Answer:
work idk
Explanation:
if you pay attention and make notes of important things in your unit then it'll help get good grade
ask your teacher for extra credit or if there's anything you can do to raise your grade
Which of these would not improve accuracy?
A)Taking a bigger sample size
B)Using a bigger range of the independent variable
C)Using measuring instruments that can read to a greater number of decimal places
D)Remove anomalies
a linear function has the same y-intercept as x + 4y equals 16 and it's graph contains the point (4,5). Find the slope of the linear function.
Answer: [tex]\bold{\text{Slope (m)}=\dfrac{1}{4}}[/tex]
Explanation:
A linear equation is of the form: y = mx + b where
m is the slopeb is the y-intercept (where it crosses the y-axis)x + 4y = 16
4y = -x + 16
[tex]y = -\dfrac{1}{4}x+\dfrac{16}{4}[/tex]
[tex]y=-\dfrac{1}{4}x+4[/tex]
The y-intercept (b) = 4
Next, find the slope given point (4, 5) and b = 4
[tex]y=mx+b\\\\5=m(4)+4\\\\1=4m\\\\\dfrac{1}{4}=m\\\\\\\\\large\boxed{Slope (m)=\dfrac{1}{4}}[/tex]
A) Is it possible for an object that, object with zero acceleration have velocity? If yes give an example if not give its proof.
Answer:
Yes, in case of uniform velocity
Explanation:
This is the case of uniform velocity. If a body covers equal displacement in equal intervals of time, then the velocity of a body is said to be ‘Uniform Velocity’. It meas that the velocity of a body remains constant during the motion and it does not change.
Since, acceleration is defined as the rate of change of velocity.
Therefore, if there is no change in velocity or in other words the change in velocity is zero, then the acceleration is also zero.
a = ΔV/t = 0/t
a = 0 m/s²
So, the acceleration of the body is 0 m/s², but it has a uniform velocity
Hence, it is possible for an object that, object with zero acceleration have velocity, which is the case case of uniform velocity.
What are some advantages
and disadvantages to using
superconductors as electric
transmission lines
Answer:
Insulators show very high resistance to electricity. Conductors like copper show some resistance. Another class of materials show no resistance at all when cooled to very low temperatures, cooler than the coolest deep freezer. Called superconductors, they were discovered in 1911.
Explanation: i looked it up
Is there a link between number of bulbs and current drawn from the power pack?
Answer:
Yes, there a link between number of bulbs and current drawn from the power pack.
Explanation:
In an Electrical circuit, we have resistors present in that circuit. These resistors can be connected in two ways.
a) Series connection
b) Parallel connection
There is a link or a relationship between number of bulbs and the current drawn from the power pack. This is because the number of bulbs is equivalent to or equal to the number of resistors.
Hence,
a) In a series connection, the link or relationship between the number of bulbs(resistors) is as the number of light bulbs increases, the current in the power pack (circuit) decreases.
b) In a parallel connection, the link or relationship between the number of bulbs(resistors) is as the number of light bulbs increases, the current in the power pack (circuit) increases.
An escalator is used to move 25 passengers every minute from the first floor of a department store to the second. The second floor is located 5.30 meters above the first floor. The average passenger's mass is 60 kg. Determine the power requirement of the escalator in order to move this number of passengers in this amount of time.
Please help me quickly!
Answer:
1298.5watt
Explanation:
Power is defined as the rate at which work is done
Expressed mathematically as;
P = F × d/ t; F = force or weight of object ;d is height or distance sustain and t is time covered
Hence for 1 person the power consumption is ;
Note weight =mass× acceleration of free fall due to gravity,g
g is known as 9.8m/S2
Time taken is 1min which is 60 sec
60 ×9.8 × 5.3/60 = 51.94 watt
Hence for 25 persons we have
25 × 51.94 =1298.5watt
1.3kilo watt( kilo is 1000)
The work done by the escalator is 3,080.4 joules and the power requirement of the escalator to move 25 passengers every minute is approximately 51.34 watts.
The Work Done is calculated as:
Force (F) = 60 × 9.8
Distance (d) = 5.30 meters
Work (W) = F × d
Work (W) = (60 × 9.8) × 5.30
Work (W) = 3,080.4 joules
The Power is calculated as:
Time (t) = 1 minute
Power (P) = Work / Tim (t)
Power (P) = 3,080.4 / 60
Power (P) = 51.34 watts
Therefore, the power requirement of the escalator to move 25 passengers every minute is approximately 51.34 watts.
To know more about the work done and power:
https://brainly.com/question/29369495
#SPJ4
If there are a boys pulling a rubber
with the same amount of force what will happen?
Answer:
The rubber will expand to its maximum and then tear in the middle.
Explanation:
Answer:
Hey!
Well if they continue to pull the rubber band, it would eventually rip apart right in the middle as the force could not be contained by the elastic fibres and had reached its maximum extension!
Explanation:
HOPE THIS HELPS!!
Who is prime minister of india
His name is
Narendra Modi
Answer:
Hey!
*its kinda the wrong topic but ill answer anyway!!!*
The Prime Minister of India is...
Narendra ModiExplanation:
HOPE THIS HELPS!!
write the different between the fall of a parachute on earth and its fall on the moon?on what condition does a body have free fall?
Answer:
Shown from explanation
Explanation:
You have heard that expression what ever goes up must come down that's usually used to mean when you throw an object up, it comes down on its accord. This is due to a force on the earth that occurs in nature known as gravity.
So when an object falls under this influence it's said to fall freely.
Note not all heavenly bodies have gravitational pull, from experience by scientists who went to the moon they found out whatever goes up keeps flying endlessly so in that case an external force is needed to keep objects in the moon on ground level.
Hence the parachute falls on earth freely without an external force but on the moon it must fall with an external force inputed on the parachute system.
This means in the earth we have free fall but in the moon no such thing exist. So a body falls freely when there is gravity.
What do nuclear fission and nuclear fusion have in common?
A. They start with the same reactants.
B. They're both used in power plants.
C. Their products have more mass than their reactants.
D. Their products have less mass than their reactants.
Answer:
B
Explanation:
Fission and Fission are nuclear reaction processes that releases energy.
Fission is the process where the nuclei of an atom splits into smaller nuclei of same element or elements of smaller nuclei when Fussion is when two smaller nuclei combined to form one of a different element of a higher nuclei. These processes release energy.
Answer:
D. Their products have less mass than their reactants.
Explanation:
energy is the ability to___or___ matter
Energy is defined in science as the ability to move matter or change matter in some other way.
Calculate the weight of an object on earth surface having 600km from surface of earth?
Your question seems to contradict itself. You said "on Earth surface" and then you said "600 km from surface of the Earth" ... both in the same sentence.
I'll assume that the object is actually 600 km from surface of the Earth, because that makes the question (and the answer) more interesting.
We know that the weight of any object is (mass) x (gravity). Those are the two numbers we need in order to calculate the object's weight. Mysteriously, you haven't told us either one. We'll call the object's mass ' M ' (clever, eh ?), and we'll calculate the value of gravity up there where the object is located.
We now that the acceleration of gravity is inversely proportional to the square of the distance between the centers of two objects. When an object is on the Earth's surface, it's 6,371 km from Earth's center, and the acceleration of gravity there is 9.8 m/s².
The object in the question is 600 km farther from Earth's center, so the acceleration of gravity there is
(9.8 m/s²) · (6371 / 6971)² = 8.2 m/s².
So the object's weight is (8.2 M) Newtons.
This is about 84% of its weight on Earth's surface.
(Notice that the astronauts aboard the International Space Station are NOT "weightless". The strength of gravity up there where they are is around 84% of what it is down on the ground. The question of why they float, and why their muscles waste away, is a topic for another Brainly question.)
Which musical instruments produce lower pitches
Answer:
bigger instruments make lower pitches
Explanation:
bass drums and other large instruments have low sounds because they're so big. the smaller the instrument is, the higher pitch it's going to have
Answer:
It is mostly the Bass instruments because they use mouthpieces while the wind instrument use reeds and make a higher pitched sounds
Explanation:
Band
Standing on top of a building, Bob tosses a baseball straight up with an initial speed of 15 m/s. It takes 4.0 s for the ball to hit the ground. What is the vertical distance of the building? (g = -9.8 m/s²)
Answer:
48.26 m
Explanation:
time to goes up (till stop for a while in the air - maximum height)
vt = vo + a t
0 = 15 + g . t
0 = 15 + (-9.8) . t
9.8t = 15
t = 1.531 s
so the time left to goes down is
4.0 - 1.531 = 2.469 s
height from the top of building can find it by using
vo =√(2gh)
15 = √(2)(9.8).h
15² = 19.6h
h = 225/19.6 = 11.48 m
so the distance of maximum height to the ground is
t = √(2H/g)
2.469 = √(2H/9.8)
2.469² = 2H/9.8
6.096 = 2H/9.8
2H = 6.096 x 9.8 = 59.74 m
so the vertical distance of the building (or the building height's is)
H - h = 59.74 - 11.48 = 48.26 m
Please explain it’s in the photo
Answer:
Since air resistance actually stops vehicles and goes in a vector opposite to the direction of the vehicle and slows it down. Vehicles would want to make vehicles aerodynamic. Many cars bump into air molecules therefore making air resistance. Aerodynamic cars will lesser the allowance of bumping into said molecules. Thats why cars like to cut down on air resistance
Air resistance is friction.
-- Friction steals kinetic energy.
-- A car gets kinetic energy by burning gasoline, and uses the kinetic energy to get where it needs to go.
-- If anything steals the car's kinetic energy, then the car has to burn more gasoline to get where it needs to go.
-- Gasoline costs money.
-- Anything that steals a car's kinetic energy costs you more money to operate the car.
(Another thing that takes kinetic energy away from the car is the car's brakes. The driver uses the brakes when he WANTS to slow down or stop, so it's not stealing, but it still costs kinetic energy and money.)
When did Pangaea begin to break apart?
Answer:
Hey!
Well according to scientific data and analysis, it started to break up about 175 - 200 million years ago!!
Explanation:
HOPE THIS HELPS!!
Answer:
250 million (:
Explanation:
Ed biked home from school in 400 seconds. His home is located 2000 m south of the school. What was his velocity?
[tex]answer = 5 \: \: metre \: per \: second\\ distance = 2000 \: m \\ time = 400 \: seconds \\ velocity = \: \frac{distance \:t ravelled}{time \: taken} \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = \frac{2000}{400} \\ \: \: \: \: \: \: \: \: \: = 5 \: metre \: per \: second \\ hope \: it \: helps[/tex]
If a 5kg ball is rolling to the left and has a momentum of -25kg*m/s what is the velocity (not just speed) of the ball
Answer:
The velocity of the ball is 5 m/s to the left.
Explanation:
-25kg*m/s divided by 5 kg gives
speed of -5 m/s
The velocity of the ball is 5 m/s to the left.
Can someone explain what ice jacking is and how it can cause structures to fail?
Answer: Rock slope failures can occur due to the presence of water; ice jacking occurs when water between joint or fissure surfaces freezes and expands. This type of failure is progressive, resulting in incremental weakening over time, often requiring several cycles before failure. Ice jacking is one form of rock erosion.
What observation about light supported Einstein’s theory?
Answer:
Explanation:
Do you mean the theory that space-time is defined by what's in it? And that mass warps space-time?
There are many instances where his observation turned out to be correct. The most popular one is the phenomena of gravitational lensing. We can see the light from stars that are actually behind the sun. The huge gravity of the sun bends space-time and this also bends light. We use gravitational lensing alllll the time when trying to see very distant stars or galaxies.
Answer:
The Sun bent the light from a star. This bending made the star appear in a slightly different position from its actual position. This observation supported Einstein’s theory.
Explanation:
This is the answer on Edmentum! :)
The mass of an object is 50 kg. If its weight is 600N on a certain planet. Calculate the
gravitational field strength of the planet.,
Answer: The answer is 700kg
Explanation:
A student with a mass of 66.0 kg climbs a staircase in 44.0 s. If the distance between the base and the top of the staircase is 14.0 m, how much power will the student deliver by climbing the stairs
[tex]power = 205.8 \: watt \\ solution \\ mass = 66 \: kg \\ time = 44 \: sec \\ distance = 14 \\ now \\ power = \frac{w}{t} \\ \: \: \: \: \: \: \: \: = \frac{f \times d}{t} \\ \: \: \: \: \: = \frac{m \times g \times d}{t} \\ \: \: \: \: \: \: = \frac{66 \times 9.8 \times 14}{44} \\ \: \: \: \: = \frac{9055.2}{44} \\ \: \: \: \: \: = 205.8 \: watt \\ hope \: it \: helps[/tex]
!! i will mark as brainliest so pls answer quick !!
The student becomes negatively charged because of the friction between her socks and the carpet.
Explain why the friction causes the student to become charged
Answer:
A student becomes negatively charged because of the friction between his socks and the carpet. ... The electrons get rubbed and move towards the carpet so the carpets electrons move away and the student becomes negatively charged.
1. Calculate the total binding energy of 12
6 C.
Answer in units of MeV.
2. Calculate the average binding energy per nucleon of 24
12Mg.
Answer in units of MeV/nucleon.
3. Calculate the average binding energy per nucleon of 85
37Rb.
Answer in units of MeV/nucleon.
4. Find the binding energy per nucleon of 238
92U.
Answer in units of MeV/nucleon.
5. Calculate the total binding energy of 20
10Ne.
Answer in units of MeV.
6. Calculate the total binding energy of 40
20Ca.
Answer in units of MeV.
Answer:
1. B = 79.12 MeV
2. B = -4.39 MeV/nucleon
3. B = 2.40 MeV/nucleon
4. B = 7.48 MeV/nucleon
5. B = -18.72 MeV
6. B = 225.23 MeV
Explanation:
The binding energy can be calculated using the followng equation:
[tex] B = (Zm_{p} + Nm_{n} - M)*931 MeV/C^{2} [/tex]
Where:
Z: is the number of protons
[tex]m_{p}[/tex]: is the proton's mass = 1.00730 u
N: is the number of neutrons
[tex]m_{n}[/tex]: is the neutron's mass = 1.00869 u
M: is the mass of the nucleus
1. The total binding energy of [tex]^{12}_{6}C[/tex] is:
[tex] B = (Zm_{p} + Nm_{n} - M)*931.49 MeV/u [/tex]
[tex] B = (6*1.00730 + 6*1.00869 - 12.011)*931.49 MeV/u = 79.12 MeV [/tex]
2. The average binding energy per nucleon of [tex]^{24}_{12}Mg[/tex] is:
[tex] B = \frac{(Zm_{p} + Nm_{n} - M)}{A}*931.49 MeV/u [/tex]
Where: A = Z + N
[tex] B = \frac{(12*1.00730 + 12*1.00869 - 24.305)}{(12 + 12)}*931.49 MeV/u = -4.39 MeV/nucleon [/tex]
3. The average binding energy per nucleon of [tex]^{85}_{37}Rb[/tex] is:
[tex] B = \frac{(Zm_{p} + Nm_{n} - M)}{A}*931.49 MeV/u [/tex]
[tex] B = \frac{(37*1.00730 + 48*1.00869 - 85.468)}{85}*931.49 MeV/u = 2.40 MeV/nucleon [/tex]
4. The binding energy per nucleon of [tex]^{238}_{92}U[/tex] is:
[tex] B = \frac{(92*1.00730 + 146*1.00869 - 238.03)}{238}*931.49 MeV/u = 7.48 MeV/nucleon [/tex]
5. The total binding energy of [tex]^{20}_{10}Ne[/tex] is:
[tex] B = (Zm_{p} + Nm_{n} - M)*931.49 MeV/u [/tex]
[tex] B = (10*1.00730 + 10*1.00869 - 20.180)*931.49 MeV/u = -18.72 MeV [/tex]
6. The total binding energy of [tex]^{40}_{20}Ca[/tex] is:
[tex] B = (Zm_{p} + Nm_{n} - M)*931.49 MeV/u [/tex]
[tex] B = (20*1.00730 + 20*1.00869 - 40.078)*931.49 MeV/u = 225.23 MeV [/tex]
I hope it helps you!
Explain how series circuits use current and voltage and Explain how parallel circuits use current and voltage
'''In a series circuit, the sum of the voltages consumed by each individual resistance is equal to the source voltage. Components connected in parallel are connected along multiple paths so that the current can split up; the same voltage is applied to each component.''
Mass is the amount of what
Answer:
Mass is the amount of matter in a substance.
Explanation:
The basic SI unit for mass is the kilogram (kg).
Help needed plz . Answer what you can. Thanx
Answer:
both a and b have same pressure
Which statements best describe X-rays?
Answer:x rays are electromagnetic waves.
x rays are transverse waves
x rays travel at the speed of light
Explanation:
A remote controlled plane accelerates to a velocity of 21.0 m/s while covering a distance of 87.4 m in 6.11 s. What was the plane's initial velocity?
Answer:
7.61 m/s
Explanation:
Given:
Δx = 87.4 m
v = 21.0 m/s
t = 6.11 s
Find: v₀
Δx = ½ (v + v₀) t
87.4 m = ½ (21.0 m/s + v₀) (6.11 s)
v₀ = 7.61 m/s
71.6
Δx = 87.4 m
v = 21.0 m/s
t = 6.11 s
Find: v₀
Δx = ½ (v + v₀) t
87.4 m = ½ (21.0 m/s + v₀) (6.11 s)
v₀ = 7.61 m/s
When salt is added to the water what happens to the surface?
Answer:
it increases the surface tension of the water
