Na2 C6H6O7 (sodium hydrogen citrate)
Express the mass of sodium to three significant figures.
mNa =

Answer:

which is an example of analog device

Due to the reaction's slow process of producing ppt or a change in color.

Chemical reaction is defined as a procedure where one or more compounds, known as reactants, are changed into one or more new substances, known as products. Chemical reactions result in the formation of new chemical bonds between the atoms of the reactant molecules and the product particles' atoms. While there are the same number of atoms both before and after the chemical transition, there will be a change in the number of molecules.

When carbon dioxide and water combine, carbonic acid is created. The indicator changes color as a result of the water becoming slightly acidic due to carbon dioxide gas from exhaled breath. Dissolution causes a change in pressure. This suggests a physical alteration.

Thus, due to the reaction's slow process of producing ppt or a change in color.

To learn more about chemical reaction, refer to the link below:

https://brainly.com/question/29039149

#SPJ2

The materials that would float in a molten vat of lead are glass and charcoal.

Glass and charcoal are the materials that would float in a molten vat of lead because they are less denser than the lead solution while on the other hand, platinum and gold get drowned into the solution because of its high density as compared to lead.

So we can conclude that the materials that would float in a molten vat of lead are glass and charcoal.

Learn more about density here: https://brainly.com/question/14997726

#SPJ1

Answer:

1.05 mols of O2 gas

Explanation:

For this type of problem, it's important to understand what the balanced Chemical equation tells us:

Let's look at the balanced chemical equation:

[tex]2Mg(s)+O_2(g)-- > 2MgO(s)[/tex]

This equation two sides of the reaction arrow.  On the left are the reactants (things you start with, and that react during the chemical reaction), and on the right side are products (things that are produced during the chemical reaction that you end with).

The numbers in front of each compound tell how many of molecules are involved for a full reaction without anything left over.  A "mol" is a large quantity ([tex]6.022*10^{23}[/tex]), in this case, of molecules , since it's unlikely you're only taking a single molecule of each substance (it would be so tiny, you wouldn't even know you were doing the reaction).

So,for every 2 moles of Magnesium used, we'll also need 1 mole of Oxygen, and it will produce 2 moles of Magnesium Oxide.

In a way, during the reaction it's almost like 2 moles of Magnesium is equal to 1 mole of Oxygen and is equal to 2 moles of Magnesium Oxide:

[tex]2 mol Mg(s)=1mol O_2(g)=2molMgO(s)[/tex]

From here, we can build some unit ratios, to convert between the known quantity of moles we have, and find the unknown quantity of moles that are requested.

We know that we are looking at 2.10 mol of Magnesium, so we want a unit ratio with moles of Mg on the bottom.  We want to find moles of O2, so we want a unit ratio of moles of O2 on top.

The unit ratio we want is the middle part of the equation, divided by the left part of the equation.

[tex]2 mol Mg(s)=1mol O_2(g)\\\frac{2 mol Mg(s)}{2 mol Mg(s)}=\frac{1mol O_2(g)}{2 mol Mg(s)}\\1=\frac{1mol O_2(g)}{2 mol Mg(s)}[/tex]

Since this quantity is 1, it is a unit ratio and can be multiplied to other things to change their units (for this problem).

Starting with what we know, and multiplying by our unit ratio:

[tex]2.10 mol Mg(s)*\frac{1mol O_2(g)}{2 mol Mg(s)}=1.05mol O_2(g)[/tex]

Notice that the units from the first quantity cancel with the units on the bottom of the fraction, leaving only the unit on top of the fraction ... the exact units we wanted!

So, 1.05mols of O2 would be consumed during the reaction if exactly 2.10moles of Magnesium are burned.

Answer: The concentration of lead nitrate Pb(NO3)2 in a 0.726 M solution is 0.755 molal.

Explanation:

Given:

The molar mass of Pb(NO3)2 is 331.2 g/mol

Assuming 1 litre of solution.  This would equal 1202 g of solution

In the one litre of solution, you have 0.726 mol Pb(NO3)2

0.726 mol (331.2 g/mol) = 240.5 g Pb(NO3)2

Mass of water in 1 L of solution = 1202 g - 240.5 g = 961.5 g = 0.9615 kg

Molality = mols of solute / kg of solvent

= 0.726 mol / 0.9615 kg

= 0.755 m Pb(NO3)2

Answer:

element.....

it is in the periodic table

Answer:

cysteine is HOOC-CH--CH₂-SH

reaction with Naoh

HOOC-CH--CH₂-SH + Naoh ---->oh-oNH2-oh + H2o

Explanation:

it applies to pressure laws

Answer:

Sickle cell anemia

Explanation:

is an inherited genetic abnormality of hemoglobin (the oxygen-carrying protein found in red blood cells) characterized by sickle (crescent)-shaped red blood cells and chronic anemia caused by excessive destruction of the abnormal red blood cells.

Answer:

Sickle cell

Explanation:

I just took the test and it was correct.

The balanced equation for this reaction is [tex]3\text{CO}+\text{Fe}_{2}\text{O}_{3} \longrightarrow 2\text{Fe}+3\text{CO}_{2}[/tex].

This means that for every mole of iron(III) oxide consumed, 3 moles of carbon monoxide are consumed.

This means that iron(III) oxide has a formula mass of 2(55.845)+3(15.999)=g/mol, and thus 318 g is equal to [tex]\frac{318}{159.687}=1.9913956677751 \text{ mol}[/tex].

So, this means we need [tex]3(1.9913956677751)=5.9741870033253 \text{ mol}[/tex] of CO.

This means CO has a formula mass of 12.011+15.999=28.01 g/mol, and thus 5.9741870033253 moles have a mass of (28.01)(5.9741870033253), which is equal to about 167 g (to 3 sf)

Answer:

55.5g of calcium chloride is produced in the reaction.

Explanation:

To calculate the amount of calcium chloride.

The reaction of calcium carbonate with hydrochloride acid gives calcium chloride

CaCO₃ +  2HCl  →  CaCl₂  + CO₂  +  H₂O

Mass of calcium carbonate (CaCO₃)= 50.0g

Molecular mass of CaCO₃ = Ca + C + O₃

                                             = 40+ 12 + 3(16) = 100g

No of moles of calcium carbonate CaCO₃ = given mass / molecular mass

                                                                          = 50g/ 100

                                                                            = 0.5 moles

Molecular mass of calcium chloride = 40+ 2(35.5)=(40+71.0)= 111g/mol

1 mole of calcium carbonate gives = 1 mole of calcium chloride

0.5 moles of calcium carbonate gives= 0.5 × 111g/mole

                                                                = 55.5g

To learn more about moles, grams and molecular mass, refer to-

https://brainly.com/question/11893320

#SPJ10

Answer: 50.806 cm is the correct answer.

Explanation: First divide 6104.5 cm^2 by 22.3 cm.

[tex]\frac{6104.5cm^2}{22.3cm} = 273.74 cm[/tex]

*Note: When dividing units, subtract the exponents, and when multiplying units simply add the exponents.

Then continue by subtracting 324.55 cm - 273.74 cm.

This should give you an answer of 50.806 cm.

Taking into account the reaction stoichiometry, the mass of silver(I) chloride formed is 930.37 grams.

In first place, the balanced reaction is:

2 AgNO₃ + BaCl₂ → 2 AgCl + Ba(NO₃)₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

AgNO₃: 2 moles ×169.87 g/mole= 339.74 grams

BaCl₂: 1 mole ×208.24 g/mole= 208.24 grams

AgCl: 2 moles ×143.32 g/mole= 286.64 grams

Ba(NO₃)₂: 1 mole×261.34 g/mole= 261.34 grams

The following rule of three can be applied:  if by reaction stoichiometry 208.24 grams of barium chloride form 286.64 grams of silver(I) chloride, 675.9 grams of barium chloride form how much mass of silver(I) chloride?

[tex]mass of silver(I) chloride=\frac{675.9 grams of barium chloride x286.64 grams of silver(I) chloride }{208.24 grams of barium chloride}[/tex]

mass of silver(I) chloride= 930.37 grams

Finally, the mass of silver(I) chloride formed is 930.37 grams.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Compared to infrared radiation, an electromagnetic wave that has a lower frequency will also have a longer wavelength and equal speed

Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field.

It can be also defined as waves are composed of oscillating magnetic and electric fields.

One important feature fo electromagnetic radiation is that all have the same speed in vacuum, c, in vacuum, which is the speed of light.

Since, the speed, wavelength and frequency of the waves are related you can infere any of them when the other two are known.

The equation is:

speed = frequency × wavelength

   s     =          ν        ×      λ

   c     =          ν        ×      λ      . . . for the specific case of electromagnetic radiation

That inverse relation between frequency and wavelength, where the speed is the constant, shows that the lower the frequency the longer the wavelength.

Therefore,  the correct statment is that an an electromagnetic wave that has a lower frequency will also have a longer wavelength and equal speed (option B).

Learn more about Electromagnetic wave here ;

https://brainly.com/question/3101711

#SPJ1

Your question's data is not correct, it should be 100 grams of limestone instead of 10 grams, You will find the correct solution below according to that.

The percentage purity of calcium carbonate is 82.5%

The balanced chemical equation is

CaCO₃ + 2HCl  →  CaCl₂ + H₂O + CO₂

Because CO₂ is a gas, you can easily convert it to mole directly

No. of mol of CO₂ = volume dm³ /22.4 dm³

No. of mol of CO₂ = 8.5 dm³ / 22.4 dm³

No. of mol of CO₂ = 0.825 mol

According to equation 1 mole of CO2 is made from 1 mole of CaCO3

So, 0.825 mole of CO2 will be made from 0.825 mole of CaCO3

Mass of CaCO3 = moles of CaCO3 × Molar mass of CaCO3

Mass of CaCO3 = 0.825 × 100 grams

Mass of CaCO3 = 82.5 grams

Percentage purity of CaCO3 = (mass of CaCO3/Total mass of CaCO3) × 100

Percentage purity of CaCO3 = (82.5/100) × 100 %

Percentage purity of CaCO3 = 82.5 %

Thus we can say that as percentage purity is the percentage of mass of pure compound on per unit of total compound, the percentage purity of the calcium carbonate will be 82.5 %

Learn more about Percentage Purity here:

https://brainly.com/question/25446369

#SPJ10

Answer:

5.96 * 10^23 molecules

Explanation:

Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer.  The question is asking for the number of molecules. That means you do not break down each molecule to  find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.

1 mol contains 6.01 * 10^23 molecules

0.99 mol contains x

1/0.99 = 6.02 * 10^23 / x molecules

x = 0.99 * 6.02 * 10^23

x = 5.96 * 10^23

Answer:

I think D is the answer. The others can't be answer. Specially B and D can't be the answer.

Carbon dioxide + Water Glucose (sugar) + Oxygen CO2 + H2O C6H12O6 + 6O2 Cellular respiration or aerobic respiration is a series of chemical reactions which begin with the reactants of sugar in the presence of oxygen to produce carbon dioxide and water as waste products.

The conversion of heat to kinetic energy inside the water molecules causes the motion of the molecules to increase. The distance between molecules widens when the molecules move more quickly and clash more frequently. (As more heat is absorbed, the distance between molecules for solids, liquids, and gases widens)

The types of bonds and atoms in the molecule shown below are C. Single bonds, double bonds, carbon atoms, and hydrogen atoms.

Carbon can only form a bond with a maximum of 4 other molecules.

We have been given a molecule

H₂C               CH₂-CH3

       C=C

H                H

In the given figure we can see that the molecule includes one double bond and other are single bonds.

Thus, The types of bonds and atoms in the molecule shown below are C. Single bonds, double bonds, carbon atoms, and hydrogen atoms.

Learn more about bonds;

https://brainly.com/question/17930825

#SPJ1

Answer:

c) oil and vinegar

Explanation:

A heterogeneous mixture is a mixture that does not have a "uniform composition" (meaning that the entire mixture is not thoroughly mixed to be the exact same. In different parts of the mixture, there is a              non-consistent / differing composition.)

Oil and vinegar, as you may know, do not thoroughly mix when put together--different parts of the mixture are made of different compositions. Some parts are made of oil, and some are a concentration of vinegar, but because they are not able to be mixed entirely, the mixture is considered a heterogeneous mixture. If you were to take different samples of different parts of the liquid, you would have a clear separation of oil and vinegar.

Milk is thoroughly milk--if you take out a tablespoon, it will be milk entirely--and it will have the same composition as all of the other milk in the bottle.

Air is complicated--and it can be described as either, but the question was likely intending the answer of oil and vinegar.

Vinegar and water do thoroughly mix. Vinegar absorbs water on a molecular level, so the mixture is thoroughly mixed when put together.

(Hope this helps!)

Lead will have the highest temperature .

What is Specific Heat ?

Specific Heat is defined as the amount of heat required to raise the temperature of a 1 gm of substance by 1 degree Celsius.

If heat is added to 25.0g of copper, calcium, aluminum, iron, lead

The missing given specific heat is

Copper, 0.377

Calcium, 0.656

Aluminum, 0.895

Iron, 0.448

Lead, 0.129

Higher specific heat means more temperature required to bring the same amount of change in temperature

Here the temperature change is fixed , The metal with the lowest Specific heat will have the highest temperature.

From the data it can be seen that

Specific Heat of Lead, 0.129

Therefore Lead will have the highest temperature.

To know more about Specific Heat

https://brainly.com/question/11297584

#SPJ1

Answer:

6.022 x 10²³

Explanation:

The number of atoms =  the number of moles x with the Avogadro's number.

(The Avogadro's number is 6.022 x 10²³ atoms / moles)

number of atoms = 1.00 moles x 6.022 x 10²³ atoms / mole

number of atoms =  6.022 x 10²³ atoms

(There is no need to simplify?) = 6.022 x 10²³

(ps. This is my first time doing this question so im sorry if i got it wrong

(つ﹏⊂)

C. Double replacement

cations and anions switch places

Answer: A. Wearing loose comfortable clothing so you can concentrate on the lab.

Explanation:

Wearing loose clothing can make it cling onto certain things, which could create a spill or a different hazard. B, C, and D are all things you SHOULD be doing to achieve safe lab behavior.

I hope this helps! Pls give brainliest!! :)

The error caused will lower the number of moles when he did not do the second heating.This question is related to the empirical formula.

A formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

The empirical formula is the simplest ratio of atoms in a given compound.

we know that heating is used to eliminate most of the water molecules which are attached to the compound in the question, it's given that the second heating was not performed by the students.

This means that there are still some water molecules attached to the compound. This will imply that higher mass will be calculated for the compound because the water molecules are also considered.

So now, if we look at the calculation for the number of moles of water in this, we can say that this will be lower than the actual amount.

This is because there are some unaccounted moles of water which are still attached to the compound and these will be accounted in the compound mass rather than the waters. Therefore, the number of moles will be lower.

Hence, The error caused will lower the number of moles when he did not do the second heating.

Learn more about Empirical formula here ;

https://brainly.in/question/32699671

#SPJ1

Electrons in the Bohr model follow the number of elements in the rows of the periodic table.

2 in the first orbit

8 in the second and third ring

18 in the fourth etc...

The Bohr model is a simplistic means of explaining the placement of the subatomic particles of the elements of the periodic table.

The Bohr model arrangement of electrons follows the same pattern as the periodic table.

2 elements in the first row, and 2 electrons in the first orbit.

8 elements in the second row, and 8 electrons in the second orbit.

8 elements in the third row, and 8 electrons in the third orbit.

The fourth and fifth orbits would therefore hold 18 electrons.

For most chemists, the Bohr model does not work well beyond the third row of the periodic table because the model becomes quite oversized and bulky.

Answer:

Make life easy for your customers and they are more likely to come back and buy again.

Explanation:

For example, you have to hire the right talent. You don't want somebody on the job that doesn't know how to do anything.

Option (b) is correct.

​​​

          A separation technique called filtration is used to isolate pure chemicals from mixtures of particles, some of which are big enough to be caught by a porous medium.

         The separation of combinations of two or more pure liquids is accomplished through distillation. The components of a liquid mixture are vaporized, then condensed and isolated during the purifying process of distillation.

          Chromatography is the process of separating a mixture by passing it through a medium where the components move at various speeds, either in solution, suspension, or as a vapor (as in gas chromatography).

         The magnetic separation process involves attracting magnetic materials using a magnet to separate the components of mixes. Non-magnetic compounds are separated from magnetic ones using the magnetic separation technique.

From the above separation techniques, we can say that option(b) Distillation a separation process that uses boiling points to separate the component of a mixture is correct.

To know more about the separation technique refer to:-

https://brainly.com/question/24645716

#SPJ10

Answer:

64

Explanation:

ieijkjkjjsjsjsjsjsjskskakskskskskkkdksksjdjdjdjdjdjdjdjdndndndmdndndmdmdndndndjdjdjdjdjdkdkekrk