Find the distance in between the point P( - 4, 2, 1) and the point Q(-1,2,0).

Answer:

for that first u should know that how much litres of water that aquarium can contain.

for that first u should know that how much litres of water that aquarium can contain.so that probably depends upon the size length and width of a container

for that first u should know that how much litres of water that aquarium can contain.so that probably depends upon the size length and width of a containera normal container can be filled with approximately 15 containers

The negative slope indicates a decline in population over the 18-year period. The most accurate statement based on this information is that the city's population experienced a decline of approximately 50 people per year on average between 1953 and 1971.

To compute the slope of the population growth or decline, we need to use the formula:

slope = (y2 - y1) / (x2 - x1)

where y2 is the final population, y1 is the initial population, x2 is the final year, and x1 is the initial year.

Plugging in the values we have:

slope = (2,694,850 - 2,695,750) / (1971 - 1953)

slope = -900 / 18

slope = -50

The negative slope indicates a decline in population over the 18-year period.

To know more about population, refer to the link below:

https://brainly.com/question/1600520#

#SPJ11

The inches of farming the picture require is 45 inches

From the question, we have the following parameters that can be used in our computation:

Base = 5 in

High = 4 in

Scale factor = 2.5

The inches of farming the picture require is calculated as

Perimeter = 2 * (Base + High) * Scale factor

Substitute the known values in the above equation, so, we have the following representation

Perimeter = 2 * (5 + 4) * 2.5

Evaluate

Perimeter = 45

Hence, the inches of farming the picture require 45 inches

Read more about scale factor at

https://brainly.com/question/29229124

#SPJ1

The value of A, B and C from the given equation are 0, 0 and 6 respectively.

The given equation is y=x²+x.

Here, the table is

X   -2 -1   0  1  2

Y    2  A  B  2 C

When x=-1

y=(-1)²-1

y=0

So, A=0

When x=0

y=(0)²+0

y=0

So, B=0

When x=2

y=(2)²+2

y=6

So, C=6

Therefore, the value of A, B and C are 0, 0 and 6 respectively.

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ1

We have shown that xn is bounded and monotone increasing, and its limit is √2. First, we will show that xn is bounded and monotone increasing by induction:

Base Case: For n = 1, we have x1 > 1, which is true.

Inductive Hypothesis: Assume that xn > 1 for some n = k and show that xn+1 > xn for n = k.

Inductive Step:

We have xn+1 := 2−1/xn

Since xn > 1, we have 1/xn < 1

Therefore, 2−1/xn > 2−1/1 = 1/2

So, xn+1 > 1/2

Since xn > 1, we have xn+1 = 2−1/xn < 2−1/1/ = 1

So, 1/2 < xn+1 < 1

Therefore, xn is bounded and monotone increasing.

Next, we will find the limit of xn as n → ∞:

Let L = lim xn as n → ∞

Then, taking the limit on both sides of xn+1 = 2−1/xn, we get:

L = 2−1/L

Multiplying both sides by L, we get:

L2 = 2−1

Solving for L, we get:

L = ±√2

Since xn > 1 for all n, we have L > 1. Therefore, L = √2.

Thus, we have shown that xn is bounded and monotone increasing, and its limit is √2.

Learn more about monotone increasing,

https://brainly.com/question/17177037

#SPJ4

Answer:

The total area of the "i" figure is 5.33 square units.

The figure is made up of a square with side length 4 units, a triangle with base 4 units and height 3 units, and a semi-circle with radius 2 units.

The area of the square is 4^2 = 16 square units.

The area of the triangle is (1/2)(4)(3) = 6 square units.

The area of the semi-circle is (1/2)(pi)(2^2) = 2pi square units.

The total area of the figure is 16 + 6 + 2pi = 5.33 square units (to the nearest hundredth of a unit).

Here is a diagram of the figure with the areas of each shape labeled:

[Image of the "i" figure with the areas of each shape labeled]

The limit of the given function as t approaches 0 is undefined.

To find the limit of the given function,[tex]lim (e^(5t) - 1) / (t × sin(t))[/tex] as t approaches 0, follow these steps:

Observe the given function

[tex]lim (e^(5t) - 1) / (t × sin(t)) as t → 0[/tex]

Apply L'Hopital's Rule, since the limit is of the form 0/0 as t approaches 0.

Differentiate the numerator and denominator with respect to t.

Numerator: [tex]d(e^(5t) - 1)/dt = 5e^(5t)[/tex]

Denominator: [tex]d(t × sin(t))/dt = sin(t) + t × cos(t)[/tex]

Rewrite the function with the new numerator and denominator.

lim [tex](5e^(5t)) / (sin(t) + t × cos(t)) as t → 0[/tex]

Evaluate the limit as t approaches 0.

[tex](5e^(5 × 0)) / (sin(0) + 0 × cos(0)) = 5 / 0[/tex]

Since the denominator is still 0, the limit does not exist.

for such more question on limit

https://brainly.com/question/12017456

#SPJ11

We have found the n-vector b for which bc = p/(a), where p is the polynomial with coefficients c0, c1, ..., cn. Let's start by writing out the polynomial:

[tex]c0 + c1x + c2x^2 + ... + cnx^n[/tex]

The derivative of this polynomial with respect to x is:

[tex]c1 + 2c2x + 3c3x^2 + ... + ncnx^(n-1)[/tex]

At the point x=a, the derivative becomes:

[tex]c1 + 2c2a + 3c3a^2 + ... + ncn*a^(n-1)[/tex]

We want this to be a linear function of the coefficients c0, c1, ..., cn. That means we need to find a vector b such that:

[tex]c1 + 2c2a + 3c3a^2 + ... + ncna^(n-1) = b0c0 + b1c1 + ... + bncn[/tex]

Let's compare coefficients of c0, c1, ..., cn on both sides:

c1 = b1c1

2c2a = b2c2

[tex]3c3a^2 = b3c3[/tex]

...

[tex]ncna^(n-1) = bn*cn[/tex]

We can simplify these equations by dividing both sides by ci (assuming ci is not zero):

b1 = 1

b2 = 2a/c2

[tex]b3 = 3a^2/c3[/tex]

...

[tex]bn = n*a^(n-1)/cn[/tex]

So the vector b we're looking for is:

b = [1, 2a/c2, [tex]3a^2[/tex]/c3, ...,[tex]n*a^(n-1)/cn][/tex]

And if we multiply b by the coefficient vector c, we get:

bc = c1 + 2c2a + [tex]3c3a^2[/tex] + ...[tex]+ ncn*a^(n-1)[/tex] = the derivative of the polynomial at x=a

Therefore, we have found the n-vector b for which bc = p/(a), where p is the polynomial with coefficients c0, c1, ..., cn.

Learn more about n-vector

https://brainly.com/question/14107383

#SPJ4

The discount Joe received is $256 and Joe paid only $1024 for the computer after availing the 20% discount.

Joe purchased a computer that was priced at $1280. However, he was able to avail a discount of 20% off the regular price. To find out the discount that Joe received, we can use a simple formula.

Discount = Regular Price x Discount Rate

In this case, the regular price is $1280 and the discount rate is 20%. Therefore, the discount Joe received is:

Discount = $1280 x 0.20
Discount = $256

So, Joe received a discount of $256 on his purchase of the computer. This means that he paid only $1024 for the computer after availing the 20% discount. It's always important to calculate discounts before making any purchase to ensure you're getting the best deal possible.

To know more about discount, visit:

https://brainly.com/question/31430480#

#SPJ11

When Kirill and Max work together, they can complete 11/60 of the puzzle in one hour.

To find out what part of the puzzle Kirill and Max can complete together in one hour, we need to calculate their combined work rate.

Step 1: Find the work rate of Kirill.
Kirill can complete the puzzle in 10 hours, so his work rate is 1/10 of the puzzle per hour.

Step 2: Find the work rate of Max.
Max can complete the puzzle in 12 hours, so his work rate is 1/12 of the puzzle per hour.

Step 3: Add Kirill's and Max's work rates together.
(1/10) + (1/12) = (12 + 10) / (10 * 12) = 22 / 120

Step 4: Simplify the fraction.
The simplified fraction is 11/60.

So, when Kirill and Max work together, they can complete 11/60 of the puzzle in one hour.

Learn more about time and work,

https://brainly.com/question/13086625

#SPJ11

Compared with an SRS of 900 8th-graders, the margin of error for a 95% confidence interval for mu is smaller when using an SRS of 1600 8th-graders.

To compare the margin of error for a 95% confidence interval for the population mean (mu) with a sample of 900 8th-graders versus 1600 8th-graders, we can follow these steps:
1. Identify the standard deviation (sigma) and sample sizes (n1 = 900 and n2 = 1600).
2. Calculate the standard error for each sample size:
SE1 = sigma / sqrt(n1) = 125 / sqrt(900) = 125 / 30
SE2 = sigma / sqrt(n2) = 125 / sqrt(1600) = 125 / 40

3. Determine the critical value (z-score) for a 95% confidence interval. In this case, it is 1.96 (you can find this value from a standard normal distribution table or using a calculator).
4. Calculate the margin of error for each sample size:
ME1 = z-score * SE1 = 1.96 * (125 / 30)
ME2 = z-score * SE2 = 1.96 * (125 / 40)
5. Compare the margin of errors:
ME1 is larger than ME2.

To know more about confidence interval  click here

brainly.com/question/31420373

#SPJ11

The transformation of f(x) to g(x) involves a horizontal shift and a reflection. The function g(x) is a transformed version of f(x) obtained by translating f(x) to the left by 2 units along the x-axis.

Specifically, to obtain g(x) from f(x), we first shift f(x) two units to the left, and then we take the absolute value of the result.

This means that the graph of g(x) will be the same as the graph of f(x) for all values of x greater than or equal to -2, but will be reflected across the y-axis for all values of x less than -2.

In other words, the transformation of f(x) to g(x) involves a horizontal shift and a reflection.

To know more about absolute value, refer here:

https://brainly.com/question/4691050#

#SPJ11

The situations that can be modeled with an equation include the following:

A. The sale price of a television is $125 off of the original price.

C. Marco spent twice as much as Owen.

E. Ben paid a total of $75 for a shirt and a pair of shoes.

In Mathematics and Geometry, an equation can be defined as a mathematical expression which shows that two (2) or more thing are equal. This ultimately implies that, an equation is composed of two (2) expressions that are connected by an equal sign.

Assuming the variable x represent the independent variable and y represents the dependent variable, we have the following equations;

"The sale price of a television is $125 off of the original price."

y = x - 125

"Marco spent twice as much as Owen."

y = 2x

"Ben paid a total of $75 for a shirt and a pair of shoes."

x + y = 75

Read more on equation and price here: https://brainly.com/question/8910096

#SPJ1

Complete Question:

Select all the situations that can be modeled with an equation.

The sale price of a television is $125 off of the original price.

Anna gave away 5 hats.

Marco spent twice as much as Owen.

Susan earns $25 per day for d days.

Ben paid a total of $75 for a shirt and a pair of shoes.

The values that satisfy the inequality -1/2x + 5>7 are -8 and -6.

To determine which values from the set {-8, -6, -4, -1, 0, 2} satisfy the inequality -1/2x + 5 > 7, we first need to isolate the variable x. Start by subtracting 5 from both sides of the inequality:

-1/2x > 2

Now, multiply both sides by -2 to solve for x. Remember that when you multiply or divide both sides of an inequality by a negative number, you must reverse the inequality sign:

x < -4

Now we can see that the inequality is asking for all values of x that are less than -4. Looking at the given set {-8, -6, -4, -1, 0, 2}, we can identify the values that satisfy this condition:

-8 and -6 are the values that are less than -4.

Therefore, the values from the set {-8, -6, -4, -1, 0, 2} that satisfy the inequality -1/2x + 5 > 7 are -8 and -6.

Learn more about inequality here: https://brainly.com/question/30238989

#SPJ11

The angle θ lies in Quadrant I given that cos(θ) > 0 and sin(θ) > 0.

Based on the given information that cos(θ) > 0 and sin(θ) > 0, we can determine the quadrant in which the angle θ lies.

Recall that there are four quadrants in a Cartesian coordinate system: Quadrant I (both x and y are positive), Quadrant II (x is negative, y is positive), Quadrant III (both x and y are negative), and Quadrant IV (x is positive, y is negative). The cosine function, cos(θ), represents the x-coordinate of a point on the unit circle, while the sine function, sin(θ), represents the y-coordinate.

Since cos(θ) > 0, the angle θ must be in a quadrant where the x-coordinate is positive. This means that θ can lie in either Quadrant I or Quadrant IV. Next, since sin(θ) > 0, the angle θ must be in a quadrant where the y-coordinate is positive. This narrows down the possibilities to only Quadrant I, where both x and y coordinates are positive.

Therefore, the angle θ lies in Quadrant I given that cos(θ) > 0 and sin(θ) > 0.

To know more about Cartesian coordinate system, refer to the link below:

https://brainly.com/question/4726772#

#SPJ11

This means that in the population represented by the formula, someone with a femur length of 27.4 centimeters would be expected to have a height of 128 centimeters

When h is 128, we can use the formula h = 2.46f + 60.6 to solve for the corresponding value of f.

128 = 2.46f + 60.6

Subtracting 60.6 from both sides:

67.4 = 2.46f

Dividing both sides by 2.46:

f ≈ 27.4

Therefore, when h is 128, the f-value (length of the femur) is approximately 27.4 centimeters. This means that in the population represented by the formula, someone with a femur length of 27.4 centimeters would be expected to have a height of 128 centimeters.

To learn more about femur go to:

https://brainly.com/question/9454759#

#SPJ11

In a binomial experiment consisting of five trials, the number of different values that x (the number of successes) can assume is 6.

A binomial experiment is a statistical experiment that meets four specific conditions: there are a fixed number of trials, each trial is independent of one another, there are only two possible outcomes (success or failure) in each trial, and the probability of success remains constant throughout the trials.

In this case, the binomial experiment consists of five trials, so the possible outcomes for x (the number of successes) can range from 0 successes to all 5 successes. To find the number of different values x can assume, simply add 1 to the total number of trials, as it includes the case of 0 successes.

Therefore, x can take on the following values: 0, 1, 2, 3, 4, or 5. As there are 6 possible values for x, the number of different values that x can assume in a binomial experiment consisting of five trials is 6.

To know more about binomial experiment, visit:

https://brainly.com/question/15351475#

#SPJ11

We get that the plane is about 2193.0 feet from the airport, Rounding to the nearest tenth

To solve the problem, we will use trigonometry and the tangent function, which relates the other facet of a right triangle to the adjoining aspect:

tan(theta) = opposite / adjacent

wherein theta is the angle of descent, opposite is the change in height, and adjacent is the space from the airplane to the airport.

Rearranging the formula, we get:

adjacent = contrary / tan(theta)

because the angle of descent is 13 ranges and the alternate in height is from 500 ft, we've got:

contrary = 500 ft

theta = 13 stages

Substituting these values into the formula, we get:

adjacent = 500 ft / tan(13 ranges)

using a calculator, we find that tan(13 stages) is about 0.228, so:

adjacent = 500 feet / 0.228 = 2192.98 feet

Therefore, we get that the plane is about 2193.0 feet from the airport.

Learn more about tangent function:-

https://brainly.com/question/1533811

#SPJ4

The best-fitting model for the data and its corresponding R2 value need to be calculated.

To find the model that best fits the data and its corresponding R2 value, we would need to perform linear regression analysis on the data. However, since the data table is not provided, we cannot provide an answer to this question.

Linear regression analysis is a statistical method used to model the relationship between two variables. In this case, the variables are the year and the number of insect species encountered on each trip. By analyzing the data, we can determine the equation of the line that best fits the data and the R2 value, which represents the proportion of the variance in the data that is accounted for by the model. A higher R2 value indicates a better fit between the model and the data.

Learn more about R2 value

brainly.com/question/10598720

#SPJ11

The order of the volumes of the boxes from least to greatest is  Box D, Box B, Box C, Box A. Therefore, the correct option is D.

To determine the order of the volumes of the boxes from least to greatest, we will first calculate the volume of each box using the formula:

Volume = Length × Width × Height.

Hence,

1. Box A: Volume = 2in × 4.5in × 6in = 54 cubic inches

2. Box B: Volume = 6in × 2.5in × 3in = 45 cubic inches

3. Box C: Volume = 5in × 4.5in × 2.25in = 50.625 cubic inches

4. Box D: Volume = 2.5in × 2.25in × 3in = 16.875 cubic inches

Now, arrange the volumes in ascending order:

Box D (16.875), Box B (45), Box C (50.625), Box A (54)

Thus, the correct answer is D: Box D, Box B, Box C, Box A.

Note: The question is incomplete. The complete question probably is: The table shows the dimensions of four boxes. Which is the order of the volumes of the boxes from least to greatest?

          Length Width Height

Box A 2in; 4.5in; 6in

Box B 6in; 2.5in; 3in

Box C 5in; 4.5in; 2.25in

Box D 2.5in; 2.25in; 3in

A) Box A Box B, Box C, Box D B) Box A, Box C, Box B, Box D C) Box B, Box D, Box A, Box C D) Box D, Box B, Box C, Box A.

Learn more about Volume:

https://brainly.com/question/1972490

#SPJ11

Answer: We can use the formula Distance = Average speed x time to verify whether Dr Seroto left his office at exactly 10:50.

Let t be the time Dr Seroto left his office. Then, the time he arrived at the school can be expressed as:

t + (Distance/Average speed) = 11:20

We know that the distance is 45 km and the average speed is 100 km/hour. Substituting these values, we get:

t + (45/100) = 11:20

We need to convert the time on the right-hand side to hours. 11:20 can be written as:

11 + 20/60 = 11.33 hours

Substituting this value, we get:

t + 0.45 = 11.33

Solving for t, we get:

t = 11.33 - 0.45

t = 10.88 hours

This is not equal to 10:50, which is 10.83 hours. Therefore, Dr Seroto did not leave his office at exactly 10:50.

Answer:

11

Step-by-step explanation:

23-12=11

The estimated quantity of the substance at t = 1.2 is approximately 140.018.

The given differential equation is: dZ/dt = 1/20Z

Separating variables and integrating, we have:

∫ Z dZ = ∫ 1/20 dt

1/2 Z^2 = 1/20 t + C

where C is the constant of integration.

Using the given initial condition Z(1) = 140, we can solve for C:

1/2 (140)^2 = 1/20 (1) + C

C = 9800 - 70 = 9730

So, the equation that models the quantity of the substance is:

1/2 Z^2 = 1/20 t + 9730

Now, we can use linear approximation to estimate the quantity of the substance at t = 1.2, based on the information at t = 1.

The linear approximation formula is:

L(x) = f(a) + f'(a) * (x - a)

where a is the known point and f'(a) is the derivative of the function at a.

In this case, a = 1, so we have:

Z(1.2) ≈ Z(1) + Z'(1) * (1.2 - 1)

To find Z'(1), we take the derivative of the function:

Z(t) = √(40t + 194600)

Z'(t) = (40/2) * (40t + 194600)^(-1/2) * 40

Z'(t) = 800/(40t + 194600)^(1/2)

So, at t = 1, we have:

Z'(1) = 800/(40(1) + 194600)^(1/2) ≈ 0.0898

Now, we can use the linear approximation formula to estimate Z(1.2):

Z(1.2) ≈ Z(1) + Z'(1) * (1.2 - 1)

Z(1.2) ≈ 140 + 0.0898 * 0.2

Z(1.2) ≈ 140.018

Therefore, based on this model, the estimated quantity of the substance at t = 1.2 is approximately 140.018.

To learn more about estimated quantity visit: https://brainly.com/question/29944313

#SPJ11

The sets (2,6) and [1,5] are not the same mathematically  but they do have some overlap.

The first pair, (2,6), signifies a number line interval that is open and commences at 2, concluding at 6, while excluding the endpoints.

So one can say that the closed interval on the number line between 1 and 5, including both endpoints, is represented by the set [1,5]. any integer that is seen between 1 and 5, inclusive, is included in this set.

Although there is some similarity between the two groups, namely the presence of numbers 2 to 5, they are distinct from each other. The numerical interval (2,6) does not contain the values 2 and 6, whereas those two numbers are part of the range [1,5].

Learn more about sets from

https://brainly.com/question/13458417

#SPJ4

See transcribed text below

Mathematically these two sets are the same or are they a way of rewriting the other or are they different? (2,6) and [1,5]

If the triangle is isosceles, then the measure of the third angle could be 42 degrees

From the question, we have the following parameters that can be used in our computation:

The sum of angles in a triangle is 180 degrees

If the triangle is isosceles, then we have the following possible sum of angles

Sum 1 = 42 + 96 + 96 = 234 -- false

Sum 1 = 42 + 96 + 42 = 180 -- true

Hence, if the triangle is isosceles, then the measure of the third angle could be 42 degrees

Read mroe about triangles at

https://brainly.com/question/14386546

#SPJ1

(a)We can use these values to calculate the primary trigonometric ratios:

sin(ZA) = o/h ≈ 0.139

cos(ZA) = a/h ≈ -0.998

tan(ZA) = o/a ≈ -0.14

(b) The same sine as ZA but different signs for the other two primary trigonometric ratios can be found by reflecting point (-5, 0.7) across the x-axis.

(c)We use inverse trigonometric functions on primary ratios ZA ≈ 7 degrees, B ≈ -7 degrees.

To determine the primary trigonometric ratios for ZA, we first need to find the values of the adjacent, opposite, and hypotenuse sides of the right triangle that contains point (-5, 0.7) as one of its vertices. We can use the Pythagorean theorem to find the hypotenuse:

h = sqrt((-5)² + 0.7²) ≈ 5.02

The adjacent side is negative since the point is to the left of the origin, so:

a = -5

The opposite side is positive since the point is above the x-axis, so:

o = 0.7

Now we can use these values to calculate the primary trigonometric ratios:

sin(ZA) = o/h ≈ 0.139

cos(ZA) = a/h ≈ -0.998

tan(ZA) = o/a ≈ -0.14

To find a point B with the same sine as ZA but different signs for the other two primary trigonometric ratios, we can reflect point (-5, 0.7) across the x-axis. This gives us point (-5, -0.7), which has the same sine but opposite sign for the cosine and tangent:

sin(B) = sin(ZA) ≈ 0.139

cos(B) = -cos(ZA) ≈ 0.998

tan(B) = -tan(ZA) ≈ -0.14

To find the measures of ZA and B to the nearest degree, we can use inverse trigonometric functions on their primary ratios. Using a calculator, we get:

ZA ≈ 7 degrees

B ≈ -7 degrees (Note: this is equivalent to 353 degrees since angles are periodic).

Learn more about primary trigonometric

brainly.com/question/31693437

#SPJ11

Answer:

( 5 , 5½ )

Step-by-step explanation:

It's simple actually, use the midpoint formula,

[tex] \frac{x1 + x2}{2} ... \frac{y1 + y2}{2} = ( \frac{8 + 2}{2} ... \frac{4 + 7}{2} ) = (5..5 \frac{1}{2} )[/tex]

Take the ... as a comma.

So the final answer is ( 5 , 5.5 )

The derivative formula of the given function f(x) is:

f'(x) = 2√(7x+8) + 7x/(√(7x+8))

This formula gives the value of the derivative of the function f(x) for any value of x.

The derivative of f(x) using the product rule and chain rule:

f'(x) = 2√(7x+8) + 2x(1/2)(7x+8)^(-1/2)(7)

f'(x) = 2√(7x+8) + 7x/(√(7x+8))

Simplify the derivative

The derivative of the function f(x) is given by f'(x) = 2√(7x+8) + 7x/(√(7x+8))

In this formula, the first term represents the derivative of the function 2x√(7x+8) using the chain rule, and the second term represents the derivative of the function 96, which is a constant and has a derivative of zero.

Learn more about Derivative

brainly.com/question/30365299

#SPJ11