In the simulation, start with m1 = 200 kg and m, = 400 kg with their centers 8 meters apart. If you want to increase in the gravitational force between the two masses by the greatest amount, should you double the mass of m, or should you halve the distance sentences, explain which option would create the greater increase in the gravitational force and why. (2 points)

Answers

Answer 1

To double the gravitational force between the two blocks, double the mass of the blocks and keep the distance between constant.

The given parameters;

mass of the first block, m₁ = 200 kgmass of the second block, = 400 kgcenter mass of the blocks, r = 8 m

The gravitational force between the two mass is calculated by applying Newton's law of universal gravitation as follows;

[tex]F = \frac{Gm_1 m_2}{r^2}[/tex]

The magnitude of the gravitational force increases with increase in the mass of the blocks and decreases with increase in the distance between the blocks.

To double the gravitational force between the blocks, double the mass of the blocks;

[tex]F = \frac{G(2m_1)(2m_2)}{r^2} \\\\F = 2 \times \frac{Gm_1 m_2}{r^2}[/tex]

Thus, to double the gravitational force between the two blocks, double the mass of the blocks and keep the distance between constant.

Learn more here:https://brainly.com/question/10609143


Related Questions

Keeping in mind that not all flasks are vacuum, Please help me explain how other flasks prevent heat loss?​

Answers

The silver coating on the inner bottle prevents heat transfer by radiation, and the vacuum between its double wall prevents heat moving by convection. The thinness of the glass walls stops heat entering or leaving the flask by conduction.

What is resistanance?​

Answers

Answer:

Resistance is a measure of the oppostion to flow current in a electrical circuit

Explanation:

I hope it's help u army

how many times has the u.s. landed astronauts on the moon?

Answers

Answer:

six crewed landings

Explanation:

Please if someone knows the answer please tell me

Answers

Answer:

i think its electrostatic force

A ball was positioned in the middle of a smooth ramp and allowed to roll
downward. How does the total mechanical energy of the ball before it is
released compare to its total mechanical energy at the bottom of the ramp?
Assume there is no friction.

Answers

Answer:

These are all the forces acting on the ball: friction, gravity, and a normal force.

Explanation:

At the middle of the ramp their will be potential energy associated with the ball and the total  mechanical energy  will be equal to its potential energy  . At the bottom of the ramp their will be kinetic energy associated with the ball  and  total  mechanical energy  will be equal to its kinetic energy .

What is mechanical energy ?

Mechanical energy is the energy that is possessed by an object due to its motion or due to its position.

Total mechanical energy = potential energy + kinetic energy

When ball is positioned in the middle of the ramp , the ball is at rest , which implies that total mechanical energy is equal to   potential energy possessed by the ball and their is no kinetic energy at that instant of time , after that it came under the action of forces due to which it rolls down and its potential energy starts converting into kinetic energy and the total mechanical energy will be the sum of potential as well as kinetic energy  and when it reaches at the bottom of the ramp the total mechanical energy will be kinetic energy of the ball.

learn more about mechanical energy

https://brainly.com/question/12319302?referrer=searchResults

#SPJ2

A ray of light travelled from water into the air an angle of incidence of 30°. Calculate;
a) Its speed in water
b) angle of refraction in air. (Refractive index of water = 1.33)
c) Speed of light in air = 3.0 × 10⁸ m/s
hence calculate the critical angle of light in water.​

Answers

Answer:

speed = distance/time

just find the speed if it

Explain how energy changes in the spring toy below when it goes downstairs

Answers

Answer:

As a pendulum swings, its potential energy changes to kinetic energy, then back to potential energy, then back to kinetic energy, and so forth.

hope this helped<3

The one on the top is correct

The diagram below shows a pendulum in motion.

At what point(s) does the pendulum possess the least potential energy?
A. Points 1, 3, and 5 only
B. Points 2 and 4 only
C. Points 1 and 5 only
D. Point 3 only

Answers

Answer:

Potential Energy is given as:

P.E = mgh

which means P.E is directly proportional to height 'h'.

Kinetic Energy is given as:

K.E = (1/2)mv²

which means K.E is directly proportional to velocity 'v²'.

Total Energy of Pendulum = K.E + P.E

1. The pendulum has the most potential energy at extreme position because the height is maximum at the extreme position.

2. The pendulum has the least kinetic energy at extreme position because the velocity is zero at extreme position.

3. The pendulum has most kinetic energy at the mean position because the velocity is maximum at this point.

4. The pendulum has the least potential energy at the mean position because the height is minimum.

A rule to remember: The point where K.E is maximum, P.E is zero at this point and vice versa.Potential Energy is given as:

P.E = mgh

which means P.E is directly proportional to height 'h'.

Kinetic Energy is given as:

K.E = (1/2)mv²

which means K.E is directly proportional to velocity 'v²'.

Total Energy of Pendulum = K.E + P.E

1. The pendulum has the most potential energy at extreme position because the height is maximum at the extreme position.

2. The pendulum has the least kinetic energy at extreme position because the velocity is zero at extreme position.

3. The pendulum has most kinetic energy at the mean position because the velocity is maximum at this point.

4. The pendulum has the least potential energy at the mean position because the height is minimum.

A rule to remember: The point where K.E is maximum, P.E is zero at this point and vice versa.Potential Energy is given as:

P.E = mgh

which means P.E is directly proportional to height 'h'.

Kinetic Energy is given as:

K.E = (1/2)mv²

which means K.E is directly proportional to velocity 'v²'.

Total Energy of Pendulum = K.E + P.E

1. The pendulum has the most potential energy at extreme position because the height is maximum at the extreme position.

2. The pendulum has the least kinetic energy at extreme position because the velocity is zero at extreme position.

3. The pendulum has most kinetic energy at the mean position because the velocity is maximum at this point.

4. The pendulum has the least potential energy at the mean position because the height is minimum.

A rule to remember: The point where K.E is maximum, P.E is zero at this point and vice versa.

Explanation:

A 50,000 kg plane is flying at a constant velocity of 130 m/s. Is the plane in a state of equilibrium

Answers

Answer:

yes

Explanation:

Equilibrium means that all the forces acting upon the object are balanced. A cruising airplane has all four forces balanced, with no external forces acting on it. As a result it will remain in its motion at a constant velocity until an external force acts upon it

I am giving 100 points for you to answer 3 questions...
Question 1:
Research the fossil record of humpback whales and answer these questions:
Name at least two extinct species that share a close evolutionary relationship with humpback whales.
Explain the similarities and differences that exist between these species and humpback whales.
Is the fossil record complete for humpback whales? Explain your answer.

Question 2:
Explain scientifically whether humans and humpback whales share a close evolutionary relationship. Here are some ideas to consider as you structure your response:
Do they have any body structure similarities that suggest an evolutionary link?
How do scientists classify each organism? What is their kingdom, phylum, class order, and so on? Does this tell you anything about their evolutionary lineage?
Does their embryology hold any clue to their evolutionary relationship?

Question 3:
Conclude your research on humans and humpback whales by answering these questions:
What conclusion can you draw about the evolution of humans and humpback whales?
Did your research show that your original predictions were correct? Explain your answer.

Answers

Answer:

Two extinct species that share a close evoluntionary relationship with humpback whales are Dourdon and Basilosaurs. They had tailfins

No we do not have any body structure similarities to them. Scientist classify each organism by looking at their characteristics and their appearance. Yes it tells you something about the evoluntinary lineage becuase throw characteristics it can show how they have evolved

The conclusions that I can draw is that we do have some things common with humpback whales. Yes my original predictions were correct. They do have a common evoluntianry link as I stated in the beginning. I learned alot more than I knew at first about the similarties.

Explanation:

run me my points gimme 5 stars and a thanks. Why? cus i ran dem answers cmon now

Answer:

the person above me is right

Explanation:

If the absolute temperature of a gas is doubled and the pressure of the gas is doubled, how will the volume change

Answers

Answer: the volume quadruples

Explanation:

The density of aluminum is 2700 kg/m3. If transverse waves propagate at 34 m/s in a 4.6-mm diameter aluminum wire, what is the tension on the wire

Answers

Answer:

52N

Explanation:

v=SQRT(T/μ), μ=pA, A=πr^2

v=SQRT(T/pπr^2)

v^2=T/pπr^2

v^2*pπr^2=T

34^2*2700*π*0.0023^2=T

T=52N

The tension on the aluminum wire at the given density is 52.02 N.

Tension in the wire

The tension in the wire is calculated using the following formulas;

[tex]v = \sqrt{\frac{T}{\mu} }[/tex]

where;

v is speed of the sound waveT is the tension in the wireμ is mass per unit lengthArea of the aluminum wire

A = πd²/4

A = π x (4.6 x 10⁻³)²/4

A = 1.66 x 10⁻⁵ m²

Mass per unit length of the wire

μ = ρA

μ = 2700 kg/m³ x 1.66 x 10⁻⁵ m²

μ = 0.045 kg/m

Tension on the wire

[tex]34 = \sqrt{\frac{T}{0.045} } \\\\34^2 = \frac{T}{0.045}\\\\T = (34^2)(0.045)\\\\T = 52.02 \ N[/tex]

Thus, the tension on the aluminum wire at the given density is 52.02 N.

Learn more about tension on wire here: https://brainly.com/question/14336853

What is the relationship between kinetic energy and changing states of matter?

Answers

Answer:

The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.

Kinetic needs friction I think

when a wave moves through an opening in a barrier it

A.is reflected
B.bends and spreads out
C.Forms nodes and antinodes
D.speeds up​

Answers

B. Bends and spreads out ❗️❗️

A 76-kg water skier is being pulled by a nylon (Young's modulus 3.7 x 109 N/m2) tow rope that is attached to a boat. The unstretched length of the rope is 19 m and its cross-section area is 1.6 x 10-5 m2. As the skier moves, a resistive force (due to the water) of magnitude 140 N acts on her; this force is directed opposite to her motion. What is the change in length of the rope when the skier has an acceleration whose magnitude is 0.61 m/s2?

Answers

Newton's second law and the definition of Young's modulus allows us to find the change in length in the chord is:

Length change is:  ΔL = 5.98cm

Given parameters

Mass of the water skier m = 76 kg Young's modulus of chord Y = 3.7 10⁹ N / m² Chord length Lo = 19 m. The area of ​​the curda is a = 1.6 10-5 m² Friction force with water fr = 140 N. Acceleration a = 0.61 m / s²

To find

The change in length of the chord.

Newton's second law says that the net force on a body is directly proportional to its mass and acceleration.

           ∑ F = m a

where bold letters indicate vectors, F is force, m is mass, and acceleration.

A free-body diagram is a diagram of the forces without the details of the bodies, see attached.

          T-fr = m a

          T = ma + fr

Let's calculate.

          T = 76 0.61 + 140

          T = 186.36 N

Yung's modulus is defined by the relationship between stress and strain.

         

          [tex]Y = \frac{\frac{F}{A} }{\frac{\Delta L}{L_o} }[/tex]

           [tex]\Delta L = \frac{F}{A} \ \frac{L_o}{Y}[/tex]

Let's calculate.

 

         ΔL = [tex]\frac{186.36}{1.6 \ 10^{-5}} \ \frac{19}{3.7 \ 10^9}[/tex]  

         ΔL = 5.98 10⁻² m = 5.98 cm

In conclusion using Newton's second law and Young's modulus definition we can find the change in length in the chord is:

Length change is: ΔL = 5.98cm

Learn more about Young's Module here: brainly.com/question/13346614

It's not A. Please help.

Answers

Answer:

It represents double composition

A car starting from rest accelerates at a rate of 8m/s what is the final speed at the end of 4 seconds?

Answers

Answer:

vf = 32ms

Explanation:

v  =  u  +  a t ,

v  =  0  +  8.0  x  4.0  

v  =  32 ,

v  =  32 m /s  

Hope it Helps! :D  

What does NOT experience gravity?

Answers

Answer:

Astronauts who are orbiting the Earth often experience sensations of weightlessness. These sensations experienced by orbiting astronauts are the same sensations experienced by anyone who has been temporarily suspended above the seat on an amusement park ride. Not only are the sensations the same (for astronauts and roller coaster riders), but the causes of those sensations of weightlessness are also the same. Unfortunately however, many people have difficulty understanding the causes of weightlessness.

How much force is required to swing a 3 kg mass in a circle with a radius of 1.5 m at
a speed of 5 m/s?
F =ma.

Answers

The force is required to swing the mass in a circular path with the given radius and speed is 50 Newtons.

Given the data in the question;

Mass; [tex]m = 3kg[/tex]Radius; [tex]r = 1.5m[/tex]Speed; [tex]v = 5m/s[/tex]

Force; [tex]F =\ ?[/tex]

From the Newton's second law of motion:

[tex]F = ma[/tex]

Where F is force applied, m is mass and a is acceleration

Now force a circular motion Centripetal Acceleration is expressed as:

[tex]a_c = \frac{v^2}{r}[/tex]

Hence,  force is required to swing the mass in a circular path will be:

[tex]F = m * a_c\\\\F = m * \frac{v^2}{r}[/tex]

We substitute our given values into the equation;

[tex]F = 3kg * \frac{(5m/s)^2}{1.5m}\\\\F = 3kg * \frac{25m^2/s^2}{1.5m}\\\\F = 50 kgm/s^2\\\\F = 50N[/tex]

Therefore, force is required to swing the mass in a circular path with the given radius and speed is 50 Newtons.

Learn more: https://brainly.com/question/11577137

Why type of energy is present after a solar panel changes forms?

Answers

Explanation:

Solar technologies convert sunlight into electrical energy either through photovoltaic (PV) panels or through mirrors that concentrate solar radiation. This energy can be used to generate electricity or be stored in batteries or thermal storage.

Light and heat should be the type of energy


A race car travels on a straight racetrack with
a forward velocity of 44 m/s and slows at a
constant rate to a velocity of 22 m/s over 11 s.
How far does it move during this time?

Answers

Answer:968 m/s

Explanation:

If a race car travels on a straight racetrack with a forward velocity of 44 m/s and slows at a constant rate to a velocity of 22 m/s over 11 s, then the distance traveled by the race car would be 343 m.

What are the three equations of motion?

There are three equations of motion given by  Newton

The first equation is given as follows

v = u + at

the second equation is given as follows

S = ut + 1/2×a×t²

the third equation is given as follows

v² - u² = 2×a×s

As given in the problem Question a race car travels on a straight racetrack with a forward velocity of 44 m/s and slows at a constant rate to a velocity of 22 m/s over 11 s,

initial velocity = 22 m/s

final velocity =  44 m/s

time = 11 s

By using the first equation of motion,

v = u + at

44 = 22 + 11a

11a = 22

a = 2 m/s²

By using the second equation of motion,

S = ut + 1/2*a*t²

u= 22m/s , a= 2m/s² and t = 11seconds

S = 22*11 + 0.5*2*11²

S = 222+121

S= 343 m

Thus, the distance covered by the race car would be 343 m.

Learn more about equations of motion from here,

brainly.com/question/5955789

#SPJ2

In elementary school, 40% of girls and 25% of boys are unhappy with the shapes of their bodies. OA. True O B. False​

Answers

This is true

Jshshshdhddhdhje

Compare and contrast gravitational potential energy and elastic potential energy?

Answers

Answer:

The gravitational potential energy of an item is determined by its weight and height above the ground, whereas elastic potential energy is determined by the form of the object. When an elastic item is stretched or compressed, this occurs.

What is the smallest possible wavelength of light?

Answers

Explanation:

Blue or violet light has the shortest wavelength. White light is a combination of all colors in the color spectrum.

‼️ IN DESPERATE NEED OF HELP ‼️ i have a time limit of 20 minutes and i’m so lost, please help with a step-by-step explanation
The blue color of the sky results from the scattering of sunlight by air molecules. If the blue light of the sky
has a frequency of about 7.5 x 10“ Hz, what is the wavelength of this radiation (in m)?

Answers

0.00004

Explanation:

velocity of electromagnetic waves = 3.0×10^8.

Wavelength=velocity/frequency

(3.0×10^8) (7.5×10^12)

Electricity consumption in the United States totaled about ____________ kilowatthours (kWh) in 2015.

Answers

Answer:

3,900

Explanation:

How long would it take a bowling ball to fall (starting from rest)
from the top of the Leaning Tower of Pisa (58.36 meters)

Answers

That would depend on how much it weighs

what two factors affect how much gravitational potential energy an object-earth system has?

Answers

Answer:

height and mass

Explanation:

gpe = mass x height x gravitational field strength

please help ! Which of the following objects has the greatest momentum?

Answers

Answer:

maybe the third one....

1. State Newton's 3 laws of motion in your own words.

Answers

1st law INERTIA

2nd law (Force = mass x acceleration)

3rd law (all actions have opposite reaction)

Other Questions
w-23=84 dbgbgnfvbfghgbvcgvb g Please please help Ill give brainlyiest a $2400 deposit for 8 years compounded at annual interest rate of 4.5% what is the interest and the total value Joke whats a difference between a chicken and a chick An advertising objective is classified by its primary purpose, which is to inform, persuade, or ________. need help answering this thanks. Why did other countries want to defeat Napoleon? here is a easy question :- if -25/5 x p/q =1 , then p/q is equal to ? In Chicago, the temperature was -18F degrees in the morning.In the afternoon, the temperature dropped 8F degrees.What is the new temperature?A) OFB) -26FC) -3FD) 6F How many men did Santa Anna give General Urrea for his command? 500 1000 3000 6000 While traveling to India, Theo (a Canadian) is able to recognize the emotion of someone who is crying. This is possible because some emotions are ______. a. obvious b. specific c. universal d. local What is the difference between North Dakota and South Dakota? porque hacen rituales en el dia de muertos I need answer for this quick please What is the purpose of this passage? to explain who Marina and Marc are to link the authors families to sugar to explore the history of Guyana to show what sugar is used for. You treated yourself and a friend to sodas and snacks at a concert. The total was $16.75. You tipped 15%, and there was a sales tax of 6.5%. What was the total amount you paid? Answer these questions please it is worth 100 points Though the play Romeo and Juliet takes place hundreds of years in the past, there are some similarities between their friendship values and ours. What are these similarities? Explain your answer using examples from the play. If Bob has type AB blood and Anna has type O, what is the likelihood that they will have a child with type O blood She measure the length of the trees shadow ( on the ground) which was 42 meters. Then she positioned the ladder. Which was 2.4 meters high, and measured its shadow. The ladders shadow ( on the ground) was exactly 3 meters