The energy input would it take to climb a ladder will be 20000 J.
What is the mechanical advantage?Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtain the efficiency of the given mechanical machine.
Mechanical advantage is a measure of how much a machine multiplies the input force.
The complete question is;
"if we assume a typical efficiency of 25% for the human body how much energy input would it take to climb a ladder increasing body potential energy by 5000J"
The formula for the efficiency is;
[tex]\rm E = \frac{P}{\eta} \\\\ E = \frac{5000}{0.25} \\\\ E = 20000 \ J[/tex]
Hence, the energy input would it take to climb a ladder will be 20000 J.
To learn more about the mechanical advantage, refer to the link;
https://brainly.com/question/7638820
#SPJ1
In what direction does an omnidirectional antenna radiate radio frequency (rf) energy?
An omnidirectional antenna radiates radio frequency (rf) energy equally in all directions around its axis.
What is omnidirectional antenna?An omnidirectional antenna is an antenna which radiates radio frequency (rf) energy equally in all directions around its axis.
Radio frequency energy is a form of electromagnetic radiation.
An antenna receives as well as sends out radio frequency energy.
Learn more radio frequency energy at: https://brainly.com/question/23136889
#SPJ12
how do the interiors of jupiter and saturn differ? (select all that apply.)
The interior part of Jupiter and Saturn are different from each other due to difference of core and magnetic field.
How do the interiors of Jupiter and Saturn differ?The interiors of Jupiter and Saturn differ from one another because Jupiter has a larger metallic hydrogen core as compared to Saturn. It has stronger magnetic field as compared to Saturn.
So we can conclude that the interior part of Jupiter and Saturn are different from each other due to difference of core and magnetic field.
Learn more about Jupiter here: https://brainly.com/question/3522722
#SPJ11
*picture choice question*
Which is a renewable
resource?
Answer:
B
Explanation:
That is solar energy and the sun will be releasing energy constantly for the rest of its life, meaning renewable
A tennis ball moving with velocity v₁ hits a stationary tennis ball. The collision is inelastic and the two balls start travelling
together, as shown in the picture. What is the velocity of the two tennis balls moving
together?
A. 2v1
B. 1/2v1
C. 1/3v1
D. V1
Answer:
B.1/2v1 that's the answer
the pressure in a water pipe in the ground floor of a building is 4×10⁵ Pa and three floors up is 2×10⁵. What is the difference in height between the ground floor and the third floor? Density of water=1×10³ kgm-³
The difference in height between the ground floor and the third floor is
What is gauge pressure?The pressure measured by the pressure gauge is called the gauge pressure.
Given is the the pressure in a water pipe in the ground floor of a building is 4×10⁵ Pa and three floors up is 2×10⁵ Pa. Density of water ρ = 1×10³ kg/m³
From the Bernoulli's theorem,
ΔPg = ρgΔh
( 4×10⁵ - 2×10⁵) = 1000 x 9.81 x Δh
Δh = 20.4 m
Thus, the difference in height is 20.4 m
Learn more about gauge pressure
https://brainly.com/question/13390708
#SPJ1
A bus start from rest. If the acceleration of bus is 0.5 m/s square. what will be its velocity at the end of 2 minutes?what will be the distance cover?
Answer:
3586
Explanation:
by using formula s=it+0.5at^2
Answer:
[tex]\fbox {Velocity = 60 m/s, Distance = 3600 m}[/tex]
Explanation:
Part (i) : Velocity at end of 2 minutes
Equation used ⇒ [tex]\boxed {v = u + at}[/tex]
⇒ t = 2 minutes = 2 x 60 = 120 seconds
⇒ v = 0 + (0.5)(120)
⇒ v = 60 m/s
Part (ii) : Distance covered
Equation used ⇒ [tex]\boxed {S = \frac{v^{2}-u^{2}}{2a}}[/tex]
⇒ S = (60)² - (0)² / 2(0.5)
⇒ S = 3600 m
If we rub two neutral objects
Answer:
electrons can be knocked loose from one object and picked up by the other. The object that gains electrons becomes negatively charged, while the object that loses electrons becomes positively charged.
A practical machine cannot be 100% efficient?
please give me the answer.
[tex]\huge\color{Basic}{\boxed{\tt{answer}}}[/tex]
A practical machine cannot be 100% efficient? IF THE CHOICES ARE TRUE OR FALSE THEN U GOThe answer is false a machine cannot be 100 percent efficient because the output of a machine is always less than input. (correct me if I’m wrong)Have a great day<3Answer: yes it cannot be 100% efficient
Explanation:
only an ideal machine with 0 friction can have 100 percent efficiency
Which vector shows the velocity of the yo-yo at this moment?
The vector which shows the velocity of the yo-yo at this moment is A and is denoted as option A.
What is Velocity?This is referred to the rate of change of distance with time and the unit is metre per seconds.
A shows the direction of motion is same as the direction of velocity and is the tangent at that particular point hence why it was chosen as the most appropriate choice.
Read more about Velocity here https://brainly.com/question/6504879
#SPJ1
The James Webb Space Telescope (JWST) will allow us to look back in time and observe the early universe. You are a scientist trying to observe an object that emitted its light a long time ago.
(a) Explain why the light you receive from the object is red-shifted.
The object has a redshift of 7.6 and the JWST observes the object at a wavelength of 2 microme- tres (mid-infrared light).
(b) What is the wavelength of the light emitted by the object?
(c) What type of radiation was originally emitted by the object?
i will mark you as brainiest please help me sooner
#a
This is because red color has higher wavelength and it can clear universe and our atmosphere better,
This has the same reason as how we can see only red color during sunset.
#b
[tex]\boxed{\sf z=\dfrac{ \lambda-\lambda_o}{\lambda_o}}[/tex]
lambda_o be x
Put values
[tex]\\ \rm\Rrightarrow 7.6=\dfrac{2\times10^{-6}-x}{x}[/tex]
[tex]\\ \rm\Rrightarrow 7.6=\dfrac{2\times 10^{-6}}{x}-1[/tex]
[tex]\\ \rm\Rrightarrow 8.6=\dfrac{2\times 10^{-6}}{x}[/tex]
[tex]\\ \rm\Rrightarrow x=0.23\times 10^{-6}m[/tex]
[tex]\\ \rm\Rrightarrow x=0.23\mu m[/tex]
Deena made a chart to summarize features of a velocity vs. time graph for objects with constant acceleration and objects with constant velocity.
The statement which best describes Deena's error is: B. Include the area of the rectangle under the line to find displacement for constant acceleration.
What is a velocity vs. time graph?A velocity vs. time graph can be defined as a type of graph that is used to graphically represent the rate of change of velocity of an object with respect to time.
Based on the information provided in the table shown (see attachment), the statement which best describes Deena's error is her not including of the area of the rectangle under the line, so as to enable her find displacement for constant acceleration.
Read more on acceleration here: brainly.com/question/24728358
#SPJ1
Complete Question:
Deena made a chart to summarize features of a velocity vs. time graph for objects with constant acceleration and objects with constant velocity.
Which best describes Deena's error?
A. The line for constant velocity is not horizontal; it is diagonal and slopes downward.
B. Include the area of the rectangle under the line to find displacement for constant acceleration.
C. Find acceleration by finding the area of the rectangle above the line.
D. Find velocity by calculating the slope of the line.
what is the gravitational field strength at a distance of 60.0 km above the surface of the earth
Answer:
g=9.64m/s^2.
Explanation:
Gravitational field strength (in other words, gravitational acceleration) is given as follows:g=GMR2g=R2GMwhere G=6.674×10−11m3kg⋅s2G=6.674×10−11kg⋅s2m3 is the gravitational constant, M=5.972×1024kgM=5.972×1024kg is the mass of the Earth, and R=6.371×106m+0.06×106m=6.431×106mR=6.371×106m+0.06×106m=6.431×106m is the distance from the center of the Earth to the required point above the surface (radius plus 60 km).
G = 9.4 m/s²
What is gravitational acceleration?Gravitational acceleration (symbolized g) is an expression used in physics to indicate the intensity of a gravitational field.
It is expressed in meters per second squared (m/s²).
At the surface of the earth, 1 g is about 9.8 m/s 2 .
According to the question,
Gravitational field strength is given as follows:
[tex]g = \dfrac{GM}{R^2}[/tex]
Where[tex]G = 6.674\times 10^{-11}\dfrac{m^3}{kg\cdot s^2}[/tex] is the gravitational constant,
[tex]M = 5.972\times 10^{24}kg[/tex] is the mass of the Earth,
and [tex]R = 6.371\times 10^{6}m + 0.06\times 10^{6}m = 6.431\times 10^{6}m[/tex]
Here, m is the distance from the center of the Earth to the required point above the surface (radius plus 60 km).
Thus, obtain:
[tex]g = \dfrac{6.674\times 10^{-11}\cdot 5.972\times 10^{24}}{(6.431\times 10^{6})^2} \approx 9.64m/s^2[/tex]
g ≈9.64m/s 2
Therefore ,
The gravitational field strength is g = [tex]9.64m/s^2[/tex]
Learn more about gravitational field strength here:
https://brainly.com/question/18511078
#SPJ2
.
1.) Identify one component of the visible spectra
2.) identify the component of the electromagnetic spectra that has the shortest wavelength
Answer:
1.) color
2.) Gamma Rays
Explanation:
by considering action-reacton forces,identify why water rises up a thin capillary tube
The forces of attraction between water molecules and the glass walls and within the molecules of water themselves are what enable the water to rise in a thin tube immersed in water.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
Force is defined as the product of mass and acceleration. Its unit is Newton.
Surface or interfacial forces lead to capillarity. The forces of attraction between the water molecules and the glass walls and among the water molecules themselves are what causes the water in a thin tube submerged in water to rise.
Hence, the water rises up a thin capillary tube can be explained by Newton's third law.
To learn more about the force refer to the link;
https://brainly.com/question/26115859#SPJ1
#SPJ1
1. State Coulomb's law.
2. Two equal balls having equal positive charge Q coulomb are suspended by two insulating strings of equal length what would be the effect of the force when a plastic sheet is inserted between the two?
3. State the junction rule.
4. what is the Toroid?
1. Coulomb's Law
Coulomb's law states that the force of a charged object on another charged object is directly proportional to the product of their charge(s) and inversely proportional to the square of the distance between them.
[tex]F_{elec}=k\frac{|q_1||q2|}{r^2}[/tex]
k is a constant.
2. The Force Would Decrease.
Coulomb's law predicts the electric force between two charged objects in a medium.
[tex]F=\frac{1}{4\pi\in_0 } \frac{|q_1q_2|}{r^2}[/tex]
where K is the medium's dielectric constant.
Vacuum: [tex]k=1[/tex]
Plastic: [tex]k > 1[/tex]
Therefore, the force between the two balls will decrease when the plastic sheet is inserted.
3. The Junction Rule states that the sum of magnitudes of the currents directed into a junction equals the sum of the magnitudes of the currents directed out of the current.
4. A Toroid is a doughnut shaped object whose surface is a torus. It annular shape is generated by revolving a circle around an axis external to the circle. Some example uses are RF chokes which is an inductor to have a high impedance to RF current and low impedance to DC current. Another use is variable-frequency oscillator (VFO). The frequency is set by a tuned circuit using capacitors and inductors. The frequency can be changed by adjusting the components in the tuned circuit. Just one last example is in mixers. These are used in transformers for Diode Ring Mixers. Which result in being ready, built, and homebrew.
Answer:
According to Coulomb's law, the force of attraction or repulsion between two charged bodies is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. It acts along the line joining the two charges considered to be point charges.Force will decrease. The force between charged balls will decrease.Kirchhoff's Junction RuleIt is an application of the principle of conservation of electric charge. The law states that at any circuit junction, the sum of the currents flowing into and out of that junction are equal.In mathematics, a toroid is a surface of revolution with a hole in the middle. The axis of revolution passes through the hole and so does not intersect the surface. For example, when a rectangle is rotated around an axis parallel to one of its edges, then a hollow rectangle-section ring is produced.what is the global food supply
Answer:
The food supply chain comprises all the stages that food products go through, from production to consumption
Explanation:
What happens during nuclear fission?
Answer:
During nuclear fission, a neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation. More neutrons are also released when a uranium atom splits. These neutrons continue to collide with other uranium atoms, and the process repeats itself over and over again.
Explanation:
In nuclear fission the nucleus of an atom breaks up into two lighter nuclei. The process may take place spontaneously in some cases or may be induced by the excitation of the nucleus with a variety of particles (e.g., neutrons, protons, deuterons, or alpha particles) or with electromagnetic radiation in the form of gamma rays. In the fission process, a large quantity of energy is released, radioactive products are formed, and several neutrons are emitted. These neutrons can induce fission in a nearby nucleus of fissionable material and release more neutrons that can repeat the sequence, causing a chain reaction in which a large number of nuclei undergo fission and an enormous amount of energy is released. If controlled in a nuclear reactor, such a chain reaction can provide power for society’s benefit. If uncontrolled, as in the case of the so-called atomic bomb, it can lead to an explosion of awesome destructive force.
Answer:
In nuclear fission, atoms are split apart, which releases energy. All nuclear power plants use nuclear fission, and most nuclear power plants use uranium atoms. During nuclear fission, a neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation.
An arrow is shot horizontally from the top of a building and it lands 200m from the foot of the building after 10s. assuming air resistance is negligible, calculate the initial velocity of the arrow, find also the height of the building
The initial velocity and the height of this building are 29 m/s and 780 meters respectively.
How to calculate the initial velocity?In order to calculate the initial velocity, we would apply the second equation of motion:
S = ut - ½at²
200 = u10 - ½(9.8 × 10²)
200 = u10 - 490
u10 = 490 - 200
u10 = 290
u = 290/10
Initial velocity, u = 29 m/s.
Next, we would determine the height of the building:
H = ut + ½at²
H = 29(10) + ½(9.8 × 10²)
H = 290 + 490
Height, H = 780 meters.
Read more on initial velocity here: https://brainly.com/question/19365526
#SPJ1
A violin sounds a note of F sharp, with a pitch of 370 Hz. What are the frequencies of the next three harmonics produced with this note?
Answer:
Answer 740 H z, 1110 H z, 1480 H z
Explanation:
The F sharp note (370 Hz) makes the next three harmonics with frequencies of 740 Hz, 1110 Hz, and 1480 Hz, respectively.
It is necessary to have an understanding of the relationship between harmonics and the fundamental frequency in order to calculate the frequencies of the following three harmonics produced by the note F sharp, which has a pitch of 370 Hz.
The fundamental frequency, denoted by f1, is the first harmonic and corresponds to the frequency of the note (F sharp in this example) when it was initially played. Its pitch is 370 hertz.
The fundamental frequency (f1) is multiplied by two to get the second harmonic frequency (f₂), which is written as f₂ = 2 × f1.
The frequency of the third harmonic (f₃) is equal to three times the frequency of the fundamental tone, or f₃ = 3 × f₁.
The frequency of the fourth harmonic, denoted by f₄, is equal to four times the frequency of the fundamental tone. f₄ = 4 × f₁
If we know that the fundamental frequency, or f₁, is 370 hertz, then we can figure out the frequencies of the following three harmonics, which are as follows:
f₂ = 2 × 370 Hz, which equals 740 Hz
f₃ = 3 times 370 Hz, which equals 1110 Hz; f₄ = 4 times 370 Hz, which equals 1480 Hz
Following the frequency of the F sharp note (370 Hz), the next three harmonics produced have frequencies of 740 Hz, 1110 Hz, and 1480 Hz respectively.
To know more about frequency
https://brainly.com/question/254161
#SPJ2
What are the effects of gravity on earth?
Answer:
Without it, we could not survive on Earth. Earth orbits the sun due to the gravity of the sun, which maintains us at a convenient distance from it to enjoy the sun's warmth and light. It keeps the air we need to breathe and our atmosphere in place. Our planet is held together by gravity.
The force of gravity between two objects is greatest when the objects have?
The force of gravity increases as the product of their individual masses' increases
Hope it helps!
What allows the electromagnet in a motor to rotate consistently in one
direction, transforming electrical energy into mechanical energy?
Hi!
Inside an electric motor, permanent magnets are set onto a ring surrounding a coil of wire. The communicater mother is what makes it spin
A girl at a state fair swings a ball in a vertical circle at the end of a string, the force of the string at the bottom is: A-Less than the weight of the ball B-greater than the weight of the ball C-equal to the weight of the ball D-Zero
which choice is correct and why? thx
The force of the string at the bottom is greater than the weight of the ball. The correct option is B.
What is Net force?When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.
A girl at a state fair swings a ball in a vertical circle at the end of a string.
When the ball is at the bottom, the force acting will be
The tension in the string , T = mass x centripetal acceleration + Force of gravity
So, T = m x ac + mg
The tension in the cable at the bottom will have centripetal force and weight forces acting on it.
Thus, the force of the string at the bottom is greater than the weight of the ball.
Learn more about net force.
https://brainly.com/question/18031889
#SPJ1
Keisha writes that if an object has external force acting on it then the object can be in dynamic equilibrium but not staric equilibrium
The statement that best describes Keisha errors is an object in either state of equilibrium must have no net force acting on it.
What is an object at dynamic equilibrium?An object is said to be on a dynamic equilibrium when it moves at a constant speed, and all the forces on the object are balanced.
An object is also said to be on static equilibrium when it is unable to move because all the forces which act on it compensate for one another.
Therefore, the statement that best describes Keisha errors is an object in either state of equilibrium must have no net force acting on it.
Learn more about force here:
https://brainly.com/question/25239010
#SPJ1
5. A weightlifter lifts a barbell of mass 50 kg to a height of 2m in 3s. (Take g = 9.8 m/s².) a) What is the weight of the barbell? 5. A weightlifter lifts a barbell of mass 50 kg to a height of 2m in 3s . ( Take g = 9.8 m / s² . ) a ) What is the weight of the barbell ?
Answer:
490N
Explanation:
W=m×g
W=50×9.8=490N
A car initially traveling at 15.0 m/s accelerates at a constant rate of 4.50 m/s2 over a distance of 45.0 m. how long does it take the car to cover this distance? (4 points)
A car initially traveling at 15.0 m/s accelerates at a constant rate of 4.50 m/s2 over a distance of 45.0 m, the time taken to cover this distance is mathematically given as
t = 2.24 s
What is the time taken to cover this distance?Generally, the equation for Kinematic relation is mathematically given as
S = ut + (1/2)at^2
Therefore
45 = 15t + 2.25 t^2
2.25 t^2 + 15 t -45 = 0
t = 2.24 s
In conclusion, the time is taken to cover this distance
t = 2.24 s
Read more about Time
https://brainly.com/question/4931057
#SPJ1
If your mass is 63.7 kg, and you are standing 7.5 m away from a boulder with
a mass of 9,750.6 kg, what is the gravitational force between you and the
boulder? Newton's law of gravitation is F
Gm m₂. The gravitational
=
gravity
constant G is 6.67 x 10-11 N-m²/kg².
A. 1.10 x 104 N
B. 7.37 x 10-7 N
C. 9.82 x 10-8 N
D. 5.52 x 10-6 N
Please help me!
Answer:
B
Explanation:
F=[tex]\frac{Gm1m2}{r^2}[/tex]
F=(6.67 x 10^-11)[tex]\frac{63.7X9,750.6}{7.5^2}[/tex]
F=7.36502254e-7
WHOEVER ANSWERS FIRST GETS BRAINLEST
Match the scenario to the term it represents.
Laura develops programs that flag suspicious network activity.
Greg calibrates electronic scales.
Tim ensures the output of a process remains in a defined range.
matching words-
communications
manufactoring
healthcare
Communications: Laura develops programs that flag suspicious network activity.
What is communication?Communication involves the transfer of information from one person (sender) to another (recipient), especially through the use of semiotics, symbols, signs and network devices.
How to match the scenarios?Communications: Laura develops programs that flag suspicious network activity.Healthcare: Greg calibrates electronic scales.Manufacturing: Tim ensures the output of a process remains in a defined range.Read more on communication here: https://brainly.com/question/26152499
#SPJ1
Two marbles, one twice as heavy as the other, are dropped to the ground from the roof of a building. Just before hitting the ground, the heavier marble has 1. as much kinetic energy as the lighter one. 2. twice as much kinetic energy as the lighter one. 3. half as much kinetic energy as the lighter one. 4. four times as much kinetic energy as the lighter one. 5. impossible to determine
Given that one marble is twice as heavy as the other, the correct statement is: the heavier marble has twice as much kinetic energy as the lighter one
How to determine the energy of the lighter marbleMass = mAcceleration due to gravity = gHeight = hKinetic energy of light marble (KE₁) =?KE = PE = mgh
KE₁ = mgh
How to determine the energy of the heavier marbleMass = 2mAcceleration due to gravity = gHeight = hKinetic energy of heavier marble (KE₂) =?KE = PE = mgh
KE₂ = 2mgh
How to campare both kinetic energies Kinetic energy of light marble (KE₁) = mghKinetic energy of heavier marble (KE₂) = 2mghComparison (KE₂ / KE₁) =?KE₂ / KE₁ = 2mgh / mgh
KE₂ / KE₁ = 2
Cross multiply
KE₂ = 2 × KE₁ =
KE₂ = 2KE₁
Learn more about energy:
https://brainly.com/question/10703928
#SPJ12
Home heating systems usually work in the following way: When the furnace warms a house above the set temperature of the thermostat, the thermostat is triggered and shuts off the furnace. When the temperature in the house drops below the set temperature, the furnace comes back on. True or false: Home heating systems work through negative feedback.
Home heating systems work through negative feedback by regulating the temperature through thermostat.
How home heating systems work through negative feedback?In thermostat, when the temperature of the room environment increases by the negative feedback system the furnace gets turn off, allowing the room to get to its normal temperature and when the temperature lower down it turns on again and maintain the temperature in equilibrium state.
So we can conclude that home heating systems work through negative feedback by regulating the temperature through thermostat.
Learn more about temperature here: https://brainly.com/question/24746268
#SPJ12
