Let f(x) = x² – 6x. Round all answers to 2 decimal places. = a. Find the slope of the secant line joining (2, f(2) and (7, f(7)). Slope of secant line = b. Find the slope of the secant line joining (6, f(6)) and (6 + h, f(6 + h)). Slope of secant line = c. Find the slope of the tangent line at (6, f(6)). Slope of the tangent line d. Find the equation of the tangent line at (6, f(6)). y =

Answer: 7x=30.5

Step-by-step explanation: If you were to answer this equation with the given information it would not be correct. 7(4.25)=29.75.  You need to go through BEDMAS to answer this.

You what you need to do is divide 30.5 by 7 to get the amount she needs to jog for a week, if you do that you get 4.37 miles each day to get to 30.5 in a week.

The volume of the box is 160 cubic inches. Using the volume of a rectangular prism formula the volume of the box is 160 cubic inches. Using another formula base area times height, the area is the same.

The volume of James' rectangular prism box can be calculated using both unit cubes and a formula. Part (a) involves counting the unit cubes in the model and multiplying the number of cubes by their volume, which is 1 cubic inch. In this case, there are 160 unit cubes, so the volume of the box is 160 cubic inches.

Part (b) involves using the formula for volume of a rectangular prism, which is length times width times height. Plugging in the given dimensions, we get 8 x 4 x 5 = 160 cubic inches, which is the same as the answer in part (a) using unit cubes.

Part (c) involves using a different formula for volume, which is base area times height. In this case, the base of the rectangular prism is a rectangle with length 8 inches and width 4 inches, so the base area is 8 x 4 = 32 square inches. Multiplying by the height of 5 inches, we get 160 cubic inches, which is again the same as the answers in parts (a) and (b).

Using the volume formulas is much quicker and more efficient than counting unit cubes, especially for larger boxes. However, counting unit cubes can provide a more concrete visual representation of the volume and can be helpful for students who are just learning about volume. In this case, the answers obtained using the formulas were the same as the answer obtained by counting unit cubes, which reinforces the accuracy of the formulas.

Know more about prism here:

https://brainly.com/question/29722724

#SPJ11

Answer:

4/6 or 2/3

Step-by-step explanation:

probability is successful out of total. The total is 1,2,3,4,5,6, or 6 ways, and the successful is 2,4,5,6, or 4 ways

Answer:

They can make 5 complete teams of 8 children even after one child goes home.

Step-by-step explanation:

If there are 43 children and they want to make teams of 8, we can find out how many complete teams they can make by dividing the total number of children by the number of children per team:

This means that they can make 5 complete teams of 8 children, with 3 children left over.

However, since one child goes home, there are only 42 children left. We can repeat the division:

This means that they can make 5 complete teams of 8 children, with 2 children left over. Therefore, they can make 5 complete teams of 8 children even after one child goes home.

Answer:

Yes

Step-by-step explanation:

9/25

√9/√25 = 3/5 = 0.6

so it is a rational number because it has an integer as a denominator also because the decimal is not reoccurring

Answer: Yes

Step-by-step explanation:

Yes.

9/25 = .36  

Because the decimal stop it is rational

Only decimals that have no pattern and go on infinitely then it is irrational like [tex]\pi[/tex]  or √7   if you plug those into a calculator they go on forever and have no pattern

Answer:

Step-by-step explanation

Domain :

x

>

4

, in interval notation :

(

4

,

∞

)

Range:

g

(

x

)

∈

R

, in interval notation :

(

−

∞

,

∞

)

Explanation:

g

(

x

)

=

ln

(

x

−

4

)

;

(

x

−

4

)

>

0

or

x

>

4

Domain :

x

>

4

, in interval notation :

(

4

,

∞

)

Range: Output may be any real number.

Range:

g

(

x

)

∈

R

, in interval notation :

(

−

∞

,

∞

)

graph{ln(x-4) [-20, 20, -10, 10]} [Ans]  x>4

Answer:

Step-by-step explanation:

The Domain of g(x) = -|x| is all real numbers (no restrictions on what values x can take).

The Range of g(x) = -|x| is all real numbers less than or equal to zero. Absolute value of any real number is always greater than or equal to zero, and multiplying by a negative sign, that flips the sign of the result. So, g(x) will always be less than or equal to zero.

Domain:  (-∞, ∞), {x|x ∈ R}

Range: (-∞, 0), {y ≤ 0}

By applying the Consecutive Angles Theorem, Jim can confirm that the angled section for the steps is indeed a parallelogram, even without accurately proving that any two sides are parallel.

Jim building a deck with an angled section in the shape of a parallelogram. To be assured that he has an actual parallelogram, Jim can use the Consecutive Angles Theorem.

This theorem states that if the consecutive angles of a quadrilateral are supplementary (add up to 180 degrees), then the quadrilateral is a parallelogram.

To use the Consecutive Angles Theorem, Jim should follow these steps:

1. Measure the four angles of the quadrilateral he has created for the angled section of the deck.
2. Check if the consecutive angles are supplementary (i.e., the sum of each pair of consecutive angles is equal to 180 degrees).
3. If all consecutive angles are supplementary, he can be assured that the quadrilateral is a parallelogram.

To learn more about Consecutive Angles Theorem go to:

https://brainly.com/question/30460355?source=quick-results&auto-scroll=true&q=Consecutive%20Angles%20Theorem

#SPJ11

The inequality to solve is 56 - x > 0. The solution is x < 56. Therefore, the domain of the function g(x) is x < 56. So, the answer is option B.

The function is defined as g(x) = log(56 - x).

The domain of a logarithmic function is all the values that make the argument of the logarithm positive. In other words, the argument of the logarithm (56 - x) must be greater than 0.

So, we solve the inequality 56 - x > 0 for x

56 - x > 0

Subtract 56 from both sides

-x > -56

Divide both sides by -1, and remember to reverse the inequality

x < 56

Therefore, the domain of the function g(x) is all real numbers x such that x < 56. So, the correct answer is B).

To know more about domain of function:

https://brainly.com/question/28599653

#SPJ4

--The given question is incomplete, the complete question is given

" The domain of g(x) = log 56 - x) can be found by solving the inequality

A. 56-x<0 ,B. 56-x>0,C. 56-x>=0, D. 56-x<=0 "--

The solution to the system of linear equations is (x, y) = (13, -4).

To solve the system of linear equations using Gaussian elimination, we need to eliminate one variable from one of the equations. Here, we can eliminate x from the second equation by subtracting twice the first equation from the second equation:

x + 2y = 5    (equation 1)

2x + 3y = 6    (equation 2)

--------------

  -2x - 4y = -10   (2 * equation 1)

        y = -4

Now, we can substitute the value of y into the first equation to solve for x:

x + 2(-4) = 5

x - 8 = 5

x = 13

Learn more about Gaussian

brainly.com/question/30509247

#SPJ11

Corresponding angles have the same position on the parallel lines, alternate interior angles are inside and opposite, alternate exterior angles are outside and opposite, and consecutive interior angles are on the same side.

When two parallel lines are intersected by a transversal, there are several types of angle pairs that are formed. Corresponding angles are pairs of angles that are located in the same position on the parallel lines relative to the transversal. They have the same measure and are congruent.

Alternate interior angles are pairs of angles that are located on opposite sides of the transversal and inside the parallel lines. They are congruent and have the same measure. Alternate exterior angles are pairs of angles that are located on opposite sides of the transversal and outside the parallel lines. They are congruent and have the same measure.

Consecutive interior angles are pairs of angles that are located on the same side of the transversal and inside the parallel lines. They add up to 180 degrees.

To classify each angle pair, we need to determine their positions relative to the parallel lines and the transversal. By knowing the classifications, we can identify each angle pair and their properties.

To know more about angles, refer to the link below:

https://brainly.com/question/30000579#

#SPJ11

Answer:

3 / (7-5)

Step-by-step explanation:

"Subtract 5 from 7"

When you're subtracting from something, the reverse the order of the numbers.  So, the expression here would be "7 - 5"

"Then, divide 3 by the result."

Here, you're dividing 3 by the result, so the 3 must be in the numerator (on top of the fraction), and the "result from the previous step must be in the denominator (on the bottom of the fraction).  So, the expression here would be "3 / result"

Since order of operations forces division to happen before subtraction, we'll need parentheses around the first result to force the subtraction to happen first, as instructed.

So, the final expression would be "3 / (7-5)"

The general solution to the differential equation is, |3x^4/(y(x+y))|x + |x^3| ln|y| + |x^3| ln|x+y| + h(x) = C.

The partial derivative of (3xy + y^2) with respect to y is 6xy + 2y, and the partial derivative of (x^2 + xy) with respect to x is 2x + y. Since these are not equal, the differential equation is not exact.

To make it exact, we need to find an integrating factor μ(x, y) such that μ(x, y)(3xy + y^2) dx + μ(x, y)(x^2 + xy) dy = 0 is exact. We can find μ(x, y) by using the formula:

μ(x, y) = e^(∫(∂M/∂y - ∂N/∂x)/N dx)

where M = 3xy + y^2 and N = x^2 + xy. We have:

(∂M/∂y - ∂N/∂x)/N = (6xy + 2y - 2x - y)/(x^2 + xy) = (6xy - x - y)/(x^2 + xy)

We can now find the integrating factor μ(x, y) by integrating this expression with respect to x:

μ(x, y) = e^(∫(6xy - x - y)/(x^2 + xy) dx) = e^(3ln|x| - ln|y| - ln|x+y| + C) = e^(ln|x^3/(y(x+y))| + C) = |x^3/(y(x+y))|e^C

where C is the constant of integration.

Now we multiply the original differential equation by the integrating factor μ(x, y) to obtain:

|3x^4/(y(x+y))| dx + |x^3/(y(x+y))| dy = 0

This is now an exact differential equation, and we can find its solution by integrating with respect to x or y. Integrating with respect to x, we get:

|3x^4/(y(x+y))|x + g(y) = C

where g(y) is the constant of integration. To find g(y), we integrate the coefficient of dy:

g(y) = ∫|x^3/(y(x+y))| dy = |x^3| ln|y| + |x^3| ln|x+y| + h(x)

where h(x) is another constant of integration. Substituting g(y) back into the solution, we have:

|3x^4/(y(x+y))|x + |x^3| ln|y| + |x^3| ln|x+y| + h(x) = C

This is the general solution to the differential equation.

To know more about differential equation, here

https://brainly.com/question/14620493

#SPJ4

The volume of the 4th doll is approximately [tex]130.1 cm^3.[/tex]

The diameter of the smallest doll is 1.9 cm, so its radius is 0.95 cm (half of the diameter).

Similarly, the radius of the second smallest doll is (2.85/2) = 1.425 cm.

Since the scale factor is the same from one doll to the next, the ratio of the radius of the second smallest doll to the radius of the smallest doll is:

1.425 cm / 0.95 cm = 1.5

Similarly, the ratio of the radius of the third smallest doll to the radius of the second smallest doll is also 1.5.

Using this pattern, we can find the radius of the 4th doll as:

Radius of 4th doll = 1.5 × (Radius of 3rd doll) = 1.5 × 2.1375 cm = 3.2063 cm (rounded to 4 decimal places)

The volume of the 4th doll can then be calculated as:

Volume of 4th doll = (4/3) × π ×[tex](Radius of 4th doll)^3[/tex]

                           = (4/3) × π × [tex](3.2063 cm)^3[/tex]

                           ≈ [tex]130.1 cm^3[/tex]

Therefore, the volume of the 4th doll is approximately [tex]130.1 cm^3.[/tex]

To know more about diameter refer here

https://brainly.com/question/5501950#

#SPJ11

We can conclude that Jack's claim is correct. QRST is indeed a parallelogram, since opposite angles in QRST are congruent, and opposite sides in a parallelogram are also congruent

To determine whether Jack's claim that QRST is a parallelogram is correct, we need to use the properties of parallelograms. One of the properties of a parallelogram is that opposite angles are congruent. Therefore, we need to check if the opposite angles in QRST are congruent.

If m∠R = 72 and m∠T = 108, then the sum of these angles is 180 degrees (72 + 108 = 180). This indicates that angles R and T are supplementary.

If m∠S = 72, then we need to find the measure of angle Q. Since QRST is a quadrilateral, the sum of its interior angles is 360 degrees.

m∠Q + m∠R + m∠S + m∠T = 360

Substituting the given values, we get:

m∠Q + 72 + 72 + 108 = 360

Simplifying the equation, we get:

m∠Q = 108

Therefore, angles Q and S are congruent (both measuring 72 degrees) and angles R and T are supplementary (measuring 72 and 108 degrees, respectively). Since opposite angles in QRST are congruent, and opposite sides in a parallelogram are also congruent, we can conclude that Jack's claim is correct. QRST is indeed a parallelogram.

More on parallelogram: https://brainly.com/question/11803780

#SPJ11

Optimize crate cost by expressing material cost in terms of x and y, calculating cost of all four sides, and finding minimum cost. Optimal dimensions: x = 16 ft, y = 48 ft. Minimum cost: $8704.

To find the dimensions of the crate that will minimize the total cost of material, we need to use optimization techniques, we need to express the cost of materials in terms of x and y then calculate the cost of all four sides, then find the minimum cost.
Let's start by defining the variables we need to work with:

Let x be the length of one side of the square base (in feet),  Let y be the height of the crate (in feet).
From the given volume, we know that:
V = x^2 * y = 12288 ft^3
We can use this equation to solve for one of the variables in terms of the other:
y = 12288 / (x^2)
Now we need to express the cost of materials in terms of x and y.
The area of the bottom is x^2, so the cost of the bottom is:
[tex]C_b = 10 * x^2[/tex]
The area of each side is x * y, and there are four sides, so the cost of the sides is:
[tex]C_s = 4 * 2 * x * y = 8xy[/tex]
The area of the top is also x^2, so the cost of the top is:
[tex]C_t = 2 * x^2[/tex]
The total cost of materials is the sum of these three costs:
[tex]C = C_b + C_s + C_t = 10x^2 + 8xy + 2x^2[/tex]
Now we can substitute y = 12288 / (x^2) into this equation:
[tex]C = 10x^2 + 8x * (12288 / x^2) + 2x^2[/tex]
Simplifying this expression, we get:
[tex]C = 12x^2 + 98304 / x[/tex]
To find the minimum cost, we need to find the value of x that minimizes this expression. We can do this by taking the derivative of C with respect to x and setting it equal to zero:
C' = 24x - 98304 / x^2 = 0
Solving for x, we get:
x = 16 ft
Now we can use this value of x to find y:
y = 12288 / (16^2) = 48 ft
Therefore, the dimensions of the crate that will minimize the total cost of material are:
- Length of one side of the square base = x = 16 ft
- Height of the crate = y = 48 ft
To check that this is indeed the minimum cost, we can plug these values back into the expression for C and calculate the cost:
C = 10 * 16^2 + 8 * 16 * 48 + 2 * 16^2 = 8704
Therefore, the minimum cost of material for the crate is $8704.

Learn More About Derivative: https://brainly.com/question/23819325

#SPJ11

The correct answer is: b

8 points within any 36-month period

6 points within any 24-month period

4 points within any 12-month period

In most US states, drivers are assigned points for certain traffic violations or accidents. If a driver accumulates too many points within a certain period of time, they may be labeled as a "negligent operator" and face penalties such as license suspension or revocation. The point thresholds for being labeled as a negligent operator may vary by state, but the options given in the question are generally accurate.

To know more about negligent operator refer here:

https://brainly.com/question/28192448#

#SPJ11

The area of a sector with a central angle of 45° and a diameter of 5.6 in. is 1.23 square inches.

To see why, you can use the formula for the area of a sector, which is:

A = (θ/360) x π x r^2

where θ is the central angle in degrees, r is the radius, and π is approximately 3.14.

First, you need to find the radius of the sector, which is half of the diameter:

r = d/2 = 5.6/2 = 2.8 in.

Next, you can plug in the values for θ and r into the formula:

A = (45/360) x 3.14 x 2.8^2 = 1.23 square inches

Therefore, the area of the sector is 1.23 square inches.

The area of a sector with a central angle of 120° and a radius of 18.4 m is 1908.57 square meters.

To see why, you can use the same formula for the area of a sector:

A = (θ/360) x π x r^2

First, you need to convert the radius from meters to centimeters, since π is in terms of centimeters:

r = 18.4 m x 100 cm/m = 1840 cm

Next, you can plug in the values for θ and r into the formula:

A = (120/360) x 3.14 x 1840^2 = 1908.57 square meters

Therefore, the area of the sector is 1908.57 square meters.

The maximum length of each prism is equal to 7.99 centimeter.

Maximum surface area = 275 square centimeter (cm²).

Given, Light fixtures of regular hexagonal prism .

Determine the maximum surface area of this regular hexagonal prism by using this mathematical expression:

Maximum surface area (quantity) = Cost/unit price

Maximum surface area (quantity) = $11/$0.04

Maximum surface area (quantity) = 275 square centimeter (cm²).

Mathematically, the surface area of a regular hexagonal prism can be calculated by using this formula:

[tex]A = 6al + 3\sqrt{3} a^2[/tex]

Where:

A represents the surface area of a regular hexagonal prism.

a represents the edge length (apothem) of a regular hexagonal prism.

l represents the length of a regular hexagonal prism.

Substituting the given parameters into the formula, we have;

[tex]275 = 6 \times 4l + (3\sqrt{3} \times 4^2)[/tex]

[tex]275 = 24l + 48\sqrt{3} \\24l = 275 - 48\sqrt{3}\\ 24l = 191.8616\\l = 191.8616/24[/tex]

Length, l = 7.99 centimeter.

Know more about hexagonal prism,

brainly.com/question/27216897

#SPJ12

L = ∫√(cos^2(3θ) + 9sin^2(3θ)) dθ.

This expression represents the arc length of the rose curve r = cos(3θ).

To understand how to set up an expression for the arc length of the rose curve r = cos(3θ), we first need to understand the concept of arc length in polar coordinates.

In Cartesian coordinates, the distance between two points can be calculated using the Pythagorean theorem. However, in polar coordinates, the distance between two points is given by the arc length formula, which involves integrating a function.

Consider a curve defined by the polar equation r = f(θ). To find the arc length of the curve between two angles θ1 and θ2, we divide the interval [θ1, θ2] into small pieces, and approximate the length of each piece as the hypotenuse of a right triangle.

The base of the triangle is a small change in θ, and the height is a small change in r. By taking the limit as the length of the intervals goes to zero, we can integrate to find the exact length of the curve.

The arc length formula for polar coordinates is given by:

L = ∫√(r^2 + (dr/dθ)^2) dθ.

This formula calculates the length of the curve r = f(θ) between θ1 and θ2. The expression inside the square root is the Pythagorean theorem for polar coordinates, and dr/dθ is the derivative of r with respect to θ.

Now, let's use this formula to find the arc length of the rose curve r = cos(3θ).

First, we need to find the derivative of r with respect to θ, which is given by:

dr/dθ = -3sin(3θ).

Now, we can plug in r and dr/dθ into the arc length formula:

L = ∫√((cos(3θ))^2 + (-3sin(3θ))^2) dθ.

Simplifying the expression inside the square root, we get:

L = ∫√(cos^2(3θ) + 9sin^2(3θ)) dθ.

This expression represents the arc length of the rose curve r = cos(3θ). By evaluating this integral between the appropriate limits of integration, we can find the exact length of the curve.

To learn more about cartesian coordinates, refer below:

https://brainly.com/question/15215968

#SPJ11

The equation of the axis of symmetry for the given function is x = 1.

To find the equation of the axis of symmetry for the function f(x) = -4x² + 8x - 28, we can use the formula:

x = -b / (2a)

where "a" and "b" are coefficients in the quadratic equation ax² + bx + c.

In this case, a = -4 and b = 8. Plugging these values into the formula, we get:

x = -8 / (2*(-4))

x = -8 / (-8)

x = 1.

The axis of symmetry for a quadratic function in the form of [tex]f(x) = ax^2 + bx + c[/tex]  can be found using the formula x = -b / (2a).

In the case of the given quadratic function f(x) = -4x² + 8x - 28, the coefficient of [tex]x^2[/tex] is a = -4 and the coefficient of x is b = 8.

For similar question on axis of symmetry.

https://brainly.com/question/24314434

#SPJ11

Using Pythagorean theorem, none of the triangles given are right triangles.

To determine which of the triangles are right triangles, you can use the Pythagorean theorem (a² + b² = c²), where a and b are the shorter side lengths and c is the longest side (hypotenuse).

Triangle 1:
Side lengths: 12, 19, 505
Checking: 12² + 19² = 144 + 361 = 505 ≠ 505²
Triangle 1 is not a right triangle.

Triangle 2:
Side lengths: 16, 19, 1467
Checking: 16² + 19² = 256 + 361 = 617 ≠ 1467²
Triangle 2 is not a right triangle.

Triangle 3:
Side lengths: 14, 20, 596
Checking: 14² + 20² = 196 + 400 = 596 ≠ 596²
Triangle 3 is not a right triangle.

Triangle 4:
Side lengths: 11, 23, 1421
Checking: 11² + 23² = 121 + 529 = 650 ≠ 1421²
Triangle 4 is not a right triangle.

None of the triangles given are right triangles.

More on right triangles: https://brainly.com/question/17003595

#SPJ11

Roy should cut the pizza at an angle of 4.7 radians if the total diameter of the pizza is 12 inches.

Diameter of the pizza = 12 inches

The area he can eat = 84. 8 inches

The area of the pizza for 12 inches diameter can be calculated by using the formula:

Area = π*[tex]r^2[/tex]

Area = π* ([tex]6^2[/tex])

Area = 36π

The angle of the slice of pizza he can eat about 84.8 square inches can be calculated as:

Area of sector = (θ/2) ×[tex]r^2[/tex]

84.8 = (θ/2) × [tex]6^2[/tex]

84.8 = 18*θ

θ = 84.8 / 18

θ = 4.71 radians

Therefore, we can conclude that Roy should cut the pizza at an angle of  4.7 radians.

To learn more about Radians

https://brainly.com/question/7721249

#SPJ4

a. Null hypothesis (H0): μ1 = μ2 and Alternative hypothesis (H1): μ1 < μ2. b. The test statistic is -2.57 and p-value is  0.005 for the hypothesis test. c. At α = 0.05 it can be concluded that CPAs in states with flat state income tax rates work fewer hours per week during tax season compared to the average U.S. CPAs.

a. First, let's formulate the hypotheses:

Null hypothesis (H0): μ1 = μ2, which means that the mean hours worked per week during tax season by CPAs in states with flat state income tax rates is equal to the mean hours worked per week by all U.S. CPAs during tax season.

Alternative hypothesis (H1): μ1 < μ2, which means that the mean hours worked per week during tax season by CPAs in states with flat state income tax rates is less than the mean hours worked per week by all U.S. CPAs during tax season.

b. Now, let's compute the test statistic and p-value using the given sample data:

Sample mean (x) = 55 hours

Population mean (μ) = 60 hours

Population standard deviation (σ) = 27.4 hours

Sample size (n) = 150

We'll use the z-test for this hypothesis test:

z = (x - μ) / (σ / √n) = (55 - 60) / (27.4 / √150) ≈ -2.57

To find the p-value, we need to look up the z-value in the standard normal table, which gives us a p-value of approximately 0.005.

c. Lastly, let's draw our conclusion using α = 0.05:

Since the p-value (0.005) is less than α (0.05), we reject the null hypothesis (H0). This suggests that CPAs in states with flat state income tax rates work fewer hours per week during tax season compared to the average U.S. CPAs.

Learn more about Hypotheses:

https://brainly.com/question/15980493

#SPJ11

To find the length of the opposite side and the adjacent side, we can use the ratios of the sides in a 30-60-90 degree triangle.

The ratio of the opposite side to the hypotenuse is 1:2, and the ratio of the adjacent side to the hypotenuse is √3:2.

Using these ratios, we can find the length of the opposite side and the adjacent side as follows:

Opposite side = 1/2 x hypotenuse = 1/2 x 10 = 5 units

Adjacent side = √3/2 x hypotenuse = √3/2 x 10 = 5√3 units

Given a right triangle with an acute angle of 60 degrees and an adjacent side of 5 units, find the length of the hypotenuse and the opposite side.

To find the length of the hypotenuse and the opposite side, we can use the ratios of the sides in a 30-60-90 degree triangle.

The ratio of the hypotenuse to the adjacent side is 2:1, and the ratio of the opposite side to the adjacent side is √3:1.

Using these ratios, we can find the length of the hypotenuse and the opposite side as follows:

Hypotenuse = 2 x adjacent side = 2 x 5 = 10 units

Opposite side = √3 x adjacent side = √3 x 5 = 5√3 units

Given a right triangle with an acute angle of 45 degrees and an opposite side of 7 units, find the length of the hypotenuse and the adjacent side.

To find the length of the hypotenuse and the adjacent side, we can use the ratios of the sides in a 45-45-90 degree triangle.

In this type of triangle, the opposite side and the adjacent side are equal, and the hypotenuse is √2 times the length of the legs.

Using these ratios, we can find the length of the hypotenuse and the adjacent side as follows:

Opposite side = Adjacent side = 7 units

Hypotenuse = √2 x opposite side = √2 x 7 = 7√2 units

Learn more about right triangle

brainly.com/question/6322314

#SPJ11

Answer:

Step-by-step explanation:

Since the two cylinders are similar, their corresponding dimensions (radius and height) are proportional. Let the radius of the smaller cylinder be r.

Then, we can write:

r / 6 = R / 30

where R is the radius of the larger cylinder.

Simplifying this equation, we get:

R = 5r

Now, we can use the formula for the volume of a cylinder to find the volume of the larger cylinder:

Volume of smaller cylinder = πr^2h = 90 cm^3

Volume of larger cylinder = πR^2H = π(5r)^2(30) = 750πr^2 cm^3

Substituting R = 5r, we get:

Volume of larger cylinder = 750πr^2 cm^3

Therefore, the volume of the larger cylinder is 750π times the volume of the smaller cylinder:

Volume of larger cylinder = 750π(90 cm^3) = 67,500π/ cm^3 (approx. 211,239.74 cm^3 rounded to five decimal places).

The maximum error of estimate is 4.75%.

To calculate the maximum error of estimate for the given problem, we will use the formula for margin of error:

Margin of Error = Z-score * (Standard Deviation / √n)

Where:
- Z-score corresponds to the 90% confidence level, which is 1.645
- Standard Deviation is 0.5 hours
- n is the sample size, which is 300 students

Margin of Error = 1.645 * (0.5 / √300) ≈ 0.0475

To express this as a percentage, multiply by 100:

0.0475 * 100 ≈ 4.75%

Thus, the maximum error of estimate with a 90% confidence level is 4.75%.

Learn more about margin of error here: https://brainly.com/question/29328438

#SPJ11

The median of the random variable X with pdf f(x) = 3x−4 for x ≥1 (and 0 is approximately 1.482.

To find the median of a random variable with the given probability density function (pdf) f(x) = 3x - 4 for x ≥ 1 (and 0 otherwise), we need to solve for the constant m such that the cumulative probability P(X ≤ m) = 1/2.

First, we find the cumulative distribution function (CDF) by integrating the pdf:

F(x) = ∫(3x - 4) dx, where the limits of integration are from 1 to x.

F(x) = [(3/2)x² - 4x] evaluated from 1 to x.

Now, set the CDF equal to 1/2 to find the median:

1/2 = [(3/2)m² - 4m] - [(3/2)(1)² - 4(1)]

1/2 = (3/2)m² - 4m - (1/2)

1 = 3m² - 8m

0 = 3m² - 8m - 1

To find the value of m, we solve the quadratic equation above. Unfortunately, it cannot be factored easily, so we use the quadratic formula:

m = (-b ± √(b² - 4ac)) / 2a

In this case, a = 3, b = -8, and c = -1. Plugging in these values:

m ≈ (8 ± √(64 + 12)) / 6 ≈ 1.482

Since the median must be greater than or equal to 1, we take the positive root of the equation: m ≈ 1.482. Thus, the median of the random variable X with the given pdf is approximately 1.482.

To know more about median, refer to the link below:

https://brainly.com/question/14059067#

#SPJ11

We can see here that an equation to show the total length of the bandages if they are placed end-to-end is:

([tex]1\frac{1}{4}[/tex] × [tex]2) + (1\frac{2}{4}[/tex] × 1) + ([tex]1\frac{3}{4}[/tex] × 3) + (2 × 4) + (3 × 6) = [tex]35\frac{1}{4}[/tex]

An equation in mathematics is a claim made regarding the equality of two expressions. Normally, it has two sides that are separated by an equal sign (=).

Variables, constants, and mathematical operations including addition, subtraction, multiplication, division, exponentiation, and more can be used on each side of the equation.

We can see here that the above answer is correct because on the number line:

[tex]1\frac{1}{4}[/tex] has 2 Xs on it.

[tex]1\frac{2}{4}[/tex] has 1 X on it.

[tex]1\frac{3}{4}[/tex] has 3 Xs on it.

2 has 4 Xs on it.

3 has 6 Xs on it.

And multiplying and adding the variables, we arrived at:  [tex]35\frac{1}{4}[/tex]

Learn more about equation on https://brainly.com/question/29174899

#SPJ1

The value of the variable is 9

It is important to note that  inequalities are described as non- equal comparison of numbers or expressions.

The signs of inequalities represents;

From the information given, we have that;

7x - 1  is less than or equal to 62

This is represented as;

7x - 1≤ 62

collect the like terms, we have;

7x ≤ 62 + 1

Add the values

7x ≤ 63

Divide both sides by the coefficient, we get;

x ≤ 63/7

x ≤ 9

Learn more about inequalities at: https://brainly.com/question/25275758

#SPJ1