When angle ACB is 49 degrees, the approximate distance between A and B is 3420 miles. when angle ACB is 4 degrees, the approximate distance between A and B is 280 miles.
A) For angle ACB = 49 degrees:
Step 1: Convert the diameter of Earth (8000 miles) to its radius, since we'll be working with a circular geometry. The radius of Earth is half the diameter, so it's 4000 miles.
Step 2: Use the formula for finding the arc length (distance between A and B) on a circle, which is:
Arc length = Radius x Angle (in radians)
Step 3: Convert angle ACB from degrees to radians:
Radians = Degrees x (π/180)
Radians = 49 * (π/180) ≈ 0.855 radians
Step 4: Calculate the arc length (distance between A and B):
Arc length = 4000 miles x 0.855 radians ≈ 3420 miles
So, when angle ACB is 49 degrees, the approximate distance between A and B is 3420 miles.
B) For angle ACB = 4 degrees:
Step 1: We already know the radius of Earth is 4000 miles.
Step 2: Convert angle ACB from degrees to radians:
Radians = 4 x (π/180) ≈ 0.070 radians
Step 3: Calculate the arc length (distance between A and B):
Arc length = 4000 miles x 0.070 radians ≈ 280 miles
So, when the angle ACB is 4 degrees, the approximate distance between A and B is 280 miles.
Learn more about distance here:-
https://brainly.com/question/15172156
#SPJ11
what sort of history do we have here? below the unconformity we observed rocks that were strongly deformed, metamorphosed, and partially molten; these things all occur deep within the crust. above the unconformity, we see typical sedimentary rocks that reflect a changing landscape at the surface. using what we've observed and what you know about different rocks, create a logical sequence of events for the great unconformity.
We can find typical sedimentary rocks above the unconformity, which are indicative of the area's history as shifting topography.
The deviation Strongly deformed, metamorphosed, and partly molten rocks were among the phenomena we saw; these occurrences all take place deep inside the crust. Create a plausible timeline of what happened to cause the huge unconformity based on what we have seen so far and your knowledge of the various rocks.
In contrast to metamorphic and igneous rocks, which are generated deep beneath the Earth, sedimentary rocks are formed on or around the surface of the planet. Erosion, weathering, dissolution, precipitation, and lithification are the main geological processes that result in the formation of sedimentary rocks.
Learn more about sedimentary rocks Visit: brainly.com/question/30765754
#SPJ4
Correct Question:
Passage: Below the unconformity we observed rocks that were strongly deformed, metamorphosed, and partially molten; these things all occur deep within the crust. above the unconformity, we see typical sedimentary rocks that reflect a changing landscape at the surface. using what we've observed and what you know about different rocks, create a logical sequence of events for the great unconformity.
what sort of history do we have here?
4.1 Name and Describe FIVE conditions that led to the formation of cyclone Freddy
Answer:
Warm temperature at sea surfaces.
Coriolis force impact area that forms a low-pressure zone.
Atmospheric instability.
Increased humidity in the lower to middle levels of the troposphere.
Low vertical wind shear.
Explanation:
Warm, moist air over the ocean rises due to less density. This air rises up and away from the ocean surface, leaving less air near the surface, creating a low-pressure zone.
Due to the surrounding high-pressure areas, air flows into this low-pressure area and eventually warms up, forming a cycle.
Now, this cycle makes the warm air above the ocean rise and cool the water below to generate clouds. With the constant heating and evaporating process, the entire cloud and wind system spins and grows.
With more speed, cyclone eye formation takes place in the centre. This zone signifies the lowest air pressure and is calm and clear. The high-pressure air from above flows down into this region.
When the wind’s rotating speed reaches 63 kmph, it is called a tropical storm. However, when wind speed reaches 119 kmph, tropical cyclone formation takes place.
Now that you know how a cyclone is formed, let's look at the categories of a cyclone.
There are five conditions that led to the formation of cyclone Freddy is:
Surfaces of the sea are warm.Low-pressure zone created by the Coriolis force impact zone.Unstable atmosphere.Humidity levels in the lower to middle troposphere rising.Minimum vertical wind shear.What is cyclone?An enormous system of winds known as a cyclone spirals inward into an area of low air pressure. High winds, copious amounts of rain, and low atmospheric pressure are the hallmarks of cyclones. Based on their location and strength, cyclones can be divided into distinct types, such as extratropical cyclones, tropical cyclones, and polar cyclones.
There are five conditions that led to the formation of cyclone Freddy is:
DisturbanceWarm sea surface temperaturesLow vertical wind shearHigh accumulated cyclone energyPresence of cold cloud topsAs a result, the significance of the five conditions that led to the formation of cyclone Freddy are the aforementioned.
Learn more about on cyclone, here:
https://brainly.com/question/31848407
#SPJ2
I live in a city with an urban POPULATION of over 8,000,000 people and a population density of over 100 people per square mile. The VEGETATION zone is broadleaf evergreen forest. The CLIMATE here is tropical wet and dry and tropical wet. I live near the Tropic of Capricorn. My dad WORKS in a factory and my brother is a commercial fisherman. I live along the coast of my country. The people LOVE soccer here and this country has even hosted the World Cup for soccer! In which CITY do I live?
Based on the information provided, it seems that you live in Rio de Janeiro, Brazil.
Rio de Janeiro has an urban population of over 8 million people and a population density of over 100 people per square mile. It is located near the Tropic of Capricorn and has a tropical wet and dry climate as well as a tropical wet climate, which is characterized by a distinct rainy season and a dry season. The vegetation zone in Rio de Janeiro is a broadleaf evergreen forest, which is also known as the Atlantic Forest.
Rio de Janeiro is located on the coast of Brazil and is well-known for its beaches, including the famous Copacabana Beach. The city is also famous for its soccer culture and hosted the World Cup for soccer in 1950. Your dad works in a factory, which is a common profession in Rio de Janeiro, and your brother is a commercial fisherman, which is also a common profession in coastal cities like Rio de Janeiro.
Learn more about Rio de Janeiro here:
https://brainly.com/question/22121011
#SPJ11
A sudden movement along the boundary of a tectonic plate is an (blank)?
A sudden movement along the boundary of a tectonic plate is an earthquake.
When there is a sudden movement or shift at the boundary between two tectonic plates, it releases energy in the form of seismic waves, which we feel as an earthquake.
Earthquakes can cause a wide range of destructive effects, including ground shaking, landslides, and tsunamis. The severity of the effects depends on a variety of factors, such as the magnitude of the earthquake, the distance from the epicenter, and the geological features of the area. In areas with poorly constructed buildings and infrastructure, earthquakes can cause significant damage and loss of life. Scientists study earthquakes to better understand the behavior of tectonic plates and to develop strategies for predicting and mitigating their effects. In regions prone to earthquakes, preparedness measures such as earthquake-resistant building design and early warning systems can help minimize the damage and loss of life.
know more about earthquakes:
https://brainly.com/question/248561
#SPJ11
Explain 4 reasons for the impact of marketing partners on the export of a product.
Marketing partners play a crucial role in the success of exporting a product. Here are four reasons why:
1. Local market knowledge
2. Established networks
3. Reduced risk
4. Increased brand awareness
1. Local market knowledge: Marketing partners have an in-depth understanding of the local market and consumer behavior. They can provide valuable insights into cultural nuances, buying habits, and preferences, which can help companies tailor their products and marketing strategies accordingly.
2. Established networks: Marketing partners have established networks of distributors, retailers, and other key players in the local market. Leveraging these networks can help companies gain access to new customers and distribution channels, which is essential for expanding their export business.
3. Reduced risk: Exporting a product comes with various risks, including currency fluctuations, legal compliance, and logistics. Working with a marketing partner can help mitigate some of these risks by sharing the burden of responsibilities and leveraging their expertise in the local market.
4. Increased brand awareness: Marketing partners can help companies build brand awareness and recognition in the local market. They can develop marketing campaigns, promotions, and events that resonate with local consumers and create a positive image of the brand. This, in turn, can lead to increased sales and market share.
In summary, marketing partners can significantly impact the export of a product by providing market knowledge and expertise, access to distribution channels and networks, support for promotional activities, and assistance with regulatory compliance and risk management.
Learn more about exporting here:
https://brainly.com/question/31237663
#SPJ11
In GE, use the Ruler Tool to measure the distance from South America to Africa along the fracture path specified by the yellow thumbtack. Calculate the rate of spreading in cm/year. This will be the distance in centimeters (cm) divided by the age of the crust. Your response ____________
If the distance between South America and Africa is 400 cm and the age of the crust is 10 million years, then the rate of spreading would be 0.04 cm/year (400/10,000,000).
To measure the distance between South America and Africa along the fracture path specified by the yellow thumbtack in GE, we need to use the Ruler Tool. Firstly, select the Ruler Tool from the toolbar, then click on the starting point (South America) and drag the ruler to the endpoint (Africa) along the fracture path specified by the yellow thumbtack.
To calculate the rate of spreading, we need to divide the distance in centimeters by the age of the crust. The age of the crust can be determined using geological studies.
In conclusion, by using the Ruler Tool in GE and dividing the distance in centimeters by the age of the crust, we can calculate the rate of spreading between two continents. This information is essential in understanding the process of plate tectonics and the movement of the Earth's crust.
To know more about geological visit:
https://brainly.com/question/13497111
#SPJ11
In which two ways are a ground blizzard and a snow squall alike?
A) Both are associated with strong cold fronts. B) Both are long-lasting storms. C) Both develop with very little snowfall. D) Both originate in the Gulf Of Mexico. E) Both occur only in the Midwest
The two ways in which a ground blizzard and a snow squall are alike is A) Both are associated with strong cold fronts.
What is a ground blizzard ?Blasts of wind during a ground blizzard cause any accumulated snow to churn up and reduce visibility while driving, creating hazardous conditions. Typically resulting after heavy snowfall has already occurred, these sudden weather events pose an additional threat to those traveling on the roads.
Distinct from this terrifying phenomenon is the less predictable yet equally dangerous occurrence of a snow squall. These intense spurts of icy precipitation come with decreased levels of vision, squarely increasing the potential for danger especially when activated by strong cold fronts that sweep through a particular area in rapid succession.
Find out more on ground blizzards at https://brainly.com/question/31535676
#SPJ1
Monopolist competition is seperated from pure of perfect competition by......
-
-profit motive
-product differentiation
-inadequate competition
-oligopolies
Monopolistic competition is separated from pure or perfect competition by product differentiation.
In a monopolistically competitive market, firms produce differentiated products, which means that each firm has some degree of market power to charge a slightly higher price than competitors. This differs from perfect competition, where all firms produce identical products and have no market power.
Hope that helps! Good luck! :)
Monopolistic competition is separated from pure or perfect competition by product differentiation. In pure or perfect competition, all firms in the market produce homogenous goods and have no control over the price.
On the other hand, monopolistic competition has firms that produce slightly different products, and they have a certain level of control over the price of their products. This is because consumers may be willing to pay more for a particular product, even if it is similar to another.
Moreover, in monopolistic competition, firms have a profit motive, which drives them to produce the best possible product and to be efficient in their production. Inadequate competition and oligopolies are characteristics of other market structures such as monopolies and oligopolies, respectively.
In conclusion, product differentiation is the main characteristic that distinguishes monopolistic competition from pure or perfect competition. This differentiation allows firms to have some control over price and to strive for profits, which is not the case in pure or perfect competition.
To know more about Monopolistic competition visit:
https://brainly.com/question/28189773
#SPJ11
To produce a commercially viable oil deposit, there must be a source rock, a reservoir rock, a seal rock, and a(n) ________.group of answer choices igneous heater rock that heats the oil and gives it buoyancy large fracture connecting the reservoir rock to the surface of the earth trap that denies the oil passage to the surface porous filter rock that removes impurities
To produce a commercially viable oil deposit, there must be a source rock, a reservoir rock, a seal rock, and a trap. It denies the oil passage to the surface. The trap is necessary to keep the oil contained within the reservoir rock and prevent it from escaping to the surface.
The source rock is where the oil is formed and the reservoir rock is where it accumulates. The seal rock is impermeable and prevents the oil from migrating out of the reservoir. The presence of all four components is necessary for the formation and retention of a commercially viable oil deposit.
Know more about oil deposits:
https://brainly.com/question/26597747
#SPJ11
To produce a commercially viable oil deposit, there must be a source rock, a reservoir rock, a seal rock, and a trap that denies the oil passage to the surface.
The source rock is typically a sedimentary rock rich in organic materials, which under heat and pressure, generate hydrocarbons like oil and gas. The reservoir rock is a porous and permeable rock that stores the hydrocarbons, allowing them to flow through its interconnected pore spaces. Common reservoir rocks include sandstones and limestones.
The seal rock is an impermeable layer that prevents the hydrocarbons from escaping and migrating to the surface. Seal rocks, often made of shale or mudstone, create a barrier that keeps the hydrocarbons within the reservoir rock. Lastly, the trap is a crucial geological feature that stops the oil from reaching the surface. Various types of traps can be found, including structural traps (formed by deformation, such as folds and faults) and stratigraphic traps (created by changes in rock properties like permeability).
Together, these elements make up a complete petroleum system, which is necessary for the formation of a commercially viable oil deposit. Without any of these components, the oil may not accumulate in significant quantities, or it may not be economically feasible to extract it.
Therefore the correct answer is a trap that denies the oil passage to the surface.
Learn more about source rock here:
https://brainly.com/question/31801503
#SPJ11
How has art of the kushan empire influenced some modern representations of the buddha?
The art of the Kushan Empire, which existed from the 1st to the 3rd century CE, played a significant role in shaping the representation of the Buddha in the region. The Kushan Empire was a major center of Buddhist art and culture, and its art featured a unique blend of Indian, Greco-Roman, and Central Asian influences.
One of the most significant contributions of the Kushan Empire to the representation of the Buddha was the depiction of the Buddha in human form. Prior to this, the Buddha was often represented symbolically, such as through the wheel or the bodhi tree. However, the Kushan art introduced the concept of anthropomorphic representations of the Buddha, which became popular in the region and beyond.
The Kushan art also depicted the Buddha with Greek-inspired features, such as wavy hair, curly beard, and a toga-like garment. These features were later adopted by other Buddhist art traditions, including the Gandharan and Gupta art of India, and influenced the development of the iconic image of the Buddha that is widely recognized today.
To know more about Kushan Empire here
https://brainly.com/question/9357030
#SPJ4
The amount of uniformity in the size of rock or sediment particles is called
The amount of uniformity in the size of rock or sediment particles is known as the sorting.
Sorting is an important characteristic of sedimentary rocks as it helps geologists understand the depositional environment and the processes that took place during the formation of the rock. Sedimentary rocks that have well-sorted particles indicate that they were deposited in an environment with steady currents, where the particles were transported and deposited uniformly based on their size.
On the other hand, sedimentary rocks with poorly sorted particles indicate that they were deposited in an environment with varying currents, where particles of different sizes were deposited in the same location. Sorting can also be used to determine the energy level of the environment where the sediment was deposited. High energy environments, such as fast-flowing rivers or strong ocean currents, will cause the particles to become more poorly sorted, while low energy environments such as lakes or quiet ocean bays will result in better sorted particles.
Therefore, the degree of sorting can provide important clues about the past environments in which the sedimentary rock was formed.
Learn more about sedimentary rocks here:
https://brainly.com/question/10709497
#SPJ11
if the composition of the upper atmosphere were altered to permit a greater amount of terrestrial radiation to escape, earth would be group of answer choices quite unaffected. warmer. cooler. none of the above
Earth would be warmer if changes were made to the upper atmosphere's chemical makeup to allow more terrestrial radiation to escape. Option 2 is Correct.
Earth's thermal energy, which manifests as infrared waves, is known as terrestrial radiation. The temperature on Earth would drop as a result of heat loss if the composition of the atmosphere were altered to allow more terrestrial radiation to escape.
Methane, ozone, nitrous oxide, and water vapour are a few of them. Earth would be an ice wasteland if there were no greenhouse gases. By retaining a portion of the heat energy that would otherwise escape into space, greenhouse gases make our world habitable. Option 2 is Correct.
Learn more about atmosphere Visit: brainly.com/question/31211690
#SPJ4
Correct Question:
If the composition of the upper atmosphere were altered to permit a greater amount of terrestrial radiation to escape, earth would be group of answer choices
1. quite unaffected.
2. warmer.
3. cooler.
4. none of the above.
Structures that result from the emplacement of magma into preexisting rocks are called ________. plutons host rock country rocks extrusions
Answer:
Structures that result from the emplacement of magma into preexisting rocks are called plutons.
Structures that result from the emplacement of magma into preexisting rocks are called plutons.
Plutons form when magma intrudes and solidifies within the Earth's crust, creating large bodies of intrusive igneous rock. These formations can vary in size and shape, ranging from small to massive batholiths.
The preexisting rocks that the magma intrudes into are known as country rocks or host rocks. As the magma cools and crystallizes, it may cause contact metamorphism in the surrounding country rocks due to the high temperature and pressure conditions. This results in the formation of a metamorphic aureole around the pluton.
Extrusions, on the other hand, refer to igneous formations that occur when magma reaches the Earth's surface, such as volcanic eruptions or lava flows. Unlike plutons, extrusions are formed through extrusive processes and result in volcanic landforms like volcanoes, lava domes, and volcanic plateaus.
Learn more about batholiths here: https://brainly.com/question/29220457
#SPJ11
How many triangles can be desert with the side lengths 4 centimeters, 4. 5 centimeters and 9 centimeters
Since the sum of any two sides must be greater than the length of the third side, no triangle can be formed with the given side lengths.
We can check if the given sides can form the triangles or not when the sum of two sides are always greater than the third side.
The given three sides are 4 centimeters, 4. 5 centimeters and 9 centimeters.
So 4 + 4.5 = 8.5 < 9
This defies the Triangle Inequality Theorem, which stipulates that the length of the third side must be bigger than the sum of any two sides of a triangle.
Since the the sum of 4 and 4.5 is less than the 9 so the given sides cannot be form the triangle.
To learn more about Triangle Inequality Theorem link is here
brainly.com/question/1163433
#SPJ4
Examples of agricultural modernization in south sudan
Agricultural modernization in South Sudan is aimed at increasing food production and enhancing food security. The government has implemented several programs to support modernization, including irrigation, mechanization, and extension services.
One example of modernization is the use of solar-powered irrigation systems to increase crop yields in areas with limited rainfall. Another example is the introduction of tractors and other farm machinery to reduce labor costs and improve efficiency.
The government has also established agricultural extension services to provide farmers with information on modern farming techniques and market opportunities.
Additionally, there has been a push towards commercial farming, with the government offering incentives for investors to establish large-scale farms. These efforts are aimed at increasing agricultural production and improving livelihoods for the rural population.
To know more about irrigation systems visit:
https://brainly.com/question/18599102
#SPJ11
This geophysical data is used to assess the ______ in a basin. This information is then used groundwater in the basin
The geophysical data is used to assess the groundwater resources in a basin. This information is then used to manage and monitor groundwater in the basin.
Geophysical data plays a vital role in both assessing and managing groundwater resources in a basin. Using techniques such as electrical resistivity, seismic, and magnetic surveys, geophysicists can identify and characterize aquifers and their properties. Once the groundwater resources are assessed, it is crucial to implement sustainable management practices to prevent over-pumping and contamination. This includes setting up monitoring systems to measure groundwater levels, quality, and flow rates, and implementing measures to protect the resource. By effectively managing groundwater resources, we can ensure their long-term availability for human consumption, agriculture, and industry.
Know more about groundwater resources:
https://brainly.com/question/10557415
#SPJ11
This geophysical data is used to assess the subsurface structure and properties in a basin.
By analyzing various geophysical measurements, such as electrical resistivity, seismic reflection, and gravity anomalies, geoscientists can create a detailed picture of the subsurface geology, including the distribution of rocks, sediments, and fluids.
This information is then used to better understand the hydrogeology of the basin, particularly the distribution and movement of groundwater. For example, if the geophysical data indicates the presence of a thick layer of impermeable rock, it may suggest that groundwater is not able to flow freely through that layer. Conversely, if the data shows a highly conductive zone, it may suggest the presence of a large aquifer that could provide a sustainable water supply.
Overall, geophysical data plays a critical role in helping to manage and protect groundwater resources, which are essential for many human and ecological needs.
Learn more about groundwater resources here:
brainly.com/question/10557415
#SPJ11
Leopard seals spend the summer months hunting in the water around antarctica. in the winter the seals spend their time on sub antarctic island and occasionally on the southern most parts of argentina chile australia and new zealand
Leopard seals, known for their distinctive spotted coat, spend the summer months hunting in the waters around Antarctica.
They are apex predators and feed on krill, fish, and other marine animals. In the winter, leopard seals migrate to sub-Antarctic islands where they breed and molt.
These islands provide a safe haven from predators such as killer whales, which prey on leopard seals. Occasionally, some seals may venture as far as the southernmost parts of Argentina, Chile, Australia, and New Zealand during the winter months.
However, these sightings are rare, as leopard seals prefer to spend most of their time in the colder waters of the Southern Ocean.
The migration and feeding patterns of leopard seals are important indicators of the health of the Antarctic marine ecosystem, and scientists continue to study their behavior to better understand this unique species.
To know more about apex predators visit:
https://brainly.com/question/14810553
#SPJ11
You are part of a team that’s researching the carbon intensity of Accenture’s supplier companies. The team is calculating the existing carbon emissions of these companies and finding ways to reduce the emissions. Which of Accenture’s sustainability growth priorities are you addressing through this project?
Accenture intends to reduce its waste and carbon emissions in order to meet its environmental targets.
By 2025, Accenture plans to achieve net-zero emissions. The business is doing this by spending money on carbon offsetting, energy efficiency, and renewable energy.
Accenture has vowed to produce no waste by 2025. To do this, the business recycles and composts all of its trash and makes an effort to produce less waste in the first place. Additionally, they have promised to achieve water neutrality by 2025. In order to do this, the business employs water-saving fixtures and equipment and makes an effort to consume less water overall.
Learn more about Accenture's sustainability goals here:
https://brainly.com/question/30089905
#SPJ12
What will happen if the yellowstone volcano erupts?.
Answer:
If another large, caldera-forming eruption were to occur at Yellowstone, its effects would be worldwide. Such a giant eruption would have regional effects such as falling ash and short-term (years to decades) changes to global climate.
Hope this helps :)
Pls brainliest...
A tabletop in the shape of a trapezoid has an area of 8,340 square centimeters. Its longer base measures 135 centimeters, and the shorter base is 105 centimeters. What is the height?
The height of the trapezoid-shaped tabletop is 69.5 centimeters. The area of a trapezoid can be calculated using the formula.
Area = (1/2) * (Base1 + Base2) * Height
In your problem, you've provided the area as 8,340 square centimeters, the longer base (Base1) as 135 centimeters, and the shorter base (Base2) as 105 centimeters. We can use this information to solve for the height (h).
8,340 = (1/2) * (135 + 105) * Height
First, we'll add the two bases together:
8,340 = (1/2) * (240) * Height
Next, we'll multiply 240 by 1/2:
8,340 = 120 * Height
Now, to find the height, we'll divide both sides by 120:
Height = 8,340 / 120
Height = 69.5 centimeters
To know more about trapezoid visit:
https://brainly.com/question/31380175
#SPJ11
Before European settlers arrived the Great Plans of North America were
Answer: the grazing area of huge herds of buffalo and the home of native groups.
Explanation: Hope this answers your question! :)
Market research reports and profiles of voting districts like those shown are examples of spatial analysis products. Which of the following data sources is most frequently used to create the spatial analysis products shown in the examples?
Answer:
Explanation:
where are the example
s
The most frequently used data source to create spatial analysis products like market research reports and profiles of voting districts is remotely sensed data.
What's the research about?Remotely sensed data is collected from satellites or aircraft and can be used to map a variety of features, including land cover, population density, and transportation networks.
This data is often used in conjunction with other data sources, such as census data and survey data, to create more comprehensive spatial analysis products.
Learn more about market
https://brainly.com/question/25369230
#SPJ2
What forces have helped shape landforms in Africa South of the Sahara?
plateausplateausThe region of southern Africa is dominated by the Kaapvaal craton, a shelf of bedrock that is more than 2.6 billion years old. Rocky features of southern Africa include plateaus and mountains, such as the Drakensberg range.
please make me brainalist and keep smiling dude I hope you will be satisfied with my answer is updated
Answer:
Plateaus
Explanation:
Africa is made up of mostly Plateaus
Precautions to take during the midst of a tropical cyclone
Precautions to take during the midst of a tropical cyclone are to stop driving, disconnect the electrical appliances, and stay indoors.
A spiral formation of thunderstorms resulting in torrential rain and squalls, a low-pressure centre, and strong winds are the characteristics of a tropical cyclone, a fast revolving storm system.
Avoid driving since the roads will be slick and it will be difficult to maintain control of the car in the wind. To prevent short circuits and damage, you should turn off the gas and unplug the electrical appliances. Shut your windows and doors with shutters while remaining inside the house.
To learn more about tropical cyclone here
brainly.com/question/26832152
#SPJ4
Paragraph 1: Why do tropical cyclones develop in late summer? • What is the impact of coriolis force and latent heat on the development of tropical cyclones? Discuss the stage of development of the tropical cyclone under research. Why can category 1 tropical cyclones be more destructive (damaging) than category 5 tropical cyclones loodu Use the S
Tropical cyclones typically develop during late summer months, due to warm ocean temperatures that serve as fuel for the storms.
What is the impact of the Coriolis force?The Earth's rotation generates the Coriolis force, which creates a low-pressure region inducing convective activity via the infusion of humid air.
This process is sustained by latent heat resulting from water vapor condensation, leading subsequently to intensification in its ferocity.
Initially, tropical depressions are composed of conflicting winds up to 38 mph and possess closed circulation characteristics. As they gradually advance into hurricanes or tropical storms, the winds gain momentum making the storm progressively more nuanced with distinct attributes, such as an “eye.”
Severe Category 1 typhoons can prove more destructive than even Category 5 events, confounded due to their smaller size concentrated damage-region.
Read more about tropical cyclones here:
https://brainly.com/question/1222463
#SPJ1
What are three countries of the tropic of cancer crosses
The three countries of the tropic of cancer crosses are ;
EgyptMexicoIndiaWhat are these countries?The Tropic of Cancer is an imaginary line located at approximately 23.5 degrees north of the equator. It crosses several countries around the world, are been discussed.
Mexico: The Tropic of Cancer passes through several states in Mexico, including Baja California Sur, Sinaloa, Durango, Zacatecas, San Luis Potosi, Hidalgo, Puebla, and Veracruz: In India, the Tropic of Cancer passes through eight states including Gujarat, Rajasthan, Madhya Pradesh, Chhattisgarh, Jharkhand, West Bengal, Tripura, and Mizoram.Egypt where the Tropic of Cancer passes through the northern part of Egypt, including the cities of Cairo and Alexandria.
Learn more about cancer at:
https://brainly.com/question/11710623
#SPJ1
Moving forward, petroleum faces an uncertain future. Explain petroleum futures, using correct terminology to describe what is currently known about the petroleum supply, and apply this knowledge to a discussion of the future of renewable resources. Your response should be one paragraph in length.
Please help!!
Petroleum futures are uncertain due to several factors. The supply of petroleum is limited and non-renewable, which means that it will eventually become depleted. Moreover, the demand for petroleum is expected to decrease due to the growing awareness of the environmental impacts of fossil fuels and the increasing adoption of renewable energy sources. The future of renewable resources is promising as technology advances and economies of scale make it more cost-effective. Renewable resources such as solar, wind, and hydropower have the potential to become the primary source of energy in the future. However, their widespread adoption will require significant investment and policy support to overcome the infrastructure and market barriers. Therefore, it is essential to accelerate the transition to a renewable energy future to ensure energy security, reduce greenhouse gas emissions, and mitigate the impacts of climate change.
Hope that helps! Have a nice day! :)
______ contributes to the nitrogen cycle by removing nitrogen from the air and converting it into a form that is usable by plants.
Nitrogen fixation contributes to the nitrogen cycle by removing nitrogen from the air and converting it into a form that is usable by plants.
The nitrogen cycle is aided by nitrogen fixation which takes nitrogen from the air and transforms it into a form that can be utilized by plants. In this procedure, nitrogen fixing bacteria in the soil or in the root nodules of leguminous plants are essential.
These microorganisms change nitrogen gas into ammonium ions , which can be taken up by plant roots and used to assemble proteins and other crucial molecules. Nitrogen cycle is the procedure that the statement refers to. The majority of living things cannot directly use the nitrogen gas that makes up 78% of the Earth's atmosphere.
Learn more about nitrogen cycle at:
brainly.com/question/13518371
#SPJ4
One side of a square has endpoints (4,7) and (-3,5). What is the perimeter of the square?
The perimeter of the square is 4√53.
The endpoints of square is (4,7) and (-3,5).
The distance between the two ends is the side of the square. The distance formula can be used to determine this:
d = √((x₂ - x₁)² + (y₂ - y₁)²)
From the given points, x₁ = 4, x₂ = -3, y₁ = 7, and y₂ = 5.
Now substitute the values.
d = √((-3 - 4)² + (5 - 7)²)
Simplify
d = √(-7)² + (-2)²
d = √49 + 4
d = √53
The square's side is therefore √53.
Since the square have four side and all sides are equal. So the square's circumference is 4√53.
To learn more about perimeter link is here
brainly.com/question/30252651
#SPJ4
Which rivers were essential to settlement in China?
Answer:
The two rivers that were essential to settlement in China are the Yellow River (Huang He) and the Yangtze River.
