if earth has an oxidizing environment, what would you expect to happen to if left to sit over time?

Mass of hydrate + crucible = 47.29 g

Mass of anhydrous salt = 2.7 g

Molar mass of anhydrous salt CuSO4 = 159.5 g

Given,

mass of empty crucible = 42.45 g

mass of hydrate salt= 4.84 g

mass of crucible after first heating = 46.1 g

mass of crucible after second heating= 45.153 g

mass of crucible after third heating= 45.15 g

so, as per the question we need to find...

Mass of hydrate + crucible = ? g

Mass of anhydrous salt = ? g

Molar mass of anhydrous salt CuSO4 = ? g

∴Mass of hydrate + crucible = 42.45 + 4.48 = 47.29 g

The given salt is in hydrate form, to remove water from this molecule we need to perform heating .

So we are taking the substance into the crucible as it is in less quantity.

Here, we performed heating 3 times and note the weight after every heating.

After this, assume that the water is totally evaporated and the remaining salt is in anhydrous form,

∴ Mass of anhydrous salt = 45.15 - 42.45 = 2.7 g

To find the molar mass of anhydrous salt of CuSO4,

atomic weight of Cu = 63.5 g

atomic weight of S = 32 g

atomic weight of O =16 g

∴ molar mass of anhydrous salt of CuSO4 = 63.5 + 32 + (16 ×3)

                                                                   =159.5 gm

Learn more about molar mass here...

https://brainly.com/question/837939

#SPJ10

[tex](115.00)(0.25)+(117.00)(0.75)=\boxed{116.50 \text{ u}}[/tex]

225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.

The volume of a substance can be calculated using the following formula:

molarity = no of moles ÷ volume

no of moles of baking soda (NaHCO3) = mass ÷ molar mass

Molar mass of baking soda = 84.007g/mol

no of moles = 15g ÷ 84.007g/mol = 0.18mol

0.8 = 0.18/volume

volume = 0.23L equivalent to 225mL

Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.

Learn more about volume at: https://brainly.com/question/1578538

#SPJ1

225 millilitres of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.

Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.

[tex]Molality = \frac{Moles \;solute}{Volume of solution in litre}[/tex]

[tex]Moles of baking soda (NaHCO_3) =\frac{mass}{molar \;mass}[/tex]

Molar mass of baking soda = 84.007g/mol

[tex]Moles of baking soda (NaHCO_3) =\frac{15g}{84.007g/mol}[/tex]

[tex]Moles of baking soda (NaHCO_3) = 0.18mol[/tex]

Now, calculating volume with the molarity formula:

Molality = [tex]\frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]

0.8 = [tex]\frac{0.18 }{Volume \;of \;solution \;in \;litre}[/tex]

Volume = 0.23L equivalent to 225mL

Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.

Learn more about volume at:

brainly.com/question/1578538

#SPJ1

When the circuit is opened, a spark is much more possible.

The primary purpose of an inductor is the storage of energy. This is why an inductor helps to eliminate a spark in a circuit.

In the circuit as described in the question, we know that there is no current when the circuit is closed, the current across the inductor remains constant but rapidly decreases at the opening of the circuit this could lead to a spark.

Learn more about an inductor:https://brainly.com/question/15893850

#SPJ11

Answer:

02 or oxygen if im not mistaken

Answer:

The energy will be added  

Explanation:

Cupric oxide (CuO) and cuprous oxide (Cu2O) are the names of two oxides of copper.

Both Cupric oxide (CuO) and cuprous oxide are different from one another because of the presence of number of copper atom. In one compound, copper is bonded with oxygen in 1:1 form whereas in the other compound, the copper is bonded with 2:1 form.

So we can conclude that Cupric oxide (CuO) and cuprous oxide (Cu2O) are the names of two oxides of copper.

Learn more about copper here: https://brainly.com/question/24856041

#SPJ1

Answer:

The unknown metal could be calcium or magnesium.

Explanation:

Displacement of a metal from its chemical reaction is shown by the reaction known as single displacement reaction. The reactivity of metal is determined by the reactivity series. The metals lying above in the series are more reactive than the metals which lie below in the reactivity series.

Metal B is more reactive than metal A.

The metal which easily displaced aluminium will lie above in the series but that same element cannot displace sodium, so it will lie below in the series.

Hence, from the series, we conclude that the unknown metal could be calcium or magnesium.

Based on the mass ratio, the mass of H₂ produced is 3.51 g of H₂

The mass ratio of a reaction is the ratio of the masses of the reactants as well as as products in a balanced equation of a reaction.

The equation of the reaction is given below;

2 AI + 6 HCI → 2 AICI₃ + 3 H₂

From the reaction equation, 2 * 27 g of Al produces 3 * 2 g of H₂

32.25 g of Al will produce: 6/55 * 32.25 g of H₂

Therefore, mass of H₂ produced is 3.51 g of H₂

Learn  more about mass ratio at: https://brainly.com/question/14577772

#SPJ1

Answer:

From the reaction equation, 2 * 27 g of Al produces 3 * 2 g of H₂

32.25 g of Al will produce: 6/55 * 32.25 g of H₂

Therefore, mass of H₂ produced is 3.51 g of H₂

Explanation:

The number of calories which are absorbed when water absorbs 6.55 KJ of energy is 1565.49 calories

To know the number of calories which are absorbed when water absorbs 6.55 KJ of energy, we shall begin by converting 6.55 KJ to joules (J). Details below:

1 KJ = 1000 J

Therefore,

6.55 KJ = (6.55 KJ × 1000 J) / 1 KJ

6.55 KJ = 6550 J

Finally, we shall convert 6550 J to calories. This is illustrated below:

4.184 J = 1 calorie

Therefore,

6550 J = (6550 J × 1 calorie) / 4.184 J

6550 J = 1565.49 calories

Thus, from the above calculations, we can conclude that the number of calories absorbed is 1565.49 calories

Learn more about conversion:

https://brainly.com/question/28645760

#SPJ1

Answer:

Explanation:

i ned help

Taking into account the reaction stoichiometry, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.

In first place, the balanced reaction is:

2 AgNO₃ + Zn → 2 Ag + Zn(NO₃)₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 1 mole of Zn reacts with 2 moles of AgNO₃, 5 moles of Zn reacts with how many moles of AgNO₃?

[tex]amount of moles of AgNO_{3}= \frac{5 moles of Znx2 moles of AgNO_{3}}{1 mole of Zn}[/tex]

amount of moles of AgNO₃= 10 moles

But 10 moles of AgNO₃ are not available, 8 moles are available. Since you have less moles than you need to react with 5 moles of Zn, AgNO₃ will be the limiting reagent.

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 2 moles of AgNO₃ form 2 moles of Ag, 8 moles of AgNO₃ form how many moles of Ag?

[tex]amount of moles of Ag=\frac{8 moles of AgNO_{3}x2 moles of Ag }{2 moles of AgNO_{3}}[/tex]

amount of moles of Ag= 8 moles

Then, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Answer:

D. C₄H₁₀ and C₂H₅

A chemical formula indicating the elements of a compound and their relative proportions, as (CH₂O)n.

Since an empirical formula indicates the ratio (proportions) of the elements in the compound, it can be used, along with the molar weight of the compound, to determine the molecular formula.

The empirical formula provides the smallest whole-number ratio among elements or compounds within a molecular compound. A compound is a chemical formed from atoms of different chemical elements.

Hence, Option D is correct.

#SPJ2

Avogadro's law states that in one mole of a substance, there are [tex]6.022 \times 10^{23}[/tex] molecules.

This means that in 1.55 moles, there are [tex]1.55(6.022 \times 10^{23})=\boxed{9.33 \times 10^{23} \text{( to 3 sf)}}[/tex]

Number 2 represents this process on the hydrologic cycle diagram. Therefore, the correct option is option B.

One of the most significant natural processes is the hydrologic cycle, which we may often take for granted. This process causes the water in the entire earth to change forms, locations, or accessibility.

Water transitions between three distinct forms during this cycle, to put it simply. It can be found in many states of liquid, gas, or solid, including ice, steam, and water. Water will frequently transition between these three states throughout the cycle: freezing into ice, melting into water, evaporating becoming water vapor, but finally condensing back into water. Number 2 represents this process on the hydrologic cycle diagram.

Therefore, the correct option is option B.

To know more about hydrologic cycle, here:

https://brainly.com/question/1338837

#SPJ5

The relationship between [tex][Ca2^{2+}][/tex] and [tex][OH^{-}][/tex] in this mixture is that there are 2 mole of hydroxide ions for every 1 mole of calcium ions.

The solubility of a solute is the amount of solute that can dissolve in a given volume of solvent at a particular temperature.

Calcium hydroxide is partially soluble in water. The dissolution of calcium hydroxide in water produces calcium ions and hydroxide ions.

The equation  of the reaction is given below:

[tex]Ca(OH)_{2} \leftrightharpoons Ca^{2+} + 2\:OH^{-}[/tex]

Based on the equation of reaction, there are 2 mole of hydroxide ions for every mole of calcium ions.

Learn more about solubility at: https://brainly.com/question/7176737

#SPJ11

Answer: Fe2O3

Explanation: By applying crisscross method, the formula will be Fe2O3.

Answer:

V = 25.7 L

Explanation:

To find the volume of Argon (Ar), you need to use the Ideal Gas Law equation. This looks like:

PV = nRT

In this formula,

        > P = pressure (atm)

        > V = volume (L)

        > n = number of moles

        > R = constant (0.0821 L*atm/K*mol)

        > T = temperature (K)

While there is a different constant that can be used if you want to keep the pressure in mmHg, there is a more common constant used when the pressure is in atm. So, to find the volume, you need to (1) convert mmHg to atm (by dividing by 760) and then (2) calculate the volume (using Ideal Gas Law).

(Step 1)

600 mm Hg              1 atm
-------------------  x  ---------------------  =  0.789 atm
                              760 mm Hg

(Step 2)

PV = nRT

(0.789 atm) x V = (0.825 mole)(0.0821 L*atm/K*mol)(300 K)

(0.789 atm) x V = 20.32

V = 25.7 L

The number of moles of [tex]Na_2SO_4[/tex] form from 5.0 moles [tex]Na_2S[/tex] is 5 moles.

Limiting reactants are those reactants that are completely used up in a chemical reaction.

4.0 mol [tex]Na_2S[/tex] will be completely used since the combining ratio is 1 : 1 : 1.

[tex]Na_2S + CuSO_4[/tex] ->[tex]Na_2SO_4 + CuS[/tex]

From the chemical equation above, 5.0 moles [tex]Na_2S[/tex] will yield 5 moles of [tex]Na_2SO_4[/tex].

Learn more about limiting reactants here:

brainly.com/question/14222359

#SPJ1

Answer:

newtons law states that every body in the universe attracts every other body with a force which is directly proportional to the product of their masses and inversely proportional to square of the distance between their centers

Answer:

an object at rest tends to stay at rest

Answer:

500ml or 0.5l

Explanation:

The concentration is 0.40 M so there are 0.40 moles in 1 l of the solution.

0.40 moles -> 1 l

but we have to go to 0.20 moles, 0.40/2 = 0.20 moles but we have to divide the volume also by 2 that makes 0.5 liters.

Answer: 0.5

Explanation:

The concentration is 0.40 M so there are 0.40 moles in 1 l of the solution.

0.40 moles -> 1 l

but we have to go to 0.20 moles, 0.40/2 = 0.20 moles but we have to divide the volume also by 2 that makes 0.5 liters.

Explanation:

The SI Unit of sound is decibel.

or we can say that

The SI Unit of sound is watt per square metre (i.e.w/m2).

Answer:

c

Explanation:

in kc we only consider gases and aquas not solids and liquids

24.25 moles of NO can be produced using 97 moles of HNO3.

Equal numbers of atoms from various elements are present in both the reactants and the products in balanced chemical equations. Varied elements' atom counts in the reactants and products of unbalanced chemical equations are different.

3 Cu + 8HNO3 g → 3 Cu(NO3)2 + 2 NO + 4 H2O

The number of moles consumed can be calculated using comparing with coefficients in the balanced reaction .

So , from above eq we get that 8 moles of HNO3 are consumed to make 2 moles of NO.

⇒  8 HNO3⇔2 NO

⇒ 1 HNO3⇔ 1/4 NO

This means that for each mole of HNO3 produces 1/4 moles of NO.

So , for 97 moles of HNO3 , [tex]\frac{1}{4} *97[/tex] moles of NO can be made,

So, total moles of NO made are 24.25 moles.

Lean more about balanced reactions here https://brainly.com/question/26694427

#SPJ10

24.25 moles of NO would be made when 97 moles of [tex]HNO_{3}[/tex] are consumed

Given reaction:

[tex]3 Cu + 8HNO_{3} - > 3 Cu(NO_{3})_{2} + 2 NO + 4 H_{2}O[/tex]

As the given reaction is already balanced so we don't need to balance it

In a balanced chemical reaction the ratio of reactants consumed and products formed always remains constant.

∵ In the given Reaction we can analyse for 8 moles [tex]HNO_{3}[/tex] consumed 2 moles of [tex]NO[/tex] are being produced.

Assuming [tex]x[/tex] moles of [tex]NO[/tex] being produced when [tex]97[/tex] moles [tex]HNO_{3[/tex] produced

∵ Ratio remains constant

⇒[tex]\frac{HNO_{3} Consumed}{NO Produced} = \frac{8}{2} =\frac{97}{x}[/tex]

⇒[tex]x=\frac{97}{4}=24.25[/tex] moles

∴ 24.25 moles of [tex]NO[/tex] would be made.

Learn more about Stoichiometry here:

https://brainly.com/question/16060223

#SPJ10

Enrichment of uranium-235 is done. Hence, option A is correct.

The act, process, or means of keeping something within limits the containment of health costs.

Enrichment is a process of increasing the proportion of fissile isotope found in uranium ore (represented by the symbol 'U') to make it usable as nuclear fuel or the compressed, explosive core of nuclear weapons.

Hence, option A is correct.

Learn more about containment here:

https://brainly.com/question/3299455

#SPJ1

Answer:

0,218 moles

Explanation:

I will first explain how many liters is 256ml, that is 0,256 l.

because the m stands for milli which is a factor of 1000 -> (256 ml / 1000 = 0,256 l)

To calculate the amount of moles you multiply the volume with the concentration. So 0,256l x 0,855M = 0,218 moles.

Answer: 0.256

Explanation:

Answer:

"A", "water changes from a gas to a solid to a liquid", according to this phase diagram, at at 0°C, as pressure is increased from 0atm to 10atm.

Explanation:

The question asks what happens at 0°C, as pressure is increased from 0atm to 10atm.

According to the question, the temperature is held constant.  The pressure changes.  In the phase diagram, we find the temperature 0°C on the horizontal axis, and all points where the temperature are 0°C are along that vertical line.

Since the pressure starts at 0atm and increases to 10atm, we start at the bottom, and move upward along that line, to see what phases of matter the substance changes to.

At the bottom, it is initially in a "gas" phase.  As it moves up, it transitions to a "solid" phase.  Later, as it continues moving up, it changes again into a "liquid" phase.

Thus, the answer would be "A", "water changes from a gas to a solid to a liquid", according to this phase diagram, at at 0°C, as pressure is increased from 0atm to 10atm.