The actual rotor speed of the motor is 1140 rpm, which is the answer given in option C.
The speed of a synchronous motor is given by the formula:
Ns = 120f / p
where:
Ns = synchronous speed of the motor in revolutions per minute (rpm)
f = frequency of the power supply in hertz (Hz)
p = number of poles of the motor
For a 6-pole motor supplied at 60 Hz, the synchronous speed is:
Ns = 120 * 60 / 6 = 1200 rpm
However, due to various losses, the actual speed of a motor is always less than the synchronous speed. The difference between the synchronous speed and the actual speed is known as the slip. The slip is usually expressed as a percentage of the synchronous speed.
The formula for calculating the actual rotor speed of a motor is:
Nr = (1 - s) * Ns
where:
Nr = actual rotor speed of the motor in rpm
s = slip of the motor as a fraction of the synchronous speed
Ns = synchronous speed of the motor in rpm
In this case, the slip is given as 5% of the synchronous speed. Therefore:
s = 0.05
Ns = 1200 rpm
Substituting these values in the formula for actual rotor speed, we get:
Nr = (1 - 0.05) * 1200 = 1140 rpm
Hence, the actual rotor speed of the motor is 1140 rpm, which is the answer given in option C.
To learn more about speed visit:
https://brainly.com/question/7359669
#SPJ11
The _____ energy may be unchanged or decreased by the collision, depending on whether it is elastic or inelastic.
The total energy may be unchanged or decreased by the collision, depending on whether it is elastic or inelastic.
In an elastic collision, the total kinetic energy of the system is conserved, meaning that the total energy before and after the collision remains the same. In this case, the objects involved in the collision bounce off each other without any loss of energy. In contrast, in an inelastic collision, the total kinetic energy of the system is not conserved because some of the energy is lost in the form of heat, sound, or deformation. In this case, the objects involved in the collision stick together, and the final kinetic energy is lower than the initial kinetic energy.
Learn more about elastic collision here:
https://brainly.com/question/31356190
#SPJ11
a car motor releases 700 j of energy into the cooling system. it is a combustion motor which is 50% efficient. what amount of work could you expect from the motor?
To calculate the amount of work you can expect from a car motor that releases 700 J of energy into the cooling system and has a 50% efficiency, follow these steps:
1. Determine the total energy released by the motor: Since 700 J is released into the cooling system, this represents 50% of the total energy (because the motor is 50% efficient).
2. Calculate the total energy: To find the other 50% of the energy, which represents the work done, set up the equation:
700 J = 50% * Total Energy
3. Solve for Total Energy:
Total Energy = 700 J / 50% = 700 J / 0.5 = 1400 J
4. Calculate the work done: Since the motor is 50% efficient, the work done is also 50% of the total energy:
Work Done = 50% * Total Energy = 0.5 * 1400 J = 700 J
So, you could expect 700 J of work from the motor.
To know more about Total Energy:
https://brainly.com/question/14328309
#SPJ11
which one of the following types of waves is purely longitudinal? select answer from the options below light traveling through a vacuum. surface waves on a shallow pond. sound waves emitted from a speaker. waves on a plucked guitar string. radio waves traveling through air.
The type of wave that is purely longitudinal among the options provided is sound waves emitted from a speaker.
Longitudinal waves involve particles oscillating parallel to the direction of the wave's propagation, and this is the case for sound waves. Sound waves emitted from a speaker are an example of a purely longitudinal wave. In a longitudinal wave, the oscillations of the particles or medium are in the same direction as the direction of the wave propagation. Sound waves travel through a medium such as air, and as they move, they cause the air particles to vibrate in a parallel direction to the direction of the wave propagation. This results in the compressions and rarefactions of air particles, which we perceive as sound. Therefore, sound waves are classified as longitudinal waves. Other examples of longitudinal waves include seismic waves and ultrasonic waves.
Learn more about wave propagation :
https://brainly.com/question/31084304
#SPJ11
A merry-go-round with a radius of 1.5 m is spinning at 2.0 rad/s when a young girl pushes on it for 5.0 s applying an acceleration of 3.0 rad/s^2. What is the angular displacement of the merry-go-round during this time?
The angular displacement of the merry-go-round during the 5.0 seconds is 47.5 radians.
We can use the formula:
θ = ω_i t + 1/2 α [tex]t^2[/tex]
where:
θ = angular displacement
ω_i = initial angular velocity
t = time
α = angular acceleration
Given:
ω_i = 2.0 rad/s
α = [tex]3.0 rad/s^2[/tex]
t = 5.0 s
Substituting the values, we get:
θ = (2.0 rad/s)(5.0 s) + 1/2 (3.0 rad/[tex]s^2[/tex])(5.0[tex]s)^2[/tex]
θ = 10.0 rad + 37.5 rad
θ = 47.5 rad
Learn more about angular displacement
https://brainly.com/question/26483834
#SPJ4
Horse to pull a cart. According to Newton's third law, if he pulls on the wagon it pulls back on him with an equal force, then the net force is zero, and the wagon will stay put. Explain
When a horse pulls a cart, it applies a force on the wagon in the forward direction. According to Newton's third law, the wagon also applies an equal and opposite force on the horse in the backward direction. These two forces cancel each other out, resulting in a net force of zero.
In other words, the horse is pulling on the cart, and the cart is pulling back on the horse with an equal force. These forces cancel each other out, resulting in a net force of zero. When there is no net force acting on an object, the object remains at rest or moves at a constant speed in a straight line, according to Newton's first law of motion. Therefore, if the horse pulls on the cart but the cart is stationary or immovable, the net force on the cart is zero, and the cart will not move. However, if there is an additional force acting on it, such as friction from the ground the cart will start to move.
Learn more about Newton's third law here:
https://brainly.com/question/29768600
#SPJ11
A physical change occurs when
Select one:
a. glucose is converted into energy within your cells.
b. sand is filtered from salt water.
c. iron rusts.
d. propane is burned for heat.
e. sugar is heated into caramel.
The sugar molecules that results in the formation of new compounds, including caramel.
A physical change is a change that occurs without altering the chemical composition of a substance. In other words, the chemical identity of the substance remains the same before and after the change. Among the options provided, the correct answer is (b) sand is filtered from salt water. This is a physical change because the salt water and sand are physically separated, but their chemical composition remains unchanged.
Option (a) is incorrect because the process of converting glucose into energy involves chemical reactions that alter the chemical composition of glucose.
Option (c) is incorrect because the process of rusting involves a chemical reaction between iron, oxygen, and water that results in the formation of a new compound, iron oxide.
Option (d) is incorrect because the process of burning propane involves a chemical reaction between propane and oxygen that results in the formation of new compounds, carbon dioxide and water.
Option (e) is incorrect because the process of heating sugar into caramel involves a chemical reaction between the sugar molecules that results in the formation of new compounds, including caramel.
To learn more about composition visit:
https://brainly.com/question/13808296
#SPJ11
(C) C = εA/d; if A à 2, C à 2 and if d à 2, C ÷ 2 so the net effect is C is unchanged
A parallel-plate capacitor has a capacitance Co. A second parallel-plate capacitor has plates with twice the area and twice the separation. The capacitance of the second capacitor is most nearly
(A) ¼Co
(B) ½Co
(C) Co
(D) 2Co
(E) 4Co
The capacitance of the second capacitor is most nearly Co. The correct option is C.
The capacitance of a parallel-plate capacitor is given by:
C = εA/d
where ε is the permittivity of the material between the plates, A is the area of each plate, and d is the separation between the plates.
For the second parallel-plate capacitor, the area of each plate and the separation between the plates are both doubled. Therefore, we have:
C' = ε(2A)/(2d) = εA/d = C
So the capacitance of the second capacitor is unchanged and is equal to the capacitance of the first capacitor, which is Co.
On the other hand other options:
(A) ¼Co - This is incorrect because doubling both the area and separation of the plates would decrease the capacitance of the capacitor, not increase it. So, the capacitance cannot be 1/4 Co.
(B) ½Co - This is also incorrect for the same reason as option A. Doubling both the area and separation of the plates would decrease the capacitance of the capacitor, not increase it. So, the capacitance cannot be 1/2 Co.
(D) 2Co - This is incorrect because doubling both the area and separation of the plates would decrease the capacitance of the capacitor, not double it. So, the capacitance cannot be 2 Co.
(E) 4Co - This is also incorrect for the same reason as options D. Doubling both the area and separation of the plates would decrease the capacitance of the capacitor, not quadruple it. So, the capacitance cannot be 4 Co.
Therefore, the answer is (C) Co.
To learn about capacitance click:
brainly.com/question/28445252
#SPJ4
Many questions require you to combine the formula for the energy of a photon with the wave speed formula. Can you do this? What does it allow you to do?
Yes, it is possible to combine the formula for the energy of a photon with the wave speed formula. Doing so allows us to relate the energy of a photon to the wavelength and frequency of the corresponding electromagnetic wave.
The formula for the energy of a photon is given by E = hf, where E is the energy of the photon, h is Planck's constant, and f is the frequency of the electromagnetic wave. On the other hand, the wave speed formula relates the wavelength, frequency, and wave speed of the electromagnetic wave, and is given by v = λf, where v is the wave speed, λ is the wavelength, and f is the frequency.
By substituting λf for v in the energy formula, we get E = hf = hc/λ, where c is the speed of light. This equation is known as the wave-particle duality equation and allows us to determine the energy of a photon based on its wavelength or frequency, and vice versa. This relationship is important in understanding the behavior of electromagnetic waves and the particles they interact with, and has numerous applications in fields such as optics, spectroscopy, and quantum mechanics.
In summary, combining the formula for the energy of a photon with the wave speed formula allows us to relate the energy of a photon to its wavelength and frequency, and vice versa, providing important insights into the nature of electromagnetic radiation.
For more such questions on Photon.
https://brainly.com/question/31591565#
#SPJ11
Dmitri places one end of a copper rod in a heat reservoir and the other end in a heat sink. By what factor is the rate of heat flow changed when the temperature difference between the reservoir and sink is tripled?
The rate of heat flow is tripled when the temperature difference between the reservoir and sink is tripled. the factor by which the rate of heat flow changes is 3.
When the temperature difference is tripled, the rate of heat flow will also triple, assuming that the thermal conductivity of the copper rod remains constant.The rate of heat flow through a material is directly proportional to the temperature difference between the two ends of the material, as given by the following equation:
Q = kAΔT / L
where Q is the rate of heat flow, k is the thermal conductivity of the material, A is the cross-sectional area of the material, ΔT is the temperature difference between the two ends of the material, and L is the length of the material.If the temperature difference is tripled, then the new temperature difference is three times the original temperature difference, or:
ΔT_new = 3ΔT
Substituting this into the equation for Q, we get:
Q_new = kA(3ΔT) / L
Q_new = 3(kAΔT) / L
Q_new = 3Q
Learn more about heat flow here:
https://brainly.com/question/9307612
#SPJ11
What is the acceleration of a projectile when it reaches its highest point? What is its acceleration just before and just after reaching this point?(ch.4)
The acceleration of a projectile at its highest point is zero. The acceleration just before and just after reaching this point is due the vertical acceleration of the projectile due to gravity, which is approximately 9.81 m/s² downward. This value remains constant throughout the projectile's motion.
When a projectile reaches its highest point, its acceleration is zero. This is because at the highest point, the projectile has momentarily come to a stop and is about to start falling back down due to gravity. Just before reaching this point, the acceleration of the projectile is negative, as it is slowing down due to the opposing force of air resistance. Just after reaching the highest point, the acceleration of the projectile becomes positive, as it starts accelerating due to the force of gravity pulling it back down.
Learn more about projectile's motion here:
https://brainly.com/question/29545516
#SPJ11
A substance is heated from 15°C to 35°C. What would the same incremental change be when registered in kelvins?
To convert Celsius to Kelvin, you simply add 273.15. Therefore, 15°C is equivalent to 288.15 K and 35°C is equivalent to 308.15 K. The incremental change in Kelvins would be 20 K (308.15 K - 288.15 K = 20 K).
To determine the incremental change in kelvins when a substance is heated from 15°C to 35°C, follow these steps:
1. Find the temperature difference in Celsius: 35°C - 15°C = 20°C
2. Convert the temperature difference to Kelvin: Since 1°C = 1K, the incremental change in kelvins is the same as in Celsius. The incremental change when registered in kelvins would be 20K.
Kelvin 0 degrees is the temperature or kinetic energy of zero. Because these scales don't start at zero, changes in Celsius or Fahrenheit don't directly relate to kinetic energy or volume. The worth of one degree on the Kelvin scale is indistinguishable from the worth of one degree on the Celsius scale that is the temperature differential or change is indistinguishable on the two scales.
learn more about the conversion of Celsius to kelvin here
https://brainly.com/question/275961
#SPJ11
a beam of monochromatic light in material a enters material b , which has a higher index of refraction than material a . how do the speed, frequency, and wavelength of the light in material b compare to those in material a ?\
In denser medium, speed is slower but frequency remains same. So, as v = f lambda, so wavelength will also decrease. Hence, answer is: Option c.
What is speed?
The definition of speed. a direction or speed at which an object's location changes. The distance traveled relative to the time it took to travel that distance is how fast something is moving. As it just has a direction and no magnitude, speed is a scalar quantity.
What is frequency ?
The number of full wave cycles that pass a spot in a unit of time is described as frequency. The frequency in SI is measured in Hertz (Hz).
Therefore, In denser medium, speed is slower but frequency remains same. So, as v = f lambda, so wavelength will also decrease. Hence, answer is: Option c.
Learn more about speed from the given link.
https://brainly.com/question/3004254
#SPJ1
24.4 Suppose Young's experiment is carried out in air, and then, in a second experiment, the apparatus is immersed in water. In what way does the distance between bright fringes change? (a) They move farther apart. (b) They move closer together. (c) There is no change.
When the experiment is carried out in air and then immersed in water, the wavelength of light remains constant but the speed of light changes. This means that the distance between bright fringes will change. Specifically, the fringes will move closer together in water than they were in air. Therefore, the correct answer is (b) They move closer together.
When the apparatus is immersed in water, the wavelength of light decreases because the speed of light is slower in water than in air. This means that the distance between successive bright fringes decreases because the fringe spacing is proportional to the wavelength of light. Therefore, the bright fringes move closer together in the water medium as compared to their spacing in air.
To know more about Young's experiment, please click on:
https://brainly.com/question/31296110
#SPJ11
You weigh yourself on a scale inside an airplane that is flying with constant speed at an altitude of 20,000 feet. How does your measured weight in the airplane compare with your weight as measured on the surface of the earth?
When you weigh yourself on a scale inside an airplane that is flying with constant speed at an altitude of 20,000 feet, your measured weight will be slightly less than your weight as measured on the surface of the earth. This is because the airplane and everything inside it, including you and the scale, are in freefall towards the center of the earth due to gravity.
To compare your measured weight inside an airplane flying at a constant speed at an altitude of 20,000 feet with your weight measured on the surface of the Earth, consider the following:
1. Your weight depends on the gravitational force acting on you, which is determined by the Earth's mass and your distance from its center.
2. At an altitude of 20,000 feet (approximately 6,096 meters), you are slightly farther from the Earth's center compared to being on the surface.
3. Since the gravitational force decreases with distance, your measured weight inside the airplane at 20,000 feet would be slightly less than your weight measured on the surface of the Earth.
However, the difference in your measured weight at this altitude is relatively small and may not be easily noticeable on a standard scale.
To know more about gravitational force:
https://brainly.com/question/21500344
#SPJ11
The Millenium Falcon is chased by the Imperial Forces. The ship is moving at a speed of 0. 587 c. Han Solo is shooting at the imperial fighters with his newly installed proton cannon purchased at the MSU Surplus Store for $20. 00 plus 6. 00% tax. The cannon emits protons at a speed of 0. 831 c with respect to the ship. What is the velocity of the protons in the resting frame of the movie audience in terms of the speed of the light when the cannon is shot in the forward direction? (Use positive sign for the forward direction, and negative for the backward direction. )
Tries 0/20
What is the velocity of the protons in the resting frame when the cannon is shot in the backward direction? (Use positive sign for the forward direction, and negative for the backward direction. )
The Millenium Falcon is chased by the Imperial Forces. The ship is moving at a speed of 0. 587 c. Han Solo is shooting at the imperial fighters with his newly installed proton cannon purchased at the MSU Surplus Store for $20. 00 plus 6. 00% tax. The cannon emits protons at a speed of 0. 831 c with respect to the ship.
With the use of Relativistic velocity addition formula we will find the velocity of proton in the resting frame of the movie audience in terms of the speed of the light when the cannon is shot in the forward direction
Formula is given as
v = (u+v')/(1+u*v'/[tex]c^{2}[/tex])
Where
v = velocity of the protons in the resting frame of the movie audience
u = velocity of the Millennium Falcon with respect to the audience
v' = velocity of the protons with respect to the Millennium Falcon
c = speed of light
By putting all the values we get
v = (0.587c + 0.831c) / (1 + 0.587c*0.831c/[tex]c^{2}[/tex])
v = (1.418c) / (1 + 0.486)
v = 0.942c
Hence, the velocity of the protons in the resting frame of the movie audience is 0.942 times the speed of light.
To know more about Imperial Forces here
https://brainly.com/question/17219033
#SPJ4
how does an infrared camera work not what it is but how it works pls explain like you would to a kid
So, you know how we are able see things around us since light bounces off of them and goes into our eyes? Well, an infrared camera works a small bit in an unexpected way. Rather than seeing obvious light like our eyes do, it sees something called infrared radiation.
How does an infrared camera work?Everything around us gives off a small bit of this infrared radiation, indeed things that we can't see with our eyes. When an infrared camera looks at something, it's really detecting the warm that's given off by that question.
The camera encompasses a uncommon focal point that lets this infrared radiation in and it encompasses a sensor that can "see" it. At that point, it turns that heat vitality into an picture that we are able see on a screen.
Hence, in case you were to point an infrared camera at a individual or a pooch, you'd be able to see the warm coming off of them, and it would see like a colored picture where distinctive colors appear distinctive temperatures
Learn more about infrared from
https://brainly.com/question/20009656
#SPJ1
STT 13 Three identical books are stacked vertically. The normal force of book 1 on book 2 A equal to the weight of one bookB less than the weight of one bookC greater than the weight of one book
The weight of one book B must be less than the weight of one book (w), and the weight of book C must be greater than the weight of one book (w).
Let's assume that the weight of one book is w, then the weight of the three books stacked vertically is 3w.
According to Newton's Third Law, the force exerted by book1 on book2 is equal in magnitude and opposite in direction to the force exerted by book2 on book1.
So, we have:
Normal force of book1 on book2 = w + 2w = 3w
Since the books are identical. Therefore:
Normal force of book1 on book2 = w + 2w = 3w
This normal force is equal in magnitude to the weight of bookC.
To know more about Newton's Third Law, here
https://brainly.com/question/29768600
#SPJ4
T/F Assuming the same velocity at take-off, with the exception of a take-off angle of 45 degrees, there are two take-off angles that will give identical range.
The given statement is true. Assuming the same velocity at take-off, with the exception of a take-off angle of 45 degrees, there are two take-off angles that will give identical range.
These two take off angles are complementary angles, which means their sum equals 90 degrees. If one angle is θ, the other angle will be (90 - θ). This is because the range of a projectile is determined by both its initial velocity and launch angle, and the range equation has a sine function, which exhibits symmetry for complementary angles.Hence, there are two take-off angles that will give identical range.
To learn more about velocity https://brainly.com/question/80295?source=archive
#SPJ11
what spring constant should you specify? express your answer to two significant figures and include the appropriate units
The desired amount, and then use that force and the distance over which it acts to determine the spring constant.
The spring constant is a physical property of a spring and is defined as the force required to stretch or compress the spring by a certain amount, divided by that amount. The units of spring constant are typically Newtons per meter (N/m) in the SI system.
To determine the appropriate spring constant for a particular situation, you need to consider the characteristics of the spring and the forces acting on it. For example, if you are designing a spring to support a particular weight or provide a certain level of resistance, you would need to calculate the force required to compress or stretch the spring by the desired amount, and then use that force and the distance over which it acts to determine the spring constant.
To learn more about characteristics visit:
https://brainly.com/question/920068
#SPJ11
Certain sunglasses use a polarizing material to reduce the intensity of light reflected from shiny surfaces, such as water or the hood of a car. What orientation of the transmission axis should the material have to be most effective
Certain sunglasses use a polarizing material to reduce the intensity of light reflected from shiny surfaces, such as water or the hood of a car. The optimal orientation of the transmission axis in this material should be vertical.
The reflected light is predominantly horizontally polarized due to the angle of incidence on the shiny surfaces. When the transmission axis of the polarizing material in the sunglasses is vertically oriented, it blocks the horizontally polarized light from entering the wearer's eyes. This significantly reduces the glare caused by reflections, providing a more comfortable viewing experience and enhanced visibility.
In summary, to effectively reduce the intensity of light reflected from shiny surfaces, the polarizing material in sunglasses should have a vertical orientation of its transmission axis. This configuration selectively blocks horizontally polarized light, minimizing glare and improving overall visual comfort for the wearer.
learn more about transmission here:
https://brainly.com/question/10125102
#SPJ11
a bullet penetrates a wooden block and loses its velocity by a half. what is the kinetic energy of the bullet as it leaves the block as compared to when it entered the block?
The kinetic energy of the bullet as it leaves the block compared to when it entered is 25% (or 0.25 times).
To find the kinetic energy of the bullet as it leaves the block compared to when it entered, we can use the formula for kinetic energy:
KE = 0.5 * m * v², where m is the mass of the bullet and v is its velocity.
When the bullet enters the block, its velocity is v. After it penetrates the block, its velocity is reduced by half, meaning the new velocity is 0.5v.
Now, let's find the ratio of the kinetic energy after leaving the block to the kinetic energy when it entered:
KE_after/KE_before = (0.5 * m * ((0.5v)²) / (0.5 * m * v²)
Notice that the mass and the 0.5 constant factor will cancel out:
= ((0.5v)²) / (v²)
Now, we can square the term in the numerator:
= (0.25v²) / (v²)
Finally, the v² terms cancel out:
= 0.25
So, the kinetic energy of the bullet as it leaves the block is 25% (or 0.25 times) of the kinetic energy when it entered the block.
for more information on kinetic energy: https://brainly.com/question/26472013
#SPJ11
What is the recommended minimum stopping distance for a car travelling at 50 km/h on a dry road?a. 55 metres.b. 25 metres.c. 15 metres.d. 5 metres.
The answer choice that is closest to the recommended minimum stopping distance is (a) 55 metres. Therefore, the correct answer is (a) 55 metres.
The recommended minimum stopping distance for a car depends on various factors such as the speed of the car, the condition of the road (dry, wet, icy, etc.), the condition of the tires, and the reaction time of the driver.
As per general guidelines, the recommended minimum stopping distance for a car travelling at 50 km/h on a dry road is:
Stopping Distance = Thinking Distance + Braking Distance
Thinking Distance is the distance travelled by the car during the driver's reaction time. This is usually taken as 1 second, which corresponds to a distance of 14 metres at 50 km/h.
Braking Distance is the distance travelled by the car during the braking process. This depends on the speed of the car, the condition of the road, and the condition of the tires. As per general guidelines, the braking distance for a car travelling at 50 km/h on a dry road is approximately 25 metres.
Therefore, the recommended minimum stopping distance for a car travelling at 50 km/h on a dry road is:
Stopping Distance = Thinking Distance + Braking Distance
Stopping Distance = 14 metres + 25 metres
Stopping Distance = 39 metres
Based on this calculation, the answer choice that is closest to the recommended minimum stopping distance is (a) 55 metres. Therefore, the correct answer is (a) 55 metres.
Learn more about stopping distance
https://brainly.com/question/24254597
#SPJ4
heat in the amount of 100 kj is transferred directly from a hot reservoir at 1350 k (th) to a cold reservoir at 600 k. calculate the entropy change of the two reservoirs.
The entropy change of the two reservoirs when heat is transferred directly from the hot reservoir at 1350 K to the cold reservoir at 600 K is 92.60 J/K.
To calculate the entropy change of the two reservoirs when heat in the amount of 100 kJ is transferred directly from a hot reservoir at 1350 K (T_h) to a cold reservoir at 600 K (T_c), you can follow these steps:
1. Calculate the heat absorbed by the cold reservoir, which is the same as the heat lost by the hot reservoir: Q_c = -Q_h = 100 kJ.
2. Calculate the entropy change of the hot reservoir: ΔS_h = -Q_h / T_h = -100,000 J / 1350 K = -74.07 J/K.
3. Calculate the entropy change of the cold reservoir: ΔS_c = Q_c / T_c = 100,000 J / 600 K = 166.67 J/K.
4. Calculate the total entropy change of the two reservoirs: ΔS_total = ΔS_h + ΔS_c = -74.07 J/K + 166.67 J/K = 92.60 J/K.
The entropy change of the two reservoirs when heat is transferred directly from the hot reservoir at 1350 K to the cold reservoir at 600 K is 92.60 J/K.
Learn more about "entropy": https://brainly.com/question/6364271
#SPJ11
a mass m at the end of a spring vibrates with a frequency f. when an additional 2kg mass is added to m, the frequency is f/3. what is the value of m?
The value of m at the end of the spring is approximately 12.33 kg.
How to find the value of mass?The frequency of a spring-mass system is given by:
f = 1 / (2π) * √(k / m)
where f is the frequency, k is the spring constant, and m is the mass.
Let's call the mass at the end of the spring m1, and the additional mass added to m₁ m₂. We can write two equations for the system, one for each scenario:
f₁ = 1 / (2π) * √(k / m₁) -- Equation 1
f₂ = 1 / (2π) * √(k / (m₁ + m₂)) -- Equation 2
We know that the frequency of the system is reduced to f/3 when m2 is added, so we can write:
f₂ = f/3 -- Equation 3
Now we can substitute Equation 3 into Equation 2:
f/3 = 1 / (2π) * √(k / (m₁ + m₂))
Multiplying both sides by 3 and squaring both sides, we get:
9f² = (k / π²) * (m₁ + m₂)
Similarly, we can substitute Equation 1 into the same equation and get:
f² = (k / π²) * m₁
Dividing the two equations, we get:
9 = (m₁ + m₂) / m₁
Simplifying and rearranging, we get:
m₁ = 9m₂
Therefore, the mass at the end of the spring, m₁, is 9 times the additional mass added, m₂.
Substituting this relationship into Equation 3, we get:
f/3 = 1 / (2π) * √(k / (10m₂))
Solving for m₂:
m₂ = k / (4π²f²) * (10/9)²
We do not have a value for k, so we cannot solve for m₂ directly. However, we do know that m₁ = 9m₂. If we assume that k is constant between the two scenarios, then we can write:
f₁ / f₂ = √(m₁+ m₂) / √m₁
Substituting the relationship m₁ = 9m₂ and f₁ / f₂= 3, we get:
3 = √(10m₂) / 3√m₂
Squaring both sides and simplifying, we get:
m₂ = 27m₂ / 100
Solving for m₂, we get:
m₂ = 100 / 73 kg
Finally, we can calculate m₁:
m₁ = 9m₂ = 900 / 73 kg ≈ 12.33 kg
Therefore, the value of m at the end of the spring is approximately 12.33 kg.
Learn more about spring-mass
brainly.com/question/19425414
#SPJ11
At a particular instant, a proton moves Eastward in a uniform magnetic field that's that is directed straight downward. The magnetic force acts on it is?
A) directed upward
B) Northward
C) westward
D) to the south
E) zero
At a particular instant, a proton moving Eastward in a uniform magnetic field that's directed straight downward will experience a magnetic force directed upward. So, the correct answer is option A.
This is due to the fact that the proton is travelling eastward while the magnetic field lines are pointing downhill, creating a force that is perpendicular to both of them.
The equation F = qv x B, in which q is the particle's charge, v is its velocity, and B is the magnetic field, is used to compute this force, which is known as the Lorentz force.
The force will be directed along the vertical axis, which is upward, in this instance because the proton's charge is positive and its velocity is eastward. Hence, A) directed upward is the right response.
To learn more about proton visit:
https://brainly.com/question/14514636
#SPJ4
True or False :
Grating lobes are attributed only to array trdxs ?
False. Grating lobes can occur in any type of array, not just trdxs arrays.
Grating lobes are not attributed only to array trdxs. Grating lobes are a phenomenon that can occur in any array-based system, such as antennas or transducers when the spacing between elements in the array is large enough to cause constructive interference at undesired angles. This can result in unintended directional side lobes, which can affect the performance of the system. Grating lobes will occur whenever the size of individual elements in an array is equal to or greater than the wavelength, and there will be no grating lobes when the element size is smaller than half a wavelength.
Learn more about wavelength here: https://brainly.com/question/31143857
#SPJ11
A planet is moving in normal motion. Over the course of several nights, how will the planet appear to move relative to the background stars?
When a planet is moving in normal motion, it follows a regular path through the sky relative to the background stars. This motion is primarily due to the planet's orbit around the Sun and the Earth's orbit around the Sun as well.
Over the course of several nights, the planet will appear to move gradually from west to east in relation to the fixed background stars.
This motion is most easily observed by comparing the planet's position each night to a set of reference stars or other celestial objects, such as constellations. The planet's movement might not be very noticeable on a single night, but when observed over multiple nights, the change in position becomes more evident.
However, it is important to note that some planets occasionally exhibit retrograde motion, during which they appear to move backward (east to west) relative to the background stars. This phenomenon is caused by the relative motion between the Earth and the other planet, as well as their respective orbital speeds and positions. Retrograde motion is temporary, and after a period of time, the planet will resume its normal motion (west to east) relative to the background stars.
In conclusion, a planet in normal motion will typically appear to move from west to east relative to the background stars over the course of several nights. This motion is a result of the planet's orbit around the Sun, as well as the Earth's orbital movement. Observing this motion helps us understand the celestial mechanics and the relative positions of planets in our solar system.
For more such questions on Planet.
https://brainly.com/question/29585978#
#SPJ11
The fundamental frequency of a person's speech tends to be higher when they are excited or joyful.
T/F
Answer:
The fundamental frequency of a person's speech, also known as the pitch or F0, can vary depending on various factors such as age, gender, emotion, and cultural background. Studies have shown that the fundamental frequency tends to increase when a person is excited or joyful. This increase in pitch during intense emotions is thought to be due to changes in the tension of the vocal cords and increased respiratory activity.
Explanation:
How does the vector impulse due to cart 1 acting on cart 2 compare to the impulse of cart 2 acting on cart 1 in each collision? Are they the same in magnitude or different? Do they have the same sign or a different sign?
The lighter cart will experience greater impulse, and is opposite to that experienced by the heavier one.
If the cart 1 and cart 2 are having unequal masses, the cart with greater mass will exert more impulse on the lighter cart.
This is because, according to laws of motion, impulse is equal to the change in momentum of an object.
So, during the collision, the lighter cart will have a greater velocity than the heavier one. As a result, it will experience a greater impulse.
To learn more about impulse, click:
https://brainly.com/question/30466819
#SPJ4
Two identical arrows are fired at a target. If one arrow is going twice as fast, the faster arrow will penetrate the target
Entry field with correct answer
twice as much
half as much
the same distance
four times as much
When two identical arrows are fired at a target, the arrow that is moving twice as fast will have more kinetic energy than the slower one. The faster arrow will penetrate the target four times as much.
This means that it will be able to penetrate the target deeper than the slower arrow.
However, the amount of penetration will not be exactly half or four times as much, as there are several factors that come into play such as the weight and design of the arrows, the type of target, and the angle of impact.
In general, when a projectile is moving faster, it will have more kinetic energy and momentum, which will allow it to overcome the resistance of the target more easily.
However, the depth of penetration will also depend on the density and toughness of the target material, as well as the angle at which the arrow hits it.
Therefore, it is difficult to predict the exact amount of penetration without more specific information about the arrows and the target.
In summary, the arrow that is moving twice as fast will generally penetrate the target deeper than the slower arrow, but the actual amount of penetration will depend on various factors. The right answer will be four times as much.
For more such answers on Kinetic Energy
https://brainly.com/question/8101588
#SPJ11
