HELP PLSSSS!!!!!!!!
Using what you can recall from this unit, write one or two short paragraphs describing Ernest Rutherford's
atomic model. If needed, you may search the Internet for descriptions of the model.
Answers
Answer:
Ernest Rutherford's atomic models the basis of our understanding of atoms. The model describes the atom as a tiny and dense with a positively charged core called a nucleus with neutral subatomic particles called neutrons. The model includes negative-charged subatomic particles called electrons that orbit the nucleus.
Ernest Rutherford and his fellow scientist created an experiment in which they bombarded very thin sheets of gold foil with fast moving alpha particles. Alpha particles are a type of radioactive particles that are positively charged. During their time, the current atomic model showed that an atom’s mass and charge are uniformly distributed throughout the atom. Using that model, they expected that the alpha particles would pass through the gold foil with slight deflection or even none at all. While the experiment did show that they were undeflected, they were surprised to see that a small amount bounced of the the foil a large angles.
This experiment led Rutherford to conclude that the particles that were highly deflected must have experienced powerful enough force within the atom to be deflected. He concluded that all of the positive charges and the majority of the mass of the atom must be condensed in a very small space in the atom’s interior, which he called the nucleus. In the nuclear model, the proton and neutrons are in the nucleus, the center of the atom. Electrons a distributed throughout the atom, orbiting the nucleus.
I hope you understand! :)
Ernest Rutherford's model describes the atom as a tiny and dense with a positively charged core called a nucleus with neutral subatomic particles called neutrons. The model includes negative-charged subatomic particles called electrons that orbit the nucleus.
Ernest Rutherford and his fellow scientist created an experiment in which they bombarded very thin sheets of gold foil with fast moving alpha particles. Alpha particles are a type of radioactive particles that are positively charged. During their time, the current atomic model showed that an atom’s mass and charge are uniformly distributed throughout the atom. Using that model, they expected that the alpha particles would pass through the gold foil with slight deflection or even none at all. While the experiment did show that they were undeflected, they were surprised to see that a small amount bounced of the the foil a large angles.
To know more about Rutherford here
https://brainly.com/question/1853483
#SPJ3
Related Questions
4. The octet rule is a rule that governs bond formation. It states that -
a. elements can only gain 8 electrons
b. all elements lose 8 electrons
c.all elements will gain, lose or share electrons in order to obtain 8
electrons in their outer energy level
d. all elements share 8 electrons
Answers
23.45g Cu(0H)2 x 1 mol Cu(0H)2 x 6,022 x 1023 mol Cu(0H) =
__g Cu(0H)2 1 mol Cu(0H)2
= ____molecules Cu(0H2)
please help
Answers
Answer:
I help u after my online class and intervieww
help asap for brainlist
How will you convert 3.45 Kilometers to meter. Choose from the following options.
Question options:
Move the decimal in 3.45 TWO places to the right to increase the value.
Move the decimal in 3.45 TWO places to the left to decrease the value.
Move the decimal in 3.45 THREE places to the right to increase the value.
Move the decimal in 3.45 TWO places to the right to decrease the value.
Answers
Answer:
Move the decimal in 3.45 THREE places to the right to increase the value.
Explanation:
3.45km = 3450m (multiply by 1000)
Answer:
3rd option is the correct answer
Hope this helps!
How you can minimize human impact on the environment?
Answers
PLEASE HELP
Select the statements that are correct regarding this reaction.
This is a fusion process.
This is a fission process.
The mass of the products is exactly equal to the reactants.
Only the number of particles of product equals the number of particles of reactants.
Could be more than one answer
Answers
Answer:
This is a fusion process.
This is a fission process.
Explanation:
Select the statements that are correct regarding this reaction.
This is a fusion process.
This is a fission process.
The mass of the products is exactly equal to the reactants.
Only the number of particles of product equals the number of particles of reactants.
Could be more than one answer
Hydrogen 1 + Lithium 7 yields 2 Helium 4 plus energy
you have merged hydrogen 1 with Lithium 7 to produce a temporary berylium8, so it is fusion, because you are fusing the particles together.
the energy of the impact of the hydrogen on the lithium
causes the temporary berylium 8 to split into 2 helium atoms, so it is then fission, because you are splitting an atom of berylium8.
the mass of the reactants and products are not equal, because some of the energy comes from conversion of the reactant mass to energy by E=mcc
The number of reactant particles does equal the number of product particles, bute answer says ONLY which is not correct
In the given reaction, The mass of the products is exactly equal to the reactants. However this a radioactive process where, lithium and hydrogen react together forming two helium nuclei.
What is mass conservation?According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the total mass of a system is conserved. In a closed system the mass cannot be lost.
For a chemical reaction, new products are formed by regrouping of atoms from the reactants where no new atom is produced not any lost. Hence, the total mass in the reactant side will be equal to the total mass in the product side.
In the given reaction the number of particles are equal in both side as well mass too equal in both side. The total mass in reactant side and product side is 8.
To find more on mass conservation, refer here:
https://brainly.com/question/14549722
#SPJ2
Which statements best describe displacement? Check all that apply.
1.Displacement is measured along the path an object travels.
2.Displacement is a measurement that includes direction.
3.Displacement is the difference between a starting point and an ending point.
4.Displacement is how far an object travels from starting point to ending point.
5.Displacement is measured as a straight line between a starting point and an ending point.
Answers
Answer: The answer is B, C, and E.
Explanation:
Pls, mark me brainliest.
Displacement can be defined as the difference between a starting point and an ending point. Displacement is a measurement that includes direction and is measured as a straight line between a starting point and an ending point. Therefore, option (2), (3), and (5) are correct.
What is displacement?The displacement of an object can be described as the change in the position of an object. The displacement is the minimum length between the initial and the final point.
The displacement is the vector quantity posses both distance and magnitude. Therefore, the measurement of the displacement includes direction.
Displacement can also be described as the difference between a starting point and an ending point. Displacement can be measured as a straight line between a starting point and an ending point.
The S.I. unit of the displacement is the same as the distance i.e. meters and the C.G.S. unit are centimeters.
Learn more about displacement, here:
https://brainly.com/question/14422259
#SPJ2
An electron domain consists of ________. a) a nonbonding pair of electrons b) a single bond c) a multiple bond
Answers
An electron domain consists of ; All of the above options i.e. a ) nonbonding pair of electrons b) a single bond c) a multiple bond.
An Electron domain is the number of bonded locations ( lone pair or bonded ) found around an atom. and the bond location is independent of the type of bonding existing between atoms in a molecule.
Electron domain are also known as electron groups. the types of electron domain are ; nonbonding pair of electrons and bonded atom.
Hence we can conclude that An electron domain consists of ; nonbonding pair of electrons, a single bond and a multiple bond.
Learn more : https://brainly.com/question/25528289
During the electrolysis of fused MgO, how much magnesium can be produced from a charge of 3.00 Faradays
Answers
The mass of magnesium, Mg that can be produced from the electrolysis of MgO using 3 faradays is 36 g
In the electrolyte, we have
Mg²⁺ + 2e —> MgRecall:
1 electron = 1 Faraday
1 mole of Mg = 24 g
From the balanced equation above,
2 Faradays produced 24 g of Mg.
With the above information, we can obtain the mass of magnesium, Mg that will be produced by using 3 faradays. This can be obtained as follow:
From the balanced equation above,
2 Faradays produced 24 g of Mg
Therefore,
3 Faradays will produce = (3 × 24) / 2 = 36 g of Mg
Thus, the mass of Mg obtained by using 3 faradays is 36 g
Learn more: https://brainly.com/question/24268101
If you wanted to find a type of atom in your little finger that has been in its present form (been the same element) since the beginning of the universe, which element should you look for
Answers
An atom that has been present in the little finger and has been in its present form since the beginning of the universe is the element calcium.
The human body, just like every other thing in the universe is composed of atoms. An atom is the smallest particle of a substance that can take part in a chemical reaction.
An atom that has been present in the little finger and has been in its present form since the beginning of the universe is the element calcium. Calcium is found in abundance in human extremities.
Learn more: https://brainly.com/question/1593920
when a gas undergoes an isothermal process, there is
Answers
Answer:
no change in the temperature of the gas.
Explanation:
isothermal process of a gas, can result to compression of the gas or expansion of the gas at a constant temperature (ΔT = 0).
For isothermal gas expansion, work is done in reducing the pressure of the gas by increasing its volume at a constant temperature. The change in the internal energy of this process is zero (ΔU = 0).
For isothermal gas compression, work is done in decreasing the volume of the gas by increasing its pressure at a constant temperature. The change in the internal energy of this process is also zero (ΔU = 0).
Therefore, when a gas undergoes an isothermal process, there is no change in the temperature of the gas.
Make a list of some other common mixtures. Stating what they are mixtures of.
Answers
lemon juice
fry rice
biryani
lassi
slime etc
I need help with this
Answers
Answer:
26.00 units of Volume.....
True/False: Polycrystalline materials have many mis-oriented crystalline grains in their microstructure because the phase transformations used to create these materials (e.g., solidification) occur via a nucleation and growth process.
Answers
The statement 'polycrystalline materials have misoriented crystalline grains because phase transformations occur via a nucleation and growth process' is TRUE. Polycrystalline materials consist of many crystallites.
Polycrystalline materials are solid materials consisting of many crystallites, which vary in both size and orientation.
Polycrystalline materials include, among others, rocks, ice, metals, ceramics, etc.
Nucleation refers to the chemical process by which solid crystals form from a liquid.
In the solidification of polycrystalline materials via nucleation, molecules are first arranged in a particular pattern form which additional particles can be added as the crystal grows.
Learn more in:
https://brainly.com/question/13495541
Which number is NOT a perfect square?
25
8
4
1
Answers
Answer:
8
Explanation:
Why is blood so essential for cell function to occur?
Answers
Explanation:
Blood Provides the Body's Cells with Oxygen and Removes Carbon Dioxide. Blood absorbs oxygen from air in the lungs. It transports the oxygen to cells throughout the body, and it removes waste carbon dioxide from the cells.
Your blood carries oxygen and nutrients to all of the cells in your body. Blood cells also fight infection and control bleeding.
tron 500ml dung dich NAOH 0,1M voi 500ml dung dich HCL 0,12M tinh ph dung dich saun phan ung
Answers
Answer:
Explanation:
"Khối lượng NaOH rắn cần dùng để pha 500mL dung dịch NaOH 0,1M là bao nhiêu?" Để tạo ra dung dịch chứa một mol NaOH, cần hòa tan 40 gam NaOH trong 500mL H2O.
How many mL in 5.867 L?
Answers
Answer:
5867ml is the answer to 5.867L to ml
Gina has brown eyes. Her mother also has brown eyes, but her father has blue eyes. Most of the people in Gina's town have brown eyes.
Gina most likely inherited brown eyes from _______.
A.
her mother
B.
no one
C.
her father
D.
the townspeople
Answers
Answer:
anser is A
Explanation:
the mother genes are always stronger than the dads
Answer:
A
Explanation:
Which of the following is in French
The floor is pink
A dog barks
A cup with steam coming from it will be hot to touch
Answers
Answer:
A dog barks
Explanation:
The joining of nucleotide molecules to form a more complex nucleic acid is an example of: Select one: a. a decomposition reaction be. a denaturation reaction c. a synthesis reaction d. an exchange reaction e. a hydrolysis reaction
Answers
Answer:
Explanation:
C. A synthesis reaction
11. Start level 3 of the balancing equation game. Take turns and write down the equations as you solve them, along with any new strategies you needed for balancing.
CHALLENGE QUESTIONS: BALANCE THE EQUATIONS BELOW.
A. ___ NaNO3 + ___ PbO ___ Pb(NO3)2 + ___ Na2O
B. ___ Ca3P2 + ___ H2O ___Ca(OH)2 + ___ PH3
C. ___Fe2O3 + ___ CO ___Fe + ___ CO2
D. ___NH3 + ___ O2 ___ NO2 + ___ H2O
E. ___FeS + ___O2 ___Fe2O3 + ___SO2
F. ___ C3H6O2 + ___ O2 ___ CO2 + ___ H2O
Answers
In balancing reaction equations, The number of atoms of each element on both sides of the reaction equation must be the same.
The major rule that guides the balancing of chemical reaction equations is that the total number of atoms of each element on the right hand side of reaction equation is equal to the total number of atoms of the same element on the left hand side of the reaction equation. For each of the equations shown;
2NaNO3 + PbO -------> Pb(NO3)2 + Na2OCa3P2 + 6H2O→ 3Ca(OH)2 + 2PH3Fe2O3 + 3CO ------> 2Fe + 3CO24NH3 + 7O2 ------> 4NO2 + 6H2O4FeS + 7O2 -----> 2Fe2O3 + 4SO22C3H6O2 + 7O2 -----> 6CO2 +6H2OLearn more: https://brainly.com/question/8646601
An electrolyte can be checked to ensure that it has correct chemical composition by measuring its _____.
Answers
Answer:
specific gravity
Explanation:
Number of
Protons
Number of
Neutrons
Atomic
Number
Mass
Number
Element
(symbol)
А
7
B.
15
с
D
E
26
56
F.
Using the periodic table, complete the table to describe each atom. Type in your answers.
A
B
с
N
D
Answers
For neutron, the formula is given by A=Z+N
56=26+N
56-25=N
Neutron is 31
The pressure of a gas at 35.6oC is 114.3kPa. What is the pressure when the temperature drops to 17.3oC? Assume constant volume.
Answers
Answer:
107.5252955kPa or 108kPa
Explanation:
Use Gay Lussac's Law, P1/T1 = P2/T2
Manipulate the equation: P2 = P1*T2/T1
Change C to K: 35.6C = 308.75K and 17.3 = 290.45K
Input the values: P2 = (114.3kPa)(290.45K)/308.75K
P2= 107.5252955kPa
You probably want to round to 3 sig figs, so 108kPa
what is the stage that all stars in our galaxy go through
Answers
Answer:
Heavy stars turn into supernovae, neutron stars and black holes whereas average stars like the sun end life as a white dwarf surrounded by a disappearing planetary nebula. All stars, however, follow roughly the same basic seven-stage life cycle, starting as a gas cloud and ending as a star remnant.
How can you increase the strength of the magnetic force on an object like a paper clip?
Answers
Answer:
"Iron bar magnets Fill a bowl or pan with some water. Find something that will float on the water. Lay the magnet on top of this object. The magnet will twirl in the water until it comes to rest pointing exactly north and south due to the magnetic force of the North Pole."-- science.howstuffworks.com. Or you could just increase the surface area.
Explanation:
The strength of the magnet force is maximum at the poles and minimum at the centre. A magnet can exerts a magnetic force on the other magnets as well. Here by using the soft iron bar as the magnet, the strength of the magnetic force on an object can be increased.
A magnetic force is defined as the force that a magnet exerts on certain materials like iron, steel, nickel, etc. This type of force is a non-contact force because it can act from a distance.
By using iron bar magnet or by increasing the numbers of turns of the coil can pick up more paper clips.
To know more about magnetic force, visit;
https://brainly.com/question/30894832
#SPJ2
What is the ability of a substance to change into something else?
Answers
Answer:
chemical synthesis or chemical property
Explanation:
What element does hydrogen on in ?
- metals
- non metals
- metalloids
Answers
Answer:
non-metal
Explanation:
hydrogen is gas
this chart may also help :)
hydrogen is all the first element all the way to the left with the letter H
Your classmate says that the farther the two atoms are apart in a bond, the larger the dipole moment will be. Is your classmate correct
Answers
Answer:
The answer is Yes
Explanation:
I jus got it right no cap
Your classmate says that the farther the two atoms are apart in a bond, the larger the dipole moment will be, this statement is correct.
What is bond ?An enduring attraction between atoms or ions known as a chemical bond is what allows molecules and crystals to form. The bond may be created by the sharing of electrons in covalent bonds or by the electrostatic attraction of two oppositely charged ions, as in ionic bonds.
Chemical bonds are formed when the atoms in a compound's molecule are brought together and kept together by a powerful combining force. Ionic and covalent bonds are the two different kinds of chemical bonding.
Atoms trade or exchange valence electrons to create bonds. The electrons at an atom's outermost energy level, known as valence electrons, have the potential to interact chemically. All chemical bonds are built on valence electrons.
Thus, the farther the two atoms are apart in a bond, the larger the dipole moment will be, this statement is correct.
To learn more about bond, follow the link;
https://brainly.com/question/10777799
#SPJ5
2. Pick two materials that float from the table above.
Observe how high the two materials float in the water and compare this to the density of the two objects.
What do you notice?
An object with a lower density will float
than an object with a higher density.
(higher/lower)
Answers
Explanation:
so let's say fertilizer sinks it would be higher density and like salt it would be a solvent hope that helps honestly it probably did not but kind of a guide I guess and another one is ice it will be like a toy and here's a tip water is and always will be 1 gl
