Answer:
Heavier noble gases are able to form compounds with other elements under specific conditions because their valence electrons are farther from the nucleus.
Explanation:
The name of noble or inert gas is due to the lack of reactivity with other elements. This is due to its electronic configuration, because its outermost shell or valence shell is always complete, without the need to share, give or receive electrons forming bonds. That is, its outer layer is so stable that the element tends not to react with others except in very specific cases.
These exceptions generally involve the heavier noble gases, such as xenon or radon, capable of forming compounds with fluorine and oxygen. This is because the heavier noble gases have more electron shells than the lighter ones. This characteristic causes the outermost electrons to experience a "shielding" effect due to the action of the inner electrons, and they can then be ionized more easily, since the attraction they receive from the positive charges of the nucleus is weaker. That makes the ionization energy low enough to form stable compounds with more electronegative elements, such as fluorine and oxygen.
Heavier noble gases are able to form compounds with other elements under specific conditions because their valence electrons are farther from the nucleus.
How much 2.0 M NaCl solution would you need to make 250 mL of 0.15 M NaCl solution?
Answer:
18.75 mL
Explanation:
(M1)(V1)=(M2)(V2)
(2.0 M)(V1)=(0.15 M)(250 mL)
(2.0)(V1)=37.5
Divide 2.0 on both sides
V1=18.75 mL
how many molecules are there in 1.5 mol of methane
Answer: A mole of something means that there are 6.02 X 10^23 of that something. So, a mole of methane molecules is 6.02 X 10^23 methane molecules. So, 1.5 moles of methane will contain 1.5*(6.02 X 10^23) = 9.0 X 10^23 methane molecules
Explanation:
Why is sterilising the water rarely used in treating the sewage water?
Answer:
Sterilizing the water rarely used in treating the sewage water is described below in details.
Explanation:
Sterilization is the application of a chemical or physical system to eradicate all microorganisms, concluding comprehensive amounts of bacterial content. Heat treatment is the most relevant approach for the sterilization of waste-water that accommodates large levels of masses. well now sterilizing the water is un-usually practiced in managing the sewage water.
Pliss help
A)random change
B)natural selection
C) artificial selection
D)inbreeding
And why
Answer: I believe it is artificial selection (not certain though)
Explanation: modern day dogs have been bread an domesticated to be used by humans in ways we see fit.
Use the following chemical equation to answer the question. 4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, what is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas?
A) 9.96 grams of K2O
B) 14.5 grams of K2O
C) 28.9 grams of K2O
D) 57.8 grams of K2O
Answer:14.5 grams of K2O
Explanation:
4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, 14.5 grams of K2O is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas. Therefore, option B is correct.
What is theoretical yield ?The yield of a reaction is used to represent how much of a product is produced from that reaction. The theoretical yield is the quantity of product that stoichiometry predicts will be produced, whereas the actual yield is the amount that is actually produced.
Divide the ratio by the limiting reactant's molecular weight. The answer is the theoretical yield of the desired product in moles.
It is useful to know how much product will be created with specific reactant amounts before carrying out chemical reactions. The theoretical yield is what is meant by this. This method can be applied to determine the theoretical yield of a chemical reaction.
Thus, option B is correct.
To learn more about theoretical yield, follow the link;
https://brainly.com/question/175584
#SPJ2
What is true of experimental designs that are used in scientific research? The designs use the same steps in every kind of research. The designs follow a general method that is familiar to all scientists. The designs ensure that the experimental data supports the hypothesis. The designs are kept secret so that others must do their own experiments.. The answer is B.) "The designs follow a general method that is familiar to all scientists."
Answer:
The designs ensure that the experimental.
Explanation:
Scientific research refers to the-fact finding inquiry to answer the questions related to natural processes. A hypothesis is a situation or an assumption that needs to be proved by applying scientific produces. Experimental design refers to the methodology, which is applied to conduct research.
The designs ensure that the experimental data support the hypothesis is the true statement regarding experimental designs that are used in scientific research because an experimental design should be concerned with the fact that it is relevant or appropriate to prove a hypothesis.
Answer:
its c. the designs follow a general method that is familiar to all scientists
Explanation:
why are gases able to spread out and fill whatever container they are in
Answer:
gases are able to spread out and fill whatever container they are in because they do not have. a definite shape their molecules are not tightly packed so they can cover over a vast area like our atmosphere.
What are the elements in group two called
Answer: Alkaline-earth metal, any of the six chemical elements that comprise Group 2 (IIa) of the periodic table. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). Hopefully i helped
Explanation:
Answer: Alkaline-earth metal
Explanation:
Do number 5 vote you brainlest thanks
Answer:
DNA
Explanation:
because genetics come from DNA
what is the answer to this
Answer:
Explanation:
i may be wrong but i think its b
Answer:
B Ndaira is right for real
Question 8
Which one of the following salts does not contain water of crystallisation?
Answer:
pb
Explanation:
dosn't contain water of crystallization
explain why a nanowire can be longer than 3000nm but still be considered a metallic nanomaterial
Answer:
A nanowire is a nanostructure, with the diameter of the order of a nanometre (10−9 meters). It can also be defined as the ratio of the length to width being greater than 1000. Alternatively, nanowires can be defined as structures that have a thickness or diameter constrained to tens of nanometers or less and an unconstrained length. At these scales, quantum mechanical effects are important—which coined the term "quantum wires". Many different types of nanowires exist, including superconducting (e.g. YBCO[1]), metallic (e.g. Ni, Pt, Au, Ag), semiconducting (e.g. silicon nanowires (SiNWs), InP, GaN) and insulating (e.g. SiO2, TiO2). Molecular nanowires are composed of repeating molecular units either organic (e.g. DNA) or inorganic (e.g. Mo6S9−xIx).
Explanation:
Hope it helps
What is the formula for triboron silicide?
Answer:
B₃Si
Explanation:
Let's take break it down. From triboron silicide;
Tri - Three
Triboron - Three boron atoms
Silicide - Silicon (with an -ide suffix)
The formular is given as;
B₃Si
Which of the following is the correct definition of partial pressure *
A) The total pressure exerted by all gases in the mixture
B) The contribution each gas in a mixture makes to the total pressure
C) The space occupied a gas in the mixture
D) The amount of gas particles present in a mixture
Answer:A
Explanation:
Identify this reaction.
NH3 + H2SO4 → (NH4)2SO4
O decomposition
O synthesis
O double displacement
O single displacement
Answer: synthesis
Explanation:
Answer:
Synthesis
Explanation:
Two compounds combine to produce one compound
What feature of the sun changes to create the solar cycle?
a
Brightness
Hydrogen gas
Nuclear fusion
Magnetic field
Choose the aqueous solution below with the highest boiling point. These are all solutions of nonvolatile solutes and you should assume ideal van't Hoff factors where applicable.
A) 0.075 m NaI
B) 0.075 m (NH4)3PO4
C) 0.075 m NaBrO4
D) 0.075 m LiCN
E) 0.075 m KNO2
Answer:
B. (NH₄)₃PO₄
Explanation:
Elevation of boiling point is one of the colligative properties.
Formula is: ΔT = Kb . m . i
ΔT = Boiling T° of solution - Boiling T° of pure solvent.
i = Van't Hoff factor (numbers of ions dissolved)
Kb = Ebulloscopic constant
In this case, all the m are the same so let's dissociate the salts:
NaI → Na⁺ + I⁻ i = 2
(NH₄)₃PO₄ → 3NH₄⁺ + PO₄⁻³ i = 4
NaBrO₄ → Na⁺ + BrO₄⁻ i = 2
LiCN → Li⁺ + CN⁻ i = 2
KNO2 → K⁺ + NO₂⁻ i = 2
The biggest i would have the biggest boiling point, then B is the right answer, ammonium phosphate.
You count the i, with the moles of ions, you dissociate from the salt.
3- Given 90.0 g C6H1206
a- How many moles of Glucose are present in 90.0 g of glucose?
molar mass = 180.18
//
[tex]90.0 \: g \times \frac{1 \: mol}{180.18 \: g} = 0.4995004995 \: mol[/tex]
[tex] = 0.500 \: mol[/tex]
Can someone help me ASAP.
Answer:
This type of mutation occurs when one or more base pairs are added to the gene sequence: insertion
This type of mutation occurs when one or more base pairs take the place of other base pairs in the gene sequence: substitution
How are the atomic number and the number of protons related to each other?
Answer:
Neutral atoms of each element contain an equal number of protons and electrons. The number of protons determines an element's atomic number and is used to distinguish one element from another. ... Together, the number of protons and the number of neutrons determine an element's mass number.
Explanation:
Where is the youngest rock in the Atlantic Ocean found?
plz hurry
Answer:
Seafloor Ages
They found that the youngest rocks on the seafloor were at the mid-ocean ridges. The rocks get older with distance from the ridge crest.
hope this helped
As a team, determine the rules for naming binary ionic compounds that have a "special" transition metal in it when given the formula.
Answer:
Metal name (charge in roman numerals) Non metal
for example Iron (III) chloride
Explanation:
The rule for naming special transition metal are as follows -
a) First name the transition metal
b) Now write the name of the non metal in the chemical formula.
c) Write the charge for the non metal.
d) If there is a polyatomic ion, write the Common Ion Table ,its formula and charge.
e) Based on the total charge on the non-metal or polyatomic ion, deduce the total charge on the transition metal
f) Write the charge of transition metal after the name of metal in Roman Numeral in parentheses
Katrina inserts a key into her car’s ignition. She turns the key, putting her car into ignition mode. In this mode, some energy is used to increase the temperature of the car’s fuel. This energy allows the fuel to combust and the car to move. What’s this energy called?
A.
absorbed energy
B.
activation energy
C.
chemical energy
D.
released energy
E.
solar energy
Answer:
B
Explanation:
Answer:
the correct answer is B
Explanation:
In the reaction 2CO2+ 2H2O -> C2H4 + 3O2 , the mole ratio of water to oxygen is
I'm gonna guess 2:3 because you have two moles of water and three moles of oxygen
what's the formula for hypoarsenous acid?
Answer:
As(OH)3 or AsH3O3
Explanation:
What mass of MnCl2 is produced when 0.091 g of Cl2 is generated?
The mass of MnCl2 that is produced when 0.091 g of Cl2 is generated is 0.16 g.
Molar mass of MnCl₂ = 55 + 35.5(2) = 126 g/mol
Molar mass of Cl₂ = 35.5(2) = 71 g/mol
If 71 g of Cl₂ gives 126 g of MnCl₂
0.091 g of Cl₂ will give ? of MnCl₂
cross multiply
mass of MnCl₂ produced = 0.091 × 126 / 71
mass of MnCl₂ produced = 11.466 / 71
mass of MnCl₂ produced = 0.16149295774
mass of MnCl₂ produced ≈ 0.16 g
learn more about mass stoichiometric here: https://brainly.com/question/2617347?referrer=searchResults
Our current model of a chemical bond is to think of it as an electrical interaction between what two parts of an atom
Answer:
Explanation:
It involves the thinking of it as an electrical interaction between the positively charged part of an atom and the negatively charged part as well. Succinctly put, the interaction between the proton of an atom and the electron of an atom.
The relationship between these two sub atomic particles is one of the basis for many chemical bonding, and this is inclusive of all the bonds there exist. Hydrogen, Electrovalent and even Covalent bondings to mention but a few
How many grams of H,O are needed to produce 13 g of NaOH? 2 Na,O2 + 2 H20-4 NaOH + O2
Answer:
This is a typical stoichiometry question.To answer this question you want to get a relationship between
N
a
2
O and NaOH.
So you can get a relationship between the moles of
N
a
2
O
and moles of NaOH by the concept of stoichiometry.
N
a
2
O +
H
2
O ----------------> 2 NaOH.
According to above balanced equation we can have the stoichiometry relationship between
N
a
2
O and NaOH. as 1:2
It means 1 moles of
N
a
2
O is required to react with one mol of
H
2
O to produce 2 moles of NaOH.
in terms of mass 1 mole of
N
a
2
O has mass 62 g on reaction with water produces 2 moles of NaOH or 80 g of NaOH.
62 g of
N
a
2
O produces 80 g of NaOH.
1g of NaOH is produced from 62/80 g of
N
a
2
O
1.6 x
10
2
g of NaOH will require 62 x 1.6 x
10
2
g / 80 of
N
a
2
O
124g of
N
a
2
O.
Explanation:
What are the effects of colonialism on Africa today?
Colonialism made African colonies dependent by introducing a mono- cultural economy for the territories. It also dehumanized African labour force and traders. It forced Africans to work in colonial plantations at very low wages and displaced them from their land
Table sugar and salt are examples of? A. mixtures B. elements C. atoms D. compounds
Answer:
The answer is compound because they consist of multiple things.
