Answer:
Horizontal Work done + vertical work done
Explanation:
1.) First calculate the work done to move box in horizontal direction:
W = Fs
= 25N × 120m
= 3000 Joules
2.) Work done against gravity in vertical direction:
Ep = mgh
= 90x10x.0.5
= 450 Joules
Total Work done = 3000 + 450 = 3450 Joules
Which of the following is a vector quantity?
Answer:
D
Explanation:
A vector quantity is an object with both magnitude and direction, like velocity.
:))
The density of aluminum is 2700 kg/m3. If transverse waves propagate at 34 m/s in a 4.6-mm diameter aluminum wire, what is the tension on the wire
Answer:
52N
Explanation:
v=SQRT(T/μ), μ=pA, A=πr^2
v=SQRT(T/pπr^2)
v^2=T/pπr^2
v^2*pπr^2=T
34^2*2700*π*0.0023^2=T
T=52N
The tension on the aluminum wire at the given density is 52.02 N.
Tension in the wire
The tension in the wire is calculated using the following formulas;
[tex]v = \sqrt{\frac{T}{\mu} }[/tex]
where;
v is speed of the sound waveT is the tension in the wireμ is mass per unit lengthArea of the aluminum wireA = πd²/4
A = π x (4.6 x 10⁻³)²/4
A = 1.66 x 10⁻⁵ m²
Mass per unit length of the wireμ = ρA
μ = 2700 kg/m³ x 1.66 x 10⁻⁵ m²
μ = 0.045 kg/m
Tension on the wire[tex]34 = \sqrt{\frac{T}{0.045} } \\\\34^2 = \frac{T}{0.045}\\\\T = (34^2)(0.045)\\\\T = 52.02 \ N[/tex]
Thus, the tension on the aluminum wire at the given density is 52.02 N.
Learn more about tension on wire here: https://brainly.com/question/14336853
Electricity consumption in the United States totaled about ____________ kilowatthours (kWh) in 2015.
Answer:
3,900
Explanation:
Explain how energy changes in the spring toy below when it goes downstairs
Answer:
As a pendulum swings, its potential energy changes to kinetic energy, then back to potential energy, then back to kinetic energy, and so forth.
hope this helped<3
A ray of light travelled from water into the air an angle of incidence of 30°. Calculate;
a) Its speed in water
b) angle of refraction in air. (Refractive index of water = 1.33)
c) Speed of light in air = 3.0 × 10⁸ m/s
hence calculate the critical angle of light in water.
Answer:
speed = distance/time
just find the speed if it
The diagram below shows a pendulum in motion.
At what point(s) does the pendulum possess the least potential energy?
A. Points 1, 3, and 5 only
B. Points 2 and 4 only
C. Points 1 and 5 only
D. Point 3 only
Answer:
Potential Energy is given as:
P.E = mgh
which means P.E is directly proportional to height 'h'.
Kinetic Energy is given as:
K.E = (1/2)mv²
which means K.E is directly proportional to velocity 'v²'.
Total Energy of Pendulum = K.E + P.E
1. The pendulum has the most potential energy at extreme position because the height is maximum at the extreme position.
2. The pendulum has the least kinetic energy at extreme position because the velocity is zero at extreme position.
3. The pendulum has most kinetic energy at the mean position because the velocity is maximum at this point.
4. The pendulum has the least potential energy at the mean position because the height is minimum.
A rule to remember: The point where K.E is maximum, P.E is zero at this point and vice versa.Potential Energy is given as:
P.E = mgh
which means P.E is directly proportional to height 'h'.
Kinetic Energy is given as:
K.E = (1/2)mv²
which means K.E is directly proportional to velocity 'v²'.
Total Energy of Pendulum = K.E + P.E
1. The pendulum has the most potential energy at extreme position because the height is maximum at the extreme position.
2. The pendulum has the least kinetic energy at extreme position because the velocity is zero at extreme position.
3. The pendulum has most kinetic energy at the mean position because the velocity is maximum at this point.
4. The pendulum has the least potential energy at the mean position because the height is minimum.
A rule to remember: The point where K.E is maximum, P.E is zero at this point and vice versa.Potential Energy is given as:
P.E = mgh
which means P.E is directly proportional to height 'h'.
Kinetic Energy is given as:
K.E = (1/2)mv²
which means K.E is directly proportional to velocity 'v²'.
Total Energy of Pendulum = K.E + P.E
1. The pendulum has the most potential energy at extreme position because the height is maximum at the extreme position.
2. The pendulum has the least kinetic energy at extreme position because the velocity is zero at extreme position.
3. The pendulum has most kinetic energy at the mean position because the velocity is maximum at this point.
4. The pendulum has the least potential energy at the mean position because the height is minimum.
A rule to remember: The point where K.E is maximum, P.E is zero at this point and vice versa.
Explanation:
What is the relationship between kinetic energy and changing states of matter?
Answer:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.
A 76-kg water skier is being pulled by a nylon (Young's modulus 3.7 x 109 N/m2) tow rope that is attached to a boat. The unstretched length of the rope is 19 m and its cross-section area is 1.6 x 10-5 m2. As the skier moves, a resistive force (due to the water) of magnitude 140 N acts on her; this force is directed opposite to her motion. What is the change in length of the rope when the skier has an acceleration whose magnitude is 0.61 m/s2?
Newton's second law and the definition of Young's modulus allows us to find the change in length in the chord is:
Length change is: ΔL = 5.98cm
Given parameters
Mass of the water skier m = 76 kg Young's modulus of chord Y = 3.7 10⁹ N / m² Chord length Lo = 19 m. The area of the curda is a = 1.6 10-5 m² Friction force with water fr = 140 N. Acceleration a = 0.61 m / s²To find
The change in length of the chord.
Newton's second law says that the net force on a body is directly proportional to its mass and acceleration.
∑ F = m a
where bold letters indicate vectors, F is force, m is mass, and acceleration.
A free-body diagram is a diagram of the forces without the details of the bodies, see attached.
T-fr = m a
T = ma + fr
Let's calculate.
T = 76 0.61 + 140
T = 186.36 N
Yung's modulus is defined by the relationship between stress and strain.
[tex]Y = \frac{\frac{F}{A} }{\frac{\Delta L}{L_o} }[/tex]
[tex]\Delta L = \frac{F}{A} \ \frac{L_o}{Y}[/tex]
Let's calculate.
ΔL = [tex]\frac{186.36}{1.6 \ 10^{-5}} \ \frac{19}{3.7 \ 10^9}[/tex]
ΔL = 5.98 10⁻² m = 5.98 cm
In conclusion using Newton's second law and Young's modulus definition we can find the change in length in the chord is:
Length change is: ΔL = 5.98cm
Learn more about Young's Module here: brainly.com/question/13346614
What does NOT experience gravity?
Answer:
Astronauts who are orbiting the Earth often experience sensations of weightlessness. These sensations experienced by orbiting astronauts are the same sensations experienced by anyone who has been temporarily suspended above the seat on an amusement park ride. Not only are the sensations the same (for astronauts and roller coaster riders), but the causes of those sensations of weightlessness are also the same. Unfortunately however, many people have difficulty understanding the causes of weightlessness.
‼️ IN DESPERATE NEED OF HELP ‼️ i have a time limit of 20 minutes and i’m so lost, please help with a step-by-step explanation
The blue color of the sky results from the scattering of sunlight by air molecules. If the blue light of the sky
has a frequency of about 7.5 x 10“ Hz, what is the wavelength of this radiation (in m)?
0.00004
Explanation:
velocity of electromagnetic waves = 3.0×10^8.
Wavelength=velocity/frequency
(3.0×10^8) (7.5×10^12)
I am giving 100 points for you to answer 3 questions...
Question 1:
Research the fossil record of humpback whales and answer these questions:
Name at least two extinct species that share a close evolutionary relationship with humpback whales.
Explain the similarities and differences that exist between these species and humpback whales.
Is the fossil record complete for humpback whales? Explain your answer.
Question 2:
Explain scientifically whether humans and humpback whales share a close evolutionary relationship. Here are some ideas to consider as you structure your response:
Do they have any body structure similarities that suggest an evolutionary link?
How do scientists classify each organism? What is their kingdom, phylum, class order, and so on? Does this tell you anything about their evolutionary lineage?
Does their embryology hold any clue to their evolutionary relationship?
Question 3:
Conclude your research on humans and humpback whales by answering these questions:
What conclusion can you draw about the evolution of humans and humpback whales?
Did your research show that your original predictions were correct? Explain your answer.
Answer:
Two extinct species that share a close evoluntionary relationship with humpback whales are Dourdon and Basilosaurs. They had tailfins
No we do not have any body structure similarities to them. Scientist classify each organism by looking at their characteristics and their appearance. Yes it tells you something about the evoluntinary lineage becuase throw characteristics it can show how they have evolved
The conclusions that I can draw is that we do have some things common with humpback whales. Yes my original predictions were correct. They do have a common evoluntianry link as I stated in the beginning. I learned alot more than I knew at first about the similarties.
Explanation:
run me my points gimme 5 stars and a thanks. Why? cus i ran dem answers cmon now
Answer:
the person above me is right
Explanation:
In the simulation, start with m1 = 200 kg and m, = 400 kg with their centers 8 meters apart. If you want to increase in the gravitational force between the two masses by the greatest amount, should you double the mass of m, or should you halve the distance sentences, explain which option would create the greater increase in the gravitational force and why. (2 points)
To double the gravitational force between the two blocks, double the mass of the blocks and keep the distance between constant.
The given parameters;
mass of the first block, m₁ = 200 kgmass of the second block, = 400 kgcenter mass of the blocks, r = 8 mThe gravitational force between the two mass is calculated by applying Newton's law of universal gravitation as follows;
[tex]F = \frac{Gm_1 m_2}{r^2}[/tex]
The magnitude of the gravitational force increases with increase in the mass of the blocks and decreases with increase in the distance between the blocks.
To double the gravitational force between the blocks, double the mass of the blocks;
[tex]F = \frac{G(2m_1)(2m_2)}{r^2} \\\\F = 2 \times \frac{Gm_1 m_2}{r^2}[/tex]
Thus, to double the gravitational force between the two blocks, double the mass of the blocks and keep the distance between constant.
Learn more here:https://brainly.com/question/10609143
What is the smallest possible wavelength of light?
Explanation:
Blue or violet light has the shortest wavelength. White light is a combination of all colors in the color spectrum.
It's not A. Please help.
Answer:
It represents double composition
Suppose that the system were placed in an elevator that accelerates downward at 2 m/s2. What would the scale read?.
The reading on the scale when the system is placed on elevator accelerating downward is 7.8m (N).
The given parameter
downward acceleration, a = 2 m/s²The reading on the scale is determined by applying Newton's second law of motion;
R = mg - ma
R = m(g - a)
R = m(9.8 - 2)
R = 7.8 m. (N)
where;
m is the mass of the systemThus, the reading on the scale when the system is placed on elevator accelerating downward is 7.8m (N).
Learn more about Newton's second law and reading on scale here: https://brainly.com/question/11603452
please help ! Which of the following objects has the greatest momentum?
Answer:
maybe the third one....
Compare and contrast gravitational potential energy and elastic potential energy?
Answer:
The gravitational potential energy of an item is determined by its weight and height above the ground, whereas elastic potential energy is determined by the form of the object. When an elastic item is stretched or compressed, this occurs.
In elementary school, 40% of girls and 25% of boys are unhappy with the shapes of their bodies. OA. True O B. False
If the absolute temperature of a gas is doubled and the pressure of the gas is doubled, how will the volume change
Answer: the volume quadruples
Explanation:
A ball was positioned in the middle of a smooth ramp and allowed to roll
downward. How does the total mechanical energy of the ball before it is
released compare to its total mechanical energy at the bottom of the ramp?
Assume there is no friction.
Answer:
These are all the forces acting on the ball: friction, gravity, and a normal force.
Explanation:
At the middle of the ramp their will be potential energy associated with the ball and the total mechanical energy will be equal to its potential energy . At the bottom of the ramp their will be kinetic energy associated with the ball and total mechanical energy will be equal to its kinetic energy .
What is mechanical energy ?Mechanical energy is the energy that is possessed by an object due to its motion or due to its position.
Total mechanical energy = potential energy + kinetic energy
When ball is positioned in the middle of the ramp , the ball is at rest , which implies that total mechanical energy is equal to potential energy possessed by the ball and their is no kinetic energy at that instant of time , after that it came under the action of forces due to which it rolls down and its potential energy starts converting into kinetic energy and the total mechanical energy will be the sum of potential as well as kinetic energy and when it reaches at the bottom of the ramp the total mechanical energy will be kinetic energy of the ball.
learn more about mechanical energy
https://brainly.com/question/12319302?referrer=searchResults
#SPJ2
Which gas is least likely to obey the ideal gas laws at very high pressures and very low temperatures?
Answer:
Xe
Explanation:
At low temperatures or high pressures, real gases deviate significantly from ideal gas behavior. It is also good to know that ideal gas law assumes that the gas molecules have negligible/no size.
Keeping that in mind, Xe is the largest of the bunch, and therefore is expected to have the greatest deviation of the ideal gas when under high pressure or low temperature.
Hope this helped
when a wave moves through an opening in a barrier it
A.is reflected
B.bends and spreads out
C.Forms nodes and antinodes
D.speeds up
Please if someone knows the answer please tell me
Answer:
i think its electrostatic force
1. State Newton's 3 laws of motion in your own words.
1st law INERTIA
2nd law (Force = mass x acceleration)
3rd law (all actions have opposite reaction)
Keeping in mind that not all flasks are vacuum, Please help me explain how other flasks prevent heat loss?
A 50,000 kg plane is flying at a constant velocity of 130 m/s. Is the plane in a state of equilibrium
Answer:
yes
Explanation:
Equilibrium means that all the forces acting upon the object are balanced. A cruising airplane has all four forces balanced, with no external forces acting on it. As a result it will remain in its motion at a constant velocity until an external force acts upon it
how many times has the u.s. landed astronauts on the moon?
Answer:
six crewed landings
Explanation:
A 65 kg passenger in a car travels at a speed of 8.0 m/s. If the passenger is stopped by an airbag in 0.75 s, how much force is required?
F=ma,a,=v/t ,=65(8/0.75)=693.33
What is resistanance?
Answer:
Resistance is a measure of the oppostion to flow current in a electrical circuit
Explanation:
I hope it's help u army
A race car travels on a straight racetrack with
a forward velocity of 44 m/s and slows at a
constant rate to a velocity of 22 m/s over 11 s.
How far does it move during this time?
Answer:968 m/s
Explanation:
If a race car travels on a straight racetrack with a forward velocity of 44 m/s and slows at a constant rate to a velocity of 22 m/s over 11 s, then the distance traveled by the race car would be 343 m.
What are the three equations of motion?There are three equations of motion given by Newton
The first equation is given as follows
v = u + at
the second equation is given as follows
S = ut + 1/2×a×t²
the third equation is given as follows
v² - u² = 2×a×s
As given in the problem Question a race car travels on a straight racetrack with a forward velocity of 44 m/s and slows at a constant rate to a velocity of 22 m/s over 11 s,
initial velocity = 22 m/s
final velocity = 44 m/s
time = 11 s
By using the first equation of motion,
v = u + at
44 = 22 + 11a
11a = 22
a = 2 m/s²
By using the second equation of motion,
S = ut + 1/2*a*t²
u= 22m/s , a= 2m/s² and t = 11seconds
S = 22*11 + 0.5*2*11²
S = 222+121
S= 343 m
Thus, the distance covered by the race car would be 343 m.
Learn more about equations of motion from here,
brainly.com/question/5955789
#SPJ2
