long-lasting, allowing the endocrine system to regulate many processes in the body, including growth and development, metabolism, reproductive functions, and stress responses.

6) The grams of the O₂ are used to produce 0.72 L of CO₂ gas at standard the temperature and the pressure is 0.10 g.

7) If 73 g of the aluminum chloride decomposes, the molecules of chlorine gas is 3.25 × 10²² molecules.

6) The chemical equation is as :

C₃H₈ +    5O₂    ---->   3CO₂  +  4H₂O

The ideal gas is as :

P V = n R T

Where,

The Pressure, P = 1 atm

The temperature, T = 273 K

The volume, V = 0.72 L

The gas constant, R = 0.823 L atm K⁻¹mol⁻¹

The moles, n = ?

n = P V / R T

n = ( 1 × 0.72 ) / 0.823 × 273

n = 0.0032 mol

The mass of the O₂ = moles × molar mass

The mass of the O₂ = 0.0032 × 32

The mass of the O₂ = 0.10 g

7) The chemical equation is :

2AICl₃ --> 2Al+ 3Cl₂

The mass of the AICl₃ = 73 g

The number of the moles of the AICl₃ = mass / molar mass

The number of the moles of the AICl₃ = 73 / 133.33

The number of the moles of the AICl₃ = 0.54 mol

The number of the molecules = 0.54 × 6.022 × 10²²

The number of the molecules of the AICl₃ = 3.25 × 10²² molecules.

To learn more molecules here

https://brainly.com/question/22860094

#SPJ4

The required ratio of the concentration of acetate ([base]) to acetic acid ([acid]) in the buffer system at pH 4.208 is 0.318.

This means that for every molecule of acetic acid, there must be 0.318 molecules of acetate ions in the buffer solution.

The pH of a buffer system composed of a weak acid and its conjugate base can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([base]/[acid])

where pKa is the dissociation constant of the weak acid, [base] is the concentration of the conjugate base, and [acid] is the concentration of the weak acid.

We can rearrange this equation to solve for the ratio of [base]/[acid]:

[base]/[acid] = antilog(pH - pKa)

Substituting the given values, we get:

[base]/[acid] = antilog(4.208 - 4.752) = antilog(-0.544) = 0.318

to know more about buffer system refer here:

https://brainly.com/question/22821585#

#SPJ11

The mass of 2450 mL of ethanol with a specific gravity of 0.810 is 1984.5 grams.

The equation to calculate the mass (in grams) of a substance using its specific gravity (SG) and volume (in milliliters) in the SI system is:

Grams = milliliters × SG

For example, let's say you have 2450 mL of ethanol with a specific gravity of 0.810. To calculate the mass in grams, you would use the following equation:

Grams = 2450 mL × 0.810

Simplifying the equation, you get:

Grams = 1984.5 g

Therefore, the mass of 2450 mL of ethanol with a specific gravity of 0.810 is 1984.5 grams.

Learn more about  gravity

https://brainly.com/question/31321801

#SPJ4

The volume of 0.3000 M HCl required to contain 1.5000 g of HCl is b. 139 ml.

To calculate the volume of 0.3000 M HCl required to contain 1.5000 g of HCl.

we need to use the equation:

n = m/MW

Where n is the number of moles, m is the mass in grams, and MW is the molecular weight of HCl.

First, we need to calculate the number of moles of HCl in 1.5000 g of HCl:

n = 1.5000 g / 36.0 g/mol = 0.04167 mol

Next, we can use the equation:

C = n/V

Where C is the concentration in M, n is the number of moles, and V is the volume in liters.

Rearranging the equation, we get:

V = n/C

Plugging in the values, we get:

V = 0.04167 mol / 0.3000 mol/L = 0.1389 L

To convert liters to milliliters, we multiply by 1000:

V = 0.1389 L x 1000 mL/L = 138.9 mL

Therefore, the volume of 0.3000 M HCl required to contain 1.5000 g of HCl is 138.9 mL.

In summary, we used the mass of HCl and its molecular weight to calculate the number of moles. Then, we used the concentration of the HCl solution and the number of moles to calculate the volume of the solution required to contain the given mass of HCl. Therefore, the correct answer is option b.

know more about volume here:

https://brainly.com/question/463363

#SPJ11

Answer:

A. Single replacement

Explanation:

Na replaces Mg as the cation

The molar mass of Ba(ClO4)2 is 336.23 g/mol. The correct option is A.

To calculate the molar mass of Ba(ClO4)2, we need to add the atomic masses of all the elements present in the compound.

Ba(ClO4)2 contains barium (Ba), chlorine (Cl), and oxygen (O).

The atomic mass of barium is 137.33 g/mol.

The atomic mass of chlorine is 35.45 g/mol, but in this compound, it is present as a polyatomic ion (ClO4). The molecular mass of ClO4 is (35.45 + 4x16.00) = 99.45 g/mol.

Since there are two ClO4 ions in the compound, we need to multiply the molecular mass of ClO4 by 2:

2 x 99.45 g/mol = 198.90 g/mol

Now we can add the atomic masses of all the elements:

137.33 g/mol + 198.90 g/mol = 336.23 g/mol

Therefore, the molar mass of Ba(ClO4)2 is 336.23 g/mol, option A.

For more such questions on Molar mass.

https://brainly.com/question/22997914#

#SPJ11

Answer:

0.24

Explanation:

Rounding to the nearest gram, the answer is A) 310.

The balanced chemical equation is:

[tex]3Ca(NO_{3} )_{2}[/tex] + 2 Li3PO4 -> 6 LiNO3 + Ca3(PO4)2

The stoichiometry of the reaction shows that 3 moles of [tex]Ca(NO_{3} )_{2}[/tex]  react with 2 moles of Li3PO4 to produce 1 mole of Ca3(PO4)2.

Given that 3.40 moles of [tex]Ca(NO_{3} )_{2}[/tex]  and 2.40 moles of Li3PO4 are present, we can use the stoichiometry of the reaction to determine which reactant is limiting:

For [tex]Ca(NO_{3} )_{2}[/tex] : 3.40 moles [tex]Ca(NO_{3} )_{2}[/tex] x (1 mole Ca3(PO4)2 / 3 moles [tex]Ca(NO_{3} )_{2}[/tex] = 1.13 moles Ca3(PO4)2

For Li3PO4: 2.40 moles Li3PO4 x (1 mole Ca3(PO4)2 / 2 moles Li3PO4) = 1.20 moles Ca3(PO4)2

Since Li3PO4 produces more moles of Ca3(PO4)2 than [tex]Ca(NO_{3} )_{2}[/tex]  it is the limiting reactant. Therefore, the maximum amount of Ca3(PO4)2 that can be produced is 1.20 moles.

The molar mass of Ca3(PO4)2 is 310.18 g/mol. Therefore, the theoretical yield of Ca3(PO4)2 is:

1.20 moles x 310.18 g/mol = 372.216 g

Rounding to the nearest gram, the answer is A) 310.

Learn more about stoichiometry

https://brainly.com/question/30215297

#SPJ4

The equilibrium lies to the left, with Kc < 1, favoring the reactants.

The given reaction is:

NO3- + H2O ⇌ O2- + H2O

First, let's complete the reaction. We need to balance the reaction by adding an H+ ion to the products side:

NO3- + H2O ⇌ O2- + H2O + H+

Now, we need to determine if the equilibrium lies to the left (Kc < 1) or to the right (Kc > 1). To do this, we need to analyze the stability of the reactants and products. NO3- is a stable ion since it is a conjugate base of a strong acid, HNO3. On the other hand, O2- is a very strong base, making it less stable. Therefore, the equilibrium will likely favor the more stable reactant side:

NO3- + H2O ⇌ O2- + H2O + H+ (Kc < 1)

Learn more about equilibrium : https://brainly.com/question/19340344  

#SPJ11