If M = 1.1 kg, what is the tension in string 1?
1) 54 N
2) 47 N
3) 40 N
4) 62 N
5) 57 N

Answer:an increase (or decrease) in the frequency of sound, light, or other waves as the source and observer move toward (or away from) each other.

Explanation:

The grindstone will come to a momentary stop in situations 1 and 3, but not in situation 2.

To determine whether the grindstone will come to a momentary stop, we need to find the time t at which its angular velocity reaches zero, using the equation:

ω = ω0 + αt

If there is a real positive solution for t, then the grindstone will come to a momentary stop at that time.

Situation 1:

ω0 = 5 rad/s

α = -2 rad/s^2

ω = ω0 + αt

0 = 5 rad/s - 2 rad/s^2 * t

t = 2.5 s

Since t is a positive real number, the grindstone will come to a momentary stop.

Situation 2:

ω0 = 8 rad/s

α = 0 rad/s^2

ω = ω0 + αt

ω = 8 rad/s

Since α is zero, the angular velocity will remain constant at 8 rad/s and the grindstone will not come to a momentary stop.

Situation 3:

ω0 = -4 rad/s

α = 3 rad/s^2

ω = ω0 + αt

0 = -4 rad/s + 3 rad/s^2 * t

t = 4/3 s

Since t is a positive real number, the grindstone will come to a momentary stop.

Therefore, the grindstone will come to a momentary stop in situations 1 and 3, but not in situation 2.

To learn more about momentary visit:

https://brainly.com/question/30792404

#SPJ11

The most likely cause of ring down artifact is d. reflection. This type of artifact occurs when a series of reflections happen between two closely spaced parallel surfaces.

When a person conducts a thorough scientific study of human history or produces data as a result of such study, that individual is referred to as an archaeologist. Archaeology is the field of study that an archaeologist pursues.

In archaeology, the fossils that the archaeologist finds while excavating a site are used to aid in the study. They may uncover the remains of ancient humans or any other living species while excavating the site, including jewellery, utensils, bones, and a variety of other items reflections. The methods employed by archaeologists to conduct research are referred to as radiocarbon dating, often known as carbon dating. Creating an image with multiple parallel lines extending downward from the actual structure.

Learn more about Archaeology here

https://brainly.com/question/17362933

#SPJ11

The unknown mass given the force of the elevator on the 5.0-kg mass is 80 N up is 3.3 kg. The correct option is 1.

To determine the unknown mass, we'll use the following terms: force, mass, acceleration, and Newton's second law (F = m * a).

First, we'll find the net force acting on the 5.0-kg mass:
Net force = Force of elevator - Gravitational force (F = m * g, g = 9.8 m/s²)
Net force = 80 N - (5.0 kg * 9.8 m/s²) = 80 N - 49 N = 31 N

Since the elevator is accelerating downward, the net force should be negative, thus:
Net force = - (5.0 kg * a)
-31 N = - (5.0 kg * 1.0 m/s²)
31 N = 5.0 kg * 1.0 m/s²

Now, let's consider the system of the unknown mass (m) and the 5.0-kg mass. The total force acting on the system is the gravitational force:
Total force = (5.0 kg + m) * 9.8 m/s²

As the net force is 31 N, we can write:
31 N = (5.0 kg + m) * 9.8 m/s²
m = (31 N / 9.8 m/s²) - 5.0 kg ≈ 3.16 kg

The closest answer is 1) 3.3 kg.

For more such questions on Force.

https://brainly.com/question/8125804#

#SPJ11

If you touch the ball of a charged electroscope with your finger, the electroscope will discharge.

This is because your body acts as a conductor, and when you touch the ball of the electroscope, the excess charge on the ball will flow through your body to the ground, neutralizing the electroscope's charge.

Before you touch the electroscope, the ball would have been charged, causing the metal leaves of the electroscope to repel each other and spread apart.

This is because the like charges on the metal leaves are trying to move away from each other, due to the repulsive force between them.

When you touch the ball with your finger, some of the excess charge will flow through your body and to the ground, leaving the electroscope with a reduced charge or no charge at all.

As a result, the metal leaves will move closer together, indicating that the electroscope is no longer charged.

To know more about electroscope here

https://brainly.com/question/31030885

#SPJ11

The United States uses the Fahrenheit scale in everyday life to measure temperature. The Fahrenheit scale is a temperature scale that was proposed by the German physicist Daniel Gabriel Fahrenheit in 1724. In this scale, the freezing point of water is 32°F and the boiling point is 212°F at standard atmospheric pressure. The scale is divided into 180 equal parts between these two points.

The Fahrenheit scale is still used in the United States to measure everyday temperatures, such as the temperature of the air or the temperature of liquids. However, many other countries and scientific fields use the Celsius scale, which is a metric temperature scale based on the freezing and boiling points of water, with 0°C representing the freezing point and 100°C representing the boiling point at standard atmospheric pressure.

It's important to note that both the Fahrenheit and Celsius scales are widely recognized and used around the world, but they represent different temperature ranges and units. It is possible to convert between the two scales using mathematical formulas or conversion charts.

Learn more about temperatures here:

https://brainly.com/question/24746268

#SPJ11

The number of gas molecules is equal to  3.26 x [tex]10^{11[/tex] molecules per liter volume.

To determine the number of gas molecules present per liter volume at the given pressure and temperature, we will use the Ideal Gas Law and Avogadro's number.
Ideal Gas Law: PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, convert the pressure from mm of Hg to atm:
(1.0 x [tex]10^{-7[/tex] mm Hg) * (1 atm / 760 mm Hg) = 1.32 x [tex]10^{-10[/tex] atm
Now, let's use the Ideal Gas Law to find the number of moles (n) in 1 liter of volume:
n = PV / RT
n = (1.32 x  [tex]10^{-10[/tex]  atm)(1 L) / (0.0821 L atm/mol K)(293 K)
n = 5.42 x [tex]10^{-13[/tex]  mol
Finally, use Avogadro's number (NA = 6.02 x [tex]10^{23[/tex]) to find the number of gas molecules in 1 liter of volume:
Number of gas molecules = n * NA
Number of gas molecules = (5.42 x [tex]10^{-13[/tex] mol)(6.02 x [tex]10^{23[/tex])
Number of gas molecules ≈ 3.26 x [tex]10^{11[/tex] molecules per liter volume

Learn more about Ideal Gas Law :

https://brainly.com/question/28257995

#SPJ11

Answer:

False.

The fundamental frequency of a person's speech, also known as the pitch or F0, can vary depending on various factors such as age, gender, emotion, and cultural background. However, studies have shown that the fundamental frequency tends to increase, rather than decrease, when a person is angry or excited. This increase in pitch during intense emotions is thought to be due to changes in the tension of the vocal cords and increased respiratory activity.

Explanation:

The speed of the object is 6 m/s when it reaches a location where the electric potential is 3 volts.

To find the speed of the 2-kg object with a charge of 2 c when it reaches a location with an electric potential of 3 volts, we can use the conservation of energy equation,

1/2 [tex]mv^2[/tex] + qΔV = constant

where m is the mass of the object, v is its speed, q is its charge, ΔV is the change in electric potential, and the constant represents the initial energy of the object.

At the initial location where the object was released, the electric potential was 11 volts. Therefore, the initial energy of the object is,

E1 = qV1 = 2 c x 11 V = 22 J

At the location where the electric potential is 3 volts, the final energy of the object will be,

E2 = qV2 = 2 c x 3 V = 6 J

Since the energy is conserved, we can set E1 equal to E2,

1/2 [tex]mv^2[/tex] + qV1 = qV2

Solving for v, we get:

v = √(2q/m)(V1 - V2)

Plugging in the given values, we get:

v = √(2 x 2 C / 2 kg)(11 V - 3 V) = 6 m/s

Therefore, the speed of the object is 6 m/s.

Know more about the Conservation of energy here :
https://brainly.com/question/31514742

#SPJ11

-2*m*v*d is the rotational momentum of the system.

Hence, the correct option is C.

We are taking the location of particle 5 as the reference point for all angular momentum calculations, the angular momentum of the system can be found by calculating the angular momentum of each particle about particle 5 and adding them.

Let the mass of each particle is "m", and their velocities are v1, v2, v3, v4, v5, and v6, respectively, and their positions relative to particle 5 are d1, d2, d3, d4, d5, and d6, respectively, the angular momentum of each particle about particle 5 can be calculated as

Where

L1 = m * (r1 x v1), where r1 = d1 - d5

L2 = m * (r2 x v2), where r2 = d2 - d5

L3 = m * (r3 x v3), where r3 = d3 - d5

L4 = m * (r4 x v4), where r4 = d4 - d5

L5 = 0, where r5 = d5-d5 = 0, since the reference point is particle 5

L6 = m * (r6 x v6), where r6 = d6 - d5

The total angular moment of the system is defined by the vector sum of these
L = L1 + L2 + L3 + L4 + L5 + L6

We didn't know the values of the velocities and position of the particle so, we can't determine the value of L. However, we can eliminate the option A and B.

Hence, the angular momentum of the system can't not be negative or zero as defined in specific direction.
Hence, the correct option is C.

To know more about rotational momentum here
https://brainly.com/question/29803113
#SPJ4

True. Artifacts can occur when the dimensions of the sound beam area are larger than the dimensions of the reflectors in the body.

This is because the larger sound beam area may cause false reflections or echo signals, leading to inaccurate imaging or interpretation. Theoretically, an image artifact can be defined as any discrepancy between the reconstructed values in an image and the true attenuation coefficients of the object. Artifact is a term that describes a degraded picture (digital image) where small areas of the picture have obvious localised islands of distortion or blocky spots of off-color pixels. A similar phenomenon occurs as a halo around some objects in the picture where there are sharp edges.

Learn more about artifact here: https://brainly.com/question/30644477

#SPJ11

The property that is detectable for both dark matter and the supermassive black hole at the center of the Milky Way is their gravitational influence on surrounding matter.

Both dark matter and the supermassive black hole affect the motion of nearby stars and galaxies due to their gravitational pull, even though they cannot be directly observed through electromagnetic radiation like visible light.

By studying the movement and behavior of objects in their vicinity, scientists can infer the presence and properties of both dark matter and the supermassive black hole.

Thus, the property is their gravitational influence on surrounding matter.

To know more about supermassive black hole click here:

https://brainly.com/question/16470114

#SPJ11

To find the wrecking ball's speed at the lowest point which is suspended from a 5.0 m long cable that makes a 30 degree angle with the vertical. The ball is released and swings down.

To solve this problem, we can use conservation of energy. At the highest point, all of the ball's energy is potential energy (PE=mgh), where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball above its lowest point. At the lowest point, all of the ball's energy is kinetic energy (KE=1/2mv^2), where v is the speed of the ball.

Since energy is conserved, we can set the initial potential energy equal to the final kinetic energy:

mgh = 1/2mv^2

We can cancel out the mass m from both sides, and solve for v:

v = sqrt(2gh)

To find h, we need to use trigonometry to find the height of the lowest point above the ground. The horizontal distance from the point where the ball is released to the point where it reaches its lowest point is given by:

5.0 m * sin(30 degrees) = 2.5 m

The vertical distance from the release point to the lowest point is given by:

5.0 m * cos(30 degrees) = 4.3 m

Therefore, the total height of the lowest point above the ground is:

h = 4.3 m - 0.5 m = 3.8 m

(where we subtract 0.5 m because the ball has a radius of 0.5 m)

Now we can plug in the values for g and h and solve for v:

v = sqrt(2 * 9.81 m/s^2 * 3.8 m) = 3.1 m/s

Therefore, the answer is D) 3.1 m/s.

The frictional force of the floor on a large suitcase is least when the suitcase is:
Your answer: The frictional force of the floor on a large suitcase is least when the suitcase is rolling on its wheels. his is because static friction, which is the force that keeps the suitcase from moving when it is at rest, is generally greater than kinetic friction, which is the force that opposes the motion of the suitcase when it is moving. Therefore, once the suitcase overcomes the static friction and begins to move, the frictional force of the floor on the suitcase decreases.

1. Understand the different types of friction: static friction, kinetic friction, and rolling friction.
2. Recognize that when a suitcase is rolling, it experiences rolling friction, which is typically less than static and kinetic friction.
3. Identify that when the suitcase is on its wheels, it is rolling and therefore experiencing the least amount of frictional force from the floor.

To know more about static friction and kinetic frcition:

https://brainly.com/question/30886698

#SPJ11

The speed of the ball is constant, but its direction changes constantly, causing a constant tangential acceleration towards the center of the circle.

A. Velocity: Changing, as the direction of velocity is constantly changing as the ball moves in a circle.

B. Angular velocity: Constant, as the ball takes the same time to complete each rotation.

C. Centripetal acceleration: Constant, as the speed of the ball is constant, but the direction of motion changes, which causes the direction of acceleration to change.

D. Angular acceleration: Zero, as the angular velocity is constant and there is no change in its magnitude or direction.

E. Tangential acceleration: Constant, as the speed of the ball is constant, but its direction changes constantly, causing a constant tangential acceleration towards the center of the circle.

To learn more about Constant visit:

https://brainly.com/question/1597456

#SPJ11

If a star has a parallax angle of one arc second, it is located at a distance of 3.26 light years from Earth.

A parallax angle of one arc second means that the angle between the position of an object in space when viewed from two different points in Earth's orbit is one second of arc. This angle is used to measure the distance to stars using the principle of triangulation. The distance to a star is inversely proportional to its parallax angle, so the larger the parallax angle, the closer the star is.

To calculate the distance in light years for a parallax angle of one arc second, we can use the formula:

distance (in parsecs) = 1 / parallax angle (in arc seconds)

We then convert parsecs to light years using the conversion factor of 3.26 light years per parsec. Therefore, the distance in light years for a parallax angle of one arc second is:

distance = 1 / 1 arc second = 1 parsec
distance in light years = 1 parsec x 3.26 light years/parsec = 3.26 light years

This is a relatively close distance in astronomical terms, considering that the nearest star to our solar system, Proxima Centauri, has a distance of about 4.2 light years.

For more such questions on Parallax angle.

https://brainly.com/question/3836636#

#SPJ11

The angular velocity of the point mass is 4.

To solve this problem, we can use the conservation of angular momentum.

The angular momentum of the system is given by L = I * W, where I is the moment of inertia of the point mass and W is its angular velocity.

Since the mass is rotating horizontally at the end of a string, its moment of inertia is I = [tex]MR^{2}[/tex].

When the string is pulled in, the radius decreases to R/2.

At this point, the moment of inertia becomes I' = M[tex](R/2)^{2}[/tex] = [tex]MR^{2/4}[/tex].

Since angular momentum is conserved, we can equate L = L'.

I * W = I' * W'

Substituting the values of I, I', and rearranging for W'.

W' = ([tex]MR^{2}[/tex] /[tex]MR^{2/4}[/tex]) * W

W' = 4W

So the final angular velocity of the point mass is 4 times its original angular velocity.

In summary, the angular velocity of a point mass rotating horizontally at the end of a string with a radius R and angular velocity W decreases to 1/4th when the radius decreases to R/2. This is because of the conservation of angular momentum, which states that the angular momentum of a system remains constant when there is no net external torque acting on it.

know more about angular velocity here:

https://brainly.com/question/29566139

#SPJ11

The radius of an orbit of a satellite that orbits Jupiter once every 16.7 hours  is approximately 2.67 x 10^5 meters.

We'll use the following terms in our calculations: orbital period (T), gravitational constant (G), mass of Jupiter (M), and the radius of the orbit (r).

First, convert the orbital period (T) to seconds:
T = 16.7 hours * (3600 seconds/hour) = 60,120 seconds

Next, use the gravitational constant (G):
G = 6.674 × 10^(-11) m³ kg^(-1) s^(-2)

Recall the mass of Jupiter (M):
M = 1.90 x 10^27 kg

Use Kepler's Third Law to find the semi-major axis of the orbit (a), which is approximately equal to the radius (r) for a circular orbit:
T² = (4π² / GM) * r³

Solve for r:
r³ = (T² * GM) / (4π²)
r³ = (60,120² * 6.674 × 10^(-11) * 1.90 x 10^27) / (4π²)
r³ = 1.898 × 10^16 m³

Finally, find the cube root of r³ to get r:
r = (1.898 × 10^16)^(1/3)
r ≈ 2.67 x 10^5 m

The radius of the satellite's orbit around Jupiter is approximately 2.67 x 10^5 meters.

More on satellite's orbit: https://brainly.com/question/31088912

#SPJ11

The correct answer is c. 2.

This is because power is equal to torque multiplied by angular velocity. The torque required by the ice cream machine remains constant regardless of the radius at which it is applied, but the angular velocity changes.

Since the operator is applying the torque at half the radius, the angular velocity is doubled to maintain the same amount of work. This means that the power expended by the operator is also doubled, resulting in an answer of 2 times the power.
When the operator applies the same torque at half the radius, they must apply twice the force to maintain the same torque. Since power is the product of force and velocity, and the operator is applying the force in the same amount of time, the power expended by the operator is 2 times greater.

To know about Torque please click:-

https://brainly.com/question/19247046

#SPJ11

A 0.25 m radius grinding wheel  rotating with a constant angular speed of 2.0 rad/s has a  tangential speed at the edge of the wheel of 0.5 m/s.

The tangential speed at the edge of the grinding wheel can be found using the formula:

Tangential speed = radius x angular speed

Plugging in the given values, we get:

Tangential speed = 0.25 m x 2.0 rad/s
Tangential speed = 0.5 m/s

Therefore, the tangential speed at the edge of the wheel is 0.5 m/s.

Alternatively, to find the tangential speed at the edge of the grinding wheel, we'll use the following formula:

Tangential Speed (v) = Radius (r) × Angular Speed (ω)

Given, Radius (r) = 0.25 m and Angular Speed (ω) = 2.0 rad/s.

Now, let's calculate the tangential speed:

v = r × ω
v = 0.25 m × 2.0 rad/s
v = 0.5 m/s

So, the tangential speed at the edge of the wheel is 0.5 m/s.

More on tangential speed: https://brainly.com/question/15002527

#SPJ11

To solve this problem, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of water in the container. The mass of 9.0 g of water is:

9.0 g / 18 g/mol = 0.5 mol

The volume of the container is 2.0 L. We can assume that water behaves as an ideal gas at high temperatures and low pressures, so we can use the ideal gas law to solve for the pressure:

P = nRT/V

Substituting the values we have:

P = (0.5 mol) x (0.082 L-atm/mol-K) x (500 + 273 K) / 2.0 L

Simplifying:

P = 23.4 atm

Therefore, the pressure inside the container is 23.4 atm.

To know more about ideal gas law :

https://brainly.com/question/4147359

#SPJ11

Location of an 8.4-kg mass to make moment of inertia about z-axis zero for a 4.2-kg mass at (3.0, 4.0) m.

What is the location for a second mass to make moment of inertia about the z-axis zero?

To find the location where the moment of inertia about the z-axis is zero, we need to place the second mass such that the center of mass of the two masses lies on the z-axis.

The center of mass of the two masses can be found using the following formula:

xcm = (m1x1 + m2x2)/(m1 + m2)

where

The x-coordinate of the centre of mass is denoted by xcm.

The first object's mass is m1.

x1 is the x-coordinate of the first object,

The mass of the second object is m2.

x2 is the x-coordinate of the second object.

Given:

m1 = 4.2 kg

x1 = 3.0 m

m2 = 8.4 kg

x2 = ?

To find x2, we need to set the x-coordinate of the center of mass equal to zero (since we want the center of mass to lie on the z-axis):

xcm = (m1x1 + m2x2)/(m1 + m2) = 0

Solving for x2, we get:

x2 = -(m1/m2) x1

Substituting the given values, we get:

x2 = -(4.2 kg)/(8.4 kg) * 3.0 m = -1.5 m

Therefore, the 8.4-kg mass should be placed at (-1.5, 0) m to make the moment of inertia about the z-axis zero.

To learn more about moment of inertia, visit: https://brainly.com/question/14460640

#SPJ1

The diffraction limit of a light microscope prevents it from distinguishing between individual atoms.

It is theoretically impossible to see an object as small as an atom with a traditional light microscope, regardless of the quality of the instrument being used. This is due to a fundamental limit on the resolution of light microscopes known as the diffraction limit.

The diffraction limit arises because light waves diffract (bend) when they encounter an obstacle or aperture, such as the lenses in a microscope. This diffraction causes the light waves to spread out and interfere with each other, creating a blurred image of the object being viewed. The resolution of a microscope is limited by the smallest distance that can be distinguished between two points in the image, which is proportional to the wavelength of the light used and the numerical aperture of the lenses in the microscope.

The wavelength of visible light is on the order of a few hundred nanometers, which is much larger than the size of an atom (which is typically on the order of picometers). This means that the diffraction limit of a light microscope prevents it from distinguishing between individual atoms, even with the highest quality lenses and most advanced techniques.

To overcome the diffraction limit and observe individual atoms, other imaging techniques such as scanning tunneling microscopy and transmission electron microscopy are used. These methods use different principles to create images with much higher resolution than is possible with a light microscope.

Learn more about diffraction

brainly.com/question/12290582

#SPJ11

The spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.

The potential energy (PE) of a mass-spring system is given by:

PE = (1/2)kx^2

where k is the spring constant and x is the displacement of the mass from its equilibrium position.

To find the spring constant, we can rearrange the equation as follows:

k = (2PE) / x^2

To use this formula, you need to know the potential energy of the system at a specific displacement and the displacement itself. Once you have those values, you can plug them into the formula to find the spring constant.

Note that the spring constant represents the stiffness of the spring and is measured in units of force per unit length (e.g., N/m). It tells us how much force is required to stretch or compress the spring by a certain amount. A higher spring constant means that the spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.

To learn more about equilibrium visit:

https://brainly.com/question/30694482

#SPJ11

liquids with different specific heat capacities will require different amounts of heat energy to increase their temperature by the same amount, resulting in different DT values.

A. The DT (change in temperature) of a liquid is expected to depend on the number of pulses of heat energy transferred (Q). If more heat energy is transferred to the liquid, then its temperature will increase by a larger amount, resulting in a larger DT.

B. The DT of a liquid is expected to depend on the mass (m) of liquid in the cup. If there is more liquid in the cup, then it will require more heat energy to increase its temperature by the same amount as a cup with less liquid. Thus, the DT is expected to be smaller for a cup with a larger mass of liquid.

C. The DT of a liquid is expected to depend on the kind of liquid. Different liquids have different specific heat capacities, which is the amount of heat energy required to raise the temperature of a unit mass of the substance by one degree Celsius. Thus, liquids with different specific heat capacities will require different amounts of heat energy to increase their temperature by the same amount, resulting in different DT values.

To learn more about increase visit:

https://brainly.com/question/2285058

#SPJ11

When water is heated from 0°C to 4°C, its molecules gain energy and begin to move faster. This increased movement causes the water molecules to move slightly farther apart from each other, resulting in a decrease in density.

When water is heated from 0°C to 4°C, its density decreases. This is because water molecules are held together by hydrogen bonds, which become weaker as the temperature increases. As the water molecules move faster and spread out, the density decreases. However, once the temperature reaches 4°C, the density begins to increase again as the water molecules start to form a crystal lattice structure. A substance's density is its weight per unit volume. Water has a density of about 1 gram per milliliter, but this varies depending on temperature or whether substances are dissolved in it. Because ice is less dense than liquid water, the ice cubes in your glass float.

learn more about the density of water

https://brainly.com/question/30783919

#SPJ11

The kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s is approximately 2.409395 Joules.

The kinetic energy formula, which is provided by: can be used to determine the energy of a moving object,

Kinetic energy (KE) = 1/2× mass ×velocity²

where mass represents the object's weight in kilogrammes (kg) and velocity its speed in metres per second (m/s).

The tennis ball has a mass of 0.051 kg and a speed of 9.7 m/s, thus we can enter these numbers into the formula to determine its kinetic energy:

KE = 1/2 × 0.051 kg × (9.7 m/s)²

KE = 0.5 × 0.051 kg × 94.09 m²/s²

KE = 2.409395 J

So, the kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s would be approximately 2.409395 Joules.

To know more about tennis ball

https://brainly.com/question/15232620

#SPJ4

Referring to Question 13, after the plates are pulled a small distance apart, the energy stored in the capacitor decreases.

As the distance between the plates of a capacitor increases, the capacitance decreases, and so does the energy stored in the capacitor. This is because the capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them. Therefore, when the distance between the plates is increased, the capacitance decreases, and the energy stored in the capacitor decreases as well. It is important to note that the energy stored in a capacitor is given by the formula E = 1/2 CV^2, where E is the energy stored, C is the capacitance, and V is the potential difference across the plates of the capacitor. As the capacitance decreases, the energy stored in the capacitor also decreases, even if the potential difference across the plates remains the same.
In conclusion, when the plates of a capacitor are pulled a small distance apart, the energy stored in the capacitor decreases due to the decrease in capacitance. This is because the capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them.

Learn more about capacitor here: https://brainly.com/question/17511060

#SPJ11

Your Answer :- The magnetic field strength at the center of the larger loop is B/2, which corresponds to answer choice D.

The magnetic field strength (B) at the center of a current-carrying circular loop can be calculated using the formula:

B = μ₀ * I / (2 * π * R)

Where:
- μ₀ is the permeability of free space (4π × 10^(-7) Tm/A),
- I is the current,
- R is the radius of the loop.

Given that both loops are made from the same wire and carry the same current, the magnetic field strength at the center of the smaller loop is B. The radius of the larger loop is twice that of the smaller loop (2R).

To find the magnetic field strength at the center of the larger loop, we can use the same formula:

B_larger_loop = μ₀ * I / (2 * π * (2R))

Simplify the equation:

B_larger_loop = (μ₀ * I) / (4 * π * R)

Since B = μ₀ * I / (2 * π * R), we can rewrite the equation as:

B_larger_loop = (1/2) * B

So, the magnetic field strength at the center of the larger loop is B/2, which corresponds to answer choice D.

learn more about "magnetic field strength":-https://brainly.com/question/26257705

#SPJ11

Answer: work done is: 700 J.

the formula of work done is : work=force × distance

here, the distance car being pulled is 56.0 m and the force applied on it is 12.5 n. so the work done to pulled a car id : = 12.5 × 56.0

=700.0 j.