Leland wants to paint a portrait for his parents using a photograph of them that is 5 inches wide by 8 inches high. He wants the portrait to be proportional to the photograph and 42 inches high. Which proportion can Leland use to find , the width he needs to use to make the portrait proportional?

The windshield sector area is 706.86 cm².

To calculate the sector area of the windshield wiper, we need to use the formula for the area of a sector of a circle. The formula is:

A = (θ/360°) x πr²

where A is the area of the sector, θ is the central angle of the sector in degrees, and r is the radius of the circle.

In this problem, we are given that the windshield wiper has a length of 45 cm, which means that the radius of the circle traced by the wiper is 45 cm/2 = 22.5 cm.

We are also given that the wiper creates a central angle of 120° in one wipe. Substituting these values into the formula, we get:

A = (120°/360°) x π(22.5 cm)²

A = (1/3) x π x (22.5 cm)²

A ≈ 706.86 cm²

Therefore, the sector area of the windshield wiper is approximately 706.86 square centimeters.

To learn more about sector area refer here:

https://brainly.com/question/16367606

#SPJ11

Answer:

60°

Step-by-step explanation:

A hexagon has 6 angles

The sum of the measures of the exterior angles of a hexagon is equal to 360°

So, measure of each exterior angle = 360∘ / 6 = 60∘

Based on the above, the proportion of the population who said yes is  78%.

To be able to calculate the population proportion who said yes,  you  have to divide the number of students who said "Yes" by the total amount or number of students in the  whole population:

Hence it will be:

Population proportion who said yes = 741/950

= 0.78

= 78%

So, the proportion of the population who said yes is 0.78 or 78%.

Learn more about Population  from

https://brainly.com/question/29885712

#SPJ1

See text below



At a high school with 950 total students, the true opinions of the entire student body on whether they approve of the student council president are shown below. Follow the directions below to determine a confidence interval for a sample of size 125.

Population Yes 741, Population No 209,  Population Size 950

Population proportion who said yes: ---

If the triangle given by the matrix [235-102] is scaled by a factor of 2, the side lengths of the triangle will be doubled. The angle measures of the triangle will remain the same since scaling does not affect the angles.

When a triangle is scaled by a factor of 2, the side lengths will be doubled, but the angle measures will remain the same. Here's a step-by-step explanation:

1. The original matrix is [2 3 5; -1 0 2].

2. Apply the scale factor of 2 to each of the side lengths by multiplying the matrix by 2: [4 6 10; -2 0 4].

3. The side lengths of the triangle have been doubled, but the angle measures remain the same.

So, after scaling the triangle by a factor of 2, the side lengths will be doubled while the angle measures will stay the same.

To know more about matrix refer here:

https://brainly.com/question/29132693

#SPJ11

The complete conditions are

By definition a quadrilateral is a shape that has four sides and four angles

Next, we test the conditions

Two pairs of parallel sides and at least two right angles

This is true because quadrilaterals like rectangles and squares have two pair of parallel sides and right angles

One pair of parallel sides and no right angles

This is also true because quadrilaterals like trapezoid have one pair of parallel sides and may or may not have right angle

One pair of parallel sides and three right angles

This is false because a quadrilateral cannot be drawn with this condition

No parallel sides and four right angles

This is false because a quadrilateral cannot be drawn with this condition

Read more about quadrilateral at

https://brainly.com/question/23935806

#SPJ1

If the point starts at the π/2 position, the equation for the blade of the wind turbine will be sin(θ + π/2) = sin(θ - π/2)cos(β) + cos(θ - π/2)sin(β).

The equation for the blade of the wind turbine is given by the expression sin(θ) = sin(θ - β)cos(α) + cos(θ - β)sin(α), where θ represents the angle of the blade, β represents the angle between the wind direction and the blade, and α represents the pitch angle of the blade.

If the point starts at the π/2 position, we need to substitute θ + π/2 for θ in the equation. This gives us sin(θ + π/2) = sin(θ - β + π/2)cos(α) + cos(θ - β + π/2)sin(α).

Using trigonometric identities, we can simplify this expression to sin(θ + π/2) = cos(θ - β)cos(α) - sin(θ - β)sin(α).

Finally, substituting β for (π/2 - β) in the above equation, we get sin(θ + π/2) = sin(θ - π/2)cos(β) + cos(θ - π/2)sin(β). This is the required equation for the blade of the wind turbine if the point starts at the π/2 position.

For more questions like Equation click the link below:

https://brainly.com/question/16663279

#SPJ11

The difference between the costs of a hovercraft and a boat in the year 2010 was approximately $1,558.

(a) The difference in costs between a hovercraft and a boat can be expressed as follows:

Cost difference = Hovercraft cost - Boat cost

Cost difference = (-1012 + 350t + 400) - (30 + 140t)

Cost difference = -1012 + 350t + 400 - 30 - 140t

Cost difference = 220t - 642

Therefore, the difference in costs between a hovercraft and a boat can be expressed as 220t - 642.

(b) To find the difference in the year 2010, we need to substitute t = 10 in the expression we derived in part (a):

Cost difference = 220t - 642

Cost difference = 220(10) - 642

Cost difference = 2200 - 642

Cost difference = 1558

Therefore, the difference between the costs of a hovercraft and a boat in the year 2010 was approximately $1,558.

To know more "Difference" refer here:

https://brainly.com/question/30241588#

#SPJ11

The two inequalities that best describe the plant heights in millimeters are: h > 32 and h < 52. This is because all the recorded heights fall within this range. The other options do not include all the recorded heights or include heights that are not recorded.

To find the best inequalities that describe the plant heights (h) in millimeters, we need to determine the minimum and maximum heights from the given list.

List of plant heights: 52, 46, 51, 32, 50

Minimum height: 32 mm
Maximum height: 52 mm

Now we can write the inequalities that best describe the plant heights:

h > 32 (heights are greater than 32 mm)
h < 52 (heights are less than 52 mm)

Your answer: h > 32, h < 52

Learn more about inequalities,

https://brainly.com/question/25944814

#SPJ11

Answer:

  area ≈ 9.219 square units

Step-by-step explanation:

You want the approximate area under the curve y = -1/2x² +x +5 on the interval [1.5, 4] using 5 trapezoids.

The interval can be divided into 5 intervals of width ...

  (4 -1.5)/5 = 2.5/5 = 0.5

The "bases" of each trapezoid will be the function values at the ends of the intervals, for example, at x=1.5 and x=2. The "height" of each trapezoid is the width of the sub-interval, 0.5.

The area formula for a trapezoid applies:

  A = 1/2(b1 +b2)h

  A = 1/2(f(x) +f(x +0.5))·0.5 . . . . . for x = 1.5, 2, 2.5, 3, 3.5

The sum of the areas is computed in the attachment as ...

  area under the curve = 9.21875

__

Additional comment

The value of the integral is 445/48 ≈ 9.2708333...

A. Main Answer:

The hypothesis that the variability in both populations is the same against the alternative that it is larger in the second population, we can perform a permutation test using two different test statistics:

(i) the difference of sample ranges and

(ii) the ratio of sample variances. By comparing the results of both test statistics, we can draw conclusions about the variability in the populations.

(i) Difference of Sample Ranges:

1. Calculate the sample range for each sample. The sample range is the difference between the maximum and minimum values in the sample.

  Sample 1 Range = Maximum value - Minimum value for Sample 1

  Sample 2 Range = Maximum value - Minimum value for Sample 2

2. Calculate the observed difference of sample ranges, which is the difference between the sample range of Sample 2 and Sample 1.

3. Pool the data from both samples and shuffle them randomly, keeping the same sample sizes.

4. Calculate the difference of sample ranges for the shuffled data.

5. Repeat steps 3 and 4 many times (e.g., 1000 permutations) to obtain a distribution of the difference of sample ranges under the null hypothesis (where variability is the same in both populations).

6. Compare the observed difference of sample ranges from step 2 with the distribution obtained from the permutations.

(ii) Ratio of Sample Variances:

1. Calculate the sample variance for each sample.

2. Calculate the observed ratio of sample variances, which is the ratio of the sample variance of Sample 2 to the sample variance of Sample 1.

3. Pool the data from both samples and shuffle them randomly, keeping the same sample sizes.

4. Calculate the ratio of sample variances for the shuffled data.

5. Repeat steps 3 and 4 many times (e.g., 1000 permutations) to obtain a distribution of the ratio of sample variances under the null hypothesis.

6. Compare the observed ratio of sample variances from step 2 with the distribution obtained from the permutations.

By comparing the results of both test statistics, we can assess whether the variability in the second population is significantly larger than the first population. If both test statistics consistently indicate larger variability in the second population, it provides evidence against the null hypothesis and suggests that the variability in the second population is indeed larger.

To know more permutation test , refer here :

https://brainly.com/question/21083287#

#SPJ11

The expression for the area of the rectangle inscribed in a circle of radius 9, in terms of n, is:

Area = n * √(81 - n^2)

To find an expression for the area of a rectangle inscribed in a circle of radius 9, we need to use the terms "rectangle" and "circle."

First, let's denote the length of the rectangle as "n" and the width as "w." Since the rectangle is inscribed in a circle with a radius of 9, its diagonal is equal to the diameter of the circle, which is 2 * 9 = 18.

Using the Pythagorean theorem for the right triangle formed by half of the diagonal, the length, and the width, we can write the equation:

(1/2 * 18)^2 = n^2 + w^2
81 = n^2 + w^2

Now, we need to express w in terms of n. To do this, we'll isolate w from the equation:

w^2 = 81 - n^2
w = √(81 - n^2)

The area of the rectangle can be calculated as the product of its length and width:

Area = n * w
Area = n * √(81 - n^2)

So, the expression for the area of the rectangle inscribed in a circle of radius 9, in terms of n, is:

Area = n * √(81 - n^2)

learn more about "Area":-https://brainly.com/question/25292087

#SPJ11

On performing an ANOVA test the p-value obtained is less than the chosen significance level, hence it is verified that the sample standard deviations use of ANOVA allow the the means to compare the population means. Since ANOVA test shows significant difference therefore, it suggests that these factors play a role in influencing the evaluation of the product.

To verify that the sample standard deviations use of ANOVA allows means to compare the population means, discuss the terms ANOVA, sample standard deviation, population means.

1. ANOVA (Analysis of Variance): ANOVA is a statistical method used to compare the means of multiple groups to determine if there's a significant difference between them.

2. Sample Standard Deviation: Sample standard deviation is a measure of how spread out the values in a sample are. It helps estimate the population standard deviation, which is necessary for calculating the F statistic in ANOVA.

a. Calculate the sample means and standard deviations for each group.
b. Perform an ANOVA test using calculated means and standard deviations.
c. Interpret results: If p-value obtained from the ANOVA test is less than the chosen significance level (e.g., 0.05), it means there is a significant difference between population means.

Regarding the effect of the subject's gender and attractiveness of the confederate on the evaluation of the product, if the ANOVA test shows a significant difference, it suggests that these factors play a role in influencing the evaluation of product. You can further analyze the data by performing post-hoc tests to identify which specific groups differ significantly.

Know more about ANOVA here:

https://brainly.com/question/15084465

#SPJ11

The point (0, -1) is a saddle point of f(x, y).
To determine the nature of the critical point (0, -1) for the function f(x, y) = x^3 + y^3 - 6x^2 - 3y - 5, we need to use the second partial derivative test. First, we compute the second partial derivatives:

f_xx = 6x - 12
f_yy = 6y
f_xy = f_yx = 0

Now, evaluate these at the critical point (0, -1):

f_xx(0, -1) = -12
f_yy(0, -1) = -6
f_xy(0, -1) = 0

Calculate the determinant D = f_xx * f_yy - f_xy^2:

D = (-12) * (-6) - 0^2 = 72

Since D > 0 and f_xx < 0 at the critical point, we can conclude that (0, -1) is a local maximum of f(x, y).

To know more about second partial derivatives click here:

brainly.com/question/11615354

#SPJ11

Answer: A

Step-by-step explanation:

It's A because our function of f is multiplied by 3.

Since our y intercept is 1, and we are multiplying the function f by 3,

our new y intercept is 3, meaning it is A.

Another way to check this is by using the other two points on your graph.

Please give brainliest + have a good afternoon.

Answer:

Step-by-step explanation:

Your original function has points at

0, 1

1, 2

2,4  

if you stretched it by 3, multiply your y by 3

new function:

0, 3

1, 6

2, 12

Tim and Bella working together can paint the room in 2.4 hours.

We can use the formula:

1/Total Work = 1/Time1 + 1/Time2

where Total Work is the work to be done (in this case, painting the room), Time1 is the time taken by Tim to complete the work, and Time2 is the time taken by Bella to complete the work.

Let x be the time taken by Tim and Bella working together to complete the work. Then we can write:

1/1x = 1/6 + 1/4

Simplifying this equation, we get:

1/1x = 5/12

Multiplying both sides by x, we get:

x = 12/5 = 2.4 hours.

Therefore, Tim and Bella working together can paint the room in 2.4 hours.

For more questions like Work click the link below:

https://brainly.com/question/29673978

#SPJ11

The first four nonzero terms for cos(20x²) are:
1
The first four nonzero terms for ln(1 - 4y) are:
-4y + 8y² - 32y³ +...

To find the first four nonzero terms of the Taylor series for the function cos(20x²) about 0,

we need to find the first few derivatives of the function, and evaluate them at x = 0.

f(x) = cos(20x²)
f'(x) = -40x * sin(20x²)
f''(x) = -40(40x² * cos(20x²) + 20sin(20x²))
f'''(x) = 40(1600x³ * sin(20x²) + 120x * cos(20x²))

Now, evaluate these at x = 0:
f(0) = cos(0) = 1
f'(0) = 0 (since sin(0) = 0
f''(0) = -40(0) = 0
f'''(0) = 0 (since cos(0) = 1

The first four nonzero terms for cos(20x²) are:
1

Now, let's find the first four nonzero terms of the Taylor series for the function f(y) = ln(1 - 4y) about 0.

f(y) = ln(1 - 4y)
f'(y) = -4 / (1 - 4y)
f''(y) = 16 / (1 - 4y)²
f'''(y) = -96 / (1 - 4y)³

Evaluate these at y = 0:
f(0) = ln(1) = 0
f'(0) = -4 / (1) = -4
f''(0) = 16 / (1)² = 16
f'''(0) = -96 / (1)³ = -96

The first four nonzero terms for ln(1 - 4y) are:
-4y + 8y² - 32y³ +...

To know more about Taylor series:

https://brainly.com/question/28158012

#SPJ11

Answer: Let's denote the number of cubic centimeters of the 20% salt solution as x and the number of cubic centimeters of the 60% salt solution as y.

We know that the total volume of the mixture is 100 cubic centimeters, so we have:

x + y = 100

We also know that the final solution should be a 30% salt solution. This means that the amount of salt in the final solution should be 0.3 times the total volume of the solution:

0.3(100) = 0.20x + 0.60y

where 0.20x represents the amount of salt in the 20% salt solution and 0.60y represents the amount of salt in the 60% salt solution.

We now have two equations with two unknowns:

x + y = 100

0.20x + 0.60y = 30

We can solve for x and y by using any method of linear equations, such as substitution or elimination.

Here, we will use substitution. Solving the first equation for x, we get:

x = 100 - y

Substituting this expression for x in the second equation, we get:

0.20(100 - y) + 0.60y = 30

Simplifying and solving for y, we get:

20 - 0.20y + 0.60y = 30

0.40y = 10

y = 25

So, we need 25 cubic centimeters of the 60% salt solution.

To find the amount of the 20% salt solution, we can substitute this value of y back into either equation:

x + y = 100

x + 25 = 100

x = 75

So, we need 75 cubic centimeters of the 20% salt solution.

Therefore, we need to mix 75 cubic centimeters of the 20% salt solution and 25 cubic centimeters of the 60% salt solution to obtain 100 cubic centimeters of a 30% salt solution.

The work required to pump the liquid out of the bucket is approximately 2.482 x 10⁷ Joules.

To create a bucket by rotating around the y-axis, we will use the formula for volume of revolution:

V = π ∫[a,b] (f(y))² dy where f(y) is the function being rotated, and a and b are the limits of integration.

In this case, the limits of integration are y = 0 and y = 3, and the function being rotated is y = 4 ln(x - 4), or x = e⁽y/⁴⁾ + 4.

So, we have:

V = π ∫[0,3] ((e⁽y/⁴⁾ + 4))² dy

V = π ∫[0,3] (e⁽y/²⁾ + 8e⁽y/⁴⁾+ 16) dy

V = π (2e⁽³/²⁾ + 32e⁽³/⁴⁾ + 48)

Now, to find the work required to pump the liquid out of the bucket, we need to use the formula:

W = ∫[h1,h2] ρgV(y) dy

where h1 is the height of the liquid (2 meters in this case), h2 is the height of the top edge of the bucket, ρ is the density of the liquid (860 kg/m^3), g is the acceleration due to gravity (9.8 m/s²), and V(y) is the volume of the liquid at height y.

To find V(y), we need to first find the radius of the bucket at height y.

The radius is given by: r(y) = e⁽y/⁴⁾+ 4

So, the volume of the liquid at height y is:

V(y) = π(r(y))² (h2 - y)

Plugging in the values, we have:

W = ∫[0,2] 860×9.8×π((e⁽y/⁴ + 4)²)×(2-y) dy

W = 2.482 x 10⁷J

Learn more about work required at

https://brainly.com/question/28240508

#SPJ11

The current scores of both Jenna and Kera in the game they were playing are

Jenny's current score is -15.

Kera's current score is 8.

In the given problem, we are given two players, Jenny and Kera, playing the game.

Jenny has -10 points, which means she already has negative points. He has since lost 5 more points. So his current score would be:

-10 - 5 = -15

So now Jenny has a score of -15.

Kera, meanwhile, has 22 points and 14 points to lose. So his current score would be:

22 - 14 = 8

So now Kera has 8 points.

Learn more about equations for playing games at

https://brainly.com/question/29617368

#SPJ4

The possible rectangles that Wes can make with his 20 feet of fencing are:

L = 3, W = 7

L = 4, W = 6

L = 5, W = 5

L = 6, W = 4

L = 7, W = 3

Let L be the length of the rectangular garden and W be the width of the garden. Since the garden is enclosed by four sides, Wes will need 2L+2W feet of fencing to enclose it. We know that he has 20 feet of fencing, so we have the equation:

2L + 2W = 20

We also know that the smallest side of the garden should be 3 feet or longer, so:

L >= 3

W >= 3

To find the possible rectangles Wes can make, we can solve the equation for one variable in terms of the other:

2L + 2W = 20

2L = 20 - 2W

L = 10 - W

Now we can substitute this expression for L into the inequality L >= 3 to get:

10 - W >= 3

W <= 7

Similarly, we can substitute L = 10 - W into the inequality W >= 3 to get:

10 - L >= 3

L <= 7

Therefore, the possible values for L and W are:

3 <= L <= 7

3 <= W <= 7

We can also use the equation 2L + 2W = 20 to find the combinations of L and W that add up to 10, since the total length of fencing is 20 feet:

L = 3, W = 7

L = 4, W = 6

L = 5, W = 5

L = 6, W = 4

L = 7, W = 3

These are the possible rectangles that Wes can make with his 20 feet of fencing, where the smallest side is 3 feet or longer.

To know more about Rectangle visit;

brainly.com/question/29068457

#SPJ1

To apply the Integral Test, we need to find a function f(x) that is continuous, positive, and decreasing such that f(x) = 1/(5√x).

Taking the integral of f(x) from 1 to infinity, we get:

∫1 to infinity (1/(5√x)) dx = 2/5

Since this integral is a finite number, the series is convergent by the Integral Test.
To determine whether the series is convergent or divergent, we will apply the Integral Test as requested. The given series is:

Σ (from n=1 to infinity) of (1 / (5√n))

First, let's consider the function f(x) = 1 / (5√x). This function is positive, continuous, and decreasing for x ≥ 1, which are the necessary conditions for applying the Integral Test.

Now, we evaluate the improper integral:

∫ (from x=1 to infinity) of (1 / (5√x)) dx

To solve this integral, we'll first rewrite the integrand:

1 / (5√x) = 1 / (5x^(1/3))

Now integrate:

∫(1 / (5x^(1/3))) dx = (3/2) * (1/5) * x^(2/3) + C = (3/10) * x^(2/3) + C

Evaluate the improper integral:

lim (t -> infinity) [∫(from x=1 to t) of ((3/10) * x^(2/3)) dx]

= lim (t -> infinity) [(3/10) * (t^(2/3) - 1)]

Since the exponent (2/3) is less than 1, the limit converges to a finite value:

lim (t -> infinity) [(3/10) * (t^(2/3) - 1)] = -(3/10)

Since the improper integral converges, by the Integral Test, the given series is convergent as well.

To learn more about integral visit;

brainly.com/question/18125359

#SPJ11

To find Jackson's gross monthly income for 40 hours per week, follow these steps:

1. Calculate his weekly income: Multiply his hourly wage ($18.50) by the number of hours he works each week (40 hours).
2. Calculate his monthly income: Multiply his weekly income by the number of weeks in a month (4 weeks).

A. Gross Annual Income: To find this, multiply his monthly income by 12 (the number of months in a year).
B. Gross Monthly Income: This is the answer we need to find.

Step-by-step calculations:
1. Weekly income = $18.50 * 40 hours = $740
2. Monthly income = $740 * 4 weeks = $2,960

A. Gross Annual Income: $2,960 * 12 = $35,520
B. Gross Monthly Income: $2,960

The answer:
A. Gross Annual Income: $35,520
B. Gross Monthly Income: $2,960

Learn more about gross monthly income at https://brainly.com/question/17163107

#SPJ11

The answer is option C) A total of 25.2 percent passed both tests. The events are not independent.

To solve this problem, we can use a Venn diagram. Let P(A) be the probability of passing the first test, P(B) be the probability of passing the second test, and P(A and B) be the probability of passing both tests.

From the problem, we know:

P(A) = 0.42

P(B) = 0.50

P(B | A) = 0.60 (the probability of passing the second test given that the student passed the first test)

We can use the formula P(B | A) = P(A and B) / P(A) to find P(A and B):

0.60 = P(A and B) / 0.42

P(A and B) = 0.60 x 0.42

P(A and B) = 0.252

Therefore, 25.2% of the class passed both tests.

To determine if the events are independent, we can compare P(B) to P(B | A). If they are equal, the events are independent. If they are not equal, the events are dependent.

P(B) = 0.50

P(B | A) = 0.60

Since P(B) is not equal to P(B | A), the events are dependent.

Therefore, the answer is option C) A total of 25.2 percent passed both tests. The events are not independent.

To know more about probability refer here:

https://brainly.com/question/11234923

#SPJ11

Answer:

  u = -2.34  or  u = 18.34

Step-by-step explanation:

You want to solve u² -16u = 43 by completing the square.

To complete the square, add the square of half the coefficient of the linear term to both sides.

  u² -16u +(-16/2)² = 43 +(-16/2)²

  u² -16u +64 = 107 . . . . . . . simplify

  (u -8)² = 107 . . . . . . . . . write as a square

  u -8 = ±√107 . . . . . . square root

  u = 8 ± √107  . . . add 8

  u = -2.34  or  u = 18.34 . . . . . find the decimal values

<95141404393>

The probability of randomly selecting an orange hat is 1/12 or 0.0833.

In the sample, there are total of 4 pieces of clothing and 3 colors.

The possible outcomes is:

= 4 x 3

= 12

So, the outcomes when randomly selecting a piece of clothing and a color is 12.

From 12 possible outcomes, there is only one outcome where you end up with an orange hat.

So, the probability of randomly selecting an orange hat is:

= 1/12

= 0.0833.

Correct question "You're at a clothing store that dyes your clothes while you wait. You get to pick from 4 pieces of clothing (shirt, pants, socks, or hat) and 3 colors (purple, blue, or orange). If you randomly pick the piece of clothing and the color, what is the probability that you'll end up with an orange hat?"

Read more about probability

brainly.com/question/23044118

#SPJ1

Answer:

pls mrk me brainliest (⁠´⁠(⁠ｪ⁠)⁠｀⁠）

The volume of one smaller box is 1 cubic foot.

The volume of one smaller box is calculated by raising the length of its sides to the power of 3, so the volume of one smaller box is:

Volume (smaller box) = (1 foot)³ = 1 cubic foot

The number of smaller boxes that fit into a shipping container is obtained by multiplying the number of boxes that fit along each dimension, so the number of smaller boxes that fit into a shipping container is:

Number of smaller boxes = 20 boxes (width) × 40 boxes (length) × 20 boxes (height) = 16,000 boxes

To calculate the volume of the large shipping container, we need to multiply the length, width, and height of the container. Since each dimension is given in terms of the number of boxes it can hold, we need to multiply each dimension by the length of one smaller box (1 foot) to obtain the dimensions in feet. Therefore, the volume of the large shipping container is:

Volume of the large shipping container = 20 boxes (width) × 1 foot (length of one smaller box) × 40 boxes (length) × 1 foot (length of one smaller box) × 20 boxes (height) × 1 foot (length of one smaller box) = 16,000 cubic feet

Learn more about volume here:

https://brainly.com/question/463363

#SPJ1

The total area of the wrapping paper is 72.5 in².

In the given figure (attached below), we have two shapes one is a triangle and the other one is a rectangle. To find the total area of the wrapping paper we have to add the area of the rectangle part and the area of the trianglular part.

Total area = Area of the rectangular part + area of the triangular part.

Area of the rectangular part = length x breadth

from the below figure, length = 15 in

                                     breadth = 4 in

So, area of the rectangular part = 15 in x 4 in = 60 in²

Similarly, area of the triangular part = 1/2 x base x height

from the below figure, base of the triangle = 15 in -10 in = 5 in

                                      height of the triangle = 9 in - 4 in = 5 in

So, area of the triangular part = 1/2 x 5 in x 5in =  12.5 in²

Now, the total area of the wrapping paper = area of the rectangular part + area of the triangular part = 60 in² + 12.5 in² = 72.5 in².

To know more about the area,

https://brainly.com/question/19819849

#SPJ1