.if you dilute 0.20 l of a 3.5 m solution of lici to 0.90 l, determine the new concentration of the
solution.

The phrase "the molarity of a solution" refers to the concentration of a solution and is defined as the number of moles of solute dissolved in one liter of solution. It is denoted by the symbol "M" and has units of moles per liter (mol/L).

Molarity is a commonly used unit of concentration in chemistry and is particularly useful in stoichiometry calculations, as it allows for the conversion of the volume of a solution to the number of moles of solute present.

For example, a solution with a molarity of 0.1 M contains 0.1 moles of solute per liter of solution. If the volume of the solution is known, it is possible to calculate the number of moles of solute present and use this information to determine other important parameters, such as the mass of the solute or the volume of another solution required for a reaction.

To know more about Molarity refer to-

https://brainly.com/question/8732513

#SPJ11

the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.

The solubility of Ni(OH)2 depends on the pH of the solution because it can undergo acid-base reactions according to the following equilibrium:

Ni(OH)2(s) + 2 H2O(l) ⇌ Ni(OH)2(aq) + 2 OH^-(aq)

1. At pH 8.0, the solution is slightly basic, so we can assume that the hydroxide ion concentration is 10^-6 M.

The solubility product expression for Ni(OH)2 is:

Ksp = [Ni2+][OH^-]^2

Since the solution is buffered at pH 8.0, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

Therefore, [OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

2. At pH 10.3, the hydroxide ion concentration is 10^-4.7 M.

[OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The excess hydroxide ion concentration is:

[OH^-] - 10^-4.7 M = -7.6×10^-6 M

Since the excess hydroxide ion concentration is small compared to the total concentration of OH^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

3. At pH 11.9, the hydroxide ion concentration is 10^-3.1 M.

[OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The excess hydroxide ion concentration is:

[OH^-] - 10^-3.1 M = -9.9×10^-6 M

Since the excess hydroxide ion concentration is small compared to the total concentration of OH
^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

Therefore, the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.
Visit to know more about solubility:-

https://brainly.com/question/23946616

#SPJ11

According to the question 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.

STP (Standard Temperature and Pressure) is an important concept in the physical sciences. It is the reference state for temperature and pressure in which most measurements are made. In chemistry, STP is used as a reference state for calculating the physical properties of various substances. It is also used in thermodynamics to calculate the physical state of a system. STP is defined as 0 °C (273.15 K) and a pressure of 1 atmosphere (101.325 kPa).

According to the balanced equation, for every 6 moles of NO, 5 moles of NH3 is required. Therefore, we need to calculate the number of moles of NO first.

1 mole of gas at STP occupies 22. 4 liters, so 30.0 liters of NO at STP is equal to 30.0/22.4 = 1.34 moles of NO.

Since we need 5 moles of NH3 for every 6 moles of NO, we need 5/6 x 1.34 = 1.12 moles of NH3.

At 32.6°C and 4.25 kPa, 1 mole of NH3 occupies 17.1 liters, so 1.12 moles of NH3 is equal to 1.12 x 17.1 = 19.2 liters of NH3.

Therefore, 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.

To learn more about STP

https://brainly.com/question/27100414

#SPJ4

The pH of the solution is 1.30

To determine the pH of a solution, the formula:

pH = -log[H3O+]

Given a concentration of H3O+ in the solution as 0.050 M, substituting this value into the formula yields:

pH = -log(0.050)

By evaluating this expression using a calculator, the pH is found to be 1.30. This pH value indicates that the solution is acidic since it is less than 7. The pH scale is logarithmic, meaning that each unit change in pH corresponds to a tenfold change in the acidity or basicity of the solution. Consequently, a solution with a pH of 1 is ten times more acidic than a solution with a pH of 2, and a hundred times more acidic than a solution with a pH of 3, and so forth.

Therefore, a pH of 1.30 denotes a moderately acidic solution.

Know more about pH here:

https://brainly.com/question/2288405

#SPJ11

The explanations aq and g are the ones that accurately explain the chemical equation. The appropriate choices are thus C. (so), solid

D. (l), liters

Symbols serve the following four purposes: Motivating others to take action via emotion; socially uniting groups by fostering a sense of common identity and values Clarification and revelation - show insight and clarity into the divine. Communication - conveying emotional components of an event.

The product and reactant symbols have been used to represent the chemical equation. The moles of an element that underwent a reaction are contained in the chemical equation. Prior to the compound, the moles were written as the coefficient.

learn more about chemical equations

brainly.com/question/21049751

#SPJ1

By mixing toilet bowl cleaner and bleach, a chemical reaction occurs, which releases a potentially toxic gas: chlorine gas. Chlorine gas can cause irritation to the eyes, nose, and throat, as well as difficulty breathing, coughing, and wheezing. The correct answer is 2.

Inhaling high levels of chlorine gas can even lead to chest pain, vomiting, and death. It is important to always read and follow the labels on household cleaning products and never mix different products together, especially those containing bleach and acids. If you accidentally mix these products and experience symptoms of chlorine gas exposure, seek fresh air and medical attention immediately. Hence option 2 is correct.

To know more about Chlorine gas , here

brainly.com/question/14748176

#SPJ1

a) The ionization reaction of nitric acid (HNO₃) with water can be written in two different ways:

HNO₃ + H₂O → H₃O⁺ + NO₃⁻

or

HNO₃ + H₂O ⇌ H⁺ + NO₃⁻ + H₂O

Both equations are balanced.

b) The two expressions for the acid dissociation constant (Ka) can be derived from the two equations above:

Ka = [H₃O⁺][NO₃⁻] / [HNO₃]

or

Ka = [H⁺][NO₃⁻] / [HNO₃]

c) Nitric acid is a strong acid, meaning that it fully dissociates in water. As a result, the concentration of HNO3 in the equation is very low, making the Ka value very large. In fact, the Ka value for nitric acid is around 24, which is significantly higher than the Ka values for weak acids. This indicates that nitric acid is a very strong acid.

Let us learn more about this.

a) Ionization reaction - The ionization reaction refers to the process in which a molecule or compound dissociates into ions when it comes into contact with a solvent such as water. In the case of nitric acid (HNO₃), when it is added to water, it ionizes to produce hydronium ions (H₃O⁺) and nitrate ions (NO₃⁻), which is represented by the following balanced equation: HNO₃ + H₂O -> H₃O⁺ + NO₃⁻

b) Ka - To define Ka, we need to first understand that it is the equilibrium constant for the ionization reaction, which indicates the strength of an acid. Specifically, Ka measures the extent to which an acid dissociates in water, which can be expressed as the following two equations: Ka = [H₃O⁺][NO₃⁻]/[HNO₃] Ka = [H⁺][NO₃⁻]/[HNO₃] where [H₃O⁺] and [H⁺] represent the concentration of hydronium ions, and [NO₃⁻] and [HNO₃] represent the concentration of nitrate ions and nitric acid, respectively.

c) As nitric acid is a strong acid, it dissociates completely in water, meaning that the concentration of H₃O⁺ and NO₃⁻ ions will be high compared to the concentration of undissociated HNO₃. Therefore, the value of Ka for this reaction will be very large, indicating that nitric acid is a strong acid with a high degree of ionization.

Learn more about Ka at https://brainly.com/question/31432380

#SPJ11

The reaction Zn + 2HCl → ZnCl2 + H2 involves the oxidation of zinc (Zn) to zinc chloride (ZnCl2) and the reduction of hydrogen ions (H+) to hydrogen gas (H2). In this reaction, zinc loses electrons, which is known as oxidation, while hydrogen ions gain electrons, which is known as reduction.

The balanced half-reactions describing these processes are:

Oxidation half-reaction: Zn → Zn2+ + 2e-

Reduction half-reaction: 2H+ + 2e- → H2

In the oxidation half-reaction, zinc atoms lose two electrons each and are oxidized to Zn2+ ions. These electrons are then transferred to the hydrogen ions in the reduction half-reaction, where they are used to reduce H+ ions to form H2 gas. Overall, the two half-reactions combine to form the balanced equation:

Zn + 2HCl → ZnCl2 + H2

It is important to note that oxidation and reduction always occur together in a redox reaction, and the transfer of electrons is what drives the reaction. In the case of ZnCl2 formation, the reaction is driven by the transfer of electrons from the zinc atoms to the hydrogen ions.

To know more about zinc chloride, visit:

https://brainly.com/question/26385253#

#SPJ11

Converting mass to moles ccc requires knowing the molar mass of the substance and using it to divide the given mass to find the number of moles

Moles ccc is a unit used to measure the amount of substance, particularly in chemistry. It is defined as the number of atoms, molecules, or ions in 12 grams of pure carbon-12. One mole of any substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23.

To convert mass to moles on the ccc scale, you need to know the molar mass of the substance. Molar mass is the mass of one mole of a substance, expressed in grams per mole. To find the number of moles of a substance, you divide the given mass by its molar mass.

For example, the table given shows how many moles are in 6 grams of four elements: oxygen, sulfur, sodium, and iron. To find the number of moles of oxygen, you divide 6 grams by its molar mass, which is 16 grams per mole. This gives you 0.375 moles of oxygen.

The equation given shows how to use carbon molar mass to find the moles of carbon. The molar mass of carbon is 12 grams per mole. Therefore, if you have a sample of carbon with a mass of 24 grams, you can find the number of moles by dividing 24 grams by 12 grams per mole, which equals 2 moles of carbon.

In summary, converting mass to moles ccc requires knowing the molar mass of the substance and using it to divide the given mass to find the number of moles. The moles ccc scale is a useful unit for measuring the amount of substance in chemistry.

To know more about mass, visit:

https://brainly.com/question/19694949#

#SPJ11

Weather forecasting has substantially improved thanks to technical and data analytic advancements, but there are still a lot of intricate and dynamic aspects that can influence weather patterns, such as changes in air pressure, temperature, and humidity.

It is challenging to forecast a storm's precise trajectory and strength due to the possibility of unforeseen events and anomalies. The effects of catastrophic weather occurrences can be mitigated and forecasting accuracy can be increased with the help of ongoing technical and scientific developments.

In addition to forecasting technologies, infrastructure should be resilient to the effects of powerful storms and early warning systems that can alert people to approaching danger from severe weather should be available.

Not all countries have the financial means to support the development and application of these technologies. It is morally right for developed countries to help less developed ones obtain this technology.

Learn more about weather forecast:brainly.com/question/31456817

#SPJ1

The volume of the gas at 2.00 atm and 200.0 K is 18.75 L.

We can use the combined to solve this problem:

(P1 * V1) / (T1) = (P2 * V2) / (T2)

where P is pressure, V is volume, and T is temperature.

Plugging in the given values:

(0.250 atm * 300 L) / (400.0 K) = (2.00 atm * V2) / (200.0 K)

Simplifying:

V2 = (0.250 atm * 300 L * 200.0 K) / (2.00 atm * 400.0 K)

V2 = 18.75 L

Therefore, the volume of the gas at 2.00 atm and 200.0 K is 18.75 L.

Gas laws refer to a set of principles that describe the behavior of gases under different conditions, including pressure, temperature, and volume.

There are several gas laws, including Boyle's law, Charles's law, Gay-Lussac's law, and the ideal gas law.

To know more about combined gas law refer to-

https://brainly.com/question/30458409

#SPJ11

The subscript numbers in covalent compounds can be determined by the prefixes used in the written name of the compound.

Covalent compounds are formed by the sharing of electrons between atoms, and their names are derived from the prefixes used to indicate the number of each type of atom in the compound.

The prefix indicates the number of atoms of each element, and the second element is given an "-ide" ending. For example, carbon dioxide has one carbon atom and two oxygen atoms, and is written as CO₂. The prefix "di" indicates two atoms of oxygen, and the subscript "2" indicates that there are two oxygen atoms.

Similarly, dinitrogen trioxide has two nitrogen atoms and three oxygen atoms, and is written as N₂O₃. The prefix "di" indicates two nitrogen atoms, and the prefix "tri" indicates three oxygen atoms, thus leading to the correct subscript numbers.

To know more about Covalent compounds, refer here:

https://brainly.com/question/11632372#

#SPJ11

In the reaction of the oxidation of chromium, 4 chromium atoms each lose 3 electrons to become positively charged ions, and 3 oxygen molecules each gain 4 electrons to become negatively charged ions. This means that a total of 12 electrons are transferred in the oxidation of chromium.

The oxidation of chromium can be broken down into two half-reactions:

1) The oxidation of chromium:
4Cr(s) --> 4Cr³⁺(aq) + 12e-

In this half-reaction, each

chromium atom loses 3 electrons to become a positively charged ion (Cr³⁺), and a total of 12 electrons are

transferred

.

2) The reduction of oxygen:
3O₂(g) + 12e- --> 6O²⁻(aq)

In this half-reaction, each oxygen molecule gains 4 electrons to become a negatively charged ion (O²⁻), and a total of 12 electrons are transferred.

Therefore, the total number of electrons transferred during the reaction of the oxidation of chromium is 12. It is important to note that this reaction involves the transfer of O₂ electrons, not O₄ electrons.

Learn more about "oxidation of chromium" https://brainly.com/question/31860895 #SPJ11

The amount of work done on the system is 34 J and the final positive sign means that this work corresponds to an increase in internal energy of the gas.

Thermodynamic work is called the transfer of energy between the system and the environment by methods that do not depend on the difference in temperatures between the two. When a system is compressed or expanded, a thermodynamic work is produced which is called pressure-volume work (p - v).

The pressure-volume work done by a system that compresses or expands at constant pressure is given by the expression:

W system= -p∆V

W system: Work exchanged by the system with the environment. Its unit of measure in the International System is the joule (J)

p: Pressure. Its unit of measurement in the International System is the pascal (Pa)

∆V: Volume variation (∆V = Vf - Vi). Its unit of measurement in the International System is cubic meter (m³)

In this case:

p= 0.400 atm

ΔV=(185-100)ml = 85 ml

W system=  0.400 atm× 85 ml =34 J

The amount of work done on the system is 34 J and the final positive sign means that this work corresponds to an increase in internal energy of the gas.

To know more about work done here

https://brainly.com/question/24278738

#SPJ4

The mass of solute in a 500mL solution of 0.200 M Sodium Phosphate is approximately 16.394 grams.

To find the mass of solute in a 500mL solution of 0.200 M Sodium Phosphate, we can follow these steps:

1. Identify the molar concentration (M) of the solution, which is given as 0.200 M.
2. Convert the volume of the solution from mL to L: 500mL = 0.500L.
3. Calculate the moles of solute (Sodium Phosphate) using the formula: moles = Molarity × Volume. So, moles = 0.200 M × 0.500 L = 0.100 moles.
4. Find the molar mass of Sodium Phosphate (Na3PO4). The molar mass of Na is 22.99 g/mol, P is 30.97 g/mol, and O is 16.00 g/mol. Therefore, the molar mass of Na3PO4 is (3 × 22.99) + 30.97 + (4 × 16.00) = 163.94 g/mol.
5. Finally, calculate the mass of solute using the formula: mass = moles × molar mass. So, mass = 0.100 moles × 163.94 g/mol = 16.394 g.

In summary, the mass of solute in a 500mL solution of 0.200 M Sodium Phosphate is approximately 16.394 grams.

To know more about Sodium Phosphate, visit:

https://brainly.com/question/10559079#

#SPJ11

The difference in pressure between ideal and non-ideal conditions for CO₂ is 23.42 atm.

To find the difference in pressure between ideal and non-ideal conditions for CO₂, we need to use the van der Waals equation:

(P + a(n/V)²)(V - nb) = nRT

where P is the pressure, n is the number of moles, V is the volume, T is the temperature, R is the gas constant, a is a constant related to the attractive forces between molecules, and b is a constant related to the volume of the molecules.

First, we need to calculate the volume of the CO₂ molecules using the given values of n and V:

V/n = V/2.0 mol = 7.30 L/2.0 mol = 3.65 L/mol

Next, we can plug in the given values of a, b, n, V, and T into the van der Waals equation:

(P + a(n/V)²)(V - nb) = nRT

(4.50 atm + 3.59 L²･atm/mol²(2.0 mol/3.65 L)²)(7.30 L - 0.0427 L/mol × 2.0 mol) = 2.0 mol × 0.0821 L･atm/mol･K × 200.0 K

Simplifying the equation, we get:

(4.50 + 3.59(2.0/3.65)²)(7.30 - 0.0427 × 2.0) = 32.19

Therefore, the non-ideal pressure is:

Pnon-ideal = 32.19 atm

To find the ideal pressure, we can use the ideal gas law:

PV = nRT

Pideal = nRT/V = 2.0 mol × 0.0821 L･atm/mol･K × 200.0 K/7.30 L

Pideal = 8.77 atm

Finally, we can calculate the difference in pressure between ideal and non-ideal conditions:

ΔP = Pnon-ideal - Pideal = 32.19 atm - 8.77 atm = 23.42 atm

Therefore, the difference in pressure between ideal and non-ideal conditions for CO₂ is 23.42 atm.

Know more about Van der Waals equation here:

https://brainly.com/question/29412319

#SPJ11

The structure of trehalose can be determined based on its chemical formula, [tex]C12H22O11[/tex], and the fact that it only forms D-glucose upon hydrolysis.

Trehalose is a disaccharide composed of two glucose molecules linked by an alpha-1,1 glycosidic bond. This means that the glucose molecules are joined together through their first and first carbon atoms, respectively. The structure can be written as:

[tex]HOCH2(CHOH)4α-D-Glc-(1→1)-α-D-Glc-CH2OH[/tex]

where [tex]"α-D-Glc"[/tex] represents a glucose molecule in its alpha configuration.

To visualize the structure, we can draw it in a condensed form, where the two glucose molecules are shown connected by a straight line:

[tex]HOCH2(CHOH)4α-D-Glc-(1→1)-α-D-Glc-CH2OH[/tex]

To know more about chemical formula refer to-

https://brainly.com/question/31713710

#SPJ11

Four reasonable resonance structures for the [tex]PO_3F^2^-[/tex] are:

Structure 1:
O- P(=O)-O- F

Structure 2:
O- P(-O•)-O•- F

Structure 3:
O•- P(-O)-O- F,

Structure 4:
O•- P(-O•)-O•- F

The [tex]PO_3F^2^-[/tex] ion has four reasonable resonance structures, which are shown below:

Structure 1:
O- P(=O)-O- F, with formal charges of +1 on the P atom, -1 on the F atom, and -1 on each of the two terminal O atoms.

Structure 2:
O- P(-O•)-O•- F, with formal charges of 0 on the P atom, -1 on the F atom, and -1 on each of the two terminal O atoms.

Structure 3:
O•- P(-O)-O- F, with formal charges of -1 on the P atom, -1 on the F atom, and 0 on each of the two terminal O atoms.

Structure 4:
O•- P(-O•)-O•- F, with formal charges of -2 on the P atom, -1 on the F atom, and 0 on each of the two terminal O atoms.

To draw four reasonable resonance structures for the [tex]PO_3F^2^-[/tex] ion, consider that the central phosphorus (P) atom is bonded to the three oxygen (O) atoms and to the fluorine (F) atom. Here are the four resonance structures with formal charges:

1. P is double bonded to one O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.

2. P is double bonded to the second O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.

3. P is double bonded to the third O, single bonded to the other two O atoms, and single bonded to F. The O atom with a double bond has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of 0.

4. P is single bonded to all three O atoms and single bonded to F. One O atom has a formal charge of 0, the other two O atoms have a formal charge of -1 each, P has a formal charge of +1, and F has a formal charge of -1.

These four resonance structures show the distribution of electrons and formal charges for the [tex]PO_3F^2^-[/tex] ion, illustrating its resonance stabilization.

For more question on resonance structures

https://brainly.com/question/419650

#SPJ11

The percent yield of the reaction is 80%.

To calculate the percent yield, we need to use the following formula:

The actual yield of the reaction is 342 mg.

To calculate the theoretical yield, we need to first calculate the number of moles of (E)-stilbene and pyridinium bromide perbromide used in the reaction:

Number of moles of (E)-stilbene

Number of moles of pyridinium bromide perbromide

Theoretical yield of meso-stilbene dibromide = number of moles of (E)-stilbene x 2 = 0.002364 mol x 340.05 g/mol = 803 mg

Now we can substitute the values into the formula:

Therefore, the percent yield of the reaction is 80%.

To learn more about percent yield, here

https://brainly.com/question/17042787

#SPJ4

Compared to the average population around the world, North America has a (a) 24% greater percentage of people with access to safely managed drinking water facilities as of 2020.

According to the information provided, the percentage of the population with access to drinking water facilities in North America is higher than the average for the world.

The exact percentage varies depending on the option selected in the question, but the difference ranges from 16% to 98%. This difference may be attributed to several factors, including a more developed infrastructure and better regulation of water quality in North America.

However, it is important to note that access to drinking water is still a significant issue in some areas of North America, particularly among marginalized communities. Efforts to improve water access and quality must continue to ensure that everyone has access to this essential resource.

To know more about the average population refer here :

https://brainly.com/question/21181144#

#SPJ11

If we add 45.0 g of sodium chloride to 500.0 g of water,  the melting point is -  5.7 °C and the boiling point of the solution is 101.5 °C.

The mass of the NaCl = 45 g

The mass of the water = 500 g

The moles of the NaCl = mass / molar mass

                                      = 45 / 58.44

                                      = 0.770 mol

The molality is expressed as :

b = moles of solute / mass of solvent in kg

b = 0.770 / 0.5

b = 1.54 m

The boiling-point elevation  :

ΔTb = 2 × 0.512 × 1.54

       = 1.5 ° C

The boiling point, Tb = 100°C + 1.5 °C

                                   = 101.5 °C

The expression is as :

ΔTf = 2 × 1.86 × 1.54

     = 5.7 °C

The melting point = 0 - 5.7

                              = - 5.7 °C

To learn more about boiling point here

https://brainly.com/question/17478959

#SPJ4

At equilibrium, the concentrations of [tex]H_{3} O+, C_{6} H_{5}COO[/tex]-, and [tex]C_{6} H_{5}COO[/tex] in the solution will be 0.038 M, 0.038 M, and 0.012 M, respectively.

First, we can write the chemical equation for the dissociation of benzoic acid in water as follows:  [tex]C_{6}H5COOH + H_{2}O[/tex] ⇌[tex]C_{6}H_{5}COO- + H_{3}O[/tex]

The acid dissociation constant, Ka, is given as 6.3 × 10^-5.

[tex]Ka = [C_{6}H_{5}COO-][H_{3}O+] / [C_{6}H_{5}COOH][/tex]

We can assume that the initial concentration of [tex]C_{6}H_{5}COOH[/tex] is equal to its concentration at equilibrium, x. Thus, at equilibrium:

[tex][C_{6}H_{5}COOH] = x M \\[/tex]

[tex][C_{6}H_{5}COO-] = y M \\[/tex]

[tex][H_{3}O+] = y M\\[/tex]

Using the equilibrium expression and the given value of Ka, we can solve for the values of x and y:

[tex]Ka = [C_{6}H_{5}COO-][H_{3}O+] / [C_{6}H_{5}COOH]\\6.3 * 10^-5 = y^2 / x[/tex]

Since we know that the initial concentration of benzoic acid is 0.050 M, we can write: [tex]x + y = 0.050 M[/tex]

Now we have two equations and two unknowns. Solving for x and y:

[tex]x = 0.012 M\\y = 0.038 M[/tex]

To know more about equilibrium, here

brainly.com/question/30807709

#SPJ4

The order of the reaction in ligand is zeroth order, as changing the ligand concentration from 1.0 mM to 200 mM does not affect the reaction rate. The rate equation is: rate = k[substrate], where k is the rate constant.

The order of the reaction in substrate is first order, as doubling the substrate concentration (from 5 mM to 10 mM) leads to a doubling of the reaction rate so the or.

To find the MSDS for decahydronaphthalene, one can search for it on the website of the manufacturer or supplier. Alternatively, one can search for it on the website of the National Institute for Occupational Safety and Health (NIOSH), which provides a database of MSDSs for various chemicals.

It is important to consult the MSDS before handling or using the chemical, as it contains information on its physical and chemical properties, hazards, and precautions for safe use and disposal.

To know more about rate constant click on below link:

https://brainly.com/question/31742254#

#SPJ11

The blanks are filled by the following;

A balanced reaction equation is a chemical equation that shows the reactants and products of a chemical reaction, and the relative amounts of each involved in the reaction.

In a balanced reaction equation, the number of atoms of each element must be the same on both sides of the equation. This is achieved by adjusting the coefficients (the numbers in front of the chemical formulas) of the reactants and products until the number of atoms of each element is equal on both sides.

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

Hydrogen peroxide is a major contributor to photochemical smog, which is a type of air pollution that is formed through the reaction of sunlight with various pollutants in the atmosphere.

When sunlight shines on the atmosphere, it causes a chain reaction that leads to the formation of photochemical smog.

Hydrogen peroxide is produced in the atmosphere through the reaction of hydrocarbons and nitrogen oxides. Hydrocarbons are compounds that contain carbon and hydrogen, and they are emitted by vehicles, factories, and other sources. Nitrogen oxides are emitted by vehicles and power plants.

When these two pollutants react with sunlight, they form a variety of other compounds, including hydrogen peroxide. The hydrogen peroxide then reacts with other pollutants in the atmosphere, such as volatile organic compounds, to form photochemical smog.

Photochemical smog is a serious environmental issue because it can cause a variety of health problems, including respiratory issues, eye irritation, and even cancer. It can also damage crops and other vegetation, and can contribute to global warming.

Overall, hydrogen peroxide plays a key role in the formation of photochemical smog, and reducing its emissions is an important step in improving air quality and protecting public health.

To know more about Hydrogen peroxide, visit:

https://brainly.com/question/29102186#

#SPJ11

16.128 grams of hydrogen gas would need to react in order to produce 972 kJ of heat energy.

So, first, we can calculate the amount of heat energy released per mole of [tex]H_2[/tex] reacted:

243 kJ of heat / 2 moles of [tex]H_2[/tex] = 121.5 kJ/mol of [tex]H_2[/tex]

We can use the following equation to calculate the amount of hydrogen gas required:

Amount of [tex]H_2[/tex]  = Energy released / Heat of reaction per mole of [tex]H_2[/tex]

Amount of [tex]H_2[/tex] = 972 kJ / 121.5 kJ/mol = 8 moles of [tex]H_2[/tex]

Finally, we can calculate the mass of [tex]H_2[/tex] required using its molar mass:

Mass of [tex]H_2[/tex] = Number of moles of[tex]H_2[/tex]x Molar mass of [tex]H_2[/tex]

Mass of [tex]H_2[/tex] = 8 moles x 2.016 g/mol = 16.128 g of [tex]H_2[/tex]

To know more about hydrogen gas, here

brainly.com/question/29802537

#SPJ4

Nitrogen gas ([tex]N_2[/tex]) has a molar mass of 28.02 g/mol, while hydrogen gas ([tex]H_2[/tex]) has a molar mass of 2.02 g/mol. Ammonia ([tex]NH_3[/tex]) has a molar mass of 17.03 g/mol.

We must calculate the moles of each reactant in order to identify the limiting reactant. We may determine that there are 5.0 moles of [tex]N_2[/tex] and 1.0 moles of [tex]H_2[/tex] based on the stated masses. The reaction is described by the balanced chemical equation [tex]N_2 + 3H_2 2NH_3[/tex], which indicates that 1 mole of [tex]N_2[/tex] reacts with 3 moles of [tex]H_2[/tex]. As a result, [tex]H_2[/tex] is the limiting reactant and there will be an excess reactant of 2.0 - (1.0/3) = 1.67 grams of [tex]H_2[/tex].

To know more about Nitrogen gas, here

brainly.com/question/11426882

#SPJ4

--The complete Question is, What is the molar mass of nitrogen gas, hydrogen gas, and ammonia in the Haber Process? Given that 11.0 grams of nitrogen gas and 2.0 grams of hydrogen gas are available, which reactant is the limiting reactant? What is the amount of excess reactant left over after the reaction?--

Ten different pollinators plants or trees or flowers are Bee balm, Black-eyed Susan, Butterfly weed, Coneflower, Lavender, Milkweed, Redbud tree, Sunflower, Wild rose, and Zinnia.

Pollinator plants are known as plants that attract and support pollinators, such as bees, butterflies, birds, and other insects or animals. The pollinators they attract help transfer pollen from one flower to another.

When pollinators tranfer pollens, they facilitate the fertilization and reproduction of flowering plants.

Find more exercises on pollinator plants;

https://brainly.com/question/21076663

#SPJ1