In the context of variables and measurement scales, the magnitude of the differences between the numbers on the scale is meaningful in a(n) _____ scale.\

Answers

Answer 1

In the context of variables and measurement scales, the magnitude of the differences between the numbers on the scale is meaningful interval scale.

What is an interval scale?

It should be noted that an interval scale means a measurement where the difference between the variables is meaningful and equal.

In this case, in the context of variables and measurement scales, the magnitude of the differences between the numbers on the scale is meaningful interval scale.

Learn more about scale on:

brainly.com/question/16025911

#SPJ12


Related Questions

What type of facility has a frequency of 108.15 MHz?

Answers

ILS is a type of facility that has a frequency of 108.15 Megahertz.

What is an ILS?

ILS is an acronym for instrument landing system and it can be defined as a precision radio navigation system that is designed and developed to provide an aircraft (airplane) with short-range guidance, so as to enable it approach a runway during bad weather or at night.

Generally, ILS uses two main directional radio signals and these include:

The localizer: it uses a frequency of 108 to 112 MHz for horizontal guidance.The glideslope: it uses a frequency of 329.15 to 335 MHz for vertical guidance.

Read more on instrument landing system here: https://brainly.com/question/19091395

#SPJ12

NEED ANSWER ASAP!!! Angela has a bucket of mass 2 kg tied to a string. She places a drinking glass of mass 0.5 kg in the bucket. She spins the bucket in a vertical circle of radius 1.5 m. You want to find out how fast she must swing the bucket to keep the glass from falling out.

a. Draw the free-body diagram for the glass when it is at the top of the circle.

b. What is the equation for the net force on the glass at the top of the circle in terms of w, Fn, m, v, and r?

c. The glass will fall out of the bucket if the normal force between the glass and bucket equals zero. How fast must she spin the bucket to prevent this from happening?

d. The string will break if the tension on it is more than 100 N. Over what range of speeds can she keep the glass in the bucket and prevent the string from breaking?

Answers

a. The free-body diagram for the glass when it is at the top of the circle is attached below.

b. The equation for the net force on the glass at the top of the circle in terms of w, Fn, m, v, and r is mg x g + N -  mg x Vtop² /R =0

c. The glass will fall out of the bucket if the normal force between the glass and bucket equals zero. The speed with which she spin the bucket to prevent this from happening is 3.83 m/s.

d. The string will break if the tension on it is more than 100 N. The range of speeds can  prevent the string from breaking is 3.83< Vtop<4.99 m/s

What is Net force?

When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.

Given, Angela has a bucket of mass 2 kg tied to a string. She places a drinking glass of mass 0.5 kg in the bucket. She spins the bucket in a vertical circle of radius 1.5 m. She must swing the bucket to keep the glass from falling out.

a. The free body diagram of the bucket and glass is attached below.

b. Bucket will undergo centrifugal force

Fb = mVtop² /R

From the equilibrium of forces, we have

For bucket,

T +mb xg - N =  mb x Vtop² /R..............(1)

For glass,

mg x g + N =  mg x Vtop² /R..............(2)

Thus, this is the net force equation on the glass.

c. On adding both the equations. we have

T + (mb + mg) xg = (mb + mg) Vtop² /R

Substituting the values, T = 0 and from the question, we get

0 + (2+0.5) 9.81 = (2+0.5)(Vtop²/0.5)

Vtop = 3.83 m/s

Thus, the speed of spin to prevent glass from falling out is 3.83 m/s

d. The string will break if the tension on it is more than 100 N

100 + (2+0.5) 9.81 = (2+0.5)(Vtop²/0.5)

Vtop = 4.99 m/s

Thus, the range of velocity is  3.83< Vtop<4.99 m/s

Learn more about net force.

https://brainly.com/question/18031889

#SPJ1

Why is it important to have a closed circuit?

A. It prevents a circuit from working.
B. It prevents components from overheating.
C. It increases the resistance in the circuit.
D. It allows an electric current in the circuit.

Answers

D. It allows the flow of an electric current in the circuit.

Why is it important to have a closed circuit?

Closed circuit allows the flow of current in the circuit from the battery to the bulb. If the circuit is open then the current will not reach to the bulb or other appliances.

So we can conclude that It is important to have a closed circuit because it allows the flow of an electric current in the circuit.

Learn more about circuit here: https://brainly.com/question/2969220

#SPJ1

You should switch your headlights from high beam to low beam when a vehicle approaching from the opposite direction gets no closer than____ feet away from you.

Answers

You should switch your headlights from high beam to low beam when a vehicle approaching from the opposite direction gets no closer than 492.126 feet away from you.

What is a low beam?

Low beams, often known as dipped beams have a close-range focus. The most crucial and commonly utilized beam in an automobile is the low beam.

When a car coming from the other direction is no closer than 492.126 feet away from you, you should lower your headlights from high to low beam.

Hence, a vehicle approaching from the opposite direction gets no closer than 492.126 feet away from you.

To learn more about the low beam refer;

https://brainly.com/question/11531917

#SPJ1

What is the term for producing a current by moving a wire through a magnetic field?.

Answers

The answer is electromagnetic Induction.



I hope this answer will help you

A woman takes her dog rover for a walk on a leash. She pulls on the leash with a force of 30.0 N at an angle of 29° above the horizontal sidewalk. What force is tending to lift Rover vertically off the ground?
Please help I'm stuck.

Answers

19.8 N force is tending to lift Rover vertically off the ground.

What is horizontal and vertical component?

The horizontal velocity component ([tex]v_{x}[/tex]) describes the influence of the velocity in displacing the projectile horizontally. The vertical velocity component ([tex]v_{y}[/tex]) describes the influence of the velocity in displacing the projectile vertically.

According to the question,

The women pulls the dog with a force of 30 N at an angle of  29° from the horizontal.

Horizontal component=  30cos(29°) = 22.2 N

Vertical component = 30sin(29°) = 19.8 N

Therefore,

The horizontal component would tend to make the dog move forward and the vertical component would tend lift it off the ground.

Hence,

19.8 N force is tending to lift Rover vertically off the ground.

Learn more about horizontal and vertical component here:

https://brainly.com/question/11776718

#SPJ1

A car accelerates from a standstill to 60 km/hr in 10.0 seconds. What is its acceleration?

Answers

The acceleration of the car is 1.66 m per sec square.

How to calculate acceleration?

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is accelerating.

Initial velocity=0

Final velocity= 60km/hr

To convert it into m/sec

1 km=1000 m

1 hr=3600 sec

So= (60×1000)÷3600=16.66 m/sec

time=10 sec

We know that acceleration is the rate of change of velocity per unit of time.

acceleration=(final velocity-initial velocity)÷ time taken

                     = (16.66-0)÷10

                     = 1.66 m per sec square

So, Acceleration will be, 1.66 m per sec square

For more details on acceleration refer to:

brainly.com/question/2437624

#SPJ10

What is the change of state when magma crystallises to form igneous rock?

Answers

Answer:

liquid

Explanation:

due to high temperatures in the magma chamber all solids liquidify on reaching the surface with colder temperatures it now solidify to form igneous rock

The actual mass of a sheet of copy paper is 4.5 g. What must be the actual mass of a 1 cm² plece of copy paper?
Show your calculations.

Answers

The mass of 1 cm² piece of copy paper is 0.0072 g.

What is the area of a piece of paper?

Assuming the dimensions of a piece of paper is 21.0 x 29.7 cm

The area of the piece of paper = 21.0 * 29.7 = 623.7 cm²

Mass of 623.7 cm² = 4.5 g

Mass of 1 cm² piece of copy paper = 4.5/623.7 cm² = 0.0072 g

Therefore, the mass of 1 cm² piece of copy paper is 0.0072 g.

Learn more about area at: https://brainly.com/question/25965491

#SPJ1

2. A kg of iron and a kilo of lead, both at 1000 degrees Celsius, are kept on ice. It is discovered after some time that the iron has melted more ice than the lead. Why? 2 A vonal containing un or in kont in on oron The tomis motor an hoot​

Answers

The specific heat capacity of iron is greater than that of lead hence the iron will melt the ice more than the lead.

What is the specific heat capacity?

The specific heat capacity refers to the amount of heat that is required to raise the temperature of 1Kg of a body by 1 K.

We know that the specific heat capacity of iron is greater than that of lead hence the iron will melt the ice more than the lead.

Learn more about heat capacity:https://brainly.com/question/13499849

#SPJ1

Pls help me i have to submit this due tomorrow :'D

Answers

[tex]\textsf {a) As there is no change in the initial and final positions, the displacement is}\\\textsf {equal to 0.}[/tex]

b) Finding total distance :

Distance travelled from 0 s to 5 s :

1/2 x 5 x 30 = 75 m

Distance travelled from 5 s to 10 s :

5 x 30 = 150 m

Distance travelled from 10 s to 15 s :

150 + 1/2 x 5 x 5150 + 12.5 = 162.5 m

Distance travelled from 15 s to 20 s :

36 x 5 + 1/2 x 5 x 4180 + 10 = 190 m

Distance travelled from 20 s to 25 s :

45 x 5 + 1/2 x 5 x 5225 + 12.5 = 237.5 m

Distance travelled from 25 s to 30 s :

40 x 5 + 1/2 x 10 x 5200 + 25 = 225 m

Distance travelled from 30 s to 35 s :

20 x 5 + 1/2 x 20 x 5100 + 50 = 150 m

Distance travelled from 35 s to 40 s :

1/2 x 20 x 550 m

Total = 75 + 150 + 162.5 + 190 + 237.5 + 225 + 150 + 50

Total = 1240 m

c) velocity at t = 15 s

36/1512/52.4 m/s

d) average velocity

0 m/s (as displacement is equal to 0)

e) average speed

1240/4031 m/s

f) Part d uses displacement whereas part e uses distance

Henry shot a down tennis ball and a cricket ball of the same size to window glass. Which one will have more impact? Justify.​

Answers

Answer: The cricket ball bc of the material

Explanation:

You are trying to measure the mass of several different objects when you realize that there is a large wad of gum stuck to the underside of the balance pan. Removing the gum will improve the __________ of your measurements.

Answers

Answer:

accuracy

Explanation:

You are trying to measure the mass of several different objects when you realize that there is a large wad of gum stuck to the underside of the balance pan. Removing the gum will improve the accuracy of your measurements.

4. T or F X-rays, ultraviolet light, and gamma rays all can travel through interplanetary space, so they are examples of waves.
5. What happens to the amplitude of water waves as you get farther from the disturbance that caused them? Why?

Answers

4. The X-rays, ultraviolet light, and gamma rays all can travel through interplanetary space, so they are examples of waves is a False.

5. The amplitude of water waves as you get farther from the disturbance that caused them decreases.

What is electromagnetic spectrum?

The electromagnetic spectrum consists of the range of all types of EM radiation. Radiation is packet of energy that travels and spreads out. It has radio waves, infrared waves, visible light waves, ultraviolet rays and microwaves.

They possess high energy even to penetrate deep within the material. The electromagnetic spectrum has longer wavelength and less frequency.

4. The Earth's environment is thick an adequate number of that for all intents and purposes no X-beams can come through from space the entire way to the Earth's surface. This is great as far as we're concerned yet in addition terrible for stargazing. We need to put X-beam telescopes and identifiers on satellites.

Thus, X-rays, ultraviolet light, and gamma rays all can travel through interplanetary space, so they are examples of wave is a False statement.

5. The amplitude of the wave decreases as the time period increases. But when we get far from the disturbance, the amplitude increases.

Thus, the amplitude of water wave increases as we get farther from the disturbance.

Learn more about electromagnetic spectrum.

https://brainly.com/question/23727978

#SPJ1

This state that the work done on a body by a net force is equal to the change is kinetic energy of the body

Answers

Answer:

that's true The work-energy theorem states that

Calculate the mass of an object whose weight is 400n and accleration due to gravity is 10 m/ s

Answers

Answer:

40kg

Explanation:

w=m×

w=400n

g=10

m=?

400/10=m×10/10

m=40

Find the maximum energy stored in the spring bumpers

Answers

The maximum energy stored in the spring bumpers is given as ¹/₂kx².

Maximum energy stored in a spring

The maximum energy stored in a spring is given by the following equations;

E = ¹/₂kx²

where;

E is the energy stored in the springk is spring constantx is extension of the spring

Thus, the maximum energy stored in the spring bumpers is given as ¹/₂kx².

Learn more about energy stored in spring here: https://brainly.com/question/20762015

#SPJ12

a cyclist applies a constant forward force of 20 N to maintain a velocity 2.5 m/s. how much power does the cyclist deliver?

Answers

The power exerted by the cyclist is determined as 50 W.

Average power exerted by the cyclist

The power exerted by the cyclist is calculated as follows;

P = FV

where;

F is the applied forceV is velocity

P = 20 x 2.5

P = 50 W

Thus, the power exerted by the cyclist is determined as 50 W.

Learn more about power here: https://brainly.com/question/25263760

#SPJ1

Science question! helppppp

Answers

Let's take this problem step-by-step:

What does this problem want to solve:

 ⇒ find two pendulums that will swing back and forth in the least amount

     of time

Therefore:

 ⇒ must find the equation that calculates that period or swing time of a

     pendulum

     Equation: [tex]T = 2\pi \sqrt{\frac{L}{g} }[/tex]

L: length of the pendulumg: gravitational acceleration

Based on the equation:

  ⇒ the longer the string is ⇒ the greater the swing time

Thus:

 ⇒ pendulum Y and Z will have the least amount of swing time

Answer: (B)

Hope that helps!

#LearnwithBrainly


a A load of 1000 N can be lifted by applying
the force) effort of 250 N.If the load
arm is 25 cm, calculate the effort arm.

Answers

Answer:

Explanation:

[tex]\text{Since the fulcrum lies in between the load and effort, it is class I lever.}[/tex]

[tex]\text{Mechanical advantage (M.A.) of levers is given by,}[/tex]

[tex]\text{M.A.=effort armload arm=50cm,10cm}[/tex]

[tex]\text{Thus, mechanical advantage , M.A. = 5.}[/tex]

[tex]\text{Given, effort (E)=10N, Load(L)=?}[/tex]

∴ [tex]L=E \times M.A.[/tex]

[tex]=10\times5=50N[/tex]

Answer:

[tex]\fbox {100 cm}[/tex]

Explanation:

Finding Mechanical Advantage :

MA = Load / Effort

MA = 1000/250

MA = 4

Finding length of effort arm :

Load arm = Effort arm / 4

Effort arm = 25 cm x 4

Effort arm = 100 cm

Who is responsible of refraction light 1/3 in eye

Answers

The cornea is  responsible of refraction light 1/3 in eye.

What is the function of the cornea?

In addition to the protective function, it plays a fundamental role in the formation of vision. Transparent, it works like a lens over the iris, focusing light from the pupil towards the retina.

Normally, the cornea and lens deflect (refract) incoming light rays, focusing them on the retina. The shape of the cornea is fixed, but the lens changes shape to focus on objects at different distances from the eye.

See more about cornea at brainly.com/question/2297282

#SPJ12

A passenger is running inside a stationary train with some speed and looks at the person standing on the platform. Describe the motion of the person standing on the platform with respect to the running passenger.

Answers

Answer:

Doppler effect

Explanation:

this means that at one point when the person running is close to the observer it will appear to run fast but slower as he moves away from the observer

A passenger is running inside a stationary train at some speed and looks at the person standing on the platform, then the person standing on the platform seems to be moving backward relative to the person running inside the stationary train because of the concept of relative velocity.

What is Velocity?

The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.

A passenger is going inside a stationary train at a certain pace when they look at the person standing on the platform, and because of the idea of relative velocity,

The person on the platform appears to be moving backward in relation to the passenger moving inside the stationary train.

By observing from the side of the person standing on the platform the person running inside the stationary train would appear to move in the forward direction because of the relative velocity.

Learn more about Velocity from here

brainly.com/question/18084516

#SPJ2

The ball is in contact with the bat for 0.001s use the equation in the box to caluclate the force exerted by the bat on the ball

Answers

Answer:

Force = 9600N

Explanation:

If this is the right question, there should have been a question before about the what the change in the momentum of the ball was. The answer to that was 9.6kg m/s. For this part, we divide this by the time taken which was 0.001s which give us the resultant force.

resultant force = change in momentum ÷ time

= 9.6kgm/s ÷ 0.001s

= 9600N

ons: READ each question below and ANSWER each part of the question.
Questions:
1. Ms. Woodard walks 1 m between each desk in her classroom. She walks
from desk 1 to desk 3, from desk 3 to desk 4, and finally from desk 4 back to
desk 2.
a. DRAW Ms. Woodard's path to all the desks here:
a.
a.
What DISTANCE has Ms. Woodard traveled? CONVERT (change) your answer to
millimeters.
What is Ms. Woodard's DISPLACEMENT?

Answers

Ms. Woodard has traveled a distance of 5 m.

Ms. Woodard's displacement is 1 m.

Newton's second law of motion states that Choose one: A. the force of gravity is proportional to the masses of the two objects and the inverse of the square of the distance. B. the acceleration of an object is proportional to the net force acting on it. C. objects have inertia. D. every action has an equal and opposite reaction.

Answers

Answer:

B

Explanation:

Which statement about polymers is true?

Options below:

-Polymers are substances that have relatively large molecules.
-Oil and gas are the starting materials for making all polymers.
-Fabrics such as cotton and silk are synthetic polymers.
-All polymers are obtained from living organisms.

Answers

Answer:

a

Explanation:

Polymers are large molecules which form long chains

Answer: A. Polymers are substances that have relatively large molecules.

Explanation:

Select the correct answer.

Which statement about polymers is true?

A. Polymers are substances that have relatively large molecules.

B. Oil and gas are the starting materials for making all polymers.

C. Fabrics such as cotton and silk are synthetic polymers.

D. All polymers are obtained from living organisms.

what is periscope ? where it is used?​

Answers

Explanation:

The periscope is used in the submarines to see what is going on the water surface.

It is also used in some gun turrets and it is used in armed vehicles.

✨Hope it helps.✨

A periscope is an object/tool used to see things that are not in direct line of sight, and to be able to see while staying behind cover. For example, in a tank, a submarine, or behind armor.

What does that mean about the densities of the phases of water?

The solid state is the most dense, followed by the liquid state, then the gas state.
The solid state is more dense than the liquid state.
The liquid state is more dense than the solid state.
The gas state is the most dense, followed by the liquid state, then the solid state

Answers

The correct option is 2. The solid state is more dense than the liquid state.

The solid form of most substances is denser than the liquid phase so a block of most solids will sink in the liquid but a block of ice floats in liquid water because ice is less dense. Upon freezing the density of water decreases by about 9%. This is due to cooling of intermolecular vibrations allowing the molecules to form steady hydrogen bonds and locking into positions of hexagonal packing upon freezing to ice. These bonds are shorter in the crystal than in the liquid.

Learn more about densities of the phases of water here. https://brainly.com/question/12292208

#SPJ10

In which of the three states of matter do the particles transfer significant amounts of energy by both conduction and convection?

Answers

In the gaseous state,  particles transfer significant amounts of energy by both conduction and convection.

What is convection?

The term convection refers to a pattern of heat transfer in which there is the movement of a significant amount of matter. In convection, the particles of a fluid are moved from one point to another.

Thus, in the gaseous state,  particles transfer significant amounts of energy by both conduction and convection.

Learn more about convection:https://brainly.com/question/16635311?

#SPJ1

Calculate magnetic field strength current 3a flows in wire 2.5m and produces a force 15n

Answers

The magnetic field strength willl be 2 T. A force known as the Lorentz force acts on the charge when it is subject to an electric and magnetic field.

What is Lorentz force?

Lorentz force is defined as the force acting on point charge when it is moving in an electric and magnetic field.

The given data in the problem is ;

B is the magnetic field strength =? T.

Current, I =?

L is the length of the wire

The magnetic force is found as;

F= BIL

15 N  = B × 3 A ×  2.5 m

B = 2 T

Hence, the magnetic field strength willl be 2 T.

To learn more about the Lorentz force refer to the link;

https://brainly.com/question/13791875

#SPJ1

Other Questions
curved surface area of a cone = Trl, where r is theradius and is the slant height.The ice cream cone below is made from a piece of wafer.Work out the area of wafer required to make the icecream cone.Give your answer to 1 d.p.2 cm9 cm state whether or not the relation is considered a function? Which of the following is not one of the benefits of stretching before aworkout?A. It develops general flexibility.B. It develops the muscles.C. It helps regulate breathing.D. It prevents the muscles from tightening during exercise. Given the function f(x) = 5x2 x + 20, find f(3). Write the half reaction equations at the cathode and anode What determines how much of each good and service should be supplied in capitalist theory? The invisible hand of the market Central planners coordinating with the government The unions and guilds Elected leaders setting quotas 10 Points!!! A cheese is in the shape of right prism with a triangular base and its dimensions are as shown. What is the approximate surface area of this prism?A. 72 cm B. 79.8 cm C. 82 cm D.87.4 cm definition of Identity property, Association property and communicative property please answer! 12. For which of the following quadratic equations are the roots 2 and 57O A. x-3x - 10=0B. x - 11x 10 = 0c. x - 7x + 10 = 0D. x + 7x-10=0OOO Supply and den and coordinate to determine prices by workingO together.O competitively.with other factors.Oseparately. At which point does the author develop the conflict between the people of Phippsburg and those of Malaga Island in Lizzie Bright and the Buckminster Boy?before Turner travels to the islandafter Turner travels to the islandbefore Turner meets Lizzie Brightwhen Turner is eating with Lizzies family Which sentence uses parallel structure? ... 5 sentences of probable condition ( 3 positive 2 negative If you have too many tasks to complete at work, you shouldA. take a deep breath and start at the top of the pile and work your way down as quickly as possible.B. complain to your boss that it's an unreasonable amount of work.C. decide for yourself what is the most important, then get started.D. ask your boss to prioritize assignments. Explain why billing Medicare Part A for the listed service is or is not correct.Summarize the types of services Medicare Part A reimburses.Discuss the type of services Medicare Part B covers. What can an author use to give the reader more information about acharacter?OA. Information about the character's social statusB. Information about how a story's central conflict will be resolvedOC. Information about events in a story that are trueOD. Information about the author's previous worksSUBMIT Responsible behavior should be based on ______ and motivated by a will to injury to _______ self and others. parts of speech of an Which of the following are solutions to the equation below?Check all that apply.(3x - 5) = 19A. X=14B. X= -19+5 C. x= -19 +53 D. X = 19 +53DEX=14OF X= 19+ what is the answer I need this to pass