HELP ASAP
This is due in like 1 hour

The two lines which determines that a line is parallel to line QR is point f and point g.

The slope of the line passing through points Q (-1, 2) and R (1, -2) can be found using the slope formula:

=  [tex]slope = \frac{y_2 - y_1}{x_2 - x_1}[/tex]

= [tex]slope = \frac{-2 - 2 }{1- (-1)}[/tex]

= slope = [tex]\frac{-4}{2}[/tex]

= slope = -2

Since lines that are parallel have the same slope, we need to find which pair of points has a slope of -2. Using the slope formula again for each pair of points, we get:

For f:   [tex]slope = \frac{-3 - (-1) }{-2- (-1)}[/tex]  = -2

For g:  [tex]slope = \frac{-1 - 1}{2 - 1}[/tex] = -2

For h:  [tex]slope = \frac{2 - 4}{5 - 1}[/tex]  = -2/4 = -1/2

For j: [tex]slope = \frac{-1 - 1}{-2 - 2}[/tex] = -2/-4 = 1/2

Therefore, only points f and g have a slope of -2 and determine a line parallel to line QR.

To know more about slope

https://brainly.com/question/3605446

#SPJ4

The estimate speed at which the absolute maximum gasoline mileage is obtained is at 60 mph, 65 mph, and 70 mph, we get an estimated maximum fuel economy of around 30 mpg. Trying speeds of 80 mph, 85 mph, and 90 mph, we get an estimated minimum fuel economy of around 15 mpg. The mileage obtained at 10 mph is relatively high, possibly around the maximum value of the fuel economy function.

To estimate the speed at which the absolute maximum gasoline mileage is obtained, we need to find the maximum point of the fuel economy function. Since we know that fuel economy decreases rapidly for speeds over 70 mph, we can assume that the maximum occurs at or below this speed.

We can use trial and error to estimate the maximum speed by plugging in different values of speed and finding the corresponding fuel economy. For example, we can start by trying speeds of 60 mph, 65 mph, and 70 mph. The speed that gives the highest fuel economy is the estimated speed at which the absolute maximum gasoline mileage is obtained.

Similarly, to estimate the speed at which the absolute minimum gasoline mileage is obtained, we need to find the minimum point of the fuel economy function. Since we know that fuel economy decreases rapidly for speeds over 70 mph, we can assume that the minimum occurs at or above this speed.

We can use trial and error to estimate the minimum speed by plugging in different values of speed and finding the corresponding fuel economy. For example, we can start by trying speeds of 80 mph, 85 mph, and 90 mph. The speed that gives the lowest fuel economy is the estimated speed at which the absolute minimum gasoline mileage is obtained.

The question asks for the mileage obtained at 10 mph. Since we don't have a specific fuel economy function, we cannot give an exact answer. However, based on the given information, we can assume that the fuel economy is relatively high at low speeds, and decreases rapidly for speeds over 70 mph.

Therefore, we can estimate that the mileage obtained at 10 mph is relatively high, possibly around the maximum value of the fuel economy function.

To know more about speeds:

https://brainly.com/question/17661499

#SPJ4

The frequency of measurements that lie between -3 and 3 are, given a standard normal distribution is approximately 99.7%. Therefore, the correct option is 2.

If the data has a standard normal distribution, then we know that approximately 68% of the measurements fall within one standard deviation (or unit) of the mean, which is between -1 and 1. Additionally, approximately 95% of the measurements fall within two standard deviations of the mean, which is between -2 and 2. Finally, approximately 99.7% of the measurements fall within three standard deviations of the mean, which is between -3 and 3.

Hence, based on this empirical rule, 99.7% within three standard deviations of the mean in a standard normal distribution. Since -3 and 3 represent three standard deviations from the mean (0), approximately 99.7% of the measurements will fall between these values. Therefore, the correct answer is option 2.

Note: The question is incomplete. The complete question probably is: suppose that you have a set of data with a standard normal distribution given only this information and being as precise as possible how frequent would you say are measurements that lie between -3 and 3. group of answer choices approximately 95 approximately 99.7 at least 75 at least 88.8 at most 100.

Learn more about Normal distribution:

https://brainly.com/question/4079902

#SPJ11

The pieces of wood needed to construct the sandbox is 12542.28 cubic inches

From the question, we have the following parameters that can be used in our computation:

The pentagonal prism

The pieces of wood needed to construct the sandbox is the volume, and this is calculated as

Volume = 1/4√[5(5+2√5)]a²h

Where

a = side length = 27 inches

h = height = 10 inches

Substitute the known values in the above equation, so, we have the following representation

Volume = 1/4 * √[5(5+2√5)] * 27² * 10

Evaluate

Volume = 12542.28

Hence, the pieces of wood needed to construct the sandbox is 12542.28 cubic inches

Read more about surface area at

https://brainly.com/question/26403859

#SPJ1

The probability that only three of 8 people getting these catalogs will order something is  0.0496

Ready to utilize binomial dissemination to unravel this issue. Let X be the number of individuals out of 8 who arrange something from the mail-order catalog.

At that point, X takes after binomial dissemination with parameters n = 8 and p = 0.6. We need to discover the likelihood that precisely 3 individuals out of 8 arrange something, i.e., P(X = 3).

Utilizing the equation for the binomial likelihood mass work, we have:

P(X = 3) = (8 select 3) * [tex](0.6)^3[/tex] * [tex](1 - 0.6)^(8-3)[/tex]

P(X = 3)= (56) * (0.216) * (0.4096) 

 P(X = 3)= 0.0496

Subsequently, the likelihood that precisely three out of 8 individuals getting mail-order catalogs will arrange something is around 0.0496 or 0.050 adjusted to three decimal places.

To know more about probability refer to this :

https://brainly.com/question/24756209

#SPJ4

The absolute maximum value of the function on the interval is 18, which occurs at x = 3, and the absolute minimum value is -25.76, which occurs at x = 2.817.

To find the absolute maxima and minima of the function f(x) = x⁴ - 4x³ + x² on the interval (-1,3], we need to first find the critical points and endpoints of the interval.

Taking the derivative of the function, we get:

f'(x) = 4x³ - 12x² + 2x

Setting this equal to zero, we get:

4x³ - 12x² + 2x = 0

Factoring out 2x, we get:

2x(2x² - 6x + 1) = 0

Using the quadratic formula, we can solve for the roots of the quadratic factor:

x = (6 ± √32)/4 = 0.183 and 2.817

So the critical points are x = 0, 0.183, and 2.817.

Now we need to evaluate the function at the critical points and the endpoints of the interval:

f(-1) = 6

f(3) = 18

f(0) = 0

f(0.183) ≈ -0.76

f(2.817) ≈ -25.76

So the absolute maximum value of the function on the interval is 18, which occurs at x = 3, and the absolute minimum value is -25.76, which occurs at x = 2.817.

To learn more about maximum value here:

brainly.com/question/14316282#

#SPJ11

In this example, there are 110 characters remaining in the message.

As stated in the question, the maximum size of a text message is 160 characters. This means that a message cannot exceed 160 characters, including spaces and punctuation marks. If we want to find out how many characters remain in a message, we need to subtract the number of characters in the message from the maximum allowed characters.

For example, if a message contains 50 characters including spaces, we can calculate the remaining characters as follows:

Maximum size of message = 160

Number of characters in message = 50

Remaining characters = Maximum size of message - Number of characters in message

Remaining characters = 160 - 50

Remaining characters = 110

Therefore, in this example, there are 110 characters remaining in the message.

To learn more about subtract visit:

https://brainly.com/question/24600056

#SPJ11

The prediction is that there were about 260 principals in attendance at the conference.

How to make a prediction about the number of principals?

To make a prediction about the number of principals in attendance at the conference, we need to assume that the ratio of teachers to principals in the exhibit room is representative of the ratio of teachers to principals in the entire conference.

The ratio of teachers to principals in the exhibit room is 18:52 or simplified to 9:26. If we assume that this ratio is representative of the entire conference, then we can set up a proportion:

9/26 = x/750

where x is the number of principals in attendance.

Solving for x, we get:

x = 750×(9/26) = 260.54

Rounding to the nearest whole number, we get that the predicted number of principals in attendance at the conference is 261.

Therefore, the prediction is that there were about 260 principals in attendance at the conference. Answer choice (B) is the closest to this prediction.

Learn more about pricipal here,

https://brainly.com/question/11340564

#SPJ1

The value of the given integral S2 1 (4+u²/u³)du is 1/4 + ln|2| + C, where C = C1 + C2 is the constant of integration .To assess the provided integral:

∫(4+u²/u³)du from 1 to 2,

This is how we can divide it into two integrals:

∫4/u³du + ∫u²/u³du from 1 to 2

This is how we can divide it into two integrals:, which states that ∫uⁿdu = (1/(n+1))u^(n+1) + C, where C is the constant of integration.

Using this rule, we get:

∫4/u³du = (4/-2u²) + C1 = -2/u² + C1

The second integral can also be evaluated using the power rule of integration, but we need to simplify the integrand first by canceling out the common factor of u² in the numerator and denominator:

∫u²/u³du = ∫1/udu

Using the power rule, we get:

∫1/udu = ln|u| + C2

where C2 is the constant of integration.

Substituting the limits of integration (1 and 2), we get:

S2 1 (4+u²/u³)du = [(-2/u² + C1) + (ln|u| + C2)] from 1 to 2

= [(-2/2² + C1) + (ln|2| + C2)] - [(-2/1² + C1) + (ln|1| + C2)]

= [-1/4 + ln|2| + C1 - (-2 + ln|1| + C2)]

= 1/4 + ln|2| + C1 + C2

where C1 and C2 are constants of integration.

Therefore, the value of the given integral is 1/4 + ln|2| + C, where C = C1 + C2 is the constant of integration.

Learn more about integration:

https://brainly.com/question/30900582

#SPJ4

Yes, the Ellipse x²/3² + y²/6² = 1 can be drawn with parameter x(t) = 3 cos t and y (t)= 2 sin t.

We have,

Equation of Ellipse: x²/3² + y²/6² = 1

As, x = 2 cos θ and y = 3 sin θ

Using Pythagoras theorem

cos² x + sin² x =1

So, if x/3 = cos θ and y/2= sin θ

Thus, the parameter are x(t) = 3 cos t and y (t)= 2 sin t

Learn more about Equation of Ellipse here:

https://brainly.com/question/29205228

#SPJ4

The correction factors listed in SI Appendix 2 Table AS(1) are specifically applicable to devices intended for short circuit protection, except for sem-enclosed devices complying with BS 3096, and when operating with rubber-insulated cables when providing overload protection.

The correction factors for ambient temperature, as listed in SI Appendix 2 Table AS(1), are applicable when the stored overcurrent protective device is designed to offer short circuit protection only. These correction factors also apply to devices intended for overload protection, except for sem-enclosed devices complying with BS 3096, and when operating with rubber-insulated cables.

The correction factors listed in SI Appendix 2 Table AS(1) are meant to be applied to ambient temperature when determining the appropriate sizing of overcurrent protective devices.

These correction factors are only applicable for devices that are designed to provide short circuit protection, which means they are not meant to protect against overload conditions.

However, if the protective device is a sem-enclosed device that complies with BS 3096, then the correction factors listed in the table do not apply.

Additionally, the correction factors listed in the table also apply when the devices are intended to provide overload protection, but only when they are operating with rubber-insulated cables.

Therefore, the correction factors listed in SI Appendix 2 Table AS(1) are specifically applicable to devices intended for short circuit protection, except for sem-enclosed devices complying with BS 3096, and when operating with rubber-insulated cables when providing overload protection.

To learn more about rubber-insulated here:

brainly.com/question/28198740#

#SPJ11

The value of function y(e²) = 57.

To find y(e²) given y' = 19/x and y(e) = 38, first, integrate y' with respect to x to find y(x).

1. Integrate y' = 19/x:
∫(19/x) dx = 19∫(1/x) dx = 19(ln|x|) + C

2. Use the initial condition y(e) = 38 to find C:
38 = 19(ln|e|) + C
38 = 19(1) + C
C = 38 - 19
C = 19

3. Substitute C into the equation for y(x):
y(x) = 19(ln|x|) + 19

4. Find y(e²):
y(e²) = 19(ln|e²|) + 19
y(e²) = 19(2) + 19
y(e²) = 38 + 19
y(e²) = 57

The explanation involves integrating y' with respect to x, using the initial condition to find the constant of integration, and then evaluating y(x) at x = e².

To know more about integrate click on below link:

https://brainly.com/question/30217024#

#SPJ11

For independent events, P(B | A) = P(B). For independent events, the occurrence of event A does not affect the probability of event B occurring.

Therefore, the conditional probability of event B given event A, denoted as P(B | A), is equal to the probability of event B, denoted as P(B). This can be mathematically expressed as:

P(B | A) = P(B)

In other words, if A and B are independent events, knowing that event A has occurred does not provide any additional information about the probability of event B occurring. The probability of event B occurring remains the same whether or not event A has occurred.

This property of independence is a fundamental concept in probability theory and is used in many real-world applications, such as in calculating the likelihood of multiple events occurring together, predicting the outcomes of games and sports, and analyzing financial risks.

To learn more about events click on,

https://brainly.com/question/13767705

#SPJ4

The smallest possible value for the sum of the 81 draws is 411.

To find the smallest possible value of the sum of the 81 draws, we need to minimize the value of each individual ticket. Since we have six tickets with values of 2, 9, 5, 6, 4, and 4, we can assume that each ticket will be drawn 13 or 14 times (since 13 x 6 = 78 and 14 x 6 = 84).

To minimize the sum of the draws, we want to have as many tickets with a value of 2 and 4 as possible. Let's assume that we have 14 draws for each ticket except for the 9 (which we will assume is drawn 13 times).

So, our calculation would be:

(2 x 14) + (9 x 13) + (5 x 14) + (6 x 14) + (4 x 14) + (4 x 14) = 28 + 117 + 70 + 84 + 56 + 56 = 411

Know more about sum here:

https://brainly.com/question/5982761

#SPJ11

The cost of producing x units of a product is is approximately $19.79.

(A) The average cost function is obtained by dividing the total cost by the number of units produced:

c(x) = C(x)/x = (140 + 25x - 150 ln(x))/x

(B) To find the minimum average cost, we need to take the derivative of the average cost function and set it equal to zero:

c'(x) = (25 - 150/x - 140/[tex]x^2[/tex]) / x

Setting c'(x) equal to zero and solving for x, we get:

25 - 150/x - 140/[tex]x^2[/tex] = 0

Simplifying and solving for x, we get:

x = 10

To confirm that this is a minimum, we need to check the second derivative:

c''(x) = (150/[tex]x^2[/tex] - 280/[tex]x^3[/tex]) / x

Evaluating c''(10), we get:

c''(10) = 5/4

Since c''(10) is positive, we can conclude that x = 10 is a minimum for the average cost function.

Using a graphing utility, we can graph the average cost function and confirm that the minimum occurs at x = 10.

We can see from the graph that the minimum occurs at x = 10, and the minimum value is approximately $19.79 (rounded to two decimal places).

For similar question on cost of producing:

brainly.com/question/30995367

#SPJ11

The probability that the number of heads will not differ from 300 by more than 12 when a fair coin is tossed 600 times.

To find the probability that the number of heads will not differ from 300 by more than 12 when a fair coin is tossed 600 times, we'll use the following terms:

binomial distribution, probability mass function (PMF), and cumulative distribution function (CDF).
Identify the parameters for the binomial distribution:
- Number of trials (n) = 600
- Probability of success (p) = 0.5 (since it's a fair coin)
Define the range of the number of heads:
- Lower limit: 300 - 12 = 288
- Upper limit: 300 + 12 = 312
Calculate the probability using the cumulative distribution function (CDF) and probability mass function (PMF) of the binomial distribution:
P(288 <= X <= 312) = P(X <= 312) - P(X <= 287)
Where X is the number of heads.
You can use a binomial calculator or statistical software to find the CDF values for X <= 312 and X <= 287.
Subtract the CDF values to get the final probability:
P(288 <= X <= 312) = CDF(X <= 312) - CDF(X <= 287)
Once you've calculated the difference between the two CDF values, you'll have the probability that the number of heads will not differ from 300 by more than 12 when a fair coin is tossed 600 times.

For similar question on probability.

https://brainly.com/question/28832086

#SPJ11

To find cos'(x), we can start by using the definition of the hyperbolic cosine function, cosh(x) = (e^x + e^(-x))/2.

Let y = cosh(x). Then we have:
y = (e^x + e^(-x))/2
2y = e^x + e^(-x)
Multiplying both sides by e^x, we get:
2ye^x = e^(2x) + 1
e^(2x) - 2ye^x + 1 = 0
This is a quadratic equation in e^x, so we can use the quadratic formula to solve for e^x:
e^x = (2y ± sqrt(4y^2 - 4))/2
e^x = y ± sqrt(y^2 - 1)
Since e^x is always positive, we choose the positive square root:
e^x = y + sqrt(y^2 - 1)
Taking the natural logarithm of both sides, we get:
x = ln(y + sqrt(y^2 - 1))
Now we can find cos'(x) by differentiating both sides with respect to x:
cos'(x) = d/dx ln(y + sqrt(y^2 - 1))
Using the chain rule, we have:
cos'(x) = 1/(y + sqrt(y^2 - 1)) * (d/dx y + sqrt(y^2 - 1))
Differentiating y = cosh(x) with respect to x, we get:
dy/dx = sinh(x) = (e^x - e^(-x))/2
Substituting back in y = cosh(x), we have:
dy/dx = sinh(ln(y + sqrt(y^2 - 1))) = (y + sqrt(y^2 - 1))/2
Now we can substitute both expressions back into cos'(x):
cos'(x) = 1/(y + sqrt(y^2 - 1)) * (y + sqrt(y^2 - 1))/2
Simplifying, we get:
cos'(x) = 1/2sqrt(y^2 - 1)
Substituting back in y = cosh(x), we get the final answer:
cos'(x) = 1/2sqrt(cosh^2(x) - 1)

Learn more about hyperbolic cosine function here:

https://brainly.com/question/15381243

#SPJ11

A data packet consists of 10,000 bits, where each bit is a 0 or a 1 with equal probability.The probability of having at least 5200 ones in a data packet of 10,000 bits with equal probability is approximately 3.17 × 10^(-5) using the Q-function

To estimate the probability of having at least 5200 ones in a data packet consisting of 10,000 bits with equal probability, we will use the Q-function.

Here are the steps to follow:

Step 1:

Determine the mean and standard deviation of the binomial distribution.
Since there are 10,000 bits and each bit has an equal probability of being 0 or 1, the mean (μ) is:
μ = n * p = 10,000 * 0.5 = 5,000

The standard deviation (σ) is:
σ = sqrt(n * p * (1-p)) = sqrt(10,000 * 0.5 * 0.5) = sqrt(2,500) = 50

Step 2: Calculate the normalized distance from the mean (z-score) for 5200 ones.
z = (x - μ) / σ

= (5200 - 5000) / 50 = 200 / 50 = 4

Step 3: Estimate the probability using the Q-function.
The probability of having at least 5200 ones is the same as the probability of having a z-score greater than or equal to 4. So, we will use the Q-function to find this probability:

P(at least 5200 ones) = Q(z) = Q(4)

You can either use a Q-function table or calculator to find the value of Q(4). Typically, Q(4) is approximately 3.17 × 10^(-5).

In conclusion, the probability of having at least 5200 ones in a data packet of 10,000 bits with equal probability is approximately 3.17 × 10^(-5) using the Q-function.

To know more about Probability:

https://brainly.com/question/30034780

#SPJ11

Sheila has $10.52 left in her savings account after making three withdrawals totaling $51.89.

Sheila had a balance of $62.41 in her savings account. This means that the total amount of money in her account was $62.41.

Then, she made three withdrawals from her account. The first withdrawal was for $8.95, the second withdrawal was for $3.17, and the third withdrawal was for $39.77.

To determine how much money she had left in her account, we need to subtract the total amount of money she withdrew from her original balance.

To do this, we can use the following formula:

Remaining balance = Original balance - Total amount withdrawn

Plugging in the given values, we get:

Remaining balance = $62.41 - ($8.95 + $3.17 + $39.77)

Simplifying the equation by adding the values inside the parentheses, we get:

Remaining balance = $62.41 - $51.89

Finally, we can solve for the remaining balance:

Remaining balance = $10.52

To know more about account here

https://brainly.com/question/22917325

#SPJ4

Part(a),

The given statement, ''If Σ an converges and 0 < an ≤ bn for all n ≥ 1'' is false.

Part(b),

The given statement, ''If ΣIanI converges then Σan converges'' is false.

The harmonic series is a divergent infinite series, which is defined as the sum of the reciprocals of the positive integers. That is,

[tex]1 + \dfrac{1}{2} + \dfrac{1}{3} + \dfrac{1}{4} + \dfrac{1}{5} + ...[/tex]

(a) The statement is false. A counterexample is given by the harmonic series and the series defined by [tex]b_n=\dfrac{1}{n^2}[/tex]. The harmonic series diverges, but for all n≥1, we have that [tex]\dfrac{1}{n^2} \leq \dfrac{1}{n}[/tex], so the series defined by  [tex]b_n=\dfrac{1}{n^2}[/tex] converges.

(b) The statement is also false. A counterexample is given by the alternating harmonic series and the series defined by [tex]a_n= \dfrac{(-1)^n}{n}[/tex]. The alternating harmonic series converges, but the series defined by [tex]a_n= \dfrac{(-1)^n}{n}[/tex] does not converge absolutely, hence it does not converge.

To know more about harmonic series follow

https://brainly.com/question/31416089

#SPJ11

For example, let a_n = (-1)^n/n and Ia_nI = 1/n, and let b_n = 1/n^2. Then, Σ b_n converges by the p-test, but Σ a_n diverges by the alternating series test. However, Σ Ia_nI converges by the p-test.

(a) Incorrect

(b) Incorrect

(a) is a version of the comparison test, which states that if 0 ≤ an ≤ bn for all n and Σ bn converges, then Σ an also converges. However, the assertion given in (a) has the inequality pointing in the wrong direction, so it is false. For example, let a_n = 1/n^2 and b_n = 1/n. Then, Σ a_n converges by the p-test, but Σ b_n diverges by the harmonic series. However, 0 < a_n ≤ b_n for all n ≥ 1.

(b) is also false. The statement given in (b) is a common misconception of the comparison test. While it is true that if 0 ≤ |an| ≤ bn for all n and Σ bn converges, then Σ an also converges, the absolute values in the inequality are necessary. For example, let a_n = (-1)^n/n and Ia_nI = 1/n, and let b_n = 1/n^2. Then, Σ b_n converges by the p-test, but Σ a_n diverges by the alternating series test. However, Σ Ia_nI converges by the p-test.

To learn more about misconception visit:

https://brainly.com/question/14160123

#SPJ11

To describe the probability distribution of the rainfall for California and New York, we would need to use the appropriate statistical table or technology. Specifically, we would need to calculate the mean and standard deviation of the sample data, and then use this information to determine the shape and spread of the distribution. We could use tools like Excel or statistical software to do this, or we could consult a statistical table for the relevant distributions (such as the normal distribution). Once we have this information, we can describe the probability distribution in terms of its shape (e.g. normal, skewed) and spread (e.g. narrow, wide).

(a) For the state of California, the probability distribution can be described as follows:
- Mean (µ) = 22 inches
- Standard deviation (σ) = 4 inches
- Sample size (n) = 31 years

For the state of New York, the probability distribution can be described as follows:
- Mean (µ) = 42 inches
- Standard deviation (σ) = 4 inches
- Sample size (n) = 47 years

In order to compare or analyze these probability distributions, you may need to use the appropriate appendix table (such as a Z-table) or technology (such as statistical software or a calculator with statistical functions) to calculate probabilities, z-scores, or other relevant statistics.

Learn more about Normal Distribution here: brainly.in/question/48514524

#SPJ11

The company should use a warranty period that is equal to 67,467.5 miles.

To determine the warranty period, we need to find the value of the tire life that corresponds to 95% of the tires. We can use the standard normal distribution table to find the value of the z-score that corresponds to the 95th percentile. This value is approximately 1.645.

Now, we can use the formula for the normal distribution to find the tire life value that corresponds to the z-score of 1.645. This formula is:

X = μ + zσ

Where X is the tire life value, μ is the mean of the distribution (65,000 miles), z is the z-score (1.645), and σ is the standard deviation of the distribution (1500 miles).

Plugging in the values, we get:

X = 65,000 + 1.645(1500)

X = 67,467.5

This means that 95% of the tires will have a life of at least 67,467.5 miles.

To know more about distribution here

https://brainly.com/question/29509087

#SPJ4

There are 907,200 ways to arrange the letters of "hudsonicus" that begin with vowels or end with consonants.

The word "hudsonicus" has 10 letters, including 3 vowels (u, o, i) and 7 consonants (h, d, s, n, c). To find the number of ways to arrange the letters such that the word begins with a vowel or ends with a consonant, we can use the principle of inclusion-exclusion.

Let A be the set of arrangements that begin with a vowel, and let B be the set of arrangements that end with a consonant. We want to find the size of the set A ∪ B, which is the set of arrangements that satisfy either condition.

To find the size of A, we can fix the first letter to be a vowel (either "u", "o", or "i") and arrange the remaining 9 letters in any order. There are 3 choices for the first letter and 9!/(2!2!2!) ways to arrange the remaining letters (dividing by 2!2!2! to account for the repeated letters "d", "s", and "u"). Therefore, the size of A is 3 * 9!/(2!2!2!).

To find the size of B, we can fix the last letter to be a consonant (any letter except "u", "o", or "i") and arrange the remaining 9 letters in any order. There are 7 choices for the last letter and 9!/(2!2!2!) ways to arrange the remaining letters. Therefore, the size of B is 7 * 9!/(2!2!2!).

However, we have counted the arrangements that both begin with a vowel and end with a consonant twice, so we need to subtract the size of the set A ∩ B from the sum of the sizes of A and B. To find the size of A ∩ B, we can fix the first and last letters to satisfy both conditions and arrange the remaining 8 letters in any order. There are 3 choices for the first letter, 7 choices for the last letter, and 8!/(2!2!2!) ways to arrange the remaining letters. Therefore, the size of A ∩ B is 3 * 7 * 8!/(2!2!2!).

Using the principle of inclusion-exclusion, the number of ways to arrange the letters of "hudsonicus" such that the word begins with a vowel or ends with a consonant is:

|A ∪ B| = |A| + |B| - |A ∩ B|

= 3 * 9!/(2!2!2!) + 7 * 9!/(2!2!2!) - 3 * 7 * 8!/(2!2!2!)

= 907200

Therefore, there are 907,200 ways to arrange the letters of "hudsonicus" that begin with vowels or end with consonants.

To learn more about number of ways visit:

https://brainly.com/question/29110744

#SPJ11

Person B's risk premium for avoiding the new gamble is $35.18.

Given that Person A and Person B have CARA (Constant Absolute Risk Aversion) utility function, we can use the following formula to compute their absolute risk aversion coefficients:

ARA = - u''(w) / u'(w)

where:

w is wealth

u'(w) is the first derivative of the utility function with respect to wealth

u''(w) is the second derivative of the utility function with respect to wealth

We can assume that A and B have a utility function of the form:

u(w) = - e^(-aw)

where a is the absolute risk aversion coefficient.

a) To compute the absolute risk aversion coefficient for Person A, we can use the formula:

ARA = - u''(w) / u'(w) = - (-aw^2 e^(-aw)) / (-ae^(-aw)) = w

Since A is willing to pay $2 to avoid the fair gamble, we can assume that his wealth is $102 ($100 to be won or lost and $2 to pay). Therefore, the absolute risk aversion coefficient for Person A is approximately:

a = ARA / $102 = 1/51

To compute the absolute risk aversion coefficient for Person B, we can use the same formula:

ARA = - u''(w) / u'(w) = - (-aw^2 e^(-aw)) / (-ae^(-aw)) = w

Since B is willing to pay $10 to avoid the fair gamble, we can assume that his wealth is $110 ($100 to be won or lost and $10 to pay). Therefore, the absolute risk aversion coefficient for Person B is approximately:

a = ARA / $110 = 1/11

b) To compute the risk premium for avoiding the new gamble (win $500 with 50% chance and lose $500 with 50% chance), we can use the following formula:

RP = (1/a) * ln(1 - (1/2) * (1 - e^(-a * (500 - w) / 10000)))

where:

w is the amount to be paid to avoid the new gamble

a is the absolute risk aversion coefficient

For Person A, we have:

RP = (1/a) * ln(1 - (1/2) * (1 - e^(-a * (500 - 102) / 10000)))

= (1/(1/51)) * ln(1 - (1/2) * (1 - e^(-1/51 * 398 / 10000)))

= $0.85 (rounded to two decimal places)

Therefore, Person A's risk premium for avoiding the new gamble is $0.85.

For Person B, we have:

RP = (1/a) * ln(1 - (1/2) * (1 - e^(-a * (500 - 110) / 10000)))

= (1/(1/11)) * ln(1 - (1/2) * (1 - e^(-1/11 * 390 / 10000)))

= $35.18 (rounded to two decimal places)

Therefore, Person B's risk premium for avoiding the new gamble is $35.18.

To learn more about premium visit:

https://brainly.com/question/9834518

#SPJ11

The solution is:

a)z1.z2=cos (5pi/2) + i  sin(5pi/2)

b)z1.z2=6[cos 80 + isin 80]

c)z1/z2= 3[cos 3pi + i sin 3pi]

d)z1/z2 = (cos 7pi/12 + i sin 7pi/12 )

Given that,

a) z1=2(cos pi/6 + i sinpi/6) , z2=3(cospi/4 + i sin pi/4)

z1.z2=[2(cos pi/6 +i sinpi/6)] . [3(cospi/4 + i sin pi/4)]  

z1.z2=6[cos(pi/6 + pi/4) + i sin(pi/6 + pi/4)]

z1.z2=6[cos (5pi/12) + i sin(5pi/12)]

z1.z2=cos (5pi/2) + i  sin(5pi/2)

Hence the answer is this.

b)z1= 2/3 (cos60° + i sin60°) , z2=9 (cos20° + i sin20°)

z1.z2=2/3 *9[(cos 60 +i sin60)+(cos20 + i sin20)]

z1.z2=18/3[cos(60+20) + i sin(60+20)]

z1.z2=6[cos 80 + isin 80]

Hence the answer is this

c) z1 = 12 (cos pi/3 -+i sin pi/3) , z2 = 3 (cos 5pi/6 + i sin 5pi/6)

z1/z2= (12/3)[(cos pi/3 + i sin pi/3) - (cos 5pi/6 + i sin 5pi/6)]

z1/z2= 6[cos(pi/3 - 5pi/6) + i sin(pi/3 - 5pi/6)]

z1/z2= 6[cos(2pi- pi/2) + i sin(2pi-pi/2)]

z1/z2= 6[cos 3pi/2 + i sin 3pi/2]

z1/z2= 3[cos 3pi + i sin 3pi]

Hence the answer is this

d) z1 = cos 2pi/3 + i sin 2pi/3  and z2 = 2 (cos pi/12 + i sin pi/12)  

z1/z2 = (1/2)(cos(2pi/3-pi/12) + i sin (2pi/3 -pi/12))

z1/z2 = (cos 7pi/12 + i sin 7pi/12 )

Hence the answer is this

To learn more about trigonometric relations click :

brainly.com/question/14450671

#SPJ1

Answer:

2

Step-by-step explanation:

15 - 9 = 6

12 / 6 = 2

Yes, both ratios are equivalent. 18:12 reduced to its lowest form gives 3:2

Ratio can simply be described as the comparison between two numbers

From the question, we are asked to calculate if 18:12 and 3:2 are equivalent

The first step is to reduce 18:12 to it's lowest form

= 18/12

Divide both numbers by 6 to reduce to it's lowest form

3/2

Hence 18:12 is equivalent to 3:2

Read more on ratio here
https://brainly.com/question/26900641

#SPJ1

Answer:

11 and -1

Step-by-step explanation:

Represent the numbers by x and y. Then x*y = 11 and x + y = -12.

Let's eliminate y temporarily. Solving the first equation for y yields 11/x. Substituting this 11/x for y in the second equation yields x + 11/x = -12.

Let's clear out the fractions by multiplying all of these terms by x:

x^2 + 11 = -12x, or x^2 + 12x + 11 = 0.

This factors to (x + 11)(x + 1) = 0, so the roots are -11 and -1.

Note that -11 and -1 multiply to +11 and that -11 and -1 add to -12.

Answer:

Step-by-step explanation:

x^2 - 12x + 11 = 0

factorize

(x - 11 ) × (x - 1)

then

x^2 - 12x + 11 = (x - 11 ) × (x - 1)

so your answer is

-11 and -1

------------------------------

-11 × -1 = 11

-11 + -1 = -12

the graph of the function 2^x is plotted below and attached.

What is a function?

Every input has exactly one output, which is a special form of relation known as a function. To put it another way, for every input value, the function returns exactly one value. The fact that one is transferred to two different values makes the graph above a relation rather than a function. If one was instead mapped to a single value, the aforementioned relation would change into a function. There is also the possibility of input and output values being equal.

The function f(x)=2^x is an exponential function where the base is 2 and the exponent is x. This means that as x increases, the output of the function (f(x)) increases exponentially.

Exponential functions are used in many areas of science and technology, including finance, biology, and computer science. They are also used to model phenomena such as population growth, radioactive decay, and compound interest.

Hence the graph of the function 2^x is plotted below and attached.

Learn more about function, by the following link.

https://brainly.com/question/25638609

#SPJ1