most reactions give off energy in the form of heat and are called what​

Answers

Answer 1
That would be exothermic. Exothermic reactions are processes that release energy, usually in the form of heat or light. Energy is released because the total energy of the products is less than the total energy of the reactants.
Answer 2

Answer:

Exothermic reaction.

Explanation:


Related Questions

One of the reagents below gives predominantly 1,2 addition (direct addition) while the other gives predominantly 1,4 addition (conjugate addition). a) Which major organic product is the result of 1,2 addition? ---Select--- b) Draw the skeletal structure of major organic product A

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

a

The correct option is reagent B

b

The  skeletal structure of major organic product A is shown on the third uploaded image

Explanation:

The mechanism of the reaction for A and  B  are shown on the second the second reaction and looking at this we can see that the reagent that  predominately gives 1,2 addition is reagent B  

Question 5 of 20:
Select the best answer for the question.
5. Which of the following is a homonuclear diatomic molecule?
O A. NH3
O B. 2002
O C. Hz
O D. CO

Answers

Answer:

Homo nuclear molecule mean having atoms of only one element,

I cant see clearly the option B and C can you correct them , 2002? Hz?

Explanation:

Answer:

H2

Explanation:

Consider the following specific heats of metals. Metal Specific Heat Aluminum 0.897 J/(g°C) Magnesium 1.02 J/(g°C) Lithium 3.58 J/(g°C) Silver 0.237 J/(g°C) Gold 0.129 J/(g°C) If the same amount of heat is added to 25.0 g of each of the metals, which are all at the same initial temperature, which metal will have the lowest temperature?

Answers

Answer:

Lithium

Explanation:

The specific geat capacity of a substance is the energy required to raise 1 unit of that substance by one degree.

Heat energy (Q) = mc∇t

Q = heat energy

M = mass of the substance

c = specific heat capacity

∇t = change in temperature of the substance

Generally, increase in the specific heat capacity will lead to a lower final temperature likewise decrease in the specific heat capacity will lead to increase the final temperature of the substance.

From the data above, we can take just two specific heat capacity and test this theory.

Assuming we have a

Mass = 25g

Heat energy applied (Q) = 1 J

Initial temperature (T1) = 10°C

Final temperature (T2) = ?

Q = mc∇t

Q = mc (T2 - T1)

For Lithium, specific heat capacity = 3.58J/g°C

1 = 25 × 3.58 (T2 - 10)

Solve for T2

1 = 89.5 (T2 - 10)

1 = 89.5T2 - 895

89.5T2 = 896

T2 = 896 / 89.5

T2 = 10.011°C

For Magnesium (Mg) specific heat capacity = 1.02J/g°C

Q = mc∇t

1 = 25 × 1.02 × (T2 - 10)

1 = 25.5 (T2 - 10)

1 = 25.5T2 - 255

Solve for T2

25.5T2 = 256

T2 = 10.039°C

Notice the trend that decrease in the specific heat capacity leads to increase in the final temperature.

Try and continue for the elements and see how it works.

Classify the following unbalanced chemical reaction Fe(s) + Cl2(aq) = Fe2+(aq) + Cl-(aq)
1. Acid-Base Reaction
2. Precipitation Reaction
3. Oxidation-Reduction Reaction
4. Combustion Reaction

Answers

Answer:

3. Oxidation-Reduction Reaction

Explanation:

Fe(s) + Cl2(aq) = Fe2+(aq) + Cl-(aq)

Fe(s) -2e- ----> Fe2+(aq)  oxidation

Cl2(aq)  + 2e- -----> 2Cl-(aq)  reduction

The given unbalanced chemical reaction is the oxidation-reduction reaction. Therefore, option (3) is correct.

What is an oxidation-reduction reaction?

Redox reactions can be defined as oxidation-reduction chemical reactions in which the reactants of the reaction undergo a change in their oxidation states. All the redox reactions are further broken down into two different processes: a reduction process and an oxidation process.

The oxidation and reduction reactions take place simultaneously in an Oxidation-Reduction reaction. The substance that is getting reduced in a reaction is known as the oxidizing agent, while a substance that is getting oxidized is the reducing agent.

The given chemical reaction is:

[tex]Fe(s) + Cl_2(aq) \longrightarrow Fe^{2+}(aq) + Cl^-(aq)[/tex]

The oxidation reaction for this reaction is: Fe (s)  →  Fe²⁺ (aq)  + 2e⁻

The reduction reaction:  Cl₂ (g)  +  2e⁻   →  2Cl⁻ (aq)

Therefore, the given reaction between the iron and chlorine gas is the oxidation-reduction reaction or redox reaction.

Learn more about oxidation-reduction reactions, here:

https://brainly.com/question/16867778

#SPJ2

molar mass of A1C1 3

Answers

Answer:

Gold(III) chloride

The breaking buffer that we use this week contains 10mM Tris, pH 8.0, 150mM NaCl. The elution buffer is breaking buffer that also contains 300mM imidazole. Describe how the instructor made the 0.25L elution buffer for all the students this week given 500ml of 1M of Tris (121.1 g/mole) (pH8.0), 750ml of 5M NaCl (MW

Answers

Answer:

Explanation:

From the given information ;the objective is to determine how the instructor made the 0.25L elution buffer

0.25 L elution buffer = 250 mL elution butter

The breaking buffer that we use this week contains

10mM Tris    =   0.01 M

150mM NaCl  =   0.15 M

300mM imidazole.  = 0.3 M

The stock concentration  of Tris in 1M

Therefore ; by using the formula: [tex]M_1V_1 = M_2 V_2[/tex]; we can determine the volume in the preparation; so;

[tex]1*V_1 = 0.0 1 \ M * 250 \ mL[/tex]

[tex]V_1 = \dfrac{0.0 1 \ M * 250 \ mL}{1 }[/tex]

[tex]V_1 = 2.5 \ mL[/tex]

In NaCl, The amount of stock concentration is 5 M

so; using the same formula; we have:

[tex]5*V_1 = 0.15 \ M * 250 \ mL[/tex]

[tex]V_1 = \dfrac{0. 15 \ M * 250 \ mL}{5 }[/tex]

[tex]V_1 = 7.5 \ mL[/tex]

From Imidazole ; the amount of stock concentration is

[tex]1*V_1 = 0.3 \ M * 250 \ mL[/tex]

[tex]V_1 = \dfrac{0. 3 \ M * 250 \ mL}{1 }[/tex]

[tex]V_1 = 75 \ mL[/tex]

Thus; we can have a table as shown as :

Stock concentration        volume to be added        Final concentration

1 M of Tris                              2.5 mL                            10 mM

5 M of  NaCl                          7.5 mL                             150 mM

1 M of Imidazole                    75  mL                            300  mM

In conclusion. the addition of all the volume make up the 250 mL elution buffer that is equivalent to 0.25 L.

The fluoride ion is the conjugate base of the weak acid hydrofluoric acid. The value of Kb for F-, is 1.39×10-11. Write the equation for the reaction that goes with this equilibrium constant.

Answers

Answer:

F⁻(aq) + H₂O(l) ⇄ HF(aq) + OH⁻(aq)

Explanation:

According to Brönsted-Lowry acid-base theory, an acid is a substance that donates H⁺ ions. In this sense, hydrofluoric acid is an acid according to the following equation.

HF(aq) + H₂O(l) ⇄ F⁻(aq) + H₃O⁺(aq)

According to Brönsted-Lowry acid-base theory, a base is a substance that accepts H⁺ ions. In this sense, the fluoride ion is a base according to the following equation.

F⁻(aq) + H₂O(l) ⇄ HF(aq) + OH⁻(aq)

The equilibrium constant for this reaction is Kb = 1.39 × 10⁻¹¹.

A sample of thallium(III) peroxide, Tl2(O2)3, contains 2.45 mol of thallium(III) ions. The number of moles of peroxide ions in the sample is

Answers

Answer:

The correct answer is 3.675 moles.

Explanation:

Based on the question, the reaction taking place is,  

Tl₂(O₂)₃ ⇒ 2Tl⁺³ + 3O₂⁻²

Thus, 1 mole of thallium peroxide comprise 2 moles of thallium and 3 moles of peroxide ions.  

However, based on the given question, a sample of thallium peroxide comprise 2.45 moles of thallium ions. The moles of peroxide ions present in the sample will be,  

= 2.45 × 3 / 2

= 3.675 moles.  

Hence, the moles of peroxide ions present in the given sample is 3.675.  

Which of the following errors could cause your percent yield to be falsely high, or even over 100%?

Select ALL that apply.

A.) Heating the sample too vigorously.
B.) Handling the crucible directly with your hands.
C.) Failing to completely decompose the sodium bicarbonate sample.
D.) Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements.
E.) Taking the mass of all samples with the lid included.

Answers

Answer:

B.Handling the crucible directly with your hands.

D.Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements.

E.Taking the mass of all samples with the lid included.

Explanation:

When observed critically , the measures associated with the errors which could cause your percent yield to be falsely high, or even over 100% are those which increase the weight of the substance with the individual neglecting.

Handling the crucible directly with your hands,Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements and taking the mass of all samples with the lid included will all increase the weight of the substance. Instead the substance should be placed alone without any form of support or contamination.

Unscramble the following words to form a complete
sentence about the cycles of nature:

limited is through environment Matter recycled the on Earth is and

Answers

Answer:

recycled is limited through enviroment and matter on earth

Explanation:

For the iodine trichloride molecule: a. Determine the number of valence electrons for each atom in the molecule b. Draw the Lewis Dot structure c. Describe why the molecule is drawn this way (i.e. any extra rules/steps needed?) d. Show the polarity of each bond and for the molecule by drawing in the dipole +à

Answers

Answer:

Explanation:

a. Determine the number of valence electrons for each atom in the molecule

In this case we both atoms are halogens. Therefore we will have 7 electrons for each atom.

b. Draw the Lewis Dot structure

In this case, the formula is [tex]ICl_3[/tex], so the central atom would be "I" and the "Cl" atoms would be placed around "I". See figure 1

c. Describe why the molecule is drawn this way (i.e. any extra rules/steps needed?)

In this specific case, the "I" atom don't follow the octet rule. We will have an expanded octet for iodine (more than 8 electrons).

d. Show the polarity of each bond and for the molecule by drawing in the dipole +d

The negative dipole would be placed in the atom with higher electronegativity, in this case "Cl". The positive dipole would be placed in the atom with low electronegativity, in this case "I".

I hope it helps!

During lab, you evaluated the bond order and bond length of a series of carbon-carbon bonds. Use the same concepts to predict the bond order and bond length of a series of nitrogen-nitrogen bonds.(a) Which of the structures below have a nitrogen-nitrogen bond order of 3?(b) Which of the structures below have the shortest nitrogen-nitrogen bond?

Answers

Answer:

N≡N

Explanation:

The image attached shows the nitrogen compounds that are being referred to in the question.

There are certain things we ought to know in order to answer the question accurately.

The bond order of a compound is equal to the number of bonds between two atoms. The greater the bond order, the shorter the bond length between the two atoms.

N≡N has a bond order of three, this is the highest bond order among all the species listed in the question. Hence it has the shortest bond length among the trio. Hence the answer.

Suppose the amount of a certain radioactive substance in a sample decays from to over a period of days. Calculate the half life of the substance. Round your answer to significant digit.

Answers

The given question is incomplete, the complete question is:

Suppose the amount of a certain radioactive substance in a sample decays from 1.30 mg to 100. ug over a period of 29.5 days. Calculate the half life of the substance Round your answer to 2 significant digits.

Answer:

The correct answer is 7.974 days.

Explanation:

Based on the given question, the concentration of a radioactive substance present in a sample get decays to 100 micro grams from 1.30 milligrams in 29.5 days. There is a need to find the half-life of the substance.  

Radioactive decay is an illustration of first order reaction.  

K = (2.303 / t) log [a/(a-x)]

Here a is 1.30 mg and (a-x) is 100 micrograms = 100 * 10^-3 mg or 0.1 mg, and t is 29.5 days. Now putting the values we get,  

K = (2.303 /29.5)log (1.30/0.1)

= 2.303/29.5 log13

= 2.303/29.5 * 1.1139

K = 0.0869

The half-life or t1/2 is calculated by using the formula, 0.693 / K

= 0.693 / 0.0869

= 7.974 days.  

which statement describes the reactions in an electrochemical cell

Answers

Answer & explanation:

Summary on electrochemical cells and redox reactions:

Electrochemical cells (or batteries) can be defined as devices capable of transforming chemical energy into electrical energy through spontaneous reactions of redox, in which electron transfer occurs.

Redox it is a chemical reaction in which there is the occurrence of oxidation and reduction of atoms of substances (chemical species) present in the process.

Oxidation is the loss of electrons by an atom of a chemical species, while reduction is the gain of electrons by an atom of a chemical species.

Thus, during an oxirreduction reaction, electrons move from the species that loses them towards the species that will receive them. This "movement" results in the formation of an electric current (or electrical energy) as occurs with batteries, for example.

What mass of carbon dioxide is produced from the complete combustion of 7.30×10−3 g of methane?

Answers

We know that the reaction goes to completion, so all the methane will be reacted. To find the mass of carbon dioxide used, we can use the number of moles from the above equation, and the molecular weight of CO2 (= 44.009 g/mol). The mass of CO2 produced is 3.29*10^-3g.

Identify the Lewis acids and Lewis bases in the following reactions:
1. H+ + OH- <-> H2O Lewis acid: Lewis base:
2. Cl- + BCl3 <-> BCl4- Lewis acid: Lewis base:
3. K+ + 6H2O <-> K(H2O)6+ Lewis acid: Lewis base:

Answers

Answer: 1. [tex]H^++OH^-\rightarrow H_2O[/tex]  Lewis acid : [tex]H^+[/tex], Lewis base : [tex]OH^-[/tex]

2. [tex]Cl^-+BCl_3\rightarrow BCl_4^-[/tex] Lewis acid : [tex]BCl_3[/tex], Lewis base : [tex]Cl^-[/tex]

3. [tex]K^++6H_2O\rightarrow K(H_2O)_6[/tex] Lewis acid : [tex]K^+[/tex], Lewis base : [tex]H_2O[/tex]

Explanation:

According to the Lewis concept, an acid is defined as a substance that accepts electron pairs and base is defined as a substance which donates electron pairs.

1. [tex]H^++OH^-\rightarrow H_2O[/tex]

As [tex]H^+[/tex] gained electrons to complete its octet. Thus it acts as lewis acid.[tex]OH^-[/tex] acts as lewis base as it donates lone pair of electrons to electron deficient specie [tex]H^+[/tex].

2. [tex]Cl^-+BCl_3\rightarrow BCl_4^-[/tex]

As [tex]BCl_3[/tex] is short of two electrons to complete its octet. Thus it acts as lewis acid. [tex]Cl^-[/tex] acts as lewis base as it donates lone pair of electrons to electron deficient specie [tex]BCl_3[/tex].

3. [tex]K^++6H_2O\rightarrow K(H_2O)_6[/tex]

As [tex]K^+[/tex] is short of electrons to complete its octet. Thus it acts as lewis acid. [tex]H_2O[/tex] acts as lewis base as it donates lone pair of electrons to electron deficient specie [tex]K^+[/tex].

In E. coli, the enzyme hexokinase catalyzes the reaction: Glucose + ATP → glucose 6-phosphate + ADP The equilibrium constant, Keq, is 7.8 x 102. In the living E. coli cells, [ATP] = 7.9 mM; [ADP] = 1.04 mM, [glucose] = 2 mM, [glucose 6-phosphate] = 1 mM. Determine if the reaction is at equilibrium. If the reaction is not at equilibrium, determine which side the reaction favors in living E. coli cells.

Answers

Answer:

Explanation:

Glucose + ATP → glucose 6-phosphate + ADP The equilibrium constant, Keq, is 7.8 x 102.

In the living E. coli cells,

[ATP] = 7.9 mM;

[ADP] = 1.04 mM,

[glucose] = 2 mM,

[glucose 6-phosphate] = 1 mM.

Determine if the reaction is at equilibrium. If the reaction is not at equilibrium, determine which side the reaction favors in living E. coli cells.

The reaction is given as

Glucose + ATP → glucose 6-phosphate + ADP

Now reaction quotient for given equation above is

[tex]q=\frac{[\text {glucose 6-phosphate}][ADP]}{[Glucose][ATP]}[/tex]

[tex]q=\frac{(1mm)\times (1.04 mm)}{(7.9mm)\times (2mm)} \\\\=6.582\times 10^{-2}[/tex]

so,

[tex]q<<K_e_q[/tex] ⇒ following this criteria the reaction will go towards the right direction ( that is forward reaction is favorable  until q = Keq

a introduction paragraph about coal and natural gas

Answers

Answer:

here is ur and

Explanation:

Coal, oil and natural gas are called fossil fuels. Fossil fuels are burned to make energy. Burning fossil fuels also releases CO2 (carbon dioxide) gas into the atmosphere. Most air pollutants (such as sulfur dioxide) don't stay in the atmosphere very long.

pls mark.me as brainliest

dropping an Alka-Seltzer tablet into a glass of water _________________________________________ b. bleaching a stain _________________________________________ c. burning a match _________________________________________ d. rusting of an iron nail

Answers

Answer:

Hi there!

When dropping Alka-Seltzer into a glass of water, bubbles immediately appear and the solid substance “disappears”, dissolves, into the water. This forms a new compound, a liquid, which means a reaction took place.

Given a K value of 0.43 for the following aqueous equilibrium, suppose sample Z is placed into water such that it’s original concentration is 0.033 M. Assume there was zero initial concentration of either A(aq) or B(aq). Once equilibrium has occurred, what will be the equilibrium concentration of Z?
2A(aq) + B(aq) <> 2Z (aq)

Answers

Answer:

[Z] = 0.00248M

Explanation:

Based in the reaction:

2A(aq) + B(aq) ⇄ 2Z (aq)

K of the reaction is defined as:

K = [Z]² / [A]²[B] = 0.43

If you add, in the first, just 0.033M of  Z, concentrations in equilibrium are:

[Z] = 0.033M - 2X

[A] = 2X

[B] = X

Replacing in K equation:

0.43 = [0.033M - 2X]² / [2X]² [X]

0.43 = [0.033M - 2X]² / [2X]² [X]

0.43 = 4X² -0.132X + 0.001089 / 4X³

1.72X³ - 4X² + 0.132X - 0.001089 = 0

Solving for X:

X = 0.01526M

Replacing, concentration in equilibrium of Z is:

[Z] = 0.033M - 2*0.01526M = 0.00248M

Answer:

Less than 0.033 M

Explanation:

Hello,

In this case, given the equilibrium:

[tex]2A(aq) + B(aq) \rightleftharpoons 2Z (aq)[/tex]

Thus, the law of mass action is:

[tex]K=\frac{[Z]^2}{[A]^2[B]}[/tex]

Nevertheless, given the initial concentration of Z that is 0.033 M, we should invert the equilibrium since the reaction will move leftwards:

[tex]\frac{1}{K} =\frac{[A]^2[B]}{[Z]^2}=2.33[/tex]

Know, by introducing the change  due to the reaction extent, we can write:

[tex]2.33=\frac{(2x)^2*x}{(0.033M-2x)^2}[/tex]

Which has the following solution:

[tex]x_1=2.29M\\x_2=0.0181M\\x_3= 0.0153M[/tex]

But the correct solution is [tex]x=0.0153M[/tex]  since the other solutions make the equilibrium concentration of Z negative which is not possible. In such a way, its concentration at equilibrium is:

[tex][Z]_{eq}=0.033M-2*0.0153M=0.0024M[/tex]

Which is of course less than 0.033 M since the addition of a product shift the reaction leftwards in order to reestablish equilibrium (Le Chatelier's principle).

Regards.

Gold can be separated from sand by panning or by a sluice-box. In panning, water is mixed with the sand and the resulting slurry is swirled in a shallow, saucer-shaped metal pan. In the sluice-box technique, running water is passed over an agitated sand- gold mixture. What physical property and what technique make this separation possible?

Answers

Answer:

Decantation by means of difference in relative densities.

Explanation:

The specific gravity (relative density) of the gold to the soil/sand is the physical property exploited in panning gold. The particles with lower density would float whilst the heavier gold sinks lower to the bottom of the pan by gravity and is decanted off.

I hope this explanation is easy to comprehend.

¿What are the units that make up the 3 quantities (mass, volume of a substance and density)?

Answers

Answer:

Grams , centimeters cubed, and grams per centimeter

Explanation:

Consider a cobalt-silver voltaic cell that is constructed such that one half-cell consists of the cobalt, Co, electrode immersed in a Co(NO3)3 solution, and the other half-cell consists of the silver, Ag, electrode immersed in a AgNO3 solution. The two electrodes are connected by a copper wire. The Co electrode acts as the anode, and the Ag electrode acts as the cathode. To maintain electric neutrality, you add a KNO3 salt bridge separating the two half-cells. Use this information to solve Parts B, C, and D.
A. The half-cell is a chamber in the voltaic cell where one half-cell is the site of the oxidation reaction and the other half-cell is the site of the reduction reaction.
Type the half-cell reaction that takes place at the anode for the cobalt-silver voltaic cell. Indicate the physical states using the abbreviation (s), (l), or (g) for solid, liquid, or gas, respectively. Use (aq) for an aqueous solution. Do not forget to add electrons in your reaction.
B. The half-cell is a chamber in the voltaic cell where one half-cell is the site of an oxidation reaction and the other half-cell is the site of a reduction reaction.
Type the half-cell reaction that takes place at the cathode for the cobalt-silver voltaic cell. Indicate physical states using the abbreviation (s), (l), or (g) for solid, liquid, or gas, respectively. Use (aq) for an aqueous solution. Do not forget to add electrons in your reaction.

Answers

Answer:

Anode half reaction;

Co(s) ----> Co^2+(aq) + 2e

Cathode half reaction;

2Ag^+(aq) + 2e-------> 2Ag(s)

Explanation:

A voltaic cell is an electrochemical cell that spontaneously produces electrical energy from chemical reactions. A voltaic cell comprises of an anode (where oxidation occurs) and a cathode (where reduction occurs). The both electrodes are connected with a wire . A salt bridge ensures charge neutrality in the anode and cathode compartments. Electrons flow from anode to cathode.

For the cell referred to in the question;

Anode half reaction;

Co(s) ----> Co^2+(aq) + 2e

Cathode half reaction;

2Ag^+(aq) + 2e-------> 2Ag(s)

Nitrogen forms more oxides than any other element. The percents by mass of in three different nitrogen oxides are (1) (II) and (III) 25.94 For each compound, determine (a) the simplest whole-number ratio of to and (b) the number of grams of oxygen per 1.00 of nitrogen.

Answers

Complete question;

Nitrogen forms more oxides than any other element. The percents by mass of N in three different nitrogen oxides are (|) 46.69%;(II) 36.85 %; (III) 25.94%. For each compound, determine (a) the simplest whole-number ratio of N to O, and (b) the number of grams of oxygen per 1.00 g of nitrogen.

Answer:

a. (i) The ratio is 1:1 , the formula = NO  (ii)The ratio is 1 : 1.5 which is  2 : 3, the formula = N₂O₃  (iii) The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅

b. (i)number of grams of oxygen = 53.31/46.69 = 1.14 g

(ii)number of grams of oxygen = 63.15/36.8 = 1.71 g

(iii)number of grams of oxygen = 74.06/25.94 = 2.855 g

Explanation:

a.

(i) The percentage by mass of the nitrogen in Nitrogen oxide (i) is 46.69% which is taken as 46.69 grams . Since the other element is oxygen the mass of oxygen will be 100 - 46.69 = 53.31 grams.

The relative atomic mass of Nitrogen and oxygen is 14 amu and 16 amu respectively.

Therefore, to know the whole number ratio of N and O we find the number of moles.

number of moles of N = 46.69/14 = 3.335

number of moles of O = 53.31/16 = 3.332

The ratio is 1:1 , the formula = NO

(ii)

number of moles of N = 36.85/14 = 2.632

number of moles of O = 63.15/16 = 3.947

The ratio is 1 : 1.5 which is  2 : 3, the formula = N₂O₃

(iii)

number of moles of N = 25.94/14 = 1.85

number of moles of O = 74.06/16 = 4.63

The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅

b.

(i) 46.69 g of nitrogen  = 53.31 g of oxygen

1 g of nitrogen = ? of Oxygen

number of grams of oxygen = 53.31/46.69 = 1.14 g

(ii)

Using similar method in b(i)

number of grams of oxygen = 63.15/36.8 = 1.71 g

(iii)

Using similar method in b(i)

number of grams of oxygen = 74.06/25.94 = 2.855 g

What will be the final temperature when a 25.0 g block of aluminum (initially at 25 °C) absorbs 10.0 kJ of heat? The specific heat of Al is 0.900 J/g·C.

Answers

LET'S PUT IN WHAT WE KNOW!!!
Q
=
725 J
m
=
55.0 g
c
=
0.900 J/(°C⋅g)
Δ
T
=
final temperature - initial temperature
Δ
T
=
(
x

27.5
)
°C
We solve for
Δ
T
.
725 J
=
55.0 g

0.900 J/(°C⋅g)
(
x

27.5
)
°C
NOW IT'S JUST BASIC ALGREBRA
725
=
49.5
x

1361
2086
=
49.5
x
42.1
=
x
The final temperature is 42.1 °C.

42.1°C is the final temperature when a 25.0 g block of aluminum (initially at 25 °C) absorbs 10.0 kJ of heat.

What is temperature?

The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature. Thermometers are calibrated using a variety of temperature scales, which historically defined distinct reference points or thermometric substances.

The most popular scales include the Celsius scale, sometimes known as centigrade, with the unit symbol °C, the scale of degrees Fahrenheit (°F), or the Kelvin scale (K), with the latter being mostly used for scientific purposes. One of the United Nations System of Units' (SI) seven base units is the kelvin.

Q=725 J

m=55.0 g

c=0.900 J/(°C⋅g)

ΔT=final temperature - initial temperature

ΔT=(x−27.5)°C

725 J=55.0 g⋅0.900 J/(°C⋅g)(x−27.5)

X=42.1°C

Therefore, 42.1°C is the final temperature when a 25.0 g block of aluminum (initially at 25 °C) absorbs 10.0 kJ of heat.

To know more about temperature, here:

https://brainly.com/question/23411503

#SPJ2

A scientist mixed 25.00 mL of 2.00 M KOH with 25.00 mL of 2.00 M HBr. The temperature of the mixed solution rose from 22.7 oC to 31.9 oC. Calculate the enthalpy change for the reaction in kJ/mol HBr, assuming that the calorimeter loses negligible heat, that the volumes are additive, and that the solution density is 1.00 g/mL, and that its specific heat is 4.184 J/g.oC.

Answers

Answer:

38.493 KJ/mol

Explanation:

Equation of reaction; HBr + KOH ---> KBr + H2O

Heat evolved = mass * specific heat capacity * temperature rise

Mass of solution = density * volume

Mass = 1.00 g/ml*50 ml = 50g

Temperature rise = 31.9 - 22.7 = 9.2 °C

Heat evolved = 50 * 4.184 * 9.2 = 1924.64 J

From the equation of reaction, 1 mole of HBr reacts with 1mole of KOH to produce 1 mole of H20

Number of moles of HBr involved in the reaction = molar concentration * volume (L)

Molar concentration = 2.0 M, volume = 25 ml = 0.025 L

Number of moles = 2.0 M * 0.025 L= 0.05 moles

Therefore, 0.05 moles of HBr reacts with 0.05 moles of KOH to produce 0.05 moles of H20

Enthalpy change per mole of HBr = 1924.64 J/0.05 moles = 38492.8 J/mol = 38.493 KJ/mol

A compound D with the molecular formula C6H12 is optically inactive but can be resolved into enantiomers. On catalytic hydrogenation, D is converted to E (C6H14) and E is optically inactive. Propose structures for D and E. (Draw a three-dimensional formula for each using dashes and wedges around chiral centers.)

Answers

Answer:

D: CH2=CH-CH(CH3)-CH2-CH3 (R & S enantiomers)

E: CH3-CH2-(CH3)-CH2-CH3

(Please see the figures enclosed )

Explanation:

D is a racemic mixture (R & S) of 3-metyl-pent-1-ene, so it is optically inactive (although each of two enantiomers is optically active, the mixture is optically  inactive. The reason is that two enantiomers are present in an equal amount).

E is optically inactive, so its structure has to be symmetric.

Pyruvate is the end product of glycolysis. Its further metabolism depends on the organism and on the presence or absence of oxygen. Draw the structure of the product from each reaction as it would exist at pH 7. Include the appropriate hydrogen atoms. Reaction A: aerobic conditions in humans or yeast

Answers

The given question is incomplete. The image present in the question for Reaction A is attached below along with the answer.

Explanation:

Pyruvate molecule reacts with Coenzyme A in the presence of oxygen and it results in the formation of acetyl Coenzyme A and carbon dioxide.

The enzyme pyruvae dehydrogenase helps in catalyzing this reaction. As in this biochemical reaction [tex]NAD^{+}[/tex] gets converted into NADH.

This reaction is shown in the image attached below.  

Which of the following best describe an atomic number? An element identity is defined by its atomic number this means it represents the number of

Answers

a)Atomic number is the number of protons in the nucleus of an atom.

b)atomic number represents the number of protons

An element's identity is defined by its atomic number; this means it represents the number of protons in its nucleus.

The question is incomplete, the complete question is;

Which of the following best describes an atomic number? An element's identity is defined by its atomic number; this means it represents the number of

A) protons plus neutrons in its nucleus.

B) electrons in the element.

C) protons in its nucleus.

D) neutrons in its nucleus.

The subatomic particles in the atom are;

ElectronsProtonsNeutrons

Neutrons and protons are contained in the nucleus hence they are collectively called nucleons.

Electrons are found in the orbits. The number of protons must be equal to the number of electrons for the atom to be electrically neutral.

The number of protons in an atom or atomic number serve as a means of identifying an atom.

Learn more; https://brainly.com/question/18460120

A chemistry student weighs out of an unknown solid compound and adds it to of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.

Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .

Answers

Complete Question

A chemistry student weighs out 0.950 kg  of an unknown solid compound and adds it to 2.00 L of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.

Required:

a. Using the information above, can you calculate the solubility of X?

b. If so, calculate it. Remember to use the correct significant digits and units. .

Answer:

a

Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate  1 unit volume of the solvent solution at that given temperature.

And from our question we see that substance  X saturated the solvent and there is  still remained undissolved substance X

b

The solubility of X is  [tex]S = 190 g /L[/tex]

Explanation:

From the question we are told that

    The initial mass of the unknown solid is [tex]m_i =0. 950 \ kg[/tex]

    The mass of the undissolved substance is  [tex]m_u = 0.570 \ kg[/tex]

    The volume of the solution is  [tex]V =2.00\ L[/tex]

Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate  1 unit volume of the solvent solution at that given temperature.

And from our question we see that substance  X saturated the solvent and there is  still remained undissolved substance X

The mass of the substance that dissolved ([tex]m_d[/tex] ) is mathematically represented as

    [tex]m_d = m_i - m_u[/tex]

  [tex]m_d = 0.95 - 0.570[/tex]

    [tex]m_d = 0.38 \ kg = 0.38 *1000 = 380 g[/tex]

The solubility of this substance (X) is mathematically represented as

      [tex]S = \frac{m_d}{V}[/tex]

substituting values

     [tex]S = \frac{ 380}{2}[/tex]

     [tex]S = 190 g /L[/tex]

   

Other Questions
North Star prepared the following unadjusted trial balance at the end of its second year of operations ending December 31. Account Titles Debit Credit Cash $ 12,800 Accounts Receivable 6,800 Prepaid Rent 2,560 Equipment 21,800 Accumulated Depreciation $ 1,080 Accounts Payable 1,080 Income Tax Payable 0 Common Stock 25,600 Retained Earnings 2,900 Sales Revenue 52,400 Salaries and Wages Expense 25,800 Utilities Expense 13,300 Rent Expense 0 Depreciation Expense 0 Income Tax Expense 0 Totals $ 83,060 $ 83,060 Other data not yet recorded at December 31: Rent expired during the year, $1,280. Depreciation expense for the year, $1,080. Utilities used and unpaid, $9,800. Income tax expense, $470. Prepare the adjusting journal entries required at December 31. (If no entry is required for a transaction/event, select "No Journal Entry Required" in the first account field.) 6x + 3y = 92x + 3y = 1Solve the system of equations.A)x = 2, y = -1B)x = -1, y = 2C)x=1/2,y=3D)x=3,y=-1/2 Statistics show that less massive vehicles tend to have fewer accidents than more massive vehicles. However, the survival rate for accidents in more massive vehicles is much greater than for less massive ones. How could momentum be used to explain these findings? e65. the perpendicularbisector of thesegment withendpoints (-5/2,-2)and (3, 5)HELP PLEASE! Picture included! Please answer this correctly Which two sentences in this excerpt from Emmuska Orczy's The Scarlet Pimpernel show the perspective that the French Revolution was barbaric? A surging, seething, murmuring crowd of beings that are human only in name, for to the eye and ear they seem naught but savage creatures, animated by vile passions and by the lust of vengeance and of hate. The hour, some little time before sunset, and the place, the West Barricade, at the very spot where, a decade later, a proud tyrant raised an undying monument to the nation's glory and his own vanity. During the greater part of the day the guillotine had been kept busy at its ghastly work: all that France had boasted of in the past centuries, of ancient names, and blue blood, had paid toll to her desire for liberty and for fraternity. The carnage had only ceased at this late hour of the day because there were other more interesting sights for the people to witness, a little while before the final closing of the barricades for the night. And so the crowd rushed away from the Place de la Greve and made for the various barricades in order to watch this interesting and amusing sight. It was to be seen every day, for those aristos were such fools! They were traitors to the people of course, all of them, men, women, and children, who happened to be descendants of the great men who since the Crusades had made the glory of France: her old NOBLESSE. Their ancestors had oppressed the people, had crushed them under the scarlet heels of their dainty buckled shoes, and now the people had become the rulers of France and crushed their former mastersnot beneath their heel, for they went shoeless mostly in these daysbut a more effectual weight, the knife of the guillotine. What does rationing means In history I WILL MARK YOU BRAINLIEST!!!! HELP PLZZ What is ethanol? What does ethanol do in our system (as it pertains to drinking alcohol?) What is the relatively small size of the ethanol size important Which person will most likely hear the loudest sound?ABCD (: Please answer both questions :)First person gets 50 points! While making oatmeal cookies, Angela needs to add cup of milk to her dough. However, she has only a -cup measuring cup. How many times does she need to fill the measuring cup to pour cup of milk? The number of times Angela needs to fill the -cup measuring cup to pour cup of milk is . A glucose solution is administered intravenously into the bloodstream at a constant rate r. As the gulcose is added, it is converted into other substances and removed from the bloodstream at a rate that is proportional to the concentration at the time. Thus a model for the concentration C=C(t) of the glucose solution in the bloodstream isdC/dt=r-kCWhere r an dk are positive constants.1. Suppose that the concentration at time t=0 is C0. Determine the concentration at any time t by solving the differential equation.2. Assuming that C0 Please help! Read the question below! In trapazoid abcd ab is parallel to dc, bc is perpendicular to dc determine the measure of d to the nearest degree and find the lemgth of ad in simplest radicial form Read about John Deere's code of ethics and progress on social responsibility efforts. Consider how the two are integrated. Research a code of ethics from an organization of your choice and discuss your findings with your classmates. Purpose: To apply your learning to an actual company and evaluate their current ethical position. Instructor: May participate in the discussion and will grade your contribution. Initial Post Instructions Research an ethics code or formal ethics statement from a company or organization of your choice by conducting an internet search. An example of a code of ethics is found here: John Deere's Code of Ethics. What option is the same as 1/5^-3? A. -1/125 B. -1/15 C. 15 D. 125 need answered ASAP pleaseee I NEED HELP PLEASE, THANKS! Why were written laws needed as early societies became larger and more complex? Please explain. can someone help me please