If you add 300 cal of hear to 100 g of sand at 20'c, what will be the final temperature of sand?

The pH of the solution is 12.28.

To solve this problem, we need to use the Kb expression for methylamine:

[tex]$K_b = \frac{[\mathrm{CH_3NH_2}][\mathrm{OH^-}]}{[\mathrm{CH_3NH_3^+}]}$[/tex]

We are given the concentration of methylamine and the moles of its conjugate acid, so we can find the initial concentration of [tex]$CH_{3}NH_{3}^{+}$[/tex]

[tex]$[CH_3NH_2]$[/tex]= 1.10 M

moles of [tex]$CH_{3}NH_{3}^{+}$[/tex] = 0.350 mol

initial [tex]$CH_{3}NH_{3}^{+}$[/tex] = moles / volume = 0.350 mol / 1.00 L = 0.350 M

Since the solution is a buffer, we can assume that the concentration of [tex]$CH_3NH_2$[/tex] and OH- are equal at equilibrium. Let's call this concentration x.

Then the concentration [tex]$CH_{3}NH_{3}^{+}$[/tex] at equilibrium will be (0.350 - x). Substitute these values into the Kb expression and solve for x:

[tex]4.40 × 10-4 = x^2 / (0.350 - x)[/tex]

x = 0.0193 M

Therefore, [OH-] = [tex]$[CH_3NH_2]$[/tex] = 0.0193 M.

To find the pH, we need to first find the pOH:

pOH = -log[OH-] = -log(0.0193) = 1.72

pH = 14 - pOH = 12.28

So the pH of the solution is 12.28.

Learn more about methylamine

https://brainly.com/question/28819363

#SPJ4

In the past, jars or containers used to disinfect were often incorrectly called Wet sanitizer.

A chemical agent or compound known as a disinfectant is used to destroy or eradicate bacteria on inert surfaces. Disinfection is less efficient than sterilisation, which is an extreme chemical or biological process that eliminates all forms of life, although it may not eradicate all microbes, particularly resistant bacterial spores. In general, disinfectants are separated from other antimicrobial substances like antibiotics. In the past, jars or containers used to disinfect were often incorrectly called Wet sanitizer.

To know more about disinfectant, here:

https://brainly.com/question/28522315

#SPJ4

At the isoelectric pH of a tetrapeptide, the total net charge is zero.

This means that the amino and carboxyl termini are both neutral, and neither contributes charge. Additionally, any internal amino acids with ionizable R groups will also be neutral at this pH, meaning that only non-ionizable R groups will be present. Thus, at the isoelectric pH, the positive and negative charges of the tetrapeptide's amino acids balance each other out, resulting in a net charge of zero.

To know more about Isoelectric Point:

https://brainly.com/question/14895346

#SPJ11

A gas is most likely to exhibit ideal gas properties when it is at low pressure and high temperature, where the gas molecules are far apart from each other and are moving around quickly, with weaker intermolecular forces of attraction.

The ideal gas law is a simple equation that relates the pressure, volume, temperature, and number of particles of an ideal gas:

PV = nRT

where P is the pressure of the gas, V is its volume, n is the number of moles of gas present, R is the gas constant, and T is the temperature of the gas in kelvin.

The ideal gas law assumes that the gas molecules have no volume and do not interact with each other. However, in real gases, the molecules do have a finite volume and do interact with each other, so their behavior deviates from that predicted by the ideal gas law. A gas is most likely to exhibit ideal gas behavior when it is at low pressure and high temperature. This is because at low pressures, the gas molecules are far apart from each other and have plenty of space to move around freely without colliding with each other. At high temperatures, the gas molecules have a lot of kinetic energy and are moving around very quickly, so their intermolecular forces of attraction are weaker. As a result, the gas molecules are more likely to behave like independent particles, which is exactly what the ideal gas law assumes.    At high pressures and low temperatures, the gas molecules are packed very closely together and are more likely to interact with each other, which causes them to deviate from ideal gas behavior. Similarly, at low pressures and low temperatures, the gas molecules are not moving around as quickly and are more likely to be affected by intermolecular forces, which again causes them to deviate from ideal gas behavior.

Click the below link, to learn more about Ideal Gas law:

https://brainly.com/question/13821925

#SPJ11

The transition metal in the sixth period that is expected to have chemical properties similar to zinc (Z=30) is cadmium (Cd, Z=48).

This is because both zinc and cadmium are in the same group (group 12) of the periodic table, which means they have similar electron configurations and hence similar chemical properties. Cadmium, like zinc, is a relatively soft, silvery-white metal that does not corrode easily and is often used in alloys and plating. It also has similar reactivity towards acids and forms similar compounds.

However, cadmium is a heavier metal than zinc and has a higher atomic number, which means it has more electrons and a larger atomic radius. This can result in slightly different physical and chemical properties compared to zinc.

To know more about atomic radius :

https://brainly.com/question/491497

#SPJ11

During radioactive decay, an atom's nucleus may release gamma rays. They may readily pierce the human body and travel tens of yards or more into the air.

A thick piece of paper or even a layer of clothing can inhibit alpha particles because they have the least penetrating power. The outer layer of dead skin on individuals also deters them.

Gamma rays' powerful penetration is due to the absence of electric charge, which makes them less reactive to matter than charged particles. Gamma rays can be utilised to radiograph holes due to their powerful penetrating abilities.

learn more about nuclear radiation

https://brainly.com/question/2647719

#SPJ1

The volume of the solution with a concentration of 1.645 M is found out to be 0.401 liters (or 401 mL).

To solve this problem, we make use the formula for molarity:

Molarity = moles of solute / volume of solution in liters

We are given the molarity of the solution in the question, and the amount of solute in moles, so by rearranging the formula to solve for the volume of the solution:

Volume of solution in liters = moles of solute / molarity

On substituting the given values:

Volume of solution in liters = 0.66 mol / 1.645 M

Volume of solution in liters = 0.401 L

Therefore, the volume of the solution is 0.401 liters (or 401 mL).

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ1

For determining  hybridization of the central atom draw the Lewis structure of molecule. predict molecular geometry using VSEPR model. Deduce the hybridization of the central atom based on the geometry of the molecule.

Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.

It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.

Learn more about molecular geometry,here:

https://brainly.com/question/30185738

#SPJ4

The pH of the solution is approximately 4.30.

The pH of a solution prepared by dissolving 0.075 moles of sodium acetate in 1.0 L of 0.25 M acetic acid can be determined using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

First, we need to find the pKa of acetic acid. The Ka for acetic acid is 1.8 x 10^-5. To find the pKa, we use the formula:

pKa = -log(Ka) = -log(1.8 x 10^-5) ≈ 4.74

Next, we need to find the concentrations of the conjugate base ([A-], acetate ion) and the acid ([HA], acetic acid) in the solution.

[A-] = moles of sodium acetate / volume of the solution = 0.075 moles / 1.0 L = 0.075 M

[HA] = concentration of acetic acid = 0.25 M

Now we can use the Henderson-Hasselbalch equation:

pH = 4.74 + log(0.075/0.25) ≈ 4.30

Learn more about pH : https://brainly.com/question/13557815  

#SPJ11

An anti-parallel pleated sheet is formed when two or more strands of a polypeptide chain align next to each other in opposite directions, creating a zig-zag pattern.

This pattern is held together by hydrogen bonds between the backbone atoms of adjacent strands. Anti-parallel pleated sheets are often found in the secondary structure of proteins and are a common feature in beta sheets.

The formation of an anti-parallel pleated sheet occurs due to the orientation of the hydrogen bonds that occur between the strands.

In an anti-parallel arrangement, the hydrogen bonds are formed between the carbonyl oxygen of one strand and the amide nitrogen of the adjacent strand, resulting in a stable and rigid structure.

Anti-parallel pleated sheets are crucial in the formation of many proteins, particularly those involved in enzymatic reactions and structural support. Understanding the formation and function of these structures is important in the study of protein structure and function, as well as in the development of new drugs and therapies.

To know more about anti-parallel pleated refer here:

https://brainly.com/question/8260781#

#SPJ11

The most commonly used of the full size practice bombs is Tsar Bomba.

The Tsar Bomba is the historical Russian practice bomb that is used for the building impractically or the large things. The Tsar Bomba was not considered for the operational use. Because of its size the device could not be able to deployed by the ballistic missile.

The bomb has to be the transported by the conventional aircraft, that could easily be the intercepted before it is reaching its target.  The Tsar Bomba will produced the very most powerful which is human made explosion that be ever recorded.

To learn more about bomb here

https://brainly.com/question/30288409

#SPJ4

According to unit conversion, there are 264.25 grams of trace element collected.

Unit conversion is defined as a multi-step process which involves multiplication or a division operation by a numerical factor.The process of unit conversion requires selection of appropriate number of significant figures and the rounding off procedure.

It involves a conversion factor which is an expression for expressing the relationship between the two units.It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

There are 0.064 gram in 1 cm³ of water thus in cylinder with a radius of 8.5 cm and a height of 18.2 cm volume is πr²h = 3.14×8.5×8.5×18.2=4128.94 cm³ thus this volume has 4128.94×0.064=264.25 g.

Learn more about unit conversion,here:

https://brainly.com/question/19420601

#SPJ4

The molar mass of pentane when 4.18 × [tex]10^{16[/tex] molecules of pentane weighed 5.00 μg is 72.0 g/mol. The correct option is A.

The molar mass of pentane can be determined using the given information. First, we can find the number of moles of pentane by dividing the number of molecules ([tex]4.18 * 10^{16[/tex]) by Avogadro's number ([tex]6.022 * 10^{23[/tex] molecules/mol):

([tex]4.18 * 10^{16[/tex] molecules) / ([tex]6.022 * 10^{23[/tex] molecules/mol) = 6.94 × [tex]10^{-8[/tex] mol

Next, we need to convert the mass of pentane from micrograms (μg) to grams (g):

5.00 μg * (1 g / 1,000,000 μg) = 5.00 × [tex]10^{-6[/tex] g

Now we can calculate the molar mass of pentane by dividing the mass (g) by the number of moles (mol):

[tex](5.00 * 10^{-6} g) / (6.94 * 10^{-8} mol)[/tex] = 72.0 g/mol

Thus, the molar mass of pentane is approximately 72.0 g/mol, which corresponds to option A.

For more such questions on Molar mass.

https://brainly.com/question/11067519#

#SPJ11

Most GP bombs have a weight distribution that is split between the explosive payload and the bomb casing. The explosive weight of a GP bomb is typically around 50-60% of the total weight of the bomb.

This explosive weight percentage is determined by a few factors, including the desired blast radius, the target type and location, and the capabilities of the delivery system. Generally, a higher explosive weight percentage will result in a larger blast radius and greater destruction, but it may also require a larger delivery system or have unintended collateral damage.

GP bombs, or general purpose bombs, are designed to be versatile and effective against a variety of targets, including buildings, vehicles, and personnel. The explosive weight percentage of a GP bomb is carefully calibrated to provide maximum damage to the intended target while minimizing the risk of harm to nearby civilians or structures.

Overall, the explosive weight percentage of most GP bombs is a critical factor in determining their effectiveness and safety. By carefully balancing the weight of the explosive payload with the bomb casing, military planners can ensure that GP bombs are powerful, accurate, and reliable weapons in a variety of combat scenarios.

For more such questions on GP Bombs, visit:

brainly.com/question/31606134

#SPJ11

The enthalpy of the reaction of nitrogen with oxygen to produce nitrogen dioxide is Nâ + 2Oâ‚‚ → 2NOâ  is  -124 kJ.

We can use Hess's Law:

Here, we need to obtain the enthalpy of the reaction

N₂ + 2O₂ → 2NO₂

Manipulating the given reactions as follows:

Reverse the first reaction to get:

N₂ + O₂ → 2NO ΔH = +180 kJ

Multiply second reaction by 1/2 to get:

NO + 1/2O₂ → NO₂ ΔH = -56 kJ

Add two above reactions:

N₂ + 2O₂ → 2NO₂ ΔH = 124 kJ

Therefore, enthalpy of reaction N₂ + 2O₂ → 2NO₂ is +124 kJ. This means that reaction is endothermic.

To know more about Hess's Law, here

brainly.com/question/31508978

#SPJ4

Between OH and C=O, the strong nucleophile is OH and the strong electrophile is C=O.

1. OH (hydroxide ion) is a strong nucleophile because it has a negative charge on the oxygen atom, which allows it to donate its lone pair of electrons to an electrophilic center.
2. C=O (carbonyl group) is a strong electrophile because the carbon atom has a partial positive charge due to the electronegativity difference between carbon and oxygen atoms in the double bond. This makes the carbon atom highly susceptible to nucleophilic attack.

To know more about Nucleophiles and Electrophiles:

https://brainly.com/question/27127109

#SPJ11

The reduction potential for the zinc half-reaction with copper as the reference electrode is -0.42 V.

To find the reduction potential for the zinc half-reaction with copper as the reference electrode, we need to use the Nernst equation:

Ecell = Eºcell - (RT/nF) ln(Q)

where Eºcell is the standard cell potential, R is the gas constant, T is the temperature, n is the number of electrons transferred in the cell reaction, F is the Faraday constant, and Q is the reaction quotient.

We know that the standard reduction potential for the zinc half-reaction is -0.76 V (with SHE as the reference electrode). To convert this to the potential with copper as the reference electrode, we need to add the standard reduction potential for the copper half-reaction:

[tex]\mathrm{Cu^{2+} + 2e^- \rightarrow Cu} \qquad E^\circ_{\mathrm{red}} = +0.34 , \mathrm{V}[/tex]

We can then use the equation:

Eºcell (with Cu as the reference) = Eºcell (with SHE as the reference) + Eºred (for the copper half-reaction)

Eºcell (with Cu as the reference) = -0.76 V + 0.34 V = -0.42 V

Therefore, the reduction potential for the zinc half-reaction with copper as the reference electrode is -0.42 V.

Learn more about zinc half-reaction

https://brainly.com/question/13584368

#SPJ4

P (Phosphorus) has a higher electronegativity than Si (Silicon).

An element's ability to draw electrons into a chemical connection is referred to as its electronegativity. As you advance up the periodic table towards the upper right corner, electronegativity rises.

Silicon (Si) has a lower electronegativity value than phosphorus (P) since it is situated to the left of phosphorus in the periodic table. Phosphorus has a stronger electronegativity than silicon, for this reason.

Silicon has an electronegativity value of 1.90 on the Pauling scale, while phosphorus has an electronegativity value of 2.19. This suggests that in a chemical bond, phosphorus has a stronger capacity to draw electrons towards itself than silicon.

To know more about the electronegativity refer here :

https://brainly.com/question/10531792#

#SPJ11

Sucrose is a nonreducing sugar because its anomeric carbons are involved in a glycosidic linkage between glucose and fructose, and are not free to participate in oxidation reactions. Therefore, sucrose cannot act as a reducing agent, and is classified as a nonreducing sugar.

Disaccharides are composed of two monosaccharide units that are linked together by a glycosidic bond. The reducing or nonreducing property of a disaccharide depends on the presence or absence of a free anomeric carbon in its structure.

A reducing sugar is a sugar that has a free anomeric carbon atom that can be oxidized, for example, in the presence of Benedict's reagent. This means that reducing sugars can act as reducing agents, and are capable of reducing other compounds.

All disaccharides except sucrose are reducing sugars because they have a free anomeric carbon atom that can be oxidized. For example, maltose, lactose, and cellobiose all have a free anomeric carbon that can be oxidized, making them reducing sugars.

For more question on nonreducing sugar click on

https://brainly.com/question/30587111

#SPJ11

Carbon monoxide poisoning occurs when an individual inhales excessive amounts of a toxic gas, carbon monoxide (CO).

Carbon monoxide is a toxic gas produced from the incomplete combustion of carbon-containing materials, such as gas, wood, or coal and causes poisoning due to its excessive inhalation by an individual.
The main reason carbon monoxide poisoning is dangerous is that it prevents the proper delivery of oxygen to the body's tissues. CO binds to hemoglobin in red blood cells much more strongly than oxygen does, forming carboxyhemoglobin. This binding reduces the amount of oxygen that can be carried and delivered to the body's organs, leading to tissue hypoxia.

Symptoms of carbon monoxide poisoning include headaches, dizziness, nausea, vomiting, confusion, shortness of breath, and even loss of consciousness. In severe cases, it can be fatal. To prevent carbon monoxide poisoning, it is important to install carbon monoxide detectors in your home, ensure proper ventilation, and maintain fuel-burning appliances regularly.

Learn more about toxic gas carbon monoxide : https://brainly.com/question/24246568

#SPJ11

The ratio of ADP to ATP at equilibrium is [tex]e^12.[/tex] The equation for the equilibrium constant for the hydrolysis of ATP is:

[tex]Keq = [ADP][Pi] / [ATP][/tex]

where ΔG′° is the standard free energy change for the reaction, R is the gas constant, and T is the temperature in Kelvin.

We are given that

ΔG′° = -30 kJ/mol,

R = 8.314 J/mol K, and

T = 298 K.

Substituting these values into the equation, we get:

[tex]Keq = e^(-30 kJ/mol / (8.314 J/mol K * 298 K))[/tex]

[tex]Keq = e^12[/tex]

Therefore, the ratio of ADP to ATP at equilibrium is [tex]e^12.[/tex]

To know more about equilibrium constant:

https://brainly.com/question/28559466

#SPJ12

If 2.35 grams of the magnesium oxide are formed, the grams of the Mg reacted is 1.40 g.

The chemical equation for the magnesium oxide is as :

2Mg(s) + O₂(g)   ---->  2MgO(s)

The magnesium oxide = 2.35 g

The 2 moles of the magnesium oxide are formed by the 2 moles of the Magnesium.

The mole ratio are = 2 : 2

The mole ratio are = 1 : 1

The number of the moles of the MgO = mass / molar mass

The number of the moles of the MgO = 2.35 / 40.30

The number of the moles of the MgO = 0.058 mol

The number of the moles of the Mg = 0.058 mol

The mass of the Mg = moles × molar mass

The mass of the Mg = 0.058 × 24.30

The mass of the Mg = 1.40 g

To learn more magnesium oxide here

https://brainly.com/question/24605172

#SPJ4

The military is consciously or unconsciously tapping into genes that were adaptive in our ancestors due to B. Kin selection.

This concept emphasizes the role of relatedness in the evolution of cooperative behaviors, which ultimately increases the likelihood of soldiers protecting and sacrificing for each other.

The military may be consciously or unconsciously selecting individuals who possess these genes. This is because soldiers who are willing to protect and sacrifice for their fellow soldiers are more likely to succeed in combat and fulfill the objectives of the military.

These behaviors are likely to have been favored by natural selection in our ancestors because they increased the likelihood of survival and reproductive success.

In addition to kin selection, other evolutionary theories such as reciprocal altruism and group selection may also play a role in the evolution of cooperative behaviors in the military.

Reciprocal altruism refers to the exchange of beneficial behaviors between individuals, and group selection emphasizes the role of group-level competition and cooperation in the evolution of traits.

To learn more about altruism, refer below:

https://brainly.com/question/27906346

#SPJ11

Answer:2.14 moles

Explanation:

n=PV/RT

n=(3.2×16.2)÷(0.0821×(22+273.15)

n= 2.14 moles2

The greenhouse gas that, in the lower troposphere, is formed by photochemical reactions is option (C) CH4, also known as methane.

Methane is a potent greenhouse gas that is released into the atmosphere through various natural and human activities, such as agriculture, fossil fuel production, and waste management.

In the lower troposphere, methane is formed by photochemical reactions between other compounds, such as carbon dioxide and nitrogen oxides, and can contribute to the warming of the Earth's surface.

Methane is produced through both natural and human activities. Natural sources include wetlands, oceans, and natural gas deposits, while human activities include agriculture (e.g. livestock and rice cultivation), fossil fuel production and use, and waste management (e.g. landfills and wastewater treatment).

learn more about Methane here:

https://brainly.com/question/30217912

#SPJ4

There are approximately [tex]8.10 * 10^{22}[/tex] sodium ions present in the initial 50 mL solution of [tex]Na_2CO_3[/tex]. The closest answer choice is (a) [tex]1.5 * 10^{22[/tex], but it is not the correct answer.

To calculate the number of sodium ions present in the initial solution of [tex]Na_2CO_3[/tex], we need to use the Avogadro's number and the molar mass of [tex]Na_2CO_3[/tex]. The molar mass of [tex]Na_2CO_3[/tex] is 106 g/mol, which means that one mole of [tex]Na_2CO_3[/tex] contains [tex]6.02 * 10^{23[/tex] molecules.

First, we need to calculate the number of moles of [tex]Na_2CO_3[/tex] present in the initial 50 mL solution. We can use the formula:

moles of solute = mass of solute / molar mass

moles of [tex]Na_2CO_3[/tex] = 7.15 g / 106 g/mol

moles of [tex]Na_2CO_3[/tex] = 0.0673 mol

Next, we need to use the stoichiometry of the chemical formula of [tex]Na_2CO_3[/tex] to determine the number of moles of sodium ions present. In [tex]Na_2CO_3[/tex], there are two sodium ions for every one molecule of [tex]Na_2CO_3[/tex]. Therefore, we can multiply the number of moles of [tex]Na_2CO_3[/tex] by 2 to get the number of moles of sodium ions:

moles of [tex]Na^+[/tex] ions = 2 x moles of [tex]Na_2CO_3[/tex]

moles of [tex]Na^+[/tex] ions = 2 x 0.0673 mol

moles of [tex]Na^+[/tex] ions = 0.1346 mol

Finally, we can use Avogadro's number to convert the moles of sodium ions to the number of sodium ions:

number of [tex]Na^+[/tex] ions = moles of [tex]Na^+[/tex] ions x Avogadro's number

number of [tex]Na^+[/tex] ions = 0.1346 mol x [tex]6.02 * 10^{23[/tex]/mol

number of [tex]Na^+[/tex] ions = [tex]8.10 * 10^{22}[/tex]

For more question on sodium ions click on

https://brainly.com/question/18380904

#SPJ11

Answer:

in the picture

Explanation:

in the picture

in the picture

in the picture

We can use the combustion reaction of the unknown compound with oxygen to determine its empirical formula. In this reaction, the unknown compound reacts with oxygen to form carbon dioxide and water: The Correct option is A  [tex]CH_{2}[/tex].

CₓHᵧ + O₂ → CO₂ + H₂O

We can then use the mass of carbon dioxide and water produced to determine the empirical formula of the unknown compound.

First, we need to determine the moles of carbon dioxide and water produced:

moles of CO₂ = 4.554 g / 44.01 g/mol = 0.1036 mol

moles of H₂O = 2.322 g / 18.02 g/mol = 0.129 mol

Next, we can use the mole ratios of carbon and hydrogen in the unknown compound to determine its empirical formula. From the balanced combustion equation, we know that the ratio of moles of carbon to moles of hydrogen is 1:1, so the empirical formula of the unknown compound is:

C₁H₁ = CH

Therefore, the answer is (A) [tex]CH_{2}[/tex].

Learn more about carbon dioxide

https://brainly.com/question/13229518

#SPJ4

To determine the limiting reagent, we need to compare the amount of moles of each reactant used in the chemical reaction. The reactant that produces the least amount of product is the limiting reagent.

First, let's calculate the number of moles of each reactant:

- Moles of Ca3(PO4)2 = (155 g) / (310.18 g/mol) = 0.5 mol

- Moles of H2SO4 = (155 g) / (98.08 g/mol) = 1.58 mol

- Moles of H3PO4 = (88 g) / (97.99 g/mol) = 0.898 mol

According to the balanced chemical equation, 1 mole of Ca3(PO4)2 reacts with 3 moles of H2SO4 to produce 2 moles of H3PO4. Therefore, if we use 0.5 moles of Ca3(PO4)2, we need 1.5 moles of H2SO4 to react completely.

Since we only have 1.58 moles of H2SO4, this means that H2SO4 is not the limiting reagent. However, if we use 0.5 moles of Ca3(PO4)2, we will only produce 1 mole of H3PO4. Since we need 0.898 moles of H3PO4 to use up all of the available phosphoric acid, Ca3(PO4)2 is the limiting reagent.

Therefore, the limiting reagent in this reaction is Ca3(PO4)2.

Note: It is important to check the calculation for each reactant to ensure that we have the correct limiting reagent. In this case, we found that H2SO4 was not the limiting reagent because we had more moles of H2SO4 than what was needed to react with all of the Ca3(PO4)2. If we had found that H2SO4 was the limiting reagent, we would have needed to recalculate the amount of product produced using the moles of H2SO4 instead of Ca3(PO4)2.

The oxidation state of copper in the acidic solution is +2. This is because when copper is oxidized at the anode during electrolysis, it loses two electrons to form Cu2+ ions.

These positively charged ions then migrate towards the cathode where they are reduced to form metallic copper atoms, which plate out onto the electrode. The oxygen gas produced at the anode comes from the oxidation of water molecules, where two H+ ions and two electrons are formed.

Overall, the electrolysis of the acidic copper solution involves the transfer of electrons from the anode to the cathode, with copper ions being reduced and water molecules being oxidized.

The fact that for every gram of oxygen produced, one gram of copper plates out shows that the reaction is balanced in terms of the number of electrons transferred, which is a fundamental principle of electrochemistry.

To know more about electrolysis refer here:

https://brainly.com/question/12054569#

#SPJ11