lonic and Covalent compound formed through atomic bond formation. With the given
chemical formula, write the characteristic of the given properties.​

You weigh slightly more at the beach than on top of a mountain, because at the beach, you're closer to the center of the Earth.

Answer:

I think its B

Explanation:

Answer:

Breaking bones, injuring tendons, bruising

Explanation:

Answer:

Increase

Explanation:

The best way for me to visualize the relation between wavelength, frequency, and energy is to think about actual ocean waves. Wavelength is a measure of the distance between two equivalent points on consecutive waves (think wave peak to wave peak). Lets say you are building a sand castle and want to see how many waves hit your castle over a period of 10 seconds. If the distance between each wave is 10 ft and the wave is traveling at 1 foot per second then you will only have one wave hit your castle. If the wavelength is 1/2 that (5 ft) then you will have 2 waves hit your castle in the same amount of time. This is the same concept behind waves in physics. The smaller the distance between each wave, the more waves and therefore more energy that will be delivered.

Thank you for that information.  If we know her mass and kinetic energy, then we don't need any of that other business about the height of the slope, her skiing ability, the friction of the snow, what she uses to wax her skis, the color of her parka, or what she had for lunch at the chalet.  The mass and kinetic energy are enough to answer the question.

Kinetic Energy = (1/2) · (mass) · (speed)²

31,360 J = (1/2) · (80 kg) · (speed)²

speed² = (31,360 J) / (40 kg)

speed² = 784 m²/s²

speed = 28 m/s

Answer:

the watt is a unit of power

The symbol W denotes the work done and m is the mass and g is the acceleration due to gravity. If m is in Kg and g has a unit of m/s². Then the unit Kg m/s² is equal to one joule J. That is the unit of work done.

Work done in physics is the dot product of force and displacement. Work done of one joule is equal to the force of one newton, exerted by an object of mass m and acceleration a.

Thus we have F = Ma.

If the acceleration is replaced by acceleration due to gravity g, then force of one Newton is mg, that is the product of mass and acceleration. Force is an external agent act on a body to change its state from rest or motion.

If the force applied causes a displacement of the object, then a work is done on the body. Let the mass is taken in Kg and acceleration due to gravity is in m/s², then one newton  is  Kg m/s² is equal to one joule J. Hence, W has the unit of Kg m/s² or J.

To find more on work done, refer here:

https://brainly.com/question/3902440

#SPJ2

Answer:

4 m/s

Explanation:

multiply m ang s para makuha yung speed ng isng object ....

Answer:

false

Explanation:

Answer:

True

Explanation:

The answer is true do not listen to the other person they will get you wrong just look at the votes between mine and the other person's (hint like my answer and rate 5 stars so other people know what to pick)

Answer:

An object's acceleration depends on its mass and on the net force acting on it.

Explanation:

Newton's second law states that the acceleration of an object is directly related to the net force and inversely related to its mass. Acceleration of an object depends on two things, force and mass.

Answer:

3.An object's acceleration depends on its mass and on the net force acting on it.

Answer:

C. The distance traveled by an object at a certain velocity.

Explanation:

YW!

Answer:

third option is the most accurate

Answer:

Electrolytic manganese dioxide (EMD) is used in zinc-carbon batteries together with zinc chloride and ammonium chloride. EMD is commonly used in zinc manganese dioxide rechargeable alkaline (Zn RAM) cells also. For these applications, purity is extremely important.

Explanation:

hope this helps...

Answer:

The quadriceps consists of four muscles: the skinny rectus femoris and the three huge “vasti” — vastus lateralis/intermedius/medialis. The vasti are only elongated by knee flexion, which is limited to about 120˚ when the calf hits the hamstrings. The vasti cannot be stretched strongly.

Answer:Masseter and temporalis

Why it’s unstretchable: The jaw can only open so far.

Why it’s a dang shame: Jaw tension is epidemic, and trigger points in these muscles cause a wide array of strange face and head pains, including toothaches, headaches, and earaches.

Answer:

answer is d from my guess

Answer:

The answer is "[tex]\bold{0.36363 \ \frac{m}{s}}[/tex]"

Explanation:

Please find the attached file of the complete question:

Given:

[tex]m= 2.2 \ kg\\\\t= 40 \ ms[/tex]

Using formula:

[tex]\to F=ma[/tex]

       [tex]= 2.2 \ (a)\\\\= 2.2 \ \frac{dv}{dt}[/tex]

but  

[tex]\to F= f(t)\\\\[/tex]

[tex]\to 2.2 \ a= f(t)\\\\ \to 2.2 \ \frac{dv}{dt}=f(t)\\\\ \to \int^{v}_{0} \ dv =\int^{t= 40 ms}_{0} (\frac{f(t)}{2.2}) \ dt\\\\[/tex]

[tex]\to v= \frac{\text{(Area of given graph)}} {2.2} \\\\[/tex]

      [tex]=\frac{1}{2} \times \frac{1}{2.2} \times 40 \times 40 \times 10^{-3} \ s\\\\= \frac{1}{4.4} \times 40 \times 40 \times \frac{1}{1000} \ s\\\\= \frac{1}{4.4} \times 16 \times \frac{1}{10} \ s\\\\= \frac{16}{44} \ s\\\\= 0.36363 \ \frac{m}{s}[/tex]

Answer:

Acceleration is directly proportional to the net force

Explanation:

The net force acting on an object is given by :

F = ma

Where

m is mass

and

a is acceleration

It can be seen that the relation between the net force and the acceleration is direct i.e. as the acceleration increases, the net force will increase. Hence, the correct option is (d).

Answer:force required to lift the load = 500N

Explanation:

Mechanical advantage for a lever is given by the formulae

= force output/force input

or

Mechanical Advantage = Load / Effort

where

Force output  / Load= 800 N

mechanical advantage = 1.6

Force input / Effort =??

Force input=  Force output /Mechanical advantage

= 800N / 1.6

=500N

OR

Effort = Load/ Mechanical Advantage = 800/ 1.6 = 500N

Answer:

no

Explanation:

this is because its valency shell is full so it wont want any other electrons in its valence shell.

My day is alright! I just finished school for the day.. and I’m excited for the weekend! How was your day?

Answer:

B

Explanation:

Answer:

240 cm/sec

Explanation:

The speed line is closest to 240sec at 60cm.

Hope this helps! :)

Explanation:

(1) Given that,

A charge, [tex]q=3\times 10^{-7}\ C[/tex]

Electric field, E = 27 N/C

We need to find the force acting on the charge. The force on the charge is given by :

[tex]F=qE\\\\F=3\times 10^{-7}\times 27\\F=8.1\times 10^{-6}\ N[/tex]

So, the force acting on the charge is [tex]8.1\times 10^{-6}\ N[/tex]

(b) Charge, [tex]q=5\times 10^{-6}\ C[/tex]

Force, [tex]F=2\times 10^{-4}\ N[/tex]

Let E be the electric field.

[tex]E=\dfrac{F}{q}\\\\E=\dfrac{2\times 10^{-4}}{5\times 10^{-6}}\\\\E=40\ N/C[/tex]

So, the electric field is 40 N/C.

Answer:

Increase, same, same

Explanation:

Answer:

1

Explanation:

Impulse = change in momentum = force x change in time

50 x 0.02 = 1

If a baseball is hit by a bat with a force of 50N during a time interval of 0.02s. Then the impulse on the baseball is 1 N s.

An impulse is a quantity that measures the change in momentum of an object. It is defined as the product of force and time, and it is measured in units of Newton seconds (N s) or kilogram meters per second (kg m/s). The impulse experienced by an object is equal to the change in momentum that occurs when a force is applied to it for a specific period of time.

Impulse is practically applied in various areas of physics and engineering. Here are a few examples:

Sports: Impulse is a crucial factor in many sports, especially those that involve hitting or throwing objects. In sports like baseball, cricket, and golf, the force and time of impact determine the ball's momentum and trajectory.

Transportation: The impulse experienced by vehicles during a collision is used to determine the forces that act on the occupants. This information is used to design safety features such as airbags and crumple zones.

Engineering: In mechanical engineering, impulse is used to design machines that can produce large forces over short periods. For example, hydraulic presses use a large force over a short period to shape metal or other materials.

Physics: Impulse is a fundamental concept in physics, particularly in the study of collisions and the conservation of momentum. The impulse-momentum theorem is a fundamental law of mechanics that relates the change in momentum of an object to the impulse applied to it.

Here in the Question,

The impulse on the baseball can be calculated using the formula:

Impulse = Force x Time

Given that the force is 50 N and the time interval is 0.02 s, the impulse can be calculated as follows:

Impulse = 50 N x 0.02 s

Impulse = 1 N s

Therefore, the impulse on the baseball is 1 N s.

To learn more about kinetic energy click:

brainly.com/question/26472013

#SPJ3

Answer:

use earplugs

stay away from noisy areas

lower the volume

Answer:

Se realizan estudios en tres áreas: a) Procesos de transformación de la energía, b) Almacenamiento de la energía, c) Gestión inteligente entre consumo y generación.

Explanation:

Actualmente, se están realizando estudios en principalmente en tres áreas cruciales: a) Procesos de transformación de la energía, b) Almacenamiento de la energía, c) Gestión inteligente entre consumo y generación.

a) Se están desarrollando nuevos materiales que permiten mayor eficiencia entre la energía recibida y la energía eléctrica, además de una mayor durabilidad frente a las condiciones ambientales. Esto implica el mejoramiento del desempeño de las tecnologías basadas en las energías renovables y limpias, acortando su brecha con las energías no renovables.

b) Se están desarrollando nuevos materiales que garanticen una mayor densidad energética y mayor durabilidad, significando baterías más compactas, con mayor capacidad y más competitivas económicamente.

c) Se están desarrollando estrategias de control inteligente a tiempo que permite sincronizar el consumo y la generación, además de posibilitar el flujo bidireccional de la energía a través de una red inteligente (smart grid) e integrar mejor las fuentes renovables dentro de la matriz energética.

Answer:

Explanation:

Applying Fleming's right hand rule, the induced current would flow in a clockwise direction in the loop. Explanation: Current, magnetic field and motion are mutually dependent and perpendicular to one another.Aug 27, 2019

Answer:

1. c 2.d

Explanation:

we did this in middle school