Answer:
0.745 moles
Explanation:
We can use the ideal gas law, which relates the pressure (P), volume (V), number of moles (n), and temperature (T) of a gas:
P V = n R T
where R is the gas constant.
We can rearrange this equation to solve for n:
n = (P V) / (R T)
We can look up the value of the gas constant for units of atm L / (mol K). The value is approximately 0.08206 (atm L) / (mol K).
Substituting the given values, we get:
n = (1.71 atm) * (12.85 L) / (0.08206 (atm L) / (mol K) * (68.16 + 273.15) K)
where we have converted the temperature from Celsius to Kelvin by adding 273.15.
Evaluating this expression gives us:
n ≈ 0.745 mol
Therefore, there are approximately 0.745 moles of gas in the sample.
I2 + N2H4==> HI + N2 according to the reaction ,How many grams of HI are obtained if 115.7 g of N2H4 reacts with
an excess of iodine?
The mass of the HI that is produced is 1843 g
What is stoichiometry?Stoichiometry is a branch of chemistry that focuses on the quantitative relationships in chemical reactions between reactants and products.
What is the number of moles?
Number of moles of [tex]N_{2} H_{4}[/tex] = 115.7 g/32 g/mol
= 3.6 moles
Now we have that the balanced reaction equation is;
[tex]N_{2} H_{4} + 2I_{2} --- > N_{2} + 4 HI[/tex]
If 1 mole of [tex]N_{2} H_{4}[/tex] produces 4 moles of HI
3.6 moles of [tex]N_{2} H_{4}[/tex] will produce 3.6 * 4/1
= 14.4 moles of HI
Mass of HI produced = 14.4 moles * 128 g/mol
= 1843 g
Learn more about stoichiometry:https://brainly.com/question/30215297
#SPJ1
Lab: Limiting Reactant and Percent Yield
Step 7: Determine the Limiting Reactant (Trial 2)
Analysis: aluminum
there is no aluminum left
yes
Convert Mass:
2.50g=.019
.25g=.0093
The limiting reactants is/are aluminum.
Are these answers correct?
Yes they are I did the lab.
The given answer statement "there is no aluminum left" and " limiting reactants is aluminum" are correct.
In the analysis of Trial 2, it was found that there was no aluminum left after the reaction had taken place. This indicates that all of the aluminum had reacted with the copper (II) chloride and that it was the limiting reactant in the reaction.
To confirm this, the mass of each reactant was converted to moles using their respective molar masses. It was found that the aluminum had a smaller number of moles than the copper (II) chloride, indicating that it would be used up first and thus be the limiting reactant.
Therefore, the limiting reactant in Trial 2 was aluminum.
To learn more about limiting reactants here
https://brainly.com/question/14225536
#SPJ1
A solution contains 0.0400 M Ca2+ and 0.0990 M Ag+. If solid Na3PO4 is added to this mixture, which of the phosphate species would precipitate out of solution first? Ca3(PO4)2
Ag3PO4
Na3PO4
When the second cation just starts to precipitate, what percentage of the first cation remains in solution?
When the second cation first starts to precipitate, 80.8% of Ca²⁺ will still be in solution.
What is cation?A cation is an ion with a positive charge. It is formed when an atom loses one or more of its electrons, resulting in a net positive charge. Cations are attracted to anions (ions with a negative charge) due to their opposite charges. Cations are found in many different substances, including acids, bases, and salts.
Ca₃(PO₄)₂ will be the first species that separates out of solution when solid Na₃PO₄ is introduced to the mixture. This is due to Ca3(PO4)2 having a substantially lower solubility than Ag₃PO₄ and Na₃PO₄.
The proportion of the first cation (Ca²⁺ ) still in solution when the second cation (Ag⁺) is just beginning to precipitate will depend on the starting concentrations of the two cations. In this instance, the starting concentrations of Ca²⁺ and Ag⁺ are 0.0400 M and 0.0990 M, respectively. Therefore, 80.8% of Ca²⁺ will still be in solution when its second cation first begins to precipitate.
To learn more about cation
https://brainly.com/question/30754382
#SPJ1
Which of these would be the least dense?Marble
Feather
Coin
Phone
The feather is the least thick of the bunch. This is due to the fact that density is defined as mass per unit volume.
A feather has a relatively low mass compared to its volume, due to its porous and lightweight nature. Marble, coin, and phone all have substantially higher densities than a feather since they are constructed of denser materials such as stone, metal, and plastic/electronics.
As a result, when the density of these things is compared, the feather is the least dense.
Because it has a significantly smaller mass than the other objects listed, the feather would be the least dense. Because density is defined as mass per unit volume, an object with a lower mass and the same or greater volume has a lower density.
The stone, coin, and phone all have greater masses and thus higher densities than the feather. However, because density varies based on the exact material used, the relative densities of these things may change if they are made of different materials.
learn more about Dense here
https://brainly.com/question/1354972
#SPJ1
50cm³ of 1.0M hydrochloric acid reacted with excess zinc. i) Write the equation for the reaction. ii) How many mole of aqueous hydrogen ions were present in the acid solution? iii) Calculate the volume of gas evolved at s.t.p. [Molar volume = 22.4 dm³ at s.t.p. of gas].
i) The equation for the reaction between hydrochloric acid and zinc is:
[tex]Zn + 2HCl → ZnCl2 + H2[/tex]
ii) n(HCl) = C × V = 1.0M × 0.05 L = 0.05 moles
iii) The volume of gas evolved at STP is 0.544 L or 544 mL.
The concentration of hydrochloric acid is 1.0M, which means that there is 1 mole of hydrochloric acid in 1 liter (1000 cm³) of solution. The volume of the hydrochloric acid used is 50 cm³, which is 0.05 liters.
According to the stoichiometry of the reaction, each mole of hydrochloric acid produces one mole of hydrogen ions, so the number of moles of hydrogen ions in the solution is also 0.05 moles.
The volume of gas evolved can be calculated from the ideal gas law:
PV = nRT
where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the gas constant (0.0821 L·atm/K·mol), and T is the temperature of the gas in Kelvin. At standard temperature and pressure (STP), the pressure is 1 atm and the temperature is 273 K. The molar volume of a gas at STP is 22.4 L/mol.
From the equation for the reaction, we know that one mole of hydrogen gas is produced for every two moles of hydrochloric acid used. Therefore, the number of moles of hydrogen gas produced is:
n(H2) = 0.5 × n(HCl) = 0.5 × 0.05 moles = 0.025 moles
Using the ideal gas law, we can calculate the volume of hydrogen gas produced at STP:
V(H2) = n(H2) × RT/P = 0.025 mol × 0.0821 L·atm/K·mol × 273 K/1 atm = 0.544 L
For more questions on reactions
https://brainly.com/question/29470602
#SPJ11
Review-Chemical Reactions
Write balanced chemical equations for the following reactions:
a. chlorine gas and aqueous sodium iodide react to form aqueous sodium chloride and
solid iodine
b. solid sodium chlorate is heated to form solid sodium chloride and oxygen gas
c. solid potassium reacts with liquid water to produce aqueous potassium hydroxide and
hydrogen gas
Answer:
a. Cl2 (g) + 2NaI (aq) → 2NaCl (aq) + I2 (s)
b. 2NaClO3 (s) → 2NaCl (s) + 3O2 (g)
c. 2K (s) + 2H2O (l) → 2KOH (aq) + H2 (g)
Explanation:
What was the effect of the addition of FeCl3 to the sample solution in the dichromate titration? Explain
[tex]FeCl_3[/tex] is added to ensure all reducing agent is oxidized, indicating endpoint in dichromate titration.
In a dichromate titration, [tex]FeCl_3[/tex] is frequently added to the example arrangement as a sign of the endpoint. The expansion of [tex]FeCl_3[/tex] to the example arrangement assists with guaranteeing that the lessening specialist has been all oxidized by the potassium dichromate ([tex]K_2Cr_2O_7[/tex] ) arrangement.
[tex]FeCl_3[/tex] responds with any overabundance[tex]K_2Cr_2O_7[/tex] in the answer for structure a red-earthy colored encourage of[tex]Fe(OH)_3[/tex] , demonstrating that the lessening specialist has been all oxidized. This response is known as a "back-titration" since overabundance[tex]K_2Cr_2O_7[/tex] is added to the arrangement, trailed by the option of [tex]FeCl_3[/tex] to decide how much unreacted [tex]K_2Cr_2O_7[/tex] .
The response somewhere in the range of [tex]FeCl_3[/tex] and [tex]K_2Cr_2O_7[/tex] can be addressed as:
[tex]6FeCl_3 + K_2Cr_2O_7 + 7H_2SO_4 → 3Fe_2(SO_4)_3 + Cr_2(SO_4)_3 + K_2SO_4 + 7H_2O + 3Cl_2[/tex]
The [tex]FeCl_3[/tex] goes about as a pointer in this response since it responds with the overabundance [tex]K_2Cr_2O_7[/tex] until the decreasing specialist has been all oxidized. As of now, the red-earthy colored encourage of [tex]Fe(OH)_3[/tex] structures, showing that the endpoint has been reached.
Without the expansion of [tex]FeCl_3[/tex], it would be challenging to precisely decide the endpoint of the titration. The expansion of [tex]FeCl_3[/tex] is important to guarantee that the lessening specialist has been all oxidized and that the endpoint has been reached, considering a more exact assurance of the grouping of the diminishing specialist in the example arrangement.
In outline, the expansion of [tex]FeCl_3[/tex] to the example arrangement in a dichromate titration is significant in light of the fact that it assists with guaranteeing that the decreasing specialist has been all oxidized, considering a more precise assurance of its focus.
To learn more about dichromate titration, refer:
https://brainly.com/question/29864589
#SPJ4
The complete question is -
What is the reason for a dichromate titration, and how does [tex]FeCl_3[/tex]support deciding the endpoint of the titration? Might you at any point give the compound condition to the response somewhere in the range of [tex]FeCl_3[/tex] and [tex]K_2Cr_2O_7[/tex] and make sense of why [tex]FeCl_3[/tex] goes about as a marker in this response?
Explain how your model is different from the model in the picture.
My model is distinct from the model in the image in that it takes a more thorough and all-encompassing approach to comprehending the fundamental parts of a system.
It considers the interactions between various system elements as well as the connections between those elements and their surroundings. It also looks at how the system changes over time, and how different components interact with each other.
As a result, the system may be understood more precisely, and management choices can be made with more knowledge. In order to offer a more precise and current picture of the system, my model also integrates the most recent research and technological advancements.
Learn more about elements at:
https://brainly.com/question/14347616
#SPJ1
If the initial temperature of an ideal gas at 2.250 atm
is 62.00 ∘C,
what final temperature would cause the pressure to be reduced to 1.700 atm?
Calculate the amount of energy (in kJ) required to increase the temperature of 255 g of water from 25.2 C to 90.5 C. Specific heat of water is 4.184J/g C.
Answer:
70.91 kJ
Explanation:
The amount of energy (in kJ) required to increase the temperature of 255 g of water from 25.2 C to 90.5 C can be calculated using the formula:
Q = m * c * ΔT
Where Q is the amount of energy, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.
Substituting the given values:
m = 255 g
c = 4.184 J/g C
ΔT = (90.5 - 25.2) C = 65.3 C
Q = 255 g * 4.184 J/g C * 65.3 C
Q = 70905.564 J
Q = 70.91 kJ (rounded to two decimal places)
Therefore, the amount of energy required to increase the temperature of 255 g of water from 25.2 C to 90.5 C is 70.91 kJ.
The article talks mainly about A. Dr. Dituri's small underwater habitat B. Dr. Dituri's Project Neptune 100 C. Dr. Dituri's talks with other scientists D. Dr. Dituri's 28 years in the U.S. Navy
We see here that the article is actually talking about: B. Dr. Dituri's Project Neptune 100.
What is an article?A piece of writing known as an article is typically printed in a newspaper, magazine, or journal. It may address a variety of subjects, such as news, features, essays, research findings, and reviews.
We can see here that in the article, being referred to in the question is known as "A Chat With the Scientist Living Underwater for 100 Days,".
From the article, it is very clear that it refers to Dr. Dituri's Project Neptune 100. Retired Navy officer, Joseph Dituri is seeking to break the current record for longest period of time spent submerged.
Note: I can't post the article here. But I have provided the title of the article above.
Learn more about article on https://brainly.com/question/26859358
#SPJ1
A platinum ring is composed of 2.35×1023 atoms. Calculate the mass of the ring in grams.
The mass of the platinum ring is 76.0 grams.
To calculate the mass of the platinum ringWe need to know the molar mass of platinum and the number of platinum atoms in the ring.
The molar mass of platinum (Pt) is 195.08 g/mol.
The number of platinum atoms in the ring is 2.35×10^23.
Now we can use the following formula to calculate the mass of the ring:
mass = (number of atoms) x (atomic mass) / Avogadro's number
where Avogadro's number is 6.022 x 10^23 mol^-1.
Substituting the values:
mass = (2.35×10^23 atoms) x (195.08 g/mol) / (6.022 x 10^23 mol^-1)
mass = 76.0 g
Therefore, the mass of the platinum ring is 76.0 grams.
Learn more about molar mass here : brainly.com/question/30459977
#SPJ1
Which of these are part of the
Earth's lithosphere?
O clouds
O glaciers
O mountains
O water vapor
100 grams of 4 degree celsius water is heated until its temperature is 37 degrees celsius. If the specific heat of water is 4.18 J/g degrees celsius, calculate the amount of heat energy needed to cause this rise in temperature.
To calculate the amount of heat energy needed to cause the rise in temperature, you can use the formula:
Q = mcΔT
Where Q represents the heat energy, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Given:
m = 100 grams
c = 4.18 J/g°C
Initial temperature (T1) = 4°C
Final temperature (T2) = 37°C
First, find the change in temperature (ΔT):
ΔT = T2 - T1 = 37°C - 4°C = 33°C
Now, plug the values into the formula:
Q = (100 g) × (4.18 J/g°C) × (33°C)
Q = 13794 J
So, the amount of heat energy needed to cause this rise in temperature is 13,794 Joules.
For more questions on:energy
https://brainly.com/question/13881533
#SPJ11
Predict which of the following reactions has a positive change in entropy.
I. 2N2(g) + O2(g) → 2N2O(g)
II. CaCO3(s) → CaO(s) + CO2(g)
III. Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
Answer:
Explanation:
The change in entropy of a system can be determined by comparing the entropy of the reactants to the entropy of the products. The reaction that leads to an increase in the number of moles of gas or particles will generally have a positive change in entropy.
I. 2N2(g) + O2(g) → 2N2O(g)
The reactants have 3 moles of gas, while the product also has 3 moles of gas. Therefore, there is no change in the number of moles of gas, and the change in entropy is likely to be small.
II. CaCO3(s) → CaO(s) + CO2(g)
The reactant is a solid, while the products are a solid and a gas. The formation of a gas from a solid leads to an increase in the number of moles of particles, and therefore an increase in entropy.
III. Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)
The reactants consist of a solid and a liquid, while the products consist of an aqueous solution and a gas. The formation of a gas leads to an increase in the number of moles of particles, and therefore an increase in entropy.
Therefore, reactions II and III have a positive change in entropyentropy
Chemistry. . . Reaction: AB₂C (g) → B₂ (g) + AC (g), find the value of K
At equilibrium [AB₂C]=0.0168 M, [B₂]= 0.007 M, and [AC] = 0.0118 M
The value of K at equilibrium, for the reaction is 0.0049
How do i determine the value of K at equilibrium?First, we shall list out the given parameters from the question. This is shown below:
AB₂C (g) ⇌ B₂(g) + AC(g) Concentration of AB₂C, [AB₂C] = 0.0168 MConcentration of B₂, [B₂]= 0.007 MConcentration of AC, [AC] = 0.0118 MEquilibrium constant (K) =?Equilibrium constant is defined as:
Equilibrium constant = [Product]ᵐ / [Reactant]ⁿ
Where
m is the coefficient of productsn is the coefficient of reactantsWith the above formula, we can obtain the equilibrium constant, K as follow:
Equilibrium constant, K = [B₂][AC] / [AB₂C]
K = (0.007 × 0.0118) / 0.0168
K = 0.0049
Thus, the equilibrium constant, K for the reaction is 0.0049
Learn more about equilibrium constant:
https://brainly.com/question/16589765
#SPJ1
Identify the reagent that is used to confirm the presence of each of the following:
a. CO32-: [C]
b. S2-: [S]
c. I-: [I]
a. [C]: [tex]HCl[/tex] or any other strong acid b. [S]: Lead acetate or any other heavy metal salt c. [I]: Lead nitrate or silver nitrate
a. To confirm the presence of [tex]CO_32[/tex]-, a solution of dilute [tex]HCl[/tex] (hydrochloric acid) is added. If [tex]CO_32[/tex]- is present, it will react with the [tex]HCl[/tex] to produce [tex]CO_2[/tex] gas, which can be identified by bubbling it through limewater [tex](Ca(OH)_2)[/tex].
b. To confirm the presence of [tex]S_2[/tex]-, a solution of lead acetate [tex](Pb(CH_3COO)_2)[/tex] is added. If [tex]S_2[/tex]- is present, it will react with the lead acetate to produce a black precipitate of lead sulfide ([tex]PbS[/tex]).
c. To confirm the presence of I-, a solution of chlorine water ([tex]Cl_2[/tex] in water) is added. If I- is present, it will react with the chlorine to produce a brown color, which is due to the formation of iodine (I2).
For more such questions on metal, click on:
https://brainly.com/question/4701542
#SPJ11
If the average speed of an oxygen molecule is 4.37 ✕ 104 cm/s at 25°C, what is the average speed of a CO2 molecule at the same temperature?
The average speed of a gas molecule is proportional to the square root of its temperature and inversely proportional to the square root of its molar mass. Therefore, we can use the following equation to find the average speed of a CO2 molecule at the same temperature:
v2/v1 = sqrt(M1/M2)
where v1 and v2 are the average speeds of the oxygen and CO2 molecules, respectively, M1 and M2 are the molar masses of oxygen and CO2, respectively.
The molar mass of oxygen (O2) is 32 g/mol, and the molar mass of CO2 is 44 g/mol.
We are given that the average speed of an oxygen molecule is 4.37 × 10^4 cm/s at 25°C. We can convert the temperature to Kelvin by adding 273.15 to get:
T = 25°C + 273.15 = 298.15 K
Now we can solve for v2:
v2 = v1 * sqrt(M1/M2)
v2 = 4.37 × 10^4 cm/s * sqrt(32 g/mol / 44 g/mol)
v2 = 3.67 × 10^4 cm/s
Therefore, the average speed of a CO2 molecule at the same temperature is 3.67 × 10^4 cm/s.
A bag of potato chips is sealed in a factory near seal level. The atmospheric pressure is 99.82 kPa. What is the difference in Pa between the pressure in the bag and the atmospheric pressure?
The difference in Pa between the pressure in the bag and the atmospheric pressure is 1.505 kPa.
How to obtain the difference in pressureTo obtain the difference in pressure, we first need to know the atmospheric pressure near sea level. This is 760 mm Hg. When we convert this to pascals, we will have, 101.32472 kPa.
Now, the difference in pressure will be obtained by subtracting the atmospheric pressure in the bag from the atmospheric pressure near sea level and this is:
101.32472 kPa - 99.82 kPa
= 1.505 kPa.
Learn more about pressure here;
https://brainly.com/question/28012687
#SPJ1
Dimensional analysis with shapes
The surface area of the rectangular prism is 0.034 square meters.
For a rectangular prism with length l, width w, and height h, the surface area is:
Surface area = 2lw + 2lh + 2wh
Substituting the given values, we get:
Surface area = 2(10 cm x 5 cm) + 2(10 cm x 8 cm) + 2(5 cm x 8 cm)
Surface area = 100 cm² + 160 cm² + 80 cm² = 340 cm²
We can use dimensional analysis. So the conversion factor is:
1 m² / 10,000 cm²
Multiplying the surface area by this conversion factor, we get:
Surface area = 340 cm² x (1 m² / 10,000 cm²)
Surface area = 0.034 m²
To know more about rectangular prism, here
brainly.com/question/21308574
#SPJ1
--The complete Question is, What is the surface area of a rectangular prism that has a length of 10 cm, a width of 5 cm, and a height of 8 cm? Use dimensional analysis to convert the answer to square meters--
please help me with this lab i wasn’t here for!
3. now that you have the mass of the NaHCO3 reactant, and the mass of the product NaCI , convert each to moles and compare to the mole ratio from your balanced equation C space below for your calculations
mass NaHCO3:
mass NaCI:
moles NaHCO3:
moles NaCI:
does the mole to mole ratio for your reaction? Agree with the ratio for the balanced equation?___
4. which reactant is the excess reactant for your reaction, how do you know?
5. Using the limiting reactant calculate the maximum amount of product that can be made from this reaction.
6. using the theoretical yield in the mass of the product that you put produce calculate percent yield.
calculations:
question #3: converting mass to moles
question #5: calculating the theoretical yield
question #6: calculating percent yield
Question #3: 0.8 g of NaHCO3 mass NaCI weight: 0.4 g 0.8 g/84 g/mol, or 0.0095 moles, of NaHCO3 0.4 g/58.5 g/mol = 0.0068 moles of NaCI are the moles.
The reaction's mole to mole ratio and the ratio in the balanced equation (1:1) are in agreement. The highest quantity of NaCI that may be produced from this reaction is 0.0095 moles since NaHCO3 is the limiting reactant.
The theoretical yield of NaCI is 0.0095 moles, which is question #6. The finished product weighs 0.4 g. The percent yield is 0.4 g/0.0095 moles times 100, which is 42.1%.
Learn more about moles at:
https://brainly.com/question/26416088
#SPJ1
Can someone explain the Glyceraldehyde structure for me in detail please. I read that the first carbon atom is the only asymmetric one out of all three carbons and that the other two carbons do have four attachments that just aren’t different. I can’t even see how the atoms have four attachments though.
Answer:
Glyceraldehyde is a simple sugar with three carbon atoms attached to hydroxyl and hydrogen or carbonyl groups. The first carbon atom has four different groups, including an aldehyde group, which makes it asymmetric. This results in two stereoisomers, D-glyceraldehyde and L-glyceraldehyde, that are mirror images of each other and have opposite optical activities.
PLEASE ACTUALLY ANSWER THE WHOLE ASSIGNMENT FOR BRAINLIEST
The results of the lab activity showed that the larger the mass of the sun, the more likely at least one planet will fall into the habitable zone.
What effect does the mass of the Sun have on the orbits of Planets?The mass of the sun affects the orbits of planets in a solar system. When the mass of the sun is larger, the gravitational force between the sun and the planets is stronger, causing the planets to move at a slower pace around the sun.
Conversely, when the mass of the sun is smaller, the gravitational force is weaker, causing the planets to move at a faster pace.
Additionally, when Earth is closer to the sun, the gravitational force is stronger, causing its orbit to become faster, while a farther distance from the sun results in a slower orbit.
Learn more about the orbit of planets at: https://brainly.com/question/28430876
#SPJ1
Question
How many moles of Na₂S₂O3 are needed to dissolve 0.65 mol of AgBr in a solution volume of
1.0 L, if Ksp for AgBris 3.3 x 10-13 and K for the complex ion [Ag(S₂03)2] is 4.7 × 10¹3?
Remember to use correct significant figures in your answer (round your answer to the nearest
tenth). Do not include units in your response.
The precipitation of an ionic substance from solution occurs when the ionic product exceeds the value of its solubility product at that temperature. Here the moles of Na₂S₂O₃ needed is
The solubility product of a sparingly soluble salt is defined as the product of the molar concentrations of its ions in a saturated solution of it at a given temperature.
Here the concentration of Ag⁺ ions = √Ksp = √3.3 × 10⁻¹³ = 1.81 × 10⁻¹³.
Moles of Ag⁺ ions: (1.82 x 10⁻¹³ M) x 1.0 L = 1.82 x 10⁻¹³ mol Ag⁺
Use the stoichiometry of the reaction to find the moles of Na₂S₂O₃ needed: 1 mol Na₂S₂O₃ / 2 mol Ag⁺ = 0.5 mol Na₂S₂O₃/mol Ag⁺
Moles of Na₂S₂O₃ required: 0.5 mol Na₂S₂O₃/mol Ag⁺ x 1.82 x 10⁻¹³ mol Ag⁺ = 9.1 x 10⁻¹⁴ mol Na₂S₂O₃
To know more about solubility product, visit;
https://brainly.com/question/30940906
#SPJ1
According to the Law of Conservation of Mass, Matter cannot be created or destroyed.
Given that, if 15 grams of reactant went into the reaction, then how many grams of products are formed?
NH,NO,
N₂ +
H₂O
Answer:
Explanation:
According to the Law of Conservation of Mass, matter cannot be created or destroyed in a chemical reaction. Therefore, the mass of the reactants must be equal to the mass of the products.
If 15 grams of reactant went into the reaction, then the mass of the products formed must also be 15 grams. This assumes that the reaction is complete and no reactants are left unreacted.
It is important to note that this applies to closed systems where there is no loss or gain of mass. In real-world situations, some mass may be lost due to factors such as evaporation or incomplete reactions, which can affect the accuracy of the calculations.
To read more about law of conservation of mass,
https://brainly.com/question/29448733
The following first-order reaction occurs in CCL4(l) at 45°C: N2O5》N2O4+1÷2O2. The rate consast is k=6.2×10^-4 s^-1 an 80.0 g sample of N2O5 in CCL4 is allowed to decompose at 45°C
a) how long does it take for the quantity of N2O5 to be reduced yo 2.5 g ?
b) how many liters of O2 measured at 745 mmHg and 45°C, are produced up to this point ?
a) The amount of N₂O₅ is lowered to 2.5 g during the course of around 4.41 × 10⁴ seconds or 12.25 hours.
b) 9.71 L of O₂ are generated at 745 mmHg and 45 °C.
How to find quantity?a) To solve for the time required for the quantity of N₂O₅ to be reduced to 2.5 g, use the first-order integrated rate law:
ln[N₂O₅]t/[N₂O₅]0 = -kt
where [N₂O₅]t = concentration of N₂O₅ at time t, [N₂O₅]0 = initial concentration of N₂O₅, k = rate constant, and t = time.
Find the initial concentration of N₂O₅:
n(N₂O₅) = m/M = 80.0 g / 108.01 g/mol = 0.7413 mol
[N₂O₅]0 = n/V = 0.7413 mol / 0.153 L = 4.846 M
where M = molar mass of N₂O₅ and V = volume of the solution.
Substituting the given values into the equation:
ln([N₂O₅]t / 4.846 M) = -6.2×10⁻⁴ s⁻¹ × t
When the quantity of N₂O₅ is reduced to 2.5 g, the concentration is:
n(N₂O₅) = m/M = 2.5 g / 108.01 g/mol = 0.02314 mol
[N₂O₅]t = n/V = 0.02314 mol / 0.153 L = 0.151 M
Substituting this concentration into the equation and solving for t:
ln(0.151 M / 4.846 M) = -6.2×10⁻⁴ s⁻¹ × t
t = 4.41 × 10⁴ s
Therefore, it takes approximately 4.41 × 10⁴ seconds or 12.25 hours for the quantity of N₂O₅ to be reduced to 2.5 g.
b) The balanced equation for the reaction shows that 1 mole of N₂O₅ produces 1/2 mole of O₂:
N₂O₅ → N₂O₄ + 1/2 O2
Therefore, the number of moles of O₂ produced can be calculated using the stoichiometry:
n(O₂) = 1/2 × n(N₂O₅) = 1/2 × 0.7413 mol = 0.3707 mol
The ideal gas law can be used to calculate the volume of O₂ produced at 745 mmHg and 45°C:
PV = nRT
where P = pressure, V = volume, n = number of moles, R = gas constant, and T = temperature in Kelvin.
Convert the pressure to atm and the temperature to Kelvin:
P = 745 mmHg / 760 mmHg/atm = 0.980 atm
T = 45°C + 273.15 = 318.15 K
Substituting the values and solving for V:
V = nRT/P = (0.3707 mol) × (0.08206 L·atm/mol·K) × (318.15 K) / (0.980 atm) = 9.71 L
Therefore, the volume of O₂ produced at 745 mmHg and 45°C is 9.71 L.
Find out more on order reaction here: https://brainly.com/question/28179168
#SPJ1
What best describes the energy in light?
A. It increases as it is absorbed by an atom.
B. It increases as the light moves from violet toward red.
C. It is absorbed and emitted in discrete chunks.
D. It is absorbed when it comes into contact with an object.
C. It is absorbed and emitted in discrete chunks.
The energy in light is carried by particles called photons, which behave both like waves and like particles. According to the theory of quantum mechanics, photons can only be absorbed or emitted in discrete amounts of energy, known as quanta. This means that the energy in light is not continuous, but rather comes in specific packets or chunks. This phenomenon is known as quantization, and it has important implications for many areas of physics, including atomic and molecular physics, as well as the study of electromagnetic radiation.
Answer: C it is absorbed and emitted in descrete chunks.
Explanation:
photons of light are emitted or absorbed as electrons change energy levels
A student has a 2.97 L
bottle that contains a mixture of O2
, N2
, and CO2
with a total pressure of 5.68 bar
at 298 K
. She knows that the mixture contains 0.225 mol N2
and that the partial pressure of CO2
is 0.309 bar
. Calculate the partial pressure of O2
.
Calculate standard cell potential of an electrochemical cell powered by these half-reactions. (Write values to two decimal places. If a value is less than 1, be sure to write a 0 before the decimal.)
Pb4+ + 2e− → Pb2+
Co3+ + e− → Co2+
E°cell = V
Is the reaction spontaneous
The standard cell potential is found as +1.95 V and is a spontaneous reaction.
What is standard cell potential ?The standard cell potential (E°cell) of an electrochemical cell is given by the difference between the standard reduction potentials of the two half-cells involved.
E°cell = E°reduction (cathode) - E°reduction (anode)
The half-reactions given are:
Pb4+ + 2e− → Pb2+ (reduction)
Co3+ + e− → Co2+ (reduction)
The standard reduction potentials for these half-reactions are:
E°reduction(Pb4+/Pb2+) = -0.13 V
E°reduction(Co3+/Co2+) = +1.82 V
We then calculate as:
E°cell = E°reduction (Co3+/Co2+) - E°reduction (Pb4+/Pb2+)
E°cell = (+1.82 V) - (-0.13 V)
E°cell = +1.95 V
Learn more about standard cell potential at: https://brainly.com/question/29653954
#SPJ1
what is the ph of a .100M naclo solution
The pH of a 0.100M NaClO solution is 1.
How to calculate pH?pH, meaning power of hydrogen, is a measure of how acidic/basic a solution is. The range goes from 0 - 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base.
pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water. It can be estimated using the following formula;
pH = - log {H+}
Where;
H+ = hydrogen ion concentrationpH = - log {0.100}
pH = 1
Learn more about pH at; https://brainly.com/question/30934747
#SPJ1
