Find the measure of the listed angles. Show all your work

The mean of Kelly's second data set doesn't change compared to the mean of her original survey because none of the classmates were given math homework.

To determine the change in the means without calculating the mean of either data set, you can compare the number of data points, the range, and any outliers. If the number of data points and the range are the same and there are no outliers, then the means will be the same.

In this case, since none of the classmates had math homework in both surveys, there are no changes in the data set, and the means remain the same. Therefore, there is no change in the mean of Kelly's second data set compared to her original survey.

To know more about data points click on below link:

https://brainly.com/question/17148634#

#SPJ11

The rectangular pen with dimensions 5 x 6 x 2 is the largest pen that can be made using all 40 cubes.

To maximize the area of the pen, we need to create a rectangular shape. We can use all 40 cubes to create a rectangular pen with dimensions 5 x 6 x 2.

To build the pen, we can use 10 cubes for the base layer, then add 15 cubes for the second layer, and finally add 15 cubes for the third layer, creating a total of 40 cubes.

The base layer will be a rectangle with dimensions 5 x 6, and we will use 10 cubes to create it. Then we can stack two more layers of cubes on top of the base layer, each layer will have dimensions 5 x 6 and will use 15 cubes.

To prove that this pen has the largest area that can be made with 40 cubes, we can compare it with other possible shapes. For example, if we try to create a cube-shaped pen, we would only be able to create a cube with side length 3, which would have a volume of 27 and therefore could not use all 40 cubes.

Therefore, the rectangular pen with dimensions 5 x 6 x 2 is the largest pen that can be made using all 40 cubes.

To know more about rectangle refer here:

https://brainly.com/question/29123947

#SPJ11

(a) Miguel had the greatest spread in training times.

(b) Adam had the least spread in the middle 50% of training times.

(c) Miguel's training times had a greater range, indicating more variability, while Adam's training times were more consistent and tightly grouped.

(a) To determine which person had the greatest spread, we need to compare the range or variability of their training times. By observing the given data, we can see that Adam's training times range from 92 to 106, resulting in a spread of 14. On the other hand, Miguel's training times range from 85 to 105, resulting in a spread of 20. Therefore, Miguel had the greatest spread of training times.

(b) To determine which person had the least spread in the middle 50% of training times, we need to compare the interquartile range (IQR). By calculating the IQR, we find that Adam's IQR is 9 (from the 25th to the 75th percentile), whereas Miguel's IQR is 7. Since Adam's IQR is greater, it means Miguel had the least spread in the middle 50% of training times.

(c) The answers to parts (a) and (b) indicate that while Miguel had a greater spread of training times overall, Adam's training times had a greater spread in the middle 50%. This suggests that Adam's training times were more concentrated around the median, while Miguel's training times were more spread out.

Learn more about variability

brainly.com/question/17344045

#SPJ11

a) All of the training times of Adam had the greatest spread.

(b) The middle 50% of the training times of Adam had the least spread.

(c) The answers to Parts (a) and (b) tell us that Adam's training performance may be more stable within that middle 50%, while Miguel's performance is more variable.

(a) Adam's training times had the greatest spread.

To determine this, we can calculate the range of the data sets. For Adam, the range is 106-92 = 14 seconds, while for Miguel, the range is 105-85 = 20 seconds. However, a better measure of spread is the interquartile range (IQR), which focuses on the middle 50% of the data. For Adam, the IQR is 101-97 = 4 seconds, while for Miguel, the IQR is 96-89 = 7 seconds. In both cases, Miguel's data has a greater spread.

(b) Adam's training times had the least spread for the middle 50% of the data. This is demonstrated by the IQR, as mentioned above. For Adam, the IQR is 4 seconds, while for Miguel, it is 7 seconds.

(c) The answers to Parts 2(a) and 2(b) tell us that while Miguel's overall training times have a greater spread, the middle 50% of Adam's training times are more consistent, with less variation. This suggests that Adam's training performance may be more stable within that middle 50%, while Miguel's performance is more variable.

Learn more about Spread:

https://brainly.com/question/12750165

#SPJ11

(a) The marginal cost function is C'(x) = 5 + 0.16x + 0.0012x².

(b) C'(100) = 21.00. This predicts the approximate cost of the 101st pair of jeans.

(c) The difference between C'(100) and the actual cost of manufacturing the 101st pair of jeans is $20.51.

(a) To find the marginal cost function, we need to take the derivative of the cost function C(x) with respect to x:

C'(x) = 5 + 0.16x + 0.0012x²

(b) To find C'(100), we substitute x = 100 into the marginal cost function:

C'(100) = 5 + 0.16(100) + 0.0012(100)²
C'(100) = 21.00

This predicts the approximate cost of the 101st pair of jeans, as the marginal cost function tells us the cost of producing one additional unit (pair of jeans) at a given quantity. So, we can use C'(100) to estimate the cost of producing the 101st pair of jeans.

To find the approximate cost of the 100th pair of jeans, we can substitute x = 100 into the cost function C(x):

C(100) = -1700 + 5(100) + 0.08(100)² + 0.0004(100)³
C(100) = $2330

So, the approximate cost of the 100th pair of jeans is $2330.

To find the approximate cost of the 101st pair of jeans, we can add C'(100) to the cost of producing 100 pairs of jeans:

C(100) + C'(100) = $2330 + $21.00
C(101) ≈ $2351

So, the approximate cost of the 101st pair of jeans is $2351.

To find the exact cost of the 99th pair of jeans, we can substitute x = 99 into the cost function C(x):

C(99) = -1700 + 5(99) + 0.08(99)² + 0.0004(99)³
C(99) = $2288.44

So, the exact cost of the 99th pair of jeans is $2288.44.

(c) To find the difference between C'(100) and the actual cost of manufacturing the 101st pair of jeans, we need to subtract the cost of producing 100 pairs of jeans from the cost of producing 101 pairs of jeans:

C(101) - C(100) = [-1700 + 5(101) + 0.08(101)² + 0.0004(101)³] - [-1700 + 5(100) + 0.08(100)² + 0.0004(100)³]
C(101) - C(100) = $20.51

So, the difference between C'(100) and the actual cost of manufacturing the 101st pair of jeans is $20.51.

For more such questions on Marginal cost function.

https://brainly.com/question/29583181#

#SPJ11

Critical numbers: 0, -3, 3
Increasing intervals: (-∞, -3), (3, ∞)
Decreasing intervals: (-3, 0), (0, 3)

Let's analyze the given function and find the critical numbers, as well as the intervals where it is increasing or decreasing.

Function: f(x) = x^2 / (x^2 - 9)

1. Find the critical numbers:
To find the critical numbers, we need to compute the first derivative of the function and set it equal to zero or identify where it's undefined.

f'(x) = (2x(x^2 - 9) - x^2(2x)) / (x^2 - 9)^2 = (2x^3 - 18x - 2x^3) / (x^2 - 9)^2 = -18x / (x^2 - 9)^2

Setting f'(x) equal to zero:
-18x = 0
x = 0

Now, let's check where f'(x) is undefined:
x^2 - 9 = 0
x = ±3

Thus, the critical numbers are 0, -3, and 3.

2. Find the open intervals where the function is increasing or decreasing:
To determine the intervals, we will examine the sign of f'(x) in the intervals determined by the critical numbers: (-∞, -3), (-3, 0), (0, 3), (3, ∞).

Interval (-∞, -3): Choose x = -4, then f'(-4) > 0. So, f(x) is increasing on this interval.

Interval (-3, 0): Choose x = -1, then f'(-1) < 0. So, f(x) is decreasing on this interval.

Interval (0, 3): Choose x = 1, then f'(1) < 0. So, f(x) is decreasing on this interval.

Interval (3, ∞): Choose x = 4, then f'(4) > 0. So, f(x) is increasing on this interval.

Your answer:
Critical numbers: 0, -3, 3
Increasing intervals: (-∞, -3), (3, ∞)
Decreasing intervals: (-3, 0), (0, 3)

To learn more about critical numbers, refer below:

https://brainly.com/question/29743892

#SPJ11

The probability of the complement of the event of Ignacio chooses a plant at random that does not have a white bloom is 0.7692.

The probability of an occurrence is a figure that represents how likely it is that the event will take place. In terms of percentage notation, it is stated as a number between 0 and 1, or between 0% and 100%. The higher the likelihood, the more probable it is that the event will take place.

Probability is a way to gauge how likely something is to happen. Several things are difficult to forecast with absolute confidence. With it, we can only make predictions about the likelihood of an event happening, or how likely it is.

The probability that Ignacio chooses the plant which have white bloom in it is,

P = number of white bloom / total number of flowers

P = 21 / 91

So the probability that the chosen flower is not white is,

1 - P = 1 - 21/91 = 70/91 = 0.7692.

Therefore, the probability of not choosing white is 0.7692.

Learn more about Probability:

https://brainly.com/question/30859510

#SPJ4

The coordinates of point M are:

Coordinates of M = (4.5 + sqrt(34)/5, 5)
Coordinates of M = (5.86, 5)

To find the coordinates of point M, we first need to find the coordinates of the midpoint of segment PQ.

The midpoint of a line segment with endpoints (x1, y1) and (x2, y2) is ((x1 + x2)/2, (y1 + y2)/2).

Using this formula, we can find the midpoint of PQ as follows:

Midpoint = ((6 + 3)/2, (2 + 8)/2)
Midpoint = (4.5, 5)

Now we can use the fact that PM/MQ = 2/3 to find the coordinates of point M.

Let's start by finding the distance between P and the midpoint:

Distance between P and midpoint = sqrt((4.5 - 6)^2 + (5 - 2)^2)
Distance between P and midpoint = sqrt(4.25)

Since PM/MQ = 2/3, we know that PM is 2/5 of the total distance between P and Q, and MQ is 3/5 of the total distance.

Let's call the total distance between P and Q "d". Then we have:

PM = (2/5)d
MQ = (3/5)d

We can use these expressions to find the distance between M and the midpoint:

Distance between M and midpoint = PM - MQ
Distance between M and midpoint = (2/5)d - (3/5)d
Distance between M and midpoint = -(1/5)d

Finally, we can use the distance formula to find the coordinates of point M:

Coordinates of M = (4.5, 5) + (Distance between M and midpoint in the x direction, Distance between M and midpoint in the y direction)

In other words, the x-coordinate of M is 4.5 plus the distance between M and the midpoint in the x direction, and the y-coordinate of M is 5 plus the distance between M and the midpoint in the y direction.

We already know that the distance between M and the midpoint in the y direction is 0 (since M lies on the same horizontal line as the midpoint), so we only need to find the distance between M and the midpoint in the x direction:

Distance between M and midpoint in the x direction = sqrt((1/5)d^2)

Since d is just the distance between P and Q, we can find it using the distance formula:

d = sqrt((6 - 3)^2 + (2 - 8)^2)
d = sqrt(34)

So we have:

Distance between M and midpoint in the x direction = sqrt((1/5)(sqrt(34))^2)
Distance between M and midpoint in the x direction = sqrt(34)/5

To know more about coordinates refer to

https://brainly.com/question/17206319

#SPJ11

Given d = ba, we can write:

d11 = b1a1 + b2a3

d12 = b1a2 + b2a4

d21 = b3a1 + b4a3

d22 = b3a2 + b4a4

To find the product of d, we need to find the values of b and a such that d11 = d12 = d21 = d22.

Let's assume that d11 = d12 = d21 = d22 = x. Then, we have:

b1a1 + b2a3 = x

b1a2 + b2a4 = x

b3a1 + b4a3 = x

b3a2 + b4a4 = x

We can solve for b1, b2, b3, and b4 in terms of a1, a2, a3, and a4:

b1 = (x - b2a3)/a1

b2 = (x - b1a1)/a3

b3 = (x - b4a3)/a1

b4 = (x - b3a1)/a3

Substituting these values of b1, b2, b3, and b4 into the equation d = ba, we get:

d11 = x = a1(x - b1a3)/a1 + a3(x - b2a1)/a3

= x - b1a3 + x - b2a1

= 2x - (b1a3 + b2a1)

d12 = x = a2(x - b1a3)/a1 + a4(x - b2a1)/a3

= (a2/a1)x - (b1a2 + b2a4) + (a4/a3)x - (b1a4 + b2a4)

= x - (b1a2 + b2a4)

d21 = x = a1(x - b3a3)/a1 + a3(x - b4a1)/a3

= (a1/a1)x - (b3a3 + b4a3) + (a3/a3)x - (b3a1 + b4a3)

= x - (b3a1 + b4a3)

d22 = x = a2(x - b3a3)/a1 + a4(x - b4a1)/a3

= (a2/a1)x - (b3a2 + b4a4) + (a4/a3)x - (b3a4 + b4a4)

= x - (b3a2 + b4a4)

We can rewrite these equations in matrix form as:

| 2 -a3-a1 0 0 || x | | b1a3 + b2a1 |

| 0 a2 0 -a4 || | = | b1a2 + b2a4 |

| -a3-a1 0 2 -a1 || | | b3a1 + b4a3 |

| 0 -a4 -a1 2 || | | b3a2 + b4a4 |

To solve for x, we need to invert the matrix on the left and multiply it by the vector on the right:

| x | | 2 -a3-a1 0

To know more about multiply refer here

httpsbrainly.42663642#

#SPJ11

If the first cube has a volume of 125 cm³ and the second cube has a volume of 343 cm³, the difference in the area of one face of the second cube and the area of one face of the first cube is 24cm². The answer is B. 24 cm².

To find the difference in the area of one face of each cube, we first need to find the side length of each cube. Since the volume of a cube is equal to the side length cubed (V = s³), we can find the side length by taking the cube root of the volume.

For the first cube:
Volume = 125 cm³
Side length = cube root of 125 = 5 cm

For the second cube:
Volume = 343 cm³
Side length = cube root of 343 = 7 cm

Next, we find the area of one face of each cube. The area of one face of a cube is equal to the side length squared (A = s²).

Area of one face of the first cube:
A1 = 5² = 25 cm²

Area of one face of the second cube:
A2 = 7² = 49 cm²

Finally, find the difference in the area of one face of each cube:
Difference = A2 - A1 = 49 cm² - 25 cm² = 24 cm²

The answer is B. 24 cm².

More on cube area: https://brainly.com/question/14994710

#SPJ11

Part a. The magnitude of the angular acceleration of the salad spinner as it slows down is 4.00 radians/s².

Part b. It takes 1.00 seconds for the salad spinner to come to rest.

Part A:

The initial angular velocity of the spinner is given by:

ω1 = 20.0 rotations / 5.00 s = 4.00 rotations/s

The final angular velocity of the spinner is zero.

The number of rotations between the initial and final angular velocities is:

Δθ = 6.00 rotations

Using the equation of motion for rotational kinematics with constant angular acceleration:

Δθ = 1/2 α t^2 + ω1 t

where α is the angular acceleration, and t is the time it takes to stop spinning.

At the final angular velocity, ω2 = 0, so we can rearrange the equation to solve for t:

t = ω1 / α

Substituting the given values:

Δθ = 6.00 rotations

ω1 = 4.00 rotations/s

t = (4.00 rotations/s) / α

Solving for α:

Δθ = 1/2 α t^2 + ω1 t

6.00 rotations = 1/2 α (t^2) + (4.00 rotations/s) t

Substituting t = (4.00 rotations/s) / α:

6.00 rotations = 1/2 α [(4.00 rotations/s) / α]^2 + (4.00 rotations/s) [(4.00 rotations/s) / α]

6.00 rotations = 8.00 rotations + 16.00 rotations/s^2 / α

α = 16.00 rotations/s^2 / (6.00 rotations - 8.00 rotations)

α = 8.00 rotations/s^2 / 2.00 rotations

α = 4.00 radians/s^2

Therefore, the magnitude of the angular acceleration of the salad spinner as it slows down is 4.00 radians/s^2.

Part B:

Using the equation of motion for rotational kinematics with constant angular acceleration:

ω2 = ω1 + α t

At the final angular velocity, ω2 = 0, so we can rearrange the equation to solve for t:

t = -ω1 / α

Substituting the given values:

ω1 = 4.00 rotations/s

α = 4.00 radians/s^2

t = -(4.00 rotations/s) / (4.00 radians/s^2)

t = -1.00 s

Since the time cannot be negative, we take the absolute value of t:

t = 1.00 s

Therefore, it takes 1.00 seconds for the salad spinner to come to rest.

To know more about angular acceleration visit;

brainly.com/question/29428475

#SPJ11

Answer:

  124°

Step-by-step explanation:

You want the measure of the angle marked (4+10x) where chords cross. The chords intercept arcs marked (9x+20) and (10x).

The measure of the angle where chords cross is the average of the measures of the intercepted arcs.

  ((9x +20) +(10x))/2 = 4 +10x

  19x +20 = 20x +8 . . . . . . . . . multiply by 2

  12 = x . . . . . . . . . . . . . . subtract (19x+8)

The angle at E is ...

  4 +10(12) = 124

The measure of angle DEC is 124°.

__

Additional comment

Arc DC is 128°; arc BU is 120°.

The equation for the cost of a taxi ride as c = 0.75(d - 0.5) + 3.

Distance traveled refers to the total distance covered by an object or person over a certain period of time or within a given context. It can be measured in units such as meters, kilometers, miles, or any other unit of length.

Equation:

Let d be the distance travelled in kilometres, and let c be the cost in dollars. Then we can write the equation for the cost of a taxi ride as:

c = 0.75(d - 0.5) + 3

This equation takes into account the initial $3.00 fee, as well as the additional $0.75 for every 0.5km

Table:

Distance (km) Cost ($)

0.5 3.38

1 3.75

1.5 4.13

2 4.50

2.5 4.88

3 5.25

3.5 5.63

4 6.00

4.5 6.38

5 6.75

5.5 7.13

6 7.50

6.5 7.88

7 8.25

7.5 8.63

8 9.00

8.5 9.38

9 9.75

9.5 10.13

10 10.50

Graph:

The x-axis represents the distance in kilometers, and the y-axis represents the cost in dollars. We start the graph at (0, 3), and then plot a point at (0.5, 3.75), (1, 4.5), (1.5, 5.25), and so on, until we get to (10, 18). We then draw a line connecting all of these points to create a line graph.

To know more about distance travelled visit:

https://brainly.com/question/29055485

#SPJ1

A quadratic function should have an exponent of 2, a parabola ending its life by going down should have a leading coefficient sign of negative, and either y = x^2 or y = -x^2 can be a valid equation for a quadratic function, with the choice depending on the direction of the desired parabola.

1. The quadratic should have an exponent of 2, as a quadratic is a polynomial of degree 2.
2. A parabola ending its life by going down should have a leading coefficient sign of negative, as this indicates that the quadratic term has a negative coefficient and the parabola opens downwards.
3. Both equations, y = x^2 and y = -x^2, are valid equations for a quadratic function. The main difference between them is the direction in which the parabola opens. The equation y = x^2 represents a parabola that opens upwards, while y = -x^2 represents a parabola that opens downwards. The choice of which equation to use depends on the specific context and the direction of the desired parabola.

Learn more about exponent: https://brainly.com/question/11975096

#SPJ11

The answer to the first question is: Burger Quick, because it has a larger median.

The answer to the second question is: Histogram, because it can show the frequency distribution of the continuous variable "number of carbohydrates" and group the data into intervals.

A histogram is a graphical representation of a distribution of numerical data. It consists of a series of bars, where each bar represents a range of values of the data and the height of the bar indicates the frequency or count of data points falling within that range.

In a histogram, the horizontal axis represents the range of values or intervals of the data, called bins, and the vertical axis represents the frequency or count of data points falling within each bin. The bins can be of equal or unequal width depending on the nature of the data.

Learn more about histogram on:

https://brainly.com/question/2962546

#SPJ1

The watermelon is hitting the ground at around 10.33 seconds.

To find out when the watermelon hits the ground, we need to look for the time when the height of the watermelon is zero. This is because the watermelon will be on the ground at that point.

The x-intercepts of the function h(t) give us the times when the height is zero. So, we know that the watermelon will hit the ground at t = -0.33 seconds and t = 10.33 seconds.

However, the negative value doesn't make sense in this context, so we can ignore that solution. Therefore, the watermelon is hitting the ground at around 10.33 seconds.

Learn more about Speed and Time:  https://brainly.com/question/31756299

#SPJ11

Answer:

The answer is the fourth option - 0.63

Step-by-step explanation:

Dominic will need to save a minimum of $121 per month to pay for his portion of the first year's tuition.

Dominic's parents will pay 80% of the annual tuition cost, which is:

0.8 x $7,260 = $5,808

So, Dominic will need to pay the remaining 20% of the tuition cost, which is:

0.2 x $7,260 = $1,452

Since Dominic has one year to save his portion of the tuition, he will need to save:

$1,452 / 12 months = $121 per month

Therefore, Dominic will need to save a minimum of $121 per month to pay for his portion of the first year's tuition.

To know more about cost , refer here:

https://brainly.com/question/30045916#

#SPJ11

The amount of interest earned by Mr. Jones's retirement account over 5 years is $79,025.

Mr. Jones has invested $410,000 in a retirement account that earns 3.85% simple interest per year. Simple interest is calculated by multiplying the principal amount by the annual interest rate and the time period in years.

In this case, the time period is 5 years. Using the formula for simple interest, we can calculate the amount of interest earned on this investment as:

I = P * r * t = $410,000 * 0.0385 * 5 = $79,025

Therefore, the amount of interest earned by Mr. Jones's retirement account over 5 years is $79,025. This means that the total value of his retirement account after 5 years would be $489,025 ($410,000 + $79,025).

Learn more about interest:

brainly.com/question/30393144

#SPJ4

We can simplify the given expression first and then write it in standard form.

8 × 10 = 80

1 × 1/10 = 1/10

6 × 1/1000 = 6/1000 = 3/500

Adding these three values, we get:

80 + 1/10 + 3/500

To write this in standard form, we need to express it as a single number multiplied by a power of 10. We can do this by finding a common denominator for the fractions and adding them:

80 + 50/500 + 3/500 = 80 + 53/500

Now, we can write this as:

80.106

To express this in standard form, we move the decimal point to the left until there is only one non-zero digit to the left of the decimal point. We moved the decimal point 3 places to the left to get:

8.0106 × 10^1

Therefore, the number in standard form is 8.0106 × 10^1.

The value of x in the given circle is 18.1 units.

Given is a circle, where two radii are given one chord is given,

We need to find the value of the x which is also the radius,

We know all the radii in a circle are equal,

So, here the radius = 7.9+10.2 = 18.1 units.

Hence the value of x in the given circle is 18.1 units.

Learn more about radius click;

https://brainly.com/question/13449316

#SPJ1

Unfortunately, there is no way to answer this question without more information.

We would need to know the amount of the ATM withdrawal, as well as the starting balance before the withdrawal, in order to calculate the ending balance.

For example, if the starting balance was $1500 and the withdrawal was for $50, the ending balance would be $1450.

However, if the starting balance was $1300 and the withdrawal was for $50, the ending balance would be $1250.

Without this information, we cannot determine the correct answer.

To know more about balance refer here

https://brainly.com/question/37441951#

#SPJ11

Answer:

There are 6 goldfish in each of the 3 aquariums at Joe's fish store.

Step-by-step explanation:

To find out how many goldfish are in each aquarium, we can divide the total number of goldfish by the number of aquariums:

Therefore, there are 6 goldfish in each of the 3 aquariums at Joe's fish store.

product rule, chain rule, and sum rule are utilized to assess a subordinate of y = sin(x)cos(x), a subsidiary of y = sin(cos(x)), a subordinate of y = sin(-x), a subsidiary of y = sin(x) + cos(x).

a) subordinate of y = sin(x)cos(x) can be assessed by utilizing the product rule.

[tex]y' = (cos(x))(cos(x)) + (sin(x))(-sin(x)) = cos^2(x) - sin^2(x)[/tex]

b) chain rule is used  to find the derivative of y = sin(cos(x)):

y' = (cos(x))(cos(cos(x)))

c) chain rule is used  to find the derivative of y = sin(-x):

y' = -cos(-x) = -cos(x)

d) derivative of y = sin(x) + cos(x)  can be evaluated by using sum rule

y' = cos(x) - sin(x)

learn more about product rule

brainly.com/question/30117847

#SPJ4

Answer:

135.6 cubic centimeters

Step-by-step explanation:

To find the volume of soda in the cylindrical glass, we need to first find the volume of the glass and then multiply it by 60% to get the volume of soda. The formula for the volume of a cylinder is V = πr^2h, where r is the radius and h is the height.

Substituting the given values, we get:

V = π(3 cm)^2(8 cm) = 72π cm^3

To find the volume of soda, we multiply the volume of the glass by 60% or 0.6:

Volume of soda = 0.6 x 72π cm^3 = 43.2π cm^3

Rounding to the nearest tenth, we get:

Volume of soda ≈ 135.6 cm^3

Therefore, there are approximately 135.7 cubic centimeters of soda in the glass

Answer: 226.3

Step-by-step explanation:

Hello! Here is how to solve this problem.

The formula for volume of a cylinder is V(c) = (B)(h)

The height is 8 cm, and the radius is 3 cm. The base is a circle, so the base area will be 22/7(r)^2. Pi is represented as 3.14 or 22/7, but 22/7 is more accurate.

V(c) = 22/7((3)^2)(8)
V(c) = 22/7(9 x 8)
V(c) = 22/7(72)

V(c) = 226.285714.

So, rounded to the nearest tenth, the volume of the soda can is 226.3 cm^3.

Tips for you:

1. Round to the nearest tenth
2. Use 22/7 for pi unless it says to use 3.14 for pi or use the symbol for pi instead of solving further.

Hope this helps, have a great day!

For a proper use of unit multipliers to convert 24 square feet per minute, the right choice is A.

The proper use of unit multipliers to convert 24 square feet per minute to square inches per second is:

24 ft²/1 min × 12 in/1 ft × 12 in/1 ft × 1 min/60 sec = (24 × 12 × 12)/(1 × 1 × 60) in²/sec

Thus, when these conversion factors are multiplied by the specified value of  24 ft²/1 min:

24 ft²/1 min . 12 in/1 ft . 12 in/1 ft . 1 min/60 sec

= (24 x 12 x 12) in² / (1 x 1 x 1) min x (1 x 1 x 60) sec

= 4,608 in²/sec

Therefore, the correct answer choice is:

24 ft²/1 min . 12 in/1 ft . 12 in/1 ft . 1 min/60 sec.

Find out more on unit multipliers here: https://brainly.com/question/13736702

#SPJ1

The probability of event A or B occurring i.e.,  P(A or B) is 0.67.

Given the table of outcomes and their probabilities, you need to find P(A or B), where A is the event "the outcome is greater than 1" and B is the event "the outcome is greater than or equal to 2".

1: Identify the outcomes that satisfy A or B.

A: Outcomes greater than 1: {2, 3, 4, 5}

B: Outcomes greater than or equal to 2: {2, 3, 4, 5}

A or B: Outcomes greater than 1 or greater than or equal to 2: {2, 3, 4, 5}

2: Calculate the probability of each outcome in the combined set A or B.

Outcome 2: Probability 0.19

Outcome 3: Probability 0.13

Outcome 4: Probability 0.31

Outcome 5: Probability 0.04

3: Add up the probabilities of each outcome in the combined set A or B.

P(A or B) = P(2) + P(3) + P(4) + P(5)

P(A or B) = 0.19 + 0.13 + 0.31 + 0.04

P(A or B) = 0.67

Therefore, the probability of event A or B occurring, where A is "the outcome is greater than 1" and B is "the outcome is greater than or equal to 2", is 0.67.

Learn more about Probability:

https://brainly.com/question/25839839

#SPJ11

Chris must work at least 36 hours to earn a minimum of $300, assuming she sells 15 books and earns the $2 bonus for each book sold.

The inequality that represents the situation is: 7.50h + 2(15) ≥ 300 where "h" represents the number of hours Chris works, and "2(15)" represents the bonus earned for selling 15 books.

The left-hand side of the inequality calculates Chris's total earnings, which is the product of her hourly wage of $7.50 and the number of hours worked, plus the bonus earned for selling 15 books.

The inequality states that the total earnings must be greater than or equal to $300, which is the minimum amount Chris wants to earn. To solve the inequality, we can simplify it by first multiplying 2 and 15 to get 30: 7.50h + 30 ≥ 300

We can isolate "h" by subtracting 30 from both sides: 7.50h ≥ 270. we can solve for "h" by dividing both sides by 7.50: h ≥ 36.

Learn more about inequality here:

https://brainly.com/question/28823603

#SPJ4

An equation representing the statement that 282828 is 121212 less than kkk is kkk = 282828 + 121212.

An equation is a mathematical statement showing that two or more mathematical or algebraic expressions share equality or equivalence.

Equations are represented using the equal symbol (=).

Unlike equations, mathematical expressions do not use the equal symbol.

282828 = kkk - 121212

kkk = 282828 + 121212

Thus, one way of representing the statement that that 282828 is 121212 less than kkk is by forming an equation like kkk = 282828 + 121212.

Learn more about equations at https://brainly.com/question/2972832.

#SPJ1

Cost of field trip remains $2,000 with 150 members

We can set up a proportion to solve for the cost trip with 150 members attending:

Let x be the cost of the field trip for 150 members attending.

The amount of money required is directly proportional to the number of members attending, so we can write:

[tex]100 : 150 = 2000 : x[/tex]

The amount of money required is also inversely proportional to the fundraising money each member raised. Each member raised $15.00 through fundraising, so we can write:

[tex]15 : 15 = x : 2000[/tex]

Simplifying the second proportion, we have:

[tex]1 : 1 = x/2000[/tex]

Multiplying both sides by 2000, we get:

[tex]x = 2000[/tex]

Therefore, the cost of the field trip with 150 members attending and each member raising $15.00 through fundraising would also be $2,000.

Learn more about  cost trip

brainly.com/question/18249048

#SPJ11

The parametric equations for the tangent line to curve C at point P are: x = -t y = 6t - 1 z = 8t + 6

To find the parametric equations for the tangent line to curve C at point P, we need to first find the derivative of the curve at P.

Taking the derivative of each component of the curve, we get:

dx/dt = -1

dy/dt = -6t

dz/dt = 8

At point P = (0, -1, 6), t = -1.

Plugging this into the derivative, we get:

dx/dt = -1

dy/dt = 6

dz/dt = 8

So, the tangent vector to curve C at point P is < -1, 6, 8 >.

To get the parametric equations for the tangent line, we can use the point-slope form: r(t) = P + t< -1, 6, 8 > Plugging in the coordinates of point P, we get: r(t) = <0, -1, 6> + t< -1, 6, 8 > Expanding this out, we get: r(t) = <-t, 6t - 1, 8t + 6>

So, the parametric equations for the tangent line to curve C at point P are: x = -t y = 6t - 1 z = 8t + 6

Learn more about parametric equations,

https://brainly.com/question/30451972

#SPJ11