Answer:
22.25
Step-by-step explanation:
8x+ (11*2)=200
first, multiply 11 and 2 =22
that leaves 8x+22=200
so now let's subtract the 22 from both sides
8x=178 now divide the 8
x= 22.25 so that is the most the jackets could have cost
Dixon made a $2,000 down payment on an $8,000 car. The down
payment was what percent of the price?
Answer:
25%
Step-by-step explanation:
one 4th of 8,000 is 2,000 convert it to a percent and there you go!
Give brainliest please! Enjoy your night!
rewrite the expression 4^-2 x 8^0 x 5^6
Assuming the utility function of an individual is as follows. U= 18q+7q2-1/3q3
determine the utility maximizing units of consumption
The utility maximizing units of consumption are approximately 1 or 15 units, depending on other factors such as budget constraints and the specific preferences of the individual.
To find the utility maximizing units of consumption, we need to calculate the first derivative of the utility function (U) with respect to q and set it equal to zero. Here's the utility function:
U = 18q + 7q^2 - (1/3)q^3
Now, we'll find the first derivative (dU/dq):
dU/dq = 18 + 14q - q^2
To find the utility maximizing units, set dU/dq to zero and solve for q:
0 = 18 + 14q - q^2
Rearrange the equation:
q^2 - 14q + 18 = 0
Now, we'll solve for q using the quadratic formula:
q = (-b ± √(b^2 - 4ac)) / 2a
In this case, a = 1, b = -14, and c = 18. Plug these values into the formula:
q = (14 ± √((-14)^2 - 4 * 18)) / 2
q = (14 ± √(196 - 72)) / 2
q = (14 ± √124) / 2
The two possible solutions for q are:
q1 ≈ 1.27
q2 ≈ 14.73
Since the individual consumes discrete units, the utility maximizing consumption will be the whole number closest to these values.
Therefore, the utility maximizing units of consumption are approximately 1 or 15 units, depending on other factors such as budget constraints and the specific preferences of the individual.
To learn more about consumption, refer below:
https://brainly.com/question/14933604
#SPJ11
Small baskets of tomatoes are sold at a vegetable stand for $3 per basket. Large
baskets of tomatoes are sold at the stand for $5 per basket. Only whole numbers of
baskets may be purchased.
A customer purchases a total of 8 baskets of tomatoes and pays $36.
A. Write and solve a system of equations that models the number of small
baskets (x) and the number of large baskets () that the customer purchases.
Show or explain all your work.
The customer purchased 2 small baskets and 6 large baskets.
Let x be the number of small baskets and y be the number of large baskets that the customer purchases.
We can set up a system of two equations based on the information given:
Equation 1: x + y = 8 (The total number of baskets purchased is 8)
Equation 2 3x + 5y = 36: (The total amount paid for the baskets is $36)
To solve this system, we can use either substitution or elimination method.
Using substitution method:
From Equation 1, we have x = 8 - y.
Substitute this into Equation 2:
3(8 - y) + 5y = 36
24 - 3y + 5y = 36
2y = 12
y = 6
Now, we can substitute y = 6 back into Equation 1 to find x:
x + 6 = 8
x = 2
Therefore, the customer purchased 2 small baskets and 6 large baskets.
Using elimination method:
We can multiply Equation 1 by 3 and subtract it from Equation 2 to eliminate x:
3x + 5y = 36
- (3x + 3y = 24)
2y = 12
y = 6
Now, we can substitute y = 6 back into either Equation 1 or Equation 2 to find x. Let's use Equation 1:
x + 6 = 8
x = 2
To know more about basket refer here
https://brainly.com/question/54060245#
#SPJ1
grade
Math
Z.1 Scale drawings of polygons WEA
Language
8
Polygon P is a scaled copy of polygon N.
10
4
Learn with an example
4
20
16
40
Polygon N
Polygon P
What scale factor takes polygon N to polygon P?
for
10
Watch a video ▸
To find the scale factor that takes polygon N to polygon P, you need to divide the corresponding side lengths of the two polygons.
How to Determine the Problem?To find the scale factor that takes polygon N to polygon P, you need to divide the corresponding side lengths of the two polygons.
For example, if one of the sides of polygon N is 6 units long, and the corresponding side of polygon P is 9 units long, then the scale factor is 9/6 or 1.5. This means that polygon P is 1.5 times larger than polygon N in all dimensions.
To determine the scale factor for all the corresponding sides of the polygons, you can compare each pair of sides and divide the length of the corresponding side of polygon P by the length of the corresponding side of polygon N.
It's important to note that when finding the scale factor between two polygons, you must compare corresponding sides. That is, you can't just choose any two sides to compare; you must compare the sides that are in the same position in the two polygons.
Learn more about polygon here: https://brainly.com/question/29425329
#SPJ1
!!!HELPP ME ASAP!!!! Claude is reading a science fiction book in which aliens have dropped a fungus on a 10 square mile section of a planet. The fungus spreads rapidly, increasing the area it covers by 50% every hour. The total
area of the planet is 200 million square miles. Claude created an equation and determined that it will take approximately 41 hours for the fungus to cover planet What is the equation that Claude created?
The equation Claude created is: 10 * (1.5)^t = 200,000,000, where t represents the number of hours.
Let A be the initial area of the fungus that covers the 10 square mile section of the planet.
After 1 hour, the fungus increases in size by 50%, which means it multiplies by 1.5. Thus, the area covered by the fungus after 1 hour is:
A + 1.5A = 2.5AAfter 2 hours, the fungus increases again by 50%, so its area becomes:
2.5A + 1.5(2.5A) = 6.25A
In general, after n hours, the area of the fungus becomes: A(1.5)^n
Since we want the fungus to cover the entire planet, we need to solve the following equation: A(1.5)^41 = 200,000,000
Simplifying, we get:
A = 200,000,000 / (1.5)^41
Therefore, the equation that Claude created is:
A(1.5)^n = 200,000,000
where n is the number of hours it takes for the fungus to cover the planet.
To learn more about “area” refer to the https://brainly.com/question/25292087
#SPJ11
Please help I need it ASAP
Answer:
BC= 47.424
I believe that’s correct, but if you really need an answer just get a triangle calculator
Please help I am giving a lot of points
A circle has been dissected into 16 congruent sectors. The base of one sector is 1. 56 units, and its height is 3. 92 units. Using the area of a triangle formula, what is the approximate area of the circle?
circle A is dissected into 16 congruent sectors, one sector is highlighted
27. 52 units2
48. 25 units2
48. 92 units2
76. 44 units2
The closest answer choice is [tex]27.52 units^2.[/tex]
The area of the circle, we need to find the area of one sector and then multiply it by 16 since there are 16 congruent sectors.
To find the area of one sector, we use the formula:
[tex]Area of sector = (angle/360) * \pi*r^2[/tex]
Since we know the base and height of the highlighted sector, we can use the Pythagorean theorem to find the radius of the circle:
[tex]r^2 = (1.56/2)^2 + (3.92)^2[/tex]
r ≈ 3.969 units
Now we can find the angle of one sector using the formula:
angle = (base/radius) x 180/π
angle ≈ 22.5 degrees
Plugging in the values for angle and radius in the area of sector formula, we get:
[tex]Area of sector =(22.5/360) *\pi (3.969)^2[/tex]
Area of sector ≈ 0.491π
Multiplying this by 16, we get the approximate area of the circle:
Approximate area of circle ≈ 16 x 0.491π
Approximate area of circle ≈ 7.8π
Using a calculator to approximate π as 3.14, we get:
Approximate area of circle ≈ [tex]24.46 units^2[/tex]
To know more about congruent sectors refer here
https://brainly.com/question/9677976#
#SPJ11
Sam has 42 pencils and 56 pens.he will give all of them to a group of his classmates. each classmate will receive the same number of each item. what is the greatest number of classmates sam can give pencils and pens to? how many of each item will each classmate receive?
Sam can give pencils and pens to 14 classmates, with each classmate receiving 3 pencils and 4 pens (since 42 divided by 14 is 3, and 56 divided by 14 is 4).
Sam has 42 pencils and 56 pens, and he wants to distribute them equally among his classmates. To find the greatest number of classmates, we need to find the greatest common divisor (GCD) of 42 and 56.
The GCD of 42 and 56 is 14. Therefore, the greatest number of classmates Sam can give pencils and pens to is 14.
Each classmate will receive:
- 42 pencils / 14 classmates = 3 pencils per classmate
- 56 pens / 14 classmates = 4 pens per classmate
So, each of the 14 classmates will receive 3 pencils and 4 pens.
More on GCD: https://brainly.com/question/15061912
#SPJ11
Plsss answer correctly and Show work for points!
Answer:
b=18.7
Step-by-step explanation:
sin112°/37=sin28°/b
b=sin28°/(sin112°/37)
b=18.7
An airplane is circling an airport at a height of 500m. the angle of depression of the control tower of the aiport is 15 degrees. what is the distance between the airplane and the tower
The distance between the airplane and the tower is approximately 1864.5 meters.
To solve this problem, we can use trigonometry. Let's draw a diagram to help us visualize the situation:
```
T
/|
/ |
/ | 500m
/a |
--------
x
```
In this diagram, "T" represents the control tower, "a" represents the airplane, and "x" represents the distance between them. We know that the height of the airplane is 500m, and the angle of depression from the tower to the airplane is 15 degrees. This means that the angle between the horizontal ground and the line from the tower to the airplane is also 15 degrees.
Using trigonometry, we can set up the following equation:
```
tan 15 = 500 / x
```
We can solve for "x" by multiplying both sides by "x" and then dividing by tan 15:
```
x = 500 / tan 15
```
Using a calculator, we can find that tan 15 is approximately 0.2679. Therefore:
```
x = 500 / 0.2679
x ≈ 1864.5m
```
So the distance between the airplane and the tower is approximately 1864.5 meters.
Learn more about trigonometry,
https://brainly.com/question/29766029
#SPJ11
The temperature at a point (x, y, z) is given byT(x, y, z) = 10e¯2x² − y² − 3z².In which direction does the temperature increase fastest at the point (1, 3, 1)?Express your answer as a UNIT vector.
The direction of fastest increase in temperature at the point (1, 3, 1) is given by the unit vector (-5/sqrt(10) , -3/sqrt(10) , -9/sqrt(10)).
To find the direction of fastest increase in temperature at the point (1, 3, 1), we need to find the gradient of the temperature function T(x, y, z) at that point.
The gradient of a function is a vector that points in the direction of steepest increase, and its magnitude is the rate of change in that direction. So, we can find the gradient vector ∇T(x, y, z) as follows:
∇T(x, y, z) = ( ∂T/∂x , ∂T/∂y , ∂T/∂z )
=[tex]( -20xe^(-2x^2-y^2-3z^2) , -2ye^(-2x^2-y^2-3z^2) , -6ze^(-2x^2-y^2-3z^2) )[/tex]
Therefore, at the point (1, 3, 1), the gradient of T(x, y, z) is:
∇T(1, 3, 1) = [tex]( -20e^(-8) , -6e^(-8) , -18e^(-8) )[/tex]
To find the direction of fastest increase, we need to normalize this vector to a unit vector. The magnitude of the gradient vector is:
|∇T(1, 3, 1)| = sqrt( (-[tex]20e^(-8))^2 + (-6e^(-8))^2 + (-18e^(-8))^2 )[/tex]
= sqrt( 640e^(-16) )
= 8e^(-8) sqrt(10)
So, the unit vector in the direction of fastest increase is:
( -20e^(-8) / (8e^(-8) sqrt(10)) , -6e^(-8) / (8e^(-8) sqrt(10)) , -18e^(-8) / (8e^(-8) sqrt(10)) )
= ( -5/sqrt(10) , -3/sqrt(10) , -9/sqrt(10) )
Therefore, the direction of fastest increase in temperature at the point (1, 3, 1) is given by the unit vector (-5/sqrt(10) , -3/sqrt(10) , -9/sqrt(10)).
To learn more about unit vector visit: https://brainly.com/question/30279109
#SPJ11
Flo ate
3
2
of a sandwich and Arnie ate- of a sandwich. If Arnie ate more, what
3
must be true?
A Flo's sandwich is bigger.
B Arnie's sandwich is bigger.
C) The sandwiches are the same size.
D) It doesn't matter which sandwich is bigger.
Flo ate more of the sandwich than Arnie.
Option A is the correct answer.
We have,
We need to compare the values 3/4 and 2/3 to determine which fraction represents a larger amount of sandwiches eaten.
To make the fractions comparable, we need to find a common denominator.
The least common multiple of 4 and 3 is 12.
So we can rewrite 3/4 and 2/3 with 12 as the denominator:
3/4 = 9/12
2/3 = 8/12
Comparing these fractions, we see that 9/12 (or 3/4) is greater than 8/12
(or 2/3).
Therefore,
Flo ate more of the sandwich than Arnie.
Learn more about fractions here:
https://brainly.com/question/24370499
#SPJ1
Jaime is cutting shapes out of cardboard to make a piñata. One of the shapes is shown in a
coordinate grid
c. (0,10)
d. (3,2)
e. (9,0)
f. (3,-2)
g (0,-10)
h. (3,-2)
a. (-9,0)
(it’s the shape of a star)
What is the length of side AB? Round your answer to the nearest tenth of a unit.
Show your work.
The length of side AB is 6.3 units.
How to find the length of side ABThe length of side AB is solved using the distance formula below
AB = √((x₂ - x₁)² + (y₂ - y₁)²
where
(x₁, y₁) = (-9, 0) and
(x₂, y₂) = (-3, 2).
AB = √((-3 - (-9))² + (2 - 0)²)
AB = √(6² + 2²)
AB = √(40)
AB = 2√(10)
AB = 6.3245
AB = 6.3 to the nearest tenth
Therefore, the length of side AB is 6.3 units.
Learn more about distance formula t
https://brainly.com/question/661229
#SPJ1
Find the distance from the plane 6x + 5y + z = 54 to the plane 6x + 5y + z = 48. The distance is d= (Type an exact answer, using radicals as needed.)
The exact distance between the planes, using radicals as needed, is d = 6√62 / 62.
To find the distance d between the two planes 6x + 5y + z = 54 and 6x + 5y + z = 48, we can use the formula for the distance between parallel planes:
d = |C1 - C2| / √(A^2 + B^2 + C^2)
where A, B, and C are the coefficients of the x, y, and z terms respectively, and C1 and C2 are the constants in the two equations.
In this case, A = 6, B = 5, C = 1, C1 = 54, and C2 = 48. Plugging these values into the formula, we get:
d = |54 - 48| / √(6^2 + 5^2 + 1^2)
d = 6 / √(36 + 25 + 1)
d = 6 / √62
So the distance between the two planes is d = 6/√62. You can simplify this expression by rationalizing the denominator:
d = (6/√62) * (√62/√62)
d = 6√62 / 62
Thus, the exact distance between the planes, using radicals as needed, is d = 6√62 / 62.
radicalshttps://brainly.com/question/7572132
#SPJ11
A builder is creating a scale drawing of a plot of land as shown. The original plot of land is 335 meters wide. The drawing uses a scale factor of 1500.
Find the missing side length of the original plot of land in meters and the missing side length of the scale drawing in centimeters.
Original plot of land's length:
m
Scale drawing width:
The calculated width of the scale drawing is 0.67 cm and the missing side length is undefined
Finding the missing side length in the original plotWe have the following statements from the question
The width of the original plot is 335 metersThe scale factor of the drawing is 1/500.The above statements means that the width of the scale is
Scale width = 335 cm * 1/500
When the products are evaluated, we have the following
Scale width = 0.67 cm
This means that the width of the scale drawing is 0.67 cm
Also, the missing side length of the original plot of land in meters cannot be calculated
Read more about scale factor at
https://brainly.com/question/29229124
#SPJ1
3. What is the largest number that divides 626, 3127 and 15628 and leaves remainders of 1, 2 and 3 respectively?
Answer:
Step-by-step explanation:
625
According the April 12, 2017 Pew Research survey, 58% of Americans approve of U. S. Missile strikes in
Syria in response to reports of the use of chemical weapons by Bashar al-Assad's government (the
Syrian government). A sample of 50 Americans are surveyed. Let o be the sample proportion of
Americans who approve the U. S. Missile strikes.
1. What is the population proportion?
(decimal form)
2. What is the sample size?
3. Can the normal approximation be used with this distribution?
4. What is the mean of the sampling proportion?
Answer:
The population proportion is given as 58% or 0.58 in decimal form.
The sample size is given as 50 Americans.
Yes, the normal approximation can be used with this distribution because the sample size is sufficiently large (n=50) and the underlying population is assumed to be large enough to satisfy the independence requirement.
The mean of the sampling proportion (o) can be calculated using the formula:
mean = population proportion = 0.58
Therefore, the mean of the sampling proportion is 0.58 or 58%.
To know more about decimal refer here
https://brainly.com/question/30958821#
#SPJ11
A right square pyramid is shown. A plane intersects the pyramid through the apex and is perpendicular to the base.
Answer:
Trapezoid.
Step-by-step explanation:
Determine whether Rohe Theorem can be applied to on the dood inter - 2x-) -1.31 WS
A. Yes, Rolle's Theorem can be applied B. No, because is not continuous on the closed intervals
The Rohe Theorem can be applied to on the dood inter - 2x-) -1.31 WS. No, because it is not continuous on the closed intervals.
To determine whether Rolle's Theorem can be applied to the given function (ignoring typos and irrelevant parts), we need to consider the requirements for Rolle's Theorem: the function must be continuous on a closed interval and differentiable on an open interval within that closed interval.
Your answer: B. No, because the function is not continuous on the closed intervals. This is due to the presence of irrelevant parts in the given function, which makes it impossible to determine its continuity and differentiability. Therefore, Rolle's Theorem cannot be applied in this case.
Visit here to know about Rohr Theorem:
brainly.com/question/6563267
#SPJ11
Calculate d²y/d²x y= -5x2 + x d²y/d²x= Calculate d²y/dx² y= 7/x d²y/dx²=
To calculate the second derivative of a function, we need to take the derivative of the first derivative. The second derivative gives us information about the curvature of the function. A positive second derivative indicates that the function is concave up, while a negative second derivative indicates that the function is concave down. A second derivative of zero indicates that the function has no curvature at that point.
In the first example given, y = -5x^2 + x, we first find the first derivative by taking the derivative of the function with respect to x. This gives us dy/dx = -10x + 1. To find the second derivative, we take the derivative of dy/dx with respect to x. This gives us d²y/d²x = -10. This indicates that the function has a constant negative curvature, meaning it is concave down everywhere.
In the second example given, y = 7/x, we first find the first derivative by taking the derivative of the function with respect to x. This gives us dy/dx = -7/x^2. To find the second derivative, we take the derivative of dy/dx with respect to x. This gives us d²y/dx² = 14/x^3. This indicates that the function is concave up for positive values of x and concave down for negative values of x. The second derivative is undefined at x = 0, indicating a point of inflection.
Overall, the second derivative gives us important information about the behavior of a function and can help us identify points of inflection and concavity.
MORE PROBLEM ON DERIVATIVES : https://brainly.com/question/23819325
#SPJ11
A lot of people that live in San Luis AZ have a job at Yuma or nearby the city. For this reason, Yuma county officials are considering expanding the highway between San Luis and Yuma. Since they will need a considerable amount of money to build the new highway, they want to make sure that at least 65% of employed adults that live in San Luis, travel to Yuma or nearby to get to their workplaces. From the 11,559 employed adults that live in San Luis, a random sample of 400 people was taken and 290 said that they work at Yuma or nearby. Assume that the Yuma county officials want to build a 95% confidence interval to estimate the proportion of employed adults that live in San Luis and travel to Yuma or nearby to get to their workplaces.
Calculate the margin of error for this sample, assuming a level of confidence of 95%.
Construct a 95% confidence interval for the employed adults that live in San Luis AZ and travel to Yuma or nearby to get to their workplaces.
Explain the meaning of "95% level of confidence", in context.
Interpret the confidence interval you created in question (b).
Given the confidence interval you calculated on (b), is it worth it to invest the money on this new highway?
Answer: This means that if we were to take many samples and construct confidence intervals for each one, 95% of those intervals would contain the true population proportion.
Step-by-step explanation:
a) To calculate the margin of error for this sample, we can use the formula:
Margin of error = Z√(p(1-p)/n)
where:
Z = the z-score corresponding to the level of confidence (95% confidence interval corresponds to a z-score of 1.96)
p = the sample proportion (290/400 = 0.725)
n = the sample size (400)
Plugging in these values, we get:
Margin of error = 1.96√(0.725(1-0.725)/400) ≈ 0.049
So, the margin of error for this sample is approximately 0.049 or 4.9%.
b) To construct a 95% confidence interval for the proportion of employed adults that live in San Luis and travel to Yuma or nearby to get to their workplaces, we can use the formula:
Confidence interval = p ± Z*(√(p*(1-p)/n))
where:
p = the sample proportion (0.725)
Z = the z-score corresponding to the level of confidence (1.96)
n = the sample size (400)
Plugging in these values, we get:
Confidence interval = 0.725 ± 1.96*(√(0.725*(1-0.725)/400)) ≈ (0.678, 0.772)
Therefore, we can say with 95% confidence that the proportion of employed adults that live in San Luis and travel to Yuma or nearby to get to their workplaces is between 0.678 and 0.772.
c) The "95% level of confidence" means that if we were to repeat this sampling process many times and construct 95% confidence intervals for each sample,
we would expect that 95% of those intervals would contain the true population proportion of employed adults that live in San Luis and travel to Yuma or nearby to get to their workplaces.
d) The confidence interval we constructed in (b) tells us that we can be 95% confident that the true population proportion of employed adults that live in San Luis and travel to Yuma or nearby to get to their workplaces is between 0.678 and 0.772.
This means that if we were to take many samples and construct confidence intervals for each one, 95% of those intervals would contain the true population proportion.
Based on this interval, we can conclude that it is likely that at least 65% of employed adults that live in San Luis travel to Yuma or nearby to get to their workplaces, as the lower bound of the interval is above 65%.
e) Whether or not it is worth it to invest in the new highway depends on many factors beyond just the proportion of employed adults that live in San Luis and travel to Yuma or nearby to get to their workplaces.
The decision to invest in the highway should be based on a careful cost-benefit analysis that takes into account factors such as the expected traffic volume, the expected economic benefits, and the cost of the project.
To know more about population refer here
https://brainly.com/question/27991860#
#SPJ11
What is 3x-(2x+9) + 4x?
Please help^^
Answer:
5x-9
Step-by-step explanation:
Distribute: 3x-(2x+9) + 4x
3x - 2x - 9 + 4x
Combine Like Terms: 3x - 2x - 9 + 4x
5x-9
I have some coins in my pocket. Nickles and pennies I have a total of $. 41 I have 21 coins in total. How many Nickles and pennies do I have?
The number of nickels and pennies in the pocket is 5 and 16 respectively.
How to find the number of coins?To find the number of coins, Let's assume the number of nickels is x and the number of pennies is y.
According to the problem, we have two equations:
The total value of the coins is $0.41:
0.05x + 0.01y = 0.41
The total number of coins is 21:
x + y = 21
Now we can solve this system of equations to find x and y. One way to do this is to use substitution.
Solving the second equation for y, we get:
y = 21 - x
Substituting this into the first equation, we get:
0.05x + 0.01(21 - x) = 0.41
Simplifying:
0.05x + 0.21 - 0.01x = 0.41
0.04x = 0.2
x = 5
So we have 5 nickels.
Substituting this into the equation y = 21 - x, we get:
y = 21 - 5 = 16
So we have 16 pennies.
Therefore, the number of nickels and pennies in the pocket is 5 and 16 respectively.
Learn more about Coins counting
brainly.com/question/27681719
#SPJ11
PLEASE HELP 30 POINTS
The volume of the oblique cylinder whose base and height is given would be = 9,646.08 m³. That is option B.
How to calculate the volume of a cylinder?To calculate the volume of a cylinder, the formula that should be used is given as follows:
Volume of a cylinder = πr²h
π = 3.14
R = diameter/2 = 16/2 = 8m
Height = 8²+48² (using the Pythagorean formula)
= 64+2304
=√ 2368
= 48.66cm³
The volume of the cylinder = 3.14 × 8×8×48.66
= 9,646.08 m³
Learn more about volume here:
https://brainly.com/question/27710307
#SPJ1
What is the actual length of the bus?
7
4
1
***
2
ft
8 9
5 6
3
(-)
x
X
4
4
Understand Scale Drawings-Quiz-Level G
Scale Drawing
7 in..
Actual Bus
Tag
T
2 in.
ㅗ
T
10 ft
1
%
Since it's a scale, we can take the backsides of both buses. They read 2in and 10ft
12 inches are in one foot, so 120 inches are in 10ft
Next we'll divide [tex]120\div2[/tex] and we get 60.
That's means we can multiply [tex]7 \times 60[/tex], getting 420 inches
To get it back to feet, we divide by 12
[tex]420\div12[/tex] = 35 feet
Therefore, The actual length of the bus is 35 feet
Answer:
its 35
Step-by-step explanation:
Two scout patrols start hiking in opposite directions. Each patrol hikes 5 kilometers. Then the scouts turn 90 degrees to their right and hike another 6 kilometers. How many kilometers are there between the two scout patrols?
The distance between the two scout patrols is approximately 11.66 kilometers.
We can see that the situation forms a right triangle with the hypotenuse representing the distance between the two scout patrols. Let's call this distance d.
Each patrol initially hikes 5 kilometers in opposite directions. This means that the distance between them at this point is 10 kilometers (5 km + 5 km).
Then, each patrol turns 90 degrees to their right and hikes 6 kilometers. This means that they travel along the legs of the right triangle, which have a length of 6 kilometers.
Using the Pythagorean theorem, we can solve for the hypotenuse:
d² = 10² + 6²
d² = 136
d ≈ 11.66 km
To learn more about distance click on,
https://brainly.com/question/21727359
#SPJ1
54/g - 8 when g = 6 and h=3
The value of the simplified expression is -15.
What is the simplification of the expression?
The simplification of the expression is determined by substituting the appropriate values of the variables into the equation.
The given expression; = 54/g - 8h
The value of g = 6 and the value of h = 3,
The value of the expression is calculated as follows;
= 54/g - 8h
= 54/6 - 8(3)
= 9 - 24
= - 15
Learn more about simplification here: https://brainly.com/question/28008382
#SPJ1
The complete question is below:
54/g - 8h, when g = 6 and h=3
A magic square is shown below. Every row, column and long diagonal adds to the same total. Each number can only be used once. Copy the magic square into your book and complete it using the numbers provided. 2 Numbers to use 3 -1 0 3 X 2 4 Magic square -3 2 1 -4 -2
Answer:
Here is the complete magic square:
-3 4 -1
2 0 -2
1 -4 3
Every row, column, and long diagonal adds to 0.
In the coordinate plane, the point X(1,4) is translated to the point X(0,6) . Under the same translation, the points Y(-1,2) and Z(-3,1) are translated to Y and Z , respectively. What are the coordinates of Y and Z ?
Help!!!!!! URGENT
Thus, the coordinates of Y and Z after the translation is obtained as :
Y'(-2,4) and Z'(-4, 3).
Define about the translation:A figure is translated when it is moved from one point to another without changing in size, form, or rotation.
A figure can be translated to move it up, down, left, or right while maintaining the same size. This is carried out using a coordinate system in order to be done properly and accurately.The pre-image is the original object that needs to be translated, and the image is the translated object.Given translation:
Point X(1,4) ---> point X'(0,6)
There is 1 unit shift to left as 1 is subtracted to x coordinate to get 0.
There is 2 unit shift to upward as 2 is added to y coordinate to get 6..
Translation:
(x,y) --->(x - 1, y + 2)
Applying same on points Y and Z,
Y(-1,2) --> Y'(-2,4)
Z(-3,1) --> Z'(-4, 3)
Thus, the coordinates of Y and Z after the translation is obtained as :
Y'(-2,4) and Z'(-4, 3).
Know more about the translation
https://brainly.com/question/1574635
#SPJ1
