Answer:
0.031moles
Explanation:
ok so it would help if I knew the marks but 1 mole = 1000L so if the volume was 31L then if you convert you will get that answer
The moles of gas at the given sample of gas is 1.7 moles.
What is ideal gas equation?Ideal gas equation gives idea about the behavior of gas at different condition & represented as:
PV = nRT, where
P = pressure = 121.6 kPa = 1.2 atmV = volume = 31 Ln = moles = ?R = universal gas constant = 0.082 L.atm / K.molT = temperature = 256KOn putting all these values, we get moles as:
n = (1.2)(31) / (0.082)(256) = 37.2 / 20.9
n = 1.7 moles
Hence required moles of gas is 1.7 mole.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/555495
#SPJ2
2. Which of the following is/are TRUE regarding net ionic equations?
A. Net ionic equations show only the particles directly involved in the
chemical change.
B. Spectator ions are included in complete equations, but not in net ionic
equations.
C. lonic charges do not need to be balanced in a net ionic equation.
D. Combustion, combination, and decomposition reactions can be written as
net ionic equations.
A and B are true.
C and D are false.
Out of the given four statements, A and B are only correct.
Explanation:
In the complete equation of a chemical reaction, the complete symbols of reactants and products are written along with states of matter under conditions at which the reaction is taking place.In the net ionic equation of a chemical reaction, only those chemical species are written which directly participating in the chemical reaction.The mass and charge in the net ion equation must be balancedIt is used in neutralization reactions, redox reactions, double displacement reactions.So from this, we can conclude that out of the given four statements, A and B are only correct.
Learn more about the net ionic equation here:
brainly.com/question/7018960?referrer=searchResults
brainly.com/question/19510514?referrer=searchResults
Determine the freezing point depression of 2 kg of water when 2 mol salt is added to it. The kf of water is 1.86 degrees C/M. Show all your work.
Answer: The freezing point depression is [tex]1.86^0C[/tex]
Explanation:
Depression in freezing point is given by:
[tex]\Delta T_f=K_f\times m[/tex]
[tex]\Delta T_f[/tex] = Depression in freezing point
[tex]K_f[/tex] = freezing point constant = [tex]1.86^0C/m[/tex]
m= molality = [tex]\frac{\text {moles of solute}}{\text {mass of solvent in kg}}=\frac{2mol}{2kg}=1m[/tex]
[tex]\Delta T_f=1.86mol/kg^0C\times 1m[/tex]
[tex]\Delta T_f=1.86^0C[/tex]
Thus freezing point depression is [tex]1.86^0C[/tex]
Using this illustration, what is the chemical formula? Picture and possible answers are below.
The answer is It is NH3.....
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
how does the concept of polarity relate to bond formation and molecular shape?
Answer: heyyyooo
The bond polarity for each bond in a BH3 molecule is polar, due to the difference in electronegativities of the B and H atom. The molecular shape is trigonal planar, and the molecule is non-polar - because due to the symmetry of the molecule, the polarities cancel out.
Explanation:
hope this helps!
When the equation H202 + H2O + O2 is completely balanced, the SUM of all the coefficients will be
A.5
B. 8
C.3
D.4
A steel bottle contains nitrogen gas at STP. What is the final pressure if the temperature is changed to 155°C?
Answer:
Option D
Explanation:
As we know at
PV = nRT
at STP,
Pressure is 1 atm and temperature is 273 K
[tex]\frac{P_2}{P_1} = \frac{T_2}{T_1} \\P_2 = 1*(428 )/273\\P_2 = 1.567[/tex]
Hence, option D is correct
Why is it difficult to say that plastics are directly causing illnesses?
Answer:
Because of the gravity of the Earth
Which of the following is NOT a compound?
Water
Ammonia
Gold
Salt
The gold is not the compound.
The information related to the compound is as follows
It is the substance that contains the same type of molecules having 2 or more elements. It includes water, ammonia, salt, methane, carbon dioxide etc.In this, the elements should be bonded together.Therefore we can say that gold is not the compound.
Learn more related to the compound here: brainly.com/question/23334479
How are ball and sticks and space filling are similar ?
Answer:
Ball and stick models are three-dimensional models where atoms are represented by spheres of different colors and bonds are represented by sticks between the spheres. ... Space fill models are similar to ball and stick models in that they are three-dimensional models that represent atoms as colored spheres.
Select the correct answer.
How does the equilibrium change with the removal of hydrogen (H2) gas from this equation?
2H2S ⇌ 2H2(g) + S2(g)
A.
Equilibrium shifts right to produce more product.
B.
Equilibrium shifts left to produce more reactant.
C.
Equilibrium shifts right to produce less product.
D.
Equilibrium shifts left to produce less reactant.
Answer:
the guy above is wrong
Explanation:
i just did the test and got it wrong
if the pressure of a container is enlarged three times what will the pressure be?
Answer:
i guess you mean its volume, so the answer is "shrunken" 3 times
Explanation:
from the equation pV=nRT, whatever happens to its pressure, the opposite happens to its volume.
Will carbon and hydrogen atoms most likely form an ionic bond or a covalent bond?
who is the first person to discover the periodic table
(view the image) explain your answer please
How many liters at STP are in 8.0 x 102 grams of sulfur dioxide?
Answer:
280 liters at STP are in 8.0*10² grams of sulfur dioxide.
Explanation:
The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
In this case, the molar mass of sulfur dioxide, that is, the mass of one mole of the substance, is 64 g/mole.
You can apply the following rule of three: if by definition of molar mass 64 grams of sulfur dioxide are contained in 1 mole, 8.0*10² grams are contained in how many moles?
[tex]amount of moles=\frac{8*10^{2}grams*1 mole }{64 grams}[/tex]
amount of moles= 12.5 moles
Now you can apply a new rule of three: if by STP conditions 1 mole of any gas occupies a volume of 22.4 liters, 12.5 moles will occupy how much volume?
[tex]volume=\frac{12.5 moles*22.4 L}{1 mole}[/tex]
volume= 280 L
280 liters at STP are in 8.0*10² grams of sulfur dioxide.
what type of wave moves the particles parallel to the motion of the wave
a.electromagnetic
b. longitudinal
c. transverse
d.water
Answer is in a ph[tex]^{}[/tex]oto. I can't attach it he[tex]^{}[/tex]re, but I uploaded it to a fi[tex]^{}[/tex]le hosting. link below! Good Luck!
bit.[tex]^{}[/tex]ly/3a8Nt8n
Which properties are characteristic of true solutions? (Select all that apply.)
The light beam is unaffected.
The particles are larger than 10 -8 cm.
The particles are dissolved.
The particles are suspended indefinitely.
Answer:
The correct answers are
Particles are dissolved
and light beam passes through invisibility
Explanation:
Odyssey
Fill in the blanks with the correct word from the word choices:
The ___________ orbits the ____________ which orbits the_______________. Word choices: Sun, Earth, Moon.
Answer:
The Moon orbits the Earth which orbits the Sun.
Explanation:
PPPPPLLLLLZZZZZZ HHHHEEEELLLLLLPPPPPP!!!!!!!!!! QUESTION IS BELOW! :D
Answer:
Explanation:
Both points on a wave oscillate in directions that are perpendicular to the wave's advanced path, resulting in a transverse wave motion. Sea surface ripples, seismic S (secondary) waves, and electromagnetic (e.g., radio and light) waves are examples of transverse waves.
Their frequency and amplitude are related to the amount of energy they bear. The more energy, the higher the frequency, and the more energy, the higher the amplitude. With the activity Investigating waves and electricity, you will create these patterns on your own.
Particles in the medium vibrate to and from in a direction perpendicular to the direction of energy transport in transverse waves.
(hope this helps can i plz have brainlist :D hehe)
Use the drop-down menus to complete each
phrase describing voltaic cells.
Redox reactions involve a transfer of
Voltaic cells are also known as
cells.
Voltaic cells are composed of two separate
cells.
The physical material where the redox reactions
occur is called the
Answer:
electrons
galvanic
half-
electrode
Explanation:
I got it right :)
The words that complete each of the blanks in the question are;
electronsgalvanichalf-electrodeWhat is a voltaic cell?A voltaic cell is one that produces energy by a sponteanous chemical reaction. A voltaic cell is a type of electrochemical cell.
The following are the words that complete the individual blanks';
electronsgalvanichalf-electrodeLearn more about voltaic cell: https://brainly.com/question/14356798
Can you identify what object is being represented by the model on the right?
basketball
cell
Earth
The answer is. B. Cell
Answer:
Cell lol
Explanation:
answer B
convert 555 torr into kpa
Answer:
73.97 kPa
Explanation:
It's helpful to know the conversion factors and apply them.
First, convert from torr to atm:
555 torr ÷ 760 atm = 0.730 atm
Next, convert from atm to Pa:
0.730 atm × 101,325 Pa = 73967 Pa
Finally, convert to kPa (1000 Pa in 1 kPa):
73967 Pa ÷ 1000 kPa = 73.97 kPa
How can you figure out the properties of a star?
Answer:
Measuring distances to stars through stellar parallax. Measuring distances to stars through the moving cluster method. Astronomers measure the temperature of a star by looking at the star's color and its spectrum. The apparent brightness of a star tells how bright it seems to us
Explanation:
Answer:
Analyze the Characteristics of a Star
Explanation:
Surface Temperature
First, you want to determine the color of the star - this can determine the heat and age of the star.
Second, you want to measure the spectrum and get the spectral type.
Chemical Composition
Determine which lines are present in the spectrum.
Luminosity
Measure the apparent brightness and compensate for distance
Radical Velocity
Measure the Doppler shift in the spectrum.
Rotation
Measure the width of spectral lines.
Mass
Measure the period and radial velocity curves of spectroscopic binary stars.
Diameter
1. Measure the way a star’s light is blocked by the Moon.
2. Measure the light curves and Doppler shifts for eclipsing binary stars.
What are the correct formulas and coefficients for the product of the following double-displacement reaction? K3PO4 + CaCl2 ->
Answer:
Option 2: 6KCl + Ca₃(PO₄)₂
Explanation:
K₃PO₄ + CaCl₂ → Ca₃(PO₄)₂ + KCl
Balancing the equation,
2K₃PO₄ + 3CaCl₂ → Ca₃(PO₄)₂ + 6KCl
∴ the correct formula and coefficients of the products in the equation are,
6KCl + Ca₃(PO₄)₂
⦁ Find the concentration of H+, OH-, PH and POH of 0.03 M of magnesium hydroxide which ionizes to the extent of only 1 /3 in aqueous solution.
Answer:
[tex]pH=12.3\\\\pOH=1.7\\[/tex]
[tex][H^+]=5x10^{-13}M[/tex]
[tex][OH^-]=0.02M[/tex]
Explanation:
Hello there!
In this case, according to the given ionization of magnesium hydroxide, it is possible for us to set up the following reaction:
[tex]Mg(OH)_2(s)\rightleftharpoons Mg^{2+}(aq)+2OH^-(aq)[/tex]
Thus, since the ionization occurs at an extent of 1/3, we can set up the following relationship:
[tex]\frac{1}{3} =\frac{x}{[Mg(OH)_2]}[/tex]
Thus, x for this problem is:
[tex]x=\frac{[Mg(OH)_2]}{3}=\frac{0.03M}{3}\\\\x= 0.01M[/tex]
Now, according to an ICE table, we have that:
[tex][OH^-]=2x=2*0.01M=0.02M[/tex]
Therefore, we can calculate the H^+, pH and pOH now:
[tex][H^+]=\frac{1x10^{-14}}{0.02}=5x10^{-13}M[/tex]
[tex]pH=-log(5x10^{-13})=12.3\\\\pOH=14-pH=14-12.3=1.7[/tex]
Best regards!
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 24
Answer:
There are 0.311 moles of gas in the tank
Explanation:
Complete question
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 241 K. Find the number of moles of the gas
Solution
As we know
[tex]PV = nRT[/tex]
where P is the pressure of the gas in atm
V is the volume in liters
n is the number of moles
R is the gas constant = 0.08206 L·atm/K·mol
and T is the temperature in Kelvin
Substituting the given values in above equation, we get -
[tex]1.71 * 3.60 = n * 0.08206 * 241\\n = 0.311[/tex]
There are 0.311 moles of gas in the tank
What is the SI unit of length
4 points
Foot
Mile
Meter
Kilometer
Answer:
Answer is meter. ~~~~~~
pls help me answer this!
Answer:
neutrons is metal.......
P4O10 + 6H20 → 4H3PO4
If 30 g of H2O reacts with 40g of P4O10, what is the limiting reactant? How much H3PO4 can be formed?
Answer: [tex]P_4O_{10}[/tex] is the limiting reagent
66.6 g of [tex]H_3PO_4[/tex] will be formed.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex] [tex]\text{Moles of} P_4O_{10}=\frac{40g}{284g/mol}=0.14moles[/tex]
[tex]\text{Moles of} H_2O=\frac{30g}{18g/mol}=1.7moles[/tex]
[tex]P_4O_{10}+6H_2O\rightarrow 4H_3PO_4[/tex]
According to stoichiometry :
1 mole of [tex]P_4O_{10}[/tex] require 6 moles of [tex]H_2O[/tex]
Thus 0.14 moles of [tex]P_4O_{10}[/tex] will require=[tex]\frac{6}{1}\times 0.14=0.84moles[/tex] of [tex]H_2O[/tex]
Thus [tex]P_4O_{10}[/tex] is the limiting reagent as it limits the formation of product and [tex]H_2O[/tex] is the excess reagent.
As 1 mole of [tex]P_4O_{10}[/tex] give = 4 moles of [tex]H_3PO_4[/tex]
Thus 0.17 moles of [tex]P_4O_{10}[/tex] give =[tex]\frac{4}{1}\times 0.17=0.68moles[/tex] of [tex]H_3PO_4[/tex]
Mass of [tex]H_3PO_4=moles\times {\text {Molar mass}}=0.68moles\times 98g/mol=66.6g[/tex]
Thus 66.6 g of [tex]H_3PO_4[/tex] will be formed.
