Answer: I think 82.46
Explanation: The atomic number for strontium, or Sr on the periodic table, is 38. With knowing the atomic number, I multiplied that by the number of moles given.
38 × 2.17 = 82.46
I hope this helps!!
The number of atoms present in 2.17 moles of strontium are [tex]1.306774 \times 10^{24}[/tex].
An atom is the smallest indivisible unit of a chemical element that retains the chemical properties of that element. It is the basic building block of matter.
To determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately [tex]6.022 \times 10 ^{24}[/tex] atoms per mole.
In this case, we have 2.17 moles of strontium. To find the number of atoms, we multiply the number of moles by Avogadro's number:
Number of atoms = [tex]2.17 moles\times6.022\times 10^{23}[/tex][tex]atoms/mole[/tex]
On calculating this expression:
Number of atoms =[tex]1.306774 \times 10^{24}[/tex]
Therefore, there are approximately [tex]1.306774 \times 10^{24}[/tex] atoms in 2.17 moles of strontium.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ2
TUTOR Determining Molecular Weight
What is the molecular weight of Cr3(ASO4)2? amu
The molecular weight of Cr3(AsO4)2 is 433.827.
Is molecular weight the same As molar mass?Furthermore, the primary distinction between each is that molar mass gives the mass of a mole of a selected substance. While molecular weight is the mass of a molecule of a particular substance. At an equal time as the definition and devices are splendid for molar mass and molecular weight, the value is the same.
The sum of the atomic hundreds of all atoms in a molecule is based totally on a scale wherein the atomic loads of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively.
Learn more about molecular weight here https://brainly.com/question/26388921
#SPJ10
just need help with one question pls
Answer:
A large absorption at 2950 cm⁻¹ indicates that there is likely an sp³C-H functional group somewhere in the molecule. The "sp³" designation means that this is a single bond because these atoms have 4 orbitals available (s + p + p + p) for hybridizing, meaning only single bonds are possible.
What is the ph of a peach with a [ –oh] = 3.2 × 10 –11 m?
The average atomic mass of carbon is 12.01 amu. Based on the atomic
masses of the two isotopes of carbon, how do the relative abundances of the
isotopes compare?
Isotope
Atomic mass (amu)
C-12
12.000
C-13
13.003
OA. There is a slightly larger percentage of C-12 than C-13.
OB. There is a very large percentage of C-12.
OC. There is a very small percentage of C-12.
OD. They are about the same.
Answer: There is a very large percentage of C-12.
Explanation:
The atomic mass is must closer to that of C-12 than of C-13, meaning that there is a much larger percentage of C-12.
What is the best definition of the enthalpy of vaporization, ^ Hvap?
A. The change in the disorder of a system when a liquid changes to a
gas
B. The change in the disorder of a system when a molecule forms
from its atoms
C. The energy needed to raise the temperature of a liquid to the
boiling point
D. The energy needed to change a liquid into a gas
Answer: D. The energy needed to change a liquid into a gas
a prescriber has ordered childrens motrin 400 mg po q6h for a child who weighs 60 kg. how many mg/kg is the child receiving
Answer:
6.67 mg/kg per dose ( 26.67 mg/kg per day)
Explanation:
400 mg / 60 kg = 6 2/3 mg/kg per dose
per DAY is four times this number
nts
S + 6 HNO3 → H₂SO4 + 6 NO₂ + 2 H₂O
In the above equation, how many grams of water can be made when 19.7 moles of HNO3 are
consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report
the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark
your answer incorrect.:
Molar
Mass
Element
Hydrogen 1
Nitrogen 14
Sulfur 32
Oxygen 16
Answer:
118.2 g H₂O
Explanation:
To find the mass of water, you need to (1) convert moles HNO₃ to moles H₂O (via mole-to-mole ratio from reaction coefficients) and then (2) convert moles H₂O to grams H₂O (via molar mass).
The molar mass of water can be found by combining the element's molar masses times their quantities. The ratios/conversions should be arranged in a way that allows for the cancellation of units (desired unit should be in the numerator).
Molar Mass (H₂O): 2(1 g/mol) + 16 g/mol
Molar Mass (H₂O): 18 g/mol
S + 6 HNO₃ ---> H₂SO₄ + 6 NO₂ + 2 H₂O
^ ^
19.7 moles HNO₃ 2 moles H₂O 18 g
-------------------------- x ----------------------- x --------------------- = 118.2 g H₂O
6 moles HNO₃ 1 mole H₂O
Help please! Thank you!
Answer:
KCl
Explanation:
Ionic compounds are formed between atoms with very different electronegativity (EN) values. The elements with the highest EN values are on the top-right of the periodic table.
Ionic compounds are also generally between a metal and nonmetal. Nonmetals are located in the p-block (the right) of the periodic table and metals are pretty much everywhere else.
That being said, water (H₂O), CO, and CO₂ contain elements that have too similar of EN values to ionically bond.
However, the elements in KCl have different enough EN values to undergo ionic bonding by donating/receiving electrons from each other.
A. What is the theoretical yield in grams for this reaction under the given conditions?
B. What is the percent yield for this reaction under the given conditions?
The theoretical yield of NH3 is 10.03 g while the percentage yield of NH3 is 22%.
What is the theoretical yield?The theoretical yield is defined as the yield of the product as obtained from the stoichiometry of the reaction.
Given that the reaction equation is; N2 + 3H2 ------> 2NH3
Number of moles of N2 = 9.80 g/28 g/mol = 0.35 moles
Number of moles of H2 = 1.77 g/ 2 g/mol = 0.885 moles
If 1 mole of N2 reacts with 3 moles of H2
0.35 moles reacts with 0.35 moles * 3 moles / 1 mole
= 1.75 moles
Hydrogen is the limiting reactant
Thus;
3 moles of H2 yields 2 moles of NH3
0.885 moles yields 0.885 moles * 2 moles/3 moles
= 0.59 moles
Theoretical yield of NH3 = 0.59 moles * 17 g/mol = 10.03 g
Percent yield = 2.21/10.03 * 100/1
= 22%
Learn more about theoretical yield:https://brainly.com/question/14966377?
#SPJ1
How many moles of N are in
0.227g N₂0?
Answer:
0.217 ×2. =9.86×10moles
44
1. A balloon contains 100g of oxygen gas (O₂) when the volume is 110 dm³. Find the volume of the balloon when the mass of oxygen gas is decreased to 50g. [take O=16] 1. A balloon contains 100g of oxygen gas ( O₂ ) when the volume is 110 dm³ . Find the volume of the balloon when the mass of oxygen gas is decreased to 50g . [ take O = 16 ]
The volume of the balloon when the mass of oxygen gas is decreased to 50g is 50L.
We will use the ideal gas equation-
PV=nRT
P=Pressure
V=volume
n=no. of moles
T=temperature
In this question temperature and pressure will remains constant then the above equation can be rewritten as-
[tex]V_{1} /n_{1} =V_{2} /n2[/tex]
where V1= initial volume of the balloon
V2= volume of the balloon when the mass of oxygen gas is decreased to 50g
now, substitute the values in the above equation-
V1=100dm3=100Ln1=100/32=3.12n2=50/32=1.56100/3.12=V2/1.56
V2=50 Lhence, the volume of the balloon when the mass of oxygen gas is decreased to 50g is 50L.
learn more about the ideal gas equation here:
https://brainly.com/question/1056445
#SPJ10
Hazmat Poison gas is in what class?
HAZMAT Class 6 Toxic and infectious substances.
Answer:
CLASS 2 Gases
Explanation:
Hope this helps
How many atom are present in a piece of iron that has a mass of 65.
0g
Iron has an atomic mass of 55.845 g/mol, so the amount of iron in 65.0 g is 65.0/55.845 = mol.
Avogadro's law states that in every mole of a substance, there are [tex]6.022 \times 10^{23}[/tex] particles per mole, so in this case, that means there are [tex](1.16393589)(6.022 \times 10^{23})=\boxed{7.01 \times 10^{23}} \text{ atoms (to 3 sf)}}[/tex]
Determine the trends in radii for the following ions and atoms: Mg2+, F- , Ne, and Na+ .explain your choice
The trend for the radii is Mg²⁺ < Na+ < Ne <F⁻
What does Ionic size varies with number of protons ?With the increase in number of protons in the nucleus the electrons are more attracted towards nucleus and so the ionic radius decreases.
Ionic size increases with the addition of electrons and ionic size decreases with the loss of electrons.
Higher is the atomic number, higher will be the effective nuclear charge, lower will be the size.
F⁻
no. of proton=9
no of electron = 10
Na+
no. of proton=11
no of electron=10
Mg²⁺
no. of proton=12
no of electron=10
Ne
no. of proton=10
no of electron=10
Mg²⁺ < Na+ < Ne <F⁻
Therefore the trend for the radii is Mg²⁺ < Na+ < Ne <F⁻
To know more about effect of protons on Ionic Radius
https://brainly.com/question/9444116
#SPJ1
Air pressure is measured in pascals. For a professional American football game, the ball should be inflated to about 90,000 pascals. Scientists studied the effects of air temperature on the pressure inside American footballs by taking these steps:
1. Prepare 100 footballs.
2. Measure each football's air pressure.
3. Divide footballs into 10 groups.
4. Place the groups in different lockers cooled to different air temperatures.
5. After 12 hours, remove the footballs from lockers.
6. Measure each football’s pressure again.
7. Compare the new pressures to the starting pressures.
What two terms best describe the variable "air pressure inside the football" in this experiment?
independent, qualitative
independent, quantitative
dependent, qualitative
dependent, quantitative
The variable "air pressure inside the football" in this experiment is quantitative and dependent variable. Hence, option D is correct.
What is the dependent variable?The dependent variable is the variable that is being measured or tested in an experiment.
In the experiment, the scientist filled the footballs with fix quantity of pressure which was then kept for 12 hours. After 12 hours the pressure inside the footballs was again measured. Pressure here is a quantitative variable.
Since the air temperature is an independent variable. The pressure being the dependent variable depends upon the temperature of the air.
Independent variable; The variable which does not depends upon any other variable.
Dependent variable; The variable which depends upon the independent variable or varies with the change independent variable.
Qualitative variables are variables which cannot be expressed in form of numbers. They generally convey the characteristic, category, quality or type.
Whereas Quantitative variables are the variables which can be expressed in the form of numbers. These are the variables which exist along the continuous sequence.
Learn more about dependent variables here:
https://brainly.com/question/1479694
#SPJ1
Calculate the standard enthalpy change associated with this reaction at 25 °C using the
following enthalpies of formation:
CH4 ∆Hf = -62.7 kJ·mol–1, CO2 ∆Hf = -393.5 kJ·mol–1, H2O ∆Hf = -285.8 kJ·mol–1.
The standard enthalpy change associated with the given reaction at 25 °C using the following enthalpies of formation will be − 902.4 kJ
What is Standard Enhalpy change ?The standard enthalpy change of formation of a compound is the enthalpy change which occurs when one mole of the compound is formed from its elements under standard conditions, and with everything in its standard state.
According to the balanced chemical equation ;
CH₄(g) + 2O₂(g) ⟶ CO₂(g) + 2H₂O(l)
Now,
ΔH⁰ = ΔH⁰f(products) − ΔH⁰f(reactants)
= [ΔH⁰(CO₂) +ΔH⁰(H₂O)] − [ΔH⁰(CH₄) + 2ΔH⁰(O₂)]
= [−393.5 + 2 x (−285.8)] − [−62.7 + 2 x 0]
= − 902.4 kJ
Hence, The standard enthalpy change associated with the given reaction at 25 °C using the following enthalpies of formation will be − 902.4 kJ
Learn more about enthalpy here ;
https://brainly.com/question/16720480
#SPJ1
How many taste buds are present on the tongue? Name them.
there are five Taste bud present tongue they are -
SWEET SALT SOUR BITTER UMAMI ______________________out of the four type of papillie present on tongue the fungiform circumvallate and folite papillie contain numerous small taste but few such type of Taste but also occur in the mucous membranes of soft palate tonsils and epiglottis all of these days but received taste is normally
each Taste bud is an oval structures formed due to modification of epithelial cells which are situated erect and vertically on the surface long sensory cells and supporting cells are found in this bird is sensory cell is spindle shaped in which a sensory here is found at its free in the century fibre of the facial and vagus cranial nerves are wrapped around the basal and of the gustatory cells each test but open on the epithelial surface through minute taste pore
____________________Choose the correct option.
1. A chain of small chemical units combined to form a large single unit is called ______
a) Polymer
b) Poly
c) Polythene
d) None of the above
2. Polythene and PVC are examples of
a) Bio degradable substance
b) Thermosetting plastics
c) Thermoplastics
d) Rayon
3. Plastics which when moulded once, cannot be softened by heating. Such plastics are called __ a) Polythene
b) Thermoplastics
c) Polyster
d) Thermosetting plastics
4. Polycot is made by mixing two types of fibres namely
a) Silk + Cotton
b) Polythene + cotton
c) Silk + Polyester
d) Polyester + Cotton
5. The 4 R Principle is
a) Reduce, Reuse, Recycle, Recover
b) Remember, reduce, Recycle, Rejoice
c) Repeat, Rejoice, recycle, reduce
d) None of the above
6. _____________ is an example of natural polymer
a) Rayon
b) Cellulose
c) Nylon
d) All of the above
7. Which of the following is Non-biodegradable ?
a) Woolen clothes
b) Plastic bag,
c) Cotton cloth
d) Wood
8. Bakelite and Melamine are examples of
a) Thermosetting plastics
b) Silk
c) Nylon
d) Rayon
9. Fire proof plastic uniform worn by fire fighters has a coating of _____ to make it fire resistant. a) Nylon
b) Rayon
c) Melamine plastic
d) silk
The coating on modern non- stick cookware and electric iron is of
a) Terrycot
b) Rayon
c) Polyester
d) Teflon
What does Gay Lussacs law state and explain
Answer:
'Gay-Lussac's law is a gas law that states the pressure of a gas varies directly with temperature when mass and volume are kept constant. As the temperature increases, the pressure will also increase.'
Answer:
Gay Lussac’s law says that the pressure created by a gas is proportional to the temperature of the gas when the mass is constant or the same
so, when pressure increases so does the temperature and when pressure decreases so does the temperature
pls this this solutions
i hope someone can help me here please don't answer nonsense!
Answer:
4560 torr
Explanation:
PV = K
4 x 1.5 = k
k = 6
V = k / p
V = 6 / 1
V = 6
atm to torr = 1 to 760
760 x 6 = 4560
A piece of metal with a mass of 23.2 g at 120.1oC is placed in a styrofoam cup containing 35.0 g of water at 22.2oC. Once the system has reached equilibrium, the final temperature of the water is 34.0oC. What is the specific heat of the metal to four significant digits? The specific heat of water is 4.18 J/g-oC.
Answer:
0.8797 J/g oC
Explanation:
use mcAT=mcaT
number 3 pls and thank u
The statement which is not true is as follows:
The repulsive force between electrons on different atoms does not matter at all.Thus, the correct option is C.
What is Equilibrium?An equilibrium may be defined as the condition in which both the reactants and products are present in concentrations that have no additional propensity to alter with time so that there is no noticeable transformation in the possessions of the system.
The causation of repulsive force was thought to be made by the overlap of atomic orbitals and in between the electrons of diverse atoms, it matters a lot.
The equilibrium distance between nuclei of two covalently bonded atoms is called the bond length of that atom. It is the atomic separation at equilibrium.
Equilibrium occurs when the attractive and repulsive forces neglected the effect of each other in a specific state.
Therefore, it is well described above.
To learn more about Covalent bonds, refer to the link:
https://brainly.com/question/11651796
#SPJ1
Question 21
A sample of rainwater has a pH of 3.5. What ion is sure to be present in relatively
large concentration in this rain sample?
H3O+
SO4²-
OH
HSO4
A sample of rainwater with a pH of 3.5 is sure to contain a large concentration of [tex]H_3O^+[/tex]
pH scaleA pH value of 7 downward is said to be acidic. Upward of 7 is said to be basic. A pH of 7 on the dot is said to be neutral.
An acid is defined as a substance that produces [tex]H_3O^+[/tex] as its only positively charged ion in solution.
Thus, rainwater with a pH of 3.5 is acidic and will contain a high concentration of [tex]H_3O^+[/tex].
More on pH can be found here: https://brainly.com/question/15289741
#SPJ1
Identify the products formed in this Brønsted-Lowry reaction.
HCO−3+BrO−↽−−⇀acid+base
Answer:
HCO3- + BrO- → HBrO + CO32-
Explanation:
I think this is the answer hope it helps
For the following reaction, 22.0 grams of nitrogen monoxide are allowed to react with 5.80 grams of hydrogen gas . nitrogen monoxide ( g ) + hydrogen ( g ) nitrogen ( g ) + water ( l ) What is the maximum amount of nitrogen gas that can be formed? grams What is the FORMULA for the limiting reagent? What amount of the excess reagent remains after the reaction is complete? grams
NO is the limiting reagent and 4.34 g is the amount of the excess reagent that remains after the reaction is complete
What is a limiting reagent?The reactant that is entirely used up in a reaction is called as limiting reagent.
The reaction:
[tex]2NO(g) +2H_2(g)[/tex] → [tex]N_2 +2H_2O[/tex]
Moles of nitrogen monoxide
Molecular weight: [tex]M_(_N_O_)[/tex]=30g/mol
[tex]n_(_N_O_) =\frac{mass}{molar \;mass}[/tex]
[tex]n_(_N_O_) =\frac{22.0}{30g/mol}[/tex]
[tex]n_(_N_O_) = 0.73 mol[/tex]
Moles of hydrogen
Molecular weight: [tex]M_(_H_2_)[/tex]=30g/mol
[tex]n_(_H_2_) =\frac{mass}{molar \;mass}[/tex]
[tex]n_(_H_2_) =\frac{5.80g}{2g/mol}[/tex]
[tex]n_(_H_2_) = 2.9 mol[/tex]
Hydrogen gas is in excess.
NO is the limiting reagent.
The amount of the excess reagent remains after the reaction is complete.
[tex]n_(_N_2_) =[/tex] (2.9 mol- 0.73 mol NO x [tex]\frac{1 \;mol \;of \;H_2}{2 \;mole \;of \;NO}[/tex]) x [tex]\frac{2g \;of \;H_2}{mole \;of \;H_2}[/tex]
[tex]n_(_N_2_) =[/tex]4.34 g
Learn more about limiting reagents here:
https://brainly.com/question/26905271
#SPJ1
When developing an experimental design, which action would improve the
quality of the results?
O A. Have a different researcher make the measurements.
OB. Ensure that it answers a question about cause and effect.
C. Include as many responding variables as possible.
OD. Keep the sample size of test subjects to a minimum.
SUBMIT
Answer:
A
Explanation:
I'm right I took the test
What is the percent yield for the reaction below when
705.0 g SO2 and 80.0 g 0₂ produce 586.0 g SO3?
2SO2(g) + O₂(g) → 2SO3(g)
The percent yield for the chemical reaction producing sulfur trioxide is 66.51%.
What is percent yield?Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.
In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.
For the given reaction, theoretical yield is calculated as,
128.132 g of sulfur dioxide gives 160.12 g of sulfur trioxide
∴705 g of sulfur dioxide gives 705×160.12/128.132= 881 g
Percent yield is, 586/881×100=66.51%
Therefore, the percent yield for the chemical reaction is 66.51%.
Learn more about percent yield,here:
https://brainly.com/question/12704041
#SPJ1
Calculate the moles for C. and D. in the attached picture:
The moles of nitrogen (iv) oxide produced in C and D are 0.284 moles and 68.32 moles respectively.
What is the mole ratio of the reaction?The mole ratio of the given reaction shows that 2 moles of dinitrogen (v) oxide produces 4 moles of nitrogen (iv) oxide when it decomposes.
B of dinitrogen (v) oxide in 15.4 g is calculated below:
Molar mass of dinitrogen (v) oxide = 108 g/mol
Moles of dinitrogen (v) oxide = 15.4/108 = 0.14 moles
Moles of nitrogen (iv) oxide produced = 0.142 * 2 = 0.284 moles
Moles of dinitrogen (v) oxide in 3.69 kg is calculated below:
Molar mass of dinitrogen (v) oxide = 108 g/mol
Mass = 3.69 kg = 3690 g
Moles of dinitrogen (v) oxide = 3690/108 = 34.16 moles
Moles of nitrogen (iv) oxide produced = 34.16 * 2 = 68.32 moles
Therefore, the moles of nitrogen (iv) oxide produced in C and D are 0.284 moles and 68.32 moles respectively.
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
A group of students is comparing the graphs of strong acid-strong base and weak acid-strong base titration curves, where the base is the titrant. Which statement inaccurately describes a difference between the two curves?
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid- strong base.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve. Hence, option A is correct.
What is a weak acid?Weak acids are acids that don't completely dissociate in solution.
A weak acid is an acetic acid. It has a of 1.8⋅[tex]10^{-5}[/tex]. Calculate how much it will dissociate in water. Since acetic acid is a weak acid so large part will not dissociate completely.
[tex]k_a=\frac{[CH_3COO^-]H^+]}{[CH_3COOH]}[/tex]
B is not true, it shows the titration curve for weak/strong acid titrated with a strong base. When choosing an indicator for colourimetric titration select one so that the pH jump at the equivalence point contains the interval p±1. Phenolphthalein has a p≈9, so to decide if it is a suitable indicator check if the pH jumps from 8 to 10 at the equivalence point.
C is not true either because of the very slow reaction.
Learn more about weak acid here:
https://brainly.com/question/12811944
#SPJ1
