Answer:
a. lengthen the amount of time in which the depreciation leads to a smaller trade deficit.
Explanation:
Depreciation can be defined as the reduction of cost of a fixed asset systematically until the value of the asset becomes zero.
The Modified Accelerated Cost Recovery System (MACRS) can be defined as a depreciation system that avails business owners or companies the ability and opportunity to recover or recoup the cost basis of physical assets that have experienced deterioration over a specific period of time.
In the United States of America, the Modified Accelerated Cost Recovery System (MACRS) is used mainly for tax purposes because it gives room for faster depreciation of a physical asset in its first years or initial usage and reduces depreciation as it is being used over a long period of time.
Hence, if foreign manufacturers cut or reduce their manufacturing costs and profit margins in response to a depreciation in the U.S. dollar, the effect of these actions is certainly to lengthen or increase the amount of time in which the depreciation in the U.S dollars leads to a smaller trade deficit.
A deficit can be defined as an amount by which money, falls short of its expected value.
In Financial accounting, deficit is usually as a result of revenue falling below expenses or expense exceeding revenue at a specific period of time.
For instance, if in a country liabilities exceeds assets or import exceeds export there would be a deficit in the financial account of the country. This is simply as a result of a country having to import more goods and services than it is exporting to other countries in trade.
In conclusion, a trade deficit is caused because the value of goods and services exported is lower than the value of goods and services being imported in a particular country.
Dummitt, Inc. anticipates sales of 70,000 units, 68,000 units, and 71,000 units in July, August, and September, respectively. Company policy is to maintain an ending finished-goods inventory equal to 30% of the following month's sales. On the basis of this information, how many units would the company plan to produce in August
Answer:
the number of units produced in August is 68,900 units
Explanation:
The computation of the number of units produced in August is presented below:
Sales 68,000 units
Add: ending inventory (71,000 units × 30%) 21,300 units
Less: beginning inventory (68,000 units × 30%) -20,400 units
Production in August 68,900 units
Hence, the number of units produced in August is 68,900 units
The same format should be used
Flash ECard Manufacturing manufactures software parts for the computer software systems that produce ecards. The Flash II part is currently manufactured in the Computer Department. The Data Department also produces the part and the plant has excess capacity to produce the Flash II part. The current market price of the Flash II part is $700. The managerial accountant reported the following manufacturing costs and variable expense data: Flash ECard Manufacturing Manufacturing Costs and Variable Expense Report Flash Component Direct materials $810 Direct labor $160 Variable manufacturing overhead $140 Fixed manufacturing overhead (current production level) $185 Variable selling expenses (only incurred on sales to outside consumers) $136 If the highest acceptable transfer price is $700 in the market, what is the lowest acceptable inhouse price the Data Department should receive to produce the part inhouse at the Computer Department? "810"
Answer:
the lowest acceptable inhouse price the Data Department is $1,110
Explanation:
The computation of the lowest acceptable inhouse price the Data Department is shown below:
= Direct materials + direct labor + Variable manufacturing overhead
= $810 + $160 + $140
= $1,110
Hence, the lowest acceptable inhouse price the Data Department is $1,110
The above formula should be applied for determining the lowest acceptable inhouse price is as follows:
what gives rise to the problem of scarcity
Answer:
Explanation:
Often scarcity is caused by a combination of demand and supply induced effects. A rise in demand, e.g. due to rising population causes overcrowding and population migration to other fragile ecological areas
24. The following information is available for Geek Manufacturing Company. -- Direct materials price standard is $4.50 per pound. -- Direct materials quantity standard is seven pounds per finished unit. -- Budgeted production is 25,000 finished units. -- 200,000 pounds of direct materials were purchased for $925,000. -- 200,000 pounds of direct materials were used in production. -- 25,600 finished units of product were produced. What is the direct materials price variance
Answer:
Material price variance = $25,000 Unfavorable
Explanation:
A material price variance occurs where materials are purchased at a price either lower or higher than the standard price. A favorable variance is recorded where the actual total cost of materials is lower that the standard cost. While an adverse variance implies the opposite
$
200,000 pounds should have cost (200,000× $4.50)= 900,000
but did cost 925,000
Material price variance 25,000Unfavorable
Material price variance = $25,000 Unfavorable
Your broker requires an initial margin of $6,100 per futures contract on wheat and a maintenance margin of $4,400 per contract. Wheat futures contracts are based on 5,000 bushels and quoted in cents per bushel. You sold one wheat futures contract yesterday at the closing settlement price quote of 780. Today, the settlement quote is 802. Will you receive a margin call and if so, for what amount? All margin calls restore the margin level to its initial level.
Answer: No margin call
Explanation:
Based on the information given in the question, the new margin will be calculated as:
= Initial margin + (Sales - Settlement quote)/100 × Size
= 6100 + [(780 - 802)/100 × 5000]
= 6100 + (-22 × 5000)
= 6100 - 1100
= 5000
Since we've our new margin as 5000 while the maintenance margin is 4400, then there'll be no margin call once new margin is higher.
Burger Prince buys top-grade ground beef for $1.05 per pound. A large sign over the entrance guarantees that the meat is fresh daily. Any leftover meat is sold to the local high school cafeteria for 75 cents per pound. Four hamburgers can be prepared from each pound of meat. Burgers sell for 70 cents each. Labor, overhead, meat, buns, and condiments cost 40 cents per burger. Demand is normally distributed with a mean of 385 pounds per day and a standard deviation of 30 pounds per day. What daily order quantity is optimal
For a cheese-lover, Burger King's Mac n' Cheetos are what type of product? (1pt)
Answer:
specialty product
Explanation:
For a cheese-lover, this product would be considered a specialty product. This is because they will actively seek out this product specifically because they love the ingredient/flavor of the product. For someone that loves cheese, products that are cheese flavored or contain cheese will be prioritized above all of the other products that do not contain cheese. This ultimately classifies the product as a specialty product because it is being sought after, even with other options around.
The new proposed project needs to use an expensive medical equipment that is already owned by the company. The purchase price of this equipment is $640,000 . The company also spent $71,000 to update its operating software. The equipment recieved a recent market bid from an interested buyer of $768,000. The current book value of $525,000. If the company decides to use this equipment for the new project , what value should we use for this equipment to be included in the initial cash flow of the project
Answer:
$525,000
Explanation:
Given that
The purchase price of an equipment $640,000
The company spend on operating software is $71,000
The recent market bid is $768,000
And, the current book value is $525,000
As the company decided to use the equipment for the new project so the amount that should be included in the initial cash flow would be $525,000 as the same would be presented on the balance sheet. It would be the cash outflow for the company
On April 30, 2019, Macy Products purchased machinery for $132,000. The useful life of this machinery is estimated at 5 years, with a $32,000 residual value. The company uses the double-declining-balance method. Depreciation expense for the fiscal year ending on December 31, 2020 will be:
Answer:
$38,720
Explanation:
Depreciation Expense = 2 x SLDP X BVSLDP
where,
SLDP = 100 ÷ number of useful life
= 100 ÷ 5
= 20 %
2019
Annual Depreciation Expense = 2 x 20 % x $132,000
= $52,800
But, depreciation expired for only 8 months from April 30, 2019 to December 31, 2019 during the year, therefore
Depreciation Expense = $52,800 x 8/12 = $35,200
2020
Annual Depreciation Expense = 2 x 20 % x ($132,000 - $35,200)
= $38,720
Conclusion :
Depreciation expense for the fiscal year ending on December 31, 2020 will be $38,720
Howell Petroleum, Inc., is trying to evaluate a generation project with the following cash flows: Year Cash Flow 0 –$ 40,500,000 1 62,500,000 2 – 15,500,000
a. If the company requires a return of 11 percent on its investments, what is the NPV of the project? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) NPV $
b. Compute the IRRs for this project. (Do not round intermediate calculations and enter your answers as a percent rounded to 2 decimal places, e.g., 32.16. Enter the larger IRR in the first answer box and the smaller IRR in the second answer box. If you can only calculate one IRR, enter it in both boxes to receive partial credit. A negative answer should have a minus sign.) Internal rate of return % Internal rate of return %
Answer:
A. $3,226,158.59
B. Larger IRR 23.28%
Smaller IRR -68.95%
Explanation:
a. Calculation to determine the NPV of the project
Net Present Value (NPV) = -$40,500,000 + $62,500,000 / (1+.11) - $15,500,000 /( 1+.11)^2
Net Present Value (NPV) = -$40,500,000 + $62,500,000 / 1.11 - $15,500,000 / 1.11^2
Net Present Value (NPV) = $3,226,158.59
Therefore Net Present Value (NPV) of this project is $3,226,158.59
B. Computation for the IRRs for this project
We will be Using excel to compute the IRRs for this project
0 = -$40,500,000 + $62,500,000 / (1+.11) - $15,500,000 /( 1+.11)^2
= -$40,500,000 + $62,500,000 / 1.11 - $15,500,000 / 1.11^2
= $3,226,158.59
Using excel to calculate
A B
1 Year Cash Flow
2 0 -$40,500,000
3 1 $62,500,000
4 2 -$15,500,000
NPV $3,226,158.59
Excel formula NPV(11%,B3:B4)+B2
Larger IRR 23.28%
Excel formula IRR(B2:B4,0%)
Smaller IRR -68.95%
Therefore the IRRs for this project are :
Larger IRR 23.28%
Smaller IRR -68.95%
Seattle Health Plans currently uses zero-debt financing. Its operating profit is $6 million, and it pays taxes at a 23 percent rate. It has $10 million in assets and, because it is all-equity financed, $10 million in equity. Suppose the firm is considering replacing 59 percent of its equity financing with debt financing that bears an interest rate of 9 percent. What impact would the new capital structure have on the firm's ROE (return on equity)
Answer: ROE increases by 56.5% to 102.7%
Explanation:
ROE before capital structure change:
= Net income / Equity
= (Operating income * ( 1 - tax)) / Equity
= (6,000,000 * (1 - 23%)) / 10,000,000
= 46.2%
With new capital structure:
Debt financing = 59% * 10,000,000
= $5,900,000
Interest = 9% * 5,900,000
= $531,000
Net income = (Operating profit - interest) * ( 1 - tax)
= (6,000,000 - 531,000) * ( 1 - 23%)
= $4,211,130
Return on Equity = 4,211,130 / ( 10,000,000 - 5,900,000)
= 102.7%
Difference:
= 102.7 - 46.2
= 56.5%
g 10. Problems and Applications Q10 Expansionary fiscal policy is more likely to lead to a short-run increase in investment when the investment accelerator is . True or False: Expansionary fiscal policy is more likely to lead to a short-run increase in investment when the interest rate sensitivity of investment is large than when it is small. True False
Answer:
1. True
2. True
Explanation:
An expansionary gap, also known as the inflationary gap in economics is used to measure the difference between the gross domestic product (GDP) and the current level of real Gross Domestic Products that exists when a country's economy is guaged at a full employment rate. This eventually causes the price of goods and services to go up with a low income level. Also, an expansionary fiscal policy will cause the total increase in aggregate demand to be greater than the initial increase in aggregate demand due to the multiplier process.
Additionally, this simply means in an inflationary or expansionary condition, the potential Gross Domestic Products (GDP) is lower than the real Gross Domestic Products.
The investment accelerator effect states that there is an increase in investment expenditure when there is increase in the level of income or demand. Thus, the level of investment in a particular economy is based on the rate of change in consumption and the gross domestic product (GDP).
Hence, when the investment accelerator is large, there's likely to be a short-run increase in investment due to expansionary fiscal policy. The expansionary fiscal policy is usually less when the the interest rate sensitivity of investment is large and consequently, leading to a greater decline in investments.
Sales $ 79,000 $ 65,000 $ 61,000 $ 57,000 $ 50,000 Cost of goods sold 75,900 50,100 49,800 40,200 30,000 Dollar amounts stated are in thousands. a. Compute trend percentages for the above items taken from the financial statements of Lopez Plumbing over a five-year period. Treat 2017 as the base year. b. State whether the trends are favorable or unfavorable.
Answer:
This is a two part question and the answer is given in two separate headings.
Explanation:
Trend Percentages
Year 2021 2020 2019 2018
Sales* 58% 30% 22% 14%
Cost of Goods Sold** 153% 67% 66% 34%
*Sales is calculated by dividing the difference (between current Sales and Base Sales Year) by the Base Sale Year 2017 * 100. Example for 2018 the percentage is 14% [(57,000 - 50,000) / 50,000 * 100]. The same way other years have been calculated.
**Cost of Goods Sold has been calculated by dividing the difference (between current Cost of Goods Sold and Base Year Cost of Goods Sold) by the Base Year Cost of Goods Sold 2017 * 100. Example for 2018 the percentage is 14% [(40,200 - 30,000) / 30,000 * 100]. The same way other years have been calculated.
Trends Favourable or Unfavourable
It is noted that the trend is unfavourable for the five-year period. This is because the sales have been increasing but in comparison to the Cost of Goods Sold the rise is fairly slow. As shown in the above table where sales have increased by only 58% since its inception. However, the Cost of Goods Sold has increased rapidly and by the last trending year the rise in comparison to the base year 2017 was by 153%.
What are products called that are special or different from those grown as commodities?
unique products
salable products
fungible products
differentiated products
Answer:
unique prroducts
Explanation:
A product is a commodity when all units of production are identical, regardless of who produces them. However, to be a differentiated product, a company's product is different than those of its competitors. On the continuum between commodities and differentiated products are many degrees and combinations of the two.
Jan. 15 Declared a $0.40 cash dividend per share to stockholders of record on January 31, payable February 15. Feb. 15 Paid the dividend declared in January. Apr. 15 Declared a 10% stock dividend to stockholders of record on April 30, distributable May 15. On April 15, the market price of the stock was $16 per share. May 15 Issued the shares for the stock dividend. Dec. 1 Declared a $0.50 per share cash dividend to stockholders of record on December 15, payable January 10, 2023. Dec. 31 Determined that net income for the year was $371,000.
Question Completion:
On January 1, 2017, Ayayai Corp. had these stockholders’ equity accounts.
Common Stock ($10 par value, 65,000 shares issued and outstanding) $650,000
Paid-in Capital in Excess of Par Value $480,000
Retained Earnings $600,000
Journalize the transactions. (Include entries to close net income and dividends to Retained Earnings.)
Answer:
Ayayai Corp.
Journal Entries
Jan. 15 Debit Cash Dividends $26,000
Credit Dividends Payable $26,000
To record the declaration of $0.40 cash dividend per share to stockholders of record on January 31, payable February 15.
Feb. 15 Debit Dividend Payable $26,000
Credit Cash $26,000
To record the payment of the cash dividend declared on Jan. 15.
Apr. 15 Debit Stock Dividends $65,000
Credit Dividends Distributable $65,000
To record the declaration of a 10% stock dividend.
May 15 Debit Dividends Distributable $65,000
Credit Common stock $65,000
To record the distribution of the stock dividends.
Dec. 1 Debit Cash Dividends $35,750
Credit Dividends Payable $35,750
To record the declaration of a $0.50 per share cash dividend to stockholders of record on December 15, payable January 10, 2023. 71,500 shares.
Dec. 31 Debit Net income $371,000
Credit Retained Earnings $371,000
To transfer the net income determined to retained earnings.
Dec. 31 Debit Retained Earnings $61,750
Credit Cash Dividends $61,750
To close the cash dividends account to retained earnings.
Dec. 31 Debit Retained Earnings $65,000
Credit Stock Dividends $65,000
To close the stock dividends account to retained earnings.
Explanation:
a) Data and Analysis:
Jan. 15 Cash Dividends $26,000 Dividends Payable $26,000
$0.40 cash dividend per share to stockholders of record on January 31, payable February 15.
Feb. 15 Dividend Payable $26,000 Cash $26,000
Apr. 15 Stock Dividends $65,000 Dividends Distributable $65,000 10% .
May 15 Dividends Distributable $65,000 Common stock $65,000
Dec. 1 Cash Dividends $35,750 Dividends Payable $35,750
$0.50 per share cash dividend to stockholders of record on December 15, payable January 10, 2023. 71,500 shares
Dec. 31 Net income $371,000 Retained Earnings $371,000
Dec. 31 Retained Earnings $61,750 Cash Dividends $61,750
Dec. 31 Retained Earnings $65,000 Stock Dividends $65,000
You decide that structural changes must be made immediately at Holden Evan to deal with the problems caused by the three SBU marketing teams. What should you do? Select an option from the choices below and click Submit. Merge the independent procurement teams of each SBU into a single procurement division serving all product lines. Create a cross-department team to investigate in depth how the problems arose and to offer suggestions on how to deal with them. Merge the three marketing teams of each SBU into a single marketing division serving all product lines.
Answer:
One of the required structural changes that must be made immediately at Holden Evan to deal with the problems caused by the three SBU marketing teams is:
Merge the three marketing teams of each SBU into a single marketing division serving all product lines.
Explanation:
The marketing department is not a product-based team. Therefore, a marketing team should not be tied to just one SBU. The SBU structure can be continued. But the combination of the marketing teams into a single group creates synergy, avoids effort duplication, reduces competitiveness among the various teams, and above all, helping the group' brand managers to utilize accumulated resources, knowledge,and information of the entire marketing organization for the benefit of the different SBUs.
"Using the given information, determine the cost of one no rechargeable alkaline battery; and compare with the cost of one rechargeable NiCad battery. *Assumption: The cost of the electricity to recharge the NiCad is negligible (about $0.01). NiCad batteries can be recharged (reused) 100 times. A 4 pack of AA NiCad rechargeable batteries cost $10.80. A 4 pack of AA alkaline non rechargeable batteries cost $3.69. Over the life of the battery, which battery is most cost effective? Group of answer choices The NiCad AA rechargeable battery The AA alkaline non rechargeable battery Both batteries cost are the same Batteries are independent of chemical composition and therefore does not impact consumer cost structures"
Answer:
Over the life of the battery, the battery that is most cost-effective is:
The AA alkaline non rechargeable battery.
Explanation:
a) Data and Calculations:
Number of times that NiCad batteries can be recharged (reused) = 100 times
Cost of a 4 pack of AA NiCad rechargeable batteries = $10.80
Recharging cost = $1 ($0.01 * 100)
Total cost of AA NiCad rechargeable batteries = $11.80
Cost per use = $0.12 ($11.80/100)
Cost of a 4 pack of AA alkaline non rechargeable batteries = $3.69
Cost per use of AA alkaline non rechargeable batteries = $0.04 ($3.69/100)
b) The comparison and the resulting conclusions are based on the assumption that the non rechargeable and the rechargeable batteries enjoy equal useful life. Therefore, the AA alkaline non rechargeable batteries are also used 100 times.
Batteries are a group of cells that are used in devices so it works as an electric power supply. Batteries can be rechargeable or non-rechargeable.
The correct answer is:
Option B. The AA alkaline non-rechargeable battery.
This can be explained as:
NiCad batteries can be reused = 100 timesPrice of four-pack of AA NiCad batteries = $10.80Recharging value = [tex]\$1 (\$0.01 \times 100)[/tex]The complete price of AA NiCad batteries = $11.80Cost per use for rechargeable batteries = [tex]\$0.12 \; (\dfrac{\$11.80}{100}) = 0.0141[/tex]Price of four packs of AA alkaline non-rechargeable = $3.69Value per use of non-rechargeable batteries = [tex]\$0.04 \; (\dfrac{\$3.69}{100}) = 0.0014[/tex]Therefore, based on the comparison and consequences the AA alkaline non-rechargeable batteries are also utilised many times.
To learn more about non-rechargeable and rechargeable batteries follow the link:
https://brainly.com/question/817968
Which form of currency is a promissory note that is to be paid back with
interest at a certain date?
A. A banknote
B. A government bond
C. A paper dollar
D. A treasury note
Answer:
D.
Explanation:
A treasury note is a form of currency that needs to get paid back with interest at a certain date.
Treasury notes, also known as T-notes, are issued by the US treasury. It earns a fixed interest rate every six months till it gets matured. The treasury notes get issued in terms of 2, 3, 5, 7, and 10 years. By issuing the treasury notes, the US government partially funds itself.
A treasury note is a promissory note that is to be paid back with interest.
Therefore, option D is correct.
Answer:B, a government bond
Explanation:
Just took the test.
given that x is equals to -2 find the value of y and z for the simultaneous equation x+-z=-1, x-2y+z=-7
Answer:
Explanation:
given
x = - 2
Then
x + ( - z) = - 1
-2 - z = - 1
- z = - 1 + 2
z = - 1
now
x - 2y + z = - 7
- 2 - 2y - 1 = - 7
- 3 - 2y = - 7
- 2y = - 7 + 3
- 2y = - 4
y = 2
hope it helps :)
On December 1, Year 1, Childe Company purchased $100,000 of bonds issued by Paperman Company at face value. The bonds mature in ten years. Childe’s intent was to keep the bonds available to sell when cash needs arise in future years. The fair value of those bonds increased to $102,000 on December 31, Year 1. Which of the following statements are correct with regards to this investment? (Select all that apply.) Check All That Apply The bonds should be reported among assets in the balance sheet at December 31, Year 1. The bonds should be reported among assets in the balance sheet at December 31, Year 1. The bonds should be reported at their fair value of $102,000 in the balance sheet. The bonds should be reported at their fair value of $102,000 in the balance sheet. An unrealized holding gain of $2,000 should be included in net income for Year 1. An unrealized holding gain of $2,000 should be included in net income for Year 1. An unrealized gain of $2,000 should be included in other comprehensive income for Year 1.
Answer: A- The bonds should be reported among assets in the balance sheet at December 31, Year 1.
B- The bonds should be reported at their fair value of $102,000 in the balance sheet.
D- An unrealized gain of $2,000 should be included in other comprehensive income for Year 1.
Explanation:
Unibic India: From Fastest Growing Niche Cookie Brand to a Challenger?
In 2007, Lighthouse Funds acquired a 25% stake in Unibic from Unibic Australia for Rs. 200 million. In 2010,
Unibic Australia started making losses and wanted to withdraw from the Indian market. At that time, Unibic
operated solely in the premium, high-margin cookies segment in India, with a share of around 8%. It had a
market presence primarily in south India and was exporting to the Middle East and Hong Kong. It had strategic
alliances to make cookies for various private players. However, it was not yet making profits and was cash-
strapped...
Over the next few years, Unibic grew rapidly. Its growth was primarily fueled by the changes sweeping through
the Indian biscuit industry, wherein glucose biscuits that had dominated the market, gradually lost out to cream
biscuits and cookies. The reasons for the shift included rising disposable incomes leading to an increase in
consumption of premium biscuits; a larger number of manufacturing facilities of premium biscuits; growing
health awareness; innovation bringing in attractive new products; rising affordability of cookies; and increase
in eye-catching packaging...
Over the years, Unibic regularly introduced fresh and unique flavors, ultimately producing over 30 variants of
cookies. Its products could be broadly categorized into chocolate, butter, milk, savory, and health. The company
considered its target market to be between the ages of 14 and 40. It continued its efforts at innovation and
produced new products which would appeal to its target market...
In 2015, Unibic had used celebrity endorsement by signing on south Indian actor Shruti Hassan, for over a year.
It stated that it wanted someone who was relevant and would give the brand a boost to get to the numbers it
wanted in the South...
Unibic didn’t advertise much in print media; TV remained the company’s core focus and got the largest chunk
of its advertising spend, followed by digital and OOH. Instead of following the traditional strategy of having a
similar marketing campaign across markets, Unibic employed a unique strategy in each market, thereby playing
to its strengths in each market while keeping in mind the market conditions and consumption patterns...
From 2019 onward, Unibic started feeling the heat of the economic slowdown in India. The Indian economic
slowdown of 2019 led to a serious and continuing decline in the country’s real estate, automobile and
construction sectors and in overall consumption demand. The second quarter (July- September) of the financial
year (April 2019-March 2020) witnessed a drastic fall in the gross domestic product (GDP) growth rate to 4.5%.
The main reasons attributed to the fall in the GDP growth rate were – contraction in manufacturing activity,
weakened investments, and lower consumption demand.
As of 2020, Unibic had the largest wire cut cookie manufacturing plant in India. The plant had the capability to
manufacture 100 tonnes of cookies each day, with five production lines. While it used 98% of its production
capability to produce its own brand, the rest was used to manufacture for private label brands – six in India and
10 across the world. It had annual revenu7 es of Rs. 5 billion. It also exported its products to more than 21
countries including across Australia, North America, the UK, and Europe, Asia, the Middle East, and New
Zealand. It derived 45% of its earnings from the south of India.
Questions:
a) Explain three factors that had a negative impact on the financial performance of Unibic in its early years.
(6 marks)
b) Which environmental force did Unibic use in segmenting its market? What is this force about? (6 marks)
c) What does the following statement suggest to you about Unibic: “It continued its efforts at innovation
and produced new products which would appeal to its target market”?
d) Which marketing strategy did Unibic use in 2015 and explain any two (2) reasons why firms adopt that
strategy? (9 marks)
e) What main media did Unibic use to implement its marketing strategy? State one advantage of this media.
(6 marks)
Answer:
Explanation:I want an answer
Which person would most likely be in the market for a mortgage loan? Person A: I just got a great new job, so I want to buy a bigger house. I'd like to take out a big loan that I can pay off over a long time while I'm living in the new house. Person B: I want to buy a new video game, but I don't want to take out a real loan. I'd rather just get an advance on my next paycheck so I can buy the game right now. Person C: I just got into medical school, but the tuition is really expensive. I need to borrow some money to pay for school, and I'll pay it back after I start working as a doctor. Person D: I don't need to borrow money right now, but I want to have access to money whenever I might need it. It would be nice to be able to pay off some bigger purchases over time.
Answer:
The answer is A
Explanation:
Mortgage loans are used for houses and real estate.
Person A would be most likely in the mortgage loan market.
What is a mortgage loan?A mortgage loan is a type of borrowed amount taken from a lender for acquiring any kind of property.
Person A takes the mortgage loan from the market as he wants to acquire a new house. He is able to pay off the loan installments as he got a new job which shows that his financial status is good.
Therefore, the mortgage loan is most likely to be taken by Person A from the market.
Learn more about the mortgage loan in the related link:
https://brainly.com/question/15082835
#SPJ2
What factors do you need to consider when choosing financial institution?
Answer:
please give me brainlist and follow
Explanation:
The following key factors will help you to choose the best savings account for your needs:
Interest rate. ...
Minimum cash balance. ...
Presence or network of the bank/financial institution. ...
Service charges / ancillary fees. ...
Debit-card deals. ...
Doorstep banking facilities. ...
Disclaimer: Copyright Kotak Mahindra Bank Ltd.
Which examples demonstrate common qualifications for Quality Assurance careers? Check all that apply.
Claudia designs images and writes text for a product advertisement.
Harrison stands for long periods while checking the quality of a factory’s manufacturing process.
Mercedes inspects products on an assembly line to make sure they meet the company’s standards.
Lyle convinces customers to purchase defective products for a discounted price.
Arturo performs laboratory tests to check for pollution in the area near a factory.
Simone weighs and measures products to make sure they are the right size.
Answer:
2, 3, 6
Explanation:
Answer:
2,3,6 just did it on edge
Explanation:
True or False: Evaluation of a Request for proposal is based solely on price.
Answer:
false.
Explanation:
u help me i help you
This statement is false because there are many factors to be considered except price while evaluating the proposal.
What factors should keep in mind while evaluating a proposal?Evaluation of a proposal measures the progress of the condition between the project started and when the project was completed. To decide how many changes are required to make it successful.
there are many factors to keep in mind while evaluating a proposal are
Price of the projectCustomer review and preferenceThe competitive environmentThe uniqueness of the proposalTherefore this statement is false.
Learn more about the evaluation of the project here:
brainly.com/question/25876712
Technoid Inc. sells computer systems. Technoid leases computers to Lone Star Company on January 1, 2018. The manufacturing cost of the computers was $130,000. This noncancelable lease had the following terms: Lease payments: $23,000 semiannually; first payment at January 1, 2018; remaining payments at June 30 and December 31 each year through June 30, 2022. Lease term: five years (10 semiannual payments). No residual value; no purchase option. Economic life of equipment: five years. Implicit interest rate and lessee's incremental borrowing rate: 5% semiannually. What is the outstanding balance of the lease liability in Lone Star's December 31, 2018, balance sheet
Answer:
$89,350
Explanation:
Calculation to determine the outstanding balance of the lease liability in Lone Star's December 31, 2018, balance sheet
First step is to calculate the Balance after first payment
Initial lease liability $130,000
Less: First payment $23,000
Balance after first payment $107,000
Second step is to calculate the Interest expense for June 30,2021
Interest expense for June 30,2021= $107,000*5%
Interest expense for June 30,2021=$5,350
Third step is to calculate the Principal payment for June 30,2021
Principal payment for June 30,2021=$23,000-$5,350
Principal payment for June 30,2021=$17,650
Now let calculate the Outstanding balance on June
Balance after first payment. $107,000
Less: Principal payment for June $17,650
Outstanding balance on June $89,350
Therefore the outstanding balance of the lease liability in Lone Star's December 31, 2018, balance sheet is $89,350
a stock analyst wants to use a dividend pricing model to value stock. the analyst believes will pay its first dividend in exactly 15 years, and she is guessing that the dividend will be $10.00 per share at that time. the analyst assumes that dividends will grow by 5% per year going forward after year 15. the required return to hold is estimated to be 12% per year. based on these assumptions, what is the intrinsic value of stock today
Answer:
P0 = $27.4044 rounded off to $27.40
Explanation:
The constant growth model of dividend discount model (DDM) can be used to calculate the price of the stock today. DDM calculates the price of a stock based on the present value of the expected future dividends from the stock. The formula for price today under constant growth DDM is,
P0 = D0 * (1+g) / (r - g)
Where,
D0 * (1+g) is the dividend expected in Year 1 or next year g is the constant growth rate in dividends r is the discount rate or required rate of return
To calculate the price of the stock today, we firsts need to calculate the price of the stock in year 15 and discount it back to today's value.
As we can see that to calculate the price of the stock today, we use dividend that is expected for the next period or Year 1. Thus to calculate the price of the stock in Year 15, we will use the dividend that will be expected in Year 16.
P15 = D15 * (1+g) / (r - g)
P15 = 10 * (1+0.05) / (0.12 - 0.05)
P15 = $150 per share
To calculate the price of this stock today, we must discount the Year 15 price to today's price.
P0 = P15 / (1+r)^15
P0 = 150 / (1+0.12)^15
P0 = $27.4044 rounded off to $27.40
How can our perceptions help us to choose the channel for our message?
a.
Sharing our perceptions will encourage our receivers to tell us what channel to use.
b.
Perceptions do not help us to choose the channel for our message.
c.
Perceptions about our receiver can help us to decide on the most appropriate channel.
d.
none of the above
Answer:
b was not correct on edge
Explanation:
During March, Hanks Manufacturing started and completed 30,000 units. In beginning work in process, there were 5,000 units 60 percent complete with respect to conversion costs. Materials are added at the beginning of the process. In EWIP there were 10,000 units 40 percent complete for conversion costs. Using FIFO, the equivalent units of materials and conversion costs are, respectively:
Answer:
Equivalent units
Materials= 40,000 units
Conversion= 36,000 units
Explanation:
Equivalent units are notional whole units which represent incomplete work and are used to apportion cost between work progress and completed work
Equivalent units = Degree of work done(%) × units of inventory
Conversion cost
Item equivalent units
Opening inventory 40% × 5,000 = 2,000
Fully worked units 100% × 30,000= 30,000
Closing inventory 40%× 10,000= 4,000
Total equivalent unit 36,000
Notes
The following notes explains the computation of the items of equivalent unit for conversion cost:
1. DOC for opening inventory is 40% i.e 100%-60%. Remember that 60% work has been done in the previous period, so the balance is to be done in this current period
2. Fully work represent the units of inventory introduced in the current period and completed in the same period. Meaning 100% work was achieved in the period.
3. Closing work is only 40% completed. This represent work started this period but not yet completed.
Material cost
Item equivalent units
Opening inventory 0% × 5,000 = 0
Fully worked units 100% × 30,000= 30,000
Closing inventory 100%× 10,000= 10,000
Total equivalent unit 40,000
Notes
The following notes explains the computation of the items of equivalent unit for Material cost:
1. DOC for opening inventory is 0% i.e 100%-1000%. Remember that materials are added at the beginning. Hence all the materials required for the opening inventory had been added in the previous period
2. Fully work represent the units of inventory introduced in the current period and completed in the same period. Meaning 100% materials was added in the period.
3. All the materials required for the closing inventory were added in this period, hence, 100% degree of completion was used
Equivalent units
Materials= 40,000 units
Conversion= 36,000 units
what are the limitations of SWOT ANALYSIS?
