Answer:
Remote sensing is the process of detecting and monitoring the physical characteristics of an area by measuring its reflected and emitted radiation at a distance (typically from satellite or aircraft). ... Cameras on satellites can be used to make images of temperature changes in the oceans.
2.The answer is Land Area. If you know the distance and scale at which the image was captured, than one pixel of the image is equal to an X amount of area. The land area is represented as one pixel in an image called Resolution.
3.A pixel is the smallest picture element addressable on a picture, it is a specific location, and at that location associated with that location, is color, intensity
a.mph (miles per hour), mph. knots, knots. m/s (meters per second), m/s. ft/s (feet per second), ft/s. km/h (kilometers per hour), km/h ...
Explanation:
7 kph 4.35 mph
8 kph 4.97 mph
9 kph 5.59 mph
10 kph
The apparatus or tools that could be considered as sensors are telecopes, probes and landsat satellites.
What is remote sensing?Remote sensing can be defined as a process that is used for the acquisition of information about a phenomenon or physical object on a planet without coming in close contact with it, especially through the use of a telecope, probe or landsat satellite.
When satellite images are analyzed by astronomers or scientists, a unit called the pixel is a key to calculating land area. Also, one pixel is a unit that represents a land area of 30 by 30 meters.
Read more on telescope here: https://brainly.com/question/18300677
Which is not a critical part of collision theory?
orientation
energy
amplification
collisions
Answer:
Amplification
Explanation:
calcium + nitrous acid → calcium nitrite
+
nitrogen monoxide
+ water
Answer:
It is double displacement reaction
Why do people who exercise more produce more carbon dioxide ?
Answer:
When you exercise and your muscles work harder, your body uses more oxygen and produces more carbon dioxide.
Explanation:
Because your muscles are working harder when you exercise, your body requires more oxygen and produces more carbon dioxide.
What is exercise?Exercise is characterized as a physiological movement that maintains or enhances total physical wellness. People who exercise are less likely to get diseases and to maintain a healthy weight. Type 2 diabetes, heart disease, high blood pressure, and weight gain can all be warded off with regular exercise. Leaping, jogging, or lifting weights are examples of exercises that can support bone health.
The lungs both provide the body with oxygen, which gives you energy, and remove carbon dioxide from the system, which is a byproduct of energy production. The heart pumps oxygen-rich blood to the working muscles. Because your muscles are working harder when you exercise, your body requires more oxygen and produces more carbon dioxide.
Thus, because your muscles are working harder when you exercise, your body requires more oxygen and produces more carbon dioxide.
To learn more about exercise, refer to the link below:
https://brainly.com/question/13128077
#SPJ2
PLEASE HELP ME OUT. I AM REALLY LOST AND I JUST NEED THIS LAST QUESTION I WILL BE GRATEFUL AND WILL GIVE BRANLIEST!
PLEASE HELP ME OUT. I AM REALLY LOST AND I JUST NEED THIS LAST QUESTION I WILL BE GRATEFUL AND WILL GIVE BRANLIEST!
Explanation:
—COOH and —NH₂
Carboxylic Acid and Amino group
-TheUnknownScientist
draw Fischer projection for L-ketononose
Answer: acttachec pic
The last carbon have the H on there, forgot to put it in :)
The Fischer projection of L-ketononose is:
H
|
CH₂OH-C=O-H
|
C
|
CH₂OH
Fischer projection is a two-dimensional representation of a three-dimensional molecule. In Fischer projection, the carbon atoms are drawn as vertical lines, and the hydrogen atoms and hydroxyl groups are drawn on the right-hand side or left-hand side of the carbon atoms. The carbonyl group is always drawn at the top of the Fischer projection.
The L-configuration is a type of configuration that is assigned to organic molecules based on the orientation of the hydroxyl group on the penultimate carbon atom. If the hydroxyl group is on the left-hand side of the Fischer projection, the molecule is assigned the L-configuration. If the hydroxyl group is on the right-hand side of the Fischer projection, the molecule is assigned the D-configuration.
In the Fischer projection of L-ketononose, the hydroxyl group on the penultimate carbon atom is on the left-hand side, so the molecule is assigned the L-configuration.
To learn more about Fischer projections, here
https://brainly.com/question/34200612
#SPJ6
The distance between an oxygen and hydrogen in a water in 95.98.What is the distance in meter nanometer and centimeters
Answer:
9.598 × 10⁻¹¹ m
0.09598 nm
9.598 × 10⁻⁹ cm
Explanation:
Step 1: Given data
Distance between oxygen and hydrogen in water (d): 95.98 pm
Step 2: Convert "d" to meters
We will use the conversion factor 1 m = 10¹² pm.
95.98 pm × 1 m/10¹² pm = 9.598 × 10⁻¹¹ m
Step 3: Convert "d" to nanometers
We will use the conversion factor 1 m = 10⁹ nm.
9.598 × 10⁻¹¹ m × 10⁹ nm/1 m = 0.09598 nm
Step 4: Convert "d" to centimeters
We will use the conversion factor 1 m = 100 cm.
9.598 × 10⁻¹¹ m × 100 cm/1 m = 9.598 × 10⁻⁹ cm
In a _____ molecules move just enough to stay close together but not to stick
Answer:
I think it might be liquid
Answer: in a molecular molecules move just enough to stay close together but not to stick
Explanation:
If the hydroxide concentration of a solution is
[OH-] = 4.67 X 10-8
what would the pH of that solution be?
Answer:
ty
Explanation:
ytCan someone please explain what to do it’s late at night and I need sleep but I forgot I had this homework please help me with a few questions I’m desperate :(
Answer:
1) it takes 13 second
2) 2100 miles
3) 40 miles / hours
4) 730 meters
Select all the correct answers.
The dumping of garbage caused the population of crabs in an area to drop from 2,000 to 500. Crabs eat algae and are preyed on by larger fish.
How will the crab's population change affect these two specles?
O
Food and space will be equally distributed among the three species.
. The population of predatory fishes will change.
O The biodiversity of the ecosystem will decrease.
. The algal population will Increase.
O The algal population will decrease.
Answer:
The population of predatory fishes will change.
The biodiversity of the ecosystem will decrease.
Explanation:
Answer:
The population of predatory fishes will change.
The biodiversity of the ecosystem will decrease.
Explanation:
Im on the edmentum mastery test.
How many moles of helium are inside a 7.3 L party balloon at STP?
Answer:
0.326 mol. is the answer.
Explanation:
No. of moles = Volume (L) / Volume at STP
N = 7.3 / 22.4
N = 0.326 moles
B. Calculate the Pressure of 20.0 mole of helium in a 10.0 L cylinder at 273 K. [a = 0.0341 atm*L^2/mol^2 ; b = 0.0237L/mol ; R = 0.08205 L*atm/mol*K) *
87.3 atm
46.9 atm
55.5 atm
12 kPa
Answer:
46.9 atm
Explanation:
Applying Van der waals equation
P = [nRT/(V-nb)]- (an²/V²)............... Equation 1
Where P = pressure, T = temperature, n = number of moles, V = volume, R = Universal constant, a and b = gas constant
Given: n = 20 moles, R = 0.08205 L.atm/mol.K, T = 273 K, V = 10.0 L, a = 0.0341 atm.L²/mol², b = 0.0237L/mol
Substitute these values into equation 1
P = [(20×0.08205×273)/(10-20×0.0237)]-(0.0341×20²/10²)
P = (447.993/9.526)-0.1364
P = 47.028-0.1364
P = 46.9 atm
A sample of neon gas at 52°C and a volume of 2.5 liters is cooled to 25°C. Calculate the new volume of the neon.
The new volume of the neon gas as its temperature is reduced is 2.29L.
Charles's lawCharles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.
It is expressed as;
V₁/T₁ = V₂/T₂
Given the data in the question;
Initial temperature of gas T₁ = 52°C = 325.15KInitial volume of gas V₁ = 2.5LFinal temperature T₂ = 25°C = 298.15KFinal volume V₂ = ?To determine the new volume of the neon gas, we substitute our given values into the expression above.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂ / T₁
V₂ = ( 2.5L × 298.15K ) / 325.15K
V₂ = 745.375LK / 325.15K
V₂ = 2.29L
Therefore, the new volume of the neon gas as itstemperature is reduced is 2.29L.
Learn more about Charles's law here: brainly.com/question/12835309
Which of the following groups of chemical elements would you expect to
be most alike in their physical and chemical properties?
A. Chromium, rhodium, zinc, silicon
B. Magnesium, strontium, radium, barium
C. Lithium, beryllium, boron, oxygen
D. Sulfur, selenium, chlorine, krypton
Answer: B. Magnesium, strontium, radium, barium
Explanation:
Elements are distributed in groups and periods in a periodic table.
Elements that belong to same groups will show similar chemical properties because they have same number of valence electrons.
Magnesium (Mg) , Strontium (Sr) , Radium (Ra) and Barium (Ba) are elements which belong to Group 2. They have 12, 38, 88 and 56 electrons respectively and contain 2 valence electrons each and need one electron to complete their octet.
The chemical reactivity of elements is governed by the valence electrons present in the element and thus they are alike in physical and chemical properties.
A sample of Xe gas is observed to effuse through a pourous barrier in 4.83 minutes. Under the same conditions, the same number of moles of an unknown gas requires 2.29 minutes to effuse through the same barrier. The molar mass of the unknown gas is _____ g/mol.
Answer:
28.93 g/mol
Explanation:
This is an extension of Graham's Law of Effusion where [tex]\frac{R1}{R2} = \sqrt{\frac{M2}{M1} } = \frac{t2}{t1}[/tex]
We're only talking about molar mass and time (t) here so we'll just concentrate on [tex]\sqrt{\frac{M2}{M1} } = \frac{t2}{t1}[/tex]. Notice how the molar mass and time are on the same position, recall effusion is when gas escapes from a container through a small hole. The time it takes it to leave depends on the molar mass. If the gas is heavy, like Xe, it would take a longer time (4.83 minutes). If it was light it would leave in less time, that gives us somewhat an idea what our element could be, we know that it's atleast an element before Xenon.
Let's plug everything in and solve for M2. I chose M2 to be the unknown here because it's easier to have it basically as a whole number already.
[tex]\sqrt{\frac{M2}{131} } = \frac{2.29}{4.83}[/tex]
The square root is easier to deal with if you take it out in the first step, so let's remove it by squaring each side by 2, the opposite of square root essentially.
[tex](\sqrt{\frac{M2}{131} } )^2= (\frac{2.29}{4.83})^2[/tex]
[tex]{\frac{M2}{131} } = (0.47)^2[/tex]
[tex]{\frac{M2}{131} } = 0.22[/tex]
M2= 0.22 x 131
M2= 28.93 g/mol
what element has the same amount of valence electrons as neon?
-KDM
Answer:
Sulfur has the same amount, like all the other elements in group 16, has six valence electrons.
Explanation:
Answer:
give me the question and I can help you
What is the change in electrons for sulfur in the following
reaction?
SO2 (aq) + Cr2O7^2-(aq) -> SO4^2- (aq) + Cr^3+ (aq)
A. Gain 3 electrons
B. Gain 5 electrons
C. Lose 2 electrons
D. Lose 1 electron
Answer:
Sulfate loses 2 electrons to sulphur dioxide.
which metal is the most easily oxidized?
A. highly active metal
B. moderately active metal
C.slightly active metal
D.an inactive metal
Answer:
B. Moderately active metal
Explanation:
4.What type of energy is used to fuel the process of photosynthesis and what type is produced in
respiration?
A Light energy is used in photosynthesis and created by respiration.
B ATP is used in photosynthesis, which allows the plant to undergo respiration.
C Light energy is used in photosynthesis, whereas respiration creates the energetic product, ATP.
D Food energy is used in photosynthesis and ATP is produced in respiration.
Answer:
A. light energy is used in photosynthesis and created by respiration
Matches=from Chemical energy to light energy+heat energy
Explanation:
A matchstick has a lot of chemical energy stored in it. When the match is struck, it burns and the chemical energy in it produces heat energy and light energy.
brainliest and follow and thanks
I have a question for us gals, is it hard for all of you when you try to get your crushes attention and he/she just keeps ignoring you to the point where you could just give up?
Answer:
Yes it is hard. For some of us. I already gave up, but now hes coming back. Id say sometimes its useless to get his attention if he never even pays attention to you anyways. It sucks because its so hard to get then to notice you for once.
Explanation:
1)
Two locations, one in northern Canada and one in the southwestern United States, receive
the same amount of precipitation each year. The location in Canada is classified as a humid
climate. Why would the location in the United States be classified as an arid climate?
A)
The soil-moisture storage in the southwestern United States is more than that in northern
Canada.
B)
The vegetation of the southwestern United States is different from that of northern
Canada,
C)
The potential evapotranspiration is greater in the southwestern United States than in
northern Canada
D)
The yearly distribution of precipitation is different.
please help :(.
Which is true about scientific theories?
Answer:
b
Explanation:
i think its b because theories are usually developed after many experiments/tests by different scientists. at least i think so lol i dont remember too much from biology
what are the mixtures of chemistry
How many molecules are in 8.78 moles of oxygen gas
Answer:
11 g
Explanation:
What type of plate boundary is
shown in the diagram below?
5. A gas has a pressure of 310 kPa at 237 degrees C.
What will its pressure be at 23 degrees C?)
Answer:
The pressure of the gas at 23 C is 179.92 kPa.
Explanation:
Gay-Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.
In short, when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases.
Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T} =k[/tex]
Studying two states, one initial 1 and the other final 2, it is satisfied:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 310 kPaT1= 237 C= 510 K (being 0 C= 273 K)P2= ?T2= 23 C= 296 KReplacing:
[tex]\frac{310 kPa}{510 K} =\frac{P2}{296 K}[/tex]
Solving:
[tex]P2=296 K*\frac{310 kPa}{510 K}[/tex]
P2= 179.92 kPa
The pressure of the gas at 23 C is 179.92 kPa.
If a chemist dilutes 2L of 0.700M solution to 3 L what will be the new concentration (M)
Answer:
Molarity of our solution= 0.46=0.5
Explanation:
When diluting a solution we can use the formula: 1 1 = 2 2
= M= Molarity of the solution
=V=volumes
On the left side, we'll put what we know/already have and on the right side of the formula we'll put down what we want to dilute it to.
Let's plug in what we already know.
(0.700M)(2L) = (M2)(3L)
Solve for M2 by dividing both sides by 3 so M2 will be by itself.
(0.700M)(2L)/(3L) = M2
M2= 0.46, we can round it up to 0.5
Write a balanced equation for the following:
1. P4 + O2 → P2O5
2. C3H8 + O2 → CO2 + H2O
3. Ca2Si + Cl2 → CaCl2 + SiCl4
(ANS1)— P4 + 5O2 ---> 2P2O5
(ANS2)— C3H8 + 5O2---> 3CO2 + 4H20
(ANS3)— Ca2Si + 4Cl2 ---> 2CaCl2 + SiCl4
Answer:
(ANS1)— P4 + 5O2 ---> 2P2O5
(ANS2)— C3H8 + 5O2---> 3CO2 + 4H20
(ANS3)— Ca2Si + 4Cl2 ---> 2CaCl2 + SiCl4
Explanation:
What volume of a 40.0 % by volume acetone solution can be
made with 20.0 mL of acetone?
Answer:
50 milliliters of acetone solution
Explanation:
If a solution is 40% by volume of acetone, then we have 40 mL of acetone in a 100 mL solution. So if we have 20 mL of acetone, we get: 100 mL solution 40 mL ( CH3) 2CO⋅
20mL (CH3) 2CO =50mL solution
The volume percent of 40% indicates that 40 ml of acetone is present in 100 ml solution. Then, 20 ml acetone can be made into 50 ml solution.
What is volume percentage ?Volume percentage is a common term used to express the concentration of a solution. Volume percentage of a solution is the ratio of the volume of the solute to the volume of the solvent multiplied by 100.
The volume percentage of the solution measures how much volume of the solute is present in 100 ml of the solution. Thus a 50% by volume solution is 50 ml solute in 100 ml solution.
Given that volume percentage of acetone = 40%.
that is 40 ml of acetone is present in 100 ml of the solution.
Therefore, the volume of the solution containing 20 ml of acetone is :
(20 × 100)/40 = 50 ml.
Therefore, 50 ml of 40% by volume o solution can be made by 20 ml of acetone.
Find more on volume percentage:
https://brainly.com/question/28998211
#SPJ7
