Help! I need this within an hour!

suppose that a flat loop of wire with an area of 0.050 m2 lies in a magnetic field normal to the loop. if the magnetic field changes at a uniform rate from 0.30 t to 1.5 t it induces an emf of 1.2 volts in the loop. find the time interval for the change.

0.023 sec
0.050 sec
0.073 sec
0.085 sec

The momentum of an object is directly proportional to its mass and velocity. Therefore, the momentum of the larger truck can be calculated as follows:

Momentum of larger truck = (2 x mass of smaller truck) x (1/2 x velocity of smaller truck)

Momentum of larger truck = (2 x m) x (0.5 x 20)

Momentum of larger truck = m x 20

This shows that the momentum of the larger truck is equal to the momentum of the smaller truck, as the increased mass is balanced by the decreased velocity.

In other words, the momentum of an object depends on both its mass and velocity, and changes in one factor can be compensated by changes in the other factor to maintain the same momentum.

To know more about Momentum, refer here:

https://brainly.com/question/30677308#

#SPJ11

If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s when it travels a distance of 5 m to the right. The magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.

To determine the magnitude of force P acting on the crate, we need to use the equations of motion and the concept of friction. The force acting on the crate can be expressed as the sum of the force due to P and the force due to friction.

First, we can calculate the force due to friction, which is given by the formula Ff = μk x Fn, where Fn is the normal force acting on the crate. Fn can be calculated by multiplying the mass of the crate by the acceleration due to gravity (9.8 m/s²):

Fn = m x g

Fn = 50 kg x 9.8 m/s²

Fn = 490 N.

Therefore, Ff = 0.3 x 490 N = 147 N.

Next, we can use the equations of motion to calculate the force due to P. We can use the formula[tex]v^2 = u^2 + 2as[/tex], where u = 0 m/s (since the crate starts from rest), v = 4 m/s, and s = 5 m.

Solving for a, we get [tex]a = 4^2 / (2 \times 5) = 1.6\; m/s^2.[/tex] The force due to P can be calculated using the formula F = ma, where m is the mass of the crate:[tex]F = 50 \;kg \times 1.6\; m/s^2 = 80 N.[/tex]

Finally, we can add the force due to friction and the force due to P to get the total force: Ftotal = Ff + F = 147 N + 80 N = 227 N.

Therefore, the magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.

In summary, to determine the magnitude of force P acting on a crate, we can use the equations of motion and the concept of friction. By calculating the force due to friction and the force due to P, we can add them to get the total force acting on the crate.

To know more about magnitude refer here:

https://brainly.com/question/30827927#

#SPJ11

The third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.

We can start the problem by using conservation of momentum. The momentum before the impact is zero since the plate is at rest, and the momentum after the impact is the sum of the momenta of the three pieces.

Since there are no horizontal forces during the crash, the total momentum is conserved in the x and y directions separately.

Let's call the velocity of the third piece v and assume it moves at an angle θ relative to the x-axis. Then we can write the following equations:

Initial momentum in x-direction = Final momentum in x-direction

0 = 0.32 kg * 2.00 m/s + 0.355 kg * 0 m/s + 0.1 kg * v cos(θ)

Initial momentum in y-direction = Final momentum in y-direction

0 = 0.32 kg * 0 m/s + 0.355 kg * 1.50 m/s + 0.1 kg * v sin(θ)

Simplifying these equations, we get:

0.64 = 0.1 v cos(θ)

0.535 = 0.1 v sin(θ)

We can divide the second equation by the first equation to get:

tan(θ) = 0.535/0.64 = 0.836

Taking the inverse tangent of both sides, we get:

θ = 39.8°

Therefore, the third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.

To know more about momentum refer here

https://brainly.com/question/29220242#

#SPJ11

Answer:

.92 T

Explanation:

This is just a plug-and-chug question.

Here is the formula: B = uni

u = vacuum permeability = 4pi * 10^-7 this is a given constant

n = turns per meter = 1040/ (4.4*10^-2)

i = current = 31 A also given by the problem

so B = .92 T

The unit of the magnetic field is Tesla ("T")

The true velocity of the wind is approximately 43.10 km/h.

To find the true velocity of the wind when a motorcyclist is traveling due north at 50 km/h, and the wind appears to come from the northwest at 60 km/h, we can use vector addition.

Step 1: Break the wind's apparent velocity into its north and west components. Since the wind is coming from the northwest, the north and west components will be equal.

Using the Pythagorean theorem (a² + b² = c²) to find the components:

North component:

a = 60 * cos(45°)

  = 60 * 0.707

   = 42.43 km/h

West component:

b = 60 * sin(45°)

  = 60 * 0.707

  = 42.43 km/h

Step 2: Subtract the motorcyclist's northward velocity from the north component of the wind's apparent velocity:

True north component of the wind:

42.43 - 50 = -7.57 km/h (southward)

Step 3: Combine the true north and west components of the wind's velocity using the Pythagorean theorem:

True wind velocity = √((-7.57)² + (42.43)²)

                               = √(57.36 + 1800.06)

                                = √1857.42

                                ≈ 43.10 km/h

The true velocity of the wind is approximately 43.10 km/h.

To know more about velocity refer here

brainly.com/question/17127206#

#SPJ11

The acceleration due to gravity on the surface of the other planet is approximately 77.98 m/s².

To find the acceleration due to gravity on another planet, we can use the formula:

Weight = Mass × Acceleration due to gravity

On Earth, your weight is given as 742.32 N, and the acceleration due to gravity is 9.80 m/s².

We can rearrange the formula to solve for mass:

Mass = Weight / Acceleration due to gravity

So, on Earth, your mass would be:

Mass on Earth = 742.32 N / 9.80 m/s²

Mass on Earth = 75.63 kg

Now, let's consider the surface of another planet where your weight is given as 5900.91 N.

We'll use the same formula and solve for the acceleration due to gravity on that planet:

5900.91 N = Mass × Acceleration due to gravity on the other planet

Substituting the value of mass we calculated earlier:

5900.91 N = 75.63 kg × Acceleration due to gravity on the other planet

Now, we can solve for the acceleration due to gravity on the other planet:

Acceleration due to gravity on the other planet = 5900.91 N / 75.63 kg

Acceleration due to gravity on the other planet ≈ 77.98 m/s²

To know more about acceleration refer here

https://brainly.com/question/9415862#

#SPJ11

The new process will cause the demand for book printing services to increase, and this will cause the price of book printing services to fall.

The long-run equilibrium will shift to a new equilibrium, where the new cost structure will be reflected in the price of book printing services. The new process will result in lower prices and higher demand for book printing services, leading to an increase in the number of firms in the book printing industry, as well as an increase in the size of the market.

The cost savings due to the new process will be passed on to consumers, resulting in lower prices for books. This will benefit both the book printing companies as well as the consumers.

Know more about equilibrium here

https://brainly.com/question/30807709#

#SPJ11

The frequency of the 5th harmonic of a 5 Hz fundamental is 25 Hz.

To find the frequency of the 5th harmonic (h₅) of a 5 Hz fundamental, you need to multiply the fundamental frequency (f₁) by the harmonic number (n). The formula is:

fₙ = n*f₁

where:

fₙ = frequency of the nth harmonic

f₁ = fundamental frequency

n = harmonic number

In this case, the fundamental frequency (f₁) is 5 Hz and the harmonic number (n) is 5. So, the frequency of the 5th harmonic (h₅) would be:

h₅ = 5 * 5

= 25 Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ4

Charged particles are fundamental to the behavior of electric currents, electric circuits, and resistance. An electric current is the flow of charged particles, typically electrons, through a conductor.

The flow of charged particles generates an electric field that induces a potential difference, or voltage, across the conductor.Electric circuits are constructed by connecting conductors and electrical components, such as resistors, capacitors, and inductors, in a specific configuration. The arrangement of the components determines how the current flows through the circuit.

The flow of current through the circuit depends on the resistance offered by the components in the circuit and the potential difference across the circuit.Resistance is the property of a conductor that opposes the flow of current. The resistance of a conductor is proportional to the number of charged particles in the conductor, the length of the conductor, and the cross-sectional area of the conductor. The resistance can also be affected by the temperature of the conductor and its material properties.

In summary, charged particles are responsible for generating electric currents that flow through electrical circuits. The behavior of the currents is determined by the arrangement of the components in the circuit and the resistance offered by the conductors and components. Resistance is a fundamental property of a conductor that opposes the flow of charged particles and can be affected by various factors.

For more such questions on resistance visit:

https://brainly.com/question/7669692

#SPJ11

Tasting water to identify which cup contains salty water or fresh water may not be reliable, as taste can be subjective and some individuals may have a weaker sense of taste.

Another approach is to use a conductivity meter or a multimeter with conductivity measurement capabilities to test the water in each cup. Salty water has a higher conductivity than fresh water due to the presence of ions, so the cup with higher conductivity would contain the salty water.

A third approach is to use a refractometer to measure the refractive index of the water. Salty water has a higher refractive index than fresh water due to the presence of dissolved salts, so the cup with a higher refractive index would contain the salty water.

In summary, to determine which cup contains salty water and which contains fresh water, one can use taste, a conductivity meter, a multimeter with conductivity measurement capabilities, or a refractometer.

Each of these methods has its own advantages and disadvantages, and the choice of method depends on factors such as the resources available and the specific characteristics of the water being tested.

To know more about salty water refer here:

https://brainly.com/question/29362135?#

#SPJ11

The linear frequency that should be selected for the power supply for the circuit to operate at resonance is 2077.9 Hz.

To find the linear frequency that should be selected for the power supply for the circuit to operate at resonance, we can use the formula for resonant frequency of an RLC circuit:

f = 1 / (2π√(L*C))

where f is the resonant frequency, L is the inductance in henries, and C is the capacitance in farads.

In this case, the capacitance is given as 77.7 μF, which is equivalent to 0.0777 F, and the inductance is given as 28.6 mH, which is equivalent to 0.0286 H. The resistance is given as 630.5 Ω.

Substituting these values into the formula, we get:

f = 1 / (2π√(0.0286 H * 0.0777 F)) = 2077.9 Hz

At this frequency, the inductive reactance and the capacitive reactance cancel out, and the impedance of the circuit is purely resistive, resulting in maximum current flow and minimum power loss.

To learn more about frequency click on,

https://brainly.com/question/16991418

#SPJ4

The period of the electromagnetic wave is 5×10⁻¹⁰ seconds

Period is the time taken for a wave to complete one rotation.

To calculate the period of the wave, we use the formula below.

Formula:

Where:

From the question,

Given:

substitute these values equation 1

Learn  more about period here: https://brainly.com/question/29813582

#SPJ1

The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula

Time = distance / speed

Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.

In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).

Plugging in these values into the formula, we get

Time = 89.5 m / 343 m/s

Time = 0.261 seconds

Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

To know more about time here

https://brainly.com/question/22594054

#SPJ4

Using Newton's second law, F = ma, and the known mass of a proton, 1.673 x [tex]10^{27}[/tex] kg, the initial acceleration of the protons would be approximately 1.38 x [tex]10^{1}[/tex] [tex]m/s^{2}[/tex].

If the protons were not held together by the strong nuclear force, they would experience an electric force due to their positive charges.

According to Coulomb's law, the electric force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.

Therefore, the initial acceleration of the protons would depend on their separation distance and the magnitude of their charges.

Assuming a separation distance of 1 angstrom ([tex]10^{-10}[/tex] m), the electric force between two protons with charges of 1.602 x [tex]10^{-19}[/tex] C would be approximately 2.31 x [tex]10^{-28}[/tex] N.

Using Newton's second law, F = ma, and the known mass of a proton, 1.673 x [tex]10^{-27}[/tex] kg, the initial acceleration of the protons would be approximately 1.38 x [tex]10^{1}[/tex] [tex]m/s^{2}[/tex].

To know more about Newton's second law, refer here:

https://brainly.com/question/13447525#

#SPJ11

Vibration of an object about an equilibrium point is called simple harmonic motion when the restoring force is proportional to the displacement from the equilibrium point and is directed towards the equilibrium point.

This is known as Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position.

Mathematically, this can be expressed as F = -kx, where F is the restoring force, x is the displacement from the equilibrium point, and k is the spring constant, a measure of the stiffness of the spring.

To know more about Hooke's Law refer here

https://brainly.com/question/29126957#

#SPJ11

Horticulture is a field that greatly benefits from specialized technology. This is because the uniformity of crops in horticulture allows for machines that are tightly focused on specific tasks.

These machines are designed to perform specialized functions such as planting, pruning, and harvesting. This specialized equipment ensures that the crops are tended to with precision and care, which results in higher yields and better quality produce.

In contrast, unspecialized machines that can be adapted for multiple tasks may not perform as well in horticulture because they lack the precision and efficiency required for these specialized tasks.

So, in horticulture, specialized technology works well because it allows for precise and efficient handling of crops, which ultimately leads to better yields and higher-quality produce.

To learn more about horticulture, refer below:

https://brainly.com/question/28991945

#SPJ11

If an object is speeding up, the sign of its velocity and acceleration are the same. Option B is correct.

This means that both velocity and acceleration are positive if the object is moving in the positive direction and negative if the object is moving in the negative direction. Acceleration is defined as the rate of change of velocity over time, so if an object is speeding up, its velocity is increasing over time. This increase in velocity can be positive or negative, depending on the direction of motion, but in either case, the acceleration must be in the same direction as the velocity.

Distance and speed are not inversely proportional in this case, as they can both increase or decrease together when an object is speeding up. The magnitude of velocity and acceleration are not always zero, as they can be positive or negative depending on the direction of motion. Option B is correct.

To know more about the Acceleration, here

https://brainly.com/question/30499732

#SPJ4

The magnitude of the force that a magnetic field exerts on a charged particle is given by the equation:

F = qvB sin(theta)

where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and theta is the angle between the velocity vector and the magnetic field vector.

In this case, the proton has a positive charge of +1.6 x 10^-19 C, and it is moving eastward with a velocity of 5.0 km/s. The magnetic field is pointing northward with a strength of 0.20 T.

The angle between the velocity vector and the magnetic field vector is 90 degrees, since the velocity is eastward and the magnetic field is northward.

Plugging these values into the equation, we get:

F = (1.6 x 10^-19 C)(5.0 x 10^3 m/s)(0.20 T) sin(90)

F = 1.6 x 10^-19 N

So the magnitude of the force that the magnetic field exerts on the proton is 1.6 x 10^-19 N.

The direction of the force can be determined using the right-hand rule. If you point your right thumb in the direction of the proton's velocity (eastward), and your fingers in the direction of the magnetic field (northward), then the direction of the force vector is perpendicular to both, pointing downward. Therefore, the direction of the force on the proton is southward.

The cyclist's power output must be equal to 784 N x speed. To climb the same hill at the same speed, the cyclist's power output must be equal to the gravitational force acting on the system (bicycle plus rider) multiplied by the speed at which they are moving.

The gravitational force can be calculated using the formula F = mg, where m is the total mass of the system (80 kg) and g is the acceleration due to gravity (9.8 [tex]m/s^{2}[/tex]). Therefore, the gravitational force acting on the system is 784 N (80 kg x 9.8 [tex]m/s^{2}[/tex]).

Assuming that the speed at which they are moving is constant, the power output required by the cyclist can be calculated using the formula P = F x v, where P is power, F is force, and v is velocity (speed). Therefore, the cyclist's power output must be equal to 784 N x speed.

For example, if the speed is 5 m/s, then the power output required by the cyclist would be 3920 watts (784 N x 5 m/s). However, it's important to note that this is a theoretical calculation and in reality, the power output required may be different due to factors such as air resistance, friction, and the gradient of the hill.

To know more about gravitational force, refer here:

https://brainly.com/question/12528243#

#SPJ11

The ultraviolet catastrophe is good evidence for the (B).wave nature of quanta is correct option.

The ultraviolet catastrophe was a problem in classical physics that arose when attempting to explain the spectral distribution of blackbody radiation. According to classical physics, the energy of radiation should increase without limit as the frequency of the radiation increases. However, experiments showed that this was not the case, and there was a maximum frequency beyond which the energy decreased.

This problem was resolved by Max Planck in 1900, who proposed that energy is quantized and can only exist in discrete packets or "quanta". This led to the development of quantum mechanics, which describes the behavior of matter and energy at the atomic and subatomic level.

The wave-particle duality is a fundamental concept in quantum mechanics that describes the dual nature of particles, which can exhibit both wave-like and particle-like behavior depending on the experimental setup. However, the ultraviolet catastrophe is specifically related to the wave nature of quanta, as it was the wave-like behavior of energy that led to the resolution of the problem.

To know more about wave nature

https://brainly.com/question/27077956

#SPJ4

The marble-jar experiment is a classic demonstration of Newton's Law of Inertia. The experiment consists of a jar filled with marbles and a card covering the jar's opening.

When the jar is inverted quickly, the card falls, and the marbles remain in place.

According to Newton's Law of Inertia, an object at rest will remain at rest, and an object in motion will continue to move in a straight line at a constant velocity unless acted upon by an external force.

In this experiment, the marbles' inertia keeps them in place when the jar is inverted, while the card falls due to the external force of gravity.

This experiment provides a simple and tangible way to understand Newton's Law of Inertia.

To know more about Law of Inertia, refer here:

https://brainly.com/question/1830739#

#SPJ11

This standing wave corresponds to the third harmonic. The fundamental frequency of a guitar string is determined by the length of the string, which in this case is 61 cm.

When a standing wave is produced on the string, the nodes (points where the wave has zero displacement) and antinodes (points of maximum displacement) can be counted to determine the harmonic number. In this case, the number of antinodes is 3, which corresponds to the third harmonic.

The fundamental frequency of the string is determined by the equation f = 1/2L√T/m, where L is the length of the string, T is the tension, and m is the mass per unit length of the string. The third harmonic frequency is three times the fundamental frequency, which is calculated by multiplying the fundamental frequency by 3. Therefore, the third harmonic frequency of the guitar string is three times the fundamental frequency.

In addition, the wavelength of the third harmonic is one-third of the wavelength of the fundamental frequency. This is because the wavelength of a wave is inversely proportional to its frequency. The wavelength of the third harmonic is one-third of the wavelength of the fundamental frequency, and the distance between the antinodes is one-third of the wavelength. Therefore, the standing wave with three antinodes corresponds to the third harmonic.

Know more about displacement here

https://brainly.com/question/11934397#

#SPJ11

As for the Voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.

When the switch is in position 1, the circuit is closed and the battery is connected in series with the inductor and resistor. This means that current flows through the circuit, causing a magnetic field to be generated by the inductor. However, when the switch is suddenly moved to position 2, the circuit is opened and the battery is no longer connected.

After the switch is moved, the current in the circuit begins to decrease due to the inductor's opposition to changes in current. The time it takes for the current to decrease to 36.8% of its original value is known as the time constant, which is calculated by dividing the inductance of the inductor by the resistance of the resistor.

After four time constants, the voltage across the resistor can be calculated using the equation V = V0 * e^(-t/RC), where V0 is the initial voltage, t is the time elapsed, R is the resistance, and C is the capacitance. Plugging in the values given, we get V = 193 * e^(-4/RC) = 3.53 volts.

As for the voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.

To Learn More About Voltage

https://brainly.com/question/1176850

SPJ11

The frequency of the wave produced by oscillating one end of the rope up and down 2.0 times a second is also 2.0 Hz (Hertz).

Frequency is defined as the number of oscillations or cycles that a wave completes in one second. In this case, each oscillation of the rope creates one complete cycle of the wave.

Therefore, if the rope is oscillating 2.0 times per second, it is completing 2.0 cycles of the wave each second, which is equivalent to a frequency of 2.0 Hz.

To know more about oscillations, refer here:

https://brainly.com/question/31472633#

#SPJ11

Answer: yes

Explanation: good luck

Explanation:

To find the average speed of the train, we can use the formula:

average speed = total distance / total time

To find the total distance, we need to calculate the distance traveled during each segment of the trip:

- Distance traveled at 60 km/h for 0.52 hours = 60 km/h * 0.52 h = 31.2 km

- Distance traveled at 30 km/h for 0.24 hours = 30 km/h * 0.24 h = 7.2 km

- Distance traveled at 70 km/h for 0.71 hours = 70 km/h * 0.71 h = 49.7 km

Total distance = 31.2 km + 7.2 km + 49.7 km = 88.1 km

To find the total time, we simply add up the times for each segment:

Total time = 0.52 h + 0.24 h + 0.71 h = 1.47 hours

Now we can use the formula to find the average speed:

average speed = total distance / total time = 88.1 km / 1.47 h ≈ 59.86 km/h

Therefore, the average speed of the train is approximately 59.86 km/h.

(a) Pb = 2π * N * T

(b) Pf = mf * CV

(c) Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%

To determine the brake power, fuel power, and brake thermal efficiency, we can use the following formulas:

(a) Brake Power (Pb):

Pb = 2π * N * T

Where N is the shaft speed in revolutions per minute (rpm) and T is the torque.

(b) Fuel Power (Pf):

Pf = mf * CV

Where mf is the fuel consumption rate in kilograms per second and CV is the calorific value of the fuel in joules per kilogram.

(c) Brake Thermal Efficiency (ηb):

ηb = (Pb / Pf) * 100%

Let's calculate these values using the given information:

(a) Brake Power:

Shaft Speed N = 2600 rev/min

Torque arm R = 16 cm = 0.16 m

The torque (T) can be calculated using the formula:

T = F * R

Brake Power (Pb) = 2π * N * T

(b) Fuel Power:

Fuel consumption mf = 2 g/s = 0.002 kg/s

Calorific Value (CV) = 42 MJ/kg = 42 × [tex]10^6[/tex] J/kg

Fuel Power (Pf) = mf * CV

(c) Brake Thermal Efficiency:

Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%

Let's substitute the given values into the equations and calculate the results.

To know more about brake power refer here

https://brainly.com/question/31456389#

#SPJ11

The smallest cross-sectional area of the copper cable that could be used is approximately 1.54 x 10^-6 square meters.

To calculate the smallest cross-sectional area of the copper cable that could be used, we need to apply Ohm's law and the formula for resistivity.

Ohm's law states that resistance (R) equals resistivity (ρ) multiplied by the length (L) of the conductor, divided by the cross-sectional area (A). In this case, we have:

R = ρ * L / A

We are given the maximum allowable resistance (R) per meter, which is 0.01 ohms/meter, and the resistivity of copper (ρ) as 1.54 x 10^-8 ohm-meter. Since we're considering resistance per meter, the length (L) is 1 meter. We need to find the smallest cross-sectional area (A) that satisfies these conditions.

0.01 ohm = (1.54 x 10^-8 ohm-meter) * 1 meter / A

To find A, we can rearrange the formula:

A = (1.54 x 10^-8 ohm-meter) * 1 meter / 0.01 ohm

A ≈ 1.54 x 10^-6 square meters

So, the smallest cross-sectional area of the copper cable that could be used is approximately 1.54 x 10^-6 square meters.

To learn more about copper, refer below:

https://brainly.com/question/13677872

#SPJ11

A copper wire was measured to be 50.0m long with an uncertainty of 1cm and had a thickness of 1.00mm measured with a micrometer screw gauge. The volume of copper used was [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].

The volume of copper used can be calculated by multiplying the length, cross-sectional area, and density of copper. The length is given as 50.0 m with an uncertainty of [tex]\pm 0.01[/tex]m, and the thickness of the wire is given as 1.00 mm, which is equivalent to 0.001 m.

The cross-sectional area of the wire can be calculated using the formula for the area of a circle, which is πr², where r is the radius of the wire.

The radius of the wire can be calculated by dividing its thickness by 2, giving a value of 0.0005 m. Therefore, the cross-sectional area is [tex]\pi (0.0005)^2 = 7.85 \times 10^{-7} m^2[/tex]. The density of copper is 8.96 g/cm³, which is equivalent to [tex]8.96 \times 10^3 \;kg/m^3[/tex].

Using the formula V = L x A, where V is the volume of copper, L is the length of the wire, and A is the cross-sectional area, we get:

[tex]V = (50.0 \pm 0.01 m) \times (7.85 \times 10^{-7} m^2)[/tex]

[tex]V = 3.93 \times 10^{-5} m^3 \pm 7.85 \times 10^{-9} m^3[/tex]

To account for the uncertainties in the measurements, we used significant figures and error propagation rules. The uncertainty in the volume was calculated using the formula for the multiplication of quantities with uncertainties.

In summary, the volume of copper used was found to be [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].

To know more about volume refer here:

https://brainly.com/question/30347304#

#SPJ11

Answer:Assuming the mass of the spring is not changed, the frequency of the mass-spring system will increase if the length of the spring is cut into one third. This is because the frequency of a mass-spring system is inversely proportional to the square root of the length of the spring. Mathematically, the frequency (f) is given by:

f = 1 / (2π) x √(k/m)

where k is the spring constant and m is the mass of the system. Since the mass of the spring is not changing, if the length of the spring is cut into one third, the square root of the length will become √(1/3) = 0.577. Therefore, the frequency of the system will increase by a factor of 1/0.577, which is approximately 1.73 or √3.

Explanation: