Lab scale tests performed on a cell broth with a viscosity of 5cP gave a specific cake resistance of 1 x1011 cm/g and a negligible medium resistance. The cake solids (dry basis) per volume of filtrate was 20 g/liter. It is desired to operate a larger rotary vacuum filter (diameter 8 m and length 12 m) at a vacuum pressure of 80 kPA with a cake formation time of 20 s and a cycle time of 60 s. Determine the filtration rate in volumes/hr expected for the rotary vacuum filter.

Answer:

shrinkae limit = 20.35%

shrinkage ratio = 1.45

Explanation:

1. to get the shrinkage limit we would first calculate the moisture content w.

w = (37-28)/28

= 9/28

= 0.3214

then the formula for shrinkage limit is

[tex][w-\frac{(V-Vd}{wd} ]*100[/tex]

w = 0.3214

V = 19.3

Vd = 16

Wd = 28

when we put these values into the formula:

[tex][0.3214-\frac{(19.3-16)}{28} ]*100\\[/tex]

= 20.35%

2. the shrinkage limit = Wd/V

= 28/19.3

= 1.45

Answer:

A PULLY

Explanation:

HAD THIS ONE THAT IS THE CORRECT ANWSER

Answer:

The answer is B. a pulley

Explanation:

I hope I answered your question:)

Answer:

u need to plan it out

Explanation:

u need to plan it out

Answer:

use the turn 1 degrees option and put a repeat loop on it

Explanation:

u can add sound in ur loop

Answer:

The correct option is - A categorical syllogism argues that A and B are both members of C whereas a conditional syllogism argues that if A is true then B is also true.

Explanation:

As,

Categorical syllogisms follow an "If A is part of C, then B is part of C" logic.

Conditional syllogisms follow an "If A is true, then B is true" pattern of logic.

So,

The correct option is - A categorical syllogism argues that A and B are both members of C whereas a conditional syllogism argues that if A is true then B is also true.

Answer:

answer is option (d) all of the above

Solution :

Finding the cohesion of the soil(c) using the relation:

[tex]$c = \frac{q_u}{2}$[/tex]

Here, [tex]$q_u$[/tex] is the unconfined compression strength of the soil;

[tex]$c = \frac{800}{2}$[/tex]

   = 400 psf

∴ The cohesion value is greater than 0

So the use of the angle of internal friction is 0

Referring to the table relation between bearing capacity factors and angle of internal friction.

For the angle of inter friction [tex]$0^\circ$[/tex]

    [tex]$N_c = 5.14$[/tex]

   [tex]$N_q = 1.0$[/tex]

   [tex]$N_r = 0$[/tex]

Therefore,

[tex]$q_{ult} = (400 \times 5.14 )+(110 \times 3 \times 1.0)+(0.5 \times 100 \times 13 \times 0)$[/tex]

     =  2386 psf

∴ Allowable bearing capacity [tex]$q_{a} = \frac{Q_{allow}}{A}$[/tex]

                                                     [tex]$=\frac{30}{B^2}$[/tex]

∴ [tex]$q_a = \frac{q_{ult}}{F.O.S}$[/tex]

  [tex]$\frac{30}{B^2} = \frac{2386}{3}$[/tex]

∴ B = 0.2 ft

Therefore, the dimension of the square footing is 0.2 ft x 0.2 ft

                                                                                 [tex]$=0.04 \ ft^2$[/tex]

Answer:

<:

Explanation:

Answer:

d

Explanation:

Answer:

AC

Explanation:

One situation when alternating current would work better than direct current is if the operator is encountering magnetic arc blow.

Current works best when the operator  encounters magnetic arc blow is AC

Magnetic arc blow is simply defined as the arc deflection due to the warping of the magnetic field that is produced by electric arc current.

This is caused as a result of the following;

- if the material being welded has residual magnetism at an intolerable level

- When the weld root is being made, and the welding current is direct current which indicates constant direction and maintains constant polarity (either positive or negative).

Thus, Current works best when the operator  encounters magnetic arc blow is AC

Read more at; brainly.in/question/38789815?tbs_match=1

Answer:

20368.917N

Explanation:

Frictional force (F) is the product of the Coefficient of friction and the normal reaction.

F = μN

Coefficient of friction, μ = 0.2

Normal reaction = MgCosθ

Mass, m = 12 tonnes = 12 * 1000 = 12000 kg

N = 12000 * 9.8 * cos30

N = 101844.58

F = 0.2 * 101844.58

F = 20368.917N

Answer:

The answer is "583.042533 MPa".

Explanation:

Solve the following for the real state strain 1:

[tex]\varepsilon_{T}=\In \frac{I_{il}}{I_{01}}[/tex]

Solve the following for the real stress and pressure for the stable.[tex]\sigma_{r1}=K(\varepsilon_{r1})^{n}[/tex]

[tex]K=\frac{\sigma_{r1}}{[\In \frac{I_{il}}{I_{01}}]^n}[/tex]

Solve the following for the true state stress and stress2.

[tex]\sigma_{r2}=K(\varepsilon_{r2})^n[/tex]

     [tex]=\frac{\sigma_{r1}}{[\In \frac{I_{il}}{I_{01}}]^n} \times [\In \frac{I_{i2}}{I_{02}}]^n\\\\=\frac{399 \ MPa}{[In \frac{54.4}{47.7}]^{0.2}} \times [In \frac{57.8}{47.7}]^{0.2}\\\\ =\frac{399 \ MPa}{[ In (1.14046122)]^{0.2}} \times [In (1.21174004)]^{0.2}\\\\ =\frac{399 \ MPa}{[ In (1.02663509)]} \times [In 1.03915873]\\\\=\frac{399 \ MPa}{0.0114161042} \times 0.0166818905\\\\= 399 \ MPa \times 1.46125948\\\\=583.042533\ \ MPa[/tex]

Answer:

this is your answer. if mistake don't mind.

Answer:

a.

y[n] = x[n] x[n-1]  x[n+1]

(i) Memory-less - It is not memory-less because the given system is depend on past or future values.

(ii) Causal - It is non-casual because the present value of output depend on the future value of input.

(iii) Invertible - It is invertible and the inverse of the given system is [tex]\frac{1}{x[n] . x[n-1] x[n+1]}[/tex]

(iv) Stable - It is stable because for all the bounded input, output is bounded.

(v) Time invariant - It is not time invariant because the system is multiplying with a time varying function.

b.

y[n] = cos(x[n])

(i) Memory-less - It is memory-less because the given system is not depend on past or future values.

(ii) Causal - It is casual because the present value of output does not depend on the future value of input.

(iii) Invertible - It is not invertible because two or more than two input values can generate same output values .

For example - for x[n] = 0 , y[n] = cos(0) = 1

                       for x[n] = 2[tex]\pi[/tex] , y[n] = cos(2[tex]\pi[/tex]) = 1

(iv) Stable - It is stable because for all the bounded input, output is bounded.

(v) Time invariant - It is time invariant because the system is not multiplying with a time varying function.

To solve this problem, we can use the ideal gas law and the equation for polytropic process.

The ideal gas law is a fundamental law of physics that describes the behavior of an ideal gas. It relates the pressure, volume, temperature, and number of particles of a gas using the following equation:

PV = nRT

a) First, we need to find the mass of the carbon dioxide in the tank. The ideal gas law is:

PV = mRT

where P is the pressure, V is the volume, m is the mass, R is the universal gas constant, and T is the temperature. Rearranging for the mass, we get:

m = PV / RT

Substituting the given values, we have:

m = (200 kPa)(0.3 m3) / [(0.287 kPam3/kgK)(27°C + 273.15)] = 3.87 kg

So the mass of the carbon dioxide in the tank is 3.87 kg.

b) To determine the work done by the gas during the process, we can use the equation for polytropic process:

P1V1^n = P2V2^n

where P1 and V1 are the initial pressure and volume, P2 and V2 are the final pressure and volume, and n is the polytropic index. Substituting the given values, we have:

(200 kPa)(0.3 m3)^n = (4)(0.6 m3)^n

Dividing both sides by (0.3 m3)^n and taking the logarithm of both sides, we get:

log(200) + nlog(0.3) = log(4) + nlog(0.6)

Solving for n, we get:

n = log(4/200) / log(0.6/0.3) ≈ 1.235

Using the polytropic work equation:

W = (P2V2 - P1V1) / (1 - n)

Substituting the given values, we have:

W = [(4 kPa)(0.6 m3) - (200 kPa)(0.3 m3)] / (1 - 1.235) = 233.7 kJ

So the work done by the gas during the process is 233.7 kJ.

Learn more about Gas Law at:

https://brainly.com/question/27009857

#SPJ2

Answer:

Both

Explanation:

Answer:

Explanation:

A scenario is an actual sequence of interactions (i.e., an instance) describing one specific situation; a use case is a general sequence of interactions (i.e., a class) describing all possible scenarios associated with a situation. Scenarios are used as examples and for clarifying details with the client. Use cases are used as complete descriptions to specify a user task or a set of related system features.

Solution :

Assuming that the wire has an uniform temperature, the equivalent convective heat transfer coefficient is given as :

[tex]$h_T= \epsilon \sigma (T_s+T_{surr})(T_s^2 +T^2_{surr})$[/tex]

[tex]$h_T= 0.20 \times 5.67 \times 10^{-8} (1473+323)(1473^2 +323^2)$[/tex]

[tex]$h_T=46.3 \ W/m^2 .K$[/tex]

The total heat transfer coefficient will be :

[tex]$h_T=(250+46.3) \ W/m^2 .K$[/tex]

    [tex]$=296.3 \ W/m^2 .K$[/tex]

Now calculating the maximum volumetric heat generation :

[tex]$\dot {q}_{max}=\frac{2h_t}{r_0}(T_s-T_{\infty})$[/tex]

[tex]$\dot {q}_{max}=\frac{2\times 296.3}{0.0005}(1200-50)$[/tex]

        [tex]$= 1.362 \times 10^{9} \ W/m^3$[/tex]

The heat generation inside the wire is given as :

[tex]$\dot{q} = \frac{I^2R}{V}$[/tex]

Here, R is the resistance of the wire

         V is the volume of the wire

∴ [tex]$\dot{q} = \frac{I^2\left( \rho \times \frac{L}{A} \right)}{A \times L}$[/tex]

     [tex]$=\frac{I^2 \rho}{\left(\frac{\pi}{4}D^2 \right)}$[/tex]

where, ρ is the resistivity.

[tex]$I_{max}= \left(\frac{\dot{q}_{max}}{\rho} \right)^{1/2} \times \frac{\pi}{4}D^2$[/tex]

[tex]$I_{max}= \left(\frac{1.36 \times 10^9}{10^{-6}} \right)^{1/2} \times \frac{3.14}{4}(1 \times 10^{-3})^2$[/tex]

        = 28.96 A

Now considering the relation for the current flow through the finite potential difference.

[tex]$E=I_{max} \times R$[/tex]

[tex]$E=I_{max} \times \rho \times \frac{L}{A}$[/tex]

[tex]$L=\frac{AE}{I_{max} \ \rho}$[/tex]

[tex]$L=\frac{\frac{\pi}{4} \times (1 \times 10^{-3})^2 \times 110}{28.96 \times 10^{-6}}$[/tex]

   = 2.983 m

Now calculating the power rating of the heater:

[tex]$P= E \times I_{max}$[/tex]

[tex]$P= 110 \times 28.96}$[/tex]

   = 3185.6 W

   = 3.1856 kW

Answer:

Total time taken = 0.769 hour

Explanation:

using the velocity method

for sheet flow ;

Tt = [tex]\frac{0.007(nl)^{0.8} }{(Pl)^{5}s^{0.4} }[/tex]  

Tt = travel time

n = manning CaH

Pl = 25years

L = how length ( ft )

s = slope

For Location ( 1 )

s = 0.045

L = 1000 ft

n = 0.06 ( from manning's coefficient table )

Tt1 = 0.128 hour

For Location ( 2 )

s = 2.5 %

L= 750

n = 0.13

Tt2 = 0.239 hour

For Location ( 3 )

s = 1.5%

L = 500 ft

n = 0.15

Tt3 = 0.237  hour

For Location (4)

s = 0.5 %

L = 250 ft

n = 0.011

Tt4 = 0.165 hour

hence the Total time taken = Tt1 + Tt2 + Tt3 + Tt4

                                              = 0.128 + 0.239 + 0.237 + 0.165 = 0.769 hour

Answer:

Explanation:

From the given information:

The equation for applied stress can be expressed as:

[tex]\sigma_{app} = \dfrac{\tau_{CRSS}}{cos \phi \ cos \lambda}[/tex]

where;

[tex]\phi[/tex] = angle between the applied stress [100] and [111]

To determine the [tex]\phi[/tex] and [tex]\lambda[/tex] for the system

Using the equation:

[tex]\phi= cos^{-1}\Big [\dfrac{l_1l_2+m_1m_2+n_1n_2}{\sqrt{(l_1^2+m_1^2+n_1^2)(l_2^2+m_2^2+n_2^2)}}\Big][/tex]

for [100]

[tex]l_1 = 1, m_1 = 0, n_1 = 0[/tex]

for [111]

[tex]l_1 = 1 , m_1 = 1, n_1 = 1[/tex]

Thus;

[tex]\phi= cos^{-1}\Big [\dfrac{1*1+0*1+0*1}{\sqrt{(1^2+0^2+0^2)(1^2+1^2+1^2)}}\Big][/tex]

[tex]\phi= cos^{-1}\Big [\dfrac{1}{\sqrt{(3)}}\Big][/tex]

[tex]\phi= 54.74^0[/tex]

To determine  [tex]\lambda[/tex]  for [tex][1 \overline 1 0][/tex]

where;

for [100]

[tex]l_1 = 1, m_1 = 0, n_1 = 0[/tex]

for [tex][1 \overline 1 0][/tex]

[tex]l_1 = 1 , m_1 = -1, n_1 = 0[/tex]

Thus;

[tex]\lambda= cos^{-1}\Big [\dfrac{1*1+0*1+0*0}{\sqrt{(1^2+0^2+0^2)(1^2+(-1)^2+0^2)}}\Big][/tex]

[tex]\phi= cos^{-1}\Big [\dfrac{1}{\sqrt{(2)}}\Big][/tex]

[tex]\phi= 45^0[/tex]

Thus, the magnitude of the applied stress can be computed as:

[tex]\sigma_{app} = \dfrac{\tau_{CRSS}}{cos \phi \ cos \lambda }[/tex]

[tex]\sigma_{app} = \dfrac{2.00}{cos (54.74) \ cos (45) }[/tex]

[tex]\mathbf{\sigma_{app} =4.89 \ MPa}[/tex]

Answer:

Burj Khalifa is located in dubai UAE at over 828m

Explanation:

828 metres

Answer:

The Burji Khalifa, known as the Burj Dubai prior to its inauguration in 2010, is a skyscraper in Dubai, United Arab Emirates. With a total hight of 829.8 m and a roof hight of 828 m, the Burji Khalifa has been the tallest structure and building in the world since its topping out in 2009.

Answer

The skateboarder applies pressure to the trucks and gives/releases pressure on the levers. Second, the wheels and the axles are also examples of simple machines. They help the skater ride, spin, grind, and do a bunch of other radical movements on a skateboard.:

Explanation: