In the titration between hcl and naoh what’s the medium at the end point and why ?

Answer:

Explanation:

Here are the labels for each situation:

1.Usually conducts electricity & heat well - Metal (1)

2.At room temperature these are gases or liquids - Nonmetal (2)

3.Will lose valance electrons to form compounds - Metal (1)

4.Can be used as semiconductors - Metalloid (3)

5.Will gain valance electrons to form compounds - Nonmetal (2)

The mass of Na₃PO₄ formed during the reaction is 328 g.

The balanced chemical equation for the reaction is:

[tex]3NaOH + Na_3PO_4 - > 3Na_2PO_4 + H_2O[/tex]

From the equation, we can see that 3 moles of NaOH produce 1 mole of Na₃PO₄.

Given that 2.0 moles of Na₃PO₄ is produced, we can set up a proportion to find the amount of NaOH required:

3 mol NaOH / 1 mol Na₃PO₄ = x mol NaOH / 2.0 mol Na3PO4

Solving for x, we get:

x = (3 mol NaOH / 1 mol Na₃PO₄) × (2.0 mol Na₃PO₄ / 1) = 6.0 mol NaOH

So, 6.0 moles of NaOH are required to produce 2.0 moles of Na₃PO₄.

To find the mass of Na₃PO₄ produced, we can use its molar mass:

mass = moles × molar mass = 2.0 mol × 164 g/mol = 328 g

Therefore, the mass of Na₃PO₄ formed during the reaction is 328 g.

learn more about limiting reactants here

https://brainly.com/question/26905271

#SPJ1

The temperature of the sample in degrees Celsius is 358.14°C.

The temperature of a substance can be calculated by using the following ideal gas law expression;

PV = nRT

Where;

According to this question, 3.24 mol of an ideal gas has a pressure of 2.19 atm and a volume of 76.67 L. The temperature can be calculated as follows;

2.19 × 76.67 = 3.24 × 0.0821 × T

167.9073 = 0.266004T

T = 167.9073/0.266004

T = 631.14K

T {°C} = 631.14 - 273 = 358.14°C

Learn more about temperature at: https://brainly.com/question/15354399

#SPJ1

There are 15.4 equivalents of chloride ion present in the solution

We need to multiply the total number of moles of chloride ion in the solution by the number of equivalents.

The molar mass of NaCl is 58.44 g/mol, so 3.5 mol of NaCl contains :

3.5 mol NaCl x 2 mol Cl⁻/1 mol NaCl = 7 mol Cl⁻

Similarly, the molar mass of MgCl₂ is 95.21 g/mol, so 4.2 mol of MgCl₂ contains:

4.2 mol MgCl₂ x 2 mol Cl⁻/1 mol MgCl₂ = 8.4 mol Cl⁻

Therefore, the total number of moles of chloride ion in the solution is:

7 mol Cl⁻ + 8.4 mol Cl⁻ = 15.4 mol Cl⁻

By dividing the total number of moles by the number of equivalents per mole, we can finally determine how many equivalents of the chloride ion there are. There is one equivalent of the chloride ion per mole since it has a valency of -1.

15.4 mol Cl⁻ x 1 eq/mol = 15.4 eq

So there are 15.4 equivalents of chloride ion present in the solution.

Learn more about mole here : brainly.com/question/30337257

#SPJ1

Boiling point of solution will be 100 C. The incorrect statement is C)

An aqueous solution is one in which water serves as the solvent. One or more substances are dissolved in water to create such a solution, and the water molecules surround and separate the individual solute particles to create a homogeneous mixture.

Therefore, A solvent's boiling point and freezing point change when a solute is dissolved in it, respectively. Boiling point elevation and freezing point depression are two terms used to describe this occurrence. The concentration of the solute determines how much of an impact it has.

Learn more about aqueous solution here : brainly.com/question/31029232

#SPJ1

Plants rely on their leaves to produce food through a process called photosynthesis. This involves converting light energy into organic compounds, like sugars, using chloroplasts that contain the pigment chlorophyll. By combining carbon dioxide and water with light energy, plants create glucose, which serves as an energy source and building material. Along with stomata, which help regulate gas exchange with the environment, the leaf acts as the plant's primary kitchen for food production.

Answer:

3.29 grams

Explanation:

This is found by multiply 2.35 L by 1.4 g/L that is because the liters will cancel each other out leaving just grams. [tex]\frac{g}{L} * \frac{L}{1}[/tex]

The balanced chemical equation for the electrolysis of water is:

2H2O → 2H2 + O2

This equation shows that for every two moles of water that are electrolyzed, one mole of oxygen gas is produced. To solve this problem, we need to first convert the given mass of water (83.7 grams) to moles of water.

The molar mass of water (H2O) is:

2(1.008 g/mol H) + 15.999 g/mol O = 18.015 g/mol

So, 83.7 grams of water is equal to:

83.7 g / 18.015 g/mol = 4.646 mol H2O

Next, we need to determine how many moles of oxygen gas will be produced when 4.646 moles of water are electrolyzed. Since the mole ratio of water to oxygen is 2:1, we can use the following proportion:

2 mol H2O : 1 mol O2 = 4.646 mol H2O : x mol O2

Solving for x, we get:

x mol O2 = (1 mol O2 / 2 mol H2O) * 4.646 mol H2O = 2.323 mol O2

Finally, we can convert the moles of oxygen gas produced to grams using the molar mass of oxygen:

2.323 mol O2 * 32.00 g/mol O2 = 74.3 g O2

Therefore, 83.7 grams of water will produce 74.3 grams of oxygen gas by electrolysis.

Answer:

Data collection is the act of obtaining information from diverse sources, and data analytics is the process of processing that information to derive practical insights.

Explanation:

Answer:

D

Explanation:

to keep seeds safe and make them easier to spread

Answer:

D. to keep seeds safe and make them easier to spread

Explanation:

The main reason plants grow fruit is to aid in the protection and spreading of seeds. The fruit protects the seeds and also helps to spread them. Many fruits are good to eat and attract small animals, such as birds and squirrels, who like to feed on them. The seeds pass through them unharmed and then get spread through their droppings. So, the correct answer would be D.

Answer:

The Correct answer is option 3

Step by Syep Explanation:

4Fe+3O2---->rust

formula for rust----->Fe2O3

4Fe+3O2---->Fe2O3

Balancing the Chemical Equation

both the reactant and product side

we have that;

4Fe+3O2------->2FeO3

the equation is Chemically Balanced

therefore 4Fe+3O2------->2×rust

Answer:

Explanation:

Given that,

Law of conservation of mass states that " Mass of reactants is equal to the mass of products".

Also we know that In a balanced equation the total number of atoms in the reactants equals the total number of atoms in the product.

We are given with 4Fe + 3O₂ i.e the reactant.

First Let's calculate the number of atoms in the reactant.

Now, Let's find the product .

Also, We can see 2Fe₂O₃ (Product)

4Fe + 3O₂ → 2Fe₂O₃

Number of atoms in the reactants = the total number of atoms in the product.

Therefore, 2Fe₂O₃ (Option 3) will the required answer .

The volume of the 1.5M solution of HCl solution that has 145g of mass is 2.65L.

The volume of a solution can be calculated by dividing the number of moles by its molar concentration as follows;

Volume = no of moles ÷ molarity

According to this question, a 1.5M solution of HCl has 145g of mass. The number of moles can be calculated as follows:

no of moles = 145g ÷ 36.5g/mol = 3.973 moles

volume of HCl solution = 3.973mol ÷ 1.5M

volume of HCl = 2.65L

Learn more about volume at: https://brainly.com/question/14710169

#SPJ1

The most basic level of organization that can perform functions like converting food into energy is the cell.

The most basic level of organization that can perform functions like converting food into energy is the cell. Cells are the fundamental units of life and are capable of various functions, including metabolism, which involves converting food into energy through processes such as cellular respiration.

Cells can be found in all living organisms, from single-celled bacteria to complex multicellular organisms like plants and animals. Within a cell, various organelles such as mitochondria, which are responsible for energy production, carry out specialized functions to support the overall cellular function. Therefore, the cell is the smallest and most basic level of organization that is capable of performing functions like converting food into energy.

For more questions on:  converting

https://brainly.com/question/30632038

#SPJ11

To solve this problem, we can use the formula:

q = m × c × ΔT

where q is the heat absorbed or released, m is the mass of the substance, c is its specific heat, and ΔT is the change in temperature.

First, let's calculate the mass of water:

m = 225.0 g

Next, let's calculate the heat absorbed by the water:

q_water = m × c × ΔT

q_water = 225.0 g × 4.184 J/(g·°C) × (24.60°C - 20.53°C)

q_water = 3749.8 J

Since the metal released 4274 J of heat, the heat absorbed by the calorimeter can be calculated by subtracting the heat absorbed by the water from the total heat released by the metal:

q_calorimeter = - (q_water + q_metal)

q_calorimeter = - (3749.8 J + 4274 J)

q_calorimeter = - 8023.8 J

Therefore, the heat absorbed by the calorimeter is -8023.8 J, which is approximately equal to -8000 J or -8.0 kJ. The answer is (c) -339 J, since it is the closest to the calculated value when rounded to the nearest integer. Note that the negative sign indicates that the calorimeter absorbed the heat, which is expected since the reaction involved a release of heat.

For P₂O₅ the intermolecular forces such as van der Waals forces, dipole-dipole interactions, and hydrogen bonding must be overcome.

For HI the intermolecular forces that must be overcome are as van der Waals forces, dipole-dipole interactions, and hydrogen bonding.

P₂O₅ is a covalent compound and it is solid. To convert P₂O₅ from a solid to a gas, intermolecular forces such as van der Waals forces, dipole-dipole interactions, and hydrogen bonding must be overcome.

HI is a covalent compound that is a gas at room temperature and pressure. To convert HI from a liquid to a gas, intermolecular forces such as van der Waals forces, dipole-dipole interactions, and hydrogen bonding must be overcome.

Learn more about intermolecular forces here: https://brainly.com/question/2193457

#SPJ1

The correct answer is D. to have eight electrons in their valence shells.

A covalent bond is a chemical relationship that requires the sharing of electrons between atoms to generate electron pairs. These electron couples are known as bonding pairs or sharing pairs.

Covalent bonding is the steady balance of attractive and repulsive forces between atoms when they share electrons.

Covalent Bond Types

Learn more about Covalent Bond  here:

https://brainly.com/question/3447218

#SPJ1

The percent difference between the first two trials is 8.3% and final outcome would be an average molarity of 0.108 M.

To calculate the percent difference between the first two trials, use the formula:

% Difference = |(Value 1 - Value 2) / ((Value 1 + Value 2) / 2)| x 100%

% Difference = |(0.104 M - 0.113 M) / ((0.104 M + 0.113 M) / 2)| x 100%

% Difference = |-0.009 M / 0.1085 M| x 100%

% Difference = 8.3%

The percent difference between the first two trials is 8.3%.

To find the average molarity, add the three calculated concentrations together and divide by the number of trials:

Average Molarity = (0.104 M + 0.113 M + 0.108 M) / 3

Average Molarity = 0.108 M

Based on the lab procedures guidelines, the average molarity would be the most accurate representation of the unknown concentration of HCI. Therefore, the average molarity of 0.108 M would be the final result.

Find out more on percent difference here: https://brainly.com/question/10791047

#SPJ1

The mass of hydrogen gas produced, given that 525 mL of the gas was collected over water is 0.04 grams

First, we shall determine the mole of the dry hydrogen gas collected. Details below:

PV = nRT

0.9357 × 0.525 = n × 0.0821 × 298

Divide both sides by (0.0821 × 298)

n = (0.9357 × 0.525) / (0.0821 × 298)

n = 0.02 mole

Finally, we shall determine the mass of the hydrogen gas produced. Details below:

Mole = mass / molar mass

0.02 = Mass of H₂ / 2

Cross multiply

Mass of H₂ = 0.02 × 2

Mass of hydrogen gas, H₂ = 0.04 grams

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

The value of the equilibrium constant, K, for the reaction is 0.0049

The following data were obtained from the quesion:

The equilibrium constant for the reaction can be obtain as illustrated below:

Equilibrium constant = [B₂][AC] / [AB₂C]

Equilibrium constant = (0.007 × 0.0118) / 0.0168

Equilibrium constant = 0.0049

Thus, from the above calculation, the equilibrium constant, K for the reaction is 0.0049

Learn more about equilibrium constant:

https://brainly.com/question/16589765

#SPJ1

Answer:

see in your book properly

The molar enthalpy for the reaction 4 NH₃ (g) + 5 O₂ (g) → 4 NO (g) + 6 H₂O (g) is 266.4 kJ/mol.

The molar enthalpy is determined from Hess's law as follows:

Equation 1 x2:

2 N₂ (g) + 2 O₂ (g) → 4 NO (g) ∆H° = 361.2 kJ/mol

Equation 3 x3, :

6 H₂ (g) + 3 O₂ (g) → 6 H₂O (g) ∆H° = -1451.1 kJ/mol

Equation 2 x -4:

-8 N₂ (g) - 12 H₂ (g) → -8 NH₃ (g) ∆H° = 367.2 kJ/mol

Adding the equations together:

-6 N₂ (g) - 6 H₂ (g) + 5 O₂ (g) → 4 NO (g) + 6 H₂O (g) - 8 NH₃ (g) ∆H° = 266.3 kJ/mol

Multiplying the equation above by -1/2:

3 N₂ (g) + 3 H₂ (g) - 5/2 O₂ (g) → -2 NO (g) - 3 H₂O (g) + 4 NH₃ (g) ∆H° = -133.2 kJ/mol

Multiplying the above equation by -2:

4 NH₃ (g) + 5 O₂ (g) → 4 NO (g) + 6 H₂O (g) ∆H° = 266.4 kJ/mol

This is the molar enthalpy of the given reaction

Learn more about molar enthalpy at: https://brainly.com/question/29295293

#SPJ1

The average mass of chromium is 52.1. Isotopic mass is defined as the average mass of all the isotopes of a specific element.

The average atomic mass of an element is referred to as the sum of the masses of its isotopes, each multiplied by its natural abundance which can be also explained as the decimal associated with the percent of atoms of that element that are of a given isotope. Average atomic mass is equal to f1M1 + f2M2 and so on. Hydrogen, chromium, lithium, cobalt, oxygen, boron, plutonium, and carbon are some examples.

Learn more about isotopes, here:

https://brainly.com/question/11680817

#SPJ1

B. To plot the data on a bar chart, draw a horizontal axis for metals and a vertical axis for time to complete the reaction. Then, draw bars for each metal that represent the amount of time required to complete the reaction. The height of the bars must match the time values ​​in the table.

C. No, Emilia was not correct in her forecast. According to the data, aluminum reacted 100 seconds faster than magnesium, which reacted in 50 seconds. Thus aluminum reacts more rapidly with hydrochloric acid than magnesium.

From most reactive to least reactive, the metals are as follows:

This order is consistent with the reactivity series, which is:

We are unable to estimate the reactivity of potassium, sodium, calcium, copper, silver, or gold from this experiment because those variables are not present in the data.

Learn more about reactivity series, here:

https://brainly.com/question/30670473

#SPJ1

The number of molecules of BF₃ present in 2 grams of BF₃ is 1.776×10²² molecules (1st option)

We'll begin by calculating the number of mole of 2 grams of BF₃. Details below:

Mole = mass / molar mass

Mole of BF₃ = 2 / 67.81

Mole of BF₃ = 0.02949 mole

Finally, we shall determine the number of molecules of BF₃. This is shown below:

Avogadro's hypothesis suggest that:

1 mole of BF₃ = 6.022×10²³ molecules

Therefore,

0.02949 mole of BF₃ = 0.02949 × 6.02×10²³

0.02949 mole of BF₃ = 1.776×10²² molecules

Thus, the number of molecules of BF₃ is 1.776×10²² molecules (1st option)

Learn more about number of molecules:

https://brainly.com/question/29046368

#SPJ1

When water and oxygen react in the presence of an acid, the oxygen can oxidize the acid to produce a compound and release hydrogen ions.

Reaction:

The reaction is as follows and it's diagram mentioned below.

Acid + Oxygen + Water → Compound + Hydrogen ions

if we take the acid hydrochloric acid (HCl), the reaction with oxygen and water can produce the compound chlorine dioxide ([tex]ClO_{2}[/tex]) and hydrogen ions ([tex]H^{+}[/tex]):

2 HCl + [tex]O_{2}[/tex] + [tex]H_{2}O[/tex] → 2 [tex]ClO_{2}[/tex] + 4 [tex]H^{+}[/tex]

This type of reaction is known as an oxidation-reduction reaction or a redox reaction, where one species is oxidized (loses electrons) while the other is reduced (gains electrons).

What is redox reaction?

A redox reaction, also known as an oxidation-reduction reaction, is a type of chemical reaction in which there is a transfer of electrons between two species. One species undergoes oxidation, meaning it loses electrons, while the other species undergoes reduction, meaning it gains electrons.

Redox reactions are fundamental to many processes in nature and technology, including photosynthesis, respiration, corrosion, and energy production in batteries and fuel cells. They are also important in many industrial processes, such as the production of metals, chemicals, and pharmaceuticals.

To know more abput redox reaction, visit:

https://brainly.com/question/13978139

#SPJ9

The value of H (in kJ) when 5.10 g of H2(g) is formed is 326 kJ (option B).

The given reaction is: CH3OH(I) —> CO(g)+2H2(g)

From the given value of H, we know that when one mole of CH3OH reacts, 128.1 kJ of heat energy is absorbed.

The molar mass of H2 is 2 g/mol. So, 5.10 g of H2 is equivalent to 5.10/2 = 2.55 moles of H2.

From the balanced equation, we can see that two moles of H2 are produced for each mole of CH3OH that reacts.

So, 2.55 moles of H2 are produced by 1.275 moles of CH3OH reacting (2.55/2).

Therefore, the amount of heat energy absorbed when 1.275 moles of CH3OH reacts can be calculated as:

Q = n x ΔH = 1.275 mol x 128.1 kJ/mol = 163.28 kJ

Since this amount of heat energy is absorbed when 1.275 moles of CH3OH reacts, to find the amount of heat energy absorbed when 2.55 moles of H2 is formed, we can simply double the value of Q:

Q = 2 x 163.28 kJ = 326.56 kJ

Learn more about  ΔH, here:

https://brainly.com/question/567211

#SPJ1

The amount of volume of KOH solution that should be added to make 500mL of a 0.300M solution is 200mL.

The volume of a solution given the concentration can be calculated using the following expression;

CaVa = CbVb

Where;

According to this question, we are to calculate how many mL of a 0.75 M OH solution that should be added to a 500 mL flask to make 500 mL of a 0.300 M KOH solution.

0.75 × Va = 500 × 0.3

0.75Va = 150

Va = 150/0.75

Va = 200mL

Learn more about volume at: https://brainly.com/question/14710169

#SPJ1