How many grams of O2 are needed to
combust 20.0 g of C3Hg?

Answer:

GIVEN IT'S A MULTI CHOICE QUESTION:

1. False

2. True

3. False

4. True

IF ITS NOT

2

Explanation:

We haven't made human clones because human cloning is extremely controversial and many people believe it is unethical.

Cloning is a genetic technique that can be used to reproduce genetically identical organisms in a laboratory.

In conclusion, we haven't made human clones because human cloning is extremely controversial and many people believe it is unethical.

Learn more in:

https://brainly.com/question/4736686

Answer:

[tex][PH_3]=0.30M[/tex] but see detailed explanation, please.

Explanation:

Hello there!

In this case, unfortunately, we are not given the rate constant but we can set up a reaction according to the information available on the internet:

[tex]4PH_3\rightarrow P_4+6H_2[/tex]

Whose rate constant is 0.0375/s. In such a way, it is possible infer that this is first-order reaction whose integrated rate law is:

[tex][PH_3]=[PH_3]_0exp(-kt)[/tex]

Thus, given the initial concentration, rate constant and elapsed time, the final concentration of PH3 would be:

[tex][PH_3]=(0.95M)exp(-30.50s*0.0375/s)\\\\[/tex]

[tex][PH_3]=0.30M[/tex]

However, it is important to keep in mind this result may vary according to your actual question.

Regards!

Answer:

I- It says horizon so.....what....wth ._.

Explanation:

Answer:

a) 2f

B)CIO3+na

c)2NO2(g)

d)HSO3(h)

Explanation:

The sign of entropy depends on the number of gaseous substance in the system. In the first reaction, the number of gaseous particles increase in the product hence, randomness increases and thereby entropy is positive.

Entropy is a thermodynamic quantity which measures the randomness of the system. As the disorder in the system increases, the entropy increases and the entropy change is said to be positive in sign.

In the first reaction, in the product side, 2 moles of gaseous substance is formed, which increases the randomness, hence, entropy change is positive.

In the second reaction, the more ordered solid state is getting into less ordered aqueous state. Hence, S is positive.

For the third reaction, the number of moles of gas decreases from 3 to 2. Hence S is negative. For the last reaction, there is no change in number of moles or state of substance and no change in S.

Find more on entropy:

https://brainly.com/question/13135498

#SPJ3

Answer:

0.0922 M

Explanation:

The problem first states that the titration is made using NaOH, and later asks about the addition of KOH. I'm going to assume NaOH was used throughout the whole problem. The result does not change if it was KOH instead.

The reaction that takes place is:

First we calculate how many HClO₄ moles are there in the sample, using the given molarity and volume:

Then we calculate how many NaOH moles were added:

Now we calculate how many HClO₄ remained after the reaction:

As HClO₄ is a strong acid, 4.24 mmol HClO₄ = 4.24 mmol H⁺

Finally we calculate the molarity of H⁺, using the calculated number of moles and final volume:

Answer:

A. 30cm³

Explanation:

Based on the chemical reaction:

CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂

1 mol of calcium carbonate reacts with 2 moles of HCl to produce 1 mol of CO₂

To solve this question we must convert the mass of each reactant to moles. With the moles we can find limiting reactant and the moles of CO₂ produced. Using PV = nRT we can find the volume of the gas:

Moles CaCO₃ -Molar mass: 100.09g/mol-

1.00g * (1mol / 100.09g) = 9.991x10⁻³ moles

Moles HCl:

50cm³ = 0.0500dm³ * (0.05 mol / dm³) = 2.5x10⁻³ moles

For a complete reaction of 2.5x10⁻³ moles HCl there are necessaries:

2.5x10⁻³ moles HCl * (1mol CaCO₃ / 2mol HCl) = 1.25x10⁻³ moles CaCO₃. As there are 9.991x10⁻³ moles, HCl is limiting reactant.

The moles produced of CO₂ are:

2.5x10⁻³ moles HCl * (1mol CO₂ / 2mol HCl) = 1.25x10⁻³ moles CO₂

Using PV = nRT

Where P is pressure = 1atm assuming STP

V volume in L

n moles = 1.25x10⁻³ moles CO₂

R gas constant = 0.082atmL/molK

T = 273.15K at STP

V = nRT / P

1.25x10⁻³ moles * 0.082atmL/molK*273.15K / 1atm = V

0.028L = V

28cm³ = V

As 28cm³ ≈ 30cm³

Right option is:

Answer:

chemical bonds

Explanation:

The atoms in chemical compounds are held together by attractive electrostatic interactions known as chemical bonds. Ionic compounds contain positively and negatively charged ions in a ratio that results in an overall charge of zero. The ions are held together in a regular spatial arrangement by electrostatic forces.

Answer: C diamond has a different crystal structure from graphite

Explanation:

The difference between the properties of  two forms of carbon is that

Diamond has a crystal structure  different from graphite.

Graphite and Diamond are known as allotropes of Carbon as they have the

same chemical properties but different crystal structure.

Diamonds form a 3 crystal lattice with no flexibility while Graphite are

bonded to sheets which makes them slide easily within one another and

gives it its soft texture.

Read more on https://brainly.com/question/23491824

Answer:

1.022ppm is the unknown concentration of the metal

Explanation:

Based on Lambert-Beer law, the increasing in signal of a detector is directly proportional to its concentration.

The unknown concentration (X) produces a signal of 0.255

99mL * X + 1mL * 100ppm / 100mL produces a signal of 0.502

0.99X + 1ppm produce 0.502, thus, X is:

0.255 * (0.99X + 1 / 0.502) =

X = 0.503X + 0.508

0.497X = 0.508

X =

1.022ppm is the unknown concentration of the metal

Answer:

In materials science, an intrinsic property is independent of how much of a material is present and is independent of the form of the material, e.g., one large piece or a collection of small particles. Intrinsic properties are dependent mainly on the fundamental chemical composition and structure of the material.

Explanation:

mark as brainliest

Answer: The pH of the substance is 8.25. The solution is basic.

Explanation:

pH or pOH is the measure of acidity or alkalinity of a solution.

pH is calculated by taking negative logarithm of hydronium ion concentration. The acids have pH ranging from 1 to 6.9 , salts have pH of 7 and bases have pH ranging from 7.1 to 14.

[tex]pH=-\log [H_3O^+][/tex]  

Putting in the values:

[tex]pH=-\log[5.6\times 10^{-9}][/tex]

[tex]pH=8.25[/tex]

Thus as pH is more than 7, the solution is basic.

The pH of the substance is 8.25. The solution is basic.

Answer:

1

Explanation:

........................

Answer:

The alkaline hydrolysis of ester is known as saponification. When ester is heated with aqueous NaOH, sodium salt of acid and alcohol are formed.

The process of saponification of an ester in an alkaline solution. Alcohol and sodium salt of acid are created when the bis heated with aqueous NaOH.

Esters are converted into soap and alcohol through the process of saponification, which uses an aqueous alkali. Fatty acids, which are long-chain carboxylic acids, are the building blocks of soaps. Sodium stearate is a regular soap ingredient.

From the Latin sapo, which signifies soap, the reaction is known as a saponification. The term is derived from the fact that fats were once hydrolyzed into esters to produce soap.

Particularly in the food industry, saponification is significant because it makes it simpler to estimate the amount of free fatty acids present in a specific food product. The quantity of free fatty acid can be determined by measuring how much alkali was needed to neutralize the fat or oil.

Thus,the alkaline hydrolysis reaction of esters is called as saponification.

To learn more about saponification, follow the link;

https://brainly.com/question/16495580

#SPJ2

Answer:

c

Explanation:

fossil records

Answer:

If capital R is round, than the RR and Rr will mean round, and the two rr's are wrinkled. that means the answer to both is 50%

Explanation:

hope that helps

Forget about mitigating climate change. Our planet has been warming nicely for the last three hundred years or more, and is a lot more productive and comfortable to live on than it was back then. All we have to do is not stuff it up.

HOPE IT HELPS U

FOLLOW MY ACCOUNT PLS PLS

D. Add an appropriate amount of sodium hydroxide.

Usually, chemical processes require an optimum pH. This is the pH at which the desired chemical conversion gives  the maximum yield.

As we can see, the pH of the system is much higher than the optimum pH. We can decrease the pH to the optimum pH of 5.0 by adding an appropriate amount of  a base such as NaOH.

Hence, the pH can be brought to 5.0 from 6.5 by adding an appropriate amount of NaOH.

https://brainly.com/question/15255706

Cr2Na2O7

Sodium Dichromate

In order to determine the objectives that you've accomplished, you should identify the steps required to test a hypothesis.

A scientific method refers to the various techniques and objectives that are adopted to observe, investigate, and study the natural world while giving explanations on the basis of the evidence, hypothesis, or factual information that are derived from a research work.

An effective and efficient way to accomplish your objectives during a research work include the following:

In conclusion, you should identify the steps required to test a hypothesis in order to determine the objectives that you've accomplished.

Read more on scientific method here: brainly.com/question/17216882

Answer:

When sodium hydroxide react with sulphuric acid they form Sodium sulphate and water. The reactants is base and an acid, which leads to neutralization process and yields a salt .

Answered by The One and only #Queen

Answer:

Hello There!!

Explanation:

The answer is=>a. Gibbs.

hope this helps,have a great day!!

~Pinky~

[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]

a. Gibbs

Answer:

Basically, fragrances reach other person through sense of smell. So, the strength of the fragrances depends a lot on its evaporation, which is strongly related to the boiling point. Esters with higher molecular weight do not have a strong fragrance because it has a higher boiling point.

Answer:

5.89 g × 10⁶ μg

Explanation:

Step 1: Convert 5.00 scruples to grains

We will use the conversion factor 1 scruple = 20 grains.

5.00 scruple × 20 grain/1 scruple = 100 grain

Step 2: Convert 100 grains to ounces

We will use the conversion factor 1 oz = 480 grains.

100 grain × 1 oz/480 grain = 0.208 oz

Step 3: Convert 0.208 oz to grams

We will use the conversion factor 1 oz = 28.34 g.

0.208 oz × 28.34 g/1 oz = 5.89 g

Step 4: Convert 5.89 g to micrograms

We will use the conversion factor 1 g = 10⁶ μg.

5.89 g × 10⁶ μg/1 g = 5.89 g × 10⁶ μg

The mass in micrograms of 5 scruples is 5.9×10⁶ μg

We'll begin by converting 5 scruples to grains.

1 scruple = 20 grains

Therefore,

5 scruples = 5 × 20

480 grains = 1 ounce

But

1 ounce = 28.34 g

Thus, we can say that

480 drains = 28.34 g

Therefore,

100 grains = (100 × 28.34) / 480

1 g = 1×10⁶ μg

Therefore,

5.9 g = 5.9 × 1×10⁶ μg

Therefore, 5 scruples is equivalent to 5.9×10⁶ μg

Learn more: https://brainly.com/question/25008909

Answer:

2c11h21

Explanation:

Answer:

I think its 3.6 to the right

Explanation:

I apologize if im wrong