Lucia wants to change the motion map shown so that it’s shows uniform circular motion. What change should Lucia make ?

Here, the calculated Magnitude of the load P is 2945.2 kN, the Longitudinal strain produced is 0.0005 and the decrease in length is 2 mm.

Given,

Length, L = 4 m

Outer diameter, D = 300mm, D= 0.3 m

Thickness, t = 50 mm, t = 0.05 m

Stress produced, σ = 75000 kN/m²

Young's modulus for cast iron, E = 1.5 x 10⁸ kN/m²

Calculating the diameter of the cylinder,

Diameter of cylinder, d = (D) – (2t) = 0.3 –( 2 × 0.05)

d= 0.2 m

(i) Magnitude of the load P:

Using the relation, σ =P/A

P = σ × A = 75000 × π /4 (D² – d² )

P= 75000 × π/4 (0.3² – 0.2²)

P= 75000 × π/4 (0.09 – 0.04)

P = 2945.2 kN

Hence, Magnitude of the load P is 2945.2 kN.

(ii) Longitudinal strain produced, e :

Using the relation, Strain, (e) = stress/E

e= 75000/(1.5 x 10⁸)= 0.0005

Hence, the Longitudinal strain produced is 0.0005.

(iii)Total decrease in length, dL:

The total decrease in length can be calculated using the strain as the ratio of change in length to the original length is known as Strain.

Strain = change in length/original length

e= dL/L

0.0005 = dL/4

dL = 0.0005 × 4m = 0.002m=2mm

Hence,the decrease in length is 2 mm.

Learn more about Elasticity here:

https://brainly.com/question/15230910

#SPJ10

Answer:

full explanation and answer is on the picture

The bomb strike the ground relative to the point at 1km . B

Using the equation

h = 1/2 gt^2

500 = 1/2 * 10* t^2

500 = 5t^2

t = √500/5

t = √100

t = 10seconds

To find the distance,

Distance = velocity * time

Distance = 100 ÷ 10

Distance = 1000m = 1km

Therefore, the bomb strike the ground relative to the point at 1km . B

Learn more about projectile distance here:

https://brainly.com/question/15502195

#SPJ1

Answer:

λ = c / f     or    f = c / λ

f = 3.0E8 / 4.0E-7 = .75E15 / sec = 7.5E14 / sec = 7.5 X 10^14 /sec

Answer:

i dond no can you put another question

The time taken for the plant to hit the ground from a distance of 7.01m and at a velocity of 8.84m/s is 1.59s.

The time taken for a motion to occur can be calculated using the following formula:

v² = u² - 2as

Where;

8.84² = 0² + 2 × a × 7.01

78.15 = 14.02a

a = 5.57m/s²

V = u + at

8.84 = 0 + 5.57t

t = 1.59s

Therefore, the time taken for the plant to hit the ground from a distance of 7.01m and at a velocity of 8.84m/s is 1.59s.

Learn more about time at: https://brainly.com/question/13170991

#SPJ1

Answer: the plot that you see is called a blackbody spectrum. This plot tells us the intensity or the amount of light that an object will emit at different wavelenths.

Explanation: i hope that this helps

The proper connection between kinetic energy and speed is depicted in Graph D.

The kinetic energy (KE) is defined as one-half of the mass times multiplied by the square of velocity.

[tex]\rm KE = \frac{1}{2}mv^2[/tex]

where,

KE is the kinetic energy

m is the mass of each molecule

(V) is the  velocity

As the square of the velocity is exactly proportional to kinetic energy. Consequently, the relationship between velocity and kinetic energy must be parabolic.

The proper connection between kinetic energy and speed is depicted in Graph D. Graph showing the link between kinetic energy on the y-axis and speed on the x-axis.

On the y-axis, a semi-curve line begins above the origin and ascends as it accelerates.

To learn more about the kinetic energy refer to the link;

https://brainly.com/question/12669551

#SPJ1

The force exerted by student A with his scooter is 306 N and that of student B is 204 N.

The force exerted by each student is calculated from Newton's second law of motion.

F = ma

where;

F(A) = 127.5 x 2.4

F(A) = 306 N

F(B) = 120 x 1.7

F(B) = 204 N

Thus, the force exerted by student A with his scooter is 306 N and that of student B is 204 N.

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

At maximum height, velocity is zero and kinetic energy will be zero.

K.E(A) = 0

P.E(A) = mgh = 200 x 9.8 x 30 = 58,800 J

K.E(B) = P.E(A) - P.E(B)

K.E(B) = 58,800 J - (200 x 9.8 x 25)

K.E(B) = 58,800 J - 49,000 J

K.E(B) = 9,800 J

K.E = ¹/₂mv²

v² = 2K.E/m

v² = (2 x 9800)/(200)

v² = 98

v = √98

v = 9.9 m/s

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

Answer:

See below

Explanation:

Alcohol first goes slightly down because of the expansion of the glass of thermometer before doing up.

[tex]\rule[225]{225}{2}[/tex]

The magnitude of the vector is 34.092 N

The resultant is the square root of sum of square of the vector component of x and y direction.

R =√ [(Nx)² +(Ny)²]

Given is the vector with horizontal length of the vector = -28.7 m and the vertical length of the vector = 18.4 m

The resultant will be

R =√ [(-28.7)² +(18.4)²]

R = 34.092 N

Thus, the magnitude of the vector is  34.092 N.

Learn more about resultant.

https://brainly.com/question/12784665

#SPJ1

Answer:

71m/s

Explanation:

when you convert it you get 158.822 miles per hour

Answer:

a magnetic force

Explanation:

a) Mirrors

Mirror requires the high luster of metals in order to work.

When light shine on to the surface of a metal, its electrons absorb small amounts of energy and become excited into one of its many empty orbitals.

The electrons immediately fall back down to lower energy levels and emit light.

This process is responsible for the high luster of metals.

Here,

Mirrors have metal coating on its back side, because of high reflective property , high lustrous mirror is preferred . When metal is more lustrous, the less light reflect into it and bounces back.

Coating one side of a piece of glass with shiny metals can turn it into a mirror, reflecting light coming toward it.

Window glass can reflect only eight percent of light hitting it, while mirrors can reflect 95 percent of light hitting them.

The glass in a mirror is usually coated with a layer of silver or aluminum.

Mirrors are shiny because when photons (rays of light) coming from an object , it strike the smooth surface of a mirror, then they bounce back at the same angle. Our eyes see these reflected photons as a mirror image.

Therefore,

Mirror requires the high luster of metals in order to work.

Learn more about properties of metal here:

https://brainly.com/question/18153051

#SPJ1

Answer:A) mirrors

Explanation:

The average velocity of the particle from rest to 9 seconds would be 2 meters/sec.

This average velocity can be calculated with the following equation:

v = dx / dt

where:

dx = displacement = 18 meters

dt = interval of time = 9 seconds

Substitute;

v = dx / dt

v = 18 / 9

v = 2 meters/sec

Hence, the average velocity of the particle from rest to 9 seconds would be 2 meters/sec.

Learn more about velocity here;

https://brainly.com/question/14434909

#SPJ1

Answer:

212N/m

Explanation:

First of all, what is spring constant
As per Hooke's law, The restoring force applied by the spring is proportional to the change in length, and restoring force is directed towards the equilibrium position. The proportionality constant is called the spring constant and it is a measure of the stiffness of the spring. So as Hooke's law

F = -Kx

Where

F -> Restoring force

K-> Spring constant

x -> change in length

the negative sign indicates it is acting toward the center

Rearranging this for the Spring constant, Spring constant formula is given by

k = Fx

Unit of Spring Constant is Newton/meter

The total mass of the galaxy is 443.4 Solar mass

Orbital velocity ([tex]v[/tex]) = [tex]\sqrt{\frac{MG}{R} }[/tex]

where M= weight of galaxy

G= gravitational constatnt = [tex]6.674*10^-^1^1[/tex] (given)

R = distance from centre = [tex]41200[/tex] Light years (given)= [tex]4.12*9.5*10^1^6[/tex]  km (1 ly= [tex]9.5*10^3[/tex] billion km)

v= orbital velocity = [tex]275[/tex]  [tex]km/s[/tex] (given)

∴ According to the formula

[tex](2.75*10^2)^2[/tex] = [tex]\frac{M*6.674*10^-^1^1}{4.12*9.5*10^1^6}[/tex]

⇒ [tex]7.56*10^4*4.12*9.5*10^1^6=M*6.674*10^-^1^1[/tex] (cross multiplying and expanding)

⇒ [tex]29.59*10^2^1=M*6.674*10^-^1^1[/tex]

⇒ [tex]\frac{29.59*10^2^1*10^1^1}{6.674}=M[/tex]

⇒ [tex]4.434*10^3^2=M[/tex]

1 solar mass = [tex]1.989*10^3^0 kg[/tex]

⇒ Mass in solar mass =443.4 Solar mass

⇒ M = 443.4 Solar mass

Learn more about Orbital velocity here :

https://brainly.com/question/22247460

#SPJ10

The total distance traveled by the gardener is 8 meters. the magnitude of total displacement is approximately 7 meters.

                                                                      = 8 meters

For the magnitude of displacement, we will take the shortest path for the gardener movement.

                              for displacement-

                                       [tex]=\sqrt{( 0-4^{2}) +( 6-0^{2} )}\\=\sqrt{52} \\=7[/tex](approximately)

learn more about Pythagoras' theorem here:

https://brainly.com/question/654982

#SPJ10

Answer:

Temperatures expressed in the Kelvin scale are D.) 273° higher than temperatures in the Celsius scale.

Explanation:

This answer is 110% correct guaranteed!

⭐⭐⭐⭐⭐ +

The speed of the first car just before the collision is 26.73 km/h.

When two bodies of different masses move together each other and have head on collision, they travel to same or different direction after collision.

The external force is not acting here, so the initial momentum is equal to the final momentum. For inelastic collision, final velocity is the common velocity for both the bodies.

m₁u₁ +m₂u₂ =(m₁ +m₂) v

Given a 808 kg automobile is sliding on an icy street. It collides with a parked car which has a mass of 632 kg. The two cars lock up and slide together with a speed of 15.0 km/h.

Second car is parked, so its velocity will be zero.

808 x u +632 x 0 = (808 +632 ) x 15

u  = 26.73 km/h

Thus, the speed of the first car just before the collision is 26.73 km/h

Learn more about conservation of momentum principle

https://brainly.com/question/14033058

#SPJ1

Answer:

If theta is equal to 90, then both projectiles strike at the same distance from the projection point and projectiles are in air for the same time interval.

Explanation:

Answer:hight

Explanation:

Hello!

Begin by plugging in the values for m and n. We get the equation for the velocity of the particle to be:
[tex]v(t) = 10 + 2t^2[/tex]

A.

To find the change in velocity over the interval (2s ≤ t ≤ 5s), we can simply find the difference in the velocities at these times.

[tex]\Delta v= v_f - v_i[/tex]

For this situation:
[tex]\Delta v = v(5) - v(2)[/tex]

Substitute these times for 't' into the equation and solve.

[tex]v(5) = 10 + 2(5^2) = 60 \frac{cm}{s}\\\\v(2) = 10 + 2(2^2) = 18 \frac{cm}{s}\\\\\Delta v = 60 - 18 = \boxed{42 \frac{cm}{s}}[/tex]

B.

To find the average acceleration, we must take the SLOPE of the velocity function over this interval using the slope formula:

[tex]a_{avg} = \frac{v_f - v_i}{\Delta t}[/tex]

Plug in the values for the particle's velocity at t = 2 s and 5 s that we solved for above.

[tex]a_{avg} = \frac{60- 18}{5 - 2}\\\\a_{avg} = \frac{42}{3} = \boxed{ 14 \frac{cm}{s^2}}[/tex]

C.

The instantaneous acceleration can be found by taking the derivative of the v(t) function using the power rule. Recall:
[tex]\frac{dy}{dx} x^n = nx^{n-1}[/tex]

Using this rule:
[tex]a(t) = v'(t) = 2(2t) = 4t[/tex]

Substituting in t = 2 s:
[tex]a(2) = 4(2) = \boxed{8 \frac{cm}{s^2}}[/tex]

Answer:

Their common velocity after the collision will be 5.5m/s

Explanation:

look at the attachment above ☝️

The value of x given the data from the question is 0.86 m

From the data given above, we can s determine the energy as follow:

E = mgh

E = 3 × 9.8 × 5

E = 147 J

E = ½Ke²

147 = ½ × 400 × x²

147 = 200 × x²

Divide both side by 200

x² = 147 / 200

Take the square root of both sides

x = √( 147 / 200)

x = 0.86 m

Since the block came to rest, there is no motion

Learn more about spring constant:

https://brainly.com/question/9199238

#SPJ1

The gauge pressure at bottom of vaccine solution will be 16 kPa

Positive pressure is another name for gauge pressure. When a system's internal pressure exceeds that of its surroundings, it is said to be under positive pressure. Any leak that develops in the positively pressured system will therefore escape into the outside world. In contrast, a negative pressure chamber draws air into it.

Given As seen in the illustration, a syringe is held vertically. The container carries a 3 cm tall column of vaccine solution and has an open inner diameter of 1 cm. The needle contains a 2 cm column of vaccine solution and has an open inner diameter of 0.5 mm. At the needle's open end, the solution is exposed to the air. The vaccination solution has a density of 1200 kg/m3.

We have to find the gauge pressure at bottom of vaccine solution

Since the 5N force is applied to vaccine solution the pressure exerted will be much more

Hence the gauge pressure at bottom of vaccine solution will be 16 kPa

Learn more about gauge pressure here:

brainly.com/question/25736513

#SPJ10

Answer:

i believe the answer is true

Hello!

We can use Faraday's Law of Electromagnetic Induction to solve.

[tex]\epsilon = -N \frac{d\Phi_B}{dt}[/tex]

ε = Induced emf (4.08 V)
N = Number of loops (?)

[tex]\Phi_B[/tex] = Magnetic Flux (Wb)
t = time (s)

**Note: The negative sign can be disregarded for this situation. The sign simply shows how the induced emf OPPOSES the current.

Now, we know that [tex]\frac{d\Phi_B}{dt}[/tex] is analogous to the change in magnetic flux over change in time, or [tex]\frac{\Delta \Phi_B}{\Delta t}[/tex], so:
[tex]\epsilon = N \frac{\Delta \Phi_B}{\Delta t}\\\\\epsilon = N \frac{\Phi_{Bf} - \Phi_{Bi}}{\Delta t}[/tex]

Rearrange the equation to solve for 'N'.

[tex]N = \frac{\epsilon}{ \frac{\Phi_{Bf} - \Phi_{Bi}}{\Delta t}}[/tex]

Plug in the given values to solve.

[tex]N = \frac{4.08}{ \frac{9.44*10^{-5} - 2.57*10^{-5}}{0.0154}} = 914.585 = \boxed{915 \text{ coils}}[/tex]

**Rounding up because we cannot have a part of a loop.

One support of the behavioral perspective is how  B. F. skinner’s ideas have brought to light how the environment and learning influence personality.

The behavioral perspective on personality and individual variations places an emphasis on quantifiable behaviors influenced by the environment and the results that follow.

The theoretical aim of behaviorism is the prediction and control of behavior given its natural science methodology.

Skinner's theories have made it clear how learning and the environment affect personality, which is one argument in favor of the behavioral approach.

One support of the behavioral perspective is how  B. F. skinner’s ideas have brought to light how the environment and learning influence personality.

To learn more about the behavioral perspective refer to;

https://brainly.com/question/14400788

#SPJ1