Answer:
graphite
Explanation:
graphite is also good conductor of electricity
When a gas is heated, the gas particles have more kinetic energy. Complete the following sentence: This means they move about more and have more ______ with the sides of the container. This increases the pressure.
Answer:
Contact
Explanation:
As the speed of the particles increases, they move around more, which means they hit the sides of the container more.
Write a net ionic equation for the neutralization reaction of acid with a hydroxide base. (Include phase symbols)
Answer:
salt + water. It is called the ionic equation for neutralisation. the acid to form a salt solution.
Explanation:
So what you end up with is you always end up H+ plus OH- yields H2O, because HCl, and NaOH, since they're strong, they fully dissociate. So the Na+, and the Cl - are spectator ions. So with a strong acid and strong base, the net ion equation is always H+ plus OH- yields H2O.
examine the diagram of the cell which or general is marked with an X help
Answer:
I'm pretty sure it's the cell membrane
Compound X has a molar mass of 104.01·gmol−1 and the following composition: element mass % nitrogen 26.93% fluorine 73.07% Write the molecular formula of X .
Answer: N2F4
Explanation:(NF2)x2 = N2F2
The compound X has a molar mass of 104.01·gmol−1 and the following composition: element mass % nitrogen 26.93% fluorine 73.07%, then the molecular formula of X is N2F4.
What is molecular formula?Molecular formula is defined as a chemical formula that give the total number of atoms of each elements in each molecule of a substance.
It can also be defined as a phrase that specifies the number of atoms of each element in a complex molecule.
It represents the actual number of each atom in a molecules.
It tells us which atoms and how many of each types of atoms are present in a molecule.
NF2 x 2 = N2F4
Thus, the compound X has a molar mass of 104.01·gmol−1 and the following composition: element mass % nitrogen 26.93% fluorine 73.07%, then the molecular formula of X is N2F4.
To learn more about molecular formula, refer to the link below:
https://brainly.com/question/28647690
#SPJ2
What type of music do people like
Answer:
pop, emotional, heart touching, freestyle and rap music is what I LOVE!!!!!
Which is evidence of climate-forced sea level rise submerging of low islands and coastlines decreased temperature of oceans temperature changes for surface currents increased carbon dioxide in the atmosphere
Answer: Ocean rise?
Explanation:
Answer:
submerging of low islands and coast lines
Explanation:
earth science climate change unit test
In your own words, write a definition for the term periodic.
Answer: The definition of periodic is something that is recurring at regular intervals, or happens from time to time. An example of periodic is a person's birthday happening once each year.
hope this helps y❣️
How many moles of silver atoms are in 3.88x10^20 atoms of silver
Answer:
100
ddExplanation:
Zinc chloride + Magnesium →
Answer:
im assuming you need the balanced equation
Explanation:
Zn + MgCl2 = ZnCl2 + Mg
Answer:
it will mgcl2 + zn
Explanation:
Mg will replace zn from its salt solution
to form mgcl2
hope it helps
WHAT IS THE PERCENT BY VOLUME OF ETHANOL IN A SOLUTION THAT CONTAINS 35 mL ETHANOL IN 115 mL OF WATER?
when HCl react with finely powdered iron it form ferrous chloride and not ferric chloride. why?
Answer:
When iron is allowed to react with HCl,
It produces hydrogen and the release of hydrogen gas prevents the formation of ferric chloride.
Hope it helps
Thank you
Please mark me as brainliest.
PLS HELP ME WITN THIS ILL GIVE BRAINLIEST
A chemical property of a substance is a certain characteristic that can only be observed by participating in a chemical reaction. Alternatively, a chemical property of a substance is something that can only be observed when the substance undergoes a chemical change.
I'm not sure what you're supposed to do with the first four boxes; all four are examples of chemical properties. Do you have to name the specific type of chemical property as given in the description? If so, the following would be my answers:
Flammability/Combustibility: The ability of a substance to burn.
The next two are quite strange; I'm not aware of a term that cleanly describes reactivity with water or acid. I suspect that, given the level of the material here, the general property of "reactivity" might be the answer for both the second and third descriptions
(Water-)reactivity: Some substances react when put in water.
(Acid-)reactivity: Some substances react when put in acid.
Light sensitivity: Light can interact with some things to form new substances.
As for the chart, I've filled it in as shown in the attached image. Please take care to double-check what I've written; in particular, when it comes to the property, I might have used a different term from what you were taught in class or provided in some other resource that I don't have access to. I've also color-coded qualitative/quantitative and physical/chemical for your convenience.
Which is a problem with using wind turbines to produce energy?
WA. Wind turbines are efficient only in certain areas.
A.
O C. Wind turbines produce a large amount of energy.
D. Wind turbines create a large amount of pollution.
B. Wind turbines occupy a small area of land.
Answer:
they are only efficient in certain areas
Explanation:
Wind turbine are efficient only in certain areas it is a problem with using wind turbines to produce energy.
What is Wind Turbine?Wind turbine convert the wind energy into the electricity. It is a power generating device that converts the kinetic energy in to electrical energy.
Now lets check all option one by one:
Option (A): Wind turbines are efficient only in certain areas it is a problem with using wind turbines to produce energy because the flow of air from areas of high pressure towards the lower pressure.
So, it is correct option.
Option (B): Wind turbines occupy a lot of space to work.
So, it is incorrect option.
Option (C): Wind turbines produce a large amount of energy is not a problem.
So, it is incorrect option.
Option (D): Wind turbines does not create a pollution or it does not pollute the air or water.
So, it is incorrect option.
Thus, we can say that Wind turbines are efficient only in certain areas it is a problem with using wind turbines to produce energy because the flow of air from areas of high pressure towards the lower pressure.
Learn more about the Wind turbines here: https://brainly.com/question/883099
#SPJ2
How many atoms of aluminum (Al) are in 6.4 mol of aluminum
Answer:
How many atoms are in 6.2 moles of aluminum? I mol = 6.02X1023 atoms so 6.2 mol = 6.2x (6.02x1025) = 3.73 x1024 atoms of Aluminum
There are approximately 3.86528 × 10²⁴ atoms of aluminum (Al) in 6.4 mol of aluminum.
To determine the number of atoms of aluminum (Al) in 6.4 mol, we use Avogadro's number, which states that 1 mole of any substance contains 6.022 × 10²³ particles (atoms, molecules, or ions).
Given that 6.4 mol of aluminum is provided, we can use Avogadro's number to calculate the number of atoms:
Number of atoms = (6.4 mol) × (6.022 × 10²³ atoms/mol)
Calculating the multiplication, we find:
Number of atoms = 3.86528 × 10²⁴ atoms
Therefore, there are approximately 3.86528 × 10²⁴ atoms of aluminum (Al) in 6.4 mol of aluminum.
This calculation is based on the fact that 1 mole of aluminum contains Avogadro's number of aluminum atoms. The molar quantity allows us to convert between the mass of a substance and the number of atoms or molecules present.
Avogadro's number is a fundamental constant in chemistry that relates the mass of a substance to the number of particles it contains. It is approximately 6.022 × 10²³ particles per mole. By using this conversion factor, we can determine the number of atoms present in a given amount of substance.
To learn more about atoms, here
https://brainly.com/question/29695801
#SPJ2
How many electrons does potassium, shown above, need to gain or lose to become stable?
Group of answer choices
gain 2
gain 1
lose 1
lose 2
Answer:
It would tend to lose two electrons and form a +2 ion. Potassium is in the first column and therefore has 1 electron in its outermost shell. It would tend to lose one electron and form a +1 ion.
What type of reaction is the one shown above?
Answer:
.D you have any idea
Explanation:
Sana makatulong
How many moles of potassium are needed to react completely with 7.50 mol of chromium (III) oxide? Show work.
Answer:
45 mol
Explanation:
First you need to balance the equation:
6K + Cr2O3 = 3K2O + 2Cr
the proportion of the coeficients of potassium and chromium oxide is 6 to 1 so we need to multiply 7.5 by 6 to get 45.
The net force of an object describes…
- The force that balances out the force of gravity
- All the forces in the same direction
Answer:
The vector sum of all forces that act upon an object
The following dot plot represents the litter sizes of a random sample of labrador retrievers.
Calculate the mean, median, and mode for this set of data.
Calculate the range, interquartile range, and mean absolute deviation (rounded to the nearest hundredth) for this set of data. For the mean absolute deviation, do not round the mean.
Make two inferences about the litter size of labrador retrievers.
Answer:
12
Explanation:so the mean deviation is for the square and the square is for you so you keep the square and add it.
Answer:
1. mean: 7.78 median: 8 mode: 7
2. range: 9 interquartile range: 2 MAD: 4.5367
3. The range is about 4 times bigger than the interquartile range. The mean is around double the MAD.
Explanation:
NaCl is purified by adding HCl to a saturated solution of NaCl (317 g/L). Will pure NaCl precipitate when 10mL of 13.0 M HCl is added to 0.2 L of saturated solution?
Answer:
Yes, pure NaCl will precipitate out of the solution
Explanation:
The parameters of the NaCl solution and HCl mixture are;
The saturation of the NaCl solution = Saturated solution
The mass concentration of the NaCl solution = 317 g/L
The volume of the HCl added = 10 mL
The concentration of the HCl added = 13.0 M HCl
The volume of the saturated NaCl solution = 0.2 L
The molar mass of NaCl = 58.44 g/mol
The number of moles of NaCl per liter = (317 g/L)/(58.44 g/mol) = 7925/1461 moles ≈ 5.42 moles
The ionization of the molecules in solution are;
HCl (aq) + H₂O (l) → H₃O⁺ (aq) + Cl⁻ (aq)
NaCl (s) ↔ Na⁺ (aq) + Cl⁻ (aq)
The number of moles of the Cl⁻ ion from the HCl is 13 moles per liter, the number of moles of Cl⁻ ion from the saturated solution of NaCl is approximately 5.42 moles, therefore, ionic product I.P. of the solution of Cl⁻ ions is larger than the solubility product of the solution, [tex]K_{sp}[/tex] of the NaCl and according to Le C h a t e l i e r's principle, NaCl will precipitate out of the solution
determine the kinetic energy of an 833.0 kg roller coaster car moving at a speed of 20.0 m/s
Answer:
166,600J
Explanation:
Kinetic energy (K.E), which is the energy due to motion of a body, can be calculated by using the formula;
K.E = 1/2 × m × v²
Where;
K.E = kinetic energy (joules)
m = mass of body (kg)
v = speed or velocity (m/s)
According to this question, the mass of the roller coaster is 833.0 kg while its velocity/speed is 20.0m/s.
K.E = 1/2 × 833 × 20²
K.E = 1/2 × 833 × 400
K.E = 1/2 × 333200
K.E = 166,600
Therefore, the kinetic energy of the roller coaster car is 166,600J.
Molar Concentration of H2O+ lons
in Four Solutions
Solution Molar Concentration
of H3O+ lon
(M)
A 0.1
B 0.01
с 0.001
D I’m 0.0001
Which solution has the highest pH?
Answer:
d
Explanation:
because it’s moving the most spots to the left
The acidity or alkalinity of a solution depends upon its hydronium ion concentration and hydroxide ion concentration. Here among the given solutions, the solution D has the highest pH. The correct option is D.
What is pH?The pH of a solution is defined as the negative logarithm to the base 10 of the value of the hydronium ion concentration in moles per litre. The pH scale is introduced by the scientist Sorensen. It is more easy to express the concentration of H₃O⁺ using this method.
The equation used to calculate the pH of the solution is given as:
pH = -log[H₃O⁺]
For 0.1 M
pH = -log[0.1] = 1
For 0.01 M
pH = -log[0.01] = 2
For 0.001 M
pH = -log[0.001] = 3
For 0.0001 M
pH = -log[0.0001] = 4
So solution D has the highest pH which is 4.
Thus the correct option is D.
To know more about pH, visit;
https://brainly.com/question/27945512
#SPJ2
NH4NO3->N2O+2H2O How many grams of NH4NO3 are required to produce 33.0 games of N2O
Answer:
the moles of N2O are 33/(14.2 + 16) = 0,75 (mol)
NH4NO3 -----------> N2O + 2H2O
0.75 <--- 0.75
=> The moles of NH4NO3 are 0,75 mol
=> m = 0,75(14.2 + 4 + 16.3) = 60 (g)
Explanation:
Answer:
60 grams of NH4NO3
Explanation:
2222222c is right, but here's a better visualization of the answer!What happens in a single-replacement reaction?
A. One reactant breaks apart to form new compounds.
B. Two reactants combine to form one product.
C. Two reactants exchange elements with each other.
D. One reactant replaces an element in another reactant.
Answer:
D
Explanation:
A single-replacement reaction occurs when one element replace another in a single compound.
9 Answer
Based on Table S, an atom of which element has the strongest attraction for electrons in a chemical bond
What is the answer?
1 aluminum
2 chlorine
3 magnesium
4 sulfur
Answer:
Chlorine
Explanation:
The tendency of an atom to attract electron is referred to as electronegativty. In the periodic table, electronegativity increases across the period from left to right and decreases down the group.
Following that trend, the element with the greatest electronegativty is;
Chlorine
The atom that has the strongest attraction for electrons in a chemical bond in the options is Chlorine.
The tendency of an atom to attract electrons to itself is know as electronegativity.
The most electronegative element is fluorine.
Electronegativity increases across the period in the periodic table.
Electronegativity decreases down the group in the periodic table.
Examples of electronegative elements are mostly non metals like oxygen, fluorine, chlorine, etc.
Therefore, the atom that has the strongest attraction for electrons in a chemical bond is Chlorine.
read more: https://brainly.com/question/14388919?referrer=searchResults
A(n) ____________________ has a rectangular shape and contains a cell wall, chloroplasts, and one large vacuole.
When you mix two substances, the heat gained by one substance is equal to the heat lost by the other substance. Suppose you place 125 g of aluminum in a calorimeter with 1,000 g of water. The water changes temperature by 2 °C and the aluminum changes temperature by –74.95 °C. Water has a known specific heat capacity of 4.184 J/g °C. Use the specific heat equation to find out how much heat energy the water gained (q). Assume that the heat energy gained by the water is equal to the heat energy lost by the aluminum. Use the specific heat equation to solve for the specific heat of aluminum. (Hint: Because heat energy is lost, the value of q is negative.)
From the calculation, the specific heat capacity of the aluminum is 9.5 * 10^-5 J/g °C
What is specific heat capacity?The specific heat capacity refers to the heat that is required to raise the temperature of a body by 1K. The heat gained by the water is equal to the heat energy lost by the aluminum hence the negative sign.
Thus;
-(125 * c * –74.95) = 1,000 g * 4.184 * 2
c = 1,000 g * 4.184 * 2/125 * 74.95
c = 8368/9368.75
c= 9.5 * 10^-5 J/g °C
Learn more about specific heat capacity:https://brainly.com/question/1747943
#SPJ1
A 5.0 balloon containing nitrogen gas is cooled from 25 degrees to 5°C. What is the final volume of the balloon?
Answer:
5.4
Explanation:
V1=5.0
T1=25+ 273=298
V2= z(unknown)
T2=5+273=278
V1/T1 =V2/T2
V2=V1T2/T1
=5*298/278
=5.4
Which of the following best describes the distribution of the world’s food supply? Select all that apply.
Still unevenly distributed leaving millions starving to death.
Quickly changing to be evenly distribute based on humanitarian efforts.
Slowly changing to be slightly more evenly distributed based on humanitarian efforts.
Evenly distributed throughout the population of the world now.
Answer: It would be A and C
Explanation: I did the test and got it right. Hope this helps!
Answer:
A + C
Explanation:
ur an amazing person have a great day :3
quote for today : ~dont trust anyone to much remeber the devil was once angle
Does the physical form of the material matter for mass-mole
and mole-mass calculations?
The physical form of the material matter for mass-mole and mole-mass calculations is solid.
What is the relation between mass & moles?Relation between mass and moles will be represented as:
n = W/M, where
W = given mass in grams
M = molar mass in grams/mole
So the physical state of the matter that is used in the above relation is solid because solid is only present in the grams and kilogrmas quantity.
Hence solid is the physical form of the matter.
To know more about mass & moles, visit the below link:
https://brainly.com/question/15373263
#SPJ2
