Answer:
bleach, hair spray,spay cleaner and idek
Explanation:
Which illustration is a closed circuit? * + A B
Answer:
I believe its B for sure
Hope this helps!
Explanation:
20 POINTS! NEED HELP
How many electrons does sulfur have to gain to achieve the Octet Rule?
1. 1 electron
2. 2 electrons
3. 3 electrons
4. 4 electrons
Answer:
Sulfur needs 2 more electrons to achieve octet in its valence shell.
Explanation:
According to the electronic configuration, 2 electrons are required to be gained by the sulfur to achieve the octet rule.
What is electronic configuration?
Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ6
Many inland areas around Florida contain extinct marine fossils. Which of the following statements best describes how this might have occurred?
Answer:
D
Explanation:
strong winds carried marine organisms inland where they were buried and fossilized under layer of sediment
Answer:
Strong winds carried marine organisms inland where they were buried and fossilized under layers of sediment.
Explanation:
how to rapidly separate red#40 from ZnO
Answer:
your question :how to rapidly separate red#40 from ZnO
answer :Red #40 is soluble in water while zinc oxide is not. 4- heat the solution of red #40 and water until water evaporates and red#40 remains
hope it's help
#carryONlearningTrial 12 1.Volume of Acid used ( mL) 2020 2.Molarity of acid used (M) 0.0160.016 3.Initial volume reading of base buret 018.6 4.Final volume reading of base used 18.636.9 5.Volume of base used (4-3, mL) _________ _________ 6.Molarity of base (1*2/5, M) _________ _________ 7.Average molarity of base _________
Answer:
[tex]V_B = 18.3mL[/tex] -- Volume of base used
[tex]M_B = 0.0175M[/tex] --- Molarity of base
Explanation:
Given
[tex]V_A = 20mL[/tex] -- Volume of acid used
[tex]V_B_1 = 18.6mL[/tex] --- Buret Initial reading
[tex]V_B_2 = 36.9mL[/tex] --- Buret Final reading
[tex]M_A = 0.016M[/tex] --- Molarity of the acid
Solving (a): Volume of base used (VB)
This is calculated by subtracting the initial reading from the final reading of the base buret.
i.e.
[tex]V_B = V_B_2 - V_B_1[/tex]
[tex]V_B = 36.9mL - 18.6mL[/tex]
[tex]V_B = 18.3mL[/tex]
Solving (b): Molarity base (MB)
This is calculated using:
[tex]M_A * V_A = M_B * V_B[/tex]
Make MB the subject
[tex]M_B = \frac{M_A * V_A }{V_B}[/tex]
This gives:
[tex]M_B = \frac{0.016M *20mL}{18.3mL}[/tex]
[tex]M_B = \frac{0.016M *20}{18.3}[/tex]
[tex]M_B = \frac{0.32M}{18.3}[/tex]
[tex]M_B = 0.0175M[/tex]
Solving (c): There is no such thing as average molarity
Which of the following is true?
A)If we know that a reaction is an elementary reaction, then we know its rate law.
B)The rate-determining step of a reaction is the rate of the fastest elementary step of its mechanism.
C)Since intermediate compounds can be formed, the chemical equations for the elementary reactions in a multistep mechanism do not always have to add to give the chemical equation of the overall process.
D)In a reaction mechanism, an intermediate is identical to an activated complex.
E)all of these statements are true.
Answer:
If we know that a reaction is an elementary reaction, then we know its rate law.
Explanation:
An elementary reaction is a reaction that takes place in one reactive encounter. This means that the two species interact in a single step to give the products.
If two reactants interact in a single step to yield the products then we can easily deduce the rate law from the reaction equation.
For instance, For the reaction;
2A + B → C
The rate law is
rate = k[A]²[B].
If the reaction is an elementary reaction and the equation of the reaction is balanced, then we can deduce the rate law from the balanced reaction equation.
Which of the following can be calculated from the mass of the reactants used in a chemical reaction? (Select all that apply)
Theoretical yield of products
Amount of limiting reactant used in a reaction
Actual yield of products
Amount of excess reactant from a reaction
Answer:
Can you explain it more please
Explanation:
To run a spectrophotometry experiment, begin by _________ the spectrophotometer and preparing the samples. Be sure to select the correct ________, then run a measurement on the _________ solution. Follow up by running measurements on _______solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.
Answer:
To run a spectrophotometry experiment, begin by warming up the spectrophotometer and preparing the samples. Be sure to select the correct wavelength, then run a measurement on the blank solution. Follow up by running measurements on sample solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.
Explanation:
The spectrophotometer is a device used in laboratories to carry out analysis in experiments that need to measure and compare the amount of light absorbed or transmitted between samples, regardless of whether the samples are transparent or opaque solid. The spectrophotometer can be single-beam and double-beam. Regardless of the nature of the beam, to perform a spectrophotometry experiment, you must start by heating the spectrophotometer and preparing the samples. Make sure to select the correct wavelength and perform a measurement on the blank solution. Follow up by performing measurements on sample solutions. Once the data is collected, turn off the instrument, clean the area and discard the samples.
Mass of hydrated copper sulfate in CuSo4.5H2O
Answer: Molar mass of [tex]CuSO_4.5H_2O[/tex] is 249.68 g/mol.
Explanation:
Molar mass is the mass of 1 mole of the molecule. It is calculated by adding masses of all the atoms in the given molecule.
[tex]CuSO_4.5H_2O[/tex] contains one atom of copper , 1 atom of sulphur, 9 atoms of oxygen and 10 atoms of hydrogen
Mass of copper = 63.5 g/mol
Mass of sulphur = 32.06 g/mol
mass of oxygen = 16.00 g/mol
Mass of hydrogen = 1.008 g/mol
Thus mass of [tex]CuSO_4.5H_2O[/tex] = 63.5(1)+32.06(1)+16.00(9)+1.008(10)=249.68 g
Molar mass of [tex]CuSO_4.5H_2O[/tex] is 249.68 g/mol.
Circuit A has a resistance of 7.5 ohms, and circuit B has a resistance of 5 ohms. Which statement about the circuits must be correct?
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is equal to the current in circuit B
If the current in circuit A is equal to the current in circuit B, then the voltage in circuit A is less than the
voltage in circuit B
If the current in circuit A is less than the current in circuit B, then the voltage in circuit A is less than the
voltage in circuit B
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the
current in circuit B
Answer:
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B
Explanation:
To know the the correct answer to the question, do the following:
Case 1: Let the circuit A and B have equal voltage say 24 V.
For Circuit A:
Voltage (V) = 24 V
Resistance (R) = 7.5 ohms
Current (I) =?
V = IR
24 = I × 7.5
Divide both side by 7.5
I = 24 / 7.5
I = 3.2 A
For Circuit B:
Voltage (V) = 24 V
Resistance (R) = 5 ohms
Current (I) =?
V = IR
24 = I × 5
Divide both side by 5
I = 24 / 5
I = 4.8 A
Thus for the same voltage, current in circuit A is less than the current in B.
Case 2: Let circuit A and B have equal current say 2 A
For circuit A:
Current (I) = 2 A
Resistance (R) = 7.5 ohms
Voltage (V) =?
V = IR
V = 2 × 7.5
V = 15 V
For Circuit B:
Current (I) = 2 A
Resistance (R) = 5 ohms
Voltage (V) =?
V = IR
V = 2 × 5
V = 10 V
Thus, for the same current, the voltage in circuit A is greater than the voltage in B
Case 3: Let circuit A have a current of 4 A and circuit B have a current of 5 A
For circuit A:
Current (I) = 4 A
Resistance (R) = 7.5 ohms
Voltage (V) =?
V = IR
V = 4 × 7.5
V = 30 V
For circuit B:
Current (I) = 5 A
Resistance (R) = 5 ohms
Voltage (V) =?
V = IR
V = 5 × 5
V = 25 V
Thus, when the current in circuit A is less than the current in circuit B, the voltage in circuit A is greater than the voltage in circuit B.
From the illustrations above and the options given in the question, the current answer is:
If the voltage of circuit A is equal to the voltage of circuit B, then the current in circuit A is less than the current in circuit B
HCl (aq) + H2O (l) ⇌ H3O^+ (aq) + Cl^- (aq)
In 1.0 M HCl (aq), is nearly 100 percent dissociated, as represented by the equation above. Which of the following best helps to explain why, in 0.01 M HCN (aq), less than 1 percent of HCN is dissociated?
A. Compared to the HCl (aq) solution, the concentration of the HCN (aq) solution is much too dilute to achieve 100 percent dissociation.
B. The CN^- ion is not very soluble in water, and a solid precipitate would form if more of the HCN dissociated..
C. The equilibrium constant for the dissociation of HCN (aq) is much smaller than that for the dissociation of HCl (aq).
D. HCN (aq) reacts with water to form a basic solution, and the high concentration of OH^- (aq) interferes with the dissociation process.
There is lesser dissociation of hydrogen cyanide as compared to HCl, as equilibrium constant for the dissociation of hydrogen cyanide has been smaller than HCl. Hence, option C is correct.
Hydrogen cyanide has been a weak acid that has been dissociated into the constituent ions. The dissociation of the compound in water has been corresponds to the equilibrium constant.
Equilibrium constant for hydrogen cyanide and HClThe equilibrium constant has been defined as the ratio of the concentration of solute and solvent ions at equilibrium.
The sample with lesser equilibrium constant tends to dissociate at lesser concentration as well.
The equilibrium constant for the dissociation of hydrogen cyanide has been smaller than HCl. Thus, there will be lesser dissociation of hydrogen cyanide as compared to HCl. Hence, option C is correct.
Learn more about equilibrium constant, here:
https://brainly.com/question/17960050
The vapor pressure of liquid pentane, C5H12, is 40.0 mm Hg at 244 K. A sample of C5H12 is placed in a closed, evacuated container of constant volume at a temperature of 409 K. It is found that all of the C5H12 is in the vapor phase and that the pressure is 62.0 mm Hg. If the temperature in the container is reduced to 244 K, which of the following statements are correct?
a. No condensation will occur.
b. The pressure in the container will be 100. mm Hg.
c. Only pentane vapor will be present.
d. Some of the vapor initially present will condense.
e. Liquid pentane will be present.
Answer:
b. The pressure in the container will be 100mm Hg.
d. Some of vapor initially present will condense.
Explanation:
The vapor pressure of liquid Pantene rises when there is container where evacuation of water molecules is restricted. The pressure inside the container rises to 100 mm Hg and then liquid molecules start condensing. These molecule form vapors.
Given 5.86 grams of NaN3, how many grams of Na are produced?
Answer:
what no entiendo nada jahag6
When 5.86 grams of NaN3, then 22.99 gram of Na are produced by using mole formula.
What is gram ?A thousandth of a kilo-gram in terms of mass in the metric system.
What is mole?A mole is a unit of measurement for atom amount. A mole of Iron atoms weighs heavier than just a mole of Carbon molecules because it is measured by the number of atoms present instead of by weight.
The reaction can be written as:
[tex]2 Na N_{3}[/tex] → 2Na + [tex]3N_{3}[/tex].
It can be seen that 2 mole of sodium azide give 3 mole of nitrogen molecule.
Calculate the moles of Na.
Moles of Na = 1 mol sodium azide × 2 mol of Na / 2 mol sodium azide = 1 mole of Na.
Calculate the mass of Na.
Mass of Na = 1 mol Na × 22.99 g Na / 1 mol Na = 22.99 gNa.
Therefore, the mass of Na will be 22.99 gram
To know more about mole.
https://brainly.com/question/26416088
#SPJ3
A food company produces raspberry coulis as a topping for its best-selling line, double strength chocolate mousse pie. Fresh raspberries comprising 5% seeds, 20% pulp solids, and 75% water are homogenised and placed in a stainless steel vat. Sugar is added to give a raspberry:sugar mass ratio of 3.5:1. The mixture is blended, strained to remove the seeds, then heated to reduce the water content to 35%. Half a tonne of coulis is produced every day.
Required:
a. What mass of raspberries is required per week?
b. How much sugar is required per week?
c. What is the sugar content of the coulis?
Answer:
5357.1429kg per week
2142.8571 kg per week
Explanation:
Given that :
Fresh Raspberries :
5% = seeds
20% = pulp solids
75% = water
Raspberry : Sugar = 3.5 : 1
Water content = 35%
Coulis produced per day = 0.5 tonnes
Mass of Raspberry produced per week :
Mass is measured in kg;
1 tonne = 1000kg
0.5 tonne = (1000/2) kg = 500kg
Mass of Coulis produced per week = 500kg * 7 = 3500kg
Coulis contains 35% water, Raspberry required 75% water :
(3500 / 35) * 75 = 7500kg
Raspberry : Sugar ratio = 3.5 : 1
Mass of Raspberry :
[7500 - (1 /3.5) * 7500]
7500 - 2142.8571
= 5357.1429kg per week
B.
Sugar required per week:
(1/3.5) * 7500kg
= 2142.8571 kg per week
C.)
Sugar content in coulis :
Which of the following sentences uses commas correctly?
-----------------------------------------------------------------------------------------------------------------------------
I got all of the answers on the test correct, didn't I?
I, got all of the answers on the test correct didn't I?
I got all of the answers, on the test correct didn't I?
I got all of the answers on the test, correct didn't I?
What might be one potential solution for eliminating the crown-of-thorns starfish from the Great Barrier Reef?
introducing a predator to eat the starfish
eliminating their food supply to starve them
introducing a different species that outcompetes them
hunting or culling by humans
Answer:
hunting or culling by humans
Explanation:
The hunting will decrease the starfish
When two substances combine to form a mixture, the properties of the substances change. True False
Answer:
Tell students that sometimes when two (or more) substances are mixed together, a change occurs and another substance (or substances) is created. This is called a chemical reaction. Gas may form, heat may be produced, and color may change. These types of changes indicate that a chemical reaction has occurred.
On another planet, the isotopes of titanium have the given natural abundances.
Isotope Abundance
Mass (u)
46Ti
70.600%
45.95263
48Ti
12.900%
47.94795
50Ti
16.500%
49.94479
What is the average atomic mass of titanium on that planet?
What is the correct name for Cr2O3?
A. Chromium trioxide
B. Chromium(III) oxide
C. Dichromium trioxide
D. Chromium(II) trioxide
A sample of polystyrene, which has a specific heat capacity of 1.880 J.g .°C , is put into a calorimeter (see sketch at right) that contains 300.0 g of water. The polystyrene sample starts off at 94.9 °C and the temperature of the water starts off at 22.0 When the temperature of the water stops changing it's 27.7 °C. The pressure remains constant at 1 atm. Calculate the mass of the polystyrene sample.
Answer:
56.6g
Explanation:
Given that :
Mass of water, m1= 300.0 g
Temperature of water, T1= 22°C
Specific heat capacity of water, C= 4.184 J/g°C
Mass of polystyrene, m2=?
Temperature of polystyrene = 94.9
Specific heat capacity of polystyrene, c2= 1.88 J/g°C
Final temperature = 27.7 oC
Heat lost by polystyrene = Heat gained by water
mc(dT) = mc(dT)
m2 * 1.88 * (94.9 - 27.7) = 300 * 4.184 * (27.7 - 22)
m2 * 1.88*67.2 = 300*4.184*5.7
126.336 * m2 = 7154.64
m2 = 7154.64 / 126.336
m2 = 56.631838
Hence, mass of polystyrene = 56.6g
As human populations grow, it becomes more important to use renewable sources of energy. Which of the following objects uses energy from a renewable source?
A-a stove that is powered by natural gas
B- a refrigerator that runs on solar power
C- a lantern that burns oil from beneath Earth's surface
D- a toaster that uses electricity from a coal-burning power plant
All of the following are physical changes except
A. ice melting.
B. plaster hardening.
C. paint drying.
D. rocket fuel burning.
Answer:
rocket fuel burning i think
20 Points!! Which of the following is a synthesis reaction? AgNO3+NaCI--> AgCI+NaNO3
CH4+O2->CO2+H2O SO3+H2O-> H2SO4 Cu+AgNO3 ->Ag+CuNO3
Question 5
2 pts
How many atoms of helium are found in a helium balloon if it has 3.9g of helium
inside?
The answer should be
x1023
Type the number that precedes the x1023
Answer: There are [tex]6.2\times 10^{23}[/tex] atoms of helium are found in a helium balloon if it has 3.9 g of helium inside.
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to the molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar Mass}}=\frac{3.9g}{4.00g/mol}=0.975moles[/tex]
1 mole of helium contains = [tex]6.023\times 10^{23}[/tex] atoms
Thus 0.975 moles of helium contain = [tex]\frac{6.023\times 10^{23}}{1}\times 0.975=6.2\times 10^{23}[/tex] atoms
Find the total mass in kilograms of a ring that contains a 5.0 x 10 -1 carat diamond and 7.00 grams of gold.
Answer:
49 вот правильный ответ
What kind of questions do scientists ask?
A. Ones that there are no right answers to
B. Ones that only deal with scientific issues
C. Ones that deal with matters of opinion
D. Ones that are answered through observing
ones that are answered through observing :)
Answer: D.
Explanation:
ones that are answered through observing.
How many moles are in 8.30 X 1023 molecules of H2O? with the step
Answer:
Answer: 1.38 moles
Explanation: According to Avogadro's law, 1 mole of every substance contains Avogadro number of particles (atoms, molecules or ions) i.e.6.023*10^23 particles.
Given : 1 mole molecule of water contains 6.023*10^23 molecules of water.
6.023*10^23 molecules are present in = 1 mole
8.30*10^23molecules will be present in =
1/6.023*10^23 ×8.30*10^23=1.38 moles
Thus molecules is equal to 1.38 moles.
PLEASE MARK ME BRAINLIEST
Dividend
Divisor
Quotient/ Remainder
SAGOT
75
21
16.) 54
17.) 108
18.) 380
19.) 633
20.) 648
27
76
57
32
Solo
nihanda ni:
NNA MARIE S. CARAIT
borrinoloticon
Answer:
Dividend Divisor Quotient/ Remainder SAGOT 75 21 16.) 54 17.) 108 18.) 380 19.) 633 20.) 648 27 76 57 32. Solo nihanda ni: NNA MARIE S.
Explanation:
nitrophenol is more acidic than phenol.
Answer:
The p- nitrophenol is more acidic than phenol because the deactivating nature of nitro group and after loosing the protons it makes more resonance stabilization as nitro group is having strong deactivating nature so it attracts electrons towards it.
Is a burning log an exothermic or endothermic event if the log is the (system) ?
Answer:
Exothermic Reaction
Explanation:
Burning wood in air is an exothermic process (it releases heat), but there is an energy barrier, so it requires a bit of heat in the beginning to get the reactions started.
Wood reacts with oxygen in the air to form (mostly) carbon dioxide and water vapor. The process involves many different individual chemical reactions, and it requires some energy to initiate the reactions. This is because it's usually necessary to break some chemical bonds (endothermic) before new stronger bonds can be formed (exothermic). Overall, though, more heat is released in forming the final products than is consumed in starting new reactions.
Have a great day <3
In the given question, a burning log is an exothermic event if the log is the system.
An exothermic reaction releases energy to the surroundings, usually in the form of heat. The change in enthalpy is negative.
When a log burns, it reacts with oxygen in the air to produce carbon dioxide, water vapor, and heat. This heat is released to the surroundings, making the burning log an exothermic event.
Therefore, a burning log is an exothermic event if the log is the system. This is due to the fact that the reaction emits heat into the environment, making it an exothermic reaction.
Learn more about exothermic reaction here:
https://brainly.com/question/28546817
#SPJ6
