HELP PLEASE! DUE TONIGHT! If the wind speed in the top figure increased, what would happen to the plane’s ground speed?

Elastic Potential Energy required to bring the cart on the top of the hill= 862.4J

To solve this problem, we need to use the conservation of energy principle. The energy stored in the spring (elastic potential energy) is transformed into kinetic energy as the cart is released, and then into gravitational potential energy as the cart moves up the hill. At the top of the hill, all of the kinetic energy is converted back into potential energy, and the cart comes to rest. Since the spring is 100% efficient, no energy is lost due to friction or other factors.

The equation for elastic potential energy is:

Elastic potential energy = 1/2 * k * x^2

where k is the spring constant and x is the displacement from the equilibrium position. We can assume that the spring is initially compressed by a certain amount, and then released to launch the cart up the hill. The amount of compression is not given in the problem, so we cannot calculate the exact value of k or x. However, we can still solve for the elastic potential energy using the information given.

The equation for gravitational potential energy is:

Gravitational potential energy = m * g * h

where m is the mass of the cart, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the hill. We can calculate the gravitational potential energy as:

Gravitational potential energy = 8.0 kg * 9.8 m/s^2 * 11 m
= 862.4 J

Since the cart comes to rest at the  top of the hill, all of the gravitational potential energy is converted back into elastic potential energy. Therefore:

Elastic potential energy = Gravitational potential energy
= 862.4 J

Note that we did not need to know the values of k or x to solve for the elastic potential energy in this case. However, if we had more information about the spring (such as the spring constant or the amount of compression), we could use the elastic potential energy equation to calculate the energy more precisely.

Visit https://brainly.com/question/29311518 to learn more about Elastic Potential Energy

#SPJ11

The ride's spring constant is 8625 N/m.

The Nerf gun's spring has a spring constant of 920 N/m.

To find the spring constant:

F = kx

where F = force applied to the spring, k = spring constant, and x = displacement of the spring.

Find the force applied to the spring, using Newton's second law:

F = ma

where m = combined mass of the Peas and their car, and a = acceleration of the car as it comes to a stop.

Since the car is initially moving at a constant velocity of 1.0 m/s, its initial acceleration is 0 m/s². Therefore, the only acceleration acting on the car is the deceleration caused by the spring.

To find the deceleration, using the equation:

v² = u² + 2as

where v = final velocity (0 m/s), u = initial velocity (1.0 m/s), a = acceleration, and s = displacement (0.20 m).

Rearranging this equation to solve for a:

a = (v² - u²) / (2s) = (0 - 1.0²) / (2 x 0.20) = -2.5 m/s²

Using Newton's second law to find the force applied to the spring:

F = ma = 690 kg × (-2.5 m/s²) = -1725 N

Finally, use the formula F = kx to solve for k:

k = F / x = -1725 N / (-0.20 m) = 8625 N/m

Therefore, the spring constant of the ride is 8625 N/m.

3) To find the spring constant, use the formula:

v = √(kx² / m)

where v = velocity of the dart, k = spring constant, x = displacement of the spring (0.04 m), and m = mass of the dart (0.92 g = 0.00092 kg).

Solving for k:

k = m v² / x² = 0.00092 kg × (16 m/s)² / (0.04 m)² = 920 N/m

Therefore, the spring constant of the spring used in the Nerf gun is 920 N/m.

Find out more on spring constant here: https://brainly.com/question/1968517

#SPJ1

Single convex lenses can create real and inverted images of distant objects, with size depending on object distance and focal length. The image appears on the opposite side of the lens from the object, between the lens and its focus.

Single convex lenses can be used to make real and inverted images of distant objects. The size of the image depends on the distance of the object from the lens and the focal length of the lens.

If the object is very far away from the lens, the image will be small. The image will occur on the side of the lens opposite to the object and between the lens and its focus.

The image will be real and inverted because the convex lens converges the light rays that pass through it.

To know more about convex lens  , refer here:

https://brainly.com/question/27087947#

#SPJ11

A mass attached to the end of a spring is set in motion, the mass is observed to oscillate up and down, completing 24 complete cycles every 6. 00 s, the period of the oscillation: 0.25 seconds.

The mass attached to the end of a spring completes 24 cycles in 6.00 seconds. To determine the period of the oscillation, we need to find the time taken for one complete cycle. The period (T) is calculated by dividing the total time by the number of cycles, which is:

T = total time / number of cycles = 6.00 s / 24 cycles = 0.25 s per cycle.

The period of the oscillation is 0.25 seconds.

Now, to find the frequency of the oscillation, we need to determine the number of cycles that occur in one second. The frequency (f) is the inverse of the period:

f = 1 / T = 1 / 0.25 s = 4 cycles per second (Hz).

The frequency of the oscillation is 4 Hz.

To know more about oscillation, refer here:

https://brainly.com/question/13112321#

#SPJ11

The power dissipated in the light bulb if it carries a current of 3i is 9p.

The power dissipated by a light bulb is given by the equation P = I²R, where I is the current flowing through the bulb and R is its resistance. Since the same light bulb is being used, its resistance remains constant.

When the current flowing through the bulb is increased to 3i, the power dissipated is given by P' = (3i)²R = 9i²R = 9P,

where P is the power dissipated when the current was i.

Therefore, the power dissipated in the light bulb is multiplied by a factor of 9 when the current is increased to 3i.

Assuming the resistance of the light bulb remains constant, we can use Ohm's law to find the new current when the current is tripled. Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to its resistance. Therefore, when the current is tripled, the voltage across the bulb will also triple since the resistance remains constant.

To know more about the Light bulb, here

https://brainly.com/question/2288858

#SPJ4

All the fossils that have been found over time are collectively called the: fossil record.

The fossil record represents the preserved remains or traces of organisms from the past, providing valuable information about the history of life on Earth. It allows scientists to study the evolution of species, their distribution over time, and how they adapted to their environments.

The fossil record is not complete, as it depends on factors such as preservation conditions and the likelihood of a particular organism leaving behind fossils. However, it still offers a glimpse into the vast diversity of life that has existed throughout Earth's history, enabling researchers to make connections between extinct and living species.

In conclusion, the term for all the fossils that have been found over time is the fossil record. It serves as a crucial source of information for understanding the development of life on our planet, despite its inherent incompleteness due to various factors affecting fossil preservation.

To know more about fossil record, refer here:

https://brainly.com/question/12334063#

#SPJ11

The initial velocity with which the ball must be thrown upwards in order for it to take 6 seconds to return to its initial level is 29.4 meters/second.

Assuming negligible air resistance, the time taken by a ball to go up and come down after being thrown vertically upwards is given by:

t = 2*v/g

where:

t = time taken for the ball to go up and come down (in seconds)

v = initial velocity with which the ball is thrown upwards (in meters/second)

g = acceleration due to gravity

In this case, the time taken for the ball to return to its initial level is given as 6 seconds. Therefore, we can write:

6 seconds = 2*v/g

Rearranging the equation, we get:

v = (6 seconds * g)/2 = 29.4 m/s

To know more about resistance refer here

https://brainly.com/question/14327116#

#SPJ11

Answer and Explanation:

According to the principle of maximum density, water has its highest density at 4°C. This means that 1kg of water will occupy minimum space at a temperature of 4°C. At this temperature, the volume of water is at its lowest, and any further cooling or heating will cause it to expand.

This principle is due to the unique properties of water molecules. As the temperature decreases from room temperature, the molecules begin to slow down and move closer together. However, below 4°C, hydrogen bonding between the molecules begins to dominate, causing them to form a crystal-like structure and expand.

At 0°C, water freezes and expands by about 9%, making it less dense than liquid water. At 100°C, water boils and turns into steam, which occupies much more space than liquid water. At -4°C, the water is still in a liquid state but is not at its maximum density.

In conclusion, the correct answer is 4°C, as this is the temperature at which 1kg of water will occupy minimum space.

1 kg of water will occupy minimum space of 1 m³at 25°C.

Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity. when we add egg yolk into the water, egg yolk has greater density than water( 997 kg/m³), because of higher density of egg yolk it contains higher mass in same volume as water. hence due to higher mass higher gravitational force is acting on the egg yolk therefore it goes down on the inside the water. water will float upon the egg yolk. same situation we have seen when we spread oil in the water. ( in that case water has higher density than oil. that's why oil floats on the water)

To know more about Density :

https://brainly.com/question/29775886

#SPJ2.

The electric force between the two polythene balls is 1.505 N.

We are given the following information:

The two polythene balls have the same charge.

Each ball has an excess of N = 105 protons.

The balls are initially separated by a distance, d = 1.6 m.

The Coulomb constant is k = [tex]8.988 *10^9 N m^2/C^2.[/tex]

To find the electric force between the two polythene balls, we can use Coulomb's Law:

electric force = [tex]k * (q1 * q2) / d^2[/tex]

where:

- k is the Coulomb constant

- q1 and q2 are the charges of the two polythene balls

- d is the distance between the two polythene balls

Since the two polythene balls have the same charge, we can substitute N for both q1 and q2.

So the equation becomes:

electric force = [tex]k * (N * N) / d^2\\[/tex]

Substituting the given values, we get:

electric force = [tex]8.988 *10^9 N m^2/C^2 * (105 * 105) / (1.6 m)^2[/tex]

electric force = 1.505 N (rounded to three decimal places)

To know more about Coulomb's Law refer here

https://brainly.com/question/506926#

#SPJ11

Answer:

Uranus

Explanation:

The centripetal acceleration experienced by an object moving in a circle is given by the formula:

a = v²/r

where a is the centripetal acceleration, v is the speed of the object, and r is the radius of the circle.

In this problem, we are given that the object has a mass of 20 g, which we need to convert to kilograms:

m = 20 g = 0.02 kg

We are also given that the object is moving in a horizontal circle of radius 250 cm at a speed of 50 cm/s. We need to convert these measurements to SI units (meters and seconds) to use the formula for centripetal acceleration:

r = 250 cm = 2.5 m

v = 50 cm/s = 0.5 m/s

Now we can calculate the centripetal acceleration:

a = v²/r = (0.5 m/s)² / 2.5 m = 0.1 m/s²

Therefore, the centripetal acceleration experienced by the object is 0.1 m/s².

In this scenario, we need to use the Doppler effect equation to calculate the minimum velocity required for the sound to be heard. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source.

The equation we will use is:

f' = f (v + vobs) / (v - vs)

Where f is the original frequency (35.1 kHz), v is the velocity of sound (343 m/s), vobs is the velocity of the observer (126 m/s), and vs is the velocity of the source (which is assumed to be zero in this case).

To find the new frequency, f', that would be heard by the second airplane, we need to solve for v2, the velocity of the second airplane. We also need to know the range of audible frequencies, which is typically between 20 Hz and 20 kHz.

If we plug in the given values, we get:

f' = 35.1 kHz (343 m/s + 126 m/s) / (343 m/s - v2)

Simplifying this equation gives:

f' = 1.304 + 0.00367v2

To find the minimum velocity that would put the frequency in the audible range, we can set f' equal to 20 kHz:

20 kHz = 1.304 + 0.00367v2

Solving for v2 gives:

v2 = 5,355 m/s

This means that the second airplane must fly at a minimum velocity of 5,355 m/s in order for the sound to be shifted into the audible frequency range. This is obviously impossible, so the whistle would not be heard by the second airplane.

In conclusion, the Doppler effect is a fascinating phenomenon that can help us understand how waves behave when the observer or source is in motion. By using the Doppler equation, we can calculate the shift in frequency and determine whether a sound will be audible or not. In this particular scenario, we see that the minimum velocity required for the sound to be heard is far beyond what is physically possible.

To know more about Doppler effect refer here

https://brainly.com/question/15318474#

#SPJ11

The car has a nonzero acceleration in the following situations:

Acceleration is defined as the rate of change of velocity with respect to time. Therefore, any change in the velocity of the car, whether it is an increase, decrease, or change in direction, results in a nonzero acceleration. When the car starts from rest and speeds up or comes to a stop, its velocity changes, resulting in a nonzero acceleration.

Similarly, when the car comes to a complete stop while traveling around a curve or in a straight line, its velocity changes direction, resulting in a nonzero acceleration. However, when the car is on cruise control and traveling at a constant speed in a straight line, its velocity is not changing, and therefore, its acceleration is zero. Options 1, 2, and 3 are correct.

To know more about the Cruise control, here

https://brainly.com/question/13607082

#SPJ4

The gravitational attraction between the two objects is approximately 167.5 N, which is closest to option B. 0.17 N.

We'll use the gravitational attraction formula to find the gravitational force between two objects of mass 5,000,000 kg ([tex]5×[/tex][tex]10^{6}[/tex] kg) at a distance of 100 meters from each other, with an estimated gravitational constant (G) of [tex]6.67[/tex]×[tex]10^{-11}[/tex] N(m/kg)².

The formula is:
F = [tex]G(\frac{mM}{r^{2}})[/tex]
where F is the gravitational force, G is the gravitational constant, m₁, and m₂ are the masses of the two objects, and r is the distance between them.

F=[tex]\frac{(6.67)(10^{-11} )[(5.0)(10^{6})]^2}{(100)^2}N[/tex]

Step 1: Calculate the product of the masses:
[tex](5.0)(10^6)(5.0)(10^6) = 25(10^{12} )[/tex] kg²

Step 3: Calculate the square of the distance:
[tex]100^{2} m^{2}[/tex] = 10,000 m²

Step 4: Calculate the gravitational force:
F =  [tex]\frac{(6.67)(10^{-11} )(25.0)(10^{12})}{(10,000)} N[/tex]

Step 5: Simplify the equation:
F = [tex](6.67)(25)10^{-11 + 12 - 4} N[/tex]

Step 6: Calculate the final value:
F ≈ [tex]167.5[/tex]×[tex]10^{-3}[/tex]≈ 167.5 N

To know more about the calculation of gravitational attraction visit:

https://brainly.com/question/28009700

#SPJ11

The most likely reason for not seeing the Power Pivot tab is that the add-in is not enabled in Excel.

By default, the Power Pivot add-in is not enabled in Excel, and it needs to be enabled manually.

To enable the Power Pivot add-in, go to the File tab in Excel, select Options, and then select Add-Ins. In the Manage box, select COM Add-ins, and then select Go.

In the COM Add-Ins dialog box, select Microsoft Power Pivot for Excel, and then select OK.

After enabling the add-in, the Power Pivot tab should now be visible in Excel.

To know more about Power Pivot , refer here:

https://brainly.com/question/30087051#

#SPJ11

Your neighbor will finish cutting her lawn at 10:00 am, which is one hour after both of you started.

Since your lawn is twice as large as your neighbor's lawn, it takes you a certain amount of time to cut it, which we can analyze to determine when your neighbor will finish cutting her lawn.

You started cutting your lawn at 9:00 am and finished at 11:00 am. This means it took you 2 hours to complete the task. Since your neighbor's lawn is half the size of yours, it will take her half the amount of time to finish cutting her lawn, assuming you both exert the same force using the same self-propelled lawn mower.

To calculate the time it will take your neighbor to cut her lawn, simply divide your time (2 hours) by 2. This gives us 1 hour. Your neighbor started cutting her lawn at the same time you did, 9:00 am, and will take 1 hour to complete the task.

For more about lawn:

https://brainly.com/question/14722533

#SPJ11

The part of the circuit that connects the battery, switch, and red bulb is a critical component in ensuring that the circuit functions correctly. The battery is the power source that provides the energy needed to light up the red bulb, while the switch is the control mechanism that allows the user to turn the circuit on and off.

When the switch is closed, the circuit is completed, and the battery's energy is directed through the wires and into the red bulb. The bulb then converts this energy into light, illuminating the area around it. However, when the switch is open, the circuit is broken, and no energy flows through it.

It is essential to ensure that the connections in this part of the circuit are secure and correctly placed. Any loose or improper connections can cause the circuit to malfunction or not work at all. Additionally, it is crucial to use the correct voltage and amperage rating for the battery and bulb to ensure that they operate within their specified limits and do not damage the circuit.

Overall, the part of the circuit that connects the battery, switch, and red bulb is a crucial component that enables the circuit to function correctly. By ensuring that the connections are secure and the components are properly rated, users can enjoy a safe and reliable circuit that lights up the area around them.

To know more about battery refer here

https://brainly.com/question/11670669#

#SPJ11

The final common velocity of the two trucks after the collision is 14.53 m/s.

To calculate the final common velocity of the two trucks after the collision, we will use the law of conservation of momentum. The given terms are: the mass of the first truck (8 tons), its velocity (60 km/h), the mass of the second truck (5 tons), and its velocity (40 km/h).

First, we need to convert the velocities from km/h to m/s:

60 km/h = (60 * 1000 m) / (3600 s) = 16.67 m/s
40 km/h = (40 * 1000 m) / (3600 s) = 11.11 m/s

Next, we calculate the initial momentum of both trucks:

Initial momentum = (mass of first truck * its velocity) + (mass of second truck * its velocity)
Initial momentum = (8 * 16.67) + (5 * 11.11) = 133.36 + 55.55 = 188.91 kg m/s

Since both trucks move together after the collision, we can find their combined mass (13 tons) and use it to calculate the final common velocity:

Final common velocity = Initial momentum / Combined mass
Final common velocity = 188.91 kg m/s / 13 tons = 14.53 m/s

So, the final common velocity of the two trucks after the collision is 14.53 m/s.

To know more about collision, refer here:

https://brainly.com/question/24616147#

#SPJ11

The speed of the block after it has moved 2.9 m is approximately 5.14 m/s.

We can use the work-energy principle to find the speed of the block after it has moved 2.9 m. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy.

Since there is no friction acting on the block, the net work done on it is equal to the work done by the applied force:

Net work = Work done by applied force = Fd

where F is the applied force and d is the distance moved by the block.

The change in kinetic energy of the block is given by:

Δ[tex]K = 1/2 mv^2 - 1/2 m(0)^2 = 1/2 mv^2[/tex]

where m is the mass of the block and v is its final velocity.

Since the net work done on the block is equal to its change in kinetic energy, we can set these two expressions equal to each other:

[tex]Fd = 1/2 mv^2[/tex]

Solving for v, we get:

[tex]v = \sqrt{(2Fd/m)[/tex]

Substituting the given values, we get:

[tex]v = \sqrt{(2 *12.3 N * 2.9 m / 2.5 kg)} = 5.14 m/s[/tex]

To know more about work-energy principle refer here

https://brainly.com/question/28043729#

#SPJ11

Yes, I do think that the idea that we are "star stuff" has significant philosophical implications. Firstly, it challenges the notion that we are separate from the universe and reinforces the idea that we are interconnected with everything around us.

This can lead to a sense of awe and wonder about the universe and our place in it.

Additionally, the idea that we are made of the same material as stars can inspire a sense of responsibility to take care of the planet and our fellow human beings. We are not just individuals, but part of a larger whole, and our actions can have an impact on the world around us.

From a societal perspective, this understanding can lead to a greater appreciation for science and the pursuit of knowledge. It can also inspire a sense of unity and cooperation among different cultures and nations, as we all share this common connection to the universe.

Overall, recognizing our connection to the stars can have profound implications for how we view ourselves and our place in the world, and can inspire us to live more consciously and responsibly.

To learn more about responsibility, refer below:

https://brainly.com/question/29729388

#SPJ11

The ball takes about 3.06 seconds to reach the top of its path.

When a ball is thrown or hit straight up, it will reach its maximum height at the point where its vertical velocity becomes zero.

At this point, the ball's acceleration will be equal to the acceleration due to gravity, which is -9.8 m/s².

Using the equation of motion for an object with constant acceleration, we can find the time it takes for the ball to reach the top of its path:

vf = vi + at

where vf is the final velocity (which is zero when the ball reaches its maximum height), vi is the initial velocity (30 m/s), a is the acceleration (-9.8 m/s²), and t is the time we're looking for.

Rearranging the equation, we get:

t = (vf - vi) / a

Since the final velocity is zero, we have:

t = -vi / a

Substituting the values, we get:

t = -30 m/s / (-9.8 m/s²)

t = 3.06 seconds

To know more about equation of motion refer here

https://brainly.com/question/15080570#

#SPJ11

The wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.

The wavelength of the light in a vacuum can be calculated using the formula λ = c/f, where λ is the wavelength, c is the speed of light in a vacuum (299,792,458 meters per second), and f is the frequency of the light.

Using this formula, we can find the wavelength of the violet light as follows:

λ = c/f
λ = 299,792,458 m/s / 7.5 x 10^14 Hz
λ = 3.997 x 10^-7 meters

Therefore, the wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.

In summary, the frequency of violet light is a measure of how fast it oscillates, and its wavelength in a vacuum can be calculated using the speed of light and frequency of the light. Knowing the wavelength of a particular color of light is useful in many fields, including astronomy, physics, and optics.

For more about violet light .

https://brainly.com/question/11879525

#SPJ11

To fathom this issue, we have to be utilize Newton's moment law of movement, which states that the net force acting on an question is equal to the item of its mass and increasing speed. Able to utilize this law to discover the speeding up of the object:

Net force= ma

where m is the mass of the object and a is its increasing speed.

In this case, the net force is the horizontal force of 18N short the frictional constrain of 7N:

Net constrain = 18N - 7N = 11N

The mass of the object is given as 30N, so we are able modify the condition to unravel for the speeding up:

a = Net force / m = 11N / 30N = 0.37 m/s^2

Hence, the object is accelerating at a rate of 0.37 m/s^2 along the table.

Learn more about  newton second law from

https://brainly.com/question/25545050

#SPJ1

Answer:

b. As distance increases, magnetic force decreases.

Explanation:

The correct answer is b. As distance increases, the magnetic force decreases. Magnetic force obeys an inverse square law with distance. This means that the force is inversely proportional to the distance squared. For example, if the distance between two magnets is doubled, the magnetic force between them will fall to a quarter of the initial value.

A submarine diving to a depth of 500 m would experience a pressure of 5,068,625 Pa on its hull, which is approximately 50 times greater than the atmospheric pressure at sea level.

a) When a submarine dives to a depth of 500 m, the pressure on its hull increases due to the weight of the water above it.

The pressure at this depth can be calculated using the formula [tex]P = \rho gh[/tex], where ρ is the density of seawater, g is the acceleration due to gravity, and h is the depth.

Plugging in the values, we get P = (1025 kg/m³)(9.81 m/s²)(500 m) = 5,068,625 Pa.

b) To determine how many times greater the pressure is at a depth of 500 m compared to the surface, we can divide the pressure at 500 m by the atmospheric pressure at sea level.

Converting 14.7 psi to Pa, we get 101,325 Pa. Dividing 5,068,625 by 101,325 gives us approximately 50 times greater.

In summary, a submarine diving to a depth of 500 m would experience a pressure of 5,068,625 Pa on its hull, which is approximately 50 times greater than the atmospheric pressure at sea level.

To know more about pressure refer here:

https://brainly.com/question/28907914#

#SPJ11

The final velocity of the soccer ball is 65.2 m/s. This is to calculate the momentum of the foot before collision. Use coefficient of restitution to calculate velocity of separation.

To find the velocity of the soccer ball after being kicked, we can use the law of conservation of momentum and the coefficient of restitution. The law of conservation of momentum states that the momentum before the collision is equal to the momentum after the collision.

Here's how we can solve the problem:

Calculate the momentum of the foot before the collision:

Momentum = mass x velocity = 7.8 kg x 16.1 m/s = 125.58 kg m/s

During the collision, some of the momentum is transferred to the ball. The amount of momentum transferred depends on the coefficient of restitution, which is given as 0.48. The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach.

Use the coefficient of restitution to calculate the velocity of separation:

Velocity of separation = coefficient of restitution x velocity of approach

Velocity of separation = 0.48 x 16.1 m/s = 7.728 m/s

Calculate the velocity of the ball after the collision using the law of conservation of momentum:

Momentum before collision = Momentum after collision

(7.8 kg x 16.1 m/s) = (1.0 kg x velocity of ball) + (7.8 kg x 7.728 m/s)

125.58 kg m/s = 1.0 kg x velocity of ball + 60.38 kg m/s

Velocity of ball = (125.58 kg m/s - 60.38 kg m/s)/1.0 kg

Velocity of ball = 65.2 m/s

Therefore, the velocity of the soccer ball after being kicked is 65.2 m/s.

In summary, we can use the law of conservation of momentum and the coefficient of restitution to find the velocity of the soccer ball after being kicked. The momentum before the collision is equal to the momentum after the collision.

The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach. Using these equations, we calculated the velocity of the soccer ball to be 65.2 m/s.

To know more about velocity refer here:

https://brainly.com/question/19979064#

#SPJ11

The strength of two dams is compared by calculating their potential energy based on the height of the water they hold back. The Very Big Dam has greater potential energy than the Really Big Dam, making it stronger.

To determine which dam is stronger, we need to compare their potential energy due to the water they are holding back. The potential energy of the water is given by the formula:

PE = mgh

where PE is the potential energy, m is the mass of the water, g is the acceleration due to gravity, and h is the height of the water.

Since the dams are the same width, we can assume they have the same mass of water. Therefore, the potential energy depends only on the height of the water.

The height of the water in the Really Big Dam is 60 feet, and the lake extends back one-quarter of a mile or 1320 feet. Therefore, the potential energy of the water is:

PE1 = mgh = (mass of water) x g x h

[tex]PE1 = (1000 ft \times 1320 ft \times 60 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]

The height of the water in the Very Big Dam is 50 feet, and the lake extends back two miles, or 10560 feet. Therefore, the potential energy of the water is:

PE2 = mgh = (mass of water) x g x h

[tex]PE2 = (1000\; ft \times 10560\; ft \times 50 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]

Calculating the two potential energies, we find that PE2 is greater than PE1. Therefore, the Very Big Dam had to be constructed to be strongest.

In summary, to determine which dam is stronger, we compare its potential energy due to the water they are holding back. Since the dams have the same width, the potential energy depends only on the height of the water.

Calculations show that the potential energy of the water held by the Very Big Dam is greater than the Really Big Dam, making it the stronger of the two dams.

To know more about potential energy refer here:

https://brainly.com/question/30672627#

#SPJ11

This is because kilohertz means 1000 hertz, so by multiplying the AM frequency in kilohertz by 1000, we obtain the frequency in hertz. So 1440 kHz is equal to 1,440,000 Hz.

AM (amplitude modulation) is a type of radio transmission where the amplitude of the carrier wave is varied in proportion to the information signal.

It is specified in terms of frequency in kilohertz (kHz). To convert 1440 AM to Hz, we need to multiply it by 1000.

Therefore, 1440 AM = 1440 kHz = 1440000 Hz.

This is because kilohertz means 1000 hertz, so by multiplying the AM frequency in kilohertz by 1000, we obtain the frequency in hertz. So 1440 kHz is equal to 1,440,000 Hz.

To know more about amplitude modulation, refer here:

https://brainly.com/question/13265507#

#SPJ11