Answer:
[tex]M=0.0637M[/tex]
Explanation:
Hello,
In this case, the undergoing chemical reaction is:
[tex]Pb(NO_3)_2(aq)+2NaI(aq)\rightarrow PbI_2(s)+2NaNO_3(aq)[/tex]
Thus, for 0.904 g of precipitate, that is lead (II) iodide, we can compute the initial moles of lead (II) ions in lead (II) nitrate:
[tex]n_{Pb^{2+}}=0.904gPbI_2*\frac{1molPbI_2}{461gPbI_2}*\frac{1molPb(NO_3)_2}{1molPbI_2} *\frac{1molPb^{2+}}{1molPb(NO_3)_2} =1.96x10^{-3}molPb^{2+}[/tex]
Finally, the resulting molarity in 30.8 mL (0.0308 L):
[tex]M=\frac{1.96x10^{-3}molPb^{2+}}{0.0308L}\\ \\M=0.0637M[/tex]
Regards.
A boy with pneumonia has lungs with a volume of 1.7 L that fill with 0.070 mol of air when he inhales. When he exhales, his lung volume decreases to 1.3 L. Enter the number of moles of gas that remain in his lungs after he exhales. Assume constant temperature and pressure.
Answer:
0.053moles
Explanation:
Hello,
To calculate the number of moles of gas remaining in his after he exhale, we'll have to use Avogadro's law which states that the volume of a given mass of gas is directly proportional to its number of moles provided that temperature and pressure are kept constant. Mathematically,
V = kN, k = V / N
V1 / N1 = V2 / N2= V3 / N3 = Vx / Nx
V1 = 1.7L
N1 = 0.070mol
V2 = 1.3L
N2 = ?
From the above equation,
V1 / N1 = V2 / N2
Make N2 the subject of formula
N2 = (N1 × V2) / V1
N2 = (0.07 × 1.3) / 1.7
N2 = 0.053mol
The number of moles of gas in his lungs when he exhale is 0.053 moles
URGENT!! This is timed, PLEASE HELP!
Nitrogen gas can be prepared by passing gaseous ammonia over solid copper (II) oxide at high temperatures, as described by the following balanced equation:
2 NH3(g) + 3 CuO(s) → 1N2(g) + 3 Cu(s) + 3 H2O(g)
How many grams of N2 are formed when 120.51 g of NH3 are reacted with excess CuO?
(Please explain using steps and show the whole process. Make sure the answer is in sig figs)
Answer:
99.24 gm of nitrogen .
Explanation:
molecular weight of ammonia = 17 , molecular weight of nitrogen = 28.
2 NH₃(g) + 3 CuO(s) → 1N₂(g) + 3 Cu(s) + 3 H₂O(g)
2 x 17 gm 28 gm
( 34 gm )
34 gm of ammonia forms 28 gms of nitrogen
1 gm of ammonia forms 28 / 34 gms of nitrogen
120.51 gn of ammonia forms 28 x 120.51 / 34 gms of nitrogen
28 x 120.51 / 34 gms
= 99.24 gms of nitrogen will be formed .
Gallium is produced by the electrolysis of a solution made by dissolving gallium oxide in concentrated NaOH(aq). Calculate the amount of Ga(s) that can be deposited from a Ga(III) solution using a current of 0.850 A that flows for 60.0 min.
Answer:
Mass of Ga = 0.73694 gram
Explanation:
Given:
Current = 0.850 A
Time = 60 minutes
Find:
Amount of gas deposit.
Computation:
Total charge = Current × Time in second
Total charge = 0.850 × 60 × 60
Total charge = 3,060 C
Mole of electron = Total charge / Faraday constant [Faraday constant = 96,485.3329]
Mole of electron = 3,060 / 96,485.3329
Mole of electron = 0.0317146
Moles of Ga = 1/3 [Mole of electron]
Moles of Ga = 1/3 [0.0317146]
Moles of Ga = 0.01057
Mass of Ga = molar mass × Moles of Ga
Mass of Ga = 69.72 × 0.01057
Mass of Ga = 0.73694 gram
How is excitation in spectroscopy brought about
Answer: the exciation of molecules is brount by absorption of energy in spectroscpy
Explanation:
A student has an unknown sample of solution X. This solution is placed in a 1.00 cm wide cuvet and inserted into the spectrometer, producing an absorbance reading of 0.275 at a wavelength of 525.0 nm. What is the concentration of solution X in the unknown sample
Answer:
The concentration of the sample is 3.564x10⁻³M.
Explanation:
Using Lambert-Beer law, absorbance of a sample is directely proportional to its concentration.
The general graph of the absorbance of the standards with different concentrations is:
Y = 75.9X + 0.0045
R² = 0.9946
Where Y is the absorbance of the sample and X its concentration in mole/L.
If a solution has an absorbance of 0.275:
0.275 = 75.9X + 0.0045
0.2705 = 75.9X
3.564x10⁻³M = X → The concentration of the sample.
One proposed mechanism of the reaction of HBr with O2 is given here. HBr + O2 → HOOBr (slow) HOOBr + HBr → 2HOBr (fast) HOBr + HBr → H2O + Br2 (fast) What is the equation for the overall reaction?
Answer:
4 HBr + O2 → + 2H2O + 2Br2
Explanation:
Based on the following reaction mechanism:
HBr + O2 → HOOBr (slow)
HOOBr + HBr → 2HOBr (fast)
HOBr + HBr → H2O + Br2 (fast)
The equation for the overall reaction is the sum of the three reactions in which intermediaries of reaction (HOBr and HOOBr are canceled). That is 1 + 2 + 2*(3):
HBr + O2 + HOOBr + HBr + 2HOBr + 2HBr → HOOBr + 2HOBr + 2H2O + 2Br2
4 HBr + O2 → + 2H2O + 2Br2Beeing this reaction the equation of the overall reaction.
Identify whether each species functions as a Brønsted-Lowry acid or a Brønsted-Lowry base in this net ionic equation. HF (aq) + SO32- ⇌ F- + HSO3- Brønsted-Lowry _____ Brønsted-Lowry _____ Brønsted-Lowry _____ Brønsted-Lowry _____ In this reaction: The formula for the conjugate _____ of HF is The formula for the conjugate _____ of SO32- is
Explanation:
A Bronsted-Lowry base is a substance that accepts a proton in the form of a hydrogen (H) atom.
On the other hand;
Bronsted-Lowry acid is the substance that donates the proton.
HF (aq) + SO32- ⇌ F- + HSO3-
In the forward reaction;
Bronsted-Lowry acid : HF
Bronsted-Lowry base: SO32-
In the backward reaction;
Bronsted-Lowry acid : HSO3-
Bronsted-Lowry base: F-
The conjugate base of HF is F-
The conjugate acid of SO32- is HSO3-
If 25.8 mL of an AgNO3 solution is needed to precipitate all Cl- ions in a 1570 mg of KCl (forming AgCl), what is the molarity of the AgNO3nsolution?
Answer:
M=0.816M
Explanation:
Hello,
In this case, we should consider the following reaction:
[tex]AgNO_3+KCl\rightarrow KNO_3+AgCl[/tex]
Thus, by knowing the 1:1 molar ratio of silver nitrate and potassium chloride, we can easily compute the moles of silver nitrate precipitating the 1570 mg of potassium chloride considering its molar mass of 74.5513 g/mol:
[tex]n_{AgNO_3}=1570mgKCl*\frac{1gKCl}{1000mgKCl} *\frac{1molKCl}{74.5513gKCl}*\frac{1molAgNO_3}{1molKCl} \\\\n_{AgNO_3}=0.021molAgNO_3[/tex]
Then, by using the volume of silver nitrate in liters (0.0258 L), we can directly compute the molarity:
[tex]M=\frac{0.021molAgNO_3}{0.0258L}\\ \\M=0.816M[/tex]
Regards.
The following data show the rate constant of a reaction measured at several different temperatures. Temperature (K) Rate Constant (1/s) 310 0.194 320 0.554 330 1.48 340 3.74 350 8.97 Part APart complete Use an Arrhenius plot to determine the activation barrier for the reaction. Express your answer using three significant figures. Ea
Complete Question
The complete question is shown on the first uploaded image
Answer:
Part A
activation barrier for the reaction [tex]E_a = 84 .0 \ KJ/mol[/tex]
Part B
The frequency plot is [tex]A = 2.4*10^{13} s^{-1}[/tex]
Explanation:
From the question we are told that
at [tex]T_1 = 300 \ K[/tex] [tex]k_1 = 5.70 *10^{-2}[/tex]
and at [tex]T_2 = 310 \ K[/tex] [tex]k_2 = 0.169[/tex]
The Arrhenius plot is mathematically represented as
[tex]ln [\frac{k_2}{k_1} ] = \frac{E_a}{R} [\frac{1}{T_1} - \frac{1}{T_2} ][/tex]
Where [tex]E_a[/tex] is the activation barrier for the reaction
R is the gas constant with a value of [tex]R = 8.314*10^{-3} KJ/mol \cdot K[/tex]
Substituting values
[tex]ln [\frac{0.169}{6*10^-2{}} ] = \frac{E_a}{8.314*10^{-3}} [\frac{1}{300} - \frac{1}{310} ][/tex]
=> [tex]E_a = 84 .0 \ KJ/mol[/tex]
The Arrhenius plot can also be mathematically represented as
[tex]k = A * e^{-\frac{E_a}{RT} }[/tex]
Here we can use any value of k from the data table with there corresponding temperature let take [tex]k_2 \ and \ T_2[/tex]
So substituting values
[tex]0.169 = A e ^{- \frac{84.0}{8.314*10^{-3} * 310} }[/tex]
=> [tex]A = 2.4*10^{13} s^{-1}[/tex]
what type of bonds do compounds formed from non metal consist of?
Compounds formed from non-metals consist of molecules. The atoms in a molecule are joined together by covalent bonds. These bonds form when atoms share pairs of electrons.
An organic chemistry student was studying the solubility of Methyl-N-acetyl-α-D-glucosaminide (1-O-methyl-GlcNAc), a derivative of glucosamine, in water but inadvertently added 1 equiv. of periodic acid instead. Based on your understanding of the reactions of monosaccharides with periodates, draw the organic product that the student obtained.
Complete Question
The diagram for this question is shown on the second uploaded image
Answer:
The organic product obtained is shown on the first uploaded image
Explanation:
The process that lead to this product formation is known as oxidative cleavage which is a reaction that involves the cleavage of a carbon to carbon bond at the same time this carbon which formed the carbon bond are oxidized i.e oxygen is been added to them
Now construct a different electrochemical cell. You put a zinc metal anode in contact with a 0.052 M solution of zinc nitrate and a silver cathode in contact with a 0.0042 M solution of silver(I) nitrate. What is the value of the electric potential at the moment the reaction begins
Answer:
[tex]1.66~V[/tex]
Explanation:
We have to start with the half-reactions for both ions:
[tex]Zn^+^2~+2e^-~->Zn[/tex] V= -0.76
[tex]Ag^+~e^-~->~Ag[/tex] V= +0.80
If we want a spontaneous reaction (galvanic cell) we have to flip the first reaction, so:
[tex]Zn~->~Zn^+^2~+2e^-~[/tex] V= +0.76
[tex]Ag^+~+~e^-~->~Ag[/tex] V= +0.80
If we want to calculate ºE we have to add the two values, so:
ºE=0.76+0.80 = 1.56 V
Now, we have different concentrations. So, if we want to calculate E we have to use the nerts equation:
[tex]E=ºE~+~\frac{0.059}{n}LogQ[/tex]
On this case, Q is equal to:
[tex]Q=\frac{[Zn^+^2]}{[Ag^+]^2}[/tex]
Because the total reaction is:
[tex]Zn~+~2Ag^+~->~Zn^+^2~+~2Ag[/tex]
So, the value of "Q" is:
[tex]Q=\frac{[0.052 M]}{[0.0042]^2}=2947.84[/tex]
Now, we can plug all the values in the equation (n=2, because the amount of electrons transferred is 2). So:
[tex]E=1.56~V~+~\frac{0.059}{2}Log(2947.84)=1.66~V[/tex]
I hope it helps!
A mixture of compounds containing diethylamine, phenol, ammonia, and acetic acid is separated using liquid-liquid extraction as follows: Step 1: Concentrated HCl is added followed by draining the aqueous layer. Step 2: Dilute NaOH is added to the organic layer followed by draining the aqueous layer. Step 3: Concentrated NaOH is added to the organic layer followed by draining the aqueous layer. Which compound would you expect to be extracted into the aqueous layer after the addition of dilute HCl, step 1? Group of answer choices
Complete Question
The complete question is shown on the first uploaded image
Answer:
The correct option is ammonia
Explanation:
The mixture contains two base compound which are
ammonia,
and diethylamine
Now the addition of HCl which is a strong acid in step 1 will cause the protonation of the two base compound , which makes the soluble hence resulting in them being extracted to the aqueous layer as represented in below
[tex]NH_3 + HCl\to NH_4 ^{+} + Cl^-[/tex]
and
[tex](CH 3CH 2) 2NH + HCl \to (CH 3CH 2) 2NH_2^{+} + Cl[/tex]
Which option describes a similarity and a difference between isotopes of an element? A. same atomic number; different number of protons B. same number of protons; different atomic number C. same atomic number; different mass number D. same mass number; different atomic number E. same number of neutrons; same number of protons
Answer:
c
Explanation:
g a solution is made by mixing 500.0 mL of 0.037980.03798 M Na2sO4 Na2sO4 with 500.0 mL of 0.034280.03428 M NaOH NaOH . Complete the mass balance expressions for the sodium and arsenate species in the final solution.
Answer:
The concentration of the sodium and arsenate ions at the end of the reaction in the final solution
[Na⁺] = 0.05512 M
[HAsO₄²⁻] = 0.00185 M
[AsO₄³⁻] = 0.01714 M
Explanation:
Complete Question
A solution is made by 500.0 mL of 0.03798 M Na₂HAsO₄ with 500.0 mL of 0.03428 M NaOH. Complete the mass balance expressions for the sodium and arsenate species in the final solution.
Na₂HAsO₄ + NaOH → Na₃AsO₄ + H₂O
From the information provided in this question, we can calculate the number of moles of each reactant at the start of the reaction and we then determine which reagent is in excess and which one is the limiting reagent (in short supply and determines the amount of products to be formed)
Concentration in mol/L = (Number of moles) ÷ (Volume in L)
Number of moles = (Concentration in mol/L) × (Number of moles)
For Na₂HAsO₄
Concentration in mol/L = 0.03798 M
Volume in L = (500/1000) = 0.50 L
Number of moles = 0.03798 × 0.5 = 0.01899 mole
For NaOH
Concentration in mol/L = 0.03428 M
Volume in L = (500/1000) = 0.50 L
Number of moles = 0.03428 × 0.5 = 0.01714 mole
Since the NaOH is in short supply, it is evident that it is the limiting reagent and Na₂HAsO₄ is in excess.
Na₂HAsO₄ + NaOH → Na₃AsO₄ + H₂O
0.01899 0.01714 0 0 (At time t=0)
(0.01899 - 0.1714) | 0 → 0.01714 0.01714 (end)
0.00185 | 0 → 0.01714 0.01714 (end)
Hence, at the end of the reaction, the following compounds have the following number of moles
Na₂HAsO₄ = 0.00185 mole
This means Na⁺ has (2×0.00185) = 0.0037 mole at the end of the reaction and (HAsO₄)²⁻ has 0.00185 mole at the end of the reaction
NaOH = 0 mole
Na₃AsO₄ = 0.01714 moles
This means Na⁺ has (3×0.01714) = 0.05142 mole at the end of the reaction and (AsO₄)³⁻ has 0.01714 mole at the end of the reaction
H₂O = 0.01714 moles
So, at the end of the reaction
Na⁺ has 0.0037 + 0.05142 = 0.05512 mole
(HAsO₄)²⁻ has 0.00185 mole
(AsO₄)³⁻ has 0.01714 mole.
And since the Total volume of the reaction setup is now 500 mL + 500 mL = 1000 mL = 1 L
Hence, the concentration of the sodium and arsenate ions at the end of the reaction is
[Na⁺] = 0.05512 M
[HAsO₄²⁻] = 0.00185 M
[AsO₄³⁻] = 0.01714 M
Hope this Helps!!!
Answer:
[tex]\rm [Na^{+}]= \text{0.055 12 mol/L}[/tex]
[tex]\rm [HAsO_{4}^{2-}] + [AsO_{4}^{3-}] + [H_{2}AsO_{4}^{-}] + [H_{3}AsO_{4}] = \text{0.018 99 mol/L}[/tex]
Explanation:
The overall equation for the reaction is
Na₂HAsO₄ + NaOH ⟶ Na₃AsO₄ + H₂O
1. Mass balance for Na
All the Na⁺ comes from the Na₂HAsO₄ and the NaOH.
The mass balance equation for Na is
[tex]\rm c_{Na^{+}} = 2[Na^{+}]_{Na_{2}HAsO_{4}} + [Na^{+}]_{NaOH}[/tex]
At the moment of mixing and before the reaction started, the total volume had doubled, so the concentrations of each component were halved.
[Na₂HAsO₄] = ½ × 0.037 98 =0.018 99 mol·L⁻¹
[NaOH] = ½ × 0.034 28 = 0.017 14 mol·L⁻¹
[tex]\rm c_{Na^{+}} = 2\times 0.01899 + 0.01714 = 0.03798 + 0.01714\\c_{Na^{+}}= \textbf{0.055 12 mol/L}[/tex]
2. Mass balance for arsenate species
All the arsenate species come from the Na₂HAsO₄.
The reactions involved are
HAsO₄²⁻+ OH⁻ ⇌ AsO₄³⁻ + H₂O
HAsO₄²⁻ + H₂O ⇌ H₂AsO₄⁻ + OH⁻
H₂AsO₄⁻ + H₂O ⇌ H₃AsO₄ + OH⁻
The mass balance equation for arsenate species is
[tex]\rm c_{\text{arsenate}} = [HAsO_{4}^{2-}] + [AsO_{4}^{3-}] + [H_{2}AsO_{4}^{-}] + [H_{3}AsO_{4}][/tex]
At the moment of mixing, the concentration of Na₂HAsO₄ had halved.
[Na₂HAsO₄] = ½ × 0.039 78 = 0.018 99 mol·L⁻¹
[tex]\rm [HAsO_{4}^{2-}] + [AsO_{4}^{3-}] + [H_{2}AsO_{4}^{-}] + [H_{3}AsO_{4}] = \textbf{0.018 99 mol/L}[/tex]
Show work plzzz
Unknown Metal Bar #8
Mass of Unknown Metal bar 11.3g
Length of bar 13.90cm
Width of bar 2.9cm
Thickness of bar 0.081cm
1. Calculate the volume of the bar:
2. Calculate the (experimental) density of the bar:
3. Based on the provided list of (true) densities, what is the possible identity of the Unknown metal?
4. What is the percent difference between the true density of your metal and the calculated density?
= | − | ∗ 100%
Answer:
1= Volume
= Length x breath x height
= 13.90 x 2.9 x 0.081
=3.26511
2= Density = Mass ÷ volume
= 11.3 ÷ 3.26511
= 3.461 (3d.p)
idk the rest because you haven't shown a picture of the rest
Answer:
1. 3.3 cm³; 2. 3.5 g/cm³; 3. barium; 4. 4%
Explanation:
Experimental data:
Mass = 11.3 g
Length = 13.90 cm
Width = 2.9 cm
Thickness = 0.081 cm
Calculations:
1. Volume of bar
V = lwh = 13.90 cm × 2.9 cm × 0.081 cm = 3.3 cm³
2. Experimental density
[tex]\text{Density} = \dfrac{m}{V} = \dfrac{\text{11.3 g}}{\text{3.27 cm}^{3}} = \textbf{3.5 cm}^{\mathbf{3}}[/tex]
3. Identity of metal
The three most likely metals are scandium (3.00 g/cm³), barium (3.59 g/cm³), and yttrium (4.47 g/cm³)
The metal is probably barium.
4. Percent difference
[tex]\begin{array}{rcl}\text{Percent difference}&= &\dfrac{\lvert \text{ True - Calculated}\lvert}{ \text{True}} \times 100 \,\%\\\\& = & \dfrac{\lvert 3.59 - 3.5\lvert}{3.59} \times 100 \, \% \\\\& = & \dfrac{\lvert 0.1\lvert}{3.59} \times 100 \, \%\\ \\& = & 0.04 \times 100 \, \%\\& = & \mathbf{4 \, \%}\\\end{array}\\\text{The percent difference is $\large \boxed{\mathbf{4 \, \%} }$}[/tex]
A geochemist in the field takes a 46.0 mL sample of water from a rock pool lined with crystals of a certain mineral compound X. He notes the temperature of the pool, 21°C, and caps the sample carefully. Back in the lab, the geochemist filters the sample and then evaporates all the water under vacuum. Crystals of X are left behind. The researcher washes, dries and weighs the crystals. They weigh 0.87 g.
Required:
Using only the information above, can you calculate the solubility of X in water at 21°C? If yes, calculate it.
Answer: The solubility of X in water is [tex]1.891 \times 10^{-2}[/tex] g/ml.
Explanation:
The given data is as follows.
Volume of sample water = 46 ml
Temperature = [tex]21^oC[/tex]
After vaporization, washes and then drying the weight of mineral X = 0.87 g
This means that 46.0 ml of water contains 0.87 g of X. Therefore, grams present in 1 ml of water will be calculated as follows.
1 ml of water = [tex]\frac{0.87 g}{46.0 ml}[/tex]
= [tex]1.891 \times 10^{-2}[/tex] g/ml
Therefore, we can conclude that solubility of X in water is [tex]1.891 \times 10^{-2}[/tex] g/ml.
Consider the following reaction. I– 2 H2O2 (l) 2 H2O (l) + O2 (g) A solution contains 15 mL 0.1 M KI, 15 mL of DI water and 5 mL of 3% H2O2. After the decomposition of H2O2 is complete, you titrate the solution with 0.1 M AgNO3. If the catalyst, I–, is not consumed in the reaction and is completely recovered, what volume of the 0.1 M AgNO3 is required to reach the end point?
Answer:
Explanation:
The given chemical reaction is:
[tex]2H_2O_{(l)} \to^{I^-}} 2H_2O_{(l)}+O_2_{(g)}[/tex]
From above equation [tex]I^-[/tex] serves as catalyst which is not consumed by the reaction and also it is completely recovered; as a result to that , the full volume of KI will definitely react with AgNO₃.
Given that :
the volume of potassium iodide [tex]V_{KI} = 15 \ ml[/tex]
the molarity of potassium [tex]M_{KI} = 0.1 \ M[/tex]
the volume of distilled water [tex]V_W = 15 \ mL[/tex]
The volume of 3% [tex]H_2O_2 \ \ V_{H_2O_2} = 5 \ mL[/tex]
Molarity of AgNO₃ [tex]M_{AgNO_3} = 0.1 \ M[/tex]
Let take an integral look with the reaction between KI and AgNO₃; we have
[tex]KI + AgNO_3 \to KNO_3 + AgI[/tex]
At the end point; the moles of KI will definitely be equal to the moles of AgNO₃
So;
[tex]M_{KI}V_{KI}= M_{AgNO_3}V_{AgNO_3} \\ \\ V_{AgNO_3} = \dfrac{M_{KI}V_{KI}}{M_{AgNO_3}} \\ \\ \\ V_{AgNO_3} = \dfrac{ 0.1*15}{0.1}[/tex]
[tex]V_{AgNO_3} = 15 \ ml[/tex]
Thus; the volume of 0.1 M AgNO₃ needed to reach the end point is 15 mL
7.Which one of the following statements is not true?
1 point
O The molecules in a solid vibrate about a fixed position
O The molecules in a liquid are arranged in a regular pattern
The molecules in a gas exert negligibly small forces on each other, except during
collisions
The molecules of a gas occupy all the space available
Answer:
B. the molecules in liquid are loosely packed and scattered thus, they cannot be arranged
The three‑dimensional structure of a generic molecule is given. Identify the axial and equatorial atoms in the three‑dimensional structure. What is the shape of this molecule?
Answer:
Explanation:
CHECK THE ATTACHMENT FOR THE COMPLETE QUESTION AND THE DETAILED EXPLANATION
NOTE:
Equatorial atoms are referred to atoms that are attached to carbons in the cyclohexane ring which is found at the equator of the ring.
Axial atoms are atoms that exist in a bond which is parallel to the axis of the ring in cyclohexane
At 25.0 °C the Henry's Law constant for sulfur hexafluoride (SP) gas in water is 2.4x 10 M/atm Calculate the mass in grams of SFo, gas that can be dissolved in S25. ml. of water at 25.0 C and a SF, partial pressure of 1.90 atm Be sure your answer has the correct number of significant digits.
Complete Question
The complete question is shown on the first uploaded image
Answer:
The mass is [tex]m = 0.0349 \ g[/tex]
Explanation:
From the question we are told that
The Henry's Law constant is [tex]k = 2.4 *10^{10} M/atm[/tex]
The volume of water is [tex]V = 525 \ ml = 0.525 \ L[/tex]
The partial pressure is [tex]P = 1.90 \ atm[/tex]
The temperature is [tex]T = 25 ^oC[/tex]
Henry's law is mathematically represented as
[tex]C = P * k[/tex]
Where C is the concentration of sulfur hexafluoride(SP)
substituting value
[tex]C = 1.90 * 2.4*10^{-4}[/tex]
[tex]C = 4.56*10^{-4} \ M[/tex]
The number of moles of SP is mathematically represented as
[tex]n = C * V[/tex]
substituting value
[tex]n = 0.525 * 4.56*10^{-4}[/tex]
[tex]n = 2.39 *10^{-4} \ moles[/tex]
The mass of SP that dissolved is
[tex]m = n * Z[/tex]
Where Z is the molar mass of SP which has a constant value of
[tex]Z = 146 g/mole[/tex]
So
[tex]m = 2.394*10^{-4} * 146[/tex]
[tex]m = 0.0349 \ g[/tex]
Best example of potential energy?
Answer:
water stored in a dam
Explanation:
when the water is in dam it is ready to move bit is not moving
Monel metal is a corrosion-resistant copper-nickel alloy used in the electronics industry. A particular alloy with a density of 8.80 g/cm3 and containing 0.090 % Si by mass is used to make a rectangular plate that is 15.0 cm long, 12.5 cm wide, and 3.50 mm thick and has a 2.50-cm-diameter hole drilled through its center such that the height of the hole is 3.50 mm .
The silicon in the plate is a mixture of naturally occurring isotopes. One of the those isotopes is silicon-30, which has an atomic mass of 29.97376 amu. The percent natural abundance, which refers to the atoms of a specific isotope, of silicon-30 is 3.10%.
Part A What is the volume of the plate?Express the volume numerically in cubic centimeters.
Part B How many silicon-30 atoms are found in this plate?
Express your answer numerically using two significant figures.
Answer:
Based on the given question, the dimensions of the plate is 15 cm in length, 12.5 cm in width, and 3.50 mm in thickness (0.350 cm). Now the volume of the plate will be,
V = 15 cm × 12.5 cm × 0.350 cm = 65.62 cm³
A hole of diameter 2.50 cm is drilled through the center of the plate, at the height of 3.50 mm or 0.350 cm. Now the volume of the hole is π(r)²h,
= 22/7 × (1.25 cm)² × 0.350 cm = 1.72 cm³
Thus, the volume of the plate will be determined by subtracting the volume of plate with the volume of hole, which will be,
65.62 cm³ - 1.72 cm³ = 63.9 cm³
The density of the alloy is 8.80 g/cm³, therefore, the mass of the alloy can be determined by using the formula, mass = density * volume
mass = 8.80 g/cm³ × 63.9 cm³ = 562.32 grams
Of the total alloy, 0.090 percent is Si, that is,
(0.090/100) × 562.32 g = 0.506 grams of Si
The natural abundance of the element is not determined by mass but by the number of atoms it possess. For this Avogadro's number and atomic mass of Si is used. Now the number of atoms of Si present is,
(0.506 g) (1 mol/28.0855 g) (6.023 × 10²³ atoms /mol) = 1.08 × 10²² Si atoms
Of these Si atoms, 3.10 percent are Si-30 so,
= (3.10 / 100) × (1.08 × 10²² atoms) / 1000 = 3.34 × 10²⁰ atoms of Si-30. or 3.4 × 10²⁰ atoms
Classify an element having the following ground state electron configuration as an alkali metal, alkaline earth metal, nonmetal, halogen, transition metal, or noble gas.
a. [Ne]3s1
b. [Ne]3s23p3
c. [Ar]4s23d104p5
d. [Kr]5s24d1
e. [Kr]5s24d105p6
Explanation:
Alkali metal refers to group1 elements.
Alkali earth metal refers to group 2 elements.
Non metals refers to elements in grouos 4 to group 7.
Halogen refers to group 17 elements
Transition Metal refers to group 3 to group 12 elements
Noble gases refer to elements in group 18.
To obtain the group number from the electronic configuration, we calculate the total number of electrons in the principal quantum number (coefficient of the letters).
a. [Ne]3s1
Principal quantum number = 3
Number of electrons present = 1
This element belongs to group 1. It is an Alkali Metal.
b. [Ne]3s23p3
Principal quantum number = 3
Number of electrons present = 2 + 3 = 5
This element belongs to group 15 (5A). It is a Non metal
c. [Ar]4s23d104p5
Principal quantum number = 4
Number of electrons present = 2 + 5 = 7
This element belongs to group 17 (7A). It is an Halogen.
d. [Kr]5s24d1
This configuration belongs to the element yttrium and has an incomplete d shell. Hence it is a transition metal.
e. [Kr]5s24d105p6
Principal quantum number = 5
Number of electrons present = 2 + 6 = 8
This element belongs to group 18 (8A). It is a Noble gas.
Which of the following are not created by an arrangement of electric charges
or a current (the flow of electric charges)?
A. An electric field
B. A magnetic field
C. A quantum field
D. A gravitational field
Answer:
gravitational and quantum ARE NOT, but electric and magnetic ARE. there is a similar question to this but it's the exact opposite, so don't get confused
A sample of chloroform, CHCl 3 , , was determined to have a molecular mass of 112.3g / (mol) . Its molecular mass is known to be 119.5g / (mol) . Calculate the absolute error and the percent error
Answer:
Explanation:
in your case ,
Meaured value = 112.3
actual value = 119.5
Absolute error= measured value - actual value
Percent error = [measured value - actual value / actual value ] x 100
Hope this help you to find the answer
A maple tree could be studied in many fields of science. What aspects of a maple tree might be studied in chemistry?
Answer:
Chemical reactions, kinetics, organic chemistry
Explanation:
You might study the chemical reaction, learn about the differences between products and reactants, about delta H and exothermic and endothermic reactions. You may also study Kinetics by studying the rates of reactions with certain chemicals in a maple's enzymatic processes.
Another thing that you might learn about is organic chemistry. The glucose molecules, carbohydrates, lipids, nucleic acids, all have a structure based on the Carbon atom. You can learn about the specific structures of some chemicals that are involved in photosynthesis and simple hydrocarbons that are involved in photosynthetic/bio-synthetic pathways.
There's probably a lot more - but these are the most basic things I could think of.
Which of the following is a chemical property of iron? It
Answer:
is capable of combining with oxygen to form iron oxide
Gravity on Earth is 9.8 m/s2, and gravity on the Moon is 1.6 m/s2.
so if the mass of an object on earth is 40 kilograms what is the mass on the moon.
and how much does it way
Answer:
Mass is the same but it weights 64 Newtons
Explanation:
First of Mass is the same in any sort of gravity. Now let's calculate weight
W = MG
where W = Weight
M = Mass
G = Gravity
W = (40kg)(1.6)
W = 64
Sorry for the spelling mistakes, hope this helps
Answer:6.61kilo
Explanation: fdfv
When you look at an ant up close, using a convex lens, what do you see?
Answer:
You would be able to see the ants clearly with the unique body parts.
Explanation:
Convex lens is also known as Converging lens. It helps in converging rays of light to become a principal focus which is usually very clear and visible to the eyes. The converging lens when used to view the ant makes the ant appear very visible and the individual is able to see all the unique body parts of the ant. This type of lens is used in individuals who are longsighted.
